The document provides step-by-step instructions for disassembling and assembling a travel motor. It begins with removing the travel motor and cleaning it. Then it describes dismantling the various components like the head, barrel assembly, piston guide, and brake piston. Precise steps are given to disassemble seals, plates, and other parts. The assembly section reverses the process and provides details on installing components in the correct order and orientation while applying lubricants. Proper tool use and safety precautions are emphasized throughout.
Caterpillar Cat 315D L Excavator (Prefix JHA) Service Repair Manual (JHA00001...orrf0370383
The document provides step-by-step instructions for disassembling and assembling a travel motor. It begins by describing how to disassemble the travel motor by removing 27 different components and parts. These include removing the head, brake piston, barrel assembly, cam plate and more. It then describes the 25 steps to assemble the travel motor, putting in place components like the shaft assembly, piston guide, friction plates and more. Precise installation of seals, rings and alignment of parts is emphasized to prevent damage during reassembly.
Caterpillar Cat 315D L Excavator (Prefix JHA) Service Repair Manual Instant D...rishang96299
The document provides step-by-step instructions for disassembling and assembling a travel motor. It lists 27 steps for disassembly, which include removing components like the head, brake piston, barrel assembly, and shaft assembly. It then lists 26 steps for assembly, which describe cleaning components and installing them in reverse order, like pressing the shaft assembly into the body and installing the barrel assembly while keeping the cam plate engaged. Precautions are given to prevent damage and ensure correct alignment of parts.
Caterpillar Cat 315D L Excavator (Prefix JHA) Service Repair Manual Instant D...shanruliu7360
The document provides step-by-step instructions for disassembling and assembling a travel motor. It begins with disassembly, including removing 27 individual parts like the head, brake piston, barrel assembly, and shaft. The assembly section then lists 28 steps to reinstall these parts in reverse order, making sure components like the cam plate and piston shoe assemblies are correctly aligned. Special tools and precautions are noted to properly complete the process.
Caterpillar Cat 315D L Excavator (Prefix JHA) Service Repair Manual (JHA00001...jdksmmdmdd
The document provides step-by-step instructions for disassembling and assembling a travel motor. It begins with disassembly, including removing 27 individual parts like the head, brake piston, barrel assembly, and shaft. The assembly section then lists 28 steps to reinstall these parts in reverse order, making sure components like the cam plate and piston shoe assemblies are correctly positioned. Special tools and precautions are noted to ensure proper reassembly.
Caterpillar Cat 315D L Excavator (Prefix JHA) Service Repair Manual (JHA00001...dujkdksmdmdm
This document provides instructions for disassembling and assembling a travel motor. The disassembly process includes 27 steps to remove components like the head, brake piston, barrel assembly, shoe retainer, and shaft. The assembly section lists 28 steps to reinstall these components in the reverse order, noting that alignment marks and original locations must be followed to ensure proper reassembly. Precautions are provided to contain fluids, retain component identification, and install keys and pins correctly.
Caterpillar Cat 315D L Excavator (Prefix JHA) Service Repair Manual (JHA00001...fuusejkddmmd3e
The document provides step-by-step instructions for disassembling and assembling a travel motor. It begins with disassembly, including removing 27 individual parts like the head, brake piston, barrel assembly components, and shaft. The assembly section then lists 28 steps to reinstall these parts in reverse order, making sure components like the cam plate and piston shoe assemblies are correctly aligned. Special tools and precautions are noted to ensure proper reassembly.
Caterpillar Cat 315D L Excavator (Prefix JHA) Service Repair Manual Instant D...kubei069369925
The document provides step-by-step instructions for disassembling and assembling a travel motor. It lists 27 steps for disassembly, which include removing components like the head, brake piston, barrel assembly, and shaft assembly. It then lists 26 steps for assembly, which describe cleaning components and installing them in reverse order, like installing the shaft assembly, barrel assembly, brake piston, and head. Precise alignment of parts and use of identification marks are emphasized to ensure correct reassembly.
Caterpillar Cat 315D L Excavator (Prefix JHA) Service Repair Manual (JHA00001...fujkse9didkke3
The document provides step-by-step instructions for disassembling and assembling a travel motor. It begins with disassembly, including removing 27 individual parts like the head, brake piston, barrel assembly, and shaft. The assembly section then lists 28 steps to reinstall these parts in reverse order, making sure components like the cam plate and piston shoe assemblies are correctly aligned. Special tools and precautions are noted to properly complete the process.
Caterpillar Cat 315D L Excavator (Prefix JHA) Service Repair Manual (JHA00001...orrf0370383
The document provides step-by-step instructions for disassembling and assembling a travel motor. It begins by describing how to disassemble the travel motor by removing 27 different components and parts. These include removing the head, brake piston, barrel assembly, cam plate and more. It then describes the 25 steps to assemble the travel motor, putting in place components like the shaft assembly, piston guide, friction plates and more. Precise installation of seals, rings and alignment of parts is emphasized to prevent damage during reassembly.
Caterpillar Cat 315D L Excavator (Prefix JHA) Service Repair Manual Instant D...rishang96299
The document provides step-by-step instructions for disassembling and assembling a travel motor. It lists 27 steps for disassembly, which include removing components like the head, brake piston, barrel assembly, and shaft assembly. It then lists 26 steps for assembly, which describe cleaning components and installing them in reverse order, like pressing the shaft assembly into the body and installing the barrel assembly while keeping the cam plate engaged. Precautions are given to prevent damage and ensure correct alignment of parts.
Caterpillar Cat 315D L Excavator (Prefix JHA) Service Repair Manual Instant D...shanruliu7360
The document provides step-by-step instructions for disassembling and assembling a travel motor. It begins with disassembly, including removing 27 individual parts like the head, brake piston, barrel assembly, and shaft. The assembly section then lists 28 steps to reinstall these parts in reverse order, making sure components like the cam plate and piston shoe assemblies are correctly aligned. Special tools and precautions are noted to properly complete the process.
Caterpillar Cat 315D L Excavator (Prefix JHA) Service Repair Manual (JHA00001...jdksmmdmdd
The document provides step-by-step instructions for disassembling and assembling a travel motor. It begins with disassembly, including removing 27 individual parts like the head, brake piston, barrel assembly, and shaft. The assembly section then lists 28 steps to reinstall these parts in reverse order, making sure components like the cam plate and piston shoe assemblies are correctly positioned. Special tools and precautions are noted to ensure proper reassembly.
Caterpillar Cat 315D L Excavator (Prefix JHA) Service Repair Manual (JHA00001...dujkdksmdmdm
This document provides instructions for disassembling and assembling a travel motor. The disassembly process includes 27 steps to remove components like the head, brake piston, barrel assembly, shoe retainer, and shaft. The assembly section lists 28 steps to reinstall these components in the reverse order, noting that alignment marks and original locations must be followed to ensure proper reassembly. Precautions are provided to contain fluids, retain component identification, and install keys and pins correctly.
Caterpillar Cat 315D L Excavator (Prefix JHA) Service Repair Manual (JHA00001...fuusejkddmmd3e
The document provides step-by-step instructions for disassembling and assembling a travel motor. It begins with disassembly, including removing 27 individual parts like the head, brake piston, barrel assembly components, and shaft. The assembly section then lists 28 steps to reinstall these parts in reverse order, making sure components like the cam plate and piston shoe assemblies are correctly aligned. Special tools and precautions are noted to ensure proper reassembly.
Caterpillar Cat 315D L Excavator (Prefix JHA) Service Repair Manual Instant D...kubei069369925
The document provides step-by-step instructions for disassembling and assembling a travel motor. It lists 27 steps for disassembly, which include removing components like the head, brake piston, barrel assembly, and shaft assembly. It then lists 26 steps for assembly, which describe cleaning components and installing them in reverse order, like installing the shaft assembly, barrel assembly, brake piston, and head. Precise alignment of parts and use of identification marks are emphasized to ensure correct reassembly.
Caterpillar Cat 315D L Excavator (Prefix JHA) Service Repair Manual (JHA00001...fujkse9didkke3
The document provides step-by-step instructions for disassembling and assembling a travel motor. It begins with disassembly, including removing 27 individual parts like the head, brake piston, barrel assembly, and shaft. The assembly section then lists 28 steps to reinstall these parts in reverse order, making sure components like the cam plate and piston shoe assemblies are correctly aligned. Special tools and precautions are noted to properly complete the process.
Caterpillar cat 315 d l excavator (prefix jha) service repair manual (jha0000...dkdmidkkdk
This document provides instructions for disassembling and assembling a travel motor. The disassembly process includes 27 steps to remove components like the head, brake piston, barrel assembly, shoe retainer, and shaft. The assembly section outlines 13 steps starting with installing retaining rings on the shaft and ending by engaging the cam plate with keys in the motor body. Proper cleaning, alignment marks, and lubrication are emphasized throughout.
Caterpillar Cat 315D L Excavator (Prefix JHA) Service Repair Manual (JHA00001...fjkdksmmdm
The document provides step-by-step instructions for disassembling and assembling a travel motor. It lists 27 steps for disassembly, which include removing components like the head, brake piston, barrel assembly, and shaft assembly. It then lists 26 steps for assembly, which describe cleaning components and installing them in reverse order, like pressing the shaft assembly into the body and installing the barrel assembly while keeping the cam plate engaged. Precautions are given to prevent damage and ensure correct alignment of parts.
Caterpillar cat 315 d l excavator (prefix jha) service repair manual (jha0000...fjsekdmmeed
The document provides instructions for disassembling and assembling a travel motor. It lists 27 steps for disassembly that include removing the head, check valves, fittings, brake piston, friction plates, and other components. It then lists 26 steps for assembly that describe cleaning and installing components like the shaft assembly, cam plate, barrel assembly, brake piston, and seals in the reverse order of disassembly. Precise alignment of parts and use of identification marks are emphasized to ensure correct reassembly.
Caterpillar cat 315 d l excavator (prefix jha) service repair manual (jha0000...fjjsekkdmme
The document provides instructions for disassembling and assembling a travel motor. It lists 27 steps for disassembly that include removing the head, check valves, fittings, brake piston, friction plates, and other components. It then lists 26 steps for assembly that describe cleaning and installing components like the shaft assembly, cam plate, barrel assembly, brake piston, and seals in the reverse order of disassembly. Precise alignment of parts and use of identification marks are emphasized to ensure correct reassembly.
Caterpillar Cat 315D L Excavator (Prefix CJN) Service Repair Manual (CJN00001...orrf0370383
The document provides instructions for disassembling and assembling a travel motor. It lists 27 steps for disassembly that include removing bolts, seals, plates, and other components. It then lists 26 steps for assembly, which involves cleaning components, applying seals and lubricants, and reinstalling components in reverse order of disassembly. Special care must be taken to align parts properly and not damage surfaces.
Caterpillar Cat 315D L Excavator (Prefix CJN) Service Repair Manual Instant D...kubei069369925
The document provides instructions for disassembling and assembling a travel motor. It lists 27 steps for disassembly that include removing the head, brake piston, barrel assembly, and other components. It then lists 26 steps for assembly, putting the components back together in reverse order and noting proper installation of seals, springs, and other parts. Precautions are provided to ensure correct alignment of parts and prevent damage during assembly.
Caterpillar Cat 315D L Excavator (Prefix CJN) Service Repair Manual (CJN00001...jdksmmdmdd
This document provides instructions for disassembling and assembling a travel motor. The disassembly process involves 27 steps to remove components from the travel motor in the correct order. This includes removing the head, brake piston, barrel assembly, shoe retainer, and shaft assembly. The assembly process reverses the disassembly with 27 steps and provides notices to ensure proper installation of seals, keys, and other components.
Caterpillar Cat 315D L Excavator (Prefix CJN) Service Repair Manual Instant D...shanruliu7360
The document provides instructions for disassembling and assembling a travel motor. It lists 27 steps for disassembly that include removing the head, brake piston, barrel assembly, and other components. It then lists 26 steps for assembly, putting the components back together in reverse order and noting proper installation of seals, springs, and other parts. Precautions are provided to ensure correct alignment of parts and prevent damage during assembly.
Caterpillar Cat 315D L Excavator (Prefix CJN) Service Repair Manual Instant D...rishang96299
The document provides instructions for disassembling and assembling a travel motor. It lists 27 steps for disassembly that include removing the head, brake piston, barrel assembly, and other components. It then lists 26 steps for assembly, putting the components back together in reverse order and noting proper installation of seals, springs, and other parts. Precautions are provided to ensure correct alignment of parts and prevent damage during assembly.
Caterpillar Cat 315D L Excavator (Prefix CJN) Service Repair Manual (CJN00001...fuusejkddmmd3e
The document provides instructions for disassembling and assembling a travel motor. It lists 27 steps for disassembly that include removing the head, brake piston, barrel assembly, and other components. It then lists 26 steps for assembly, putting the components back together in reverse order and noting proper installation of seals, springs, and other parts. Precautions are provided to ensure correct alignment of parts and prevent damage during assembly.
Caterpillar Cat 315D L Excavator (Prefix CJN) Service Repair Manual (CJN00001...dujkdksmdmdm
This document provides instructions for disassembling and assembling a travel motor. The disassembly process involves 27 steps to remove components from the travel motor in the correct order. This includes removing the head, brake piston, barrel assembly, shoe retainer, and shaft assembly. The assembly process reverses the disassembly with 27 steps and provides notices to ensure proper installation of seals, keys, and other components.
Caterpillar Cat 315D L Excavator (Prefix CJN) Service Repair Manual (CJN00001...fujkse9didkke3
The document provides instructions for disassembling and assembling a travel motor. It lists 27 steps for disassembly that include removing bolts, seals, plates, and other components. It then lists 26 steps for assembly, which involves cleaning components, applying seals and lubricants, and reinstalling components in reverse order of disassembly. Special care must be taken to align parts properly and not damage surfaces.
Caterpillar cat 315 d l excavator (prefix cjn) service repair manual (cjn0000...dkdmidkkdk
This document provides instructions for disassembling and assembling a travel motor. The disassembly process involves 27 steps to remove components from the travel motor body and head. Key steps include removing the head, brake piston, barrel assembly, shoe retainer and piston shoe assemblies. The assembly process reverses the disassembly with 27 corresponding steps, applying sealant and lubricant as needed and ensuring proper alignment of components.
Caterpillar Cat 315D L Excavator (Prefix CJN) Service Repair Manual (CJN00001...fjkdksmmdm
This document provides instructions for disassembling and assembling a travel motor. The disassembly process involves 27 steps to remove components from the travel motor in the correct order. This includes removing the head, brake piston, barrel assembly, shoe retainer, and shaft assembly. The assembly process reverses the disassembly with 27 steps and provides notices to ensure proper installation of seals, keys, and other components.
1) The document provides disassembly and assembly instructions for the final drive of a 318C excavator.
2) It lists required tools and parts and gives step-by-step instructions to disassemble components like the cover, planetary assembly, ring gear, and carrier.
3) The assembly section instructs to clean all parts thoroughly and replace all seals before reinstalling components like the support ring, planetary gears, and retainer nut in the reverse order of disassembly.
Caterpillar Cat 318D2 and 318D2 L Excavator (Prefix SGB) Service Repair Manua...ze6074xunong
This document provides instructions for disassembling and assembling the final drive of a 318D2 excavator. It lists the required tools and outlines 33 steps to disassemble the final drive components such as the cover, carrier assembly, ring gears, and housing. It then describes 28 steps to reassemble the final drive, including preloading the bearings, installing seals and pins, and reassembling the carrier assembly components. Cleanliness is emphasized throughout to prevent dirt from entering internal mechanisms during disassembly and assembly.
Caterpillar Cat 318C, 318C L and 318C LN Excavator (Prefix MDY) Service Repai...ze6074xunong
This document provides instructions for disassembling and assembling the final drive of a 318C excavator. It lists the required tools and presents 33 steps to disassemble the final drive by removing components like the cover, carrier assembly, ring gears, and housing. It then lists 7 notes and 28 steps to reassemble the final drive by installing components like seals, bearings, shims, and housing pieces in the reverse order of disassembly. The goal is to carefully disassemble and reassemble the final drive while cleaning parts and applying sealant or anti-seize compound where needed.
Caterpillar Cat 318D L Excavator (Prefix ZKJ) Service Repair Manual Instant D...ze6074xunong
This document provides instructions for disassembling and assembling the final drive of a 318D L excavator. It lists the required tools and presents 33 steps for disassembly, including removing the final drive cover, carrier assembly, ring gears, and other components. It then lists 13 steps for assembly, including installing bearings in the main housing, preloading the bearings to determine the correct shim thickness, installing seals and gears, and reassembling disassembled components. The goal is to disassemble and clean all parts before precise reassembly in the reverse order of disassembly.
Caterpillar Cat 318D2 L Excavator (Prefix DPJ) Service Repair Manual Instant ...ze6074xunong
This document provides instructions to disassemble the final drive of a 318D2 L excavator. It lists the required tools and presents 33 steps to fully disassemble the final drive and its components. Key steps include removing the final drive assembly and mounting it to a repair stand, removing plugs and springs from the assembly while taking safety precautions for released spring forces, and using lifting devices to remove heavier internal components like the carrier assembly. The goal is to fully separate all individual parts for inspection or replacement.
Caterpillar Cat 318C, 318C L and 318C LN Excavator (Prefix GPA) Service Repai...ze6074xunong
This document provides instructions for disassembling and assembling the final drive of a 318C excavator. It lists the required tools and presents 33 steps for disassembly, including removing the final drive sprocket, carrier assembly, ring gears, and other components. It then lists notes on cleanliness and provides 14 steps for reassembling the final drive, including installing bearings, shims, and seals. The purpose is to provide maintenance technicians with a procedure for taking apart and rebuilding the excavator's final drive system.
This document provides instructions for removing and installing various engine components on a 299D XHP Compact Track Loader, including the diesel particulate filter, air inlet heater, inlet manifold, and inlet and exhaust valves. The procedures describe disconnecting wiring harnesses, removing mounting bolts, and installing replacement parts in the reverse order of removal, taking safety precautions for hot components. Tools required include goggles, gloves, a respirator, and specialty tools for compressing valve springs.
Caterpillar Cat 257D MULTI TERRAIN LOADER (Prefix EZW) Service Repair Manual ...ze6074xunong
The document provides instructions for removing and installing a piston pump on a 257D Multi Terrain Loader. It lists required tools and outlines a step-by-step process including disconnecting hoses and harnesses, using lifting tools to support the pump, and removing bolts. The reassembly process is described in reverse order, noting steps like applying thread lock compound and centering the swashplate.
More Related Content
Similar to Caterpillar Cat 319D L and 319D LN Excavator (Prefix FMH) Service Repair Manual Instant Download.pdf
Caterpillar cat 315 d l excavator (prefix jha) service repair manual (jha0000...dkdmidkkdk
This document provides instructions for disassembling and assembling a travel motor. The disassembly process includes 27 steps to remove components like the head, brake piston, barrel assembly, shoe retainer, and shaft. The assembly section outlines 13 steps starting with installing retaining rings on the shaft and ending by engaging the cam plate with keys in the motor body. Proper cleaning, alignment marks, and lubrication are emphasized throughout.
Caterpillar Cat 315D L Excavator (Prefix JHA) Service Repair Manual (JHA00001...fjkdksmmdm
The document provides step-by-step instructions for disassembling and assembling a travel motor. It lists 27 steps for disassembly, which include removing components like the head, brake piston, barrel assembly, and shaft assembly. It then lists 26 steps for assembly, which describe cleaning components and installing them in reverse order, like pressing the shaft assembly into the body and installing the barrel assembly while keeping the cam plate engaged. Precautions are given to prevent damage and ensure correct alignment of parts.
Caterpillar cat 315 d l excavator (prefix jha) service repair manual (jha0000...fjsekdmmeed
The document provides instructions for disassembling and assembling a travel motor. It lists 27 steps for disassembly that include removing the head, check valves, fittings, brake piston, friction plates, and other components. It then lists 26 steps for assembly that describe cleaning and installing components like the shaft assembly, cam plate, barrel assembly, brake piston, and seals in the reverse order of disassembly. Precise alignment of parts and use of identification marks are emphasized to ensure correct reassembly.
Caterpillar cat 315 d l excavator (prefix jha) service repair manual (jha0000...fjjsekkdmme
The document provides instructions for disassembling and assembling a travel motor. It lists 27 steps for disassembly that include removing the head, check valves, fittings, brake piston, friction plates, and other components. It then lists 26 steps for assembly that describe cleaning and installing components like the shaft assembly, cam plate, barrel assembly, brake piston, and seals in the reverse order of disassembly. Precise alignment of parts and use of identification marks are emphasized to ensure correct reassembly.
Caterpillar Cat 315D L Excavator (Prefix CJN) Service Repair Manual (CJN00001...orrf0370383
The document provides instructions for disassembling and assembling a travel motor. It lists 27 steps for disassembly that include removing bolts, seals, plates, and other components. It then lists 26 steps for assembly, which involves cleaning components, applying seals and lubricants, and reinstalling components in reverse order of disassembly. Special care must be taken to align parts properly and not damage surfaces.
Caterpillar Cat 315D L Excavator (Prefix CJN) Service Repair Manual Instant D...kubei069369925
The document provides instructions for disassembling and assembling a travel motor. It lists 27 steps for disassembly that include removing the head, brake piston, barrel assembly, and other components. It then lists 26 steps for assembly, putting the components back together in reverse order and noting proper installation of seals, springs, and other parts. Precautions are provided to ensure correct alignment of parts and prevent damage during assembly.
Caterpillar Cat 315D L Excavator (Prefix CJN) Service Repair Manual (CJN00001...jdksmmdmdd
This document provides instructions for disassembling and assembling a travel motor. The disassembly process involves 27 steps to remove components from the travel motor in the correct order. This includes removing the head, brake piston, barrel assembly, shoe retainer, and shaft assembly. The assembly process reverses the disassembly with 27 steps and provides notices to ensure proper installation of seals, keys, and other components.
Caterpillar Cat 315D L Excavator (Prefix CJN) Service Repair Manual Instant D...shanruliu7360
The document provides instructions for disassembling and assembling a travel motor. It lists 27 steps for disassembly that include removing the head, brake piston, barrel assembly, and other components. It then lists 26 steps for assembly, putting the components back together in reverse order and noting proper installation of seals, springs, and other parts. Precautions are provided to ensure correct alignment of parts and prevent damage during assembly.
Caterpillar Cat 315D L Excavator (Prefix CJN) Service Repair Manual Instant D...rishang96299
The document provides instructions for disassembling and assembling a travel motor. It lists 27 steps for disassembly that include removing the head, brake piston, barrel assembly, and other components. It then lists 26 steps for assembly, putting the components back together in reverse order and noting proper installation of seals, springs, and other parts. Precautions are provided to ensure correct alignment of parts and prevent damage during assembly.
Caterpillar Cat 315D L Excavator (Prefix CJN) Service Repair Manual (CJN00001...fuusejkddmmd3e
The document provides instructions for disassembling and assembling a travel motor. It lists 27 steps for disassembly that include removing the head, brake piston, barrel assembly, and other components. It then lists 26 steps for assembly, putting the components back together in reverse order and noting proper installation of seals, springs, and other parts. Precautions are provided to ensure correct alignment of parts and prevent damage during assembly.
Caterpillar Cat 315D L Excavator (Prefix CJN) Service Repair Manual (CJN00001...dujkdksmdmdm
This document provides instructions for disassembling and assembling a travel motor. The disassembly process involves 27 steps to remove components from the travel motor in the correct order. This includes removing the head, brake piston, barrel assembly, shoe retainer, and shaft assembly. The assembly process reverses the disassembly with 27 steps and provides notices to ensure proper installation of seals, keys, and other components.
Caterpillar Cat 315D L Excavator (Prefix CJN) Service Repair Manual (CJN00001...fujkse9didkke3
The document provides instructions for disassembling and assembling a travel motor. It lists 27 steps for disassembly that include removing bolts, seals, plates, and other components. It then lists 26 steps for assembly, which involves cleaning components, applying seals and lubricants, and reinstalling components in reverse order of disassembly. Special care must be taken to align parts properly and not damage surfaces.
Caterpillar cat 315 d l excavator (prefix cjn) service repair manual (cjn0000...dkdmidkkdk
This document provides instructions for disassembling and assembling a travel motor. The disassembly process involves 27 steps to remove components from the travel motor body and head. Key steps include removing the head, brake piston, barrel assembly, shoe retainer and piston shoe assemblies. The assembly process reverses the disassembly with 27 corresponding steps, applying sealant and lubricant as needed and ensuring proper alignment of components.
Caterpillar Cat 315D L Excavator (Prefix CJN) Service Repair Manual (CJN00001...fjkdksmmdm
This document provides instructions for disassembling and assembling a travel motor. The disassembly process involves 27 steps to remove components from the travel motor in the correct order. This includes removing the head, brake piston, barrel assembly, shoe retainer, and shaft assembly. The assembly process reverses the disassembly with 27 steps and provides notices to ensure proper installation of seals, keys, and other components.
Similar to Caterpillar Cat 319D L and 319D LN Excavator (Prefix FMH) Service Repair Manual Instant Download.pdf (14)
1) The document provides disassembly and assembly instructions for the final drive of a 318C excavator.
2) It lists required tools and parts and gives step-by-step instructions to disassemble components like the cover, planetary assembly, ring gear, and carrier.
3) The assembly section instructs to clean all parts thoroughly and replace all seals before reinstalling components like the support ring, planetary gears, and retainer nut in the reverse order of disassembly.
Caterpillar Cat 318D2 and 318D2 L Excavator (Prefix SGB) Service Repair Manua...ze6074xunong
This document provides instructions for disassembling and assembling the final drive of a 318D2 excavator. It lists the required tools and outlines 33 steps to disassemble the final drive components such as the cover, carrier assembly, ring gears, and housing. It then describes 28 steps to reassemble the final drive, including preloading the bearings, installing seals and pins, and reassembling the carrier assembly components. Cleanliness is emphasized throughout to prevent dirt from entering internal mechanisms during disassembly and assembly.
Caterpillar Cat 318C, 318C L and 318C LN Excavator (Prefix MDY) Service Repai...ze6074xunong
This document provides instructions for disassembling and assembling the final drive of a 318C excavator. It lists the required tools and presents 33 steps to disassemble the final drive by removing components like the cover, carrier assembly, ring gears, and housing. It then lists 7 notes and 28 steps to reassemble the final drive by installing components like seals, bearings, shims, and housing pieces in the reverse order of disassembly. The goal is to carefully disassemble and reassemble the final drive while cleaning parts and applying sealant or anti-seize compound where needed.
Caterpillar Cat 318D L Excavator (Prefix ZKJ) Service Repair Manual Instant D...ze6074xunong
This document provides instructions for disassembling and assembling the final drive of a 318D L excavator. It lists the required tools and presents 33 steps for disassembly, including removing the final drive cover, carrier assembly, ring gears, and other components. It then lists 13 steps for assembly, including installing bearings in the main housing, preloading the bearings to determine the correct shim thickness, installing seals and gears, and reassembling disassembled components. The goal is to disassemble and clean all parts before precise reassembly in the reverse order of disassembly.
Caterpillar Cat 318D2 L Excavator (Prefix DPJ) Service Repair Manual Instant ...ze6074xunong
This document provides instructions to disassemble the final drive of a 318D2 L excavator. It lists the required tools and presents 33 steps to fully disassemble the final drive and its components. Key steps include removing the final drive assembly and mounting it to a repair stand, removing plugs and springs from the assembly while taking safety precautions for released spring forces, and using lifting devices to remove heavier internal components like the carrier assembly. The goal is to fully separate all individual parts for inspection or replacement.
Caterpillar Cat 318C, 318C L and 318C LN Excavator (Prefix GPA) Service Repai...ze6074xunong
This document provides instructions for disassembling and assembling the final drive of a 318C excavator. It lists the required tools and presents 33 steps for disassembly, including removing the final drive sprocket, carrier assembly, ring gears, and other components. It then lists notes on cleanliness and provides 14 steps for reassembling the final drive, including installing bearings, shims, and seals. The purpose is to provide maintenance technicians with a procedure for taking apart and rebuilding the excavator's final drive system.
This document provides instructions for removing and installing various engine components on a 299D XHP Compact Track Loader, including the diesel particulate filter, air inlet heater, inlet manifold, and inlet and exhaust valves. The procedures describe disconnecting wiring harnesses, removing mounting bolts, and installing replacement parts in the reverse order of removal, taking safety precautions for hot components. Tools required include goggles, gloves, a respirator, and specialty tools for compressing valve springs.
Caterpillar Cat 257D MULTI TERRAIN LOADER (Prefix EZW) Service Repair Manual ...ze6074xunong
The document provides instructions for removing and installing a piston pump on a 257D Multi Terrain Loader. It lists required tools and outlines a step-by-step process including disconnecting hoses and harnesses, using lifting tools to support the pump, and removing bolts. The reassembly process is described in reverse order, noting steps like applying thread lock compound and centering the swashplate.
Caterpillar Cat 140M 2 MOTOR GRADER (Prefix R9M) Service Repair Manual Instan...ze6074xunong
This document provides instructions for removing and installing the engine on a Caterpillar 140M 2 motor grader. Key steps include draining fluids, disconnecting tubes, hoses and wiring harnesses, and removing mounting bolts. Special tools may be required to remove some components. The engine should be attached to a lifting device and removed, then the installation process follows the removal steps in reverse order. Safety precautions are provided regarding contained fluids, pressurized systems, and ensuring parts are kept clean to prevent damage.
The document provides instructions for removing and installing an idler gear on a Caterpillar 299D2 XHP compact track loader. The removal procedure involves removing the front housing, ensuring the piston is at top center position, marking gear alignment, installing a flywheel stopper tool, and removing bolts, plates and the idler gear. The installation procedure specifies cleaning and applying oil to parts, ensuring correct bushing alignment, and tightening bolts to the specified torque.
Caterpillar Cat 257B3 MULTI TERRAIN LOADER (Prefix B7H) Service Repair Manual...ze6074xunong
This document provides disassembly and assembly instructions for a piston motor (hydrostatic) on a Caterpillar 257B3 Multi Terrain Loader. It lists 42 steps to disassemble the piston motor by removing various components like springs, seals, pins, gears, and bearings. It then lists 13 steps to assemble the piston motor by installing those same components in reverse order. The document includes illustrations and lists required tools for each step.
Caterpillar Cat 257 Multi Terrain Loader (Prefix CMM) Service Repair Manual I...ze6074xunong
This document provides instructions for removing and installing a flywheel housing on a 257 Multi Terrain Loader with a 3034 engine. It describes using link brackets and a lifting device to remove the flywheel housing by removing its bolts. For installation, it instructs cleaning the cylinder block face, placing the housing over dowels on the block, and reinstalling the bolts while using link brackets for support. Precautions are given to keep parts clean and not damage surfaces.
Caterpillar Cat 143H Motor Grader (Prefix APN) Service Repair Manual Instant ...ze6074xunong
The document provides instructions for disassembling and assembling the final drive of a 143H motor grader. It describes removing the final drive unit and then disassembling it by removing gears, shafts, bearings and seals. The assembly section describes installing these components in reverse order and adjusting shims to set proper end play. Precautions are given to clean parts thoroughly and use new parts if worn.
Caterpillar Cat 140M 3 AWD MOTOR GRADER (Prefix N9J) Service Repair Manual In...ze6074xunong
This document provides instructions for disassembling and assembling the piston pump of a Caterpillar 140M 3 AWD motor grader. The disassembly procedure involves removing 18 components of the pump including valves, seals, springs, spools, pistons, and plates. The assembly procedure outlines installing these components in reverse order and notes to keep parts clean and check seals for wear.
Caterpillar Cat 140M Motor Grader (Prefix B9M) Service Repair Manual Instant ...ze6074xunong
This document provides instructions for removing the drawbar from a 140M Motor Grader. It lists the required tools, gives safety warnings about hydraulic pressure, and outlines a 26-step procedure involving lowering the blade, removing bolts and pins, and using lifting equipment to remove the drawbar. Proper identification and plugging of hoses is noted to prevent fluid loss and contamination during the process.
The document provides instructions for removing and installing various engine components on a 299D XHP Compact Track Loader, including the water pump, water temperature regulator, flywheel, and crankshaft rear seal. The procedures describe draining coolant, removing guards and belts, and installing replacement parts in the reverse order of removal while taking safety precautions. Tools required include Three Bond 1217H adhesive and guide bolts for installing the flywheel.
Caterpillar Cat 140M 2 MOTOR GRADER (Prefix M9D) Service Repair Manual Instan...ze6074xunong
This document provides assembly instructions for a transmission in a 140M 2 motor grader. It lists required tools and parts and provides 44 steps and illustrations to assemble the transmission components which include installing bearings, gears, seals, pistons, clutches, and housing components. Proper cleaning, heating/cooling of parts, and torque specifications are noted throughout the assembly process.
Caterpillar Cat 315B L Excavator (Prefix 5SW) Service Repair Manual Instant D...ze6074xunong
This document provides instructions for disassembling and assembling the travel motor of a 315B L excavator. The disassembly process involves removing 23 separate components from the travel motor in a specific sequence. The assembly process reverses the disassembly steps and provides additional details to ensure proper reinstallation of components, such as applying sealant and lubricant, and using strings to hold parts in place temporarily.
The document provides instructions for removing and installing various engine components on a Caterpillar C3.8 engine, including:
- Installing the flywheel, ensuring the ring gear is oriented correctly
- Removing and installing the crankshaft rear seal and carrier
- Removing and installing the flywheel housing
- Removing and installing the crankshaft pulley
The procedures include lists of required tools and step-by-step instructions with accompanying illustrations. Safety and installation notes are provided throughout.
This document provides instructions for disassembling and assembling the travel motor on a 315C Excavator. The disassembly process involves removing 27 individual parts in 28 steps, including removing bolts, seals, bearings, pistons, and other internal components. The assembly process reverses the disassembly steps and includes applying lubricant to parts and ensuring proper installation of springs, seals, and other components. Cleanliness is emphasized throughout to prevent contamination.
car rentals in nassau bahamas | atv rental nassau bahamasjustinwilson0857
At Dash Auto Sales & Car Rentals, we take pride in providing top-notch automotive services to residents and visitors alike in Nassau, Bahamas. Whether you're looking to purchase a vehicle, rent a car for your vacation, or embark on an exciting ATV adventure, we have you covered with our wide range of options and exceptional customer service.
Website: www.dashrentacarbah.com
Kalyan chart DP boss guessing matka results➑➌➋➑➒➎➑➑➊➍
8328958814Satta Matka is a number-based game. There are several markets, each with its owner responsible for releasing the lottery satta Matka market results on time. Kalyan market, Worli market, main Mumbai market, Rajdhani market, and Milan market are some of the main markets or bazaars involved in the satta Matka game. The oldest and most legitimate markets are in Kalyan and Main Mumbai. Every Satta Market has an open and close time. The satta results for these markets are published on or shortly after the open and close times. During the open result, two numbers are decoded, one of which is a three-digit number and the other a single-digit number. Similarly, three-digit and single-digit numbers are declared during the satta market's close. The last digit after adding the three digits of the open or close result is usually the single digit declared during the open and close results.KALYAN MATKA | MATKA RESULT | KALYAN MATKA TIPS | SATTA MATKA | MATKA.COM | MATKA PANA JODI TODAY | BATTA SATKA | MATKA PATTI JODI NUMBER | MATKA RESULTS | MATKA CHART | MATKA JODI | SATTA COM | FULL RATE GAME | MATKA GAME | MATKA WAPKA | ALL MATKA RESULT LIVE ONLINE | MATKA RESULT | KALYAN MATKA RESULT | DPBOSS MATKA 143 | MAINSATTA MATKA SATTA FAST RESULT KALYAN TOP MATKA RESULT KALYAN SATTA MATKA FAST RESULT MILAN RATAN RAJDHANI MAIN BAZAR MATKA FAST TIPS RESULT MATKA CHART JODI CHART PANEL CHART FREE FIX GAME SATTAMATKA ! MATKA MOBI SATTA 143 spboss.in TOP NO1 RESULT FULL RATE MATKA ONLINE GAME PLAY BY APP SPBOSSdp boss net, dp satta, dpboss dpboss, indian satta matka, kalyan matkà result today , matka boss, matka result live, matka satta result today, satamatka com, satta boss, satta matka king, sattamatkà, sattamatkà result, sattamatta com, sattmatka sattmatka, star matka, tara matka, tara satta matka, worli matka, indian matka, matka live, kalyan guessing, satta fix, kalyan final ank, dp matka, dpboss net, sata mata com, सट्टा मटका, sattamatkà 143, golden matka, satta matta matka 143, satta fast, kalyan open, satta 143, dpboss 143 guessing, dpboss satta, golden satta matka, satta bajar
Satta Matka Market is India's leading website providing the quickest sattamatka outcome, experienced in Satta Matka game. Our services include free Satta Matka Trick and Tips for Kalyan Matka and Disawar Satta King, as well as satta matka graphs, online play, tips and more. Our team of experts strive to help you recoup your losses quickly through our proposals such as Free Satta Matka Tips and Kalyan Bazar Tips. We are known as India's best Matka DpBoss portal site, here to deliver updates on all sorts of Satta Market like Kalyan Bazar, Milan, Rajdhani, Time Bazaar, Main and the most current charts. Stay tuned with us for more live updates on the Satta market
Automotive Engine Valve Manufacturing Plant Project Report.pptxSmith Anderson
The report provides a complete roadmap for setting up an Automotive Engine Valve. It covers a comprehensive market overview to micro-level information such as unit operations involved, raw material requirements, utility requirements, infrastructure requirements, machinery and technology requirements, manpower requirements, packaging requirements, transportation requirements, etc.
2. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 319D LN EXCAVATOR FMH
Configuration: 319D L & 319D LN Excavators FMH00001-UP (MACHINE) POWERED BY C4.2 Engine
Disassembly and Assembly
315D, 318D and 319D Excavators Machine Systems
Media Number -KENR5272-13 Publication Date -01/09/2017 Date Updated -06/09/2017
i01219550
Travel Motor - Disassemble
SMCS - 4351-015
Disassembly Procedure
Start By:
a. Remove the travel motor.
Reference: Refer to Disassembly and Assembly, "Travel Motor - Remove" in this manual.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Caterpillar Dealer Service
Tool Catalog" for tools and supplies suitable to collect and contain
fluids on Caterpillar products.
Dispose of all fluids according to local regulations and mandates.
1. Thoroughly clean the outside of the travel motor prior to disassembly.
2. Fasten the travel motor to a suitable holding fixture in a vertical position. The weight of the
travel motor is 60 kg (132 lb).
1/8
319D L & 319D LN Excavators FMH00001-UP (MACHINE) POWERED BY C4.2 E...
2020/11/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. 3. Put an alignment mark across the head and the body of the travel motor for assembly
purposes. The head must be reinstalled in the head's original position on the body of the
travel motor.
Illustration 1 g00510326
Note: During the removal of head (2) from the body of the travel motor, be careful not to
scratch or damage the mating surfaces of the components.
4. Remove socket head bolts (1).
5. Remove head (2) from the body of the travel motor.
Illustration 2 g00510341
2/8
319D L & 319D LN Excavators FMH00001-UP (MACHINE) POWERED BY C4.2 E...
2020/11/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. Illustration 3 g00510349
6. Turn over head (2).
7. Remove O-ring seal (6), shims (5), port plate (4), and bearing (3) from the head.
8. Remove the two check valve assemblies from the head.
Note: There is a retainer under spring (9). This retainer is a press fit in head (2). Do not
remove the retainer.
9. Insert a dowel rod with a small diameter into hole (X). Tap the dowel rod with a plastic
hammer in order to remove spring (9), poppet (8) and seat (7) from the head.
Illustration 4 g00510351
10. Remove three fittings (10) and plugs (11) from the head. Remove the O-ring seal from each
fitting.
Illustration 5 g00510352
11. Remove three O-ring seals (12) and washer set (13) from the body of the travel motor.
12. Place a shop towel over brake piston (14). Retain brake piston (14) by hand, and apply
approximately 525 kPa (75 psi) of shop air pressure to brake release port (Y). Make sure
that the shop air pressure is free of water. Brake piston (14) will move up the piston guide,
and out of the piston guide. Remove brake piston (14) from the body of the travel motor.
3/8
319D L & 319D LN Excavators FMH00001-UP (MACHINE) POWERED BY C4.2 E...
2020/11/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. Illustration 6 g00510353
13. Remove O-ring seal (15) from the brake piston. Remove backup ring (16) from the brake
piston.
14. Remove O-ring seal (17) from the brake piston. Remove backup ring (18) from the brake
piston.
Illustration 7 g00510356
15. Remove piston guide (19), five friction plates (20) and the four steel plates from the body of
the travel motor.
Illustration 8 g00510359
4/8
319D L & 319D LN Excavators FMH00001-UP (MACHINE) POWERED BY C4.2 E...
2020/11/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. 16. Remove O-ring seal (21) from the piston guide. Remove backup ring (22) from the piston
guide.
Illustration 9 g00510365
Note: Do not allow the components of barrel assembly (23) to come apart during the
removal from the travel motor. All of the components in the barrel assembly must be
reinstalled in the component's original location.
17. Use two large screwdrivers, as shown. Slowly remove barrel assembly (23) from the body
of the travel motor. Do not allow the components to fall apart.
Illustration 10 g00510502
Note: Shoe retainer (24) and piston shoe assemblies (25) are not serviced separately. Prior
to the removal of the shoe retainer and the piston shoe assemblies from barrel (26), put
identification marks on piston shoe assemblies (25) for assembly purposes. Identification
marks are used to identify the piston shoe assembly's location in shoe retainer (24) and
barrel (26). The piston shoe assemblies must be reinstalled in the piston shoe assembly's
original bores in the shoe retainer and the barrel.
18. Remove shoe retainer (24) and piston shoe assemblies (25) from barrel (26). Separate the
piston shoe assemblies from the shoe retainer.
5/8
319D L & 319D LN Excavators FMH00001-UP (MACHINE) POWERED BY C4.2 E...
2020/11/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. Illustration 11 g00510504
19. Remove guide (27), spacer (28) and springs (29) from the barrel.
Illustration 12 g00510547
20. Remove cam plate (30) from the body of the travel motor.
Illustration 13 g00510550
21. Remove two keys (31) and the two locating pins (not shown) from the body of the travel
motor.
6/8
319D L & 319D LN Excavators FMH00001-UP (MACHINE) POWERED BY C4.2 E...
2020/11/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. Illustration 14 g00510551
22. Remove O-ring seal (33) from the body of the travel motor.
23. Use a soft faced hammer to remove shaft assembly (34) from the body of the travel motor.
Remove the shaft assembly in the direction that is indicated by the arrow. Refer to
Illustration 14.
Illustration 15 g00510595
24. Remove retaining rings (35) from each side of bearing (36). Push shaft (34) out of bearing
(36) with a press.
Illustration 16 g00510598
7/8
319D L & 319D LN Excavators FMH00001-UP (MACHINE) POWERED BY C4.2 E...
2020/11/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. 25. Remove inner race (37) from shaft (34).
Illustration 17 g00510599
26. Remove lip seal (38) from the body of the travel motor.
Illustration 18 g00510605
27. Remove two stoppers (39) and the two pistons from the body of the travel motor.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sun Nov 1 23:21:36 UTC+0800 2020
8/8
319D L & 319D LN Excavators FMH00001-UP (MACHINE) POWERED BY C4.2 E...
2020/11/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 319D LN EXCAVATOR FMH
Configuration: 319D L & 319D LN Excavators FMH00001-UP (MACHINE) POWERED BY C4.2 Engine
Disassembly and Assembly
315D, 318D and 319D Excavators Machine Systems
Media Number -KENR5272-13 Publication Date -01/09/2017 Date Updated -06/09/2017
i01706705
Travel Motor - Assemble
SMCS - 4351-016
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-0510 Driver Gp 1
1. Make sure that all of the components of the travel motor are thoroughly clean and free of
dirt and debris prior to assembly.
Illustration 1 g00510595
2. Install retaining ring (35) in the groove on shaft (34).
3. Install bearing (36) on shaft (34) with a press. Install the bearing until the bearing contacts
the retaining ring.
1/10
319D L & 319D LN Excavators FMH00001-UP (MACHINE) POWERED BY C4.2 E...
2020/11/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. 4. Install the other retaining ring on the opposite side of bearing (36).
Illustration 2 g00510598
5. Install inner race (37) on the end of shaft (34) until the inner race is seated against the
shoulder on the shaft.
Illustration 3 g00651891
(a) Body
6. Apply a thin coat of 5P-3413 Pipe Sealant on Surfaces (Y) of the body of the travel motor.
7. Use Tooling (A) in order to install lip seal (38).
8. Install lip type seal (38) in the body of the travel motor. Install the lip seal so that the sealing
lip is facing in the direction that is shown. Make sure that the lip seal contacts the
counterbore in the body of the travel motor.
Note: Slowly rotate shaft assembly (34) during the installation in order to make sure that the
shaft assembly does not bind in the body of the travel motor.
9. Apply clean hydraulic oil on the lip of lip seal (38).
2/10
319D L & 319D LN Excavators FMH00001-UP (MACHINE) POWERED BY C4.2 E...
2020/11/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. 10. Use a press to install shaft assembly (34) in the body of the travel motor. Slowly rotate the
shaft during the installation in order to make sure that the shaft does not bind. Make sure
that the bearing on the shaft contacts the counterbore in the body of the travel motor.
Illustration 4 g00651960
NOTICE
The locating pin on each key is not centered. In order to prevent
damage to the barrel assembly during assembly of the travel motor, the
keys must be installed as shown. Also, the keys must be installed in the
key's original location in the body of the travel motor.
11. Install the two locating pins and two keys (31) in the body of the travel motor, as shown.
Illustration 5 g00510547
3/10
319D L & 319D LN Excavators FMH00001-UP (MACHINE) POWERED BY C4.2 E...
2020/11/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. 12. Install cam plate (30) in the body of the travel motor in the cam plate's original location.
Make sure that the two pistons and two keys (31) in the body of the travel motor engage
properly with the cam plate.
Illustration 6 g00510504
13. Install nine springs (29) in the barrel. Install spacer (28) and guide (27) on the barrel.
Illustration 7 g00878253
14. Install piston shoe assemblies (25) in the piston shoe assembly's original bores in shoe
retainer (24).
15. Apply clean hydraulic oil in the bores of the barrel and on piston shoe assemblies (25).
Install the piston shoe assemblies with the shoe retainer in the piston shoe assembly's
original bore in barrel (26).
NOTICE
Make sure that the cam plate is correctly engaged with the two pistons
in the body of the travel motor prior to installing the barrel assembly.
When the body of the travel motor is tilted to allow the installation of
the barrel assembly, the cam plate can slide off of the two pistons. The
remaining parts of the travel motor can be assembled with the cam
plate in the incorrect position.
4/10
319D L & 319D LN Excavators FMH00001-UP (MACHINE) POWERED BY C4.2 E...
2020/11/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. Extensive damage will result from the incorrect installation of the cam
plate. Follow the exact installation procedure to prevent damage.
16. Apply clean hydraulic oil on the sliding surfaces of the cam plate, on the piston shoe
assemblies and on the splined shaft of the travel motor.
Illustration 8 g00485953
17. Route a piece of strong string through an opening for the cam plate tension adjusters. Route
the string over the sliding surface of cam plate (30) and through the opposite opening for the
cam plate tension adjusters. Hold the string taut in order to keep cam plate (30) correctly
engaged with keys (31). Keep the string taut and position the body of the travel motor on the
body's side. Do not release the tension on the string at this time. Install barrel assembly (23)
as a unit on the shaft. Pull the string out of the body of the travel motor. It may be necessary
to pull the barrel assembly and the piston shoe assemblies away from the cam plate slightly
in order to release the string.
Illustration 9 g00651967
5/10
319D L & 319D LN Excavators FMH00001-UP (MACHINE) POWERED BY C4.2 E...
2020/11/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. 18. Install O-ring seal (21) and backup ring (22) on piston guide (19), as shown.
Illustration 10 g00510356
19. Place the body of the travel motor in a vertical position.
20. Apply clean hydraulic oil on five friction plates (20) and the four steel plates. Install the
plates in alternating order in the body of the travel motor. Start with a friction plate and end
with a friction plate.
21. Install piston guide (19) in the body of the travel motor until the piston guide contacts the
counterbore in the body of the travel motor.
Illustration 11 g00878297
Note: Make sure that brake piston (14) is thoroughly clean and free of dirt and debris.
22. Install O-ring seal (16). Install backup ring (15).
23. Install O-ring seal (17). Install backup ring (18).
6/10
319D L & 319D LN Excavators FMH00001-UP (MACHINE) POWERED BY C4.2 E...
2020/11/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. 24. Apply a thin coat of hydraulic oil on the surfaces of piston (14) which contact the body of
the travel motor. Install piston (14) in the body of the travel motor by hand. It may be
necessary to use a soft faced hammer to seat the piston correctly.
Illustration 12 g00878299
Illustration 13 g00878239
25. Install washer set (12) in piston (14), as shown.
26. Install O-ring seals (13) in the body of the travel motor, as shown.
7/10
319D L & 319D LN Excavators FMH00001-UP (MACHINE) POWERED BY C4.2 E...
2020/11/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. Illustration 14 g00510605
27. Install the two pistons and two stoppers (39) in the housing of the travel motor. Tighten the
stoppers to a torque of 140 ± 14 N·m (105 ± 10 lb ft).
Illustration 15 g00510351
28. Install the O-ring seals on fittings (10). Apply 5P-3413 Pipe Sealant on the threads of
fittings (10). Install the fittings in the head, as shown.
29. Install plugs (11) in the head. Tighten each plug to a torque of 15 ± 2 N·m (11 ± 1 lb ft).
Illustration 16 g00510349
8/10
319D L & 319D LN Excavators FMH00001-UP (MACHINE) POWERED BY C4.2 E...
2020/11/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. Illustration 17 g00510341
30. Apply a thin coat of 9S-3263 Thread Lock Compound on the threads of the two check
valves. Install the check valves in the head.
31. Install seat (7), poppet (8) and spring (9) in the head at Location (X).
32. Install O-ring seal (6) in the head, as shown.
33. Install bearing (3) in the head until the bearing contacts the counterbore in the cover.
34. Apply 1U-6396 O-Ring Assembly Compound on port plate (4). Install the port plate in the
port plate's original position on the motor cover.
35. Use a shim or shims (5) so that the following requirements are met.
Note: During the following checks, turn the travel motor output shaft in a clockwise
direction.
a. The travel motor output shaft does not rotate with an applied torque of 440 N·m
(325 lb ft) or more with the parking brake release port open.
b. The travel motor output shaft rotates with an applied torque of 29 N·m (21 lb ft) or
less when the parking brake release port is pressurized to 780 kPa (115 psi) with both
the inlet port and the outlet port open to the hydraulic oil tank.
Note: It may be necessary to remove head (2) several times in order to determine the correct
thickness of shim or shims (5) that are used to adjust the rolling torque of the travel motor
output shaft.
36. Apply a thin layer of 5P-0960 Molybdenum Grease on shim or shims (5). Install the shim or
shims on the head. The grease will hold the shim or shims in place during the installation of
the head. Install the head on the body of the travel motor.
9/10
319D L & 319D LN Excavators FMH00001-UP (MACHINE) POWERED BY C4.2 E...
2020/11/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
19. Illustration 18 g00510326
37. Place head (2) in the head's original position on the travel motor. Install socket head bolts
(1) that secure the head. Tighten the socket head bolts to a torque of 175 ± 18 N·m
(130 ± 13 lb ft).
NOTICE
To prevent possible damage to the travel motor, fill the unit with oil at
least to the fill port before operating the machine. Refer to the
Operation and Maintenance Manual for the correct oil specification.
End By:
a. Install the travel motor. Refer to Disassembly and Assembly, "Travel Motor - Install" in this
manual.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sun Nov 1 23:22:36 UTC+0800 2020
10/10
319D L & 319D LN Excavators FMH00001-UP (MACHINE) POWERED BY C4.2...
2020/11/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
20. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 319D LN EXCAVATOR FMH
Configuration: 319D L & 319D LN Excavators FMH00001-UP (MACHINE) POWERED BY C4.2 Engine
Disassembly and Assembly
315D, 318D and 319D Excavators Machine Systems
Media Number -KENR5272-13 Publication Date -01/09/2017 Date Updated -06/09/2017
i03524320
Travel Motor - Install
SMCS - 4351-012
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 9U-7692 Threaded Rod M16 by 381mm 2
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Caterpillar Dealer Service
Tool Catalog" for tools and supplies suitable to collect and contain
fluids on Caterpillar products.
Dispose of all fluids according to local regulations and mandates.
1. Thoroughly clean the mating surfaces of the travel motor and the final drive.
1/3
319D L & 319D LN Excavators FMH00001-UP (MACHINE) POWERED BY C4.2 E...
2020/11/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
21. Illustration 1 g00651795
2. Install a new O-ring seal (5) . Apply clean hydraulic oil on O-ring seal (5) .
Illustration 2 g00707267
3. Attach a suitable lifting device to travel motor (4) , as shown. The weight of travel motor (4)
is approximately 57 kg (125 lb).
Illustration 3 g00944825
2/3
319D L & 319D LN Excavators FMH00001-UP (MACHINE) POWERED BY C4.2 E...
2020/11/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
22. 4. Carefully install travel motor (4) on Tooling (A) . Slide travel motor (4) into the final drive.
5. Install bolt (2A) that secures travel motor (4) to the final drive.
6. Remove Tooling (A) .
Illustration 4 g00707275
Typical example
7. Install bolts (2) .
8. Connect hose assemblies (3) and (1) .
9. Fill the final drive with oil. Refer to Operation and Maintenance Manual, "Lubricant
Viscosities" for the proper oil viscosity. Refer to Operation and Maintenance Manual, "Final
Drive Oil Level - Check" for the correct filling procedure.
10. Install high efficiency filters in place of the pilot filter, the case drain filter, and the return
filter.
Note: High efficiency filters should not be run for more than 250 hours before you change
back to the standard filters.
11. Obtain a hydraulic oil sample from the main S·O·S port. Refer to Operation and
Maintenance Manual, "Sampling Interval and Location of Sampling Valve" for the correct
location.
12. If the S·O·S sample exceeds ISO 18/15, flush the hydraulic system. Refer to Contamination
Control Guideline, SEBF8447 for further information.
End By: Install the counterbalance valve. Refer to Disassembly and Assembly, "Counterbalance
Valve (Travel) - Install".
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sun Nov 1 23:23:35 UTC+0800 2020
3/3
319D L & 319D LN Excavators FMH00001-UP (MACHINE) POWERED BY C4.2 E...
2020/11/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
23. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 319D LN EXCAVATOR FMH
Configuration: 319D L & 319D LN Excavators FMH00001-UP (MACHINE) POWERED BY C4.2 Engine
Disassembly and Assembly
315D, 318D and 319D Excavators Machine Systems
Media Number -KENR5272-13 Publication Date -01/09/2017 Date Updated -06/09/2017
i05453056
Final Drive - Remove
SMCS - 4050-011
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
8S-7611 Handle As 2
8S-7615 Pin As 2
283-1495 Stand Assembly 2
B 439-3939 Link Bracket As 2
C
154-6184 Forcing Bolt (M 20) 2
154-6185(1)
Forcing Bolt (M 24) 2
(1)
For Use on 329 and 330 sales models
Start By:
a. Separate the track assembly.
b. Remove the travel motor.
1/3
319D L & 319D LN Excavators FMH00001-UP (MACHINE) POWERED BY C4.2 E...
2020/11/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
24. Suggest:
If the above button click is invalid.
Please download this document
first, and then click the above link
to download the complete manual.
Thank you so much for reading
25. Illustration 1 g00489826
Typical Example
Note: Adjust the height of Tooling (A) so that there is sufficient clearance between the
sprocket and the track for the removal of the final drive.
1. Lift the side of the machine in order to install Tooling (A) under the frame, as shown.
Illustration 2 g00712767
2. Fasten Tooling (B) and a suitable lifting device to final drive (1), as shown. Put a slight
lifting tension on the final drive.
Illustration 3 g00712737
2/3
319D L & 319D LN Excavators FMH00001-UP (MACHINE) POWERED BY C4.2 E...
2020/11/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...