This document provides disassembly instructions for the final drive and travel motor of a 315F LCR excavator. It outlines 14 steps to disassemble the final drive which includes removing covers, gears, bearings, and other components. It also details 16 steps to disassemble the travel motor, removing items like piston assemblies, seals, and plates. Safety notices are included regarding handling pressurized fluids and springs. The document is intended to guide technicians in properly disassembling these systems for maintenance or repair.
The document provides disassembly instructions for the final drive, travel motor, and other components of an excavator model 313D2. It lists over 30 detailed steps to disassemble the various systems, including removing covers, plates, gears, seals, valves, pistons, and other parts. Safety warnings are provided throughout to warn of potential injuries from springs or pressurized fluids. The extensive list of parts and procedures indicates a complex disassembly and reassembly process for servicing these components.
The document provides disassembly instructions for the final drive, travel motor, and other components of an excavator model 313D2. It lists over 30 detailed steps to disassemble the various parts, including removing covers, plates, gears, seals, valves, pistons, and other components. Safety warnings are provided throughout to warn of potential injuries from springs or pressurized fluids. Dismantling the components involves draining fluids, using various tools like pullers and wrenches, and carefully tracking part locations for reassembly.
Caterpillar Cat 313D2 L Excavator (Prefix LCY) Service Repair Manual Instant ...shanruliu7360
The document provides disassembly instructions for the final drive, travel motor, and other components of an excavator model 313D2. It lists over 30 detailed steps to disassemble the various systems, including removing covers, plates, gears, seals, valves, and other parts. Safety warnings are provided throughout to warn of hazards such as heavy lifting, pressurized fluids, and released spring forces. Dismantling the components involves draining fluids, using various tools, and carefully tracking part locations for reassembly.
Caterpillar Cat 313D2 L Excavator (Prefix LCY) Service Repair Manual Instant ...rishang96299
The document provides disassembly instructions for the final drive, travel motor, and other components of an excavator model 313D2. It lists over 30 detailed steps to disassemble the various systems, including removing covers, plates, gears, seals, valves, and other parts. Safety warnings are provided throughout to warn of potential injuries from springs, fluids, and heavy components. The disassembly process is described in order from exterior components inwards to the individual gears, seals, and other internal parts.
The document provides disassembly instructions for the final drive, travel motor, and other components of an excavator model 313D2. It lists over 30 detailed steps to disassemble the various systems, including removing covers, plates, gears, seals, valves, and other parts. Safety warnings are provided throughout to warn of hazards such as heavy lifting, pressurized fluids, and released spring forces. Dismantling the components involves draining fluids, using various tools, and carefully tracking part locations for reassembly.
Caterpillar Cat 313D2 L Excavator (Prefix LCY) Service Repair Manual Instant ...kubei069369925
The document provides disassembly instructions for the final drive, travel motor, and other components of an excavator model 313D2. It lists over 30 detailed steps to disassemble the various systems, including removing covers, plates, gears, seals, valves, pistons, and other parts. Safety warnings are provided throughout to warn of potential injuries from springs, fluids, and heavy components. Diagrams accompany most steps to illustrate the disassembly process.
The document provides disassembly instructions for the final drive, travel motor, and various other components of an excavator model 313D2. It lists over 30 detailed steps to disassemble parts like the final drive, counterbalance valve, travel motor, barrel assembly, and more. Safety warnings are provided throughout to warn of hazards like parts propelled by springs and releasing hydraulic pressure. Required tools are listed at the beginning, including link brackets, a transmission repair stand, bolts, pullers, and other specialized tools.
1) The document provides disassembly instructions for the final drive, travel motor, counterbalance valve, and other components of an excavator model 313D2.
2) It describes removing components like sprockets, fittings, valves, seals, springs, pistons, and plates, taking care with heavy or pressurized parts.
3) Detailed steps include draining fluids, using specialty tools, marking positions for reassembly, and noting the order of alternating parts.
The document provides disassembly instructions for the final drive, travel motor, and other components of an excavator model 313D2. It lists over 30 detailed steps to disassemble the various systems, including removing covers, plates, gears, seals, valves, pistons, and other parts. Safety warnings are provided throughout to warn of potential injuries from springs or pressurized fluids. The extensive list of parts and procedures indicates a complex disassembly and reassembly process for servicing these components.
The document provides disassembly instructions for the final drive, travel motor, and other components of an excavator model 313D2. It lists over 30 detailed steps to disassemble the various parts, including removing covers, plates, gears, seals, valves, pistons, and other components. Safety warnings are provided throughout to warn of potential injuries from springs or pressurized fluids. Dismantling the components involves draining fluids, using various tools like pullers and wrenches, and carefully tracking part locations for reassembly.
Caterpillar Cat 313D2 L Excavator (Prefix LCY) Service Repair Manual Instant ...shanruliu7360
The document provides disassembly instructions for the final drive, travel motor, and other components of an excavator model 313D2. It lists over 30 detailed steps to disassemble the various systems, including removing covers, plates, gears, seals, valves, and other parts. Safety warnings are provided throughout to warn of hazards such as heavy lifting, pressurized fluids, and released spring forces. Dismantling the components involves draining fluids, using various tools, and carefully tracking part locations for reassembly.
Caterpillar Cat 313D2 L Excavator (Prefix LCY) Service Repair Manual Instant ...rishang96299
The document provides disassembly instructions for the final drive, travel motor, and other components of an excavator model 313D2. It lists over 30 detailed steps to disassemble the various systems, including removing covers, plates, gears, seals, valves, and other parts. Safety warnings are provided throughout to warn of potential injuries from springs, fluids, and heavy components. The disassembly process is described in order from exterior components inwards to the individual gears, seals, and other internal parts.
The document provides disassembly instructions for the final drive, travel motor, and other components of an excavator model 313D2. It lists over 30 detailed steps to disassemble the various systems, including removing covers, plates, gears, seals, valves, and other parts. Safety warnings are provided throughout to warn of hazards such as heavy lifting, pressurized fluids, and released spring forces. Dismantling the components involves draining fluids, using various tools, and carefully tracking part locations for reassembly.
Caterpillar Cat 313D2 L Excavator (Prefix LCY) Service Repair Manual Instant ...kubei069369925
The document provides disassembly instructions for the final drive, travel motor, and other components of an excavator model 313D2. It lists over 30 detailed steps to disassemble the various systems, including removing covers, plates, gears, seals, valves, pistons, and other parts. Safety warnings are provided throughout to warn of potential injuries from springs, fluids, and heavy components. Diagrams accompany most steps to illustrate the disassembly process.
The document provides disassembly instructions for the final drive, travel motor, and various other components of an excavator model 313D2. It lists over 30 detailed steps to disassemble parts like the final drive, counterbalance valve, travel motor, barrel assembly, and more. Safety warnings are provided throughout to warn of hazards like parts propelled by springs and releasing hydraulic pressure. Required tools are listed at the beginning, including link brackets, a transmission repair stand, bolts, pullers, and other specialized tools.
1) The document provides disassembly instructions for the final drive, travel motor, counterbalance valve, and other components of an excavator model 313D2.
2) It describes removing components like sprockets, fittings, valves, seals, springs, pistons, and plates, taking care with heavy or pressurized parts.
3) Detailed steps include draining fluids, using specialty tools, marking positions for reassembly, and noting the order of alternating parts.
Caterpillar Cat 313D2 L Excavator (Prefix LCY) Service Repair Manual (LCY0000...djdksmmdmd
1) The document provides disassembly instructions for the final drive, travel motor, counterbalance valve, and other components of an excavator model 313D2.
2) It describes removing components like sprockets, fittings, valves, pistons, springs and seals, taking care with heavy or pressurized parts.
3) Detailed steps include draining fluids, using specialty tools, marking part locations for reassembly, and noting the order of alternating plates.
1) The document provides disassembly instructions for the final drive, travel motor, counterbalance valve, and other components of a 313D2 excavator.
2) It describes removing components like sprockets, fittings, plates, and pistons using various tools.
3) Safety precautions are provided, such as draining fluids properly and taking care when removing parts with stored spring energy.
The document provides disassembly instructions for the final drive, travel motor, and other components of an excavator model 313D2. It lists over 30 detailed steps to disassemble the various systems, including removing covers, plates, gears, seals, valves, pistons, and other parts. Safety warnings are provided throughout to warn of potential injuries from springs, fluids, and heavy components. The disassembly process is described in order from exterior cleaning to removal of individual internal parts.
Caterpillar Cat 313D2 L Excavator (Prefix LCY) Service Repair Manual (LCY0000...shun96145luo
The document provides disassembly instructions for the final drive, travel motor, and other components of an excavator model 313D2. It lists over 30 detailed steps to disassemble the various systems, including removing covers, plates, gears, seals, valves, pistons, and other parts. Safety warnings are provided throughout to warn of potential injuries from springs, fluids, and heavy components. Required tools are listed at the beginning to properly complete the disassembly.
The document provides disassembly instructions for the final drive, travel motor, and other components of an excavator model 313D2. It lists over 30 detailed steps to disassemble the various systems, including removing covers, plates, gears, seals, valves, pistons, and other parts. Safety warnings are provided throughout to warn of potential injuries from springs or pressurized fluids. The extensive list of parts and procedures indicates a complex disassembly process for inspection and repair of the excavator transmission and hydraulic systems.
Caterpillar Cat 313D2 L Excavator (Prefix LCY) Service Repair Manual (LCY0000...f7useijdkdmd1
The document provides disassembly instructions for the final drive, travel motor, and other components of a 313D2 excavator. It lists over 30 detailed steps to disassemble the final drive, travel motor, counterbalance valve, and other systems. The instructions include removing components like sprockets, valves, pistons, gears, plates, and seals. Safety notices are provided throughout to warn of potential injuries from parts under spring pressure or hydraulic oil. Required tools are listed at the beginning.
This document provides instructions for disassembling the final drive, travel motor, counterbalance valve, and other components of a 313D2 excavator. It lists required tools and outlines 16 steps to disassemble the final drive, 10 steps to disassemble the counterbalance valve, 7 steps to disassemble the travel motor, and 10 steps to further disassemble the barrel assembly and piston assemblies. Safety notices are included throughout to warn of potential hazards like released spring forces.
Caterpillar cat 313 d2 l excavator (prefix lcy) service repair manual (lcy000...jdfjskekmdme
The document provides disassembly instructions for the final drive, travel motor, and various other components of an excavator model 313D2. It lists over 30 detailed steps to disassemble components like the final drive, travel motor, counterbalance valve, and traction control valve. Safety warnings are provided throughout to warn of hazards like parts propelled by springs, hydraulic pressure, and heavy component weights. Required tools are listed at the beginning.
The document provides disassembly instructions for the final drive, travel motor, and other components of an excavator model 313D2. It lists over 30 detailed steps to disassemble the various systems, including removing covers, plates, gears, seals, valves, and other parts. Safety warnings are provided throughout to warn of hazards such as heavy lifting, pressurized fluids, and released spring forces. Dismantling the components involves draining fluids, using various tools, and carefully tracking part locations for reassembly.
Caterpillar Cat 313D2 L Excavator (Prefix LCY) Service Repair Manual (LCY0000...fjdkksmemd
The document provides disassembly instructions for the final drive, travel motor, and other components of an excavator model 313D2. It lists over 30 detailed steps to disassemble the various systems, including removing covers, plates, gears, seals, valves, pistons, and other parts. Safety warnings are provided throughout to warn of potential injuries from springs, fluids, and heavy components. Diagrams accompany most steps to illustrate the disassembly process.
1) The document provides disassembly instructions for the final drive, travel motor, counterbalance valve, and other components of an excavator model 313D2.
2) It describes removing components like sprockets, fittings, valves, plates, seals, pistons, springs, and more using various tools.
3) Safety precautions are provided, such as draining fluids properly, wearing protective equipment when removing pressurized parts, and noting part orientations for reassembly.
Caterpillar Cat 313D2 L Excavator (Prefix LCY) Service Repair Manual (LCY0000...f7siejdkdmd
The document provides disassembly instructions for the final drive, travel motor, and other components of an excavator model 313D2. It lists over 30 detailed steps to disassemble the various systems, including removing covers, plates, gears, seals, valves, pistons, and other parts. Safety warnings are provided throughout to warn of potential injuries from springs, fluids, and heavy components. Required tools are listed at the beginning to properly complete the disassembly.
Caterpillar cat 313 d2 l excavator (prefix lcy) service repair manual (lcy000...dikdkskdmmd
1) The document provides disassembly instructions for the final drive, travel motor, counterbalance valve, and other components of a 313D2 excavator.
2) It describes removing components like sprockets, fittings, plates, and pistons using various tools.
3) Safety precautions are highlighted, such as draining fluids properly and taking care when removing parts under spring tension.
Caterpillar Cat 313D2 L Excavator (Prefix LCY) Service Repair Manual (LCY0000...dxem8295569
The document provides disassembly instructions for the final drive, travel motor, and other components of an excavator model 313D2. It lists the required tools and gives step-by-step instructions to remove parts like sprockets, valves, gears, plates, and seals. Safety warnings are provided to release pressures and springs carefully due to risk of injury from parts propelled by stored energy. Detailed illustrations supplement the text to show how to disassemble each subsystem systematically.
The document provides disassembly instructions for the final drive, travel motor, and other components of an excavator model 313D2. It lists over 30 detailed steps to disassemble the various systems, including removing covers, plates, gears, seals, valves, and other parts. Safety warnings are provided throughout to warn of potential injuries from springs, fluids, and heavy components. Diagrams accompany most steps to illustrate the disassembly process.
Caterpillar cat 313 d2 l excavator (prefix lcy) service repair manual (lcy000...fdhjsekdme
The document provides disassembly instructions for the final drive, travel motor, and various other components of an excavator model 313D2. It lists over 30 detailed steps to disassemble components like the final drive, travel motor, counterbalance valve, and traction control valve. Safety warnings are provided throughout to warn of hazards like parts propelled by springs, hydraulic pressure, and heavy component weights. Required tools are listed at the beginning.
Caterpillar Cat 390F L Excavator (Prefix FEH) Service Repair Manual (FEH00001...f8usiejdkmdd
This document provides instructions for disassembling and assembling the travel motor on a 390F excavator model. It involves 40 steps to disassemble the various components of the travel motor including removing seals, springs, plates, pistons, and bearings. The assembly section outlines 31 steps to reinstall these components in reverse order while ensuring proper cleaning and alignment of parts. Precision tools are required and safety precautions mentioned to avoid injury from spring forces.
Caterpillar Cat 374D L Excavator (Prefix PJA) Service Repair Manual (PJA00001...f8usiejdkmdd
This document provides instructions for disassembling and assembling the final drive of a 374D L Excavator. It describes 34 steps to disassemble the final drive by removing components like the ring gear, carrier assemblies, gears, shafts and seals. It then describes 8 steps for assembling the final drive, which involves cleaning parts, pressing in bearings and pins, installing housings and determining the correct shim number based on bearing preload measurements. The document contains detailed illustrations and lists required tools for each step.
Este documento contiene instrucciones para operar y mantener una máquina. Explica los números de la máquina, las señales de seguridad, cómo subirse y bajarse de la máquina, cómo operar la estación del operador, cómo conducir y operar la máquina, cómo transportarla, el mantenimiento requerido y las especificaciones técnicas.
Caterpillar Cat 374F L Excavator (Prefix DNM) Service Repair Manual (DNM00001...f8usiejdkmdd
This document provides instructions for disassembling and assembling the final drive on a 374F L Excavator. It lists the required tools and presents a step-by-step process to remove and install over 35 individual parts. Key steps include removing the ring gear, carrier assemblies, gears and shafts, and separating the main housing from the motor housing. Proper cleaning and application of sealant is emphasized throughout reassembly.
The document provides instructions for disassembling and assembling the travel motor of a 345C L EXCAVATOR. It lists 31 steps to disassemble the various components of the travel motor using different tools. These components include the head, plates, seals, pins, brake piston, disks, rotating group, shaft assembly, barrels, seals, and more. It emphasizes cleaning parts and marking components to ensure proper reassembly.
More Related Content
Similar to Caterpillar Cat 315F L Excavator (Prefix TDY) Service Repair Manual (TDY00001 and up).pdf
Caterpillar Cat 313D2 L Excavator (Prefix LCY) Service Repair Manual (LCY0000...djdksmmdmd
1) The document provides disassembly instructions for the final drive, travel motor, counterbalance valve, and other components of an excavator model 313D2.
2) It describes removing components like sprockets, fittings, valves, pistons, springs and seals, taking care with heavy or pressurized parts.
3) Detailed steps include draining fluids, using specialty tools, marking part locations for reassembly, and noting the order of alternating plates.
1) The document provides disassembly instructions for the final drive, travel motor, counterbalance valve, and other components of a 313D2 excavator.
2) It describes removing components like sprockets, fittings, plates, and pistons using various tools.
3) Safety precautions are provided, such as draining fluids properly and taking care when removing parts with stored spring energy.
The document provides disassembly instructions for the final drive, travel motor, and other components of an excavator model 313D2. It lists over 30 detailed steps to disassemble the various systems, including removing covers, plates, gears, seals, valves, pistons, and other parts. Safety warnings are provided throughout to warn of potential injuries from springs, fluids, and heavy components. The disassembly process is described in order from exterior cleaning to removal of individual internal parts.
Caterpillar Cat 313D2 L Excavator (Prefix LCY) Service Repair Manual (LCY0000...shun96145luo
The document provides disassembly instructions for the final drive, travel motor, and other components of an excavator model 313D2. It lists over 30 detailed steps to disassemble the various systems, including removing covers, plates, gears, seals, valves, pistons, and other parts. Safety warnings are provided throughout to warn of potential injuries from springs, fluids, and heavy components. Required tools are listed at the beginning to properly complete the disassembly.
The document provides disassembly instructions for the final drive, travel motor, and other components of an excavator model 313D2. It lists over 30 detailed steps to disassemble the various systems, including removing covers, plates, gears, seals, valves, pistons, and other parts. Safety warnings are provided throughout to warn of potential injuries from springs or pressurized fluids. The extensive list of parts and procedures indicates a complex disassembly process for inspection and repair of the excavator transmission and hydraulic systems.
Caterpillar Cat 313D2 L Excavator (Prefix LCY) Service Repair Manual (LCY0000...f7useijdkdmd1
The document provides disassembly instructions for the final drive, travel motor, and other components of a 313D2 excavator. It lists over 30 detailed steps to disassemble the final drive, travel motor, counterbalance valve, and other systems. The instructions include removing components like sprockets, valves, pistons, gears, plates, and seals. Safety notices are provided throughout to warn of potential injuries from parts under spring pressure or hydraulic oil. Required tools are listed at the beginning.
This document provides instructions for disassembling the final drive, travel motor, counterbalance valve, and other components of a 313D2 excavator. It lists required tools and outlines 16 steps to disassemble the final drive, 10 steps to disassemble the counterbalance valve, 7 steps to disassemble the travel motor, and 10 steps to further disassemble the barrel assembly and piston assemblies. Safety notices are included throughout to warn of potential hazards like released spring forces.
Caterpillar cat 313 d2 l excavator (prefix lcy) service repair manual (lcy000...jdfjskekmdme
The document provides disassembly instructions for the final drive, travel motor, and various other components of an excavator model 313D2. It lists over 30 detailed steps to disassemble components like the final drive, travel motor, counterbalance valve, and traction control valve. Safety warnings are provided throughout to warn of hazards like parts propelled by springs, hydraulic pressure, and heavy component weights. Required tools are listed at the beginning.
The document provides disassembly instructions for the final drive, travel motor, and other components of an excavator model 313D2. It lists over 30 detailed steps to disassemble the various systems, including removing covers, plates, gears, seals, valves, and other parts. Safety warnings are provided throughout to warn of hazards such as heavy lifting, pressurized fluids, and released spring forces. Dismantling the components involves draining fluids, using various tools, and carefully tracking part locations for reassembly.
Caterpillar Cat 313D2 L Excavator (Prefix LCY) Service Repair Manual (LCY0000...fjdkksmemd
The document provides disassembly instructions for the final drive, travel motor, and other components of an excavator model 313D2. It lists over 30 detailed steps to disassemble the various systems, including removing covers, plates, gears, seals, valves, pistons, and other parts. Safety warnings are provided throughout to warn of potential injuries from springs, fluids, and heavy components. Diagrams accompany most steps to illustrate the disassembly process.
1) The document provides disassembly instructions for the final drive, travel motor, counterbalance valve, and other components of an excavator model 313D2.
2) It describes removing components like sprockets, fittings, valves, plates, seals, pistons, springs, and more using various tools.
3) Safety precautions are provided, such as draining fluids properly, wearing protective equipment when removing pressurized parts, and noting part orientations for reassembly.
Caterpillar Cat 313D2 L Excavator (Prefix LCY) Service Repair Manual (LCY0000...f7siejdkdmd
The document provides disassembly instructions for the final drive, travel motor, and other components of an excavator model 313D2. It lists over 30 detailed steps to disassemble the various systems, including removing covers, plates, gears, seals, valves, pistons, and other parts. Safety warnings are provided throughout to warn of potential injuries from springs, fluids, and heavy components. Required tools are listed at the beginning to properly complete the disassembly.
Caterpillar cat 313 d2 l excavator (prefix lcy) service repair manual (lcy000...dikdkskdmmd
1) The document provides disassembly instructions for the final drive, travel motor, counterbalance valve, and other components of a 313D2 excavator.
2) It describes removing components like sprockets, fittings, plates, and pistons using various tools.
3) Safety precautions are highlighted, such as draining fluids properly and taking care when removing parts under spring tension.
Caterpillar Cat 313D2 L Excavator (Prefix LCY) Service Repair Manual (LCY0000...dxem8295569
The document provides disassembly instructions for the final drive, travel motor, and other components of an excavator model 313D2. It lists the required tools and gives step-by-step instructions to remove parts like sprockets, valves, gears, plates, and seals. Safety warnings are provided to release pressures and springs carefully due to risk of injury from parts propelled by stored energy. Detailed illustrations supplement the text to show how to disassemble each subsystem systematically.
The document provides disassembly instructions for the final drive, travel motor, and other components of an excavator model 313D2. It lists over 30 detailed steps to disassemble the various systems, including removing covers, plates, gears, seals, valves, and other parts. Safety warnings are provided throughout to warn of potential injuries from springs, fluids, and heavy components. Diagrams accompany most steps to illustrate the disassembly process.
Caterpillar cat 313 d2 l excavator (prefix lcy) service repair manual (lcy000...fdhjsekdme
The document provides disassembly instructions for the final drive, travel motor, and various other components of an excavator model 313D2. It lists over 30 detailed steps to disassemble components like the final drive, travel motor, counterbalance valve, and traction control valve. Safety warnings are provided throughout to warn of hazards like parts propelled by springs, hydraulic pressure, and heavy component weights. Required tools are listed at the beginning.
Similar to Caterpillar Cat 315F L Excavator (Prefix TDY) Service Repair Manual (TDY00001 and up).pdf (16)
Caterpillar Cat 390F L Excavator (Prefix FEH) Service Repair Manual (FEH00001...f8usiejdkmdd
This document provides instructions for disassembling and assembling the travel motor on a 390F excavator model. It involves 40 steps to disassemble the various components of the travel motor including removing seals, springs, plates, pistons, and bearings. The assembly section outlines 31 steps to reinstall these components in reverse order while ensuring proper cleaning and alignment of parts. Precision tools are required and safety precautions mentioned to avoid injury from spring forces.
Caterpillar Cat 374D L Excavator (Prefix PJA) Service Repair Manual (PJA00001...f8usiejdkmdd
This document provides instructions for disassembling and assembling the final drive of a 374D L Excavator. It describes 34 steps to disassemble the final drive by removing components like the ring gear, carrier assemblies, gears, shafts and seals. It then describes 8 steps for assembling the final drive, which involves cleaning parts, pressing in bearings and pins, installing housings and determining the correct shim number based on bearing preload measurements. The document contains detailed illustrations and lists required tools for each step.
Este documento contiene instrucciones para operar y mantener una máquina. Explica los números de la máquina, las señales de seguridad, cómo subirse y bajarse de la máquina, cómo operar la estación del operador, cómo conducir y operar la máquina, cómo transportarla, el mantenimiento requerido y las especificaciones técnicas.
Caterpillar Cat 374F L Excavator (Prefix DNM) Service Repair Manual (DNM00001...f8usiejdkmdd
This document provides instructions for disassembling and assembling the final drive on a 374F L Excavator. It lists the required tools and presents a step-by-step process to remove and install over 35 individual parts. Key steps include removing the ring gear, carrier assemblies, gears and shafts, and separating the main housing from the motor housing. Proper cleaning and application of sealant is emphasized throughout reassembly.
The document provides instructions for disassembling and assembling the travel motor of a 345C L EXCAVATOR. It lists 31 steps to disassemble the various components of the travel motor using different tools. These components include the head, plates, seals, pins, brake piston, disks, rotating group, shaft assembly, barrels, seals, and more. It emphasizes cleaning parts and marking components to ensure proper reassembly.
Caterpillar Cat 345C L Hydraulic Excavator (Prefix GPH) Service Repair Manual...f8usiejdkmdd
This document provides instructions for disassembling and assembling the travel motor of a 345C L Hydraulic Excavator. The disassembly procedure involves 31 steps to remove components like the head, plates, disks, rotating group, seals and more. The assembly procedure involves 13 steps and notes to clean parts, apply lubricant, set proper measurements and orientations when reinstalling components like the washers, spacers and seals. Special tools are listed for tasks like removing bearings and installing seals.
The document provides instructions for disassembling and assembling the travel motor of an excavator model 345B. It lists 31 steps to disassemble parts like the head, plates, seals, pistons, and housing. It then lists 27 steps to reassemble these parts in reverse order, making sure to clean parts and apply lubricant. Proper installation of seals, washers, and keys is emphasized.
This document provides instructions for disassembling and assembling the swing drive of a 340F Excavator. The disassembly procedure involves removing 27 parts from the swing drive including the cover, sun gear, carrier assembly, planetary gears, ring gear, pinion shaft, and bearings. The assembly procedure instructs installing lip seals and bearings on the cage and pinion shaft before lowering the cage over the pinion shaft and installing the bearing.
This document provides instructions for removing and installing an exhaust manifold and inlet and exhaust valves on a 325-A FM L EXCAVATOR 7LM. It describes:
1) Removing the bolts, exhaust manifold, and gaskets from the cylinder head to remove the exhaust manifold.
2) Installing new gaskets and mounting the exhaust manifold to the cylinder head, applying anti-seize compound and torqueing bolts.
3) Removing inlet and exhaust valves by compressing springs, removing retainers and springs, and removing seals and valves.
This document provides instructions for removing and installing a cylinder head on an excavator. It begins by listing other components that must first be removed, such as the fuel filter base, governor, fuel linkage, and manifolds. The removal procedure then instructs technicians to attach a lifting device to the cylinder head and remove bolts holding it to the cylinder block before removing the gasket. The installation procedure lists cleaning the mating surfaces and applying lubricant to the gasket before positioning the head and torquing the bolts to specifications.
Caterpillar Cat 385C L Excavator (Prefix T2E) Service Repair Manual (T2E00001...f8usiejdkmdd
This document provides instructions for disassembling and assembling the final drive of a 385C L Excavator. The disassembly process involves removing over 30 individual parts in a specific sequence. The assembly process reverses the disassembly steps and provides additional details on cleaning, lubricating, and setting bearing preloads using shims. Proper tools and lifting devices are required due to the large size and weight of many components. Cleanliness is emphasized throughout to prevent damage to precision parts from contaminants.
This document provides instructions for removing and installing the front gear group of a C18 engine. The removal procedure involves removing 14 bolts, plates, gears and seals. Special care must be taken to mark gear orientations and not turn the crankshaft during removal. The installation procedure details cleaning components, applying thread lock compound, installing 14 gears, plates and seals in the correct order and orientation, and adjusting backlash. Proper removal and installation is important to avoid engine damage.
This document provides instructions for disassembling and assembling the travel motor on a 390F excavator model. It involves over 40 steps to fully disassemble the travel motor by removing components like the head, relief valves, pistons, plates, seals, bearings, and housing. Special tools are required and safety precautions must be followed when removing spring-loaded or heavy parts. The assembly process reverses the disassembly steps and requires cleaning and lubricating parts before reinstallation.
Caterpillar Cat 385C L Excavator (Prefix EDA) Service Repair Manual (EDA00001...f8usiejdkmdd
This document provides instructions for disassembling and assembling the final drive of a 385C L Excavator. It lists the required tools and parts. The disassembly process involves removing over 30 components from the final drive housing in a specific sequence, including carrier assemblies, sun gears, planetary gear sets, and seals. The assembly process reverses the disassembly steps and provides notes on cleaning, inspecting, lubricating, and installing replacement parts as needed.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
2. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 315F LCR EXCAVATOR TDY
Configuration: 315F L Excavator TDY00001-UP (MACHINE) POWERED BY C4.4 Engine
Disassembly and Assembly
314F and 315F Excavators Machine Systems
Media Number -UENR6792-03 Publication Date -01/09/2015 Date Updated -14/12/2017
i05025972
Final Drive and Travel Motor - Disassemble
SMCS - 4050-015; 4351-015
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7573 Link Bracket 3
B 1P-2420 Transmission Repair Stand 1
C 8T-6699 Bolts 2
D
1P-0074 Slide Hammer Puller Gp 1
4C-5666 Threaded Adapter 1
123-6702 Backlash Gauge Gp 1
E 1P-0510 Driver Gp 1
F 8H-0663 Bearing Puller Gp 1
G 1P-1863 Retaining Ring Pliers 1
H 9U-7346 Spanner Wrench As 1
Start By:
a. Remove the final drive and the travel motor. Refer to Disassembly and Assembly Manual ,
"Final Drive and Travel Motor - Remove".
NOTICE
1/23
315F L Excavator TDY00001-UP (MACHINE) POWERED BY C4.4 Engine(M00662...
2020/12/11
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat products.
Dispose of all fluids according to local regulations and mandates.
Personal injury can result from hydraulic oil pressure and hot oil.
Hydraulic oil pressure can remain in the hydraulic system after the
engine has been stopped. Serious injury can be caused if this pressure is
not released before any service is done on the hydraulic system.
Make sure all of the work tools have been lowered to the ground, and
the oil is cool before removing any components or lines. Remove the oil
filler cap only when the engine is stopped, and the filler cap is cool
enough to touch with your bare hand.
1. Thoroughly clean the outside of the final drive and travel motor prior to disassembly.
2. Remove the sprocket from the final drive and the travel motor. The weight of the sprocket is
approximately 39 kg (85 lb).
3. Mark the alignment of the final drive and travel motor for reassembly purposes. The parts
must be reinstalled in the original locations.
2/23
315F L Excavator TDY00001-UP (MACHINE) POWERED BY C4.4 Engine(M00662...
2020/12/11
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. Illustration 1 g00940682
4. Use Tooling (A) and a suitable lifting device to position the final drive and the travel motor
onto Tooling (B). The combined weight of the final drive and travel motor is approximately
170 kg (375 lb).
5. Drain the oil from the final drive into a suitable container for storage or for disposal. Refer
to Operation and Maintenance Manual, "Capacities (Refill)" for the capacity of the final
drive.
6. Remove fittings (1). Remove fittings (2) from traction control valve (3).
7. Remove nine bolts (4) that secure traction control valve (3) to the final drive.
8. Use two persons to remove traction control valve (3) from the final drive. The weight of
travel brake valve (3) is approximately 27 kg (60 lb).
3/23
315F L Excavator TDY00001-UP (MACHINE) POWERED BY C4.4 Engine(M00662...
2020/12/11
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. Illustration 2 g00940716
9. Remove valve plate (5) and O-ring seal (6).
Illustration 3 g01405139
10. Use Tooling (D) to remove bearing (7).
Disassembly of the Counterbalance Valve
Illustration 4 g01405725
4/23
315F L Excavator TDY00001-UP (MACHINE) POWERED BY C4.4 Engine(M00662...
2020/12/11
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. Illustration 5 g01405227
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
1. Position the counterbalance valve, as shown. Remove plug (8) and adapter (9).
2. Remove spring (10) and spool (11).
Illustration 6 g01405232
5/23
315F L Excavator TDY00001-UP (MACHINE) POWERED BY C4.4 Engine(M00662...
2020/12/11
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. 3. Remove relief valve assemblies (12).
Illustration 7 g01405243
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
4. Remove seat (13). Seat (13) is pressed onto valve (17). Use new parts if seat (13) or valve
(17) is damaged. Do not disassemble these components. Make sure that you reuse the other
component.
5. Remove backup ring (14) and O-ring seal (15).
6. Remove O-ring seal (22).
7. Remove nut (20).
8. Remove screw (27).
9. Remove stopper (26). Remove backup ring (19) and O-ring seal (18) from stopper (19).
10. Remove valve (21), piston (25), and spring (16) from the housing.
11. Remove backup ring (23) and O-ring seal (24) from piston (25).
6/23
315F L Excavator TDY00001-UP (MACHINE) POWERED BY C4.4 Engine(M00662...
2020/12/11
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. Illustration 8 g01405284
Illustration 9 g01405299
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
12. Remove covers (28) and the O-ring seals.
13. Remove springs (29), guides (30), and spool assembly (31).
7/23
315F L Excavator TDY00001-UP (MACHINE) POWERED BY C4.4 Engine(M00662...
2020/12/11
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. Illustration 10 g01405345
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
14. Remove valve (32), spring (33), and ball (34) from one end of spool (35). Repeat for the
other end of spool (35).
Illustration 11 g01405633
8/23
315F L Excavator TDY00001-UP (MACHINE) POWERED BY C4.4 Engine(M00662...
2020/12/11
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
15. Remove plug (36), spring (38), and piston (39) from both sides of the housing assembly.
16. Remove O-ring seal (37) from each plug (36).
Note: Remove the remaining allen head bolts from the housing assembly for cleaning
purposes, if necessary. Each allen head bolt has an O-ring seal. Check the O-ring seal for
wear or for damage. Replace the O-ring seal, if necessary.
Disassembly of the Travel Motor
Illustration 12 g01405794
1. Remove O-ring seal (40) and springs (41).
9/23
315F L Excavator TDY00001-UP (MACHINE) POWERED BY C4.4 Engine(M00662...
2020/12/11
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. Illustration 13 g01405828
2. Install Tooling (C) onto piston assembly (42). Use Tooling (C) and a suitable prybar to
remove piston assembly (42) from body (43).
Illustration 14 g01405855
3. Remove O-ring seals (45) and (46) from piston assembly (42). Remove backup rings (44)
and (47) from piston assembly (42).
10/23
315F L Excavator TDY00001-UP (MACHINE) POWERED BY C4.4 Engine(M006...
2020/12/11
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. Illustration 15 g01405867
4. Use suitable drivers or a suitable lever to remove guide assembly (48).
Illustration 16 g01405885
5. Remove O-ring seal (49) and backup ring (50) from guide assembly (48).
11/23
315F L Excavator TDY00001-UP (MACHINE) POWERED BY C4.4 Engine(M006...
2020/12/11
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. Illustration 17 g01406117
6. Remove four separator plates (51) and four friction plates (52). Note the alternating order of
separator plates (51) and friction plates (52) for assembly purposes.
Note: Do not allow the components of barrel assembly (53) to come apart while you
remove barrel assembly (53). The components of barrel assembly (53) must be reinstalled
into the original positions.
Note: Oil will drain from the final drive. Place a suitable container under the final drive for
storage or disposal. Refer to Operation and Maintenance Manual, "Capacities (Refill)" for
the fluid capacity of the final drive.
7. Position the final drive horizontally.
8. Remove barrel assembly (53).
12/23
315F L Excavator TDY00001-UP (MACHINE) POWERED BY C4.4 Engine(M006...
2020/12/11
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. Illustration 18 g01406180
Note: Mark the component locations for assembly purposes before you disassemble barrel
assembly (53).
9. Remove piston assemblies (54) and retainer (55) from barrel assembly (53).
Illustration 19 g01406210
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
10. Remove retainer (56), spacer (57), and springs (58) from barrel assembly (53).
13/23
315F L Excavator TDY00001-UP (MACHINE) POWERED BY C4.4 Engine(M006...
2020/12/11
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. Illustration 20 g01406263
11. Put location marks on cam plate (59) for assembly purposes. Make sure that the thick end of
cam plate (59) is near the opening that is across body (43). Remove cam plate (59).
Illustration 21 g01406329
Illustration 22 g01406338
14/23
315F L Excavator TDY00001-UP (MACHINE) POWERED BY C4.4 Engine(M006...
2020/12/11
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
12. Remove piston (60) and spring (62).
13. Remove key (61).
Disassembly of the Final Drive
Illustration 23 g01406376
1. Use a suitable lifting device to position the final drive on Tooling (B), as shown. The weight
of the final drive is approximately 200 kg (441 lb).
2. Remove plugs (63). Remove the O-ring seals from plugs (63). Check the O-ring seals for
wear or for damage. Replace the O-ring seals, if necessary.
3. Remove bolts (65). Remove cover (64).
15/23
315F L Excavator TDY00001-UP (MACHINE) POWERED BY C4.4 Engine(M006...
2020/12/11
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. Illustration 24 g01406386
4. Raise the temperature of bolts (66) in order to loosen the thread sealant.
5. Remove bolts (66) and plate (67).
Illustration 25 g01406397
6. Remove sun gear (68).
16/23
315F L Excavator TDY00001-UP (MACHINE) POWERED BY C4.4 Engine(M006...
2020/12/11
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. Illustration 26 g01406400
7. Attach Tooling (A) and a suitable lifting device to carrier assembly (69). Remove carrier
assembly (69), planetary gear assembly (70), and bearing assembly (71) as a unit.
Illustration 27 g01406789
8. Remove planetary gear (70) and bearing assembly (71) from carrier assembly (69). Remove
the remaining planetary gears (70) and bearings (71).
Illustration 28 g01406822
9. Remove sun gear (72).
17/23
315F L Excavator TDY00001-UP (MACHINE) POWERED BY C4.4 Engine(M006...
2020/12/11
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
19. 10. Raise the temperature of bolts (73) in order to loosen the thread sealant. Remove bolts (73).
Remove plate (74).
Illustration 29 g01406850
11. Remove retaining ring (75) from sun gear (72). Check retaining ring (75) for wear or for
damage. Replace retaining ring (75), if necessary.
Illustration 30 g01406853
12. Remove planetary gear (76).
18/23
315F L Excavator TDY00001-UP (MACHINE) POWERED BY C4.4 Engine(M006...
2020/12/11
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
20. Illustration 31 g01406875
13. Remove bearing (77), race (78), and thrust washer (79).
14. Repeat Steps 12 and 13 in order to remove the remaining planetary gear assemblies.
Illustration 32 g01406882
15. Remove bolt (80) and plate (81).
19/23
315F L Excavator TDY00001-UP (MACHINE) POWERED BY C4.4 Engine(M006...
2020/12/11
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
21. Illustration 33 g01406885
Illustration 34 g01406886
16. Use Tooling (H) to remove nut (82).
Illustration 35 g01406906
17. Install Tooling (A) and a suitable lifting device to housing (83). The weight of housing (83)
is approximately 35 kg (77 lb).
18. Remove housing (83) from body assembly (84).
20/23
315F L Excavator TDY00001-UP (MACHINE) POWERED BY C4.4 Engine(M006...
2020/12/11
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
22. Illustration 36 g01406912
19. Remove Duo-Cone Seal Gp seal (85) from the body assembly. Remove the Duo-Cone Seal
Gp seal from the housing.
Illustration 37 g01407100
20. Remove both bearings (86) from housing (83).
21/23
315F L Excavator TDY00001-UP (MACHINE) POWERED BY C4.4 Engine(M006...
2020/12/11
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
23. Illustration 38 g01407089
21. Remove both bearings (87) from housing (83).
Illustration 39 g01407115
22. Position body assembly (84) horizontally. Remove shaft assembly (88), the bearing, and the
retaining ring.
22/23
315F L Excavator TDY00001-UP (MACHINE) POWERED BY C4.4 Engine(M006...
2020/12/11
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
24. Illustration 40 g01407144
23. Use Tooling (G) to remove retaining ring (89) from shaft assembly (88).
Illustration 41 g01407161
24. Use Tooling (E), Tooling (F), and a suitable press to remove bearing (90).
Illustration 42 g01407166
25. Remove lip seal (91) from the body assembly.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Fri Dec 11 10:22:53 UTC+0800 2020
23/23
315F L Excavator TDY00001-UP (MACHINE) POWERED BY C4.4 Engine(M006...
2020/12/11
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
25. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
26. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 315F LCR EXCAVATOR TDY
Configuration: 315F L Excavator TDY00001-UP (MACHINE) POWERED BY C4.4 Engine
Disassembly and Assembly
314F and 315F Excavators Machine Systems
Media Number -UENR6792-03 Publication Date -01/09/2015 Date Updated -14/12/2017
i07219742
Final Drive and Travel Motor - Disassemble
SMCS - 4050-015; 4351-015
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 422-5474 M16x2x24 mm Lifting Eye Assembly 2
B 1P-2420 Transmission Repair Stand 1
C 8H-0663 Bearing Puller Assembly 1
D 422-5473 M12x1.75x21 mm Lifting Eye Assembly 2
E 422-5472 M10x1.5x16 mm Lifting Eye Assembly 2
F 1U-9895 Crossblock 1
Start By:
a. Remove the final drive and the travel motor assembly.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
1/22
315F L Excavator TDY00001-UP (MACHINE) POWERED BY C4.4 Engine(M00662...
2020/12/11
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
27. Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat®
products.
Dispose of all fluids according to local regulations and mandates.
Personal injury can result from hydraulic oil pressure and hot oil.
Hydraulic oil pressure can remain in the hydraulic system after the
engine has been stopped. Serious injury can be caused if this pressure is
not released before any service is done on the hydraulic system.
Make sure all of the work tools have been lowered to the ground, and
the oil is cool before removing any components or lines. Remove the oil
filler cap only when the engine is stopped, and the filler cap is cool
enough to touch with your bare hand.
1. Thoroughly clean the outside of the final drive and travel motor prior to disassembly.
2. Remove the sprocket from the final drive and the travel motor assembly. The weight of the
sprocket is approximately 39 kg (85 lb).
3. Mark the alignment of the final drive and travel motor for reassembly purposes. The parts
must be reinstalled in the original locations.
Illustration 1 g06256385
4. Use Tooling (A) and a suitable lifting device to position final drive assembly (1) onto
Tooling (B). The weight of final drive assembly (1) is approximately 163 kg (360 lb).
2/22
315F L Excavator TDY00001-UP (MACHINE) POWERED BY C4.4 Engine(M00662...
2020/12/11
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
28. 5. Drain the oil from final drive assembly (1) into a suitable container for storage or for
disposal. Refer to Operation and Maintenance Manual, "Capacities (Refill)" for the capacity
of the final drive.
Illustration 2 g06256798
6. Remove plug (2), plugs (3), and the O-ring seals.
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
Illustration 3 g06256843
3/22
315F L Excavator TDY00001-UP (MACHINE) POWERED BY C4.4 Engine(M00662...
2020/12/11
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...