This document provides instructions for disassembling the final drive, travel motor, counterbalance valve, and other components of a 313D2 excavator. It lists required tools and outlines 16 steps to disassemble the final drive, 10 steps to disassemble the counterbalance valve, 7 steps to disassemble the travel motor, and 10 steps to further disassemble the barrel assembly and piston assemblies. Safety notices are included throughout to warn of potential hazards like released spring forces.
The document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of an excavator model 313D2. It lists over 30 detailed steps to disassemble components like the final drive housing, travel motor barrel assembly, piston assemblies, gears, seals and other parts. Tools required include link brackets, a transmission repair stand, bolts, pullers, retaining ring pliers and other specialized tools. Safety notices are provided to properly release pressures and contain fluids.
Caterpillar cat 313 d2 l excavator (prefix lcy) service repair manual (lcy000...fjkskefksmeme
The document provides disassembly instructions for a 313D2 excavator final drive and travel motor. It lists required tools and outlines 23 steps to disassemble the components, including removing covers, plates, gears, seals, pistons, springs and other parts. Personal injury warnings are provided regarding hydraulic pressure, released spring forces, and lifting heavy components.
The document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of an excavator model 313D2. It lists required tools and gives step-by-step instructions to remove components such as sprockets, valves, pistons, gears, seals and plates. Safety warnings are provided to release pressures and contain fluids. Dismantling involves removing covers, draining oil, loosening bolts, and using pullers and pry bars to separate interconnected parts in a specified sequence.
This document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 313D2 excavator. It lists required tools and outlines over 30 steps to disassemble components such as sprockets, valves, pistons, gears, seals, and plates. Safety notices are included to warn of risks like fluids, pressures, and released springs during disassembly.
This document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 313D2 excavator. It lists required tools and outlines over 30 steps to disassemble components such as sprockets, valves, pistons, gears, seals, and plates. Safety notices are included to warn of risks like fluids, pressures, and released springs during disassembly.
Caterpillar Cat 315F L and 315F LCR Excavator (Prefix TDY) Service Repair Man...ze6074xunong
This document provides instructions for disassembling various components of an excavator final drive and travel motor system. It outlines 17 specific disassembly steps, including draining fluids, removing covers, valves, plates, seals, springs, pistons, and other parts. Proper safety precautions and required tools are noted. The goal is to disassemble the components for cleaning or replacement of worn parts prior to reassembly.
Caterpillar Cat 315F L and 315F LCR Excavator (Prefix TDY) Service Repair Man...f8usejkdmmd8i
This document provides instructions for disassembling various components of an excavator final drive and travel motor system. It outlines 17 specific disassembly steps, including draining fluids, removing covers, valves, springs, seals, and other parts. Special safety notices are included to warn of potential hazards like released spring forces or pressurized hydraulic systems. Detailed illustrations accompany each step to show how to properly disassemble the components.
Caterpillar Cat 315F L and 315F LCR Excavator (Prefix TDY) Service Repair Man...yu5676962
This document provides disassembly instructions for the final drive and travel motor of a 315F LCR excavator. It outlines over 30 steps to disassemble both components, including removing covers, plates, gears, seals, valves, pistons, and other internal parts. Safety notices are included throughout to warn of potential hazards like released spring forces or pressurized fluids. Detailed illustrations accompany each step to show how to position the components and which fasteners, tools and ordering to use for complete disassembly of the final drive and travel motor systems.
The document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of an excavator model 313D2. It lists over 30 detailed steps to disassemble components like the final drive housing, travel motor barrel assembly, piston assemblies, gears, seals and other parts. Tools required include link brackets, a transmission repair stand, bolts, pullers, retaining ring pliers and other specialized tools. Safety notices are provided to properly release pressures and contain fluids.
Caterpillar cat 313 d2 l excavator (prefix lcy) service repair manual (lcy000...fjkskefksmeme
The document provides disassembly instructions for a 313D2 excavator final drive and travel motor. It lists required tools and outlines 23 steps to disassemble the components, including removing covers, plates, gears, seals, pistons, springs and other parts. Personal injury warnings are provided regarding hydraulic pressure, released spring forces, and lifting heavy components.
The document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of an excavator model 313D2. It lists required tools and gives step-by-step instructions to remove components such as sprockets, valves, pistons, gears, seals and plates. Safety warnings are provided to release pressures and contain fluids. Dismantling involves removing covers, draining oil, loosening bolts, and using pullers and pry bars to separate interconnected parts in a specified sequence.
This document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 313D2 excavator. It lists required tools and outlines over 30 steps to disassemble components such as sprockets, valves, pistons, gears, seals, and plates. Safety notices are included to warn of risks like fluids, pressures, and released springs during disassembly.
This document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 313D2 excavator. It lists required tools and outlines over 30 steps to disassemble components such as sprockets, valves, pistons, gears, seals, and plates. Safety notices are included to warn of risks like fluids, pressures, and released springs during disassembly.
Caterpillar Cat 315F L and 315F LCR Excavator (Prefix TDY) Service Repair Man...ze6074xunong
This document provides instructions for disassembling various components of an excavator final drive and travel motor system. It outlines 17 specific disassembly steps, including draining fluids, removing covers, valves, plates, seals, springs, pistons, and other parts. Proper safety precautions and required tools are noted. The goal is to disassemble the components for cleaning or replacement of worn parts prior to reassembly.
Caterpillar Cat 315F L and 315F LCR Excavator (Prefix TDY) Service Repair Man...f8usejkdmmd8i
This document provides instructions for disassembling various components of an excavator final drive and travel motor system. It outlines 17 specific disassembly steps, including draining fluids, removing covers, valves, springs, seals, and other parts. Special safety notices are included to warn of potential hazards like released spring forces or pressurized hydraulic systems. Detailed illustrations accompany each step to show how to properly disassemble the components.
Caterpillar Cat 315F L and 315F LCR Excavator (Prefix TDY) Service Repair Man...yu5676962
This document provides disassembly instructions for the final drive and travel motor of a 315F LCR excavator. It outlines over 30 steps to disassemble both components, including removing covers, plates, gears, seals, valves, pistons, and other internal parts. Safety notices are included throughout to warn of potential hazards like released spring forces or pressurized fluids. Detailed illustrations accompany each step to show how to position the components and which fasteners, tools and ordering to use for complete disassembly of the final drive and travel motor systems.
This document provides maintenance information for Clark PT-5, PT-7, PTT-5, and PTT-7 trucks. It includes specifications, planned maintenance schedules, adjustment procedures, and electrical and transmission repair instructions. The planned maintenance section outlines safety checks and lubrication schedules to perform at regular intervals, such as daily, monthly, and yearly, to keep the trucks in good operating condition.
This document provides specifications, maintenance schedules, adjustment procedures, and safety guidelines for Clark PT-5, PT-7, PTT-5, and PTT-7 trucks. It outlines an essential planned maintenance program to ensure safe operation and maximize component life. Safety practices for maintenance include properly positioning trucks, disconnecting power sources, and following the manufacturer's procedures. Only trained personnel should perform maintenance following the instructions in this manual.
This document provides specifications, maintenance schedules, and repair procedures for Clark PT-5, PT-7, PTT-5, and PTT-7 trucks. It includes sections on specifications, planned maintenance, adjustments, electrical systems, transmissions, and safety practices. The planned maintenance section outlines inspection and lubrication intervals, with tasks grouped into daily, monthly, quarterly, biannual, and annual maintenance checks.
Clark C500, Y350 Forklift Service Repair Manual.pdff7useijdkdmd1
This document contains a pictorial index and maintenance instructions for Clark forklifts. It is intended only for Clark dealers and lists parts, components, and procedures for repair and maintenance. Copyrighted material and distribution restrictions are noted. Safety practices for maintenance personnel are outlined.
Clark C500, Y300L Forklift Service Repair Manual.pdff7useijdkdmd1
This document contains a pictorial index and maintenance instructions for Clark forklifts. It is intended only for Clark dealers and not for public distribution. The index covers various systems of the forklift like the engine, transmission, hydraulics, brakes and electrical systems. It provides diagrams and guides technicians through troubleshooting, removing and replacing components, and adjusting various parts of the forklift. Safety warnings and best practices are outlined for technicians to follow when performing maintenance.
Clark CMP 45 Forklift Service Repair Manual.pdff7useijdkdmd1
This document provides instructions for safely lifting, jacking, and blocking a Clark forklift truck. It describes approved lifting points on the truck and procedures for raising different parts, including the drive wheels, entire front, and rear. Blocking is recommended whenever raising parts to prevent accidental rolling or movement. Safety practices like parking on level ground, engaging brakes, and removing keys are advised before beginning any work.
Clark CMP 40 Forklift Service Repair Manual.pdff7useijdkdmd1
The document provides safety guidelines for maintaining Clark industrial trucks. It lists 21 safe maintenance practices, such as raising drive wheels before working on the truck, disconnecting the battery, checking for fuel leaks, using qualified personnel, and ensuring proper ventilation. Special precautions are outlined for hazardous areas and modifications to trucks. References to additional safety standards from ANSI, NFPA, and OSHA are also provided.
Clark CMP 50S Forklift Service Repair Manual.pdff7useijdkdmd1
The document provides safety guidelines for maintaining Clark industrial trucks. It lists 21 safe maintenance practices, such as raising drive wheels before working on the truck, disconnecting the battery, checking for fuel leaks, using qualified personnel, and ensuring proper ventilation. Special precautions are outlined for hazardous areas and modifications to trucks. References to additional safety standards from ANSI, NFPA, and OSHA are also provided.
Clark CGP 70 Forklift Service Repair Manual.pdff7useijdkdmd1
The document provides information on Clark's planned maintenance program including:
- The planned maintenance program consists of basic inspections, adjustments, and lubrications performed every 50-250 hours.
- A systematic approach is outlined that includes external visual checks, operational checks, and under-the-hood tests/adjustments.
- The recommended planned maintenance tasks are listed by service manual group and include checks of fluids, filters, lubrication points, and critical fasteners as well as functional tests of vehicle systems.
Clark CGP 40 Forklift Service Repair Manual.pdff7useijdkdmd1
The document provides information on Clark's planned maintenance program including:
- The planned maintenance program consists of basic inspections, adjustments, and lubrications performed every 50-250 hours.
- A systematic approach is outlined that includes external visual checks, operational checks, and under-the-hood tests/adjustments.
- The recommended planned maintenance tasks are listed by service manual group and include checks of fluids, filters, lubrication points, and critical fasteners as well as functional tests of vehicle systems.
Clark CGC 70 Forklift Service Repair Manual.pdff7useijdkdmd1
The document provides information on Clark's planned maintenance program including:
- The planned maintenance program consists of basic inspections, adjustments, and lubrications performed every 50-250 hours.
- A systematic approach is outlined that includes external visual checks, operational checks, and under-the-hood tests/adjustments.
- The recommended planned maintenance tasks are listed by service manual group and include checks of fluids, filters, lubrication points, and critical fasteners as well as functional tests of vehicle systems.
Clark CGC 40 Forklift Service Repair Manual.pdff7useijdkdmd1
This document provides information about periodic maintenance schedules for Clark lift trucks. It discusses the terms "periodic service" and "planned maintenance" and how they relate to regularly scheduled maintenance tasks. It provides details on determining appropriate maintenance intervals based on operating conditions. The document includes a service chart that indicates basic maintenance tasks and recommended intervals. It also includes a recommended periodic service schedule chart that lists specific maintenance tasks, the suggested time intervals to perform them, and the service manual group where the task is covered.
Clark C500, Y300S Forklift Service Repair Manual.pdff7useijdkdmd1
This document provides instructions and guidelines for performing planned maintenance (PM) on Clark lift trucks. It outlines the importance of regular inspections and lubrication for long life and trouble-free operation. Technicians should use the provided PM report form as a checklist to document their inspection findings and any needed repairs. Safety precautions are listed, such as disconnecting the battery before working on electrical components. A visual inspection of the entire truck is described, including components like the overhead guard, carriage, forks, and hydraulic and electrical systems. Records of inspections should be kept and repairs authorized by the appropriate personnel.
Clark C500, Y225S Forklift Service Repair Manual.pdff7useijdkdmd1
This document contains a pictorial index and maintenance instructions for Clark forklifts. It is intended only for Clark dealers and lists parts, components, and procedures for repair and maintenance. Copyrighted material and distribution restrictions are noted. Safety practices for maintenance and repair are outlined.
Clark C500, Y180 Forklift Service Repair Manual.pdff7useijdkdmd1
This document contains a pictorial index and maintenance instructions for Clark forklifts. It is intended only for Clark dealers and should not be distributed. The document contains diagrams and descriptions of various forklift components and systems, grouped by number. Safety warnings and instructions for safe maintenance practices are also provided.
Clark C500, Y250S Forklift Service Repair Manual.pdff7useijdkdmd1
This document contains a pictorial index and maintenance instructions for Clark forklifts. It is intended only for Clark dealers and lists parts, components, and procedures for repair and maintenance. Copyrighted material and distribution restrictions are noted. Safety practices for maintenance personnel are outlined.
Clark C500, Y225L Forklift Service Repair Manual.pdff7useijdkdmd1
This document contains a pictorial index and maintenance instructions for Clark forklifts. It is intended only for Clark dealers and not for public distribution. The index covers various systems of the forklift like the engine, transmission, hydraulics, brakes and electrical systems. It provides diagrams and guides technicians through troubleshooting, removing and replacing components, and adjusting various parts of the forklift. Safety warnings and best practices are outlined for technicians to follow when performing maintenance.
Clark C500, Y200 Forklift Service Repair Manual.pdff7useijdkdmd1
This document provides instructions and guidelines for performing planned maintenance (PM) on Clark lift trucks. It outlines the importance of regular inspections and recommends using a PM report form to document the inspections. Safety precautions are described, such as disconnecting the battery before working on electrical components. A visual inspection process is outlined to check for issues like leaks, loose or damaged parts, and worn components. Inspections of specific systems like the uprights, forks, and hydraulic lines are detailed. Record-keeping of inspection results is advised to aid in maintenance planning.
Clark C15-32C LG Forklift Service Repair Manual.pdff7useijdkdmd1
This document provides instructions for safely maintaining a forklift truck. It describes how to safely raise the truck using blocks or jacks, including lifting the front with chains under the upright rails or jacking under designated frame points. Blocking procedures are outlined to securely support lifted components like the upright for maintenance access. Workers are advised to follow manufacturer safety guidelines and use adequately rated equipment for any lifting, jacking or maintenance tasks.
Caterpillar Cat 336F L Excavator (Prefix RKB) Service Repair Manual (RKB00001...f7useijdkdmd1
This document provides instructions for disassembling the travel motor on a 336F L excavator. It describes 27 steps to remove components such as the motor head assembly, springs, seals, relief valves, plugs and port plate. Tools required include a transmission repair stand, lifting eye assembly, driver group, retaining ring pliers and bearing puller group. Safety precautions are provided to release spring forces and contain fluids during disassembly.
This document provides maintenance information for Clark PT-5, PT-7, PTT-5, and PTT-7 trucks. It includes specifications, planned maintenance schedules, adjustment procedures, and electrical and transmission repair instructions. The planned maintenance section outlines safety checks and lubrication schedules to perform at regular intervals, such as daily, monthly, and yearly, to keep the trucks in good operating condition.
This document provides specifications, maintenance schedules, adjustment procedures, and safety guidelines for Clark PT-5, PT-7, PTT-5, and PTT-7 trucks. It outlines an essential planned maintenance program to ensure safe operation and maximize component life. Safety practices for maintenance include properly positioning trucks, disconnecting power sources, and following the manufacturer's procedures. Only trained personnel should perform maintenance following the instructions in this manual.
This document provides specifications, maintenance schedules, and repair procedures for Clark PT-5, PT-7, PTT-5, and PTT-7 trucks. It includes sections on specifications, planned maintenance, adjustments, electrical systems, transmissions, and safety practices. The planned maintenance section outlines inspection and lubrication intervals, with tasks grouped into daily, monthly, quarterly, biannual, and annual maintenance checks.
Clark C500, Y350 Forklift Service Repair Manual.pdff7useijdkdmd1
This document contains a pictorial index and maintenance instructions for Clark forklifts. It is intended only for Clark dealers and lists parts, components, and procedures for repair and maintenance. Copyrighted material and distribution restrictions are noted. Safety practices for maintenance personnel are outlined.
Clark C500, Y300L Forklift Service Repair Manual.pdff7useijdkdmd1
This document contains a pictorial index and maintenance instructions for Clark forklifts. It is intended only for Clark dealers and not for public distribution. The index covers various systems of the forklift like the engine, transmission, hydraulics, brakes and electrical systems. It provides diagrams and guides technicians through troubleshooting, removing and replacing components, and adjusting various parts of the forklift. Safety warnings and best practices are outlined for technicians to follow when performing maintenance.
Clark CMP 45 Forklift Service Repair Manual.pdff7useijdkdmd1
This document provides instructions for safely lifting, jacking, and blocking a Clark forklift truck. It describes approved lifting points on the truck and procedures for raising different parts, including the drive wheels, entire front, and rear. Blocking is recommended whenever raising parts to prevent accidental rolling or movement. Safety practices like parking on level ground, engaging brakes, and removing keys are advised before beginning any work.
Clark CMP 40 Forklift Service Repair Manual.pdff7useijdkdmd1
The document provides safety guidelines for maintaining Clark industrial trucks. It lists 21 safe maintenance practices, such as raising drive wheels before working on the truck, disconnecting the battery, checking for fuel leaks, using qualified personnel, and ensuring proper ventilation. Special precautions are outlined for hazardous areas and modifications to trucks. References to additional safety standards from ANSI, NFPA, and OSHA are also provided.
Clark CMP 50S Forklift Service Repair Manual.pdff7useijdkdmd1
The document provides safety guidelines for maintaining Clark industrial trucks. It lists 21 safe maintenance practices, such as raising drive wheels before working on the truck, disconnecting the battery, checking for fuel leaks, using qualified personnel, and ensuring proper ventilation. Special precautions are outlined for hazardous areas and modifications to trucks. References to additional safety standards from ANSI, NFPA, and OSHA are also provided.
Clark CGP 70 Forklift Service Repair Manual.pdff7useijdkdmd1
The document provides information on Clark's planned maintenance program including:
- The planned maintenance program consists of basic inspections, adjustments, and lubrications performed every 50-250 hours.
- A systematic approach is outlined that includes external visual checks, operational checks, and under-the-hood tests/adjustments.
- The recommended planned maintenance tasks are listed by service manual group and include checks of fluids, filters, lubrication points, and critical fasteners as well as functional tests of vehicle systems.
Clark CGP 40 Forklift Service Repair Manual.pdff7useijdkdmd1
The document provides information on Clark's planned maintenance program including:
- The planned maintenance program consists of basic inspections, adjustments, and lubrications performed every 50-250 hours.
- A systematic approach is outlined that includes external visual checks, operational checks, and under-the-hood tests/adjustments.
- The recommended planned maintenance tasks are listed by service manual group and include checks of fluids, filters, lubrication points, and critical fasteners as well as functional tests of vehicle systems.
Clark CGC 70 Forklift Service Repair Manual.pdff7useijdkdmd1
The document provides information on Clark's planned maintenance program including:
- The planned maintenance program consists of basic inspections, adjustments, and lubrications performed every 50-250 hours.
- A systematic approach is outlined that includes external visual checks, operational checks, and under-the-hood tests/adjustments.
- The recommended planned maintenance tasks are listed by service manual group and include checks of fluids, filters, lubrication points, and critical fasteners as well as functional tests of vehicle systems.
Clark CGC 40 Forklift Service Repair Manual.pdff7useijdkdmd1
This document provides information about periodic maintenance schedules for Clark lift trucks. It discusses the terms "periodic service" and "planned maintenance" and how they relate to regularly scheduled maintenance tasks. It provides details on determining appropriate maintenance intervals based on operating conditions. The document includes a service chart that indicates basic maintenance tasks and recommended intervals. It also includes a recommended periodic service schedule chart that lists specific maintenance tasks, the suggested time intervals to perform them, and the service manual group where the task is covered.
Clark C500, Y300S Forklift Service Repair Manual.pdff7useijdkdmd1
This document provides instructions and guidelines for performing planned maintenance (PM) on Clark lift trucks. It outlines the importance of regular inspections and lubrication for long life and trouble-free operation. Technicians should use the provided PM report form as a checklist to document their inspection findings and any needed repairs. Safety precautions are listed, such as disconnecting the battery before working on electrical components. A visual inspection of the entire truck is described, including components like the overhead guard, carriage, forks, and hydraulic and electrical systems. Records of inspections should be kept and repairs authorized by the appropriate personnel.
Clark C500, Y225S Forklift Service Repair Manual.pdff7useijdkdmd1
This document contains a pictorial index and maintenance instructions for Clark forklifts. It is intended only for Clark dealers and lists parts, components, and procedures for repair and maintenance. Copyrighted material and distribution restrictions are noted. Safety practices for maintenance and repair are outlined.
Clark C500, Y180 Forklift Service Repair Manual.pdff7useijdkdmd1
This document contains a pictorial index and maintenance instructions for Clark forklifts. It is intended only for Clark dealers and should not be distributed. The document contains diagrams and descriptions of various forklift components and systems, grouped by number. Safety warnings and instructions for safe maintenance practices are also provided.
Clark C500, Y250S Forklift Service Repair Manual.pdff7useijdkdmd1
This document contains a pictorial index and maintenance instructions for Clark forklifts. It is intended only for Clark dealers and lists parts, components, and procedures for repair and maintenance. Copyrighted material and distribution restrictions are noted. Safety practices for maintenance personnel are outlined.
Clark C500, Y225L Forklift Service Repair Manual.pdff7useijdkdmd1
This document contains a pictorial index and maintenance instructions for Clark forklifts. It is intended only for Clark dealers and not for public distribution. The index covers various systems of the forklift like the engine, transmission, hydraulics, brakes and electrical systems. It provides diagrams and guides technicians through troubleshooting, removing and replacing components, and adjusting various parts of the forklift. Safety warnings and best practices are outlined for technicians to follow when performing maintenance.
Clark C500, Y200 Forklift Service Repair Manual.pdff7useijdkdmd1
This document provides instructions and guidelines for performing planned maintenance (PM) on Clark lift trucks. It outlines the importance of regular inspections and recommends using a PM report form to document the inspections. Safety precautions are described, such as disconnecting the battery before working on electrical components. A visual inspection process is outlined to check for issues like leaks, loose or damaged parts, and worn components. Inspections of specific systems like the uprights, forks, and hydraulic lines are detailed. Record-keeping of inspection results is advised to aid in maintenance planning.
Clark C15-32C LG Forklift Service Repair Manual.pdff7useijdkdmd1
This document provides instructions for safely maintaining a forklift truck. It describes how to safely raise the truck using blocks or jacks, including lifting the front with chains under the upright rails or jacking under designated frame points. Blocking procedures are outlined to securely support lifted components like the upright for maintenance access. Workers are advised to follow manufacturer safety guidelines and use adequately rated equipment for any lifting, jacking or maintenance tasks.
Caterpillar Cat 336F L Excavator (Prefix RKB) Service Repair Manual (RKB00001...f7useijdkdmd1
This document provides instructions for disassembling the travel motor on a 336F L excavator. It describes 27 steps to remove components such as the motor head assembly, springs, seals, relief valves, plugs and port plate. Tools required include a transmission repair stand, lifting eye assembly, driver group, retaining ring pliers and bearing puller group. Safety precautions are provided to release spring forces and contain fluids during disassembly.
How To Fix The Key Not Detected Issue In Mercedes CarsIntegrity Motorcar
Experiencing a "Key Not Detected" problem in your Mercedes? Don’t take it for granted. Go through this presentation to find out the exact nature of the issue you are dealing with. Have your vehicle checked by a certified professional if necessary.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
What Could Cause The Headlights On Your Porsche 911 To Stop WorkingLancer Service
Discover why your Porsche 911 headlights might flicker out unexpectedly. From aging bulbs to electrical gremlins and moisture mishaps, we're delving into the reasons behind the blackout. Stay tuned to illuminate the road ahead and ensure your lights shine bright for safer journeys.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Comprehensive program for Agricultural Finance, the Automotive Sector, and Empowerment . We will define the full scope and provide a detailed two-week plan for identifying strategic partners in each area within Limpopo, including target areas.:
1. Agricultural : Supporting Primary and Secondary Agriculture
• Scope: Provide support solutions to enhance agricultural productivity and sustainability.
• Target Areas: Polokwane, Tzaneen, Thohoyandou, Makhado, and Giyani.
2. Automotive Sector: Partnerships with Mechanics and Panel Beater Shops
• Scope: Develop collaborations with automotive service providers to improve service quality and business operations.
• Target Areas: Polokwane, Lephalale, Mokopane, Phalaborwa, and Bela-Bela.
3. Empowerment : Focusing on Women Empowerment
• Scope: Provide business support support and training to women-owned businesses, promoting economic inclusion.
• Target Areas: Polokwane, Thohoyandou, Musina, Burgersfort, and Louis Trichardt.
We will also prioritize Industrial Economic Zone areas and their priorities.
Sign up on https://profilesmes.online/welcome/
To be eligible:
1. You must have a registered business and operate in Limpopo
2. Generate revenue
3. Sectors : Agriculture ( primary and secondary) and Automative
Women and Youth are encouraged to apply even if you don't fall in those sectors.
Learn why monitoring your Mercedes' Exhaust Back Pressure (EBP) sensor is crucial. Understand its role in engine performance and emission reduction. Discover five warning signs of EBP sensor failure, from loss of power to increased emissions. Take action promptly to avoid costly repairs and maintain your Mercedes' reliability and efficiency.
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
2. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 313D2 EXCAVATOR LCY
Configuration: 313D2 L Excavator LCY00001-UP (MACHINE) POWERED BY C4.4 Engine
Disassembly and Assembly
313D2 Excavator Machine Systems
Media Number -UENR7323-03 Publication Date -01/09/2015 Date Updated -14/12/2017
i06303560
Final Drive and Travel Motor - Disassemble
SMCS - 4050-015; 4351-015
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7573 Link Bracket 3
B 1P-2420 Transmission Repair Stand 1
C 8T-6699 Bolts 2
D
1P-0074 Slide Hammer Puller Gp 1
4C-5666 Threaded Adapter 1
123-6702 Backlash Gauge Gp 1
E 1P-0510 Driver Gp 1
F 8H-0663 Bearing Puller Gp 1
G 1P-1863 Retaining Ring Pliers 1
H 9U-7346 Spanner Wrench As 1
Start By:
a. Remove the final drive and the travel motor. Refer to Disassembly and Assembly Manual ,
"Final Drive and Travel Motor - Remove".
NOTICE
1/23
313D2 L Excavator LCY00001-UP (MACHINE) POWERED BY C4.4 Engine(M007...
2020/5/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat products.
Dispose of all fluids according to local regulations and mandates.
Personal injury can result from hydraulic oil pressure and hot oil.
Hydraulic oil pressure can remain in the hydraulic system after the
engine has been stopped. Serious injury can be caused if this pressure is
not released before any service is done on the hydraulic system.
Make sure all of the work tools have been lowered to the ground, and
the oil is cool before removing any components or lines. Remove the oil
filler cap only when the engine is stopped, and the filler cap is cool
enough to touch with your bare hand.
1. Thoroughly clean the outside of the final drive and travel motor prior to disassembly.
2. Remove the sprocket from the final drive and the travel motor. The weight of the sprocket is
approximately 39 kg (85 lb).
3. Mark the alignment of the final drive and travel motor for reassembly purposes. The parts
must be reinstalled in the original locations.
2/23
313D2 L Excavator LCY00001-UP (MACHINE) POWERED BY C4.4 Engine(M007...
2020/5/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. Illustration 1 g00940682
4. Use Tooling (A) and a suitable lifting device to position the final drive and the travel motor
onto Tooling (B). The combined weight of the final drive and travel motor is approximately
170 kg (375 lb).
5. Drain the oil from the final drive into a suitable container for storage or for disposal. Refer
to Operation and Maintenance Manual, "Capacities (Refill)" for the capacity of the final
drive.
6. Remove fittings (1). Remove fittings (2) from traction control valve (3).
7. Remove nine bolts (4) that secure traction control valve (3) to the final drive.
8. Use two persons to remove traction control valve (3) from the final drive. The weight of
travel brake valve (3) is approximately 27 kg (60 lb).
3/23
313D2 L Excavator LCY00001-UP (MACHINE) POWERED BY C4.4 Engine(M007...
2020/5/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. Illustration 2 g00940716
9. Remove valve plate (5) and O-ring seal (6).
Illustration 3 g01405139
10. Use Tooling (D) to remove bearing (7).
Disassembly of the Counterbalance Valve
Illustration 4 g01405725
4/23
313D2 L Excavator LCY00001-UP (MACHINE) POWERED BY C4.4 Engine(M007...
2020/5/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. Illustration 5 g01405227
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
1. Position the counterbalance valve, as shown. Remove plug (8) and adapter (9).
2. Remove spring (10) and spool (11).
Illustration 6 g01405232
5/23
313D2 L Excavator LCY00001-UP (MACHINE) POWERED BY C4.4 Engine(M007...
2020/5/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. 3. Remove relief valve assemblies (12).
Illustration 7 g01405243
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
4. Remove seat (13). Seat (13) is pressed onto valve (17). Use new parts if seat (13) or valve
(17) is damaged. Do not disassemble these components. Make sure that you reuse the other
component.
5. Remove backup ring (14) and O-ring seal (15).
6. Remove O-ring seal (22).
7. Remove nut (20).
8. Remove screw (27).
9. Remove stopper (26). Remove backup ring (19) and O-ring seal (18) from stopper (19).
10. Remove valve (21), piston (25), and spring (16) from the housing.
11. Remove backup ring (23) and O-ring seal (24) from piston (25).
6/23
313D2 L Excavator LCY00001-UP (MACHINE) POWERED BY C4.4 Engine(M007...
2020/5/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. Illustration 8 g01405284
Illustration 9 g01405299
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
12. Remove covers (28) and the O-ring seals.
13. Remove springs (29), guides (30), and spool assembly (31).
7/23
313D2 L Excavator LCY00001-UP (MACHINE) POWERED BY C4.4 Engine(M007...
2020/5/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. Illustration 10 g01405345
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
14. Remove valve (32), spring (33), and ball (34) from one end of spool (35). Repeat for the
other end of spool (35).
Illustration 11 g01405633
8/23
313D2 L Excavator LCY00001-UP (MACHINE) POWERED BY C4.4 Engine(M007...
2020/5/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
15. Remove plug (36), spring (38), and piston (39) from both sides of the housing assembly.
16. Remove O-ring seal (37) from each plug (36).
Note: Remove the remaining allen head bolts from the housing assembly for cleaning
purposes, if necessary. Each allen head bolt has an O-ring seal. Check the O-ring seal for
wear or for damage. Replace the O-ring seal, if necessary.
Disassembly of the Travel Motor
Illustration 12 g01405794
1. Remove O-ring seal (40) and springs (41).
9/23
313D2 L Excavator LCY00001-UP (MACHINE) POWERED BY C4.4 Engine(M007...
2020/5/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. Illustration 13 g01405828
2. Install Tooling (C) onto piston assembly (42). Use Tooling (C) and a suitable prybar to
remove piston assembly (42) from body (43).
Illustration 14 g01405855
3. Remove O-ring seals (45) and (46) from piston assembly (42). Remove backup rings (44)
and (47) from piston assembly (42).
10/23
313D2 L Excavator LCY00001-UP (MACHINE) POWERED BY C4.4 Engine(M0...
2020/5/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. Illustration 15 g01405867
4. Use suitable drivers or a suitable lever to remove guide assembly (48).
Illustration 16 g01405885
5. Remove O-ring seal (49) and backup ring (50) from guide assembly (48).
11/23
313D2 L Excavator LCY00001-UP (MACHINE) POWERED BY C4.4 Engine(M0...
2020/5/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. Illustration 17 g01406117
6. Remove four separator plates (51) and four friction plates (52). Note the alternating order of
separator plates (51) and friction plates (52) for assembly purposes.
Note: Do not allow the components of barrel assembly (53) to come apart while you
remove barrel assembly (53). The components of barrel assembly (53) must be reinstalled
into the original positions.
Note: Oil will drain from the final drive. Place a suitable container under the final drive for
storage or disposal. Refer to Operation and Maintenance Manual, "Capacities (Refill)" for
the fluid capacity of the final drive.
7. Position the final drive horizontally.
8. Remove barrel assembly (53).
12/23
313D2 L Excavator LCY00001-UP (MACHINE) POWERED BY C4.4 Engine(M0...
2020/5/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. Illustration 18 g01406180
Note: Mark the component locations for assembly purposes before you disassemble barrel
assembly (53).
9. Remove piston assemblies (54) and retainer (55) from barrel assembly (53).
Illustration 19 g01406210
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
10. Remove retainer (56), spacer (57), and springs (58) from barrel assembly (53).
13/23
313D2 L Excavator LCY00001-UP (MACHINE) POWERED BY C4.4 Engine(M0...
2020/5/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. Illustration 20 g01406263
11. Put location marks on cam plate (59) for assembly purposes. Make sure that the thick end of
cam plate (59) is adjacent to the opening that is across body (43). Remove cam plate (59).
Illustration 21 g01406329
Illustration 22 g01406338
14/23
313D2 L Excavator LCY00001-UP (MACHINE) POWERED BY C4.4 Engine(M0...
2020/5/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
12. Remove piston (60) and spring (62).
13. Remove key (61).
Disassembly of the Final Drive
Illustration 23 g01406376
1. Use a suitable lifting device to position the final drive on Tooling (B), as shown. The weight
of the final drive is approximately 200 kg (441 lb).
2. Remove plugs (63). Remove the O-ring seals from plugs (63). Check the O-ring seals for
wear or for damage. Replace the O-ring seals, if necessary.
3. Remove bolts (65). Remove cover (64).
15/23
313D2 L Excavator LCY00001-UP (MACHINE) POWERED BY C4.4 Engine(M0...
2020/5/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. Illustration 24 g01406386
4. Raise the temperature of bolts (66) in order to loosen the thread sealant.
5. Remove bolts (66) and plate (67).
Illustration 25 g01406397
6. Remove sun gear (68).
16/23
313D2 L Excavator LCY00001-UP (MACHINE) POWERED BY C4.4 Engine(M0...
2020/5/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. Illustration 26 g01406400
7. Attach Tooling (A) and a suitable lifting device to carrier assembly (69). Remove carrier
assembly (69), planetary gear assembly (70), and bearing assembly (71) as a unit.
Illustration 27 g01406789
8. Remove planetary gear (70) and bearing assembly (71) from carrier assembly (69). Remove
the remaining planetary gears (70) and bearings (71).
Illustration 28 g01406822
9. Remove sun gear (72).
17/23
313D2 L Excavator LCY00001-UP (MACHINE) POWERED BY C4.4 Engine(M0...
2020/5/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
19. 10. Raise the temperature of bolts (73) in order to loosen the thread sealant. Remove bolts (73).
Remove plate (74).
Illustration 29 g01406850
11. Remove retaining ring (75) from sun gear (72). Check retaining ring (75) for wear or for
damage. Replace retaining ring (75), if necessary.
Illustration 30 g01406853
12. Remove planetary gear (76).
18/23
313D2 L Excavator LCY00001-UP (MACHINE) POWERED BY C4.4 Engine(M0...
2020/5/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
20. Illustration 31 g01406875
13. Remove bearing (77), race (78), and thrust washer (79).
14. Repeat Steps 12 and 13 in order to remove the remaining planetary gear assemblies.
Illustration 32 g01406882
15. Remove bolt (80) and plate (81).
19/23
313D2 L Excavator LCY00001-UP (MACHINE) POWERED BY C4.4 Engine(M0...
2020/5/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
21. Illustration 33 g01406885
Illustration 34 g01406886
16. Use Tooling (H) to remove nut (82).
Illustration 35 g01406906
17. Install Tooling (A) and a suitable lifting device to housing (83). The weight of housing (83)
is approximately 35 kg (77 lb).
18. Remove housing (83) from body assembly (84).
20/23
313D2 L Excavator LCY00001-UP (MACHINE) POWERED BY C4.4 Engine(M0...
2020/5/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
22. Illustration 36 g01406912
19. Remove Duo-Cone Seal Gp seal (85) from the body assembly. Remove the Duo-Cone Seal
Gp seal from the housing.
Illustration 37 g01407100
20. Remove both bearings (86) from housing (83).
21/23
313D2 L Excavator LCY00001-UP (MACHINE) POWERED BY C4.4 Engine(M0...
2020/5/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
23. Illustration 38 g01407089
21. Remove both bearings (87) from housing (83).
Illustration 39 g01407115
22. Position body assembly (84) horizontally. Remove shaft assembly (88), the bearing, and the
retaining ring.
22/23
313D2 L Excavator LCY00001-UP (MACHINE) POWERED BY C4.4 Engine(M0...
2020/5/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
24. Illustration 40 g01407144
23. Use Tooling (G) to remove retaining ring (89) from shaft assembly (88).
Illustration 41 g01407161
24. Use Tooling (E), Tooling (F), and a suitable press to remove bearing (90).
Illustration 42 g01407166
25. Remove lip seal (91) from the body assembly.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sat May 16 23:26:11 UTC+0800 2020
23/23
313D2 L Excavator LCY00001-UP (MACHINE) POWERED BY C4.4 Engine(M0...
2020/5/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
25. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 313D2 EXCAVATOR LCY
Configuration: 313D2 L Excavator LCY00001-UP (MACHINE) POWERED BY C4.4 Engine
Disassembly and Assembly
313D2 Excavator Machine Systems
Media Number -UENR7323-03 Publication Date -01/09/2015 Date Updated -14/12/2017
i07219742
Final Drive and Travel Motor - Disassemble
SMCS - 4050-015; 4351-015
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 422-5474 M16x2x24 mm Lifting Eye Assembly 2
B 1P-2420 Transmission Repair Stand 1
C 8H-0663 Bearing Puller Assembly 1
D 422-5473 M12x1.75x21 mm Lifting Eye Assembly 2
E 422-5472 M10x1.5x16 mm Lifting Eye Assembly 2
F 1U-9895 Crossblock 1
Start By:
a. Remove the final drive and the travel motor assembly.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
1/22
313D2 L Excavator LCY00001-UP (MACHINE) POWERED BY C4.4 Engine(M007...
2020/5/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
26. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
27. Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat®
products.
Dispose of all fluids according to local regulations and mandates.
Personal injury can result from hydraulic oil pressure and hot oil.
Hydraulic oil pressure can remain in the hydraulic system after the
engine has been stopped. Serious injury can be caused if this pressure is
not released before any service is done on the hydraulic system.
Make sure all of the work tools have been lowered to the ground, and
the oil is cool before removing any components or lines. Remove the oil
filler cap only when the engine is stopped, and the filler cap is cool
enough to touch with your bare hand.
1. Thoroughly clean the outside of the final drive and travel motor prior to disassembly.
2. Remove the sprocket from the final drive and the travel motor assembly. The weight of the
sprocket is approximately 39 kg (85 lb).
3. Mark the alignment of the final drive and travel motor for reassembly purposes. The parts
must be reinstalled in the original locations.
Illustration 1 g06256385
4. Use Tooling (A) and a suitable lifting device to position final drive assembly (1) onto
Tooling (B). The weight of final drive assembly (1) is approximately 163 kg (360 lb).
2/22
313D2 L Excavator LCY00001-UP (MACHINE) POWERED BY C4.4 Engine(M007...
2020/5/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
28. 5. Drain the oil from final drive assembly (1) into a suitable container for storage or for
disposal. Refer to Operation and Maintenance Manual, "Capacities (Refill)" for the capacity
of the final drive.
Illustration 2 g06256798
6. Remove plug (2), plugs (3), and the O-ring seals.
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
Illustration 3 g06256843
3/22
313D2 L Excavator LCY00001-UP (MACHINE) POWERED BY C4.4 Engine(M007...
2020/5/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
29. Illustration 4 g06256845
7. Remove plugs (4) and the O-ring seals.
8. Remove plug (5), spring (7), valve (6), and the O-ring seals.
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
Illustration 5 g06256847
4/22
313D2 L Excavator LCY00001-UP (MACHINE) POWERED BY C4.4 Engine(M007...
2020/5/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...