The document provides disassembly instructions for the final drive, travel motor, and various other components of an excavator model 313D2. It lists over 30 detailed steps to disassemble parts like the final drive, counterbalance valve, travel motor, barrel assembly, and more. Safety warnings are provided throughout to warn of hazards like parts propelled by springs and releasing hydraulic pressure. Required tools are listed at the beginning, including link brackets, a transmission repair stand, bolts, pullers, and other specialized tools.
The document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of an excavator model 313D2. It lists over 30 detailed steps to disassemble components like the final drive housing, travel motor barrel assembly, piston assemblies, gears, seals and other parts. Tools required include link brackets, a transmission repair stand, bolts, pullers, retaining ring pliers and other specialized tools. Safety notices are provided to properly release pressures and contain fluids.
Caterpillar cat 315 f l excavator (prefix tdy) service repair manual (tdy0000...fjskekdmjekm
This document provides disassembly instructions for the final drive and travel motor of a 315F LCR excavator. It outlines 14 steps to disassemble the final drive which includes removing covers, gears, bearings, and other components. It also details 23 steps to disassemble the travel motor, counterbalance valve, and other internal parts. Safety precautions are provided throughout to warn of potential hazards like released spring forces during disassembly.
Caterpillar cat 312 d2 l excavator (prefix mpp) service repair manual (mpp000...fjjsekmmm
This document provides instructions for disassembling various components of an excavator, including the final drive, travel motor, counterbalance valve, and travel motor. It lists the required tools and outlines 16 steps to disassemble parts like the traction control valve, bearing, relief valve assemblies, piston assemblies, springs, and barrel assembly. Safety notices are included to warn of potential injuries from parts propelled by springs or pressurized hydraulic fluid.
Caterpillar cat 312 d excavator (prefix jbc) service repair manual (jbc00001 ...fksjksmmde
This document provides instructions for disassembling the final drive, travel motor, and counterbalance valve of a 312D or 312D L excavator. It lists the required tools and gives step-by-step procedures for removing components such as sprockets, valves, gears, plates, seals, and other parts. Safety notices are included to warn of potential injuries from parts propelled by springs or pressurized fluids. Detailed illustrations supplement the text to show how to take each component apart.
Caterpillar cat 312 d excavator (prefix dlp) service repair manual (dlp00001 ...fksjksmmde
This document provides instructions for disassembling various components of a 312D excavator, including the final drive, travel motor, counterbalance valve, and travel motor. It lists the required tools and outlines 16 detailed steps to disassemble parts like the traction control valve, barrel assembly, piston assemblies, springs and seals. Safety notices are included to warn of potential injuries from parts or fluids.
This document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 312D2 GC excavator. It lists the required tools and parts and provides step-by-step instructions and illustrations for disassembling each component. Personal safety notices are included throughout to warn technicians of potential hazards like parts propelled by springs or releasing hydraulic pressure. The document is intended to guide technicians in properly disassembling these systems for repair or replacement of parts.
This document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 313D2 excavator. It lists the required tools and outlines 16 steps to disassemble the components, including draining fluids, removing covers, plates, seals, springs, pistons, and housing pieces. Safety notices are included to warn of potential injuries from parts or released pressures.
This document provides instructions for disassembling various components of a 313D2 excavator, including the final drive, travel motor, counterbalance valve, and barrel assembly. It lists required tools and outlines multi-step procedures involving draining fluids, removing fittings and fasteners, using pullers to remove bearings, and noting part locations and orientations for reassembly. Safety notices are included to warn of potential injuries from pressurized fluids, heavy lifting, and released spring forces.
The document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of an excavator model 313D2. It lists over 30 detailed steps to disassemble components like the final drive housing, travel motor barrel assembly, piston assemblies, gears, seals and other parts. Tools required include link brackets, a transmission repair stand, bolts, pullers, retaining ring pliers and other specialized tools. Safety notices are provided to properly release pressures and contain fluids.
Caterpillar cat 315 f l excavator (prefix tdy) service repair manual (tdy0000...fjskekdmjekm
This document provides disassembly instructions for the final drive and travel motor of a 315F LCR excavator. It outlines 14 steps to disassemble the final drive which includes removing covers, gears, bearings, and other components. It also details 23 steps to disassemble the travel motor, counterbalance valve, and other internal parts. Safety precautions are provided throughout to warn of potential hazards like released spring forces during disassembly.
Caterpillar cat 312 d2 l excavator (prefix mpp) service repair manual (mpp000...fjjsekmmm
This document provides instructions for disassembling various components of an excavator, including the final drive, travel motor, counterbalance valve, and travel motor. It lists the required tools and outlines 16 steps to disassemble parts like the traction control valve, bearing, relief valve assemblies, piston assemblies, springs, and barrel assembly. Safety notices are included to warn of potential injuries from parts propelled by springs or pressurized hydraulic fluid.
Caterpillar cat 312 d excavator (prefix jbc) service repair manual (jbc00001 ...fksjksmmde
This document provides instructions for disassembling the final drive, travel motor, and counterbalance valve of a 312D or 312D L excavator. It lists the required tools and gives step-by-step procedures for removing components such as sprockets, valves, gears, plates, seals, and other parts. Safety notices are included to warn of potential injuries from parts propelled by springs or pressurized fluids. Detailed illustrations supplement the text to show how to take each component apart.
Caterpillar cat 312 d excavator (prefix dlp) service repair manual (dlp00001 ...fksjksmmde
This document provides instructions for disassembling various components of a 312D excavator, including the final drive, travel motor, counterbalance valve, and travel motor. It lists the required tools and outlines 16 detailed steps to disassemble parts like the traction control valve, barrel assembly, piston assemblies, springs and seals. Safety notices are included to warn of potential injuries from parts or fluids.
This document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 312D2 GC excavator. It lists the required tools and parts and provides step-by-step instructions and illustrations for disassembling each component. Personal safety notices are included throughout to warn technicians of potential hazards like parts propelled by springs or releasing hydraulic pressure. The document is intended to guide technicians in properly disassembling these systems for repair or replacement of parts.
This document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 313D2 excavator. It lists the required tools and outlines 16 steps to disassemble the components, including draining fluids, removing covers, plates, seals, springs, pistons, and housing pieces. Safety notices are included to warn of potential injuries from parts or released pressures.
This document provides instructions for disassembling various components of a 313D2 excavator, including the final drive, travel motor, counterbalance valve, and barrel assembly. It lists required tools and outlines multi-step procedures involving draining fluids, removing fittings and fasteners, using pullers to remove bearings, and noting part locations and orientations for reassembly. Safety notices are included to warn of potential injuries from pressurized fluids, heavy lifting, and released spring forces.
This document provides disassembly instructions for the final drive, travel motor, and other components of excavator models 312D2 and 312D2 L. It outlines 16 steps to disassemble the final drive which include draining fluids, removing fittings and valves, and using various tools. It then details 14 steps to disassemble the travel motor which involve removing seals, pistons, plates and other parts. Safety notices are included throughout to warn of potential injuries from springs, fluids and heavy components.
The document provides disassembly instructions for the final drive, travel motor, and other components of a 313D2 excavator. It lists over 30 detailed steps to disassemble parts like the final drive, counterbalance valve, travel motor, and planetary gear assemblies. Safety notices are included throughout to warn of potential injuries from parts under spring tension or residual fluid pressure. Dismantling requires specialty tools and careful tracking of part locations for reassembly.
Caterpillar cat 313 f lgc excavator (prefix hdk) service repair manual (hdk00...fjkskefksmeme
1) The document provides disassembly instructions for components of a 313F LGC excavator, including the final drive, travel motor, and counterbalance valve.
2) It lists required tools and safety precautions and provides a step-by-step process to remove each part, noting identification numbers where applicable.
3) Detailed illustrations accompany each step to show how to remove components like sprockets, valves, springs, gears, seals and other parts while taking care to mark locations for reassembly.
The document provides disassembly instructions for the final drive, travel motor, and other components of a 313D2 excavator. It lists over 30 detailed steps to disassemble parts like the final drive, counterbalance valve, travel motor, and planetary gear assemblies. Safety notices are included throughout to warn of hazards like parts propelled by springs, hydraulic pressure, and heavy component weights. Required tools are listed in a table at the beginning.
Caterpillar cat 314 d lcr excavator (prefix byj) service repair manual (byj00...soeldksejdksem
This document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 314D CR and 314D LCR excavator. It lists 17 required tools and gives detailed step-by-step instructions to disassemble each component. Some key steps include draining fluids, removing covers and plates, using pullers to remove bearings, and noting part locations for reassembly. Safety notices are provided regarding releasing pressures and springs.
Caterpillar cat 314 c lcr excavator (prefix kja) service repair manual (kja00...jfdskekdmme
This document provides disassembly instructions for the final drive, travel motor, and other components of a 314C excavator. It lists required tools and outlines over 30 steps to disassemble parts like the final drive, travel motor, counterbalance valve, and planetary gear assemblies. Safety notices are included throughout to warn of hazards like released spring forces and hot or pressurized fluids.
Caterpillar cat 314 c lcr excavator (prefix pca) service repair manual (pca00...jfdskekdmme
This document provides disassembly instructions for excavator models 314C, 314C CR, and 314C LCR. It describes how to disassemble components of the final drive, travel motor, counterbalance valve, and other systems. The instructions are detailed, listing each part and step in the disassembly process. Required tools are provided at the beginning. Safety notices are included throughout to warn of hazards like stored energy in springs.
Caterpillar cat 349 f l excavator (prefix hlb) service repair manual (hlb0000...fjsjjekdkme
This document provides instructions for disassembling and assembling the travel motor on 349F and 349F L excavators. It begins by listing the required tools and safety precautions. The disassembly process is then described in 32 steps and illustrated with diagrams, removing components like the motor head assembly, piston assembly, barrel assembly, swashplate, and shaft assembly. The assembly section provides specifications, lubrication and torque requirements for components, and illustrated assembly steps in reverse order.
Caterpillar cat 345 c excavator (prefix dhp) service repair manual (dhp00001 ...fjsekdmmeed
The document provides instructions for disassembling and assembling a travel motor. It begins with removing external components like the displacement change valve and head. Internal components like the brake piston, disks, and rotating group are then removed. Individual parts in the rotating group like the piston assemblies and barrel are also taken apart. Precise identification and reinstallation of parts is emphasized. The assembly section provides instructions for reinstalling components in reverse order and ensuring proper placement and torque of parts.
Caterpillar cat 311 f lrr excavator (prefix jft) service repair manual (jft00...fjskekdmjekm
This document provides disassembly instructions for the final drive, travel motor, and other components of a 311F LRR excavator. It lists over 30 detailed steps to disassemble the final drive, travel motor, counterbalance valve, and other systems. Tools and safety precautions are also provided to properly disassemble components like springs that could cause injury if not handled correctly. The goal is to disassemble the major components into their individual parts to allow for cleaning, inspection, and replacement of any worn parts prior to reassembly.
The document provides instructions for disassembling and assembling a travel motor. It lists 31 steps for disassembly, removing components like the head, plates, seals, pistons, and housing. It then lists 13 steps for assembly, installing components like seals, spacers, pistons, and housings in reverse order of disassembly. Tools required are listed in a table. Cautions are provided about cleaning parts and preventing contamination of hydraulic systems.
Caterpillar cat 313 d2 l excavator (prefix lcy) service repair manual (lcy000...fjkskefksmeme
The document provides disassembly instructions for a 313D2 excavator final drive and travel motor. It lists required tools and outlines 23 steps to disassemble the components, including removing covers, plates, gears, seals, pistons, springs and other parts. Personal injury warnings are provided regarding hydraulic pressure, released spring forces, and lifting heavy components.
The document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of an excavator model 313D2. It lists required tools and gives step-by-step instructions to remove components such as sprockets, valves, pistons, gears, seals and plates. Safety warnings are provided to release pressures and contain fluids. Dismantling involves removing covers, draining oil, loosening bolts, and using pullers and pry bars to separate interconnected parts in a specified sequence.
This document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 313D2 excavator. It lists required tools and outlines over 30 steps to disassemble components such as sprockets, valves, pistons, gears, seals, and plates. Safety notices are included to warn of risks like fluids, pressures, and released springs during disassembly.
This document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 313D2 excavator. It lists required tools and outlines over 30 steps to disassemble components such as sprockets, valves, pistons, gears, seals, and plates. Safety notices are included to warn of risks like fluids, pressures, and released springs during disassembly.
Caterpillar Cat 315F L and 315F LCR Excavator (Prefix TDY) Service Repair Man...ze6074xunong
This document provides instructions for disassembling various components of an excavator final drive and travel motor system. It outlines 17 specific disassembly steps, including draining fluids, removing covers, valves, plates, seals, springs, pistons, and other parts. Proper safety precautions and required tools are noted. The goal is to disassemble the components for cleaning or replacement of worn parts prior to reassembly.
Caterpillar Cat 315F L and 315F LCR Excavator (Prefix TDY) Service Repair Man...f8usejkdmmd8i
This document provides instructions for disassembling various components of an excavator final drive and travel motor system. It outlines 17 specific disassembly steps, including draining fluids, removing covers, valves, springs, seals, and other parts. Special safety notices are included to warn of potential hazards like released spring forces or pressurized hydraulic systems. Detailed illustrations accompany each step to show how to properly disassemble the components.
Caterpillar Cat 315F L and 315F LCR Excavator (Prefix TDY) Service Repair Man...yu5676962
This document provides disassembly instructions for the final drive and travel motor of a 315F LCR excavator. It outlines over 30 steps to disassemble both components, including removing covers, plates, gears, seals, valves, pistons, and other internal parts. Safety notices are included throughout to warn of potential hazards like released spring forces or pressurized fluids. Detailed illustrations accompany each step to show how to position the components and which fasteners, tools and ordering to use for complete disassembly of the final drive and travel motor systems.
Caterpillar Cat 315F L and 315F LCR Excavator (Prefix TDY) Service Repair Man...gongfuao7509
This document provides disassembly instructions for the final drive and travel motor of a 315F LCR excavator. It outlines 14 steps to disassemble the final drive which includes removing covers, gears, bearings, and other components. It also details 23 steps to disassemble the travel motor, counterbalance valve, and other internal parts. Safety notices are included throughout to warn of potential hazards like released spring forces during disassembly. The document lists required tools and provides illustrations for each step.
Caterpillar Cat 315F L and 315F LCR Excavator (Prefix TDY) Service Repair Man...tengtui535
This document provides disassembly instructions for the final drive and travel motor of a 315F LCR excavator. It outlines 14 steps to disassemble the final drive which includes removing covers, gears, bearings, and other components. It also details 23 steps to disassemble the travel motor, counterbalance valve, and other internal parts. Safety notices are included throughout to warn of potential hazards like released spring forces during disassembly.
Caterpillar Cat 315F L and 315F LCR Excavator (Prefix TDY) Service Repair Man...f8seodkdmdmed3
This document provides instructions for disassembling various components of an excavator final drive and travel motor system. It outlines 17 specific disassembly steps, including draining fluids, removing covers, valves, springs, seals, and other parts. Special safety notices are included to warn of potential hazards like released spring forces or pressurized hydraulic systems. Detailed illustrations accompany each step to show how to position the components and which fasteners, seals, and other pieces to remove.
Caterpillar cat 315 f lcr excavator (prefix tdy) service repair manual (tdy00...fjskekdmjekm
This document provides instructions for disassembling various components of an excavator final drive and travel motor system. It outlines 17 specific disassembly steps, including draining fluids, removing covers, valves, plates, seals, springs, pistons, and other parts. Special safety notices are included to warn of potential hazards like released spring forces or pressurized hydraulic fluid. Dismantling the system requires various tools and involves lifting heavy parts that must be properly supported.
This document provides disassembly instructions for the final drive, travel motor, and other components of excavator models 312D2 and 312D2 L. It outlines 16 steps to disassemble the final drive which include draining fluids, removing fittings and valves, and using various tools. It then details 14 steps to disassemble the travel motor which involve removing seals, pistons, plates and other parts. Safety notices are included throughout to warn of potential injuries from springs, fluids and heavy components.
The document provides disassembly instructions for the final drive, travel motor, and other components of a 313D2 excavator. It lists over 30 detailed steps to disassemble parts like the final drive, counterbalance valve, travel motor, and planetary gear assemblies. Safety notices are included throughout to warn of potential injuries from parts under spring tension or residual fluid pressure. Dismantling requires specialty tools and careful tracking of part locations for reassembly.
Caterpillar cat 313 f lgc excavator (prefix hdk) service repair manual (hdk00...fjkskefksmeme
1) The document provides disassembly instructions for components of a 313F LGC excavator, including the final drive, travel motor, and counterbalance valve.
2) It lists required tools and safety precautions and provides a step-by-step process to remove each part, noting identification numbers where applicable.
3) Detailed illustrations accompany each step to show how to remove components like sprockets, valves, springs, gears, seals and other parts while taking care to mark locations for reassembly.
The document provides disassembly instructions for the final drive, travel motor, and other components of a 313D2 excavator. It lists over 30 detailed steps to disassemble parts like the final drive, counterbalance valve, travel motor, and planetary gear assemblies. Safety notices are included throughout to warn of hazards like parts propelled by springs, hydraulic pressure, and heavy component weights. Required tools are listed in a table at the beginning.
Caterpillar cat 314 d lcr excavator (prefix byj) service repair manual (byj00...soeldksejdksem
This document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 314D CR and 314D LCR excavator. It lists 17 required tools and gives detailed step-by-step instructions to disassemble each component. Some key steps include draining fluids, removing covers and plates, using pullers to remove bearings, and noting part locations for reassembly. Safety notices are provided regarding releasing pressures and springs.
Caterpillar cat 314 c lcr excavator (prefix kja) service repair manual (kja00...jfdskekdmme
This document provides disassembly instructions for the final drive, travel motor, and other components of a 314C excavator. It lists required tools and outlines over 30 steps to disassemble parts like the final drive, travel motor, counterbalance valve, and planetary gear assemblies. Safety notices are included throughout to warn of hazards like released spring forces and hot or pressurized fluids.
Caterpillar cat 314 c lcr excavator (prefix pca) service repair manual (pca00...jfdskekdmme
This document provides disassembly instructions for excavator models 314C, 314C CR, and 314C LCR. It describes how to disassemble components of the final drive, travel motor, counterbalance valve, and other systems. The instructions are detailed, listing each part and step in the disassembly process. Required tools are provided at the beginning. Safety notices are included throughout to warn of hazards like stored energy in springs.
Caterpillar cat 349 f l excavator (prefix hlb) service repair manual (hlb0000...fjsjjekdkme
This document provides instructions for disassembling and assembling the travel motor on 349F and 349F L excavators. It begins by listing the required tools and safety precautions. The disassembly process is then described in 32 steps and illustrated with diagrams, removing components like the motor head assembly, piston assembly, barrel assembly, swashplate, and shaft assembly. The assembly section provides specifications, lubrication and torque requirements for components, and illustrated assembly steps in reverse order.
Caterpillar cat 345 c excavator (prefix dhp) service repair manual (dhp00001 ...fjsekdmmeed
The document provides instructions for disassembling and assembling a travel motor. It begins with removing external components like the displacement change valve and head. Internal components like the brake piston, disks, and rotating group are then removed. Individual parts in the rotating group like the piston assemblies and barrel are also taken apart. Precise identification and reinstallation of parts is emphasized. The assembly section provides instructions for reinstalling components in reverse order and ensuring proper placement and torque of parts.
Caterpillar cat 311 f lrr excavator (prefix jft) service repair manual (jft00...fjskekdmjekm
This document provides disassembly instructions for the final drive, travel motor, and other components of a 311F LRR excavator. It lists over 30 detailed steps to disassemble the final drive, travel motor, counterbalance valve, and other systems. Tools and safety precautions are also provided to properly disassemble components like springs that could cause injury if not handled correctly. The goal is to disassemble the major components into their individual parts to allow for cleaning, inspection, and replacement of any worn parts prior to reassembly.
The document provides instructions for disassembling and assembling a travel motor. It lists 31 steps for disassembly, removing components like the head, plates, seals, pistons, and housing. It then lists 13 steps for assembly, installing components like seals, spacers, pistons, and housings in reverse order of disassembly. Tools required are listed in a table. Cautions are provided about cleaning parts and preventing contamination of hydraulic systems.
Caterpillar cat 313 d2 l excavator (prefix lcy) service repair manual (lcy000...fjkskefksmeme
The document provides disassembly instructions for a 313D2 excavator final drive and travel motor. It lists required tools and outlines 23 steps to disassemble the components, including removing covers, plates, gears, seals, pistons, springs and other parts. Personal injury warnings are provided regarding hydraulic pressure, released spring forces, and lifting heavy components.
The document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of an excavator model 313D2. It lists required tools and gives step-by-step instructions to remove components such as sprockets, valves, pistons, gears, seals and plates. Safety warnings are provided to release pressures and contain fluids. Dismantling involves removing covers, draining oil, loosening bolts, and using pullers and pry bars to separate interconnected parts in a specified sequence.
This document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 313D2 excavator. It lists required tools and outlines over 30 steps to disassemble components such as sprockets, valves, pistons, gears, seals, and plates. Safety notices are included to warn of risks like fluids, pressures, and released springs during disassembly.
This document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 313D2 excavator. It lists required tools and outlines over 30 steps to disassemble components such as sprockets, valves, pistons, gears, seals, and plates. Safety notices are included to warn of risks like fluids, pressures, and released springs during disassembly.
Caterpillar Cat 315F L and 315F LCR Excavator (Prefix TDY) Service Repair Man...ze6074xunong
This document provides instructions for disassembling various components of an excavator final drive and travel motor system. It outlines 17 specific disassembly steps, including draining fluids, removing covers, valves, plates, seals, springs, pistons, and other parts. Proper safety precautions and required tools are noted. The goal is to disassemble the components for cleaning or replacement of worn parts prior to reassembly.
Caterpillar Cat 315F L and 315F LCR Excavator (Prefix TDY) Service Repair Man...f8usejkdmmd8i
This document provides instructions for disassembling various components of an excavator final drive and travel motor system. It outlines 17 specific disassembly steps, including draining fluids, removing covers, valves, springs, seals, and other parts. Special safety notices are included to warn of potential hazards like released spring forces or pressurized hydraulic systems. Detailed illustrations accompany each step to show how to properly disassemble the components.
Caterpillar Cat 315F L and 315F LCR Excavator (Prefix TDY) Service Repair Man...yu5676962
This document provides disassembly instructions for the final drive and travel motor of a 315F LCR excavator. It outlines over 30 steps to disassemble both components, including removing covers, plates, gears, seals, valves, pistons, and other internal parts. Safety notices are included throughout to warn of potential hazards like released spring forces or pressurized fluids. Detailed illustrations accompany each step to show how to position the components and which fasteners, tools and ordering to use for complete disassembly of the final drive and travel motor systems.
Caterpillar Cat 315F L and 315F LCR Excavator (Prefix TDY) Service Repair Man...gongfuao7509
This document provides disassembly instructions for the final drive and travel motor of a 315F LCR excavator. It outlines 14 steps to disassemble the final drive which includes removing covers, gears, bearings, and other components. It also details 23 steps to disassemble the travel motor, counterbalance valve, and other internal parts. Safety notices are included throughout to warn of potential hazards like released spring forces during disassembly. The document lists required tools and provides illustrations for each step.
Caterpillar Cat 315F L and 315F LCR Excavator (Prefix TDY) Service Repair Man...tengtui535
This document provides disassembly instructions for the final drive and travel motor of a 315F LCR excavator. It outlines 14 steps to disassemble the final drive which includes removing covers, gears, bearings, and other components. It also details 23 steps to disassemble the travel motor, counterbalance valve, and other internal parts. Safety notices are included throughout to warn of potential hazards like released spring forces during disassembly.
Caterpillar Cat 315F L and 315F LCR Excavator (Prefix TDY) Service Repair Man...f8seodkdmdmed3
This document provides instructions for disassembling various components of an excavator final drive and travel motor system. It outlines 17 specific disassembly steps, including draining fluids, removing covers, valves, springs, seals, and other parts. Special safety notices are included to warn of potential hazards like released spring forces or pressurized hydraulic systems. Detailed illustrations accompany each step to show how to position the components and which fasteners, seals, and other pieces to remove.
Caterpillar cat 315 f lcr excavator (prefix tdy) service repair manual (tdy00...fjskekdmjekm
This document provides instructions for disassembling various components of an excavator final drive and travel motor system. It outlines 17 specific disassembly steps, including draining fluids, removing covers, valves, plates, seals, springs, pistons, and other parts. Special safety notices are included to warn of potential hazards like released spring forces or pressurized hydraulic fluid. Dismantling the system requires various tools and involves lifting heavy parts that must be properly supported.
Caterpillar cat 315 f l excavator (prefix tdy) service repair manual (tdy0000...f9oseikkdks
This document provides disassembly instructions for the final drive and travel motor of a 315F LCR excavator. It describes removing over 50 individual parts in multiple steps, including draining fluids, removing covers, plates, gears, seals, valves, pistons, springs and other components. Safety notices are included throughout to warn of potential injuries from parts propelled by springs or pressurized hydraulic fluids. Detailed illustrations accompany each step to show how to properly disassemble the various systems, with notes to mark positions for reassembly.
Similar to Caterpillar cat 313 d2 excavator (prefix lcy) service repair manual (lcy00001 and up) (12)
John deere 40, 44, 51, 52, 60, 67, 70, & 70 a loaders service repair manualfdhjsekdme
This technical manual provides specifications and information for John Deere backhoes, loaders, and attachments. It includes specifications on hydraulic systems, function times, capacities, dimensions, cycle times, and torque values. The manual aims to equip technicians with the information needed to work on and service various John Deere equipment.
John deere 38 inch commercial walk behind mower service repair manualfdhjsekdme
This technical manual provides service information for John Deere 38, 48, and 54-inch commercial walk-behind mowers. It contains specifications, repair and diagnostic procedures, and safety information. The manual is intended for experienced technicians and covers engine, fuel, electrical, power train, steering, brake, and mower deck systems. Safety messages in the introduction emphasize the importance of following proper safety precautions when working on equipment.
John deere 30 inch hydraulic tiller service repair manualfdhjsekdme
This technical manual provides specifications and information for John Deere backhoes, loaders, and attachments. It includes specifications on hydraulic systems, function times, capacities, dimensions, cycle times, and torque values. The manual aims to equip technicians with the information needed to work on and service various John Deere equipment.
John deere 14 sz walk behind mower service repair manualfdhjsekdme
This document contains information related to John Deere walk-behind mowers. It includes:
1. Specifications for various mower models including the 12PB/12PC/12SB, 14PB/14PT/14PZ/14SB, 14SC/14SX/14SE/14ST, and 14SZ.
2. Repair specifications for Briggs & Stratton 2-cycle and 4-cycle engines, Kawasaki 4-cycle engines, and Kansaki 2- and 5-speed transaxles.
3. Safety information related to handling fluids, preventing battery explosions, preparing for emergencies, and preventing acid burns from battery electrolyte.
John deere 14 sx walk behind mower service repair manualfdhjsekdme
This document contains information related to walk-behind mowers manufactured by John Deere, including:
1. Model numbers and specifications for various mower models.
2. Safety warnings and instructions for handling fluids, batteries, and preparing for emergencies.
3. Tables providing repair specifications for engine components, including torque specifications.
The document provides general technical information for technicians servicing John Deere walk-behind mowers, including identifying models, safety practices, and specifications to guide repairs. It begins with safety instructions and then provides specifications and identification information for the different mower models and their components.
John deere 14 st walk behind mower service repair manualfdhjsekdme
This document contains information related to John Deere walk-behind mowers. It includes:
1. Specifications for various mower models including the 12PB/12PC/12SB, 14PB/14PT/14PZ/14SB, 14SC/14SX/14SE/14ST, and 14SZ.
2. Repair specifications for Briggs & Stratton 2-cycle and 4-cycle engines, Kawasaki 4-cycle engines, and Kansaki 2- and 5-speed transaxles.
3. Safety information related to handling fluids, preventing battery explosions, preparing for emergencies, and preventing acid burns from battery electrolyte.
John deere 14 se walk behind mower service repair manualfdhjsekdme
This document contains information related to John Deere walk-behind mowers. It includes:
1. Specifications for various mower models including the 12PB/12PC/12SB, 14PB/14PT/14PZ/14SB, 14SC/14SX/14SE/14ST, and 14SZ.
2. Repair specifications for Briggs & Stratton 2-cycle and 4-cycle engines, Kawasaki 4-cycle engines, and Kansaki 2- and 5-speed transaxles.
3. Safety information related to handling fluids, preventing battery explosions, preparing for emergencies, and preventing acid burns from battery electrolyte.
John deere 14 sc walk behind mower service repair manualfdhjsekdme
This document contains information related to John Deere walk-behind mowers. It includes:
1. Specifications for various mower models including the 12PB/12PC/12SB, 14PB/14PT/14PZ/14SB, 14SC/14SX/14SE/14ST, and 14SZ.
2. Repair specifications for Briggs & Stratton 2-cycle and 4-cycle engines, Kawasaki 4-cycle engines, and Kansaki 2- and 5-speed transaxles.
3. Safety information related to handling fluids, preventing battery explosions, preparing for emergencies, and preventing acid burns from battery electrolyte.
John deere 14 sb walk behind mower service repair manualfdhjsekdme
This document contains sections and groups related to service information for John Deere 21-inch rear discharge walk-behind rotary mowers. It includes specifications, repair procedures, diagnostics, and testing for various mower components including engines made by Briggs & Stratton and Kawasaki, as well as transmissions. Safety precautions are provided at the beginning relating to handling fluids, preventing battery explosions, preparing for emergencies, and preventing acid burns. The document is organized into sections covering general information, engine repair, fuel/air systems, electrical systems, power trains, and operational tests and adjustments.
John deere 14 pz walk behind mower service repair manualfdhjsekdme
This document contains information related to John Deere walk-behind mowers. It includes:
1. Specifications for various mower models including the 12PB/12PC/12SB, 14PB/14PT/14PZ/14SB, 14SC/14SX/14SE/14ST, and 14SZ.
2. Repair specifications for Briggs & Stratton 2-cycle and 4-cycle engines, Kawasaki 4-cycle engines, and Kansaki 2- and 5-speed transaxles.
3. Safety information related to handling fluids, preventing battery explosions, preparing for emergencies, and preventing acid burns from battery electrolyte.
John deere 14 pt walk behind mower service repair manualfdhjsekdme
This document contains sections and groups related to service information for John Deere 21-inch rear discharge walk-behind rotary mowers. It includes specifications, repair procedures, diagnostics, and testing for various mower components including engines made by Briggs & Stratton and Kawasaki, as well as transmissions. Safety precautions are provided at the beginning relating to handling fluids, preventing battery explosions, preparing for emergencies, and preventing acid burns. The document is organized into sections covering general information, engine repair, fuel/air systems, electrical systems, power trains, and operational tests and adjustments.
John deere 14 pb walk behind mower service repair manualfdhjsekdme
This document contains sections and groups related to service information for John Deere 21-inch rear discharge walk-behind rotary mowers. It includes specifications for various mower models, repair specifications for engines and components, information on fuels and lubricants, and locations for identifying serial numbers. The document outlines sections on general information, engine repair, fuel and air systems, electrical systems, power trains, tests and adjustments, and miscellaneous repair items. It provides technicians with the information needed to service, diagnose, and repair the mowers.
John deere 12 sb walk behind mower service repair manualfdhjsekdme
This document contains sections and groups related to service information for John Deere 21-inch rear discharge walk-behind rotary mowers. It includes specifications for various mower models, repair specifications for engines and components, information on fuels and lubricants, and locations for identifying serial numbers. The document outlines sections on general information, engine repair, fuel and air systems, electrical systems, power trains, tests and adjustments, and miscellaneous repair items. It provides technicians with the information needed to service, diagnose, and repair components.
John deere 12 pc walk behind mower service repair manualfdhjsekdme
This document contains sections and groups related to service information for John Deere 21-inch rear discharge walk-behind rotary mowers. It includes specifications, repair procedures, diagnostics, and testing for various mower components including engines made by Briggs & Stratton and Kawasaki, as well as transmissions. Safety precautions are provided at the beginning relating to handling fluids, preventing battery explosions, preparing for emergencies, and preventing acid burns. The document is organized into sections covering general information, engine repair, fuel/air systems, electrical systems, power trains, and operational tests/adjustments.
John deere 12 pb walk behind mower service repair manualfdhjsekdme
This document is the technical manual for John Deere 21-inch rear discharge walk-behind rotary mowers. It provides specifications, repair and diagnostic information for the mowers and their components. The manual is divided into sections covering general information, engine repair for different engine types, fuel and air systems, electrical systems, power trains, tests and adjustments, and troubleshooting. It contains detailed instructions and specifications to guide technicians in servicing and repairing the mowers. Model numbers covered include models with Briggs & Stratton 2-cycle and 4-cycle engines as well as Kawasaki 4-cycle engines.
Clark ecg 20 32 genesis series truck service repair manualfdhjsekdme
This document provides instructions for safely maintaining a Clark industrial lift truck. It discusses safety signs and messages, safe maintenance practices, lifting and jacking procedures, towing instructions, and general shop precautions. Key safety points include wearing protective equipment, raising drive wheels off the floor before working, disconnecting batteries, checking for fuel and electrical issues, and only allowing trained personnel to perform maintenance.
Clark ec 120 forklift service repair manualfdhjsekdme
This section provides instructions for safely lifting, jacking and blocking a forklift truck. It describes how to use the upright as a lever to raise just the drive wheels off the floor for service. It also explains how to raise the rear or entire truck using a jack and secure blocking. Safety precautions are emphasized, such as ensuring lifting equipment has adequate capacity and the truck is stable before working on it.
Clark ec 90 forklift service repair manualfdhjsekdme
This section provides instructions for safely lifting, jacking and blocking a forklift truck. It describes how to use the forklift's upright as a lever to raise just the drive wheels off the floor for service. It also provides guidelines for raising the rear or entire truck using lifting equipment with adequate capacity. Safety precautions are outlined, such as ensuring the forklift is on level ground, in neutral with the brakes set before lifting. Defective lifting equipment should not be used.
Clark e357 forklift service repair manualfdhjsekdme
This document is a service manual for Clark lift trucks. It provides maintenance and repair procedures for technicians. The manual contains sections on safety practices, planned maintenance schedules, component inspections and repairs, specifications, and schematics. Regular maintenance is important to keep lift trucks in safe operating condition. Only trained personnel should perform repairs following the manufacturer's recommended procedures.
Clark dpx 55 forklift service repair manualfdhjsekdme
The document provides instructions for removing and installing a transmission on a Clark forklift. It describes disconnecting all transmission connections, draining the oil, removing mounting bolts and lowering the transmission out of the truck using lifting equipment. Installation involves bolting the torque converter to the engine flywheel through an access port, then lifting the transmission into place and reconnecting all lines and linkages. Safety precautions are noted such as securing the truck before starting and keeping inspection openings covered.
What Are The Immediate Steps To Take When The VW Temperature Light Starts Fla...Import Motorworks
Learn how to respond when the red temperature light flashes in your VW with this presentation. From checking coolant levels to seeking professional help, follow these steps promptly to prevent engine damage and ensure safety on the road.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Learn why monitoring your Mercedes' Exhaust Back Pressure (EBP) sensor is crucial. Understand its role in engine performance and emission reduction. Discover five warning signs of EBP sensor failure, from loss of power to increased emissions. Take action promptly to avoid costly repairs and maintain your Mercedes' reliability and efficiency.
What Is Recruitment Processing Outsourcing (RPO) Services?Impeccable HR
Impeccable HR provides a wide range of RPO services for your bulk hiring needs within a stipulated period. They meticulously build RPO solutions to improve your recruitment process. RPO services are great for budget-conscious recruiters who want high-quality personnel.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Your VW's camshaft position sensor is crucial for engine performance. Signs of failure include engine misfires, difficulty starting, stalling at low speeds, reduced fuel efficiency, and the check engine light. Prompt inspection and replacement can prevent further damage and keep your VW running smoothly.
Comprehensive program for Agricultural Finance, the Automotive Sector, and Empowerment . We will define the full scope and provide a detailed two-week plan for identifying strategic partners in each area within Limpopo, including target areas.:
1. Agricultural : Supporting Primary and Secondary Agriculture
• Scope: Provide support solutions to enhance agricultural productivity and sustainability.
• Target Areas: Polokwane, Tzaneen, Thohoyandou, Makhado, and Giyani.
2. Automotive Sector: Partnerships with Mechanics and Panel Beater Shops
• Scope: Develop collaborations with automotive service providers to improve service quality and business operations.
• Target Areas: Polokwane, Lephalale, Mokopane, Phalaborwa, and Bela-Bela.
3. Empowerment : Focusing on Women Empowerment
• Scope: Provide business support support and training to women-owned businesses, promoting economic inclusion.
• Target Areas: Polokwane, Thohoyandou, Musina, Burgersfort, and Louis Trichardt.
We will also prioritize Industrial Economic Zone areas and their priorities.
Sign up on https://profilesmes.online/welcome/
To be eligible:
1. You must have a registered business and operate in Limpopo
2. Generate revenue
3. Sectors : Agriculture ( primary and secondary) and Automative
Women and Youth are encouraged to apply even if you don't fall in those sectors.
What Could Cause The Headlights On Your Porsche 911 To Stop WorkingLancer Service
Discover why your Porsche 911 headlights might flicker out unexpectedly. From aging bulbs to electrical gremlins and moisture mishaps, we're delving into the reasons behind the blackout. Stay tuned to illuminate the road ahead and ensure your lights shine bright for safer journeys.
2. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 313D2 EXCAVATOR LCY
Configuration: 313D2 L Excavator LCY00001-UP (MACHINE) POWERED BY C4.4 Engine
Disassembly and Assembly
313D2 Excavator Machine Systems
Media Number -UENR7323-03 Publication Date -01/09/2015 Date Updated -14/12/2017
i06303560
Final Drive and Travel Motor - Disassemble
SMCS - 4050-015; 4351-015
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7573 Link Bracket 3
B 1P-2420 Transmission Repair Stand 1
C 8T-6699 Bolts 2
D
1P-0074 Slide Hammer Puller Gp 1
4C-5666 Threaded Adapter 1
123-6702 Backlash Gauge Gp 1
E 1P-0510 Driver Gp 1
F 8H-0663 Bearing Puller Gp 1
G 1P-1863 Retaining Ring Pliers 1
H 9U-7346 Spanner Wrench As 1
Start By:
a. Remove the final drive and the travel motor. Refer to Disassembly and Assembly Manual ,
"Final Drive and Travel Motor - Remove".
NOTICE
1/23
313D2 L Excavator LCY00001-UP (MACHINE) POWERED BY C4.4 Engine(M007...
2020/5/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat products.
Dispose of all fluids according to local regulations and mandates.
Personal injury can result from hydraulic oil pressure and hot oil.
Hydraulic oil pressure can remain in the hydraulic system after the
engine has been stopped. Serious injury can be caused if this pressure is
not released before any service is done on the hydraulic system.
Make sure all of the work tools have been lowered to the ground, and
the oil is cool before removing any components or lines. Remove the oil
filler cap only when the engine is stopped, and the filler cap is cool
enough to touch with your bare hand.
1. Thoroughly clean the outside of the final drive and travel motor prior to disassembly.
2. Remove the sprocket from the final drive and the travel motor. The weight of the sprocket is
approximately 39 kg (85 lb).
3. Mark the alignment of the final drive and travel motor for reassembly purposes. The parts
must be reinstalled in the original locations.
2/23
313D2 L Excavator LCY00001-UP (MACHINE) POWERED BY C4.4 Engine(M007...
2020/5/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. Illustration 1 g00940682
4. Use Tooling (A) and a suitable lifting device to position the final drive and the travel motor
onto Tooling (B). The combined weight of the final drive and travel motor is approximately
170 kg (375 lb).
5. Drain the oil from the final drive into a suitable container for storage or for disposal. Refer
to Operation and Maintenance Manual, "Capacities (Refill)" for the capacity of the final
drive.
6. Remove fittings (1). Remove fittings (2) from traction control valve (3).
7. Remove nine bolts (4) that secure traction control valve (3) to the final drive.
8. Use two persons to remove traction control valve (3) from the final drive. The weight of
travel brake valve (3) is approximately 27 kg (60 lb).
3/23
313D2 L Excavator LCY00001-UP (MACHINE) POWERED BY C4.4 Engine(M007...
2020/5/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. Illustration 2 g00940716
9. Remove valve plate (5) and O-ring seal (6).
Illustration 3 g01405139
10. Use Tooling (D) to remove bearing (7).
Disassembly of the Counterbalance Valve
Illustration 4 g01405725
4/23
313D2 L Excavator LCY00001-UP (MACHINE) POWERED BY C4.4 Engine(M007...
2020/5/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. Illustration 5 g01405227
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
1. Position the counterbalance valve, as shown. Remove plug (8) and adapter (9).
2. Remove spring (10) and spool (11).
Illustration 6 g01405232
5/23
313D2 L Excavator LCY00001-UP (MACHINE) POWERED BY C4.4 Engine(M007...
2020/5/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. 3. Remove relief valve assemblies (12).
Illustration 7 g01405243
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
4. Remove seat (13). Seat (13) is pressed onto valve (17). Use new parts if seat (13) or valve
(17) is damaged. Do not disassemble these components. Make sure that you reuse the other
component.
5. Remove backup ring (14) and O-ring seal (15).
6. Remove O-ring seal (22).
7. Remove nut (20).
8. Remove screw (27).
9. Remove stopper (26). Remove backup ring (19) and O-ring seal (18) from stopper (19).
10. Remove valve (21), piston (25), and spring (16) from the housing.
11. Remove backup ring (23) and O-ring seal (24) from piston (25).
6/23
313D2 L Excavator LCY00001-UP (MACHINE) POWERED BY C4.4 Engine(M007...
2020/5/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. Illustration 8 g01405284
Illustration 9 g01405299
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
12. Remove covers (28) and the O-ring seals.
13. Remove springs (29), guides (30), and spool assembly (31).
7/23
313D2 L Excavator LCY00001-UP (MACHINE) POWERED BY C4.4 Engine(M007...
2020/5/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. Illustration 10 g01405345
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
14. Remove valve (32), spring (33), and ball (34) from one end of spool (35). Repeat for the
other end of spool (35).
Illustration 11 g01405633
8/23
313D2 L Excavator LCY00001-UP (MACHINE) POWERED BY C4.4 Engine(M007...
2020/5/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
15. Remove plug (36), spring (38), and piston (39) from both sides of the housing assembly.
16. Remove O-ring seal (37) from each plug (36).
Note: Remove the remaining allen head bolts from the housing assembly for cleaning
purposes, if necessary. Each allen head bolt has an O-ring seal. Check the O-ring seal for
wear or for damage. Replace the O-ring seal, if necessary.
Disassembly of the Travel Motor
Illustration 12 g01405794
1. Remove O-ring seal (40) and springs (41).
9/23
313D2 L Excavator LCY00001-UP (MACHINE) POWERED BY C4.4 Engine(M007...
2020/5/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. Illustration 13 g01405828
2. Install Tooling (C) onto piston assembly (42). Use Tooling (C) and a suitable prybar to
remove piston assembly (42) from body (43).
Illustration 14 g01405855
3. Remove O-ring seals (45) and (46) from piston assembly (42). Remove backup rings (44)
and (47) from piston assembly (42).
10/23
313D2 L Excavator LCY00001-UP (MACHINE) POWERED BY C4.4 Engine(M0...
2020/5/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. Illustration 15 g01405867
4. Use suitable drivers or a suitable lever to remove guide assembly (48).
Illustration 16 g01405885
5. Remove O-ring seal (49) and backup ring (50) from guide assembly (48).
11/23
313D2 L Excavator LCY00001-UP (MACHINE) POWERED BY C4.4 Engine(M0...
2020/5/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. Illustration 17 g01406117
6. Remove four separator plates (51) and four friction plates (52). Note the alternating order of
separator plates (51) and friction plates (52) for assembly purposes.
Note: Do not allow the components of barrel assembly (53) to come apart while you
remove barrel assembly (53). The components of barrel assembly (53) must be reinstalled
into the original positions.
Note: Oil will drain from the final drive. Place a suitable container under the final drive for
storage or disposal. Refer to Operation and Maintenance Manual, "Capacities (Refill)" for
the fluid capacity of the final drive.
7. Position the final drive horizontally.
8. Remove barrel assembly (53).
12/23
313D2 L Excavator LCY00001-UP (MACHINE) POWERED BY C4.4 Engine(M0...
2020/5/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. Illustration 18 g01406180
Note: Mark the component locations for assembly purposes before you disassemble barrel
assembly (53).
9. Remove piston assemblies (54) and retainer (55) from barrel assembly (53).
Illustration 19 g01406210
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
10. Remove retainer (56), spacer (57), and springs (58) from barrel assembly (53).
13/23
313D2 L Excavator LCY00001-UP (MACHINE) POWERED BY C4.4 Engine(M0...
2020/5/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. Illustration 20 g01406263
11. Put location marks on cam plate (59) for assembly purposes. Make sure that the thick end of
cam plate (59) is adjacent to the opening that is across body (43). Remove cam plate (59).
Illustration 21 g01406329
Illustration 22 g01406338
14/23
313D2 L Excavator LCY00001-UP (MACHINE) POWERED BY C4.4 Engine(M0...
2020/5/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
12. Remove piston (60) and spring (62).
13. Remove key (61).
Disassembly of the Final Drive
Illustration 23 g01406376
1. Use a suitable lifting device to position the final drive on Tooling (B), as shown. The weight
of the final drive is approximately 200 kg (441 lb).
2. Remove plugs (63). Remove the O-ring seals from plugs (63). Check the O-ring seals for
wear or for damage. Replace the O-ring seals, if necessary.
3. Remove bolts (65). Remove cover (64).
15/23
313D2 L Excavator LCY00001-UP (MACHINE) POWERED BY C4.4 Engine(M0...
2020/5/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. Illustration 24 g01406386
4. Raise the temperature of bolts (66) in order to loosen the thread sealant.
5. Remove bolts (66) and plate (67).
Illustration 25 g01406397
6. Remove sun gear (68).
16/23
313D2 L Excavator LCY00001-UP (MACHINE) POWERED BY C4.4 Engine(M0...
2020/5/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. Illustration 26 g01406400
7. Attach Tooling (A) and a suitable lifting device to carrier assembly (69). Remove carrier
assembly (69), planetary gear assembly (70), and bearing assembly (71) as a unit.
Illustration 27 g01406789
8. Remove planetary gear (70) and bearing assembly (71) from carrier assembly (69). Remove
the remaining planetary gears (70) and bearings (71).
Illustration 28 g01406822
9. Remove sun gear (72).
17/23
313D2 L Excavator LCY00001-UP (MACHINE) POWERED BY C4.4 Engine(M0...
2020/5/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
19. 10. Raise the temperature of bolts (73) in order to loosen the thread sealant. Remove bolts (73).
Remove plate (74).
Illustration 29 g01406850
11. Remove retaining ring (75) from sun gear (72). Check retaining ring (75) for wear or for
damage. Replace retaining ring (75), if necessary.
Illustration 30 g01406853
12. Remove planetary gear (76).
18/23
313D2 L Excavator LCY00001-UP (MACHINE) POWERED BY C4.4 Engine(M0...
2020/5/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
20. Illustration 31 g01406875
13. Remove bearing (77), race (78), and thrust washer (79).
14. Repeat Steps 12 and 13 in order to remove the remaining planetary gear assemblies.
Illustration 32 g01406882
15. Remove bolt (80) and plate (81).
19/23
313D2 L Excavator LCY00001-UP (MACHINE) POWERED BY C4.4 Engine(M0...
2020/5/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
21. Illustration 33 g01406885
Illustration 34 g01406886
16. Use Tooling (H) to remove nut (82).
Illustration 35 g01406906
17. Install Tooling (A) and a suitable lifting device to housing (83). The weight of housing (83)
is approximately 35 kg (77 lb).
18. Remove housing (83) from body assembly (84).
20/23
313D2 L Excavator LCY00001-UP (MACHINE) POWERED BY C4.4 Engine(M0...
2020/5/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
22. Illustration 36 g01406912
19. Remove Duo-Cone Seal Gp seal (85) from the body assembly. Remove the Duo-Cone Seal
Gp seal from the housing.
Illustration 37 g01407100
20. Remove both bearings (86) from housing (83).
21/23
313D2 L Excavator LCY00001-UP (MACHINE) POWERED BY C4.4 Engine(M0...
2020/5/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
23. Illustration 38 g01407089
21. Remove both bearings (87) from housing (83).
Illustration 39 g01407115
22. Position body assembly (84) horizontally. Remove shaft assembly (88), the bearing, and the
retaining ring.
22/23
313D2 L Excavator LCY00001-UP (MACHINE) POWERED BY C4.4 Engine(M0...
2020/5/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
24. Illustration 40 g01407144
23. Use Tooling (G) to remove retaining ring (89) from shaft assembly (88).
Illustration 41 g01407161
24. Use Tooling (E), Tooling (F), and a suitable press to remove bearing (90).
Illustration 42 g01407166
25. Remove lip seal (91) from the body assembly.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sat May 16 23:26:11 UTC+0800 2020
23/23
313D2 L Excavator LCY00001-UP (MACHINE) POWERED BY C4.4 Engine(M0...
2020/5/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
25. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 313D2 EXCAVATOR LCY
Configuration: 313D2 L Excavator LCY00001-UP (MACHINE) POWERED BY C4.4 Engine
Disassembly and Assembly
313D2 Excavator Machine Systems
Media Number -UENR7323-03 Publication Date -01/09/2015 Date Updated -14/12/2017
i07219742
Final Drive and Travel Motor - Disassemble
SMCS - 4050-015; 4351-015
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 422-5474 M16x2x24 mm Lifting Eye Assembly 2
B 1P-2420 Transmission Repair Stand 1
C 8H-0663 Bearing Puller Assembly 1
D 422-5473 M12x1.75x21 mm Lifting Eye Assembly 2
E 422-5472 M10x1.5x16 mm Lifting Eye Assembly 2
F 1U-9895 Crossblock 1
Start By:
a. Remove the final drive and the travel motor assembly.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
1/22
313D2 L Excavator LCY00001-UP (MACHINE) POWERED BY C4.4 Engine(M007...
2020/5/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
26. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
27. Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat®
products.
Dispose of all fluids according to local regulations and mandates.
Personal injury can result from hydraulic oil pressure and hot oil.
Hydraulic oil pressure can remain in the hydraulic system after the
engine has been stopped. Serious injury can be caused if this pressure is
not released before any service is done on the hydraulic system.
Make sure all of the work tools have been lowered to the ground, and
the oil is cool before removing any components or lines. Remove the oil
filler cap only when the engine is stopped, and the filler cap is cool
enough to touch with your bare hand.
1. Thoroughly clean the outside of the final drive and travel motor prior to disassembly.
2. Remove the sprocket from the final drive and the travel motor assembly. The weight of the
sprocket is approximately 39 kg (85 lb).
3. Mark the alignment of the final drive and travel motor for reassembly purposes. The parts
must be reinstalled in the original locations.
Illustration 1 g06256385
4. Use Tooling (A) and a suitable lifting device to position final drive assembly (1) onto
Tooling (B). The weight of final drive assembly (1) is approximately 163 kg (360 lb).
2/22
313D2 L Excavator LCY00001-UP (MACHINE) POWERED BY C4.4 Engine(M007...
2020/5/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
28. 5. Drain the oil from final drive assembly (1) into a suitable container for storage or for
disposal. Refer to Operation and Maintenance Manual, "Capacities (Refill)" for the capacity
of the final drive.
Illustration 2 g06256798
6. Remove plug (2), plugs (3), and the O-ring seals.
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
Illustration 3 g06256843
3/22
313D2 L Excavator LCY00001-UP (MACHINE) POWERED BY C4.4 Engine(M007...
2020/5/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
29. Illustration 4 g06256845
7. Remove plugs (4) and the O-ring seals.
8. Remove plug (5), spring (7), valve (6), and the O-ring seals.
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
Illustration 5 g06256847
4/22
313D2 L Excavator LCY00001-UP (MACHINE) POWERED BY C4.4 Engine(M007...
2020/5/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...