This document provides instructions for removing and installing the front gear group on Caterpillar C4.4 engines. The removal procedure involves locking the crankshaft, camshaft, and fuel injection pump in position using timing pins. Components like the idler gears, camshaft gear, and housing bearing are then removed. Installation follows the reverse order, with lubrication of gears and checking of timing, backlash, and end play measurements upon completion. Tools and torque specifications are provided.
Caterpillar cat 312 e excavator (prefix wey) service repair manual (wey00001 ...fjjskekdmmse
The document provides instructions for removing and installing the front gear group on 312E and 312E L excavator models powered by a C4.4 engine. The removal procedure involves using various tools to lock the crankshaft, camshaft and fuel injection pump in position before removing components like the idler gears, camshaft gear, and front housing bearing. The installation procedure outlines cleaning and inspecting components before reinstalling them in reverse order of removal, ensuring proper positioning and locking of gears.
Caterpillar cat 428 f backhoe loader (prefix rak) service repair manual (rak0...fujsekwsxksmem
This document provides instructions for removing and installing the front gear group of a 428F backhoe loader. It outlines the necessary tools and safety precautions. The removal process involves locking the crankshaft and fuel injection pump positions, loosening rocker arms, and removing gears and housings. The installation follows the reverse order and ensures proper positioning and cleaning of components.
Caterpillar cat 314 e cr excavator (prefix ecn) service repair manual (ecn000...jfdskekdmme
The document provides instructions for removing and installing the front gear group on a Caterpillar C4.4 engine. Key steps include:
1. Locking the crankshaft, camshaft, and fuel injection pump in position using timing pins to maintain proper timing.
2. Removing the idler gear and camshaft gear, taking note of alignment marks for reinstallation.
3. Cleaning and inspecting components, then reinstalling the gears in proper alignment, checking backlash and end play with gauges.
4. Locking components again and tightening fasteners to specification before removing locking pins and returning the valve mechanism to the safe position.
Caterpillar cat m314 f wheeled excavator (prefix f4a) service repair manual (...ufjjskekkmed
The document provides instructions for removing the front housing on a C4.4 engine. Key steps include:
1. Removing various external components like the fan, pulley, oil pan, and gears.
2. Disconnecting electrical and coolant components from the front housing.
3. Removing several bolts of different lengths that secure the front housing to the engine block.
4. Removing the front housing and gasket from the engine block. Proper identification of removed parts is important for reinstallation.
Caterpillar cat 312 e excavator (prefix pzl) service repair manual (pzl00001 ...fjjskekdmmse
This document provides instructions for removing and installing the front gear group on a 312E or 312E L excavator with a C4.4 engine. The key steps include:
1. Locking the crankshaft and fuel injection pump gear in position using timing pins.
2. Loosening the rocker arm inserts to fully close the valves.
3. Removing the camshaft, idler, and housing gears in the proper order while maintaining timing marks.
4. Cleaning and inspecting components before installing in reverse order while ensuring proper gear mesh and end play measurements.
Caterpillar cat 313 f excavator (prefix prg) service repair manual (prg00001 ...fjjskekdmmse
This document provides instructions for removing and installing the front gear group on a C4.4 engine. The procedure involves using various tools to lock the crankshaft, camshaft and fuel injection pump in position before removing gears. Individual gears are removed and installed one at a time, ensuring proper timing is maintained through alignment of marks on each gear. End play and backlash are checked using gauges once installation is complete. Precautions are outlined to prevent damage to engine components.
Hyundai hl730 3 wheel loader service repair manualfjjskekdmmse
The document provides instructions for disassembling and assembling a priority valve and steering unit. It includes diagrams labeling the parts of each system.
The priority valve disassembly instructions describe removing the plugs and seal rings, pressing out the spool, and disassembling the remaining parts. Assembly is the reverse of disassembly.
The steering unit disassembly involves removing the end cover, cardan shaft, plates and seals. Individual parts like the spool, springs and ball are then removed. Assembly shows reinstalling these parts in reverse order with lubrication. Troubleshooting tips are provided for common issues.
This document provides instructions for removing and installing the front gear group on a Caterpillar 312E or 312E L excavator engine. The removal procedure involves using tools to lock the crankshaft, camshaft, and fuel injection pump in position before loosening threaded inserts on the rocker arms. Several gears and other components are then removed from the front of the engine housing. The installation procedure outlines cleaning and inspecting parts before reinstalling components in reverse order, maintaining proper positioning and locking of internal components.
Caterpillar cat 312 e excavator (prefix wey) service repair manual (wey00001 ...fjjskekdmmse
The document provides instructions for removing and installing the front gear group on 312E and 312E L excavator models powered by a C4.4 engine. The removal procedure involves using various tools to lock the crankshaft, camshaft and fuel injection pump in position before removing components like the idler gears, camshaft gear, and front housing bearing. The installation procedure outlines cleaning and inspecting components before reinstalling them in reverse order of removal, ensuring proper positioning and locking of gears.
Caterpillar cat 428 f backhoe loader (prefix rak) service repair manual (rak0...fujsekwsxksmem
This document provides instructions for removing and installing the front gear group of a 428F backhoe loader. It outlines the necessary tools and safety precautions. The removal process involves locking the crankshaft and fuel injection pump positions, loosening rocker arms, and removing gears and housings. The installation follows the reverse order and ensures proper positioning and cleaning of components.
Caterpillar cat 314 e cr excavator (prefix ecn) service repair manual (ecn000...jfdskekdmme
The document provides instructions for removing and installing the front gear group on a Caterpillar C4.4 engine. Key steps include:
1. Locking the crankshaft, camshaft, and fuel injection pump in position using timing pins to maintain proper timing.
2. Removing the idler gear and camshaft gear, taking note of alignment marks for reinstallation.
3. Cleaning and inspecting components, then reinstalling the gears in proper alignment, checking backlash and end play with gauges.
4. Locking components again and tightening fasteners to specification before removing locking pins and returning the valve mechanism to the safe position.
Caterpillar cat m314 f wheeled excavator (prefix f4a) service repair manual (...ufjjskekkmed
The document provides instructions for removing the front housing on a C4.4 engine. Key steps include:
1. Removing various external components like the fan, pulley, oil pan, and gears.
2. Disconnecting electrical and coolant components from the front housing.
3. Removing several bolts of different lengths that secure the front housing to the engine block.
4. Removing the front housing and gasket from the engine block. Proper identification of removed parts is important for reinstallation.
Caterpillar cat 312 e excavator (prefix pzl) service repair manual (pzl00001 ...fjjskekdmmse
This document provides instructions for removing and installing the front gear group on a 312E or 312E L excavator with a C4.4 engine. The key steps include:
1. Locking the crankshaft and fuel injection pump gear in position using timing pins.
2. Loosening the rocker arm inserts to fully close the valves.
3. Removing the camshaft, idler, and housing gears in the proper order while maintaining timing marks.
4. Cleaning and inspecting components before installing in reverse order while ensuring proper gear mesh and end play measurements.
Caterpillar cat 313 f excavator (prefix prg) service repair manual (prg00001 ...fjjskekdmmse
This document provides instructions for removing and installing the front gear group on a C4.4 engine. The procedure involves using various tools to lock the crankshaft, camshaft and fuel injection pump in position before removing gears. Individual gears are removed and installed one at a time, ensuring proper timing is maintained through alignment of marks on each gear. End play and backlash are checked using gauges once installation is complete. Precautions are outlined to prevent damage to engine components.
Hyundai hl730 3 wheel loader service repair manualfjjskekdmmse
The document provides instructions for disassembling and assembling a priority valve and steering unit. It includes diagrams labeling the parts of each system.
The priority valve disassembly instructions describe removing the plugs and seal rings, pressing out the spool, and disassembling the remaining parts. Assembly is the reverse of disassembly.
The steering unit disassembly involves removing the end cover, cardan shaft, plates and seals. Individual parts like the spool, springs and ball are then removed. Assembly shows reinstalling these parts in reverse order with lubrication. Troubleshooting tips are provided for common issues.
This document provides instructions for removing and installing the front gear group on a Caterpillar 312E or 312E L excavator engine. The removal procedure involves using tools to lock the crankshaft, camshaft, and fuel injection pump in position before loosening threaded inserts on the rocker arms. Several gears and other components are then removed from the front of the engine housing. The installation procedure outlines cleaning and inspecting parts before reinstalling components in reverse order, maintaining proper positioning and locking of internal components.
This document provides instructions for removing and installing the front gear group on Caterpillar C4.4 engines. The removal procedure involves locking the crankshaft, camshaft, and fuel injection pump positions using timing pins. Components like the idler gears, camshaft gear, and housing bearing are then removed. Installation follows the reverse order, with lubrication of gears and checking of timing, backlash, and end play measurements upon completion. Tools and torque specifications are provided.
Caterpillar cat 312 e l excavator (prefix pzl) service repair manual (pzl0000...idkkddmmd1
This document provides instructions for removing and installing the front gear group on a Caterpillar 312E or 312E L excavator engine. The removal procedure involves using tools to lock the crankshaft, camshaft, and fuel injection pump in position before loosening threaded inserts on the rocker arms. Several gears and other components are then removed from the front of the engine housing. The installation procedure outlines cleaning and inspecting parts before reinstalling components in reverse order, maintaining proper positioning and locking of internal components.
This document provides instructions for removing and installing the front gear group on Caterpillar C4.4 engines. The removal procedure involves locking the crankshaft, camshaft, and fuel injection pump in position using timing pins. Components like the idler gears, camshaft gear, and housing bearing are then removed. Installation follows the reverse order, with lubrication of gears and checking of timing, backlash, and end play measurements upon completion. Tools and torque specifications are provided.
Caterpillar cat 312 e excavator (prefix pzl) service repair manual (pzl00001 ...idkkddmmd1
This document provides instructions for removing and installing the front gear group on a Caterpillar 312E or 312E L excavator engine. The removal procedure involves using tools to lock the crankshaft, camshaft, and fuel injection pump in position before loosening threaded inserts on the rocker arms. Several gears and other components are then removed from the front of the engine housing. The installation procedure outlines cleaning and inspecting parts before reinstalling components in reverse order, maintaining proper positioning and locking of internal components.
This document provides instructions for removing and installing the front gear group on Caterpillar C4.4 engines. The removal procedure involves locking the crankshaft, camshaft, and fuel injection pump in position using timing pins. Components like the idler gears, camshaft gear, and housing bearing are then removed. Installation follows the reverse order, with lubrication of gears and checking of timing, backlash, and end play measurements upon completion. Tools and torque specifications are provided.
This document provides instructions for removing and installing the front gear group on a Caterpillar 312E or 312E L excavator engine. The removal procedure involves using tools to lock the crankshaft, camshaft, and fuel injection pump in position before loosening threaded inserts on the rocker arms. Several gears and other components are then removed from the front of the engine housing. The installation procedure outlines cleaning and inspecting parts before reinstalling components in reverse order, maintaining proper positioning and locking of internal components.
This document provides instructions for removing and installing the front gear group on Caterpillar C4.4 engines. The removal procedure involves locking the crankshaft, camshaft, and fuel injection pump positions using timing pins. Components like the idler gears, camshaft gear, and housing bearing are then removed. Installation follows the reverse order, with lubrication of gears and checking of timing, backlash, and end play measurements upon completion. Tools and torque specifications are provided.
This document provides instructions for removing and installing the front gear group on Caterpillar C4.4 engines. The removal procedure involves locking the crankshaft, camshaft, and fuel injection pump positions using timing pins. Components like the idler gears, camshaft gear, and housing bearing are then removed. Installation follows the reverse order, with lubrication of gears and checking of timing, backlash, and end play measurements upon completion. Tools and torque specifications are provided.
Caterpillar cat 312 e l excavator (prefix pzl) service repair manual (pzl0000...fjjskekdmmse
This document provides instructions for removing and installing the front gear group on a 312E or 312E L excavator with a C4.4 engine. The key steps include:
1. Locking the crankshaft and fuel injection pump gear in position using timing pins.
2. Loosening the rocker arm inserts to fully close the valves.
3. Removing the camshaft, idler, and housing gears in the proper order while maintaining timing marks.
4. Cleaning and inspecting components before installing in reverse order while checking gear mesh and end play/backlash specifications.
Caterpillar cat 312 e excavator (prefix wey) service repair manual (wey00001 ...fjjsekdmme
This document provides instructions for removing and installing the front gear group on a C4.4 engine. The removal procedure involves locking the crankshaft, fuel injection pump, and camshaft in position using timing pins. Components like the idler gears, camshaft gear, and housing bearing are then removed. Installation follows the reverse order, with lubrication of parts and verification of proper timing and clearance measurements. Tools required include an engine turning tool, various timing pins, sockets, and dial indicators for checking specifications.
Caterpillar cat 312 e l excavator (prefix wey) service repair manual (wey0000...fjjsekdmme
This document provides instructions for removing and installing the front gear group on a C4.4 engine. The removal procedure involves locking the crankshaft, fuel injection pump, and camshaft in position using timing pins. Components like the idler gears, camshaft gear, and housing bearing are then removed. Installation follows the reverse order, with lubrication of parts and verification of proper timing and clearance measurements. Tools required include an engine turning tool, various timing pins, sockets, and dial indicators for checking specifications.
Caterpillar cat 312 e excavator (prefix wey) service repair manual (wey00001 ...fhsjejkdmem
This document provides instructions for removing and installing the front gear group of a C4.4 engine. It lists the required tools and gives step-by-step directions including removing covers, locking the camshaft and fuel pump gears, and marking gear alignments. The removal process involves loosening rocker arms, locking the crankshaft, and removing individual gears and hubs. Installation is the reverse of removal and includes cleaning, inspecting, and applying lubricants to components.
Caterpillar cat 312 e l excavator (prefix wey) service repair manual (wey0000...fhsjejkdmem
This document provides instructions for removing and installing the front gear group on a C4.4 engine. The removal procedure involves locking the crankshaft, fuel injection pump, and camshaft in position using timing pins. Components like the idler gears, camshaft gear, and housing bearing are then removed. Installation follows the reverse order, with lubrication of parts and verification of proper timing and clearance measurements. Tools required include an engine turning tool, various timing pins, sockets, and dial indicators for checking specifications.
Caterpillar cat 312 e l excavator (prefix wey) service repair manual (wey0000...fjjskekdmmse
This document provides instructions for removing and installing the front gear group on a 312E or 312E L excavator with a C4.4 engine. The removal procedure involves locking the crankshaft and fuel injection pump positions, loosening the rocker arms, and removing gears and hubs. The installation procedure gives steps to clean and inspect parts, install bearings and gears in correct positions, check gear mesh and end play, and tighten bolts to specified torques. Tools and torque specifications are provided in tables.
Caterpillar Cat 312E and 312E L Excavator (Prefix WEY) Service Repair Manual ...fijsekkdmdm2w
This document provides instructions for removing and installing the front gear group on a C4.4 engine. The removal procedure involves locking the crankshaft, fuel injection pump, and camshaft in position using timing pins. Components like the idler gears, camshaft gear, and housing bearing are then removed. Installation follows the reverse order, with lubrication of parts and verification of proper timing and clearance measurements. Tools required include an engine turning tool, various timing pins, sockets, and dial indicators for checking specifications.
Caterpillar Cat 312E and 312E L Excavator (Prefix WEY) Service Repair Manual ...zan2736ban
This document provides instructions for removing and installing the front gear group of a C4.4 engine. It lists the required tools and gives step-by-step directions including removing covers, locking the camshaft and fuel pump gears, and marking gear alignments. The removal process involves loosening rocker arms, locking the crankshaft, and removing individual gears and hubs. Installation is the reverse of removal and includes cleaning, inspecting, and applying lubricants to components.
Caterpillar cat 312 e excavator (prefix wey) service repair manual (wey00001 ...idkkddmmd1
This document provides instructions for removing and installing the front gear group of a C4.4 engine. It lists the required tools and gives step-by-step directions including removing covers, locking the camshaft and fuel pump gears, and removing individual gears and housings. The installation section lists the same required tools and outlines cleaning and inspecting parts before reversing the removal steps to reinstall the gear group.
Kubota b6100 hst e tractor parts catalogue manualfhsjejkdmem
The document provides instructions for parts books, including definitions of column headings in parts number pages and notes about country codes. It then lists parts for a B6100HST-E tractor engine and related systems, including the crankcase, cylinder head, gear case, and bearing case. Each part listing includes the part number, description, quantity used, applicable serial number range, interchangeability, and remarks.
Krupp hydraulic hammers hm 1000 1000 marathon service repair manualfhsjejkdmem
This repair manual provides instructions for dismantling and repairing the Krupp HM 1000 hydraulic hammer. It details the necessary tools and safety precautions. Dismantling begins by removing the working tool, then the percussion mechanism, high-pressure accumulator, valves, cylinder cover, and other internal components.
Komatsu wd600 6 wheel dozer service repair manual (sn 55001 and up)fhsjejkdmem
This document provides a table of contents for a shop manual covering maintenance and repair of a WD600-6 wheel dozer. The table of contents lists over 100 sections organized into categories such as specifications, engine and cooling systems, power train, steering, brakes, hydraulics, electrical systems, and troubleshooting. It provides an overview of the technical information and procedures contained in the full shop manual.
Komatsu sk1026 5 n skid steer loader service repair manual (sn a80001 and up)fhsjejkdmem
- The document is a shop manual for the SK1026-5N skid steer loader. It provides information on maintenance, repair, testing and safety for the loader.
- The manual is divided into sections covering general information, structure and maintenance, specifications, testing, troubleshooting, disassembly/assembly, and diagrams.
- Safety is emphasized throughout and special symbols are used to mark important safety information. Proper use of tools, lifting equipment, and following safety procedures are stressed.
The document is a shop manual that provides instructions for removing and installing the engine hood and tilting the cab of a SK1026-5 turbo skid-steer loader. It describes loosening screws and removing parts to detach the hood and cab. Safety precautions and proper hoisting techniques are emphasized. Detailed steps and diagrams are provided to correctly complete the removal and installation processes.
More Related Content
Similar to Caterpillar cat 312 e l excavator (prefix pzl) service repair manual (pzl00001 and up)
This document provides instructions for removing and installing the front gear group on Caterpillar C4.4 engines. The removal procedure involves locking the crankshaft, camshaft, and fuel injection pump positions using timing pins. Components like the idler gears, camshaft gear, and housing bearing are then removed. Installation follows the reverse order, with lubrication of gears and checking of timing, backlash, and end play measurements upon completion. Tools and torque specifications are provided.
Caterpillar cat 312 e l excavator (prefix pzl) service repair manual (pzl0000...idkkddmmd1
This document provides instructions for removing and installing the front gear group on a Caterpillar 312E or 312E L excavator engine. The removal procedure involves using tools to lock the crankshaft, camshaft, and fuel injection pump in position before loosening threaded inserts on the rocker arms. Several gears and other components are then removed from the front of the engine housing. The installation procedure outlines cleaning and inspecting parts before reinstalling components in reverse order, maintaining proper positioning and locking of internal components.
This document provides instructions for removing and installing the front gear group on Caterpillar C4.4 engines. The removal procedure involves locking the crankshaft, camshaft, and fuel injection pump in position using timing pins. Components like the idler gears, camshaft gear, and housing bearing are then removed. Installation follows the reverse order, with lubrication of gears and checking of timing, backlash, and end play measurements upon completion. Tools and torque specifications are provided.
Caterpillar cat 312 e excavator (prefix pzl) service repair manual (pzl00001 ...idkkddmmd1
This document provides instructions for removing and installing the front gear group on a Caterpillar 312E or 312E L excavator engine. The removal procedure involves using tools to lock the crankshaft, camshaft, and fuel injection pump in position before loosening threaded inserts on the rocker arms. Several gears and other components are then removed from the front of the engine housing. The installation procedure outlines cleaning and inspecting parts before reinstalling components in reverse order, maintaining proper positioning and locking of internal components.
This document provides instructions for removing and installing the front gear group on Caterpillar C4.4 engines. The removal procedure involves locking the crankshaft, camshaft, and fuel injection pump in position using timing pins. Components like the idler gears, camshaft gear, and housing bearing are then removed. Installation follows the reverse order, with lubrication of gears and checking of timing, backlash, and end play measurements upon completion. Tools and torque specifications are provided.
This document provides instructions for removing and installing the front gear group on a Caterpillar 312E or 312E L excavator engine. The removal procedure involves using tools to lock the crankshaft, camshaft, and fuel injection pump in position before loosening threaded inserts on the rocker arms. Several gears and other components are then removed from the front of the engine housing. The installation procedure outlines cleaning and inspecting parts before reinstalling components in reverse order, maintaining proper positioning and locking of internal components.
This document provides instructions for removing and installing the front gear group on Caterpillar C4.4 engines. The removal procedure involves locking the crankshaft, camshaft, and fuel injection pump positions using timing pins. Components like the idler gears, camshaft gear, and housing bearing are then removed. Installation follows the reverse order, with lubrication of gears and checking of timing, backlash, and end play measurements upon completion. Tools and torque specifications are provided.
This document provides instructions for removing and installing the front gear group on Caterpillar C4.4 engines. The removal procedure involves locking the crankshaft, camshaft, and fuel injection pump positions using timing pins. Components like the idler gears, camshaft gear, and housing bearing are then removed. Installation follows the reverse order, with lubrication of gears and checking of timing, backlash, and end play measurements upon completion. Tools and torque specifications are provided.
Caterpillar cat 312 e l excavator (prefix pzl) service repair manual (pzl0000...fjjskekdmmse
This document provides instructions for removing and installing the front gear group on a 312E or 312E L excavator with a C4.4 engine. The key steps include:
1. Locking the crankshaft and fuel injection pump gear in position using timing pins.
2. Loosening the rocker arm inserts to fully close the valves.
3. Removing the camshaft, idler, and housing gears in the proper order while maintaining timing marks.
4. Cleaning and inspecting components before installing in reverse order while checking gear mesh and end play/backlash specifications.
Caterpillar cat 312 e excavator (prefix wey) service repair manual (wey00001 ...fjjsekdmme
This document provides instructions for removing and installing the front gear group on a C4.4 engine. The removal procedure involves locking the crankshaft, fuel injection pump, and camshaft in position using timing pins. Components like the idler gears, camshaft gear, and housing bearing are then removed. Installation follows the reverse order, with lubrication of parts and verification of proper timing and clearance measurements. Tools required include an engine turning tool, various timing pins, sockets, and dial indicators for checking specifications.
Caterpillar cat 312 e l excavator (prefix wey) service repair manual (wey0000...fjjsekdmme
This document provides instructions for removing and installing the front gear group on a C4.4 engine. The removal procedure involves locking the crankshaft, fuel injection pump, and camshaft in position using timing pins. Components like the idler gears, camshaft gear, and housing bearing are then removed. Installation follows the reverse order, with lubrication of parts and verification of proper timing and clearance measurements. Tools required include an engine turning tool, various timing pins, sockets, and dial indicators for checking specifications.
Caterpillar cat 312 e excavator (prefix wey) service repair manual (wey00001 ...fhsjejkdmem
This document provides instructions for removing and installing the front gear group of a C4.4 engine. It lists the required tools and gives step-by-step directions including removing covers, locking the camshaft and fuel pump gears, and marking gear alignments. The removal process involves loosening rocker arms, locking the crankshaft, and removing individual gears and hubs. Installation is the reverse of removal and includes cleaning, inspecting, and applying lubricants to components.
Caterpillar cat 312 e l excavator (prefix wey) service repair manual (wey0000...fhsjejkdmem
This document provides instructions for removing and installing the front gear group on a C4.4 engine. The removal procedure involves locking the crankshaft, fuel injection pump, and camshaft in position using timing pins. Components like the idler gears, camshaft gear, and housing bearing are then removed. Installation follows the reverse order, with lubrication of parts and verification of proper timing and clearance measurements. Tools required include an engine turning tool, various timing pins, sockets, and dial indicators for checking specifications.
Caterpillar cat 312 e l excavator (prefix wey) service repair manual (wey0000...fjjskekdmmse
This document provides instructions for removing and installing the front gear group on a 312E or 312E L excavator with a C4.4 engine. The removal procedure involves locking the crankshaft and fuel injection pump positions, loosening the rocker arms, and removing gears and hubs. The installation procedure gives steps to clean and inspect parts, install bearings and gears in correct positions, check gear mesh and end play, and tighten bolts to specified torques. Tools and torque specifications are provided in tables.
Caterpillar Cat 312E and 312E L Excavator (Prefix WEY) Service Repair Manual ...fijsekkdmdm2w
This document provides instructions for removing and installing the front gear group on a C4.4 engine. The removal procedure involves locking the crankshaft, fuel injection pump, and camshaft in position using timing pins. Components like the idler gears, camshaft gear, and housing bearing are then removed. Installation follows the reverse order, with lubrication of parts and verification of proper timing and clearance measurements. Tools required include an engine turning tool, various timing pins, sockets, and dial indicators for checking specifications.
Caterpillar Cat 312E and 312E L Excavator (Prefix WEY) Service Repair Manual ...zan2736ban
This document provides instructions for removing and installing the front gear group of a C4.4 engine. It lists the required tools and gives step-by-step directions including removing covers, locking the camshaft and fuel pump gears, and marking gear alignments. The removal process involves loosening rocker arms, locking the crankshaft, and removing individual gears and hubs. Installation is the reverse of removal and includes cleaning, inspecting, and applying lubricants to components.
Caterpillar cat 312 e excavator (prefix wey) service repair manual (wey00001 ...idkkddmmd1
This document provides instructions for removing and installing the front gear group of a C4.4 engine. It lists the required tools and gives step-by-step directions including removing covers, locking the camshaft and fuel pump gears, and removing individual gears and housings. The installation section lists the same required tools and outlines cleaning and inspecting parts before reversing the removal steps to reinstall the gear group.
Similar to Caterpillar cat 312 e l excavator (prefix pzl) service repair manual (pzl00001 and up) (17)
Kubota b6100 hst e tractor parts catalogue manualfhsjejkdmem
The document provides instructions for parts books, including definitions of column headings in parts number pages and notes about country codes. It then lists parts for a B6100HST-E tractor engine and related systems, including the crankcase, cylinder head, gear case, and bearing case. Each part listing includes the part number, description, quantity used, applicable serial number range, interchangeability, and remarks.
Krupp hydraulic hammers hm 1000 1000 marathon service repair manualfhsjejkdmem
This repair manual provides instructions for dismantling and repairing the Krupp HM 1000 hydraulic hammer. It details the necessary tools and safety precautions. Dismantling begins by removing the working tool, then the percussion mechanism, high-pressure accumulator, valves, cylinder cover, and other internal components.
Komatsu wd600 6 wheel dozer service repair manual (sn 55001 and up)fhsjejkdmem
This document provides a table of contents for a shop manual covering maintenance and repair of a WD600-6 wheel dozer. The table of contents lists over 100 sections organized into categories such as specifications, engine and cooling systems, power train, steering, brakes, hydraulics, electrical systems, and troubleshooting. It provides an overview of the technical information and procedures contained in the full shop manual.
Komatsu sk1026 5 n skid steer loader service repair manual (sn a80001 and up)fhsjejkdmem
- The document is a shop manual for the SK1026-5N skid steer loader. It provides information on maintenance, repair, testing and safety for the loader.
- The manual is divided into sections covering general information, structure and maintenance, specifications, testing, troubleshooting, disassembly/assembly, and diagrams.
- Safety is emphasized throughout and special symbols are used to mark important safety information. Proper use of tools, lifting equipment, and following safety procedures are stressed.
The document is a shop manual that provides instructions for removing and installing the engine hood and tilting the cab of a SK1026-5 turbo skid-steer loader. It describes loosening screws and removing parts to detach the hood and cab. Safety precautions and proper hoisting techniques are emphasized. Detailed steps and diagrams are provided to correctly complete the removal and installation processes.
Komatsu sk820 5 n skid steer loader service repair manual (sn a40001 and up)fhsjejkdmem
1. Raise the working equipment and secure it. Remove the footrest and engine hood.
2. Loosen screws to raise the cab as far as safety cables allow and insert a safety pin.
3. Disconnect pipes and cables from the engine if removing it. Mark tubes to avoid mixing up.
4. Attach hoisting tackle to the cab. Remove safety pins and cables, and pins from dumper hooks.
5. Tilt the cab onto a stand so it clears the machine, being careful not to strain connecting cables.
Komatsu sk815 5 na skid steer loader service repair manual (sn a10001 and up)fhsjejkdmem
This document is a shop manual for Komatsu SK815-5N and SK815-5NA skid steer loaders. It provides information on safety procedures, machine specifications, maintenance standards, troubleshooting guides, and instructions for disassembly and assembly. The manual is divided into several sections covering general information, structure and maintenance, standard values, testing and adjusting procedures, disassembly and assembly, and diagrams. Komatsu policies for improving products and revising manuals are also outlined. Precautions are given for safe work practices when servicing equipment.
Komatsu sk815 5 n skid steer loader service repair manual (sn a30001 and up)fhsjejkdmem
This document is a shop manual for Komatsu SK815-5N and SK815-5NA skid steer loaders. It provides information on safety procedures, machine specifications, maintenance standards, troubleshooting guides, and instructions for disassembly and assembly. The manual is divided into several sections covering general information, structure and maintenance, standard values, testing and adjusting procedures, disassembly and assembly, and diagrams. Komatsu aims to improve its products over time and updates shop manuals with revisions. Proper use of this manual can aid technicians in safely and effectively servicing these skid steer loaders.
This document provides shop manual instructions for adjusting valve clearance on Komatsu skid-steer loaders models SK714-5, SK815-5, and SK815-5 turbo. The instructions include removing covers to access the valves, rotating the drive shaft to specific positions, checking valve clearance with feeler gauges, adjusting clearance by turning screws, and reassembling covers. Clearance specifications and tightening torques are provided. The document also provides a zero setting procedure for the SK815-5 turbo model before performing the clearance adjustment.
Komatsu sk815 5 skid steer loader service repair manual (sn 37 bf00902 and up)fhsjejkdmem
This document provides shop manual instructions for adjusting valve clearance on Komatsu skid-steer loaders models SK714-5, SK815-5, and SK815-5 turbo. The instructions include removing covers to access the valves, rotating the drive shaft to specific positions, checking valve clearance with feeler gauges, adjusting clearance by turning screws, and reassembling covers. Clearance specifications and tightening torques are provided. The document also provides a zero setting procedure for the SK815-5 turbo model before performing the clearance adjustment.
Komatsu sk714 5 skid steer loader service repair manual (sn 37 af01876 and up)fhsjejkdmem
This document provides shop manual instructions for adjusting valve clearance on Komatsu skid-steer loaders models SK714-5, SK815-5, and SK815-5 turbo. The instructions include removing covers to access the valves, rotating the drive shaft to specific positions, checking valve clearance with feeler gauges, adjusting clearance by turning screws, and reassembling covers. Clearance specifications and tightening torques are provided. The document also provides a zero setting procedure for the SK815-5 turbo model before performing the clearance adjustment.
Komatsu ck35 1 skid steer loader service repair manual (sn f00003 and up)fhsjejkdmem
This document provides an overview and safety instructions for operating a CK35-1 Crawler Skid-Steer Loader. It contains the following key points:
1. The document outlines general safety precautions that should be followed when operating or servicing the CK35-1, including wearing proper protective equipment and following safety procedures.
2. Instructions are provided for preparing to work on the CK35-1, such as parking it securely, lowering attachments, and locking controls.
3. The document describes safety precautions that should be followed when working on the machine, such as releasing pressure from systems before disconnecting components and avoiding burns from hot fluids.
Komatsu ck30 1 skid steer loader service repair manual (sn f00003 and up)fhsjejkdmem
This document provides safety information and instructions for servicing a CK30-1 crawler skid-steer loader. It contains sections on structure and function, testing and adjusting, removal and installation, maintenance standards, and other topics. The safety section emphasizes preparing the work area safely, using proper protective equipment, lowering equipment before working on it, following instructions carefully, and other precautions to prevent injury while servicing the loader.
Komatsu ck30 1 skid steer loader service repair manual (sn a30001 and up)fhsjejkdmem
This document is a shop manual for the Komatsu CK30-1 compact track loader. It provides instructions and specifications for testing, repairing, removing, and installing components of the CK30-1. The manual contains sections on structure and function, testing and adjusting, removal and installation, maintenance standards, and other topics. It provides safety precautions, instructions for preparing the machine for work, and guidelines for hoisting heavy parts safely. Standard tightening torques are also included as a reference.
Komatsu ck20 1 skid steer loader service repair manualfhsjejkdmem
This document provides instructions for removing and installing a cab on a CK20-1 crawler skid-steer loader. The key steps include:
1. Lowering the working equipment and stopping the engine before removal. Disconnecting hydraulic lines and electrical connections.
2. Connecting the cab to lifting equipment and removing retaining pins and safety cables to lift the cab off the loader frame.
3. Reversing the process to reinstall the cab, making sure to reconnect all lines and adjust control linkages properly. Safety and proper connection of all parts is emphasized.
John deere chainsaws cs40 service repair manualfhsjejkdmem
This technical manual provides specifications and information for John Deere chainsaws models CS36, CS40, CS46, CS52, CS56, CS62, CS71, and CS81. It includes the following sections:
- Fastener torque values for metric and inch fasteners
- General information about 2-cycle engines, gasoline storage, oil types, and identification numbers
- Table of contents that lists additional sections covering topics like components, schematics, theory of operation, testing, repair, and specifications.
John deere chainsaws cs36 service repair manualfhsjejkdmem
This technical manual provides specifications and information for John Deere chainsaws models CS36, CS40, CS46, CS52, CS56, CS62, CS71, and CS81. It includes the following sections:
- Fastener torque values for metric and inch fasteners
- General information about 2-cycle engines, gasoline storage, oil types, and identification numbers
- Table of contents that lists additional sections covering topics like components, schematics, theory of operation, testing, repair, and specifications.
John deere amt626 all material transporters service repair manualfhsjejkdmem
This document provides safety information and instructions for working on and around All Material Transporters. It describes proper procedures for safely handling batteries, chemicals, fluids and working on raised or jacked up equipment. Specific hazards from poisonous acids, fires, explosions and loud noises are explained as well as recommended safety equipment like gloves, eye protection and hearing protection. Emergency response steps are outlined for acid splashes or chemical exposures.
John deere amt622 all material transporters service repair manualfhsjejkdmem
This document provides safety information and instructions for working on and around All Material Transporters. It describes proper procedures for safely handling batteries, chemicals, fluids and working on raised or jacked up equipment. Specific hazards from poisonous acids, fires, explosions and loud noises are explained as well as recommended safety equipment like gloves, eye protection and hearing protection. Emergency response steps are outlined for acid splashes or chemical exposures.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
2. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 312E EXCAVATOR PZL
Configuration: 312E & 312E L Excavators PZL00001-UP (MACHINE) POWERED BY C4.4 Engine
Disassembly and Assembly
C4.4 Engines for Caterpillar Built Machines
Media Number -UENR0602-11 Publication Date -01/08/2013 Date Updated -25/10/2017
i04048571
Gear Group (Front) - Remove and Install - Heavy Duty Gear
Group (Front)
SMCS - 1206-010
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
9U-7336 Housing 1
5P-7305 Engine Turning Tool 1
B 230-6284 Timing Pin (Camshaft) 1
C 364-9107
Timing Pin
(Fuel Injection Pump)
1
D
136-4632 Timing Pin (Crankshaft) 1
268-1966 Adapter 1
E 298-5564 T40Torx Socket 1
Start By:
a. Remove the front cover. Refer to Disassembly and Assembly, "Front Cover - Remove and
Install" for the correct procedure.
b. Remove the valve mechanism cover. Refer to Disassembly and Assembly, "Valve
Mechanism Cover - Remove and Install" for the correct procedure.
NOTICE
1/20
312E & 312E L Excavators PZL00001-UP (MACHINE) POWERED BY C4.4 Engine...
2020/6/10
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Dispose of all fluids according to local regulations and mandates.
Note: Care must be taken in order to ensure that the fuel injection pump timing is not lost during
the removal of the front gear group. Carefully follow the procedure in order to remove the gear
group.
1. If the air compressor is equipped with a hydraulic pump, remove the hydraulic pump. Refer
to Original Equipment Manufactures (OEM) for the correct procedure.
2. If the engine is equipped with an air compressor, remove the air compressor. Refer to
Disassembly and Assembly, "Air Compressor - Remove" for the correct procedure.
3. If the engine is equipped with only a hydraulic pump, remove the hydraulic pump. Refer to
OEM for the correct procedure.
4. Use Tooling (A) in order to rotate the crankshaft so that number one piston is at top dead
center on the compression stroke. Refer to System Operation, Testing and Adjusting,
"Finding Top Center Position for No.1 Piston" for the correct procedure.
Note: Do not use excessive force to install Tooling (D). Do not use Tooling (D) to hold the
crankshaft during repairs.
2/20
312E & 312E L Excavators PZL00001-UP (MACHINE) POWERED BY C4.4 Engine...
2020/6/10
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. Illustration 1 g02486477
5. Remove plug (1) from the cylinder block. Remove O-ring seal (2) from the plug.
6. Use Tooling (A) in order to rotate the crankshaft so that number one piston is at top dead
center on the compression stroke. Refer to System Operation, Testing and Adjusting,
"Finding Top Center Position for No.1 Piston" for the correct procedure. Install Tooling (D)
through Hole (W) in order to lock the crankshaft so that number one piston is at top dead
center on the compression stroke.
7. Remove Tooling (D).
8. Use Tooling (A) in order to rotate the crankshaft in a clockwise direction and position the
crankshaft at the safe position. Refer to System Operation, Testing and Adjusting, "Position
the Valve Mechanism Before Maintenance Procedures" for the correct procedure.
3/20
312E & 312E L Excavators PZL00001-UP (MACHINE) POWERED BY C4.4 Engine...
2020/6/10
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. Illustration 2 g02048655
9. Use Tooling (E) in order to loosen threaded inserts (4) on all rocker arms (3). Unscrew
threaded inserts (4) on all rocker arms (3) until all valves are fully closed. Ensure that the
guides (5) for the pushrods are left in position on the threaded inserts (4).
Note: Ensure that ALL threaded inserts are fully unscrewed.
10. Use Tooling (A) in order to rotate the crankshaft so that number one piston is at top dead
center on the compression stroke. Refer to System Operation, Testing and Adjusting,
"Finding Top Center Position for No.1 Piston" for the correct procedure. Install Tooling (D)
through Hole (W) in order to lock the crankshaft so that number one piston is at top dead
center on the compression stroke. Refer to Illustration 1.
4/20
312E & 312E L Excavators PZL00001-UP (MACHINE) POWERED BY C4.4 Engine...
2020/6/10
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. Illustration 3 g02488136
11. Install Tooling (B) through Hole (X) in camshaft gear (6) into the front housing. Use
Tooling (B) in order to lock the camshaft in the correct position. Refer to System Operation,
Testing and Adjusting, "Finding Top Center Position for No.1 Piston" for the correct
procedure.
12. Use Tooling (C) in order to lock the fuel injection pump gear in the correct position. Refer
to Disassembly and Assembly, "Fuel Injection Pump - Remove" for the correct procedure.
5/20
312E & 312E L Excavators PZL00001-UP (MACHINE) POWERED BY C4.4 Engine...
2020/6/10
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. Illustration 4 g02052394
13. If the right-hand side of the engine is equipped with a hydraulic pump, remove the hydraulic
pump. Refer to OEM for the correct procedure.
14. If necessary, remove bolts (7) from plate (8). Remove plate (8) and remove O-ring seal (9).
15. Remove circlip (10) and remove gear assembly (11) from front housing (12).
6/20
312E & 312E L Excavators PZL00001-UP (MACHINE) POWERED BY C4.4 Engine...
2020/6/10
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. Illustration 5 g02053673
16. If necessary, follow Step 16.a through Step 16.b in order to disassemble gear assembly (11).
a. Remove circlip (13) from gear assembly (11).
b. Place gear assembly (11) on a suitable support. Press bearing (14) from gear (15).
7/20
312E & 312E L Excavators PZL00001-UP (MACHINE) POWERED BY C4.4 Engine...
2020/6/10
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. Illustration 6 g02048714
17. Mark gear (6), gear (16), gear (17) and gear (18) in order to show alignment. Refer to
Illustration 6.
Note: Identification will ensure that the gears can be installed in the original alignment.
18. Remove camshaft gear (6). Refer to Disassembly and Assembly, "Camshaft Gear - Remove
and Install" for the correct procedure.
8/20
312E & 312E L Excavators PZL00001-UP (MACHINE) POWERED BY C4.4 Engine...
2020/6/10
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. Illustration 7 g02053984
19. Remove bolts (22) and bolts (24).
20. Remove tube assembly (23) from idler gear (16) and idler gear (26).
21. Remove plate (21).
22. Remove idler gear (16) from hub (20) (not shown).
23. Remove idler gear (26) and idler gear hub (25) from front housing (12).
24. Remove hub (20) (not shown) from front housing (12).
25. If necessary, remove bearing (19) from front housing (12). Refer to Disassembly and
Assembly, "Housing (Front) - Remove" for the correct procedure.
Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A
9U-7336 Housing 1
5P-7305 Engine Turning Tool 1
9/20
312E & 312E L Excavators PZL00001-UP (MACHINE) POWERED BY C4.4 Engine...
2020/6/10
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. B 230-6284 Timing Pin (Camshaft) 1
C 364-9107 Timing Pin(Fuel Injection Pump) 1
D
136-4632 Timing Pin (Crankshaft) 1
268-1966 Adapter 1
E 298-5564 T40Torx Socket 1
F 207-1601 Rubber Lubricant 1
G 7M-7456 Bearing Mount Compound 1
H
9U-7324 Indicator Bracket 1
7H-1942 Dial Indicator 1
3S-3268 Indicator Contact Point 1
7H-1940 Universal Attachment 1
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Note: The fuel injection pump must remain locked until the procedure instructs you to unlock the
fuel injection pump.
1. Ensure that number one piston is at top dead center on the compression stroke. Refer to
System Operation, Testing and Adjusting, "Finding Top Center Position for No.1 Piston"
for the correct procedure.
10/20
312E & 312E L Excavators PZL00001-UP (MACHINE) POWERED BY C4.4 Engi...
2020/6/10
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. Illustration 8 g02488176
2. If necessary, install Tooling (D) into Hole (W) in the cylinder block. Use Tooling (D) in
order to lock the crankshaft in the correct position. Refer to System Operation, Testing and
Adjusting, "Finding Top Center Position for No.1 Piston" for the correct procedure.
Note: Do not use excessive force to install Tooling (D). Do not use Tooling (D) to hold the
crankshaft during repairs.
3. Ensure that all of the components of the front gear group are clean and free from wear and
damage. If necessary, replace any components that are worn or damaged.
11/20
312E & 312E L Excavators PZL00001-UP (MACHINE) POWERED BY C4.4 Engi...
2020/6/10
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. Illustration 9 g02048660
12/20
312E & 312E L Excavators PZL00001-UP (MACHINE) POWERED BY C4.4 Engi...
2020/6/10
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. Illustration 10 g02053693
4. If necessary, Install bearing (19) to front housing (12). Refer to Disassembly and Assembly,
"Housing (Front) - Install" for the correct procedure.
5. Install hub (20) to the recess of front housing (12). Ensure that the oil Hole (Y) is to the top
of the hub.
6. Ensure that the fuel injection pump is locked in the correct position. Refer to Disassembly
and Assembly, "Fuel Injection Pump - Install" for the correct procedure.
7. Lubricate idler hub (20) with clean engine lubricating oil. Install idler gear (16) to the idler
hub. Ensure that the timing marks are toward the front of the idler gear. Align timing marks
on idler gear (16) with gear (17) and gear (18).
8. Lubricate idler gear hub (25) with clean engine lubricating oil and install idler gear (26) to
the idler gear hub. Install the assembly for idler gear (26) to front housing (12).
Note: Ensure that the idler gear hub and the idler gear are correctly aligned.
9. Position plate (21) onto idler gear (16).
Note: Ensure that the identification mark TOP is upward.
10. Position tube assembly (23) onto idler gear (16) and idler gear (26). Install bolts (22) and
bolts (24).
Note: Ensure that the tube is correctly positioned on the hubs of the idler gears.
13/20
312E & 312E L Excavators PZL00001-UP (MACHINE) POWERED BY C4.4 Engi...
2020/6/10
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. 11. Tighten bolts (22) and bolts (24) to a torque of 44 N·m (32 lb ft).
Illustration 11 g02488178
14/20
312E & 312E L Excavators PZL00001-UP (MACHINE) POWERED BY C4.4 Engi...
2020/6/10
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. Illustration 12 g02488136
12. Install camshaft gear (6). Loosely install bolt (28) and washer (27) for the camshaft gear.
Refer to Disassembly and Assembly, "Camshaft Gear - Remove and Install" for the correct
procedure.
13. Install Tooling (B) through Hole (X) in camshaft gear (6) into the front housing.
15/20
312E & 312E L Excavators PZL00001-UP (MACHINE) POWERED BY C4.4 Engi...
2020/6/10
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. Illustration 13 g02488216
14. Ensure that the timing marks on gear (6), gear (16), gear (17) and gear (18) are in alignment
and that the mesh of the gears is correct.
15. Remove Tooling (B), Tooling (C), and Tooling (D).
16. When bolt (28) is a 8.8 Grade. Tighten bolt (28) for camshaft gear (6) to a torque of 95 N·m
(70 lb ft).
When bolt (28) is a 10.9 Grade. Tighten bolt (28) to a torque of 120 N·m (89 lb ft).
17. Use Tool (H) in order to check the end play of the camshaft gear. Refer to Specifications,
"Camshaft" for more information.
18. Use Tool (H) in order to check the end play of the idler gears. Refer to Specifications, "Gear
Group (Front)" and refer to Disassembly and Assembly, "Idler Gear - Remove and Install"
for further information.
19. Use Tooling (H) in order to measure the backlash for gear (6), gear (16), gear (17) and gear
(16). Refer to Specifications, "Gear Group (Front)" for further information.
16/20
312E & 312E L Excavators PZL00001-UP (MACHINE) POWERED BY C4.4 Engi...
2020/6/10
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. Illustration 14 g02058193
20. If necessary, follow Step 20.a through Step 20.c in order to assemble gear assembly (10).
a. Apply a small continuous bead of Tooling (G) to inner Surface (Z) of bearing (14).
Place the inner race of bearing (14) onto a suitable support. Press the shaft of gear
(15) into bearing (14) until the shoulder of the gear is against the bearing. Remove
any excess bearing mount compound.
b. Install circlip (13) to gear assembly (11).
c. Lightly lubricate bearing (14) and gear assembly (11) with clean lubricating oil.
17/20
312E & 312E L Excavators PZL00001-UP (MACHINE) POWERED BY C4.4 Engi...
2020/6/10
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
19. Illustration 15 g02052394
21. Install gear assembly (11) to front housing (12). Ensure that the shaft of gear assembly (11)
is correctly aligned with the bearing in front housing (12).
22. Install circlip (10) to front housing (12).
Note: Ensure that the circlip is correctly located in the front housing.
23. Ensure that there is tactile backlash between the camshaft gear and the accessory drive gear.
24. If the right-hand side of the engine is equipped with a hydraulic pump, install the hydraulic
pump. Refer to OEM for the correct procedure.
25. If necessary, lightly lubricate a new O-ring seal (9) with Tooling (F). Install new O-ring seal
(9) to plate (8). Install plate (8) to front housing (12).
26. Install bolts (7) to plate (8). Tighten the bolts to a torque of 10 N·m (88 lb in).
27. Lubricate each gear with clean engine oil.
NOTICE
Failure to ensure that the crankshaft is positioned at the safe position
will result in interference between the pistons and the valves.
18/20
312E & 312E L Excavators PZL00001-UP (MACHINE) POWERED BY C4.4 Engi...
2020/6/10
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
20. Interference between the pistons and the valves will result in damage to
the engine.
28. Use Tooling (A) in order to rotate the crankshaft in a clockwise direction and position the
crankshaft at the safe position. Refer to System Operation, Testing and Adjusting, "Position
the Valve Mechanism Before Maintenance Procedures" for the correct procedure.
Illustration 16 g02048655
29. Ensure that the guides (5) for the pushrods are correctly positioned on the threaded inserts
(4). Use Tooling (E) in order to tighten threaded inserts (4) on all rocker arms (3). Tighten
the threaded inserts to a torque of 30 N·m (265 lb in).
Note: When the threaded insert is tightened, the threaded insert must be correctly seated
into the cup for the pushrod.
30. If the engine is equipped with an air compressor, install the air compressor. Refer to
Disassembly and Assembly, "Air Compressor - Install" for the correct procedure.
31. If the air compressor is equipped with a hydraulic pump, install the hydraulic pump. Refer
to OEM for the correct procedure.
32. If the engine is equipped only with a hydraulic pump, install the hydraulic pump. Refer to
OEM for the correct procedure.
19/20
312E & 312E L Excavators PZL00001-UP (MACHINE) POWERED BY C4.4 Engi...
2020/6/10
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
21. 33. The engine should not be operated for a period 30 minutes after the threaded inserts on all
the rocker arms have been tightened. This period of time will allow the hydraulic lifters to
purge off excessive engine oil from the hydraulic lifters.
End By:
a. Install the front cover. Refer to Disassembly and Assembly, "Front Cover - Remove and
Install" for the correct procedure.
b. Install the valve mechanism cover. Refer to Disassembly and Assembly, "Valve Mechanism
Cover - Remove and Install" for the correct procedure.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Wed Jun 10 23:31:50 UTC+0800 2020
20/20
312E & 312E L Excavators PZL00001-UP (MACHINE) POWERED BY C4.4 Engi...
2020/6/10
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
22. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 312E EXCAVATOR PZL
Configuration: 312E & 312E L Excavators PZL00001-UP (MACHINE) POWERED BY C4.4 Engine
Disassembly and Assembly
C4.4 Engines for Caterpillar Built Machines
Media Number -UENR0602-11 Publication Date -01/08/2013 Date Updated -25/10/2017
i04048572
Gear Group (Front) - Remove and Install
SMCS - 1206-010
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
9U-7336 Housing 1
5P-7305 Engine Turning Tool 1
B 230-6284 Timing Pin (Camshaft) 1
C 364-9107
Timing Pin
(Fuel Injection Pump)
1
D
136-4632 Timing Pin (Crankshaft) 1
268-1966 Adapter 1
E 298-5564 T40Torx Socket 1
Start By:
a. Remove the front cover. Refer to Disassembly and Assembly, "Front Cover - Remove and
Install" for the correct procedure.
b. Remove the valve mechanism cover. Refer to Disassembly and Assembly, "Valve
Mechanism Cover - Remove and Install" for the correct procedure.
NOTICE
1/15
312E & 312E L Excavators PZL00001-UP (MACHINE) POWERED BY C4.4 Engine...
2020/6/10
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
23. Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Dispose of all fluids according to local regulations and mandates.
Note: Care must be taken in order to ensure that the fuel injection pump timing is not lost during
the removal of the front gear group. Carefully follow the procedure in order to remove the gear
group.
Illustration 1 g02485936
2/15
312E & 312E L Excavators PZL00001-UP (MACHINE) POWERED BY C4.4 Engine...
2020/6/10
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
24. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
25. 1. Remove plug (1) from the cylinder block. Remove O-ring seal (2) from the plug.
2. Use Tooling (A) in order to rotate the crankshaft so that number one piston is at top dead
center on the compression stroke. Refer to System Operation, Testing and Adjusting,
"Finding Top Center Position for No.1 Piston" for the correct procedure. Install Tooling (D)
through Hole (W) in order to lock the crankshaft so that number one piston is at top dead
center on the compression stroke.
3. Remove Tooling (D).
4. Use Tooling (A) in order to rotate the crankshaft in a clockwise direction and position the
crankshaft at the safe position. Refer to System Operation, Testing and Adjusting, "Position
the Valve Mechanism Before Maintenance Procedures" for the correct procedure.
Illustration 2 g01992077
5. Use Tooling (E) in order to loosen threaded inserts (4) on all rocker arms (3). Unscrew
threaded inserts (4) on all rocker arms (3) until all valves are fully closed. Ensure that the
guides (5) for the pushrods are left in position on the threaded inserts (4).
Note: Ensure that ALL threaded inserts are fully unscrewed.
6. Use Tooling (A) in order to rotate the crankshaft so that number one piston is at top dead
center on the compression stroke. Refer to System Operation, Testing and Adjusting,
"Finding Top Center Position for No.1 Piston" for the correct procedure. Install Tooling (D)
through Hole (W) in order to lock the crankshaft so that number one piston is at top dead
center on the compression stroke. Refer to Illustration 1.
3/15
312E & 312E L Excavators PZL00001-UP (MACHINE) POWERED BY C4.4 Engine...
2020/6/10
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
26. Illustration 3 g02485937
7. Install Tooling (B) through Hole (X) in camshaft gear (6) into the front housing. Use
Tooling (B) in order to lock the camshaft in the correct position. Refer to System Operation,
Testing and Adjusting, "Finding Top Center Position for No.1 Piston" for the correct
procedure.
8. Install Tooling (D) into Hole (W) in the cylinder block. Use Tooling (D) in order to lock the
crankshaft in the correct position. Refer to System Operation, Testing and Adjusting,
"Finding Top Center Position for No.1 Piston" for the correct procedure.
Note: Do not use excessive force to install Tooling (D). Do not use Tooling (D) to hold the
crankshaft during repairs.
9. Use Tooling (C) in order to lock the fuel injection pump gear in the correct position. Refer
to Disassembly and Assembly, "Fuel Injection Pump - Remove" for the correct procedure.
4/15
312E & 312E L Excavators PZL00001-UP (MACHINE) POWERED BY C4.4 Engine...
2020/6/10
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
27. Illustration 4 g01992078
10. Mark gear (6), gear (7), gear (8) and gear (9) in order to show alignment. Refer to
Illustration 4.
Note: Identification will ensure that the gears can be installed in the original alignment.
11. Remove camshaft gear (6). Refer to Disassembly and Assembly, "Camshaft Gear - Remove
and Install" for the correct procedure.
12. Remove idler gear (7). Refer to Disassembly and Assembly, "Idler Gear - Remove and
Install" for the correct procedure.
Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A
9U-7336 Housing 1
5P-7305 Engine Turning Tool 1
B 230-6284 Timing Pin (Camshaft) 1
C 364-9107 1
5/15
312E & 312E L Excavators PZL00001-UP (MACHINE) POWERED BY C4.4 Engine...
2020/6/10
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...