This document provides instructions for disassembling and assembling the components of a 312C excavator's final drive and travel motor systems. It lists the required tools and safety precautions, then outlines a 14-step process for removing the final drive and travel motor. It also details disassembling the travel counterbalance valve in 13 steps and the travel motor in 11 steps. Components are to be marked for reassembly and fluids drained and contained properly.
Caterpillar cat 312 c excavator (prefix fds) service repair manual (fds00001 ...fjsjjekdkme
This document provides disassembly instructions for the 312C and 312C L excavator final drive, travel motor, and travel counterbalance valve systems. It outlines 17 steps to disassemble the final drive which includes removing covers, plates, gears, and bearings. It also details 13 steps to disassemble the travel motor such as removing piston assemblies, seals, and barrel components. Finally, it lists 15 steps for disassembling the travel counterbalance valve including removing springs, spools, valves, and housings. Personal safety notices are included throughout regarding releasing pressures and contained parts.
Caterpillar cat 323 f excavator (prefix mfy) service repair manual (mfy00001 ...jfdskekdmme
This document provides disassembly instructions for a 323F and 323F LN excavator travel motor in 27 steps. It details removing components such as the head assembly, housing assembly, brake piston, friction discs, and rotating group. Proper tooling is required and safety precautions should be followed when releasing spring forces or using pressurized air. The travel motor must be thoroughly cleaned and components reinstalled in their original positions and orientations.
Caterpillar cat 314 e cr excavator (prefix gmd) service repair manual (gmd000...jfdskekdmme
This document provides instructions for disassembling various components of a 314E CR excavator, including the final drive, travel motor, counterbalance valve, and travel motor. It lists the required tools and outlines a step-by-step process for safely removing each part, noting precautions for releasing pressures and contained fluids. Detailed illustrations accompany each step to ensure correct reassembly.
Caterpillar cat 314 e cr excavator (prefix ecn) service repair manual (ecn000...jfdskekdmme
The document provides instructions for removing and installing the front gear group on a Caterpillar C4.4 engine. Key steps include:
1. Locking the crankshaft, camshaft, and fuel injection pump in position using timing pins to maintain proper timing.
2. Removing the idler gear and camshaft gear, taking note of alignment marks for reinstallation.
3. Cleaning and inspecting components, then reinstalling the gears in proper alignment, checking backlash and end play with gauges.
4. Locking components again and tightening fasteners to specification before removing locking pins and returning the valve mechanism to the safe position.
This document provides instructions for disassembling various components of an excavator including the final drive, travel motor, counterbalance valve, and travel motor. It lists required tools and safety precautions and provides a step-by-step process with illustrations for disassembling each component and removing seals, springs, plates, and other parts. Detailed instructions are given for draining fluids and carefully removing heavy components to prepare them for cleaning or replacement.
Caterpillar cat 314 f cr excavator (prefix raf) service repair manual (raf000...jfdskekdmme
This document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 314F excavator. It lists the required tools and outlines 23 steps to disassemble the components, including draining fluids, removing covers, plates, gears, seals, pistons, springs and other parts. Safety notices are included to warn of potential injuries from parts propelled by springs or pressurized hydraulic fluids.
Caterpillar cat 314 e cr excavator (prefix ycw) service repair manual (ycw000...jfdskekdmme
This document provides instructions for removing and installing an engine oil cooler on a Caterpillar C4.4 engine. The removal procedure involves draining coolant, removing mounting bolts and spacers, and removing the oil cooler assembly. The installation procedure specifies cleaning parts and installing the oil cooler assembly with new gaskets and bolts. Tools, safety precautions, and maintenance tips are also provided.
Caterpillar cat 312 c excavator (prefix bnn) service repair manual (bnn00001 ...fjskkksmemm
This document provides instructions for disassembling the final drive, travel motor, and travel counterbalance valve of excavator models 312C and 312C L. It outlines 19 steps to fully disassemble these components, including draining fluids, removing sprockets, valves, plates, seals, springs, and other internal parts. Safety notices are provided throughout to warn of hazards like stored energy, flying parts, and hot or pressurized fluids. Required specialty tools are listed at the beginning.
Caterpillar cat 312 c excavator (prefix fds) service repair manual (fds00001 ...fjsjjekdkme
This document provides disassembly instructions for the 312C and 312C L excavator final drive, travel motor, and travel counterbalance valve systems. It outlines 17 steps to disassemble the final drive which includes removing covers, plates, gears, and bearings. It also details 13 steps to disassemble the travel motor such as removing piston assemblies, seals, and barrel components. Finally, it lists 15 steps for disassembling the travel counterbalance valve including removing springs, spools, valves, and housings. Personal safety notices are included throughout regarding releasing pressures and contained parts.
Caterpillar cat 323 f excavator (prefix mfy) service repair manual (mfy00001 ...jfdskekdmme
This document provides disassembly instructions for a 323F and 323F LN excavator travel motor in 27 steps. It details removing components such as the head assembly, housing assembly, brake piston, friction discs, and rotating group. Proper tooling is required and safety precautions should be followed when releasing spring forces or using pressurized air. The travel motor must be thoroughly cleaned and components reinstalled in their original positions and orientations.
Caterpillar cat 314 e cr excavator (prefix gmd) service repair manual (gmd000...jfdskekdmme
This document provides instructions for disassembling various components of a 314E CR excavator, including the final drive, travel motor, counterbalance valve, and travel motor. It lists the required tools and outlines a step-by-step process for safely removing each part, noting precautions for releasing pressures and contained fluids. Detailed illustrations accompany each step to ensure correct reassembly.
Caterpillar cat 314 e cr excavator (prefix ecn) service repair manual (ecn000...jfdskekdmme
The document provides instructions for removing and installing the front gear group on a Caterpillar C4.4 engine. Key steps include:
1. Locking the crankshaft, camshaft, and fuel injection pump in position using timing pins to maintain proper timing.
2. Removing the idler gear and camshaft gear, taking note of alignment marks for reinstallation.
3. Cleaning and inspecting components, then reinstalling the gears in proper alignment, checking backlash and end play with gauges.
4. Locking components again and tightening fasteners to specification before removing locking pins and returning the valve mechanism to the safe position.
This document provides instructions for disassembling various components of an excavator including the final drive, travel motor, counterbalance valve, and travel motor. It lists required tools and safety precautions and provides a step-by-step process with illustrations for disassembling each component and removing seals, springs, plates, and other parts. Detailed instructions are given for draining fluids and carefully removing heavy components to prepare them for cleaning or replacement.
Caterpillar cat 314 f cr excavator (prefix raf) service repair manual (raf000...jfdskekdmme
This document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 314F excavator. It lists the required tools and outlines 23 steps to disassemble the components, including draining fluids, removing covers, plates, gears, seals, pistons, springs and other parts. Safety notices are included to warn of potential injuries from parts propelled by springs or pressurized hydraulic fluids.
Caterpillar cat 314 e cr excavator (prefix ycw) service repair manual (ycw000...jfdskekdmme
This document provides instructions for removing and installing an engine oil cooler on a Caterpillar C4.4 engine. The removal procedure involves draining coolant, removing mounting bolts and spacers, and removing the oil cooler assembly. The installation procedure specifies cleaning parts and installing the oil cooler assembly with new gaskets and bolts. Tools, safety precautions, and maintenance tips are also provided.
Caterpillar cat 312 c excavator (prefix bnn) service repair manual (bnn00001 ...fjskkksmemm
This document provides instructions for disassembling the final drive, travel motor, and travel counterbalance valve of excavator models 312C and 312C L. It outlines 19 steps to fully disassemble these components, including draining fluids, removing sprockets, valves, plates, seals, springs, and other internal parts. Safety notices are provided throughout to warn of hazards like stored energy, flying parts, and hot or pressurized fluids. Required specialty tools are listed at the beginning.
Caterpillar cat 314 c lcr excavator (prefix kja) service repair manual (kja00...jfdskekdmme
This document provides disassembly instructions for the final drive, travel motor, and other components of a 314C excavator. It lists required tools and outlines over 30 steps to disassemble parts like the final drive, travel motor, counterbalance valve, and planetary gear assemblies. Safety notices are included throughout to warn of hazards like released spring forces and hot or pressurized fluids.
The document provides instructions for removing and installing the idler gear on a C4.4 engine. There are separate procedures for a standard idler gear and a heavy-duty idler gear. The removal procedure involves locking the camshaft and crankshaft, removing mounting bolts, and tilting the gear out of position. The installation procedure involves cleaning and inspecting parts, aligning timing marks, lubricating components, and checking specifications such as end play and backlash. Tools and torque specifications are provided.
Caterpillar cat 312 d l excavator (prefix rhl) service repair manual (rhl0000...pfiskdmjekm
The document provides instructions for removing and installing an idler gear on a Caterpillar C4.2 engine. It describes:
1) Removing the front housing, idler gear bolt and washer, thrust plate, and idler gear from the idler gear shaft.
2) Using a puller tool to remove the idler gear bushing and idler shaft from the cylinder block.
3) Checking the idler shaft for wear and replacing if needed.
4) Measuring gear backlash and end play during installation and comparing to specifications.
Caterpillar cat 314 c excavator (prefix sny) service repair manual (sny00001 ...jfdskekdmme
This document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of 314C and 314C CR excavators. It outlines 16 steps to disassemble the final drive which include removing fittings, bolts, and valves. It then details 14 steps to disassemble the counterbalance valve which involve removing springs, seals, pistons, and spools. Finally, it lists 10 steps to disassemble the travel motor which include removing seals, pistons, plates and barrel assemblies. Safety notices are included throughout to warn of hazards such as released pressures and falling/lifting heavy components.
Caterpillar cat 323 f excavator (prefix kby) service repair manual (kby00001 ...jfdskekdmme
This document provides instructions for removing and installing the rear power take-off (RPTO) on a Caterpillar 323F excavator engine. The removal procedure involves removing 12 components including gears, adapters, and sleeve bearings. The installation procedure describes installing these components in reverse order and ensuring proper alignment and torque specifications are followed.
This document provides disassembly instructions for the final drive, travel motor, and other components of excavator models 312D2 and 312D2 L. It outlines 16 steps to disassemble the final drive which include draining fluids, removing fittings and valves, and using various tools. It then details 14 steps to disassemble the travel motor which involve removing seals, pistons, plates and other parts. Safety notices are included throughout to warn of potential injuries from springs, fluids and heavy components.
Caterpillar cat 314 c lcr excavator (prefix pca) service repair manual (pca00...jfdskekdmme
This document provides disassembly instructions for excavator models 314C, 314C CR, and 314C LCR. It describes how to disassemble components of the final drive, travel motor, counterbalance valve, and other systems. The instructions are detailed, listing each part and step in the disassembly process. Required tools are provided at the beginning. Safety notices are included throughout to warn of hazards like stored energy in springs.
This document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 312D2 GC excavator. It lists the required tools and parts and provides step-by-step instructions and illustrations for disassembling each component. Personal safety notices are included throughout to warn technicians of potential hazards like parts propelled by springs or releasing hydraulic pressure. The document is intended to guide technicians in properly disassembling these systems for repair or replacement of parts.
Caterpillar cat 312 d excavator (prefix jbc) service repair manual (jbc00001 ...fksjksmmde
This document provides instructions for disassembling the final drive, travel motor, and counterbalance valve of a 312D or 312D L excavator. It lists the required tools and gives step-by-step procedures for removing components such as sprockets, valves, gears, plates, seals, and other parts. Safety notices are included to warn of potential injuries from parts propelled by springs or pressurized fluids. Detailed illustrations supplement the text to show how to take each component apart.
This document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 313D2 excavator. It lists the required tools and outlines 16 steps to disassemble the components, including draining fluids, removing covers, plates, seals, springs, pistons, and housing pieces. Safety notices are included to warn of potential injuries from parts or released pressures.
Caterpillar cat 312 c l excavator (prefix bnn) service repair manual (bnn0000...fjskkksmemm
This document provides instructions for disassembling the final drive, travel motor, and travel counterbalance valve of excavator models 312C and 312C L. It outlines 19 steps to fully disassemble these components, including draining fluids, removing sprockets, valves, plates, seals, springs, and other internal parts. Safety notices are provided throughout to warn of hazards like stored energy, flying parts, and hot or pressurized fluids. Required specialty tools are listed at the beginning.
Caterpillar Cat 312C and 312C L Excavator (Prefix BNN) Service Repair Manual ...fijsekkdmdm2w
This document provides disassembly instructions for the final drive, travel motor, and travel counterbalance valve of excavator models 312C and 312C L. It lists required tools and safety notices, and provides a step-by-step process to disassemble components such as the final drive, travel brake valve, counterbalance valve, travel motor piston assembly, and barrel assembly. Detailed illustrations accompany each step to ensure correct disassembly.
Caterpillar Cat 312C and 312C L Excavator (Prefix BNN) Service Repair Manual ...zan2736ban
The document provides disassembly instructions for the final drive, travel motor, and travel counterbalance valve of excavator models 312C and 312C L. It outlines 19 steps to disassemble the components, including removing covers, plates, gears, seals, springs, and other parts. Required tools include link brackets, a transmission repair stand, bolts, pullers, pliers, and wrenches. Safety notices warn of risks such as fluid pressure, spring force, and heavy component weights during the disassembly process.
This document provides instructions for disassembling the final drive, travel motor, and travel counterbalance valve of excavator models 312C and 312C L. It lists the required tools and gives step-by-step instructions to remove components such as sprockets, valves, seals, plates, and assemblies. Safety notices are included to warn of hazards such as heavy lifting, pressurized fluids, and released spring forces. Detailed illustrations supplement the text to show technicians how to correctly disassemble parts.
Caterpillar Cat 312C L Excavator (Prefix BNN) Service Repair Manual (BNN00001...fusjekkdmdmd2w
This document provides disassembly instructions for the final drive, travel motor, and travel counterbalance valve of excavator models 312C and 312C L. It lists required tools and safety notices, and provides a step-by-step process to disassemble components such as the final drive, travel brake valve, counterbalance valve, travel motor piston assembly, and barrel assembly. Detailed illustrations accompany each step to ensure correct disassembly.
Caterpillar Cat 312C L Excavator (Prefix BNN) Service Repair Manual (BNN00001...f8usejkddmmd
This document provides instructions for disassembling the final drive, travel motor, and travel counterbalance valve of excavator models 312C and 312C L. It lists the required tools and gives step-by-step instructions to remove components such as sprockets, valves, seals, plates, and assemblies. Safety notices are included to warn of hazards such as heavy lifting, pressurized fluids, and released spring forces. Detailed illustrations supplement the text to show technicians how to correctly disassemble parts.
This document provides disassembly instructions for the final drive, travel motor, and travel counterbalance valve of excavator models 312C and 312C L. It lists required tools and safety notices, and provides a step-by-step process to disassemble components such as the final drive, travel brake valve, counterbalance valve, travel motor piston assembly, and barrel assembly. Detailed illustrations accompany each step to ensure correct disassembly.
Caterpillar cat 312 c excavator (prefix bnn) service repair manual (bnn00001 ...idkkdmmd
This document provides instructions for disassembling the final drive, travel motor, and travel counterbalance valve of excavator models 312C and 312C L. It lists the required tools and gives step-by-step instructions to remove components such as sprockets, valves, seals, plates, and assemblies. Safety notices are included to warn of hazards such as heavy lifting, pressurized fluids, and released spring forces. Detailed illustrations supplement the text to show technicians how to correctly disassemble parts.
Caterpillar Cat 312C L Excavator (Prefix BNN) Service Repair Manual (BNN00001...8ufjsekddm8u
This document provides disassembly instructions for the final drive, travel motor, and travel counterbalance valve of excavator models 312C and 312C L. It lists required tools and safety notices, and provides a step-by-step process to disassemble components such as the final drive, travel brake valve, counterbalance valve, travel motor piston assembly, and barrel assembly. Detailed illustrations accompany each step to ensure correct disassembly.
This document provides disassembly instructions for the final drive, travel motor, and travel counterbalance valve of excavator models 312C and 312C L. It lists required tools and safety notices, and provides a step-by-step process to disassemble components such as the final drive, travel brake valve, counterbalance valve, travel motor piston assembly, and barrel assembly. Detailed illustrations accompany each step to ensure correct disassembly.
Caterpillar cat 312 c excavator (prefix bnn) service repair manual (bnn00001 ...dfjjsjkemmm
The document provides disassembly instructions for the final drive, travel motor, and travel counterbalance valve of excavator models 312C and 312C L. It lists required tools and outlines over 30 steps to disassemble components like sprockets, valves, gears, plates, and seals. Safety notices are included throughout to warn of risks like parts under spring pressure, hydraulic fluid, and ensuring fluid is contained.
Caterpillar cat 312 c excavator (prefix bnn) service repair manual (bnn00001 ...fjsjjdkemmde
The document provides disassembly instructions for the final drive, travel motor, and travel counterbalance valve of excavator models 312C and 312C L. It lists required tools and outlines over 30 steps to disassemble components like sprockets, valves, gears, plates, and seals. Safety notices are included throughout to warn of hazards like heavy lifting, pressurized fluids, and released spring forces.
Caterpillar cat 314 c lcr excavator (prefix kja) service repair manual (kja00...jfdskekdmme
This document provides disassembly instructions for the final drive, travel motor, and other components of a 314C excavator. It lists required tools and outlines over 30 steps to disassemble parts like the final drive, travel motor, counterbalance valve, and planetary gear assemblies. Safety notices are included throughout to warn of hazards like released spring forces and hot or pressurized fluids.
The document provides instructions for removing and installing the idler gear on a C4.4 engine. There are separate procedures for a standard idler gear and a heavy-duty idler gear. The removal procedure involves locking the camshaft and crankshaft, removing mounting bolts, and tilting the gear out of position. The installation procedure involves cleaning and inspecting parts, aligning timing marks, lubricating components, and checking specifications such as end play and backlash. Tools and torque specifications are provided.
Caterpillar cat 312 d l excavator (prefix rhl) service repair manual (rhl0000...pfiskdmjekm
The document provides instructions for removing and installing an idler gear on a Caterpillar C4.2 engine. It describes:
1) Removing the front housing, idler gear bolt and washer, thrust plate, and idler gear from the idler gear shaft.
2) Using a puller tool to remove the idler gear bushing and idler shaft from the cylinder block.
3) Checking the idler shaft for wear and replacing if needed.
4) Measuring gear backlash and end play during installation and comparing to specifications.
Caterpillar cat 314 c excavator (prefix sny) service repair manual (sny00001 ...jfdskekdmme
This document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of 314C and 314C CR excavators. It outlines 16 steps to disassemble the final drive which include removing fittings, bolts, and valves. It then details 14 steps to disassemble the counterbalance valve which involve removing springs, seals, pistons, and spools. Finally, it lists 10 steps to disassemble the travel motor which include removing seals, pistons, plates and barrel assemblies. Safety notices are included throughout to warn of hazards such as released pressures and falling/lifting heavy components.
Caterpillar cat 323 f excavator (prefix kby) service repair manual (kby00001 ...jfdskekdmme
This document provides instructions for removing and installing the rear power take-off (RPTO) on a Caterpillar 323F excavator engine. The removal procedure involves removing 12 components including gears, adapters, and sleeve bearings. The installation procedure describes installing these components in reverse order and ensuring proper alignment and torque specifications are followed.
This document provides disassembly instructions for the final drive, travel motor, and other components of excavator models 312D2 and 312D2 L. It outlines 16 steps to disassemble the final drive which include draining fluids, removing fittings and valves, and using various tools. It then details 14 steps to disassemble the travel motor which involve removing seals, pistons, plates and other parts. Safety notices are included throughout to warn of potential injuries from springs, fluids and heavy components.
Caterpillar cat 314 c lcr excavator (prefix pca) service repair manual (pca00...jfdskekdmme
This document provides disassembly instructions for excavator models 314C, 314C CR, and 314C LCR. It describes how to disassemble components of the final drive, travel motor, counterbalance valve, and other systems. The instructions are detailed, listing each part and step in the disassembly process. Required tools are provided at the beginning. Safety notices are included throughout to warn of hazards like stored energy in springs.
This document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 312D2 GC excavator. It lists the required tools and parts and provides step-by-step instructions and illustrations for disassembling each component. Personal safety notices are included throughout to warn technicians of potential hazards like parts propelled by springs or releasing hydraulic pressure. The document is intended to guide technicians in properly disassembling these systems for repair or replacement of parts.
Caterpillar cat 312 d excavator (prefix jbc) service repair manual (jbc00001 ...fksjksmmde
This document provides instructions for disassembling the final drive, travel motor, and counterbalance valve of a 312D or 312D L excavator. It lists the required tools and gives step-by-step procedures for removing components such as sprockets, valves, gears, plates, seals, and other parts. Safety notices are included to warn of potential injuries from parts propelled by springs or pressurized fluids. Detailed illustrations supplement the text to show how to take each component apart.
This document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 313D2 excavator. It lists the required tools and outlines 16 steps to disassemble the components, including draining fluids, removing covers, plates, seals, springs, pistons, and housing pieces. Safety notices are included to warn of potential injuries from parts or released pressures.
Caterpillar cat 312 c l excavator (prefix bnn) service repair manual (bnn0000...fjskkksmemm
This document provides instructions for disassembling the final drive, travel motor, and travel counterbalance valve of excavator models 312C and 312C L. It outlines 19 steps to fully disassemble these components, including draining fluids, removing sprockets, valves, plates, seals, springs, and other internal parts. Safety notices are provided throughout to warn of hazards like stored energy, flying parts, and hot or pressurized fluids. Required specialty tools are listed at the beginning.
Caterpillar Cat 312C and 312C L Excavator (Prefix BNN) Service Repair Manual ...fijsekkdmdm2w
This document provides disassembly instructions for the final drive, travel motor, and travel counterbalance valve of excavator models 312C and 312C L. It lists required tools and safety notices, and provides a step-by-step process to disassemble components such as the final drive, travel brake valve, counterbalance valve, travel motor piston assembly, and barrel assembly. Detailed illustrations accompany each step to ensure correct disassembly.
Caterpillar Cat 312C and 312C L Excavator (Prefix BNN) Service Repair Manual ...zan2736ban
The document provides disassembly instructions for the final drive, travel motor, and travel counterbalance valve of excavator models 312C and 312C L. It outlines 19 steps to disassemble the components, including removing covers, plates, gears, seals, springs, and other parts. Required tools include link brackets, a transmission repair stand, bolts, pullers, pliers, and wrenches. Safety notices warn of risks such as fluid pressure, spring force, and heavy component weights during the disassembly process.
This document provides instructions for disassembling the final drive, travel motor, and travel counterbalance valve of excavator models 312C and 312C L. It lists the required tools and gives step-by-step instructions to remove components such as sprockets, valves, seals, plates, and assemblies. Safety notices are included to warn of hazards such as heavy lifting, pressurized fluids, and released spring forces. Detailed illustrations supplement the text to show technicians how to correctly disassemble parts.
Caterpillar Cat 312C L Excavator (Prefix BNN) Service Repair Manual (BNN00001...fusjekkdmdmd2w
This document provides disassembly instructions for the final drive, travel motor, and travel counterbalance valve of excavator models 312C and 312C L. It lists required tools and safety notices, and provides a step-by-step process to disassemble components such as the final drive, travel brake valve, counterbalance valve, travel motor piston assembly, and barrel assembly. Detailed illustrations accompany each step to ensure correct disassembly.
Caterpillar Cat 312C L Excavator (Prefix BNN) Service Repair Manual (BNN00001...f8usejkddmmd
This document provides instructions for disassembling the final drive, travel motor, and travel counterbalance valve of excavator models 312C and 312C L. It lists the required tools and gives step-by-step instructions to remove components such as sprockets, valves, seals, plates, and assemblies. Safety notices are included to warn of hazards such as heavy lifting, pressurized fluids, and released spring forces. Detailed illustrations supplement the text to show technicians how to correctly disassemble parts.
This document provides disassembly instructions for the final drive, travel motor, and travel counterbalance valve of excavator models 312C and 312C L. It lists required tools and safety notices, and provides a step-by-step process to disassemble components such as the final drive, travel brake valve, counterbalance valve, travel motor piston assembly, and barrel assembly. Detailed illustrations accompany each step to ensure correct disassembly.
Caterpillar cat 312 c excavator (prefix bnn) service repair manual (bnn00001 ...idkkdmmd
This document provides instructions for disassembling the final drive, travel motor, and travel counterbalance valve of excavator models 312C and 312C L. It lists the required tools and gives step-by-step instructions to remove components such as sprockets, valves, seals, plates, and assemblies. Safety notices are included to warn of hazards such as heavy lifting, pressurized fluids, and released spring forces. Detailed illustrations supplement the text to show technicians how to correctly disassemble parts.
Caterpillar Cat 312C L Excavator (Prefix BNN) Service Repair Manual (BNN00001...8ufjsekddm8u
This document provides disassembly instructions for the final drive, travel motor, and travel counterbalance valve of excavator models 312C and 312C L. It lists required tools and safety notices, and provides a step-by-step process to disassemble components such as the final drive, travel brake valve, counterbalance valve, travel motor piston assembly, and barrel assembly. Detailed illustrations accompany each step to ensure correct disassembly.
This document provides disassembly instructions for the final drive, travel motor, and travel counterbalance valve of excavator models 312C and 312C L. It lists required tools and safety notices, and provides a step-by-step process to disassemble components such as the final drive, travel brake valve, counterbalance valve, travel motor piston assembly, and barrel assembly. Detailed illustrations accompany each step to ensure correct disassembly.
Caterpillar cat 312 c excavator (prefix bnn) service repair manual (bnn00001 ...dfjjsjkemmm
The document provides disassembly instructions for the final drive, travel motor, and travel counterbalance valve of excavator models 312C and 312C L. It lists required tools and outlines over 30 steps to disassemble components like sprockets, valves, gears, plates, and seals. Safety notices are included throughout to warn of risks like parts under spring pressure, hydraulic fluid, and ensuring fluid is contained.
Caterpillar cat 312 c excavator (prefix bnn) service repair manual (bnn00001 ...fjsjjdkemmde
The document provides disassembly instructions for the final drive, travel motor, and travel counterbalance valve of excavator models 312C and 312C L. It lists required tools and outlines over 30 steps to disassemble components like sprockets, valves, gears, plates, and seals. Safety notices are included throughout to warn of hazards like heavy lifting, pressurized fluids, and released spring forces.
Caterpillar cat 312 c l excavator (prefix bnn) service repair manual (bnn0000...dfjjsjkemmm
The document provides disassembly instructions for the final drive, travel motor, and travel counterbalance valve of excavator models 312C and 312C L. It lists required tools and outlines over 30 steps to disassemble components like the sprocket, travel brake valve, piston assembly, barrel assembly, and planetary gears. Safety notices are included throughout to warn of risks like parts under spring pressure, hydraulic oil pressure, and being struck by released parts.
Similar to Caterpillar cat 312 c l excavator (prefix fds) service repair manual (fds00001 00300) (13)
Massey ferguson mf 398 tractor, b18008 parts catalogue manualfjjsekdmmme
This document provides a parts list for a Massey Ferguson 398 tractor engine. It includes 33 items related to the cylinder block, including the cylinder block itself, bearings, liners, plugs, bushes, gaskets, and housings. Each part is listed with its part number, quantity, description, and any relevant comments.
Massey ferguson mf 390 tractor, b18008 parts catalogue manualfjjsekdmmme
This document provides parts information for an MF 390 tractor engine. It includes:
1) A list of engine parts with part numbers and descriptions
2) Serial number ranges and other specifications for certain parts
3) Notes on parts that are only used for specific engine models or configurations
The document contains detailed technical information to support ordering replacement parts for the MF 390 tractor engine.
Massey ferguson mf 375 tractor, b18008 parts catalogue manualfjjsekdmmme
The document provides parts information for the engine of a Massey Ferguson 375 tractor, including the cylinder block, crankshaft, pistons, connecting rods, and cylinder head. It lists over 40 individual parts by number, quantity, description, and other identifying information. Key components mentioned include the cylinder block, crankshaft assembly, pistons and connecting rods, and cylinder head. Part numbers, quantities and additional identifying information is provided for each listed part.
Massey ferguson mf 362 n tractor (japan only) parts catalogue manualfjjsekdmmme
This document provides specifications and part numbers for a Massey Ferguson 362 N tractor intended for the Japanese market. It includes detailed parts lists and diagrams for the engine, cylinder block, crankshaft, pistons, cylinder head, and rocker shaft. Reference numbers are provided for ordering replacement parts that are not serviced individually.
Massey ferguson mf 265 tractor, 193552 (gb) parts catalogue manualfjjsekdmmme
The document provides parts information for a Massey Ferguson MF 265 tractor engine. It includes 36 numbered items describing engine parts like the cylinder block, cylinder head, crankshaft, pistons, and timing gears. Each item lists the part number, quantity, description, and any relevant comments. The document contains detailed technical specifications for replacing or repairing parts for this tractor engine.
Massey ferguson mf 31 xp combine engines (perkins) parts catalogue manualfjjsekdmmme
The document provides details on engines for Massey Ferguson MF 24/27/29/29 XP/31/31 XP combine harvesters, including part numbers, quantities and descriptions of engine components. It lists over 100 individual parts that make up engines, such as the cylinder block, crankshaft, pistons, connecting rods, cylinder head and their corresponding part numbers.
Massey ferguson mf 31 combine engines (perkins) parts catalogue manualfjjsekdmmme
The document provides details on Massey Ferguson combine engines, including Perkins A6.354.4 engines used in MF 24, 27, 29, 29 XP, 31, and 31 XP combines. It lists over 100 individual parts that make up the engine, including the cylinder block, crankshaft, pistons, connecting rods, cylinder head, valves, and other components. Each part is given a reference number, part number, quantity used, description, and any relevant comments.
Massey ferguson mf 29 xp combine engines (perkins) parts catalogue manualfjjsekdmmme
The document provides details on Massey Ferguson combine engines, including Perkins A6.354.4 engines used in MF 24, 27, 29, 29 XP, 31, and 31 XP combines. It lists over 100 individual parts that make up the engine, including the cylinder block, crankshaft, pistons, connecting rods, cylinder head, valves, and other components. Each part is given a reference number, part number, quantity used, description, and any relevant comments.
Massey ferguson mf 29 combine engines (perkins) parts catalogue manualfjjsekdmmme
The document provides details on Massey Ferguson combine engines, including Perkins A6.354.4 engines used in MF 24, 27, 29, 29 XP, 31, and 31 XP combines. It lists over 100 individual parts that make up the engine, including the cylinder block, crankshaft, pistons, connecting rods, cylinder head, valves, and other components. Each part is given a reference number, part number, quantity used, description, and any relevant comments.
Massey ferguson mf 27 combine engines (perkins) parts catalogue manualfjjsekdmmme
The document provides details on engines for Massey Ferguson MF 24/27/29/29 XP/31/31 XP combines, including Perkins A6.354.4 engines. It contains lists of engine parts with item numbers, part numbers, quantities and descriptions. Reference information is also provided for various engine components that are not serviced individually.
Massey ferguson mf 24 combine parts catalogue manualfjjsekdmmme
This document provides the parts list and diagrams for a Massey Ferguson MF 24 combine with the model number 819723. It includes detailed lists and diagrams of parts for the straw divider, knives and fingers, wearing plates and stone stop, counter shaft, guarding, and feeder drum systems. Over 50 individual parts are specified by part number, quantity, description and placement in the various systems.
Massey ferguson mf 24 combine engines (perkins) parts catalogue manualfjjsekdmmme
The document provides part numbers and descriptions for components of Massey Ferguson MF 24/27/29/29 XP/31/31 XP combine engines made by Perkins. It includes detailed lists and diagrams of engine parts such as the cylinder block, crankshaft, pistons, connecting rods, cylinder head and other internal engine components. Each part is listed with its number, quantity used, description and any relevant comments.
This document provides specifications and dimensions for "NEF" diesel engines including 3 and 4 cylinder configurations. It describes the lubrication, cooling, and turbocharging systems. Dimensions are given for engine blocks, crankshafts, cylinder heads, valves, camshafts, and other components. Torque specifications are also provided for various engine fasteners.
This document provides specifications and dimensions for "NEF" diesel engines including 3 and 4 cylinder configurations. It describes the lubrication, cooling, and turbocharging systems. Dimensions are given for engine blocks, crankshafts, cylinder heads, valves, camshafts, and other components. Torque specifications are also provided for various engine fasteners.
This document provides specifications and dimensions for "NEF" diesel engines including 3 and 4 cylinder configurations. It describes the lubrication, cooling, and turbocharging systems. Dimensions are given for engine blocks, crankshafts, cylinder heads, valves, camshafts, and other components. Torque specifications are also provided for various engine fasteners.
Claas nectis ve 237 2+4 wd (type t14) tractor service repair manualfjjsekdmmme
1. The document describes the components of the fuel injection system for various tractor models, including the injector pump, fuel pump, filters, injectors, and electrical components.
2. It provides diagrams and explanations of how the system works, with the injector pump supplying pressurized fuel to the injectors based on engine speed and load.
3. Instructions are given for checking and adjusting components like the accelerator control and setting the internal timing of the injector pump.
Claas nectis ve 227 2+4 wd (type t14) tractor service repair manualfjjsekdmmme
1) The document provides identification information and descriptions of components for the fuel injection system of various tractor models, including the injector pump, fuel pump, fuel filter, injectors, and related electrical components.
2) It describes the operating principles of the fuel injection system and components such as the injector pump, which uses a rotary distributor piston to regulate fuel pressure and distribute fuel to the injectors.
3) Check and adjustment procedures are provided for components like the accelerator control, injector pump settings, injector pressure, and fuel supply pressure. Removal and refitting instructions are also given for the fuel filter.
Claas nectis ve 217 2+4 wd (type t14) tractor service repair manualfjjsekdmmme
1. The document describes the components of the fuel injection system for various tractor models, including the injector pump, fuel pump, filters, injectors, and electrical components.
2. It provides diagrams and descriptions of how the system works, with the injector pump supplying pressurized fuel to the injectors based on engine speed and load.
3. Instructions are given for checking and adjusting components like the accelerator control and setting the internal timing of the injector pump.
Claas nectis f 267 2+4 wd (type t16) tractor service repair manualfjjsekdmmme
This document provides specifications for Iveco "NEF" diesel engines, including 3 and 4 cylinder atmospheric and turbocharged models. It describes the engines' lubrication, cooling, and turbocharging systems. Dimensions are provided for pistons, crankshafts, cylinder heads, valves, and other components. Clearances and tolerances are indicated. The engines use mechanical injection pumps and have 2 valves per cylinder.
Claas nectis f 257 2+4 wd (type t16) tractor service repair manualfjjsekdmmme
This document provides specifications for Iveco "NEF" diesel engines, including 3 and 4 cylinder atmospheric and turbocharged models. It describes the engines' lubrication, cooling, and turbocharging systems. Dimensions are provided for pistons, crankshafts, cylinder heads, valves, and other components. Clearances and tolerances are indicated. The engines use mechanical injection pumps and have 2 valves per cylinder.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
2. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 312C EXCAVATOR FDS
Configuration: 312C & 312C L Excavators FDS00001-00300 (MACHINE)
Disassembly and Assembly
312C Excavator Machine Systems
Media Number -RENR5503-04 Publication Date -01/11/2007 Date Updated -19/11/2007
i03040582
Final Drive and Travel Motor - Disassemble
SMCS - 4050-015; 4351-015
S/N - CBA1-UP
S/N - FDS1-UP
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7573 Link Bracket 3
B 1P-2420 Transmission Repair Stand 1
C - Bolt (M6) 2
D
1P-0074 Slide Hammer Puller Gp 1
4C-5666 Threaded Adapter 1
123-6702 Backlash Gauge Gp 1
E 1P-0510 Driver Gp 1
F 8H-0663 Bearing Puller Gp 1
G 1P-1863 Retaining Ring Pliers 1
H 9U-7346 Spanner Wrench As 1
Start By:
1/25(W)
w
2020/5/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
3. A. Remove the final drive and the travel motor. Refer to the Disassembly and Assembly, "Final
Drive and Travel Motor - Remove".
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Caterpillar Dealer Service
Tool Catalog" for tools and supplies suitable to collect and contain
fluids on Caterpillar products.
Dispose of all fluids according to local regulations and mandates.
Personal injury can result from hydraulic oil pressure and hot oil.
Hydraulic oil pressure can remain in the hydraulic system after the
engine has been stopped. Serious injury can be caused if this pressure is
not released before any service is done on the hydraulic system.
Make sure all of the work tools have been lowered to the ground, and
the oil is cool before removing any components or lines. Remove the oil
filler cap only when the engine is stopped, and the filler cap is cool
enough to touch with your bare hand.
1. Thoroughly clean the outside of the travel motor and the final drive prior to disassembly.
2. Remove the sprocket from the final drive and the travel motor. The weight of the sprocket is
approximately 39 kg (86 lb).
3. Mark the alignment of the travel motor and the final drive for reassembly purposes. The
parts must be reinstalled in the original locations.
4. Steps 5 through 11 are for the removal of the travel counterbalance valve.
2/25(W)
w
2020/5/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
4. Illustration 1 g00940682
5. Use Tooling (A) and a suitable lifting device to position the final drive and the travel motor
onto Tooling (B) . The combined weight of the final drive and travel motor is approximately
160 kg (353 lb).
6. Drain the oil from the final drive into a suitable container for storage or for disposal. Refer
to Operation and Maintenance Manual, "Capacities (Refill)" for the capacity of the final
drive.
7. Remove fittings (1) . Remove plug (2) from travel brake valve (3) .
8. Remove bolts (4) that secure travel brake valve (3) to the final drive.
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
9. Use two persons to remove travel brake valve (3) from the final drive. The weight of travel
brake valve (3) is approximately 27 kg (60 lb).
3/25(W)
w
2020/5/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
5. Illustration 2 g00940716
10. Remove valve plate (5) and O-ring seal (2) .
Illustration 3 g01405139
11. Use Tooling (D) to remove bearing (7) .
Disassembly of the Travel Counterbalance Valve
4/25(W)
w
2020/5/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
6. Illustration 4 g01405725
Personal injury can result from parts and/or covers under spring
pressure.
Spring force will be released when covers are removed.
Be prepared to hold spring loaded covers as the bolts are loosened.
1. Position the counterbalance valve, as shown. Remove plug (8) and adapter (9) .
Illustration 5 g01405227
(8) Plug
(9) Adapter
2. Remove spring (10) and spool (11) .
5/25(W)
w
2020/5/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
7. Illustration 6 g01405232
3. Remove relief valve assemblies (12) .
Illustration 7 g01405243
Sudden release of spring force can cause injury.
To prevent the possibility of injury, follow the procedure to relieve the
spring pressure.
6/25(W)
w
2020/5/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
8. 4. Remove seat (13) . Seat (13) is pressed onto valve (17) . Use new parts if seat (13) or valve
(17) is damaged. Do not disassemble these components. Make sure that you reuse the other
component.
5. Remove backup ring (14) and O-ring seal (15) .
6. Remove O-ring seal (22) .
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
7. Remove nut (20) .
8. Remove screw (27) .
9. Remove stopper (26) . Remove backup ring (19) and O-ring seal (18) from stopper (19) .
10. Remove valve (21) , piston (25) , and spring (16) from the housing.
11. Remove backup ring (23) and O-ring seal (24) from piston (25) .
Illustration 8 g01405284
7/25(W)
w
2020/5/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
9. Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
12. Remove covers (28) and the O-ring seals.
Illustration 9 g01405299
(28) Cover
13. Remove springs (29) , guides (30) , and spool assembly (31) .
Illustration 10 g01405345
8/25(W)
w
2020/5/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
10. Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
14. Remove valve (32) , spring (33) , and ball (34) from one end of spool (35) . Repeat for the
other end of spool (35) .
Illustration 11 g01405633
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
9/25(W)
w
2020/5/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
11. 15. Remove plug (36) , spring (38) , and piston (39) from both sides of the housing assembly.
16. Remove O-ring seal (37) from each plug (36) .
Note: Remove the remaining allen head bolts from the housing assembly for cleaning
purposes, if necessary. Each allen head bolt has an O-ring seal. Check the O-ring seal for
wear or for damage. Replace the O-ring seal, if necessary.
Disassembly of the Travel Motor
Illustration 12 g01405794
1. Remove O-ring seal (40) and spring (41) .
Illustration 13 g01405828
10/25(W)
w
2020/5/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
12. 2. Install Tooling (C) onto piston assembly (42) . Use Tooling (C) and a suitable driver to
remove piston assembly (42) from body (43) .
Illustration 14 g01405855
3. Remove O-ring seals (45) and (46) from piston assembly (42) . Remove backup rings (44)
and (47) from piston assembly (42) .
Illustration 15 g01405867
4. Use suitable drivers or a suitable lever to remove guide assembly (48) .
11/25(W)
w
2020/5/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
13. Illustration 16 g01405885
5. Remove O-ring seal (49) and backup ring (50) from guide assembly (48) .
Illustration 17 g01406117
6. Remove four separator plates (51) and four friction plates (52) . Note the alternating order
of separator plates (51) and friction plates (52) for assembly purposes.
Note: Do not allow the components of barrel assembly (53) to come apart while you
remove barrel assembly (53) . The components of barrel assembly (53) must be reinstalled
into the original positions.
Note: Oil will drain from the final drive. Place a suitable container under the final drive for
storage or disposal. Refer to Operation and Maintenance Manual, "Capacities (Refill)" for
the fluid capacity of the final drive.
7. Position the final drive horizontally.
12/25(W)
w
2020/5/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
14. 8. Remove barrel assembly (53) .
Illustration 18 g01406180
Note: Mark the component locations for assembly purposes before you disassemble barrel
assembly (53) .
9. Remove piston assemblies (54) and retainer (55) from barrel assembly (53) .
Illustration 19 g01406210
13/25(W)
w
2020/5/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
15. Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
10. Remove retainer (56) , spacer (57) , and springs (58) from barrel assembly (53) .
Illustration 20 g01406263
11. Put location marks on cam plate (59) for assembly purposes. Make sure that the thick end of
cam plate (59) is adjacent to the opening that is across body (43) . Remove cam plate (59) .
14/25(W)
w
2020/5/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
16. Illustration 21 g01406329
Illustration 22 g01406338
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
12. Remove piston (60) and spring (62) .
13. Remove key (61) .
Disassembly of the Final Drive
15/25(W)
w
2020/5/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
17. Illustration 23 g01406376
1. Use a suitable lifting device to position the final drive on Tooling (B) , as shown. The
weight of the final drive is approximately 200 kg (441 lb).
2. Remove plugs (63) . Remove the O-ring seals from plugs (63) . Check the O-ring seals for
wear or for damage. Replace the O-ring seals, if necessary.
3. Remove bolts (65) . Use a suitable chisel to remove cover (64) .
Illustration 24 g01406386
4. Raise the temperature of bolts (66) in order to loosen the thread sealant.
5. Remove bolts (66) and plate (67) .
16/25(W)
w
2020/5/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
18. Illustration 25 g01406397
6. Remove sun gear (68) .
Illustration 26 g01406400
7. Attach Tooling (A) and a suitable lifting device to carrier assembly (69) . Remove carrier
assembly (69) , planetary gear assembly (70) , and bearing assembly (71) as a unit.
17/25(W)
w
2020/5/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
19. Illustration 27 g01406789
8. Remove planetary gear (70) and bearing assembly (71) from carrier assembly (69) . Repeat
for the remaining planetary gears (70) and bearing assemblies (71) .
Illustration 28 g01406822
9. Remove sun gear (72) .
10. Raise the temperature of bolts (73) in order to loosen the thread sealant. Remove bolts (73) .
Remove plate (74) .
18/25(W)
w
2020/5/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
20. Illustration 29 g01406850
11. Remove retaining ring (75) from sun gear (72) . Check retaining ring (75) for wear or for
damage. Replace retaining ring (75) , if necessary.
Illustration 30 g01406853
12. Remove planetary gear (76) .
19/25(W)
w
2020/5/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
21. Illustration 31 g01406875
13. Remove bearing (77) , race (78) , and thrust washer (79) .
14. Repeat Steps 12 and 13 in order to remove the remaining planetary gear assemblies.
Illustration 32 g01406882
15. Remove bolt (80) and plate (81) .
20/25(W)
w
2020/5/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
22. Illustration 33 g01406885
Illustration 34 g01406886
16. Use Tooling (H) to remove nut (82) .
21/25(W)
w
2020/5/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
23. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
24. Illustration 35 g01406906
17. Install Tooling (A) and a suitable lifting device to housing (83) . The weight of housing (83)
is approximately 35 kg (77 lb).
18. Remove housing (83) from body assembly (84) .
Illustration 36 g01406912
19. Remove Duo-cone seal gp (85) from the body assembly and the housing.
22/25(W)
w
2020/5/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
25. Illustration 37 g01407100
20. Remove both bearings (86) from housing (83) .
Illustration 38 g01407089
21. Remove both bearing races (87) from housing (83) .
23/25(W)
w
2020/5/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
26. Illustration 39 g01407115
22. Position body assembly (84) horizontally. Remove shaft assembly (88) , the bearing, and the
retaining ring.
Illustration 40 g01407144
23. Use Tooling (G) to remove retaining ring (89) from shaft assembly (88) .
Illustration 41 g01407161
24/25(W)
w
2020/5/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...