"Trans Failsafe Prog" on your BMW X5 indicates potential transmission issues requiring immediate action. This safety feature activates in response to abnormalities like low fluid levels, leaks, faulty sensors, electrical or mechanical failures, and overheating.
Comprehensive program for Agricultural Finance, the Automotive Sector, and Empowerment . We will define the full scope and provide a detailed two-week plan for identifying strategic partners in each area within Limpopo, including target areas.:
1. Agricultural : Supporting Primary and Secondary Agriculture
• Scope: Provide support solutions to enhance agricultural productivity and sustainability.
• Target Areas: Polokwane, Tzaneen, Thohoyandou, Makhado, and Giyani.
2. Automotive Sector: Partnerships with Mechanics and Panel Beater Shops
• Scope: Develop collaborations with automotive service providers to improve service quality and business operations.
• Target Areas: Polokwane, Lephalale, Mokopane, Phalaborwa, and Bela-Bela.
3. Empowerment : Focusing on Women Empowerment
• Scope: Provide business support support and training to women-owned businesses, promoting economic inclusion.
• Target Areas: Polokwane, Thohoyandou, Musina, Burgersfort, and Louis Trichardt.
We will also prioritize Industrial Economic Zone areas and their priorities.
Sign up on https://profilesmes.online/welcome/
To be eligible:
1. You must have a registered business and operate in Limpopo
2. Generate revenue
3. Sectors : Agriculture ( primary and secondary) and Automative
Women and Youth are encouraged to apply even if you don't fall in those sectors.
What Does the PARKTRONIC Inoperative, See Owner's Manual Message Mean for You...Autohaus Service and Sales
Learn what "PARKTRONIC Inoperative, See Owner's Manual" means for your Mercedes-Benz. This message indicates a malfunction in the parking assistance system, potentially due to sensor issues or electrical faults. Prompt attention is crucial to ensure safety and functionality. Follow steps outlined for diagnosis and repair in the owner's manual.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Why Is Your BMW X3 Hood Not Responding To Release CommandsDart Auto
Experiencing difficulty opening your BMW X3's hood? This guide explores potential issues like mechanical obstruction, hood release mechanism failure, electrical problems, and emergency release malfunctions. Troubleshooting tips include basic checks, clearing obstructions, applying pressure, and using the emergency release.
𝘼𝙣𝙩𝙞𝙦𝙪𝙚 𝙋𝙡𝙖𝙨𝙩𝙞𝙘 𝙏𝙧𝙖𝙙𝙚𝙧𝙨 𝙞𝙨 𝙫𝙚𝙧𝙮 𝙛𝙖𝙢𝙤𝙪𝙨 𝙛𝙤𝙧 𝙢𝙖𝙣𝙪𝙛𝙖𝙘𝙩𝙪𝙧𝙞𝙣𝙜 𝙩𝙝𝙚𝙞𝙧 𝙥𝙧𝙤𝙙𝙪𝙘𝙩𝙨. 𝙒𝙚 𝙝𝙖𝙫𝙚 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙥𝙡𝙖𝙨𝙩𝙞𝙘 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙪𝙨𝙚𝙙 𝙞𝙣 𝙖𝙪𝙩𝙤𝙢𝙤𝙩𝙞𝙫𝙚 𝙖𝙣𝙙 𝙖𝙪𝙩𝙤 𝙥𝙖𝙧𝙩𝙨 𝙖𝙣𝙙 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙛𝙖𝙢𝙤𝙪𝙨 𝙘𝙤𝙢𝙥𝙖𝙣𝙞𝙚𝙨 𝙗𝙪𝙮 𝙩𝙝𝙚 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙛𝙧𝙤𝙢 𝙪𝙨.
Over the 10 years, we have gained a strong foothold in the market due to our range's high quality, competitive prices, and time-lined delivery schedules.
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
In this presentation, we have discussed a very important feature of BMW X5 cars… the Comfort Access. Things that can significantly limit its functionality. And things that you can try to restore the functionality of such a convenient feature of your vehicle.
What Exactly Is The Common Rail Direct Injection System & How Does It WorkMotor Cars International
Learn about Common Rail Direct Injection (CRDi) - the revolutionary technology that has made diesel engines more efficient. Explore its workings, advantages like enhanced fuel efficiency and increased power output, along with drawbacks such as complexity and higher initial cost. Compare CRDi with traditional diesel engines and discover why it's the preferred choice for modern engines.
Things to remember while upgrading the brakes of your carjennifermiller8137
Upgrading the brakes of your car? Keep these things in mind before doing so. Additionally, start using an OBD 2 GPS tracker so that you never miss a vehicle maintenance appointment. On top of this, a car GPS tracker will also let you master good driving habits that will let you increase the operational life of your car’s brakes.
5 Warning Signs Your BMW's Intelligent Battery Sensor Needs AttentionBertini's German Motors
IBS monitors and manages your BMW’s battery performance. If it malfunctions, you will have to deal with an array of electrical issues in your vehicle. Recognize warning signs like dimming headlights, frequent battery replacements, and electrical malfunctions to address potential IBS issues promptly.
2. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 312C EXCAVATOR BNN
Configuration: 312C & 312C L Excavators BNN00001-UP (MACHINE) POWERED BY 3054T Engine
Disassembly and Assembly
312C Excavator Machine Systems
Media Number -RENR7476-00 Publication Date -01/07/2003 Date Updated -22/07/2003
i03040582
Final Drive and Travel Motor - Disassemble
SMCS - 4050-015; 4351-015
S/N - BNN1-UP
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7573 Link Bracket 3
B 1P-2420 Transmission Repair Stand 1
C - Bolt (M6) 2
D
1P-0074 Slide Hammer Puller Gp 1
4C-5666 Threaded Adapter 1
123-6702 Backlash Gauge Gp 1
E 1P-0510 Driver Gp 1
F 8H-0663 Bearing Puller Gp 1
G 1P-1863 Retaining Ring Pliers 1
H 9U-7346 Spanner Wrench As 1
Start By:
A. Remove the final drive and the travel motor. Refer to the Disassembly and Assembly, "Final
Drive and Travel Motor - Remove".
1/25312C & 312C L Excavators BNN00001-UP (MACHINE) POWERED BY 3054T Eng...
2020/5/20https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Caterpillar Dealer Service
Tool Catalog" for tools and supplies suitable to collect and contain
fluids on Caterpillar products.
Dispose of all fluids according to local regulations and mandates.
Personal injury can result from hydraulic oil pressure and hot oil.
Hydraulic oil pressure can remain in the hydraulic system after the
engine has been stopped. Serious injury can be caused if this pressure is
not released before any service is done on the hydraulic system.
Make sure all of the work tools have been lowered to the ground, and
the oil is cool before removing any components or lines. Remove the oil
filler cap only when the engine is stopped, and the filler cap is cool
enough to touch with your bare hand.
1. Thoroughly clean the outside of the travel motor and the final drive prior to disassembly.
2. Remove the sprocket from the final drive and the travel motor. The weight of the sprocket is
approximately 39 kg (86 lb).
3. Mark the alignment of the travel motor and the final drive for reassembly purposes. The
parts must be reinstalled in the original locations.
4. Steps 5 through 11 are for the removal of the travel counterbalance valve.
2/25312C & 312C L Excavators BNN00001-UP (MACHINE) POWERED BY 3054T Eng...
2020/5/20https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. Illustration 1 g00940682
5. Use Tooling (A) and a suitable lifting device to position the final drive and the travel motor
onto Tooling (B) . The combined weight of the final drive and travel motor is approximately
160 kg (353 lb).
6. Drain the oil from the final drive into a suitable container for storage or for disposal. Refer
to Operation and Maintenance Manual, "Capacities (Refill)" for the capacity of the final
drive.
7. Remove fittings (1) . Remove plug (2) from travel brake valve (3) .
8. Remove bolts (4) that secure travel brake valve (3) to the final drive.
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
9. Use two persons to remove travel brake valve (3) from the final drive. The weight of travel
brake valve (3) is approximately 27 kg (60 lb).
3/25312C & 312C L Excavators BNN00001-UP (MACHINE) POWERED BY 3054T Eng...
2020/5/20https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. Illustration 2 g00940716
10. Remove valve plate (5) and O-ring seal (2) .
Illustration 3 g01405139
11. Use Tooling (D) to remove bearing (7) .
Disassembly of the Travel Counterbalance Valve
4/25312C & 312C L Excavators BNN00001-UP (MACHINE) POWERED BY 3054T Eng...
2020/5/20https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. Illustration 4 g01405725
Personal injury can result from parts and/or covers under spring
pressure.
Spring force will be released when covers are removed.
Be prepared to hold spring loaded covers as the bolts are loosened.
1. Position the counterbalance valve, as shown. Remove plug (8) and adapter (9) .
Illustration 5 g01405227
(8) Plug
(9) Adapter
2. Remove spring (10) and spool (11) .
5/25312C & 312C L Excavators BNN00001-UP (MACHINE) POWERED BY 3054T Eng...
2020/5/20https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. Illustration 6 g01405232
3. Remove relief valve assemblies (12) .
Illustration 7 g01405243
Sudden release of spring force can cause injury.
To prevent the possibility of injury, follow the procedure to relieve the
spring pressure.
6/25312C & 312C L Excavators BNN00001-UP (MACHINE) POWERED BY 3054T Eng...
2020/5/20https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. 4. Remove seat (13) . Seat (13) is pressed onto valve (17) . Use new parts if seat (13) or valve
(17) is damaged. Do not disassemble these components. Make sure that you reuse the other
component.
5. Remove backup ring (14) and O-ring seal (15) .
6. Remove O-ring seal (22) .
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
7. Remove nut (20) .
8. Remove screw (27) .
9. Remove stopper (26) . Remove backup ring (19) and O-ring seal (18) from stopper (19) .
10. Remove valve (21) , piston (25) , and spring (16) from the housing.
11. Remove backup ring (23) and O-ring seal (24) from piston (25) .
Illustration 8 g01405284
7/25312C & 312C L Excavators BNN00001-UP (MACHINE) POWERED BY 3054T Eng...
2020/5/20https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
12. Remove covers (28) and the O-ring seals.
Illustration 9 g01405299
(28) Cover
13. Remove springs (29) , guides (30) , and spool assembly (31) .
Illustration 10 g01405345
8/25312C & 312C L Excavators BNN00001-UP (MACHINE) POWERED BY 3054T Eng...
2020/5/20https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
14. Remove valve (32) , spring (33) , and ball (34) from one end of spool (35) . Repeat for the
other end of spool (35) .
Illustration 11 g01405633
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
9/25312C & 312C L Excavators BNN00001-UP (MACHINE) POWERED BY 3054T Eng...
2020/5/20https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. 15. Remove plug (36) , spring (38) , and piston (39) from both sides of the housing assembly.
16. Remove O-ring seal (37) from each plug (36) .
Note: Remove the remaining allen head bolts from the housing assembly for cleaning
purposes, if necessary. Each allen head bolt has an O-ring seal. Check the O-ring seal for
wear or for damage. Replace the O-ring seal, if necessary.
Disassembly of the Travel Motor
Illustration 12 g01405794
1. Remove O-ring seal (40) and spring (41) .
Illustration 13 g01405828
10/25312C & 312C L Excavators BNN00001-UP (MACHINE) POWERED BY 3054T E...
2020/5/20https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. 2. Install Tooling (C) onto piston assembly (42) . Use Tooling (C) and a suitable driver to
remove piston assembly (42) from body (43) .
Illustration 14 g01405855
3. Remove O-ring seals (45) and (46) from piston assembly (42) . Remove backup rings (44)
and (47) from piston assembly (42) .
Illustration 15 g01405867
4. Use suitable drivers or a suitable lever to remove guide assembly (48) .
11/25312C & 312C L Excavators BNN00001-UP (MACHINE) POWERED BY 3054T E...
2020/5/20https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. Illustration 16 g01405885
5. Remove O-ring seal (49) and backup ring (50) from guide assembly (48) .
Illustration 17 g01406117
6. Remove four separator plates (51) and four friction plates (52) . Note the alternating order
of separator plates (51) and friction plates (52) for assembly purposes.
Note: Do not allow the components of barrel assembly (53) to come apart while you
remove barrel assembly (53) . The components of barrel assembly (53) must be reinstalled
into the original positions.
Note: Oil will drain from the final drive. Place a suitable container under the final drive for
storage or disposal. Refer to Operation and Maintenance Manual, "Capacities (Refill)" for
the fluid capacity of the final drive.
7. Position the final drive horizontally.
12/25312C & 312C L Excavators BNN00001-UP (MACHINE) POWERED BY 3054T E...
2020/5/20https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. 8. Remove barrel assembly (53) .
Illustration 18 g01406180
Note: Mark the component locations for assembly purposes before you disassemble barrel
assembly (53) .
9. Remove piston assemblies (54) and retainer (55) from barrel assembly (53) .
Illustration 19 g01406210
13/25312C & 312C L Excavators BNN00001-UP (MACHINE) POWERED BY 3054T E...
2020/5/20https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
10. Remove retainer (56) , spacer (57) , and springs (58) from barrel assembly (53) .
Illustration 20 g01406263
11. Put location marks on cam plate (59) for assembly purposes. Make sure that the thick end of
cam plate (59) is adjacent to the opening that is across body (43) . Remove cam plate (59) .
14/25312C & 312C L Excavators BNN00001-UP (MACHINE) POWERED BY 3054T E...
2020/5/20https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. Illustration 21 g01406329
Illustration 22 g01406338
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
12. Remove piston (60) and spring (62) .
13. Remove key (61) .
Disassembly of the Final Drive
15/25312C & 312C L Excavators BNN00001-UP (MACHINE) POWERED BY 3054T E...
2020/5/20https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. Illustration 23 g01406376
1. Use a suitable lifting device to position the final drive on Tooling (B) , as shown. The
weight of the final drive is approximately 200 kg (441 lb).
2. Remove plugs (63) . Remove the O-ring seals from plugs (63) . Check the O-ring seals for
wear or for damage. Replace the O-ring seals, if necessary.
3. Remove bolts (65) . Use a suitable chisel to remove cover (64) .
Illustration 24 g01406386
4. Raise the temperature of bolts (66) in order to loosen the thread sealant.
5. Remove bolts (66) and plate (67) .
16/25312C & 312C L Excavators BNN00001-UP (MACHINE) POWERED BY 3054T E...
2020/5/20https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. Illustration 25 g01406397
6. Remove sun gear (68) .
Illustration 26 g01406400
7. Attach Tooling (A) and a suitable lifting device to carrier assembly (69) . Remove carrier
assembly (69) , planetary gear assembly (70) , and bearing assembly (71) as a unit.
17/25312C & 312C L Excavators BNN00001-UP (MACHINE) POWERED BY 3054T E...
2020/5/20https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
19. Illustration 27 g01406789
8. Remove planetary gear (70) and bearing assembly (71) from carrier assembly (69) . Repeat
for the remaining planetary gears (70) and bearing assemblies (71) .
Illustration 28 g01406822
9. Remove sun gear (72) .
10. Raise the temperature of bolts (73) in order to loosen the thread sealant. Remove bolts (73) .
Remove plate (74) .
18/25312C & 312C L Excavators BNN00001-UP (MACHINE) POWERED BY 3054T E...
2020/5/20https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
20. Illustration 29 g01406850
11. Remove retaining ring (75) from sun gear (72) . Check retaining ring (75) for wear or for
damage. Replace retaining ring (75) , if necessary.
Illustration 30 g01406853
12. Remove planetary gear (76) .
19/25312C & 312C L Excavators BNN00001-UP (MACHINE) POWERED BY 3054T E...
2020/5/20https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
21. Illustration 31 g01406875
13. Remove bearing (77) , race (78) , and thrust washer (79) .
14. Repeat Steps 12 and 13 in order to remove the remaining planetary gear assemblies.
Illustration 32 g01406882
15. Remove bolt (80) and plate (81) .
20/25312C & 312C L Excavators BNN00001-UP (MACHINE) POWERED BY 3054T E...
2020/5/20https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
22. Illustration 33 g01406885
Illustration 34 g01406886
16. Use Tooling (H) to remove nut (82) .
21/25312C & 312C L Excavators BNN00001-UP (MACHINE) POWERED BY 3054T E...
2020/5/20https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
23. Illustration 35 g01406906
17. Install Tooling (A) and a suitable lifting device to housing (83) . The weight of housing (83)
is approximately 35 kg (77 lb).
18. Remove housing (83) from body assembly (84) .
Illustration 36 g01406912
19. Remove Duo-cone seal gp (85) from the body assembly and the housing.
22/25312C & 312C L Excavators BNN00001-UP (MACHINE) POWERED BY 3054T E...
2020/5/20https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
24. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
25. Illustration 37 g01407100
20. Remove both bearings (86) from housing (83) .
Illustration 38 g01407089
21. Remove both bearing races (87) from housing (83) .
23/25312C & 312C L Excavators BNN00001-UP (MACHINE) POWERED BY 3054T E...
2020/5/20https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
26. Illustration 39 g01407115
22. Position body assembly (84) horizontally. Remove shaft assembly (88) , the bearing, and the
retaining ring.
Illustration 40 g01407144
23. Use Tooling (G) to remove retaining ring (89) from shaft assembly (88) .
Illustration 41 g01407161
24/25312C & 312C L Excavators BNN00001-UP (MACHINE) POWERED BY 3054T E...
2020/5/20https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
27. 24. Use Tooling (E) , Tooling (F) , and a suitable press to remove bearing (90) .
Illustration 42 g01407166
25. Remove lip seal (91) from the body assembly.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Wed May 20 01:21:52 UTC+0800 2020
25/25312C & 312C L Excavators BNN00001-UP (MACHINE) POWERED BY 3054T E...
2020/5/20https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...