The document provides instructions for removing and installing various engine components on a Caterpillar 299D XHP compact track loader, including:
- Water pump removal and installation procedures involving removing guards, belts, bolts, and gaskets.
- Water temperature regulator removal involving disconnecting hoses and removing bolts, cover, and gasket.
- Flywheel removal involving removing bolts, pump coupling, and lifting the flywheel assembly off.
- Crankshaft rear seal removal by drilling holes in the seal and using a slide hammer, and installation using a driver tool.
- Crankshaft rear seal carrier removal by removing bolts and the bearing case cover, and installation by
Why Is Your BMW X3 Hood Not Responding To Release CommandsDart Auto
Experiencing difficulty opening your BMW X3's hood? This guide explores potential issues like mechanical obstruction, hood release mechanism failure, electrical problems, and emergency release malfunctions. Troubleshooting tips include basic checks, clearing obstructions, applying pressure, and using the emergency release.
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
In this presentation, we have discussed a very important feature of BMW X5 cars… the Comfort Access. Things that can significantly limit its functionality. And things that you can try to restore the functionality of such a convenient feature of your vehicle.
Core technology of Hyundai Motor Group's EV platform 'E-GMP'Hyundai Motor Group
What’s the force behind Hyundai Motor Group's EV performance and quality?
Maximized driving performance and quick charging time through high-density battery pack and fast charging technology and applicable to various vehicle types!
Discover more about Hyundai Motor Group’s EV platform ‘E-GMP’!
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Symptoms like intermittent starting and key recognition errors signal potential problems with your Mercedes’ EIS. Use diagnostic steps like error code checks and spare key tests. Professional diagnosis and solutions like EIS replacement ensure safe driving. Consult a qualified technician for accurate diagnosis and repair.
What Exactly Is The Common Rail Direct Injection System & How Does It WorkMotor Cars International
Learn about Common Rail Direct Injection (CRDi) - the revolutionary technology that has made diesel engines more efficient. Explore its workings, advantages like enhanced fuel efficiency and increased power output, along with drawbacks such as complexity and higher initial cost. Compare CRDi with traditional diesel engines and discover why it's the preferred choice for modern engines.
5 Warning Signs Your BMW's Intelligent Battery Sensor Needs AttentionBertini's German Motors
IBS monitors and manages your BMW’s battery performance. If it malfunctions, you will have to deal with an array of electrical issues in your vehicle. Recognize warning signs like dimming headlights, frequent battery replacements, and electrical malfunctions to address potential IBS issues promptly.
"Trans Failsafe Prog" on your BMW X5 indicates potential transmission issues requiring immediate action. This safety feature activates in response to abnormalities like low fluid levels, leaks, faulty sensors, electrical or mechanical failures, and overheating.
Things to remember while upgrading the brakes of your carjennifermiller8137
Upgrading the brakes of your car? Keep these things in mind before doing so. Additionally, start using an OBD 2 GPS tracker so that you never miss a vehicle maintenance appointment. On top of this, a car GPS tracker will also let you master good driving habits that will let you increase the operational life of your car’s brakes.
Comprehensive program for Agricultural Finance, the Automotive Sector, and Empowerment . We will define the full scope and provide a detailed two-week plan for identifying strategic partners in each area within Limpopo, including target areas.:
1. Agricultural : Supporting Primary and Secondary Agriculture
• Scope: Provide support solutions to enhance agricultural productivity and sustainability.
• Target Areas: Polokwane, Tzaneen, Thohoyandou, Makhado, and Giyani.
2. Automotive Sector: Partnerships with Mechanics and Panel Beater Shops
• Scope: Develop collaborations with automotive service providers to improve service quality and business operations.
• Target Areas: Polokwane, Lephalale, Mokopane, Phalaborwa, and Bela-Bela.
3. Empowerment : Focusing on Women Empowerment
• Scope: Provide business support support and training to women-owned businesses, promoting economic inclusion.
• Target Areas: Polokwane, Thohoyandou, Musina, Burgersfort, and Louis Trichardt.
We will also prioritize Industrial Economic Zone areas and their priorities.
Sign up on https://profilesmes.online/welcome/
To be eligible:
1. You must have a registered business and operate in Limpopo
2. Generate revenue
3. Sectors : Agriculture ( primary and secondary) and Automative
Women and Youth are encouraged to apply even if you don't fall in those sectors.
What Does the PARKTRONIC Inoperative, See Owner's Manual Message Mean for You...Autohaus Service and Sales
Learn what "PARKTRONIC Inoperative, See Owner's Manual" means for your Mercedes-Benz. This message indicates a malfunction in the parking assistance system, potentially due to sensor issues or electrical faults. Prompt attention is crucial to ensure safety and functionality. Follow steps outlined for diagnosis and repair in the owner's manual.
𝘼𝙣𝙩𝙞𝙦𝙪𝙚 𝙋𝙡𝙖𝙨𝙩𝙞𝙘 𝙏𝙧𝙖𝙙𝙚𝙧𝙨 𝙞𝙨 𝙫𝙚𝙧𝙮 𝙛𝙖𝙢𝙤𝙪𝙨 𝙛𝙤𝙧 𝙢𝙖𝙣𝙪𝙛𝙖𝙘𝙩𝙪𝙧𝙞𝙣𝙜 𝙩𝙝𝙚𝙞𝙧 𝙥𝙧𝙤𝙙𝙪𝙘𝙩𝙨. 𝙒𝙚 𝙝𝙖𝙫𝙚 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙥𝙡𝙖𝙨𝙩𝙞𝙘 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙪𝙨𝙚𝙙 𝙞𝙣 𝙖𝙪𝙩𝙤𝙢𝙤𝙩𝙞𝙫𝙚 𝙖𝙣𝙙 𝙖𝙪𝙩𝙤 𝙥𝙖𝙧𝙩𝙨 𝙖𝙣𝙙 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙛𝙖𝙢𝙤𝙪𝙨 𝙘𝙤𝙢𝙥𝙖𝙣𝙞𝙚𝙨 𝙗𝙪𝙮 𝙩𝙝𝙚 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙛𝙧𝙤𝙢 𝙪𝙨.
Over the 10 years, we have gained a strong foothold in the market due to our range's high quality, competitive prices, and time-lined delivery schedules.
2. Shutdown SIS
Previous Screen
Product: COMPACT TRACK LOADER
Model: 299D XHP COMPACT TRACK LOADER JST
Configuration: 299D XHP Compact Track Loader JST00001-UP (MACHINE) POWERED BY C3.8 Engine
Disassembly and Assembly
C3.8 Engines for Caterpillar Built Machines
Media Number -UENR0129-08 Publication Date -01/09/2015 Date Updated -19/05/2016
i06617810
Water Pump - Remove and Install
SMCS - 1361-011; 1361-012
Removal Procedure
1. Refer to Operation and Maintenance Manual, "Radiator Tilting".
At operating temperature, the engine coolant is hot and under pressure.
Steam can cause personal injury.
Check the coolant level only after the engine has been stopped and the
fill cap is cool enough to touch with your bare hand.
Remove the fill cap slowly to relieve pressure.
Cooling system conditioner contains alkali. Avoid contact with the skin
and eyes to prevent personal injury.
2. Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change"
for the correct draining and filling procedure.
1/3299D XHP Compact Track Loader JST00001-UP (MACHINE) POWERED BY C3.8 ...
2019/11/1https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. Illustration 1 g06048252
SSL, MTL, and CTL
Illustration 2 g06048291
CWL
3. For the SSL, MTL, and CTL models, loosen quarter turn fasteners (2). For the CWL models
loosen the four bolts (2). Remove guard (1).
2/3299D XHP Compact Track Loader JST00001-UP (MACHINE) POWERED BY C3.8 ...
2019/11/1https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. Illustration 3 g06048336
4. Loosen nut (3) and bolt (4).
Illustration 4 g06048364
5. Remove belt (5). Remove bolts (6) and pulley (7).
Illustration 5 g06048371
6. Remove bolts (8), water pump (9) and the gasket.
Installation Procedure
1. Install water pump (9) in the reverse order of removal.
a. Refer to Operation and Maintenance Manual, "Belt - Inspect, Adjust, Replace" for
proper belt tensioning procedure.
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Fri Nov 1 22:20:49 UTC+0800 2019
3/3299D XHP Compact Track Loader JST00001-UP (MACHINE) POWERED BY C3.8 ...
2019/11/1https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. Shutdown SIS
Previous Screen
Product: COMPACT TRACK LOADER
Model: 299D XHP COMPACT TRACK LOADER JST
Configuration: 299D XHP Compact Track Loader JST00001-UP (MACHINE) POWERED BY C3.8 Engine
Disassembly and Assembly
C3.8 Engines for Caterpillar Built Machines
Media Number -UENR0129-08 Publication Date -01/09/2015 Date Updated -19/05/2016
i04696569
Water Temperature Regulator - Remove and Install
SMCS - 1355-010
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Three Bond 1217H -
At operating temperature, the engine coolant is hot and under pressure.
Steam can cause personal injury.
Check the coolant level only after the engine has been stopped and the
fill cap is cool enough to touch with your bare hand.
Remove the fill cap slowly to relieve pressure.
Cooling system conditioner contains alkali. Avoid contact with the skin
and eyes to prevent personal injury.
1. Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change".
1/3299D XHP Compact Track Loader JST00001-UP (MACHINE) POWERED BY C3.8 ...
2019/11/1https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. Illustration 1 g02822856
2. Disconnect hose (1).
Illustration 2 g02837597
Illustration 3 g02886720
3. Remove bolts (2) to remove cover (3). Remove water temperature regulator (4) and gasket
(5).
Note: Note the alignment of the water temperature regulator with the hole that is in the
regulator housing, as indicated.
2/3299D XHP Compact Track Loader JST00001-UP (MACHINE) POWERED BY C3.8 ...
2019/11/1https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. Installation Procedure
1. Install water temperature regulator (4) in the reverse order of removal.
a. Install a new gasket (5).
b. Apply Tooling (A) onto the mating surface of cover (3).
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Fri Nov 1 22:21:44 UTC+0800 2019
3/3299D XHP Compact Track Loader JST00001-UP (MACHINE) POWERED BY C3.8 ...
2019/11/1https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. Shutdown SIS
Previous Screen
Product: COMPACT TRACK LOADER
Model: 299D XHP COMPACT TRACK LOADER JST
Configuration: 299D XHP Compact Track Loader JST00001-UP (MACHINE) POWERED BY C3.8 Engine
Disassembly and Assembly
C3.8 Engines for Caterpillar Built Machines
Media Number -UENR0129-08 Publication Date -01/09/2015 Date Updated -19/05/2016
i04664022
Flywheel - Remove
SMCS - 1156-011
Removal Procedure
Start By:
a. Remove the starting motor.
Illustration 1 g02797115
1. Remove bolts (1). Remove cover (2).
1/3299D XHP Compact Track Loader JST00001-UP (MACHINE) POWERED BY C3.8 ...
2019/11/1https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. Illustration 2 g02797118
2. Remove bolts (3). Remove pump coupling (4).
Illustration 3 g02797120
3. Mark the position of the flywheel assembly on the crankshaft.
4. Attach a suitable lifting device to flywheel assembly (5). The weight of flywheel assembly
(5) is approximately 23 kg (50 lb).
5. Remove bolts (6). Remove flywheel assembly (5).
Note: Do not use and impact wrench to remove bolts (6).
2/3299D XHP Compact Track Loader JST00001-UP (MACHINE) POWERED BY C3.8 ...
2019/11/1https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. Illustration 4 g02797125
Typical example
6. Inspect ring gear (7) and flywheel (8) for wear or damage. If the ring gear or the flywheel is
worn or damaged, use new parts for replacement.
7. To remove ring gear (7) from flywheel (8), place the flywheel on a suitable support. Use a
hammer and a punch to remove the ring gear from the flywheel.
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Fri Nov 1 22:22:40 UTC+0800 2019
3/3299D XHP Compact Track Loader JST00001-UP (MACHINE) POWERED BY C3.8 ...
2019/11/1https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. Shutdown SIS
Previous Screen
Product: COMPACT TRACK LOADER
Model: 299D XHP COMPACT TRACK LOADER JST
Configuration: 299D XHP Compact Track Loader JST00001-UP (MACHINE) POWERED BY C3.8 Engine
Disassembly and Assembly
C3.8 Engines for Caterpillar Built Machines
Media Number -UENR0129-08 Publication Date -01/09/2015 Date Updated -19/05/2016
i04664023
Flywheel - Install
SMCS - 1156-012
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 9U-7994 Guide Bolt 2
Always wear protective gloves when handling parts that have been
heated.
1/4299D XHP Compact Track Loader JST00001-UP (MACHINE) POWERED BY C3.8 ...
2019/11/1https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. Illustration 1 g02797127
Typical example
1. If the ring gear was removed, follow Steps 1.a through 1.c to install ring gear (7) to flywheel
(8).
a. Identify the orientation of the new ring gear in order to install the ring gear correctly
onto the flywheel.
Note: The chamfered side of gear teeth (Y) must face toward the starting motor when
the flywheel is installed. This will ensure the correct engagement of the starting
motor.
b. Heat ring gear (3) in an oven to a maximum temperature of 150°C (302°F) prior to
installation.
Note: Do not use a torch to heat the ring gear.
c. Ensure that the orientation of ring gear (7) is correct and quickly install the ring gear
onto flywheel (8).
Illustration 2 g02797120
2/4299D XHP Compact Track Loader JST00001-UP (MACHINE) POWERED BY C3.8 ...
2019/11/1https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. 2. Thoroughly clean the flywheel housing. Inspect the crankshaft rear seal for leaks. If there
are any oil leaks replace the crankshaft rear seal. Refer to Disassembly and Assembly,
"Crankshaft Rear Seal - Remove and Install".
3. Install Tooling (A) on the crankshaft.
4. Use a suitable lifting device to position flywheel assembly (5). The weight of flywheel
assembly (5) is approximately 23 kg (50 lb).
5. Align flywheel assembly (5) with Tooling (A). Install flywheel assembly (5) to the
crankshaft.
Note: Ensure the correct orientation of the flywheel on the crankshaft.
6. Apply clean engine oil onto bolts (6). Install bolts (6) finger tight.
7. Remove Tooling (A) and install the two remaining bolts (6).
8. Remove the lifting device from the flywheel.
9. Use a suitable tool to prevent flywheel assembly (5) from rotating. Tighten bolts (6) to a
torque of 98.1 to 107 N·m (72 to 79 lb ft).
10. Check the concentricity of the flywheel. Refer to Systems Operation, Testing and Adjusting,
"Flywheel - Inspect".
Illustration 3 g02797118
11. Install pump coupling (4). Install bolts (3).
3/4299D XHP Compact Track Loader JST00001-UP (MACHINE) POWERED BY C3.8 ...
2019/11/1https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. Illustration 4 g02797115
12. Install cover (2). Install bolts (1).
End By:
a. Install the starting motor.
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Fri Nov 1 22:23:36 UTC+0800 2019
4/4299D XHP Compact Track Loader JST00001-UP (MACHINE) POWERED BY C3.8 ...
2019/11/1https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. Shutdown SIS
Previous Screen
Product: COMPACT TRACK LOADER
Model: 299D XHP COMPACT TRACK LOADER JST
Configuration: 299D XHP Compact Track Loader JST00001-UP (MACHINE) POWERED BY C3.8 Engine
Disassembly and Assembly
C3.8 Engines for Caterpillar Built Machines
Media Number -UENR0129-08 Publication Date -01/09/2015 Date Updated -19/05/2016
i04664019
Crankshaft Rear Seal - Remove and Install
SMCS - 1161-010
Removal Procedure
Start By:
a. Remove the flywheel.
Illustration 1 g02797554
1. Drill three holes in lip seal (1). Use a suitable slide hammer to remove lip seal (1).
2. Remove ring seal (2).
Installation Procedure
Table 1
Required Tools
1/2299D XHP Compact Track Loader JST00001-UP (MACHINE) POWERED BY C3.8 ...
2019/11/1https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. Tool Part Number Part Description Qty
A 393-2571 Driver 1
Illustration 2 g02797554
Illustration 3 g02870418
1. Use Tooling (A) to install ring seal (2).
2. Use Tooling (A) to install lip seal (1).
End By:
a. Install the flywheel.
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Fri Nov 1 22:24:32 UTC+0800 2019
2/2299D XHP Compact Track Loader JST00001-UP (MACHINE) POWERED BY C3.8 ...
2019/11/1https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. Shutdown SIS
Previous Screen
Product: COMPACT TRACK LOADER
Model: 299D XHP COMPACT TRACK LOADER JST
Configuration: 299D XHP Compact Track Loader JST00001-UP (MACHINE) POWERED BY C3.8 Engine
Disassembly and Assembly
C3.8 Engines for Caterpillar Built Machines
Media Number -UENR0129-08 Publication Date -01/09/2015 Date Updated -19/05/2016
i04839813
Crankshaft Rear Seal Carrier - Remove and Install
SMCS - 1161-010-C3
Removal Procedure
1. Refer to Specifications, "Crankshaft".
Illustration 1 g02869998
2. Remove bolts (1). Use two of bolts (1) to remove bearing case cover (2) .
1/3299D XHP Compact Track Loader JST00001-UP (MACHINE) POWERED BY C3.8 ...
2019/11/1https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. Illustration 2 g02870025
3. Remove lip seal (3) from bearing case cover (2) .
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 393-2571 Seal Installer 1
B - Three Bond 1217H -
Illustration 3 g02870025
2/3299D XHP Compact Track Loader JST00001-UP (MACHINE) POWERED BY C3.8 ...
2019/11/1https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
19. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
20. Illustration 4 g02870418
1. Use Tooling (A) to install lip seal (3) into bearing case cover (2) .
Illustration 5 g02869998
2. Apply Tooling (B) onto the mating surface of bearing case cover (2). Apply clean engine oil
onto the lip seal. Install bearing case cover (2) .
3. Install bolts (1). Tighten bolts (1) to a torque of 25.5 ± 1.5 N·m (18.8 ± 1.1 lb ft).
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Fri Nov 1 22:25:27 UTC+0800 2019
3/3299D XHP Compact Track Loader JST00001-UP (MACHINE) POWERED BY C3.8 ...
2019/11/1https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
21. Shutdown SIS
Previous Screen
Product: COMPACT TRACK LOADER
Model: 299D XHP COMPACT TRACK LOADER JST
Configuration: 299D XHP Compact Track Loader JST00001-UP (MACHINE) POWERED BY C3.8 Engine
Disassembly and Assembly
C3.8 Engines for Caterpillar Built Machines
Media Number -UENR0129-08 Publication Date -01/09/2015 Date Updated -19/05/2016
i06272842
Flywheel Housing - Remove and Install
SMCS - 1157-010
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 439-3938 Link Bracket 2
B - Three Bond1217H 1
Start By:
a. Remove the bearing case cover.
Illustration 1 g02797548
1/2299D XHP Compact Track Loader JST00001-UP (MACHINE) POWERED BY C3.8 ...
2019/11/1https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
22. 1. Attach Tooling (A) and a suitable lifting device onto flywheel housing (1). The weight of
flywheel housing (1) is approximately 45 kg (100 lb).
2. Remove bolts (2) and bolts (3). Remove flywheel housing (1).
Installation Procedure
1. Install flywheel housing (1) in the reverse order of removal.
a. Apply Tooling (B) onto the mating surface of flywheel housing (1).
b. For the SSL, MTL, and CTL models that end in D2 models (BL2, MD2, BL7, HP2,
FD2, DX2, DX9, and BY4), tighten bolts (3) and bolts (2) to a torque of
103 ± 14 N·m (76 ± 10 lb ft).
c. For all other models, tighten bolts (3) and bolts (2) to a torque of 78 ± 12 N·m
(56 ± 9 lb ft).
d. Refer to Systems Operation, Testing and Adjusting, "Flywheel Housing - Inspect".
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Fri Nov 1 22:26:23 UTC+0800 2019
2/2299D XHP Compact Track Loader JST00001-UP (MACHINE) POWERED BY C3.8 ...
2019/11/1https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
23. Shutdown SIS
Previous Screen
Product: COMPACT TRACK LOADER
Model: 299D XHP COMPACT TRACK LOADER JST
Configuration: 299D XHP Compact Track Loader JST00001-UP (MACHINE) POWERED BY C3.8 Engine
Disassembly and Assembly
C3.8 Engines for Caterpillar Built Machines
Media Number -UENR0129-08 Publication Date -01/09/2015 Date Updated -19/05/2016
i04664013
Crankshaft Pulley - Remove and Install
SMCS - 1205-010
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 393-2572 Flywheel Stopper 1
Start By:
a. Remove the belt.
1. Install Tooling (A) onto the flywheel.
Illustration 1 g02860756
2. Remove bolt (1) to remove pulley (2).
1/2299D XHP Compact Track Loader JST00001-UP (MACHINE) POWERED BY C3.8 ...
2019/11/1https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...