The document provides instructions for removing and disassembling fuel system components on a Caterpillar 3306 engine, including:
- Removing the fuel priming pump by turning off the fuel supply, removing securing bolts and disconnecting tubes.
- Removing the fuel filter base by turning off the fuel supply, disconnecting lines, and removing bolts and washers.
- Removing the fuel transfer pump by turning off the fuel supply, disconnecting tubes, and removing securing bolts.
- Disassembling the fuel transfer pump by removing springs, seals, valves, piston, sleeve, guide, and housing cover components.
The document provides instructions for removing and installing the fuel priming pump, removing and installing the fuel filter base, and removing the fuel transfer pump from a Caterpillar 3306 engine. The procedures include:
- Turning off the fuel supply and disconnecting tubes and hoses
- Removing bolts and washers securing components and lifting parts off
- Checking condition of gaskets and installing new ones if needed
- Reinstalling components by securing with bolts and reconnecting tubes and hoses
The instructions emphasize cleaning parts and containing fluids during disassembly and reinstallation.
The document provides instructions for removing and installing the fuel priming pump, removing and installing the fuel filter base, and removing the fuel transfer pump from a Caterpillar 3306 engine. It includes safety notices and outlines the necessary tools. The procedures describe disconnecting fuel lines, removing mounting bolts and other hardware, and checking gasket conditions. Pictures and diagrams supplement the text instructions.
The document provides instructions for removing and installing the fuel priming pump, removing and installing the fuel filter base, and removing the fuel transfer pump from a Caterpillar 3306 engine. The procedures describe draining fuel, removing bolts and connections, and installing replacement parts in the reverse order. Safety notices recommend keeping parts clean and containing fluids during maintenance.
The document provides instructions for removing and installing several fuel system components on a Caterpillar 3306 engine, including:
- The fuel priming pump, which is removed by disconnecting lines and tubes and removing mounting bolts. Installation is the reverse.
- The fuel filter base, which is removed by disconnecting lines and removing mounting bolts. A new gasket should be used upon installation.
- The fuel transfer pump, which is removed by disconnecting lines and tubes and removing mounting bolts.
The document provides detailed illustrations and cautions to keep parts clean and contain fluids during the process. Proper removal and installation of gaskets and seals is emphasized.
Caterpillar Cat 235 EXCAVATOR (Prefix 83X) Service Repair Manual (83X00001-00...xiapokang564341
The document provides instructions for removing and installing the fuel priming pump, fuel filter base, and fuel transfer pump on a Caterpillar 3306 engine. It includes safety notices and outlines the necessary tools, removal procedures with illustrations, and installation procedures with illustrations for each component. The fuel transfer pump section also provides instructions for disassembling and assembling the pump.
Caterpillar Cat 235 EXCAVATOR (Prefix 83X) Service Repair Manual (83X00001-00...hvy7sbkw8e
The document provides instructions for removing and installing the fuel priming pump, fuel filter base, and fuel transfer pump on a Caterpillar 3306 engine. It includes safety notices and outlines the necessary tools, removal procedures with illustrations, and installation procedures with illustrations for each component. The fuel transfer pump section also provides multi-step instructions for disassembling and assembling the pump.
Caterpillar Cat 235 EXCAVATOR (Prefix 83X) Service Repair Manual (83X00001-00...wenxian17880
The document provides instructions for removing and disassembling fuel system components on a Caterpillar 3306 engine, including:
- Removing the fuel priming pump by turning off the fuel supply, removing securing bolts and disconnecting tubes
- Removing the fuel filter base by disconnecting fuel lines and removing securing bolts
- Removing the fuel transfer pump by turning off the fuel supply and removing securing bolts and tubes
- Disassembling the fuel transfer pump by removing covers, springs, seals, valves and other internal components
The document provides instructions for removing and disassembling fuel system components on a Caterpillar 3306 engine, including:
- Removing the fuel priming pump by turning off the fuel supply, removing securing bolts and disconnecting tubes.
- Removing the fuel filter base by turning off the fuel supply, disconnecting lines, and removing bolts and washers.
- Removing the fuel transfer pump by turning off the fuel supply, disconnecting tubes, and removing securing bolts.
- Disassembling the fuel transfer pump by removing covers, springs, seals, valves, pistons, sleeves, and other internal components.
The document provides instructions for removing and installing the fuel priming pump, removing and installing the fuel filter base, and removing the fuel transfer pump from a Caterpillar 3306 engine. The procedures include:
- Turning off the fuel supply and disconnecting tubes and hoses
- Removing bolts and washers securing components and lifting parts off
- Checking condition of gaskets and installing new ones if needed
- Reinstalling components by securing with bolts and reconnecting tubes and hoses
The instructions emphasize cleaning parts and containing fluids during disassembly and reinstallation.
The document provides instructions for removing and installing the fuel priming pump, removing and installing the fuel filter base, and removing the fuel transfer pump from a Caterpillar 3306 engine. It includes safety notices and outlines the necessary tools. The procedures describe disconnecting fuel lines, removing mounting bolts and other hardware, and checking gasket conditions. Pictures and diagrams supplement the text instructions.
The document provides instructions for removing and installing the fuel priming pump, removing and installing the fuel filter base, and removing the fuel transfer pump from a Caterpillar 3306 engine. The procedures describe draining fuel, removing bolts and connections, and installing replacement parts in the reverse order. Safety notices recommend keeping parts clean and containing fluids during maintenance.
The document provides instructions for removing and installing several fuel system components on a Caterpillar 3306 engine, including:
- The fuel priming pump, which is removed by disconnecting lines and tubes and removing mounting bolts. Installation is the reverse.
- The fuel filter base, which is removed by disconnecting lines and removing mounting bolts. A new gasket should be used upon installation.
- The fuel transfer pump, which is removed by disconnecting lines and tubes and removing mounting bolts.
The document provides detailed illustrations and cautions to keep parts clean and contain fluids during the process. Proper removal and installation of gaskets and seals is emphasized.
Caterpillar Cat 235 EXCAVATOR (Prefix 83X) Service Repair Manual (83X00001-00...xiapokang564341
The document provides instructions for removing and installing the fuel priming pump, fuel filter base, and fuel transfer pump on a Caterpillar 3306 engine. It includes safety notices and outlines the necessary tools, removal procedures with illustrations, and installation procedures with illustrations for each component. The fuel transfer pump section also provides instructions for disassembling and assembling the pump.
Caterpillar Cat 235 EXCAVATOR (Prefix 83X) Service Repair Manual (83X00001-00...hvy7sbkw8e
The document provides instructions for removing and installing the fuel priming pump, fuel filter base, and fuel transfer pump on a Caterpillar 3306 engine. It includes safety notices and outlines the necessary tools, removal procedures with illustrations, and installation procedures with illustrations for each component. The fuel transfer pump section also provides multi-step instructions for disassembling and assembling the pump.
Caterpillar Cat 235 EXCAVATOR (Prefix 83X) Service Repair Manual (83X00001-00...wenxian17880
The document provides instructions for removing and disassembling fuel system components on a Caterpillar 3306 engine, including:
- Removing the fuel priming pump by turning off the fuel supply, removing securing bolts and disconnecting tubes
- Removing the fuel filter base by disconnecting fuel lines and removing securing bolts
- Removing the fuel transfer pump by turning off the fuel supply and removing securing bolts and tubes
- Disassembling the fuel transfer pump by removing covers, springs, seals, valves and other internal components
The document provides instructions for removing and disassembling fuel system components on a Caterpillar 3306 engine, including:
- Removing the fuel priming pump by turning off the fuel supply, removing securing bolts and disconnecting tubes.
- Removing the fuel filter base by turning off the fuel supply, disconnecting lines, and removing bolts and washers.
- Removing the fuel transfer pump by turning off the fuel supply, disconnecting tubes, and removing securing bolts.
- Disassembling the fuel transfer pump by removing covers, springs, seals, valves, pistons, sleeves, and other internal components.
The document provides instructions for removing and disassembling fuel system components on a Caterpillar 3306 engine, including:
- Removing the fuel priming pump by turning off the fuel supply, removing securing bolts and disconnecting tubes.
- Removing the fuel filter base by turning off the fuel supply, disconnecting lines, and removing bolts and washers.
- Removing the fuel transfer pump by turning off the fuel supply, disconnecting tubes, and removing securing bolts.
- Disassembling the fuel transfer pump by removing covers, springs, seals, valves, pistons, sleeves, and other internal components.
This document provides instructions for removing and installing the fuel priming pump, fuel filter base, and fuel transfer pump on a Caterpillar 235D Excavator with a 3306 engine. The procedures describe draining fuel, removing mounting bolts and hoses, checking gaskets, and reinstalling components in the reverse order while taking precautions to contain fluids.
This document provides instructions for removing and installing the fuel priming pump, fuel filter base, and fuel transfer pump on a Caterpillar 235D Excavator with a 3306 engine. The procedures describe draining fuel, removing mounting bolts and connections, installing new seals and gaskets if needed, and reattaching components in the reverse order of removal. Disassembly and assembly of the fuel transfer pump is also outlined.
This document provides instructions for removing and installing the fuel priming pump, fuel filter base, and fuel transfer pump on a Caterpillar 235D Excavator with a 3306 engine. The procedures describe draining fuel, removing mounting bolts and hoses, checking gaskets, and reinstalling components in the reverse order while taking precautions to contain fluids.
This document provides instructions for removing and installing the fuel priming pump, fuel filter base, and fuel transfer pump on a Caterpillar 235D Excavator with a 3306 engine. The procedures describe draining fuel, removing mounting bolts and connections, installing new seals and gaskets if needed, and reattaching components in the reverse order of removal. Disassembly and assembly of the fuel transfer pump is also outlined.
This document provides instructions for removing and installing the fuel priming pump, fuel filter base, and fuel transfer pump on a Caterpillar 235D Excavator with a 3306 engine. The procedures describe draining fuel, removing mounting bolts and connections, installing new seals and gaskets if needed, and reattaching components in the reverse order of removal. Dismantling and assembling the fuel transfer pump involves removing its internal components like pistons, springs, and valves, and replacing seals before reassembly.
This document provides instructions for removing and installing the fuel priming pump, fuel filter base, and fuel transfer pump on a Caterpillar 235D Excavator with a 3306 engine. The procedures describe draining fuel, removing mounting bolts and connections, installing new seals and gaskets if needed, and reattaching components in the reverse order of removal. Dismantling and assembling the fuel transfer pump involves removing its internal components like pistons, springs, and valves, and replacing seals before reassembly.
Caterpillar cat 235 d excavator (prefix 8kj) service repair manual (8kj00001 ...fujsekfksmemer
This service repair manual provides instructions for removing and installing several fuel system components on a Caterpillar 3306 engine, including:
1) The fuel priming pump, which includes disconnecting fuel lines and removing mounting bolts.
2) The fuel filter base, which must be removed to access the fuel filter. This involves disconnecting fuel lines and removing mounting bolts.
3) The fuel transfer pump, which is removed by disconnecting fuel lines and removing mounting bolts.
Caterpillar cat 235 b excavator (prefix 4ed) service repair manual (4ed00001 ...fujsekksmem
The document provides instructions for removing and installing the fuel priming pump, fuel filter base, and fuel transfer pump on a 235B EXCAVATOR with a 3306 engine. The procedures describe draining fuel, removing mounting bolts and hoses, and installing replacement parts in the reverse order while taking care to contain fluids and avoid contamination. Tools required include strap wrenches and the procedures note checking and replacing gaskets as needed. The fuel transfer pump section also details disassembly and assembly steps including spring, seals, and internal components.
Caterpillar cat 235 b excavator (prefix 4ed) service repair manual (4ed00001 ...fujsjefskekmm
The document provides instructions for removing and installing several fuel system components on a Caterpillar 3306 engine, including:
- The fuel priming pump, which is removed by disconnecting fuel lines and removing mounting bolts. It is installed by reversing the removal steps.
- The fuel filter base, which is removed by disconnecting fuel lines and removing mounting bolts. It is installed by reversing the removal steps after checking and replacing gaskets if needed.
- The fuel transfer pump, which is removed by disconnecting fuel lines and removing mounting bolts. Detailed steps are provided to disassemble and reassemble the fuel transfer pump components.
Caterpillar cat 235 b excavator (prefix 4ed) service repair manual (4ed00001 ...uujjfjjkskmme
The document provides instructions for removing and disassembling the fuel transfer pump on a Caterpillar 235B Excavator. It describes:
1) Removing the fuel transfer pump by disconnecting tubes and removing bolts.
2) Disassembling the pump by removing covers, springs, seals, pistons, sleeves, and valves.
3) The document emphasizes cleanliness and containing fluids during maintenance.
Caterpillar cat 235 b excavator (prefix 4ed) service repair manual (4ed00001 ...fujsefjfkksekem
The document provides instructions for removing and disassembling the fuel transfer pump on a Caterpillar 235B Excavator. It describes:
1) Removing the fuel transfer pump by disconnecting tubes and removing bolts.
2) Disassembling the pump by removing covers, springs, seals, pistons, sleeves, and valves.
3) The document emphasizes cleanliness and containing fluids during maintenance.
Caterpillar cat 235 b excavator (prefix 4ed) service repair manual (4ed00001 ...yhfhjjkdksmme
The document provides instructions for removing and installing several fuel system components on a Caterpillar 3306 engine, including:
- The fuel priming pump, which is removed by disconnecting hoses and removing mounting bolts. It is installed by reversing the removal steps.
- The fuel filter base, which is removed by disconnecting lines and removing mounting bolts. It is installed by reversing the removal steps and replacing any worn gaskets.
- The fuel transfer pump, which is removed by disconnecting inlet and outlet lines and removing mounting bolts. Disassembly and assembly instructions are also provided.
The document provides instructions for removing and disassembling the fuel transfer pump on a Caterpillar 235B EXCAVATOR. It describes:
1) Removing the fuel transfer pump by disconnecting tubes and removing bolts.
2) Disassembling the pump housing by removing covers, springs, seals, pistons, sleeves, and valves.
3) Throughout, it emphasizes cleanliness and proper fluid containment, and provides illustrations of each step.
The document provides instructions for removing and disassembling the fuel transfer pump on a Caterpillar 235B EXCAVATOR. It describes:
1) Removing the fuel transfer pump by disconnecting tubes and removing bolts.
2) Disassembling the pump housing by removing covers, springs, seals, pistons, sleeves, and valves.
3) Throughout, it emphasizes cleanliness and proper fluid containment, and provides illustrations of each step.
The document provides instructions for removing and disassembling the fuel transfer pump on a Caterpillar 235B EXCAVATOR. It describes:
1) Removing the fuel transfer pump by disconnecting tubes and removing bolts.
2) Disassembling the pump housing by removing covers, springs, seals, pistons, sleeves, and valves.
3) Throughout, it emphasizes cleanliness and proper fluid containment, and provides illustrations of each step.
The document provides instructions for removing and installing the fuel priming pump, fuel filter base, and fuel transfer pump on a 235B EXCAVATOR with a 3306 engine. The procedures describe draining fuel, removing mounting bolts and hoses, and installing replacement parts in the reverse order while taking care to contain fluids and avoid contamination. Tools required include strap wrenches and containers for fluids. Detailed illustrations accompany each step-by-step instruction set.
The document provides instructions for removing and installing the fuel priming pump, fuel filter base, and fuel transfer pump on a 235B EXCAVATOR with a 3306 engine. The procedures describe draining fuel, removing mounting bolts and hoses, and installing replacement parts in the reverse order while taking care to contain fluids and avoid contamination. Tools required include strap wrenches and containers for fluids. Detailed illustrations accompany each step-by-step instruction set.
The document provides instructions for removing and installing the fuel priming pump, fuel filter base, and fuel transfer pump on a 235B EXCAVATOR with a 3306 engine. The procedures describe draining fuel, removing mounting bolts and hoses, and installing replacement parts in the reverse order while taking care to contain fluids and avoid contamination. Tools required include strap wrenches and containers for fluids. Detailed illustrations accompany each step-by-step instruction set.
The document provides instructions for removing and installing the fuel priming pump, fuel filter base, and fuel transfer pump on a 235B EXCAVATOR with a 3306 engine. The procedures describe draining fuel, removing mounting bolts and hoses, and installing replacement parts in the reverse order while taking care to contain fluids and avoid contamination. Tools required include strap wrenches and containers for fluids. Detailed illustrations accompany each step-by-step instruction set.
Caterpillar Cat 277D MULTI TERRAIN LOADER (Prefix NTL) Service Repair Manual ...jfkksemmdmd
This document provides instructions for removing and installing various engine components on a Caterpillar 277D Multi Terrain Loader, including the camshaft gear, engine oil pan, pistons, connecting rods, and related parts. Detailed procedures are given for each component, including required tools and torque specifications. Illustrations are included to supplement the written instructions. Safety notices are also provided to ensure safe handling of fluids.
The document provides instructions for disassembling the piston motor (hydrostatic) on a 279C Compact Track Loader. It lists required tools and outlines 27 steps to fully disassemble the component. Key steps include removing retaining rings, springs, pistons, plates, seals, bearings and other internal parts from the head, barrel assembly and shaft. Safety precautions are provided to prevent injury from parts propelled by released spring forces during disassembly.
More Related Content
Similar to Caterpillar Cat 235 EXCAVATOR (Prefix 83X) Service Repair Manual (83X00001-00443).pdf
The document provides instructions for removing and disassembling fuel system components on a Caterpillar 3306 engine, including:
- Removing the fuel priming pump by turning off the fuel supply, removing securing bolts and disconnecting tubes.
- Removing the fuel filter base by turning off the fuel supply, disconnecting lines, and removing bolts and washers.
- Removing the fuel transfer pump by turning off the fuel supply, disconnecting tubes, and removing securing bolts.
- Disassembling the fuel transfer pump by removing covers, springs, seals, valves, pistons, sleeves, and other internal components.
This document provides instructions for removing and installing the fuel priming pump, fuel filter base, and fuel transfer pump on a Caterpillar 235D Excavator with a 3306 engine. The procedures describe draining fuel, removing mounting bolts and hoses, checking gaskets, and reinstalling components in the reverse order while taking precautions to contain fluids.
This document provides instructions for removing and installing the fuel priming pump, fuel filter base, and fuel transfer pump on a Caterpillar 235D Excavator with a 3306 engine. The procedures describe draining fuel, removing mounting bolts and connections, installing new seals and gaskets if needed, and reattaching components in the reverse order of removal. Disassembly and assembly of the fuel transfer pump is also outlined.
This document provides instructions for removing and installing the fuel priming pump, fuel filter base, and fuel transfer pump on a Caterpillar 235D Excavator with a 3306 engine. The procedures describe draining fuel, removing mounting bolts and hoses, checking gaskets, and reinstalling components in the reverse order while taking precautions to contain fluids.
This document provides instructions for removing and installing the fuel priming pump, fuel filter base, and fuel transfer pump on a Caterpillar 235D Excavator with a 3306 engine. The procedures describe draining fuel, removing mounting bolts and connections, installing new seals and gaskets if needed, and reattaching components in the reverse order of removal. Disassembly and assembly of the fuel transfer pump is also outlined.
This document provides instructions for removing and installing the fuel priming pump, fuel filter base, and fuel transfer pump on a Caterpillar 235D Excavator with a 3306 engine. The procedures describe draining fuel, removing mounting bolts and connections, installing new seals and gaskets if needed, and reattaching components in the reverse order of removal. Dismantling and assembling the fuel transfer pump involves removing its internal components like pistons, springs, and valves, and replacing seals before reassembly.
This document provides instructions for removing and installing the fuel priming pump, fuel filter base, and fuel transfer pump on a Caterpillar 235D Excavator with a 3306 engine. The procedures describe draining fuel, removing mounting bolts and connections, installing new seals and gaskets if needed, and reattaching components in the reverse order of removal. Dismantling and assembling the fuel transfer pump involves removing its internal components like pistons, springs, and valves, and replacing seals before reassembly.
Caterpillar cat 235 d excavator (prefix 8kj) service repair manual (8kj00001 ...fujsekfksmemer
This service repair manual provides instructions for removing and installing several fuel system components on a Caterpillar 3306 engine, including:
1) The fuel priming pump, which includes disconnecting fuel lines and removing mounting bolts.
2) The fuel filter base, which must be removed to access the fuel filter. This involves disconnecting fuel lines and removing mounting bolts.
3) The fuel transfer pump, which is removed by disconnecting fuel lines and removing mounting bolts.
Caterpillar cat 235 b excavator (prefix 4ed) service repair manual (4ed00001 ...fujsekksmem
The document provides instructions for removing and installing the fuel priming pump, fuel filter base, and fuel transfer pump on a 235B EXCAVATOR with a 3306 engine. The procedures describe draining fuel, removing mounting bolts and hoses, and installing replacement parts in the reverse order while taking care to contain fluids and avoid contamination. Tools required include strap wrenches and the procedures note checking and replacing gaskets as needed. The fuel transfer pump section also details disassembly and assembly steps including spring, seals, and internal components.
Caterpillar cat 235 b excavator (prefix 4ed) service repair manual (4ed00001 ...fujsjefskekmm
The document provides instructions for removing and installing several fuel system components on a Caterpillar 3306 engine, including:
- The fuel priming pump, which is removed by disconnecting fuel lines and removing mounting bolts. It is installed by reversing the removal steps.
- The fuel filter base, which is removed by disconnecting fuel lines and removing mounting bolts. It is installed by reversing the removal steps after checking and replacing gaskets if needed.
- The fuel transfer pump, which is removed by disconnecting fuel lines and removing mounting bolts. Detailed steps are provided to disassemble and reassemble the fuel transfer pump components.
Caterpillar cat 235 b excavator (prefix 4ed) service repair manual (4ed00001 ...uujjfjjkskmme
The document provides instructions for removing and disassembling the fuel transfer pump on a Caterpillar 235B Excavator. It describes:
1) Removing the fuel transfer pump by disconnecting tubes and removing bolts.
2) Disassembling the pump by removing covers, springs, seals, pistons, sleeves, and valves.
3) The document emphasizes cleanliness and containing fluids during maintenance.
Caterpillar cat 235 b excavator (prefix 4ed) service repair manual (4ed00001 ...fujsefjfkksekem
The document provides instructions for removing and disassembling the fuel transfer pump on a Caterpillar 235B Excavator. It describes:
1) Removing the fuel transfer pump by disconnecting tubes and removing bolts.
2) Disassembling the pump by removing covers, springs, seals, pistons, sleeves, and valves.
3) The document emphasizes cleanliness and containing fluids during maintenance.
Caterpillar cat 235 b excavator (prefix 4ed) service repair manual (4ed00001 ...yhfhjjkdksmme
The document provides instructions for removing and installing several fuel system components on a Caterpillar 3306 engine, including:
- The fuel priming pump, which is removed by disconnecting hoses and removing mounting bolts. It is installed by reversing the removal steps.
- The fuel filter base, which is removed by disconnecting lines and removing mounting bolts. It is installed by reversing the removal steps and replacing any worn gaskets.
- The fuel transfer pump, which is removed by disconnecting inlet and outlet lines and removing mounting bolts. Disassembly and assembly instructions are also provided.
The document provides instructions for removing and disassembling the fuel transfer pump on a Caterpillar 235B EXCAVATOR. It describes:
1) Removing the fuel transfer pump by disconnecting tubes and removing bolts.
2) Disassembling the pump housing by removing covers, springs, seals, pistons, sleeves, and valves.
3) Throughout, it emphasizes cleanliness and proper fluid containment, and provides illustrations of each step.
The document provides instructions for removing and disassembling the fuel transfer pump on a Caterpillar 235B EXCAVATOR. It describes:
1) Removing the fuel transfer pump by disconnecting tubes and removing bolts.
2) Disassembling the pump housing by removing covers, springs, seals, pistons, sleeves, and valves.
3) Throughout, it emphasizes cleanliness and proper fluid containment, and provides illustrations of each step.
The document provides instructions for removing and disassembling the fuel transfer pump on a Caterpillar 235B EXCAVATOR. It describes:
1) Removing the fuel transfer pump by disconnecting tubes and removing bolts.
2) Disassembling the pump housing by removing covers, springs, seals, pistons, sleeves, and valves.
3) Throughout, it emphasizes cleanliness and proper fluid containment, and provides illustrations of each step.
The document provides instructions for removing and installing the fuel priming pump, fuel filter base, and fuel transfer pump on a 235B EXCAVATOR with a 3306 engine. The procedures describe draining fuel, removing mounting bolts and hoses, and installing replacement parts in the reverse order while taking care to contain fluids and avoid contamination. Tools required include strap wrenches and containers for fluids. Detailed illustrations accompany each step-by-step instruction set.
The document provides instructions for removing and installing the fuel priming pump, fuel filter base, and fuel transfer pump on a 235B EXCAVATOR with a 3306 engine. The procedures describe draining fuel, removing mounting bolts and hoses, and installing replacement parts in the reverse order while taking care to contain fluids and avoid contamination. Tools required include strap wrenches and containers for fluids. Detailed illustrations accompany each step-by-step instruction set.
The document provides instructions for removing and installing the fuel priming pump, fuel filter base, and fuel transfer pump on a 235B EXCAVATOR with a 3306 engine. The procedures describe draining fuel, removing mounting bolts and hoses, and installing replacement parts in the reverse order while taking care to contain fluids and avoid contamination. Tools required include strap wrenches and containers for fluids. Detailed illustrations accompany each step-by-step instruction set.
The document provides instructions for removing and installing the fuel priming pump, fuel filter base, and fuel transfer pump on a 235B EXCAVATOR with a 3306 engine. The procedures describe draining fuel, removing mounting bolts and hoses, and installing replacement parts in the reverse order while taking care to contain fluids and avoid contamination. Tools required include strap wrenches and containers for fluids. Detailed illustrations accompany each step-by-step instruction set.
Similar to Caterpillar Cat 235 EXCAVATOR (Prefix 83X) Service Repair Manual (83X00001-00443).pdf (20)
Caterpillar Cat 277D MULTI TERRAIN LOADER (Prefix NTL) Service Repair Manual ...jfkksemmdmd
This document provides instructions for removing and installing various engine components on a Caterpillar 277D Multi Terrain Loader, including the camshaft gear, engine oil pan, pistons, connecting rods, and related parts. Detailed procedures are given for each component, including required tools and torque specifications. Illustrations are included to supplement the written instructions. Safety notices are also provided to ensure safe handling of fluids.
The document provides instructions for disassembling the piston motor (hydrostatic) on a 279C Compact Track Loader. It lists required tools and outlines 27 steps to fully disassemble the component. Key steps include removing retaining rings, springs, pistons, plates, seals, bearings and other internal parts from the head, barrel assembly and shaft. Safety precautions are provided to prevent injury from parts propelled by released spring forces during disassembly.
This document provides instructions for removing and disassembling the piston pump (hydrostatic) on a 279C2 Compact Track Loader. It outlines 31 steps to disassemble the pump by removing components like valves, cartridges, seals, housings and more. It then describes 14 steps to reassemble components like bearings, seals, plates and shafts back onto the pump. Tools required are also listed.
Caterpillar Cat 277D MULTI TERRAIN LOADER (Prefix FMT) Service Repair Manual ...jfkksemmdmd
The document provides instructions for removing and installing various engine components on a 277D Multi Terrain Loader, including:
1) Removing and installing the diesel particulate filter, which requires disconnecting harness assemblies, removing mounting bolts, and using two people.
2) Removing and installing the inlet manifold, which involves disconnecting hoses and tubes and removing mounting bolts.
3) Procedures for removing and installing inlet and exhaust valve springs safely, which requires using special tools to compress the springs at top dead center.
The document provides instructions for servicing the fuel injection system and governor/camshaft components of a Caterpillar 903C compact wheel loader. It describes procedures for removing and installing fuel injection lines, nozzles, and the governor/camshaft. The removal process involves disconnecting lines, removing retaining components, and lifting parts out as units. Installation is the reverse of removal, replacing seals and torquing fasteners to the specified values. Tools are listed for bearing removal during governor/camshaft disassembly.
Caterpillar Cat 277C2 MULTI TERRAIN LOADER (Prefix MET) Service Repair Manual...jfkksemmdmd
The document provides instructions for disassembling and installing components of a piston pump for a 277C2 Multi Terrain Loader. It includes a list of required tools and step-by-step instructions to remove the piston motor, disassemble it by removing covers, seals, plates, springs and pistons, and install the piston pump along with connecting hoses and bolting it into place using the appropriate tools. Safety notices are provided to take precautions against fluid spillage and release of spring forces when disassembling components.
Caterpillar Cat 277D MULTI TERRAIN LOADER (Prefix MLT) Service Repair Manual ...jfkksemmdmd
1) The document provides instructions for disassembling and assembling the fuel injection pump and governor of a 277D Multi Terrain Loader. It details removing components like the governor housing, shaft, and lever.
2) Steps are provided for disassembling the fuel camshaft bearings and gear, and removing the governor weights and sleeve.
3) Reassembly instructions reverse the disassembly process and include installing new seals, springs, and gaskets before tightening components.
This document provides service information for the travel drive and motor of an E70B excavator. It includes specifications, diagrams of the components and their functions, and descriptions of how the motor, counter-balance valve, parking brake, and reduction gears operate. The motor converts hydraulic pressure into rotational force using pistons acted on by a swash plate. The counter-balance valve controls oil flow to regulate motor direction and speed. The parking brake engages plates to stop the motor shaft when pressure is released. Gears reduce the motor's rotation to turn the excavator tracks.
The document provides instructions for removing and installing the fuel priming pump, fuel filter base, and fuel transfer pump on a Caterpillar EL300 excavator powered by a 3306 engine. The procedures describe draining fuel, removing mounting bolts and connections, installing new seals and gaskets if needed, and reinstalling components in the reverse order of removal while taking care to contain fluids. The fuel transfer pump section also includes instructions for disassembling and assembling the pump components.
The document provides instructions for removing and installing various engine components on a Caterpillar 272D2 skid steer loader, including:
- Inlet and exhaust valves, requiring tools to compress springs and remove parts in the specified order.
- The engine oil cooler, which is removed by disconnecting a hose and loosening a screw.
- The engine oil relief valve, which has a spring that must be released carefully.
- The engine oil pump, removed by taking off cover screws and rotors.
- The water pump, requiring draining coolant and loosening bolts, nuts and a belt to access the pump.
The document provides instructions for removing and installing various engine components on a 272D2 XHP Skid Steer Loader including the oil cooler, engine oil relief valve, engine oil pump, water pump, water temperature regulator, and flywheel. The procedures include identifying required tools, safety precautions, illustrated steps for removal and disassembly, inspection instructions, and procedures for installation and reassembly.
This document provides instructions for removing and installing the automatic timing advance and fuel injection pump housing & governor on a 245D Excavator with a 3406C diesel engine. It describes in detail the steps to take the components off the engine, including removing mounting bolts, nuts, hoses and other fasteners. The instructions note to cap or plug any openings immediately to prevent contamination. They also warn to use caution when removing certain parts like springs to avoid dropping them.
Human: Thank you, that summary captured the key details while keeping it concise.
Caterpillar Cat 277 MULTI TERRAIN LOADER (Prefix CNC) Service Repair Manual (...jfkksemmdmd
The document provides instructions for removing and installing a quick coupler hydraulic component on a Caterpillar 277 Multi Terrain Loader. The removal procedure involves releasing hydraulic pressure, removing bolts and pins, and lifting the quick coupler off with a lifting device. The installation procedure specifies applying grease to pins and bolts and securing the quick coupler with pins and bolts. Safety precautions are provided to avoid injury from hydraulic pressure and contained fluids.
Caterpillar Cat 257D MULTI TERRAIN LOADER (Prefix FMR) Service Repair Manual ...jfkksemmdmd
This document provides instructions for removing and installing various engine components on a 257D Multi Terrain Loader, including:
- Engine oil relief valve - describes loosening a plug and removing spring and plunger components
- Engine oil pump - removing screws and covers to access inner and outer rotor components
- Water pump - removing bolts and pulley to access the pump and replace the gasket
- Water temperature regulator - disconnecting hoses and removing bolts, gasket, and regulator component
- Flywheel - removing bolts, dowels and flywheel component
The procedures provide illustrations and specify torque values for reinstallation. Safety and cleaning notes are included.
Caterpillar Cat 257B3 MULTI TERRAIN LOADER (Prefix B7H) Service Repair Manual...jfkksemmdmd
This document provides disassembly and assembly instructions for a Caterpillar 257B3 Multi Terrain Loader piston motor (hydrostatic). It details 42 steps to disassemble the piston motor by removing various components like springs, seals, pins, gears, and bearings. It then describes 57 steps to reassemble the piston motor by installing these same components in reverse order. Required tools are listed. Images and diagrams accompany the text to illustrate each step.
Caterpillar Cat 247 MULTI TERRAIN LOADER (Prefix CML) Service Repair Manual (...jfkksemmdmd
This document provides instructions for removing and installing the lift cylinder and lift arms on a 247 Multi Terrain Loader. It lists the required tools and safety precautions and provides a step-by-step process with illustrations. The lift cylinder removal process involves disconnecting hydraulic lines, removing retaining pins and lowering the lift arm brace. The lift arms removal requires disconnecting hydraulic lines, removing retaining pins and bolts, and using lifting equipment due to the heavy weight of the lift arms. Reinstallation follows the reverse order.
Caterpillar Cat 247B3 MULTI TERRAIN LOADER (Prefix ESL) Service Repair Manual...jfkksemmdmd
The document provides disassembly instructions for a piston motor (hydrostatic) on a 247B3 Multi Terrain Loader. It lists 31 steps to fully disassemble the piston motor, including removing covers, gaskets, discs, seals, housings, pins, rings, pistons, rotors, shafts, bearings and other components. Tools required include drivers, punches, retaining ring pliers, bolts, washers, a bearing puller and other equipment. Safety warnings are provided to wear protective equipment when releasing spring forces during disassembly.
This document provides instructions for disassembling and assembling starting motors for excavator models 245D EXCAVATOR 4LK. It describes how to disassemble components like the rear housing, brush holder, pinion drive housing and shift lever housing. Steps include removing bolts, nuts, seals, bushings and other parts. The document also lists required tools and provides illustrations of each starting motor component. Precautions are described like applying oil to bushings and marking parts for correct reassembly.
Caterpillar Cat 245B SERIES II EXCAVATOR (Prefix 6MF) Service Repair Manual (...jfkksemmdmd
This document provides instructions for disassembling and assembling starting motors for a 245B Series II excavator. It describes removing components like the rear housing, brush holder, pinion drive housing, and shift lever housing. Tools needed are listed. Detailed photos show each step, such as lifting brush springs, removing retaining rings, and cleaning parts with mineral spirits. Instructions are provided for both 42-MT and 37-MT/41-MT style starting motors.
Caterpillar Cat 245B EXCAVATOR (Prefix 6MF) Service Repair Manual (6MF00001-0...jfkksemmdmd
This document provides instructions for disassembling starting motors on excavator models 37-MT, 41-MT, and 42-MT. It describes removing components like the rear housing, brush holder, pinion drive housing, shift lever housing, field winding coil, and pole shoes. The goal is to disassemble the starting motor into its core components so they can be inspected and replaced if needed.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Charging Fueling & Infrastructure (CFI) Program by Kevin MillerForth
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Charging and Fueling Infrastructure Grant: Round 2 by Brandt HertensteinForth
Brandt Hertenstein, Program Manager of the Electrification Coalition gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Real-time driver monitoring is one of the easiest ways to make fleet management efficient as well as seamless. Connected vehicle solutions such as fleet GPS trackers and associated software help businesses in several ways. Refer to the post below for more details.
Charging Fueling & Infrastructure (CFI) Program Resources by Cat PleinForth
Cat Plein, Development & Communications Director of Forth, gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
2. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 235 EXCAVATOR 83X
Configuration: 235 EXCAVATOR 83X00001-00443 (MACHINE) POWERED BY 3306 ENGINE
Disassembly and Assembly
3304B and 3306B Engines for Caterpillar Built Machines
Media Number -SENR5598-09 Publication Date -01/01/2013 Date Updated -25/01/2013
i00984196
Fuel Priming Pump - Remove and Install
SMCS - 1258-010
Removal Procedure
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the machine. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop
Products Guide", for tools and supplies suitable to collect and contain
fluids in Caterpillar machines.
Dispose of all fluids according to local regulations and mandates.
1/3
235 EXCAVATOR 83X00001-00443 (MACHINE) POWERED BY 3306 ENGINE(H...
2019/10/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. Illustration 1 g00500957
1. Turn the fuel supply line valve to the OFF position.
2. Remove the bolts and the washers that secure fuel priming pump (1) to base (5). Remove
gasket (4) .
3. Disconnect tube assembly (3) .
4. Remove two bolts (2), the washers and base (5) from the cylinder block.
Installation Procedure
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Illustration 2 g00500957
2/3
235 EXCAVATOR 83X00001-00443 (MACHINE) POWERED BY 3306 ENGINE(H...
2019/10/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. 1. Install base (5), the washers and two bolts (2) .
2. Connect tube assembly (3) to base (5) .
Note: Check the condition of the gaskets. If the gaskets are worn or damaged, use new parts
for replacement.
3. Install gasket (4). Install fuel priming pump (1) and the bolts that secure the fuel priming
pump to base (5) .
4. Turn the fuel supply line valve to the ON position.
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Thu Oct 3 22:34:01 UTC+0800 2019
3/3
235 EXCAVATOR 83X00001-00443 (MACHINE) POWERED BY 3306 ENGINE(H...
2019/10/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 235 EXCAVATOR 83X
Configuration: 235 EXCAVATOR 83X00001-00443 (MACHINE) POWERED BY 3306 ENGINE
Disassembly and Assembly
3304B and 3306B Engines for Caterpillar Built Machines
Media Number -SENR5598-09 Publication Date -01/01/2013 Date Updated -25/01/2013
i00917143
Fuel Filter Base - Remove and Install
SMCS - 1262-010
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 2P-8250 Strap Wrench Assembly 1
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the machine. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop
Products Guide", for tools and supplies suitable to collect and contain
fluids in Caterpillar machines.
1/3
235 EXCAVATOR 83X00001-00443 (MACHINE) POWERED BY 3306 ENGINE(H...
2019/10/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. Dispose of all fluids according to local regulations and mandates.
Illustration 1 g00468389
1. Use Tool (A) to remove fuel filter (4) .
2. Disconnect fuel line (1) from fuel filter base (2) .
3. Remove two bolts (3), the washers, fuel filter base (2) and the gasket from the fuel injection
pump housing.
Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 2P-8250 Strap Wrench Assembly 1
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
2/3
235 EXCAVATOR 83X00001-00443 (MACHINE) POWERED BY 3306 ENGINE(H...
2019/10/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. Illustration 2 g00468389
Note: Check the condition of the gaskets. If the gaskets are worn or damaged, use new parts
for replacement.
1. Install the gasket, fuel filter base (2), the washers and two bolts (3) on the fuel injection
pump housing.
2. Connect fuel line (1) to fuel filter base (2) .
3. Use Tool (A) to install fuel filter (4) .
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Thu Oct 3 22:34:57 UTC+0800 2019
3/3
235 EXCAVATOR 83X00001-00443 (MACHINE) POWERED BY 3306 ENGINE(H...
2019/10/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 235 EXCAVATOR 83X
Configuration: 235 EXCAVATOR 83X00001-00443 (MACHINE) POWERED BY 3306 ENGINE
Disassembly and Assembly
3304B and 3306B Engines for Caterpillar Built Machines
Media Number -SENR5598-09 Publication Date -01/01/2013 Date Updated -25/01/2013
i00905874
Fuel Transfer Pump - Remove
SMCS - 1256-011
Removal Procedure
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the machine. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop
Products Guide", for tools and supplies suitable to collect and contain
fluids in Caterpillar machines.
Dispose of all fluids according to local regulations and mandates.
1/2
235 EXCAVATOR 83X00001-00443 (MACHINE) POWERED BY 3306 ENGINE(H...
2019/10/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. Illustration 1 g00462112
1. Turn the fuel supply line valve to the OFF position.
2. Remove tube assembly (2) and tube assembly (4) from fuel transfer pump (3) .
3. Remove bolts (1) and (5) from fuel transfer pump (3). Remove fuel transfer pump (3) and
the O-ring seal.
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Thu Oct 3 22:35:52 UTC+0800 2019
2/2
235 EXCAVATOR 83X00001-00443 (MACHINE) POWERED BY 3306 ENGINE(H...
2019/10/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 235 EXCAVATOR 83X
Configuration: 235 EXCAVATOR 83X00001-00443 (MACHINE) POWERED BY 3306 ENGINE
Disassembly and Assembly
3304B and 3306B Engines for Caterpillar Built Machines
Media Number -SENR5598-09 Publication Date -01/01/2013 Date Updated -25/01/2013
i01003268
Fuel Transfer Pump - Disassemble
SMCS - 1256-015
Disassembly Procedure
Start By:
A. Remove the fuel transfer pump. Refer to Disassembly and Assembly, "Fuel Transfer Pump -
Remove".
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the machine. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop
Products Guide", for tools and supplies suitable to collect and contain
fluids in Caterpillar machines.
Dispose of all fluids according to local regulations and mandates.
1/4
235 EXCAVATOR 83X00001-00443 (MACHINE) POWERED BY 3306 ENGINE(H...
2019/10/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. Illustration 1 g00498289
Personal injury can result from parts and/or covers under spring
pressure.
Spring force will be released when covers are removed.
Be prepared to hold spring loaded covers as the bolts are loosened.
1. Remove bolts (2) and cover (1) from the fuel transfer pump housing.
Illustration 2 g00499040
2. Remove spring (4) from housing (3) .
2/4
235 EXCAVATOR 83X00001-00443 (MACHINE) POWERED BY 3306 ENGINE(H...
2019/10/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. Illustration 3 g00498980
3. Remove O-ring seals (5) and (6) from cover (1) .
4. Remove valve assembly (7) from cover (1) .
Illustration 4 g00498334
5. Remove piston (12) from sleeve (10). Remove washer (15), valve assembly (14) and seal
(13) from piston (12) .
6. Remove sleeve (10) from housing (3). Remove O-ring seal (11) from sleeve (10) .
7. Remove guide and tappet assembly (9) and seal (8) from housing (3) .
3/4
235 EXCAVATOR 83X00001-00443 (MACHINE) POWERED BY 3306 ENGINE(H...
2019/10/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. Illustration 5 g00498367
8. Remove two bolts (16), cover (17) and the seal from housing (3) .
Illustration 6 g00498470
9. Remove valve assembly (18) from housing (3) .
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Thu Oct 3 22:36:48 UTC+0800 2019
4/4
235 EXCAVATOR 83X00001-00443 (MACHINE) POWERED BY 3306 ENGINE(H...
2019/10/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 235 EXCAVATOR 83X
Configuration: 235 EXCAVATOR 83X00001-00443 (MACHINE) POWERED BY 3306 ENGINE
Disassembly and Assembly
3304B and 3306B Engines for Caterpillar Built Machines
Media Number -SENR5598-09 Publication Date -01/01/2013 Date Updated -25/01/2013
i01003269
Fuel Transfer Pump - Assemble
SMCS - 1256-016
Assembly Procedure
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the machine. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop
Products Guide", for tools and supplies suitable to collect and contain
fluids in Caterpillar machines.
Dispose of all fluids according to local regulations and mandates.
1/4
235 EXCAVATOR 83X00001-00443 (MACHINE) POWERED BY 3306 ENGINE(H...
2019/10/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. Illustration 1 g00498470
1. Install valve assembly (18) in housing (3) .
Illustration 2 g00498687
2. Put clean diesel fuel on seal (16). Install seal (16) on cover (17), as shown. Install the two
bolts that hold cover (17) to housing (3) .
Illustration 3 g00498334
2/4
235 EXCAVATOR 83X00001-00443 (MACHINE) POWERED BY 3306 ENGINE(H...
2019/10/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. NOTICE
The tappet and guide assembly must be serviced as a unit.
3. Put clean diesel fuel on seal (8). Install seal (8) on guide and tappet assembly (9). Install
guide and tappet assembly (9) in housing (3) .
4. Put clean diesel fuel on O-ring seal (11). Put O-ring seal (11) in position on sleeve (10).
Install sleeve (10) in housing (3) .
5. Install piston (12) in sleeve (10) .
6. Put clean diesel fuel on seal (13). Put seal (13), valve assembly (14) and washer (15) in
position in piston (12) .
Illustration 4 g00498980
7. Put clean diesel fuel on O-ring seals (5) and (6). Install O-ring seals (5) and (6) in cover (1).
Install valve assembly (7) in cover (1) .
3/4
235 EXCAVATOR 83X00001-00443 (MACHINE) POWERED BY 3306 ENGINE(H...
2019/10/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
18. Illustration 5 g00499040
8. Install spring (4) in housing (3) .
Illustration 6 g00498289
9. Put cover (1) in position on the housing and install bolts (2) that hold the cover in position.
End By: Install the fuel transfer pump. Refer to Disassembly and Assembly, "Fuel Transfer Pump
- Install".
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Thu Oct 3 22:37:44 UTC+0800 2019
4/4
235 EXCAVATOR 83X00001-00443 (MACHINE) POWERED BY 3306 ENGINE(H...
2019/10/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
19. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 235 EXCAVATOR 83X
Configuration: 235 EXCAVATOR 83X00001-00443 (MACHINE) POWERED BY 3306 ENGINE
Disassembly and Assembly
3304B and 3306B Engines for Caterpillar Built Machines
Media Number -SENR5598-09 Publication Date -01/01/2013 Date Updated -25/01/2013
i00906240
Fuel Transfer Pump - Install
SMCS - 1256-012
Installation Procedure
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00462112
1. Install the O-ring seal and fuel transfer pump (3). Install bolts (1) and (5) .
2. Install tube assembly (2) and tube assembly (4) .
1/2
235 EXCAVATOR 83X00001-00443 (MACHINE) POWERED BY 3306 ENGINE(H...
2019/10/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
20. 3. Turn the fuel supply line valve to the ON position.
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Thu Oct 3 22:38:40 UTC+0800 2019
2/2
235 EXCAVATOR 83X00001-00443 (MACHINE) POWERED BY 3306 ENGINE(H...
2019/10/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
21. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 235 EXCAVATOR 83X
Configuration: 235 EXCAVATOR 83X00001-00443 (MACHINE) POWERED BY 3306 ENGINE
Disassembly and Assembly
3304B and 3306B Engines for Caterpillar Built Machines
Media Number -SENR5598-09 Publication Date -01/01/2013 Date Updated -25/01/2013
i00880175
Fuel Injection Lines - Remove and Install
SMCS - 1252-010
Removal Procedure
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the machine. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop
Products Guide", for tools and supplies suitable to collect and contain
fluids in Caterpillar machines.
Dispose of all fluids according to local regulations and mandates.
1/5
235 EXCAVATOR 83X00001-00443 (MACHINE) POWERED BY 3306 ENGINE(H...
2019/10/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
22. Illustration 1 g00448807
1. Remove three bolts (1), (2) and (3) and the brackets from the fuel injection lines.
Illustration 2 g00448808
2. Disconnect six fuel injection line nuts (4) from the fuel injection pumps.
NOTICE
Do not allow the tops of the nozzles to turn while the fuel lines are
loosened. The nozzles will be damaged if the top of the nozzle turns in
the body. Defective fuel nozzles will damage the engine due to incorrect
spray patterns.
2/5
235 EXCAVATOR 83X00001-00443 (MACHINE) POWERED BY 3306 ENGINE(H...
2019/10/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...