The document provides instructions for disassembling and assembling components of the fuel system for a 235B Excavator. It describes how to remove and install the fuel priming pump, fuel filter base, and fuel transfer pump. The fuel transfer pump section details how to disassemble the pump by removing springs, seals, valves, pistons, and other internal parts. Proper cleanup and containment of fluids is emphasized throughout.
Caterpillar cat 235 b excavator (prefix 9pc) service repair manual (9pc00001...uujjfjjkskmme
The document provides instructions for disassembling and assembling components of the fuel system for a 235B Excavator. It describes how to remove and install the fuel priming pump, fuel filter base, and fuel transfer pump. The fuel transfer pump section details how to disassemble the pump by removing springs, seals, valves, pistons, and other internal parts. Proper cleanup and containment of fluids is emphasized throughout.
This document provides instructions for removing and installing the engine oil filter base and oil cooler on a Caterpillar C9 Industrial Engine. It outlines the necessary tools and safety precautions, and gives step-by-step instructions including illustrations of the process. The instructions cover draining coolant, removing bolts and parts, applying a new oil seal, reinstalling components and refilling the cooling system. A second section provides similar instructions for disassembling, cleaning and assembling the engine oil pump.
This document provides instructions for removing and installing the engine oil filter base and oil cooler on a Caterpillar C9 Industrial Engine. It outlines the necessary tools and safety precautions, and gives step-by-step instructions including illustrations of the process. The instructions note to drain coolant, remove bolts and parts, clean and apply new seals, and reinstall following the reverse order of removal. A second section provides similar instructions for disassembling and assembling the engine oil pump.
Caterpillar cat 322 c fm excavator (prefix c3r) service repair manual (c3r000...jfjskeksemmme
This document provides instructions for removing and installing a unit injector hydraulic pump on a 322C FM EXCAVATOR with a 3126B engine. The removal process involves disconnecting hoses and lines, removing bolts, and taking off the pump. Installation is the reverse of removal, and includes reconnecting hoses, bolts, and ensuring a tight seal. Proper cleaning and inspection of parts is emphasized. A separate section provides multi-step instructions for disassembling and assembling a turbocharger from the same excavator model.
This document provides instructions for removing and installing fuel lines, the fuel filter and water separator, fuel transfer pump, and electronic unit injectors on a C32 industrial engine.
The removal and installation procedures are described in detail with accompanying illustrations. Special tools required are listed. Safety precautions are outlined, such as containing fluids and keeping parts clean. Best practices are provided for installing fuel lines properly.
Caterpillar cat d30 d articulated truck (prefix 3aj) service repair manual (3...ufjdfjjkskemme
This document provides instructions for assembling and installing a fuel transfer pump on Caterpillar D25D and D30D articulated trucks. It describes 9 steps for assembling the pump components and ensuring proper lubrication with diesel fuel. The installation section notes to keep all parts clean and install the pump, attaching tubes and turning the fuel supply valve to the on position. Separate sections provide procedures for removing and installing fuel injection lines and nozzles, including required tools and safety notices.
Caterpillar cat 963 c track loader (prefix bbd) service repair manual (bbd000...ujdjfjjskekmm
This document provides instructions for removing and installing components on a Caterpillar 963C track loader powered by a 3126B engine, including:
- Removing and installing the fuel transfer pump.
- Removing and installing the fuel pressure regulator.
- Removing a unit injector by draining fluids, disconnecting electrical connections, and removing mounting hardware; and installing a unit injector by installing seals, mounting hardware, and electrical connections.
- The instructions include safety notices and lists of required tools. Detailed steps and illustrations are provided for each procedure.
Caterpillar cat 325 d l excavator (prefix erk) service repair manual (erk0000...hfjsekekmmd
This document provides instructions for removing and installing a unit injector sleeve and unit injector hydraulic pump on a Caterpillar 325D L excavator powered by a C7 engine. The removal process for the unit injector sleeve involves using various tools to cut threads in the sleeve and pull it out. The installation involves cleaning parts, applying sealant, and tapping the sleeve into place. The unit injector hydraulic pump removal involves disconnecting hoses and bolts, while installation connects hoses and bolts and applies grease to seals.
Caterpillar cat 235 b excavator (prefix 9pc) service repair manual (9pc00001...uujjfjjkskmme
The document provides instructions for disassembling and assembling components of the fuel system for a 235B Excavator. It describes how to remove and install the fuel priming pump, fuel filter base, and fuel transfer pump. The fuel transfer pump section details how to disassemble the pump by removing springs, seals, valves, pistons, and other internal parts. Proper cleanup and containment of fluids is emphasized throughout.
This document provides instructions for removing and installing the engine oil filter base and oil cooler on a Caterpillar C9 Industrial Engine. It outlines the necessary tools and safety precautions, and gives step-by-step instructions including illustrations of the process. The instructions cover draining coolant, removing bolts and parts, applying a new oil seal, reinstalling components and refilling the cooling system. A second section provides similar instructions for disassembling, cleaning and assembling the engine oil pump.
This document provides instructions for removing and installing the engine oil filter base and oil cooler on a Caterpillar C9 Industrial Engine. It outlines the necessary tools and safety precautions, and gives step-by-step instructions including illustrations of the process. The instructions note to drain coolant, remove bolts and parts, clean and apply new seals, and reinstall following the reverse order of removal. A second section provides similar instructions for disassembling and assembling the engine oil pump.
Caterpillar cat 322 c fm excavator (prefix c3r) service repair manual (c3r000...jfjskeksemmme
This document provides instructions for removing and installing a unit injector hydraulic pump on a 322C FM EXCAVATOR with a 3126B engine. The removal process involves disconnecting hoses and lines, removing bolts, and taking off the pump. Installation is the reverse of removal, and includes reconnecting hoses, bolts, and ensuring a tight seal. Proper cleaning and inspection of parts is emphasized. A separate section provides multi-step instructions for disassembling and assembling a turbocharger from the same excavator model.
This document provides instructions for removing and installing fuel lines, the fuel filter and water separator, fuel transfer pump, and electronic unit injectors on a C32 industrial engine.
The removal and installation procedures are described in detail with accompanying illustrations. Special tools required are listed. Safety precautions are outlined, such as containing fluids and keeping parts clean. Best practices are provided for installing fuel lines properly.
Caterpillar cat d30 d articulated truck (prefix 3aj) service repair manual (3...ufjdfjjkskemme
This document provides instructions for assembling and installing a fuel transfer pump on Caterpillar D25D and D30D articulated trucks. It describes 9 steps for assembling the pump components and ensuring proper lubrication with diesel fuel. The installation section notes to keep all parts clean and install the pump, attaching tubes and turning the fuel supply valve to the on position. Separate sections provide procedures for removing and installing fuel injection lines and nozzles, including required tools and safety notices.
Caterpillar cat 963 c track loader (prefix bbd) service repair manual (bbd000...ujdjfjjskekmm
This document provides instructions for removing and installing components on a Caterpillar 963C track loader powered by a 3126B engine, including:
- Removing and installing the fuel transfer pump.
- Removing and installing the fuel pressure regulator.
- Removing a unit injector by draining fluids, disconnecting electrical connections, and removing mounting hardware; and installing a unit injector by installing seals, mounting hardware, and electrical connections.
- The instructions include safety notices and lists of required tools. Detailed steps and illustrations are provided for each procedure.
Caterpillar cat 325 d l excavator (prefix erk) service repair manual (erk0000...hfjsekekmmd
This document provides instructions for removing and installing a unit injector sleeve and unit injector hydraulic pump on a Caterpillar 325D L excavator powered by a C7 engine. The removal process for the unit injector sleeve involves using various tools to cut threads in the sleeve and pull it out. The installation involves cleaning parts, applying sealant, and tapping the sleeve into place. The unit injector hydraulic pump removal involves disconnecting hoses and bolts, while installation connects hoses and bolts and applies grease to seals.
Caterpillar cat 235 b excavator (prefix 9pc) service repair manual (9pc00001...fujsekksmem
The document provides instructions for removing and installing the fuel priming pump, fuel filter base, and fuel transfer pump on a Caterpillar 235B EXCAVATOR. The removal procedures describe disconnecting fuel lines, removing mounting bolts and bases. The installation procedures describe cleaning parts, installing new gaskets if needed, reconnecting fuel lines and installing mounting bolts and bases. Safety notices are provided to keep parts clean and contain fluids.
This service manual document provides instructions for repairing and assembling components of a 225 excavator powered by a 3304 engine, including:
- Removing and installing the fuel priming pump
- Removing and installing the fuel filter base
- Removing the fuel transfer pump
- Disassembling and assembling the fuel transfer pump
The document provides detailed step-by-step instructions and illustrations for each procedure, with notices about keeping parts clean and containing fluids.
This service manual document provides instructions for repairing and assembling components of a 225 excavator powered by a 3304 engine, including:
- Removing and installing the fuel priming pump
- Removing and installing the fuel filter base
- Removing the fuel transfer pump
- Disassembling and assembling the fuel transfer pump
The document provides detailed step-by-step instructions and illustrations for each procedure, as well as safety notices to properly contain fluids and prevent contamination.
The document provides instructions for removing and installing components of the fuel system for a Caterpillar 3304 engine, including:
- Removing and installing the fuel priming pump
- Removing and installing the fuel filter base
- Removing the fuel transfer pump
- Disassembling the fuel transfer pump into its individual components
The instructions include safety notices and illustrations showing the component locations and removal/installation steps.
The document provides instructions for removing and installing various fuel system components on a Caterpillar 3306 engine, including:
- Removing and installing the fuel priming pump
- Removing and installing the fuel filter base
- Removing the fuel transfer pump
- Disassembling the fuel transfer pump
The instructions include safety notices and illustrations showing the component locations and removal/installation steps. Technicians are advised to clean parts and contain fluids properly during maintenance.
The document provides instructions for removing and installing the fuel priming pump, fuel filter base, and fuel transfer pump on a Caterpillar 3306 engine. The removal procedures describe disconnecting fuel lines, removing mounting bolts and other fasteners. The installation procedures specify cleaning parts and applying new gaskets or O-rings before reversing the removal steps. Dismantling and assembling the fuel transfer pump involves separating its components and ensuring seals are properly placed during reassembly.
The document provides instructions for removing and installing various fuel system components on a Caterpillar 3306 engine, including:
- Removing and installing the fuel priming pump
- Removing and installing the fuel filter base
- Removing the fuel transfer pump
- Disassembling the fuel transfer pump
The instructions include safety notices and illustrations showing the component locations and removal/installation steps. Technicians are advised to clean parts and contain fluids properly during maintenance.
Caterpillar Cat 225 EXCAVATOR (Prefix 76U) Service Repair Manual (76U02729-03...xiapokang564341
The document provides instructions for removing and installing various fuel system components on a Caterpillar 3304 engine, including:
- Removing and installing the fuel priming pump.
- Removing and installing the fuel filter base.
- Removing the fuel transfer pump.
- Disassembling and assembling the fuel transfer pump.
The instructions include illustrations showing the component locations and parts, and provide notices about cleaning parts and containing fluids. Removal and installation procedures are provided in step-by-step format.
Caterpillar Cat 225 EXCAVATOR (Prefix 76U) Service Repair Manual (76U02729-03...hvy7sbkw8e
The document provides instructions for removing and installing various fuel system components on a Caterpillar 3304 engine, including:
- Removing and installing the fuel priming pump
- Removing and installing the fuel filter base
- Removing the fuel transfer pump
- Disassembling the fuel transfer pump
The instructions include safety notices and illustrations showing the component locations and part names. Technicians are directed to clean all parts and contain fluids during repair or maintenance following the manufacturer's guidelines.
Caterpillar Cat 225 EXCAVATOR (Prefix 76U) Service Repair Manual (76U02729-03...wenxian17880
The document provides instructions for removing and installing various fuel system components on a Caterpillar 3304 engine, including:
- Removing and installing the fuel priming pump
- Removing and installing the fuel filter base
- Removing the fuel transfer pump
- Disassembling the fuel transfer pump
The instructions include safety notices and illustrations showing the component locations and part names. Technicians are directed to clean all parts and contain fluids during repair or maintenance following the manufacturer's guidelines.
This service repair manual provides instructions for removing and installing various fuel system components on a Caterpillar EL300 excavator powered by a 3306 engine. The document includes removal and installation procedures for the fuel priming pump, fuel filter base, and fuel transfer pump. Illustrations and part numbers are provided to identify the components. Safety notices recommend keeping parts clean and containing fluids to prevent contamination and protect the environment.
The document provides instructions for removing and installing the fuel priming pump, fuel filter base, and fuel transfer pump on an EL300 Excavator. The procedures include removing bolts, disconnecting tubes, and removing parts while taking precautions to contain fluids. Reinstallation involves cleaning parts, applying new gaskets or seals if needed, and reconnecting tubes before turning fuel valves back on. The fuel transfer pump section also provides instructions for disassembling and assembling the pump components.
This service repair manual provides instructions for removing and installing various fuel system components on a Caterpillar EL300 excavator powered by a 3306 engine. The document includes removal and installation procedures for the fuel priming pump, fuel filter base, and fuel transfer pump. Illustrations and part numbers are provided to identify the components. Safety notices recommend keeping parts clean and containing fluids to prevent contamination and protect the environment.
Caterpillar Cat 235 EXCAVATOR (Prefix 83X) Service Repair Manual (83X00001-00...xiapokang564341
The document provides instructions for removing and installing the fuel priming pump, fuel filter base, and fuel transfer pump on a Caterpillar 3306 engine. It includes safety notices and outlines the necessary tools, removal procedures with illustrations, and installation procedures with illustrations for each component. The fuel transfer pump section also provides instructions for disassembling and assembling the pump.
Caterpillar Cat 235 EXCAVATOR (Prefix 83X) Service Repair Manual (83X00001-00...hvy7sbkw8e
The document provides instructions for removing and installing the fuel priming pump, fuel filter base, and fuel transfer pump on a Caterpillar 3306 engine. It includes safety notices and outlines the necessary tools, removal procedures with illustrations, and installation procedures with illustrations for each component. The fuel transfer pump section also provides multi-step instructions for disassembling and assembling the pump.
Caterpillar Cat 235 EXCAVATOR (Prefix 83X) Service Repair Manual (83X00001-00...wenxian17880
The document provides instructions for removing and disassembling fuel system components on a Caterpillar 3306 engine, including:
- Removing the fuel priming pump by turning off the fuel supply, removing securing bolts and disconnecting tubes
- Removing the fuel filter base by disconnecting fuel lines and removing securing bolts
- Removing the fuel transfer pump by turning off the fuel supply and removing securing bolts and tubes
- Disassembling the fuel transfer pump by removing covers, springs, seals, valves and other internal components
The document provides instructions for removing and disassembling fuel system components on a Caterpillar 3306 engine, including:
- Removing the fuel priming pump by turning off the fuel supply, removing securing bolts and disconnecting tubes.
- Removing the fuel filter base by turning off the fuel supply, disconnecting lines, and removing bolts and washers.
- Removing the fuel transfer pump by turning off the fuel supply, disconnecting tubes, and removing securing bolts.
- Disassembling the fuel transfer pump by removing covers, springs, seals, valves, pistons, sleeves, and other internal components.
The document provides instructions for removing and disassembling fuel system components on a Caterpillar 3306 engine, including:
- Removing the fuel priming pump by turning off the fuel supply, removing securing bolts and disconnecting tubes.
- Removing the fuel filter base by turning off the fuel supply, disconnecting lines, and removing bolts and washers.
- Removing the fuel transfer pump by turning off the fuel supply, disconnecting tubes, and removing securing bolts.
- Disassembling the fuel transfer pump by removing covers, springs, seals, valves, pistons, sleeves, and other internal components.
This document provides instructions for removing and installing the fuel priming pump, fuel filter base, and fuel transfer pump on a Caterpillar 235D Excavator with a 3306 engine. The procedures describe draining fuel, removing mounting bolts and hoses, checking gaskets, and reinstalling components in the reverse order while taking precautions to contain fluids.
This document provides instructions for removing and installing the fuel priming pump, fuel filter base, and fuel transfer pump on a Caterpillar 235D Excavator with a 3306 engine. The procedures describe draining fuel, removing mounting bolts and connections, installing new seals and gaskets if needed, and reattaching components in the reverse order of removal. Disassembly and assembly of the fuel transfer pump is also outlined.
New holland w80 c tier 4b (final) compact wheel loader service repair manualfujsjefskekmm
1. Disconnect wiring harnesses, condenser hoses (if equipped), and rear lights. Remove engine hood and radiator grids.
2. Drain air conditioning system (if equipped) and disconnect fan connector. Remove condenser (if equipped).
3. Put battery main switch in OFF position. Secure engine hood with lifting strap before removing hood hinge bolts.
New holland w80 c tier 4 compact wheel loader service repair manualfujsjefskekmm
This document is a service manual for compact wheel loaders models W50C, W60C, W70C, and W80C. It contains sections on the engine, transmission, front and rear axle systems, brakes, hydraulic systems, frames and ballasting, steering, electrical systems, and cab. The manual provides maintenance and repair instructions for these components.
More Related Content
Similar to Caterpillar cat 235 b excavator (prefix 9pc) service repair manual (9pc00001 up)
Caterpillar cat 235 b excavator (prefix 9pc) service repair manual (9pc00001...fujsekksmem
The document provides instructions for removing and installing the fuel priming pump, fuel filter base, and fuel transfer pump on a Caterpillar 235B EXCAVATOR. The removal procedures describe disconnecting fuel lines, removing mounting bolts and bases. The installation procedures describe cleaning parts, installing new gaskets if needed, reconnecting fuel lines and installing mounting bolts and bases. Safety notices are provided to keep parts clean and contain fluids.
This service manual document provides instructions for repairing and assembling components of a 225 excavator powered by a 3304 engine, including:
- Removing and installing the fuel priming pump
- Removing and installing the fuel filter base
- Removing the fuel transfer pump
- Disassembling and assembling the fuel transfer pump
The document provides detailed step-by-step instructions and illustrations for each procedure, with notices about keeping parts clean and containing fluids.
This service manual document provides instructions for repairing and assembling components of a 225 excavator powered by a 3304 engine, including:
- Removing and installing the fuel priming pump
- Removing and installing the fuel filter base
- Removing the fuel transfer pump
- Disassembling and assembling the fuel transfer pump
The document provides detailed step-by-step instructions and illustrations for each procedure, as well as safety notices to properly contain fluids and prevent contamination.
The document provides instructions for removing and installing components of the fuel system for a Caterpillar 3304 engine, including:
- Removing and installing the fuel priming pump
- Removing and installing the fuel filter base
- Removing the fuel transfer pump
- Disassembling the fuel transfer pump into its individual components
The instructions include safety notices and illustrations showing the component locations and removal/installation steps.
The document provides instructions for removing and installing various fuel system components on a Caterpillar 3306 engine, including:
- Removing and installing the fuel priming pump
- Removing and installing the fuel filter base
- Removing the fuel transfer pump
- Disassembling the fuel transfer pump
The instructions include safety notices and illustrations showing the component locations and removal/installation steps. Technicians are advised to clean parts and contain fluids properly during maintenance.
The document provides instructions for removing and installing the fuel priming pump, fuel filter base, and fuel transfer pump on a Caterpillar 3306 engine. The removal procedures describe disconnecting fuel lines, removing mounting bolts and other fasteners. The installation procedures specify cleaning parts and applying new gaskets or O-rings before reversing the removal steps. Dismantling and assembling the fuel transfer pump involves separating its components and ensuring seals are properly placed during reassembly.
The document provides instructions for removing and installing various fuel system components on a Caterpillar 3306 engine, including:
- Removing and installing the fuel priming pump
- Removing and installing the fuel filter base
- Removing the fuel transfer pump
- Disassembling the fuel transfer pump
The instructions include safety notices and illustrations showing the component locations and removal/installation steps. Technicians are advised to clean parts and contain fluids properly during maintenance.
Caterpillar Cat 225 EXCAVATOR (Prefix 76U) Service Repair Manual (76U02729-03...xiapokang564341
The document provides instructions for removing and installing various fuel system components on a Caterpillar 3304 engine, including:
- Removing and installing the fuel priming pump.
- Removing and installing the fuel filter base.
- Removing the fuel transfer pump.
- Disassembling and assembling the fuel transfer pump.
The instructions include illustrations showing the component locations and parts, and provide notices about cleaning parts and containing fluids. Removal and installation procedures are provided in step-by-step format.
Caterpillar Cat 225 EXCAVATOR (Prefix 76U) Service Repair Manual (76U02729-03...hvy7sbkw8e
The document provides instructions for removing and installing various fuel system components on a Caterpillar 3304 engine, including:
- Removing and installing the fuel priming pump
- Removing and installing the fuel filter base
- Removing the fuel transfer pump
- Disassembling the fuel transfer pump
The instructions include safety notices and illustrations showing the component locations and part names. Technicians are directed to clean all parts and contain fluids during repair or maintenance following the manufacturer's guidelines.
Caterpillar Cat 225 EXCAVATOR (Prefix 76U) Service Repair Manual (76U02729-03...wenxian17880
The document provides instructions for removing and installing various fuel system components on a Caterpillar 3304 engine, including:
- Removing and installing the fuel priming pump
- Removing and installing the fuel filter base
- Removing the fuel transfer pump
- Disassembling the fuel transfer pump
The instructions include safety notices and illustrations showing the component locations and part names. Technicians are directed to clean all parts and contain fluids during repair or maintenance following the manufacturer's guidelines.
This service repair manual provides instructions for removing and installing various fuel system components on a Caterpillar EL300 excavator powered by a 3306 engine. The document includes removal and installation procedures for the fuel priming pump, fuel filter base, and fuel transfer pump. Illustrations and part numbers are provided to identify the components. Safety notices recommend keeping parts clean and containing fluids to prevent contamination and protect the environment.
The document provides instructions for removing and installing the fuel priming pump, fuel filter base, and fuel transfer pump on an EL300 Excavator. The procedures include removing bolts, disconnecting tubes, and removing parts while taking precautions to contain fluids. Reinstallation involves cleaning parts, applying new gaskets or seals if needed, and reconnecting tubes before turning fuel valves back on. The fuel transfer pump section also provides instructions for disassembling and assembling the pump components.
This service repair manual provides instructions for removing and installing various fuel system components on a Caterpillar EL300 excavator powered by a 3306 engine. The document includes removal and installation procedures for the fuel priming pump, fuel filter base, and fuel transfer pump. Illustrations and part numbers are provided to identify the components. Safety notices recommend keeping parts clean and containing fluids to prevent contamination and protect the environment.
Caterpillar Cat 235 EXCAVATOR (Prefix 83X) Service Repair Manual (83X00001-00...xiapokang564341
The document provides instructions for removing and installing the fuel priming pump, fuel filter base, and fuel transfer pump on a Caterpillar 3306 engine. It includes safety notices and outlines the necessary tools, removal procedures with illustrations, and installation procedures with illustrations for each component. The fuel transfer pump section also provides instructions for disassembling and assembling the pump.
Caterpillar Cat 235 EXCAVATOR (Prefix 83X) Service Repair Manual (83X00001-00...hvy7sbkw8e
The document provides instructions for removing and installing the fuel priming pump, fuel filter base, and fuel transfer pump on a Caterpillar 3306 engine. It includes safety notices and outlines the necessary tools, removal procedures with illustrations, and installation procedures with illustrations for each component. The fuel transfer pump section also provides multi-step instructions for disassembling and assembling the pump.
Caterpillar Cat 235 EXCAVATOR (Prefix 83X) Service Repair Manual (83X00001-00...wenxian17880
The document provides instructions for removing and disassembling fuel system components on a Caterpillar 3306 engine, including:
- Removing the fuel priming pump by turning off the fuel supply, removing securing bolts and disconnecting tubes
- Removing the fuel filter base by disconnecting fuel lines and removing securing bolts
- Removing the fuel transfer pump by turning off the fuel supply and removing securing bolts and tubes
- Disassembling the fuel transfer pump by removing covers, springs, seals, valves and other internal components
The document provides instructions for removing and disassembling fuel system components on a Caterpillar 3306 engine, including:
- Removing the fuel priming pump by turning off the fuel supply, removing securing bolts and disconnecting tubes.
- Removing the fuel filter base by turning off the fuel supply, disconnecting lines, and removing bolts and washers.
- Removing the fuel transfer pump by turning off the fuel supply, disconnecting tubes, and removing securing bolts.
- Disassembling the fuel transfer pump by removing covers, springs, seals, valves, pistons, sleeves, and other internal components.
The document provides instructions for removing and disassembling fuel system components on a Caterpillar 3306 engine, including:
- Removing the fuel priming pump by turning off the fuel supply, removing securing bolts and disconnecting tubes.
- Removing the fuel filter base by turning off the fuel supply, disconnecting lines, and removing bolts and washers.
- Removing the fuel transfer pump by turning off the fuel supply, disconnecting tubes, and removing securing bolts.
- Disassembling the fuel transfer pump by removing covers, springs, seals, valves, pistons, sleeves, and other internal components.
This document provides instructions for removing and installing the fuel priming pump, fuel filter base, and fuel transfer pump on a Caterpillar 235D Excavator with a 3306 engine. The procedures describe draining fuel, removing mounting bolts and hoses, checking gaskets, and reinstalling components in the reverse order while taking precautions to contain fluids.
This document provides instructions for removing and installing the fuel priming pump, fuel filter base, and fuel transfer pump on a Caterpillar 235D Excavator with a 3306 engine. The procedures describe draining fuel, removing mounting bolts and connections, installing new seals and gaskets if needed, and reattaching components in the reverse order of removal. Disassembly and assembly of the fuel transfer pump is also outlined.
Similar to Caterpillar cat 235 b excavator (prefix 9pc) service repair manual (9pc00001 up) (20)
New holland w80 c tier 4b (final) compact wheel loader service repair manualfujsjefskekmm
1. Disconnect wiring harnesses, condenser hoses (if equipped), and rear lights. Remove engine hood and radiator grids.
2. Drain air conditioning system (if equipped) and disconnect fan connector. Remove condenser (if equipped).
3. Put battery main switch in OFF position. Secure engine hood with lifting strap before removing hood hinge bolts.
New holland w80 c tier 4 compact wheel loader service repair manualfujsjefskekmm
This document is a service manual for compact wheel loaders models W50C, W60C, W70C, and W80C. It contains sections on the engine, transmission, front and rear axle systems, brakes, hydraulic systems, frames and ballasting, steering, electrical systems, and cab. The manual provides maintenance and repair instructions for these components.
New holland w70 c stage iiib compact wheel loader service repair manualfujsjefskekmm
This document is a service manual for CNH Industrial Italia S.p.A. compact wheel loaders models W50C, W60C, W70C, and W80C. It contains sections on the engine, four-wheel drive system, front and rear axle systems, hydrostatic drive, brakes and controls, hydraulic systems, frames and ballasting, steering, cab climate control, electrical systems, front loader and bucket, platform, cab, bodywork, and decals. The manual provides repair and maintenance instructions for technicians and mechanics.
New holland w70 wheel loader service repair manualfujsjefskekmm
The document is a workshop manual for wheel loaders that provides safety instructions for personnel. It contains sections on fundamental safety, operation safety, maintenance safety, repairs safety, and safety warnings. Personnel are instructed to carefully read all safety instructions, wear protective equipment, ensure only authorized trained staff perform repairs, and more. The workshop manual aims to protect operator safety and prevent accidents during operation and maintenance of the wheel loaders.
New holland tc5080 combine harvesters service repair manualfujsjefskekmm
This service manual provides information on servicing various components of TC5040, TC5050, TC5060, TC5070, TC5070, TC5080 Hillside, and TC5080 combines. The manual covers engines, transmissions, brakes, hydraulics, electrical systems, attachments, feeding, threshing, separation, cleaning, and other systems. Repair and maintenance should only be performed by trained technicians using the proper tools and procedures outlined in the manual. Unauthorized repairs may void warranties.
New holland tc5.90 hillside fpt nef 6 stage iv combine harvester service repa...fujsjefskekmm
This document is a service manual for various combine harvester models. It provides maintenance and repair instructions for the engine, transmission, axles, brakes, hydraulics, electrical systems, attachments, and other components. The manual includes an introduction with safety guidelines and a table of contents listing the major vehicle systems and associated part numbers covered.
New holland tc5.90 fpt nef tier 3 combine harvester service repair manualfujsjefskekmm
This document is a service manual for CNH Industrial combine harvesters including models TC4.90, TC5.70, TC5.80, TC5.90, and TC5.90 Hillside. The manual contains over 200 sections providing specifications, diagrams and repair instructions for the combine's engine, transmission, axles, brakes, hydraulics, electrical systems, attachments, and all major operating systems. Each section number links to detailed information on components and subsystems such as the engine, transmission, hydrostatic drive, steering, cab climate control, threshing drum, cleaning systems, and unloading systems.
New holland mc35 commercial mower service repair manualfujsjefskekmm
The document is a service manual for New Holland commercial mowers models MC22, MC28, and MC35. It contains sections covering general information, safety, specifications, maintenance and repair of engine, drivetrain, hydraulic and electrical systems. The manual provides technical details and instructions to properly service the mowers.
New holland l234 tier 4 b (final) skid steer loader service repair manual [nh...fujsjefskekmm
This document provides service information for New Holland 200 Series Skid Steer Loaders and Compact Track Loaders with Tier 4B diesel engines. It contains introduction information and sections covering the engine, power coupling, front and rear axle systems, hydrostatic drive, brakes and controls, hydraulic systems, front loader and bucket, cab, frames and ballasting, wheels, tracks and suspension, cab climate control, electrical systems, and fault codes. The document provides detailed procedures, part numbers, and diagrams for servicing and repairing components of these machines.
New holland d180 c stage iiib crawler dozer service repair manual (pin nedc18...fujsjefskekmm
This service manual section provides information for removing and installing the engine and crankcase assembly on a D180C crawler dozer. The 6-step removal process involves using lifting equipment to detach the engine from the frame mounts at the front and sides. Proper lifting points and balance of the 631 kg engine are emphasized for safety.
New holland d150 c stage iiib crawler dozer service repair manual (pin nedc15...fujsjefskekmm
This service manual provides information for servicing the following components of a D150C crawler dozer:
- Engine and related systems such as air cleaners, fuel filters, cooling and emissions systems
- Hydrostatic drive system
- Brakes and controls
- Hydraulic systems including cylinders, pumps and valves
- Tracks and track suspension
- Cab climate control and electrical systems
- Dozer blade and tools
- Cab, bodywork and decals
It provides removal and installation instructions as well as specifications for maintenance and repair of these components.
New holland cx5.90 laterale fpt nef 6 tier 4 b stage iv combine harvester ser...fujsjefskekmm
This document is a service manual for several combine models and their engines. It contains an introduction section listing the machine models covered and their engine types. The bulk of the document is a detailed table of contents that lists over 150 individual sections providing service information on the combines' systems and components, including the engine, transmission, hydraulics, steering, climate control, electrical systems, attachments, feeding, and threshing systems.
New holland cr940 combine harvesters service repair manualfujsjefskekmm
This document is a repair manual for New Holland combine harvesters models CR920 through CR980. It contains sections covering all major systems of the combines from general information and safety to the engine, transmission, hydraulics, electrics, grain handling and more. The manual provides instructions for troubleshooting, overhaul, and testing procedures for technicians to safely and efficiently service and repair the equipment.
New holland c238 tier 4 b (final) compact track loader service repair manual ...fujsjefskekmm
This document provides service information for New Holland 200 Series Skid Steer Loaders and Compact Track Loaders with Tier 4B diesel engines. It contains introduction information and sections covering the engine, power coupling, front and rear axle systems, hydrostatic drive, brakes and controls, hydraulic systems, front loader and bucket, cab, frames and ballasting, wheels, tracks and suspension, cab climate control, electrical systems, and fault codes. The document provides detailed procedures, part numbers, and diagrams for servicing and repairing components of these machines.
Case 621 f tier 4 wheel loader service repair manualfujsjefskekmm
The document provides instructions for removing the engine from a 621F wheel loader. Key steps include draining fluids, disconnecting batteries, removing the radiator cap and draining coolant, tagging wiring harnesses, removing hood mounting bolts, and lifting the engine out after disconnecting all connecting parts. Safety precautions are described such as releasing hydraulic pressure before removal.
New holland br6090 combi service repair manualfujsjefskekmm
This document provides a service manual for a BR6090 COMBI machine. It includes sections on hydraulic, pneumatic, electrical, electronic and other systems. It details components like the secondary hydraulic power system, electrical power system, lighting system, electronic system, lubrication system and more. It also covers the engine and PTO, transmission, process drive, axles, brakes, steering, wheels, frame, and crop processing functions. Torque specifications are provided for hardware.
New holland b100 btc backhoe loader service repair manualfujsjefskekmm
This document contains service manual sections for various backhoe loader models. It includes information on safety rules, maintenance, technical specifications, transmission systems, front axles, and other components. Technical specifications include details on the diesel engine, transmission, axles, brakes, steering, hydraulic system, buckets, tires, and machine dimensions and performance specs. The transmission and front axle sections provide specifications, lubrication instructions, removal/installation procedures, and troubleshooting guides.
New holland b100 blr backhoe loader service repair manualfujsjefskekmm
This document contains service manuals for various backhoe loader models including the B90B, B100B, B110B, and B115B. It includes sections on safety, maintenance, technical specifications, troubleshooting, and repair procedures for components like the transmission, axles, brakes, hydraulics, electrical systems, and attachments. The manuals provide information on lubrication, removal and installation of parts, disassembly and assembly of systems, and repair times for maintenance and repairs.
New holland b95 lr backhoe loader service repair manualfujsjefskekmm
The document provides instructions for inspecting and disassembling/assembling torque converters for backhoe loaders. It describes inspecting the converter hub splines and welds for wear or damage, and replacing the converter or drive plate if issues are found. The disassembly process involves removing the drive plate screws and plates and then the converter. Reassembly requires installing the converter on the input shaft, then the drive plates with screws tightened to a specified torque.
New holland b95 ctc tier 4b (final) tractor loader backhoe service repair manualfujsjefskekmm
This document is a service manual for New Holland tractor loader backhoes that covers specifications, maintenance, and repair procedures. It includes sections on the engine and fuel systems, transmission, axles, brakes, hydraulics, frames, steering, wheels, climate control, electrical systems, front loader/bucket, booms/dippers/buckets, and cab/bodywork. Safety precautions are provided to ensure safe operation and service of the equipment.
Charging Fueling & Infrastructure (CFI) Program by Kevin MillerForth
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Charging Fueling & Infrastructure (CFI) Program Resources by Cat PleinForth
Cat Plein, Development & Communications Director of Forth, gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
car rentals in nassau bahamas | atv rental nassau bahamasjustinwilson0857
At Dash Auto Sales & Car Rentals, we take pride in providing top-notch automotive services to residents and visitors alike in Nassau, Bahamas. Whether you're looking to purchase a vehicle, rent a car for your vacation, or embark on an exciting ATV adventure, we have you covered with our wide range of options and exceptional customer service.
Website: www.dashrentacarbah.com
Dahua provides a comprehensive guide on how to install their security camera systems. Learn about the different types of cameras and system components, as well as the installation process.
Charging and Fueling Infrastructure Grant: Round 2 by Brandt HertensteinForth
Brandt Hertenstein, Program Manager of the Electrification Coalition gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
2. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 235B EXCAVATOR 9PC
Configuration: 235B EXCAVATOR 9PC00001-UP (MACHINE) POWERED BY 3306 ENGINE
Disassembly and Assembly
3304B and 3306B Engines for Caterpillar Built Machines
Media Number -SENR5598-09 Publication Date -01/01/2013 Date Updated -25/01/2013
i00984196
Fuel Priming Pump - Remove and Install
SMCS - 1258-010
Removal Procedure
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the machine. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop
Products Guide", for tools and supplies suitable to collect and contain
fluids in Caterpillar machines.
Dispose of all fluids according to local regulations and mandates.
页码,1/3(W)w
2019/8/23https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
3. Illustration 1 g00500957
Turn the fuel supply line valve to the OFF position.1.
Remove the bolts and the washers that secure fuel priming pump (1) to base (5). Remove
gasket (4) .
2.
Disconnect tube assembly (3) .3.
Remove two bolts (2), the washers and base (5) from the cylinder block.4.
Installation Procedure
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Illustration 2 g00500957
Install base (5), the washers and two bolts (2) .1.
页码,2/3(W)w
2019/8/23https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
4. Connect tube assembly (3) to base (5) .2.
Note: Check the condition of the gaskets. If the gaskets are worn or damaged, use new parts
for replacement.
Install gasket (4). Install fuel priming pump (1) and the bolts that secure the fuel priming
pump to base (5) .
3.
Turn the fuel supply line valve to the ON position.4.
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Fri Aug 23 21:21:15 UTC+0800 2019
页码,3/3(W)w
2019/8/23https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
5. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 235B EXCAVATOR 9PC
Configuration: 235B EXCAVATOR 9PC00001-UP (MACHINE) POWERED BY 3306 ENGINE
Disassembly and Assembly
3304B and 3306B Engines for Caterpillar Built Machines
Media Number -SENR5598-09 Publication Date -01/01/2013 Date Updated -25/01/2013
i00917143
Fuel Filter Base - Remove and Install
SMCS - 1262-010
Removal Procedure
Required Tools
Tool Part Number Part Description Qty
A 2P-8250 Strap Wrench Assembly 1
Table 1
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the machine. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop
Products Guide", for tools and supplies suitable to collect and contain
fluids in Caterpillar machines.
Dispose of all fluids according to local regulations and mandates.
页码,1/3(W)w
2019/8/23https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
6. Illustration 1 g00468389
Use Tool (A) to remove fuel filter (4) .1.
Disconnect fuel line (1) from fuel filter base (2) .2.
Remove two bolts (3), the washers, fuel filter base (2) and the gasket from the fuel injection
pump housing.
3.
Installation Procedure
Required Tools
Tool Part Number Part Description Qty
A 2P-8250 Strap Wrench Assembly 1
Table 2
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
页码,2/3(W)w
2019/8/23https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
7. Illustration 2 g00468389
Note: Check the condition of the gaskets. If the gaskets are worn or damaged, use new parts
for replacement.
Install the gasket, fuel filter base (2), the washers and two bolts (3) on the fuel injection
pump housing.
1.
Connect fuel line (1) to fuel filter base (2) .2.
Use Tool (A) to install fuel filter (4) .3.
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Fri Aug 23 21:22:07 UTC+0800 2019
页码,3/3(W)w
2019/8/23https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
8. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 235B EXCAVATOR 9PC
Configuration: 235B EXCAVATOR 9PC00001-UP (MACHINE) POWERED BY 3306 ENGINE
Disassembly and Assembly
3304B and 3306B Engines for Caterpillar Built Machines
Media Number -SENR5598-09 Publication Date -01/01/2013 Date Updated -25/01/2013
i00905874
Fuel Transfer Pump - Remove
SMCS - 1256-011
Removal Procedure
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the machine. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop
Products Guide", for tools and supplies suitable to collect and contain
fluids in Caterpillar machines.
Dispose of all fluids according to local regulations and mandates.
页码,1/2(W)w
2019/8/23https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
9. Illustration 1 g00462112
Turn the fuel supply line valve to the OFF position.1.
Remove tube assembly (2) and tube assembly (4) from fuel transfer pump (3) .2.
Remove bolts (1) and (5) from fuel transfer pump (3). Remove fuel transfer pump (3) and
the O-ring seal.
3.
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Fri Aug 23 21:23:00 UTC+0800 2019
页码,2/2(W)w
2019/8/23https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
10. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 235B EXCAVATOR 9PC
Configuration: 235B EXCAVATOR 9PC00001-UP (MACHINE) POWERED BY 3306 ENGINE
Disassembly and Assembly
3304B and 3306B Engines for Caterpillar Built Machines
Media Number -SENR5598-09 Publication Date -01/01/2013 Date Updated -25/01/2013
i01003268
Fuel Transfer Pump - Disassemble
SMCS - 1256-015
Disassembly Procedure
Start By:
Remove the fuel transfer pump. Refer to Disassembly and Assembly, "Fuel Transfer Pump -
Remove".
A.
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the machine. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop
Products Guide", for tools and supplies suitable to collect and contain
fluids in Caterpillar machines.
Dispose of all fluids according to local regulations and mandates.
页码,1/4(W)w
2019/8/23https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
11. Illustration 1 g00498289
Personal injury can result from parts and/or covers under spring
pressure.
Spring force will be released when covers are removed.
Be prepared to hold spring loaded covers as the bolts are loosened.
Remove bolts (2) and cover (1) from the fuel transfer pump housing.1.
Illustration 2 g00499040
Remove spring (4) from housing (3) .2.
页码,2/4(W)w
2019/8/23https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
12. Illustration 3 g00498980
Remove O-ring seals (5) and (6) from cover (1) .3.
Remove valve assembly (7) from cover (1) .4.
Illustration 4 g00498334
Remove piston (12) from sleeve (10). Remove washer (15), valve assembly (14) and seal
(13) from piston (12) .
5.
Remove sleeve (10) from housing (3). Remove O-ring seal (11) from sleeve (10) .6.
Remove guide and tappet assembly (9) and seal (8) from housing (3) .7.
页码,3/4(W)w
2019/8/23https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
13. Illustration 5 g00498367
Remove two bolts (16), cover (17) and the seal from housing (3) .8.
Illustration 6 g00498470
Remove valve assembly (18) from housing (3) .9.
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Fri Aug 23 21:23:52 UTC+0800 2019
页码,4/4(W)w
2019/8/23https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
14. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 235B EXCAVATOR 9PC
Configuration: 235B EXCAVATOR 9PC00001-UP (MACHINE) POWERED BY 3306 ENGINE
Disassembly and Assembly
3304B and 3306B Engines for Caterpillar Built Machines
Media Number -SENR5598-09 Publication Date -01/01/2013 Date Updated -25/01/2013
i01003269
Fuel Transfer Pump - Assemble
SMCS - 1256-016
Assembly Procedure
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the machine. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop
Products Guide", for tools and supplies suitable to collect and contain
fluids in Caterpillar machines.
Dispose of all fluids according to local regulations and mandates.
页码,1/4(W)w
2019/8/23https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
15. Illustration 1 g00498470
Install valve assembly (18) in housing (3) .1.
Illustration 2 g00498687
Put clean diesel fuel on seal (16). Install seal (16) on cover (17), as shown. Install the two
bolts that hold cover (17) to housing (3) .
2.
Illustration 3 g00498334
NOTICE
The tappet and guide assembly must be serviced as a unit.
Put clean diesel fuel on seal (8). Install seal (8) on guide and tappet assembly (9). Install
guide and tappet assembly (9) in housing (3) .
3.
页码,2/4(W)w
2019/8/23https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
16. Put clean diesel fuel on O-ring seal (11). Put O-ring seal (11) in position on sleeve (10).
Install sleeve (10) in housing (3) .
4.
Install piston (12) in sleeve (10) .5.
Put clean diesel fuel on seal (13). Put seal (13), valve assembly (14) and washer (15) in
position in piston (12) .
6.
Illustration 4 g00498980
Put clean diesel fuel on O-ring seals (5) and (6). Install O-ring seals (5) and (6) in cover (1).
Install valve assembly (7) in cover (1) .
7.
Illustration 5 g00499040
Install spring (4) in housing (3) .8.
页码,3/4(W)w
2019/8/23https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
17. Illustration 6 g00498289
Put cover (1) in position on the housing and install bolts (2) that hold the cover in position.9.
End By: Install the fuel transfer pump. Refer to Disassembly and Assembly, "Fuel Transfer Pump
- Install".
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Fri Aug 23 21:24:45 UTC+0800 2019
页码,4/4(W)w
2019/8/23https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
18. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 235B EXCAVATOR 9PC
Configuration: 235B EXCAVATOR 9PC00001-UP (MACHINE) POWERED BY 3306 ENGINE
Disassembly and Assembly
3304B and 3306B Engines for Caterpillar Built Machines
Media Number -SENR5598-09 Publication Date -01/01/2013 Date Updated -25/01/2013
i00906240
Fuel Transfer Pump - Install
SMCS - 1256-012
Installation Procedure
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00462112
Install the O-ring seal and fuel transfer pump (3). Install bolts (1) and (5) .1.
Install tube assembly (2) and tube assembly (4) .2.
Turn the fuel supply line valve to the ON position.3.
页码,1/2(W)w
2019/8/23https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
19. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
20. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 235B EXCAVATOR 9PC
Configuration: 235B EXCAVATOR 9PC00001-UP (MACHINE) POWERED BY 3306 ENGINE
Disassembly and Assembly
3304B and 3306B Engines for Caterpillar Built Machines
Media Number -SENR5598-09 Publication Date -01/01/2013 Date Updated -25/01/2013
i00880175
Fuel Injection Lines - Remove and Install
SMCS - 1252-010
Removal Procedure
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the machine. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop
Products Guide", for tools and supplies suitable to collect and contain
fluids in Caterpillar machines.
Dispose of all fluids according to local regulations and mandates.
页码,1/5(W)w
2019/8/23https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
21. Illustration 1 g00448807
Remove three bolts (1), (2) and (3) and the brackets from the fuel injection lines.1.
Illustration 2 g00448808
Disconnect six fuel injection line nuts (4) from the fuel injection pumps.2.
NOTICE
Do not allow the tops of the nozzles to turn while the fuel lines are
loosened. The nozzles will be damaged if the top of the nozzle turns in
the body. Defective fuel nozzles will damage the engine due to incorrect
spray patterns.
页码,2/5(W)w
2019/8/23https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
22. Illustration 3 g00448809
Hold the tops of fuel injector nozzles (5) with a wrench, as shown. Loosen the six fuel
injection line nuts at fuel injector nozzles (4) .
3.
Disconnect the fuel injection line nuts at the fuel injector nozzles and remove the fuel
injection lines. Put caps and plugs on all openings immediately in order to prevent dirt from
contaminating the fuel system.
4.
Installation Procedure
Required Tools
Tool Part Number Part Description Qty
A 5P-0144 Fuel Line Socket 1
Table 1
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
NOTICE
Do not allow the tops of the nozzles to turn while the fuel lines are
loosened. The nozzles will be damaged if the top of the nozzle turns in
the body. Defective fuel nozzles will damage the engine due to incorrect
spray patterns.
页码,3/5(W)w
2019/8/23https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
23. Remove the protective covers from the fuel line connections. Place the fuel injection lines in
position on the engine. Tighten the fuel injection line nuts on the fuel injection pump and
the fuel injector nozzles finger tight.
1.
Note: The nozzle assembly must be supported with a wrench.
Illustration 4 g00448810
Hold the tops of fuel injector nozzles (1) and use Tool (A) in order to tighten the fuel
injection line nuts to a torque of 40 ± 7 N·m (30 ± 5 lb ft).
2.
Illustration 5 g00475542
Tighten six fuel injection line nuts (2) at the fuel injection pumps to a torque of 40 ± 7 N·m
(30 ± 5 lb ft).
3.
页码,4/5(W)w
2019/8/23https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...