The document provides instructions for removing and installing several fuel system components on a Caterpillar 3304 engine, including:
- The fuel priming pump, which is removed by disconnecting fuel lines and removing mounting bolts. It is installed by reversing the removal steps.
- The fuel filter base, which is removed by disconnecting fuel lines and removing mounting bolts. It is installed by reversing the removal steps.
- The fuel transfer pump, which is removed by disconnecting fuel lines and removing mounting bolts. Disassembly and assembly instructions are also provided.
The document provides instructions for removing and installing several fuel system components on a 225 excavator including:
- The fuel priming pump, including disconnecting lines and removing mounting bolts.
- The fuel filter base, involving removing bolts, lines, and filters.
- The fuel transfer pump, which has steps for removing mounting bolts and lines.
This service repair manual provides instructions for removing and installing various fuel system components on a Caterpillar 527 Track Skidder with a 3304 engine, including:
- The fuel priming pump, which is removed by disconnecting hoses and removing bolts securing it to the engine block.
- The fuel filter base, which is removed by disconnecting fuel lines and removing bolts securing it to the fuel injection pump housing.
- The fuel transfer pump, which is removed by disconnecting inlet and outlet hoses and removing bolts securing it to the engine block.
The manual provides detailed step-by-step instructions and illustrations for each removal and installation procedure. Safety and contamination prevention procedures
The document provides instructions for removing and installing the fuel priming pump, removing and installing the fuel filter base, and removing the fuel transfer pump from a Caterpillar 3306 engine. The procedures include:
- Turning off the fuel supply and disconnecting tubes and hoses
- Removing bolts and washers securing components and lifting parts off
- Checking condition of gaskets and installing new ones if needed
- Reinstalling components by securing with bolts and reconnecting tubes and hoses
The instructions emphasize cleaning parts and containing fluids during disassembly and reinstallation.
Caterpillar cat 235 d excavator (prefix 8kj) service repair manual (8kj00001 ...uudfjjjskkemmd
The document provides instructions for removing and disassembling the fuel transfer pump on a Caterpillar 235D Excavator with a 3306 engine. The removal procedure involves turning off the fuel supply, disconnecting tubes, and removing bolts to access the pump. The disassembly process describes removing springs, seals, sleeves, pistons, and other components from the pump housing. Safety notices are provided to keep parts clean and contain fluids during maintenance.
The document provides instructions for removing and installing the fuel ratio control and fuel shutoff solenoid on a Caterpillar 3306 engine. It details the removal and installation procedures in steps with illustrations. The procedures involve disconnecting lines, removing mounting bolts and nuts, cleaning parts, applying thread lock, and reinstalling in the reverse order. Special tools and safety precautions are noted to properly complete the tasks.
Caterpillar cat 322 c fm excavator (prefix c3r) service repair manual (c3r000...jfjskeksemmme
This document provides instructions for removing and installing a unit injector hydraulic pump on a 322C FM EXCAVATOR with a 3126B engine. The removal process involves disconnecting hoses and lines, removing bolts, and taking off the pump. Installation is the reverse of removal, and includes reconnecting hoses, bolts, and ensuring a tight seal. Proper cleaning and inspection of parts is emphasized. A separate section provides multi-step instructions for disassembling and assembling a turbocharger from the same excavator model.
This document provides instructions for removing and installing an engine oil relief valve on a Caterpillar 3064 or 3066 engine. It includes illustrations and steps to remove the threaded plug and shim that contain the valve from the cylinder block. Proper cleaning and containment of fluids is emphasized. The summary is completed in 3 sentences or less.
Caterpillar cat 160 g motor grader (prefix 4jd) service repair manual (4jd001...fjsjjefkskekm
The document provides instructions for removing and installing various fuel system components on a 160G Motor Grader with a 3306 engine, including the fuel priming pump, fuel filter base, and fuel transfer pump. The procedures describe disconnecting fuel lines, removing mounting bolts and other hardware, and ensuring that new gaskets are used when reinstalling components. Safety notices advise keeping parts clean and containing fluids to dispose of properly.
The document provides instructions for removing and installing several fuel system components on a 225 excavator including:
- The fuel priming pump, including disconnecting lines and removing mounting bolts.
- The fuel filter base, involving removing bolts, lines, and filters.
- The fuel transfer pump, which has steps for removing mounting bolts and lines.
This service repair manual provides instructions for removing and installing various fuel system components on a Caterpillar 527 Track Skidder with a 3304 engine, including:
- The fuel priming pump, which is removed by disconnecting hoses and removing bolts securing it to the engine block.
- The fuel filter base, which is removed by disconnecting fuel lines and removing bolts securing it to the fuel injection pump housing.
- The fuel transfer pump, which is removed by disconnecting inlet and outlet hoses and removing bolts securing it to the engine block.
The manual provides detailed step-by-step instructions and illustrations for each removal and installation procedure. Safety and contamination prevention procedures
The document provides instructions for removing and installing the fuel priming pump, removing and installing the fuel filter base, and removing the fuel transfer pump from a Caterpillar 3306 engine. The procedures include:
- Turning off the fuel supply and disconnecting tubes and hoses
- Removing bolts and washers securing components and lifting parts off
- Checking condition of gaskets and installing new ones if needed
- Reinstalling components by securing with bolts and reconnecting tubes and hoses
The instructions emphasize cleaning parts and containing fluids during disassembly and reinstallation.
Caterpillar cat 235 d excavator (prefix 8kj) service repair manual (8kj00001 ...uudfjjjskkemmd
The document provides instructions for removing and disassembling the fuel transfer pump on a Caterpillar 235D Excavator with a 3306 engine. The removal procedure involves turning off the fuel supply, disconnecting tubes, and removing bolts to access the pump. The disassembly process describes removing springs, seals, sleeves, pistons, and other components from the pump housing. Safety notices are provided to keep parts clean and contain fluids during maintenance.
The document provides instructions for removing and installing the fuel ratio control and fuel shutoff solenoid on a Caterpillar 3306 engine. It details the removal and installation procedures in steps with illustrations. The procedures involve disconnecting lines, removing mounting bolts and nuts, cleaning parts, applying thread lock, and reinstalling in the reverse order. Special tools and safety precautions are noted to properly complete the tasks.
Caterpillar cat 322 c fm excavator (prefix c3r) service repair manual (c3r000...jfjskeksemmme
This document provides instructions for removing and installing a unit injector hydraulic pump on a 322C FM EXCAVATOR with a 3126B engine. The removal process involves disconnecting hoses and lines, removing bolts, and taking off the pump. Installation is the reverse of removal, and includes reconnecting hoses, bolts, and ensuring a tight seal. Proper cleaning and inspection of parts is emphasized. A separate section provides multi-step instructions for disassembling and assembling a turbocharger from the same excavator model.
This document provides instructions for removing and installing an engine oil relief valve on a Caterpillar 3064 or 3066 engine. It includes illustrations and steps to remove the threaded plug and shim that contain the valve from the cylinder block. Proper cleaning and containment of fluids is emphasized. The summary is completed in 3 sentences or less.
Caterpillar cat 160 g motor grader (prefix 4jd) service repair manual (4jd001...fjsjjefkskekm
The document provides instructions for removing and installing various fuel system components on a 160G Motor Grader with a 3306 engine, including the fuel priming pump, fuel filter base, and fuel transfer pump. The procedures describe disconnecting fuel lines, removing mounting bolts and other hardware, and ensuring that new gaskets are used when reinstalling components. Safety notices advise keeping parts clean and containing fluids to dispose of properly.
The document provides instructions for removing and installing fuel system components on a 225 EXCAVATOR powered by a 3304 engine. It describes removing the fuel priming pump by disconnecting tubes and removing mounting bolts. It also details removing the fuel filter base by disconnecting fuel lines and removing mounting bolts. Finally, it explains removing the fuel transfer pump by disconnecting tubes and removing mounting bolts.
The document provides instructions for removing and installing several fuel system components on a 225 EXCAVATOR powered by a 3304 engine, including:
- Removing and installing the fuel priming pump
- Removing and installing the fuel filter base
- Removing the fuel transfer pump
- Disassembling and assembling the fuel transfer pump
The instructions include safety notices and illustrations showing the component locations and part names. Technicians are directed to clean parts with diesel fuel and replace any worn or damaged seals during the installation processes.
The document provides instructions for removing and installing several fuel system components on a 225 EXCAVATOR powered by a 3304 engine, including:
- Removing and installing the fuel priming pump
- Removing and installing the fuel filter base
- Removing the fuel transfer pump
- Disassembling and assembling the fuel transfer pump
The instructions include safety notices and illustrations showing the component locations and part names. Technicians are directed to clean parts with diesel fuel and replace any worn or damaged seals during installation.
The document provides instructions for removing and installing several fuel system components on a 225 EXCAVATOR powered by a 3304 engine, including:
- Removing and installing the fuel priming pump
- Removing and installing the fuel filter base
- Removing the fuel transfer pump
- Disassembling and assembling the fuel transfer pump
The instructions include safety notices and illustrations showing the component locations and part names. Technicians are directed to clean parts with diesel fuel and replace any worn or damaged seals during installation.
Caterpillar Cat 225 EXCAVATOR (Prefix 76U) Service Repair Manual (76U02729-03...fjskemmd4r
The document provides instructions for removing and installing several fuel system components on a 225 EXCAVATOR powered by a 3304 engine, including:
- Removing and installing the fuel priming pump
- Removing and installing the fuel filter base
- Removing the fuel transfer pump
- Disassembling and assembling the fuel transfer pump
The instructions include safety notices and illustrations showing the component locations and part names. Technicians are directed to clean parts with diesel fuel and replace any worn or damaged seals during installation.
Caterpillar Cat 225 EXCAVATOR (Prefix 76U) Service Repair Manual (76U02729-03...jfkksemmdmd
The document provides instructions for removing and installing several fuel system components on a 225 EXCAVATOR powered by a 3304 engine, including:
- Removing and installing the fuel priming pump
- Removing and installing the fuel filter base
- Removing the fuel transfer pump
- Disassembling and assembling the fuel transfer pump
The instructions include safety notices and illustrations showing the component locations and part names. Technicians are directed to clean parts with diesel fuel and replace any worn or damaged seals during installation.
Caterpillar Cat 225 EXCAVATOR (Prefix 76U) Service Repair Manual (76U02729-03...f8usjejkdmmd
The document provides instructions for removing and installing fuel system components on a 225 EXCAVATOR powered by a 3304 engine. It describes removing the fuel priming pump by disconnecting tubes and removing mounting bolts. It also details removing the fuel filter base by disconnecting fuel lines and removing mounting bolts. Finally, it explains removing the fuel transfer pump by disconnecting tubes and removing mounting bolts.
Caterpillar Cat 225 EXCAVATOR (Prefix 76U) Service Repair Manual (76U02729-03...ufjskekdjdmw2
The document provides instructions for removing and installing fuel system components on a 225 EXCAVATOR powered by a 3304 engine. It includes procedures for removing and installing the fuel priming pump, fuel filter base, fuel transfer pump, and disassembling the fuel transfer pump. Safety notices are provided to keep parts clean and contain fluids during maintenance.
Caterpillar Cat 225 EXCAVATOR (Prefix 76U) Service Repair Manual (76U02729-03...fujsked9dikdkd
The document provides instructions for removing and installing several fuel system components on a 225 EXCAVATOR powered by a 3304 engine, including:
- Removing and installing the fuel priming pump
- Removing and installing the fuel filter base
- Removing the fuel transfer pump
- Disassembling and assembling the fuel transfer pump
The instructions include safety notices and illustrations showing the component locations and part names. Technicians are directed to clean parts with diesel fuel and replace any worn or damaged seals during installation.
Caterpillar Cat 225 EXCAVATOR (Prefix 76U) Service Repair Manual (76U02729-03...gen78guozun
The document provides instructions for removing and installing several fuel system components on a 225 EXCAVATOR powered by a 3304 engine, including:
- Removing and installing the fuel priming pump
- Removing and installing the fuel filter base
- Removing the fuel transfer pump
- Disassembling and assembling the fuel transfer pump
The instructions include safety notices and illustrations showing the component locations and part names. Technicians are directed to clean parts with diesel fuel and replace any worn or damaged seals during installation.
The document provides instructions for removing and installing several fuel system components on a 225 excavator including:
- The fuel priming pump, including disconnecting lines and removing mounting bolts.
- The fuel filter base, involving removing bolts, lines, and filters.
- The fuel transfer pump, which has steps for removing mounting bolts and lines.
The document provides instructions for removing and installing several fuel system components on a 225 excavator including:
- The fuel priming pump, including disconnecting lines and removing mounting bolts.
- The fuel filter base, involving removing bolts, lines, and filters.
- The fuel transfer pump, which requires removing mounting bolts and disconnecting lines.
The document provides instructions for removing and disassembling components of the fuel transfer pump for a 225 EXCAVATOR powered by a 3304 engine, including:
- Removing the fuel transfer pump by disconnecting tubes and removing bolts.
- Disassembling the pump housing by removing the cover, spring, seals, valve assemblies, piston, sleeve, seals and bolts.
- Instructions specify cleaning parts and containing fluids during maintenance.
The document provides instructions for removing and installing several fuel system components on a 225 excavator including:
- The fuel priming pump, including disconnecting lines and removing mounting bolts.
- The fuel filter base, involving removing bolts, lines, and filters.
- The fuel transfer pump, which requires removing mounting bolts and disconnecting lines.
Caterpillar Cat 225 EXCAVATOR (Prefix 76U) Service Repair Manual (76U02729-03...xiapokang564341
The document provides instructions for removing and installing various fuel system components on a Caterpillar 3304 engine, including:
- Removing and installing the fuel priming pump.
- Removing and installing the fuel filter base.
- Removing the fuel transfer pump.
- Disassembling and assembling the fuel transfer pump.
The instructions include illustrations showing the component locations and parts, and provide notices about cleaning parts and containing fluids. Removal and installation procedures are provided in step-by-step format.
Caterpillar Cat 225 EXCAVATOR (Prefix 76U) Service Repair Manual (76U02729-03...hvy7sbkw8e
The document provides instructions for removing and installing various fuel system components on a Caterpillar 3304 engine, including:
- Removing and installing the fuel priming pump
- Removing and installing the fuel filter base
- Removing the fuel transfer pump
- Disassembling the fuel transfer pump
The instructions include safety notices and illustrations showing the component locations and part names. Technicians are directed to clean all parts and contain fluids during repair or maintenance following the manufacturer's guidelines.
Caterpillar Cat 225 EXCAVATOR (Prefix 76U) Service Repair Manual (76U02729-03...wenxian17880
The document provides instructions for removing and installing various fuel system components on a Caterpillar 3304 engine, including:
- Removing and installing the fuel priming pump
- Removing and installing the fuel filter base
- Removing the fuel transfer pump
- Disassembling the fuel transfer pump
The instructions include safety notices and illustrations showing the component locations and part names. Technicians are directed to clean all parts and contain fluids during repair or maintenance following the manufacturer's guidelines.
This document provides instructions for removing and disassembling the fuel transfer pump on a 225 EXCAVATOR powered by a 3304 engine. It describes removing the pump by disconnecting fuel lines and removing bolts. It then details disassembling the pump by removing springs, seals, valves, sleeves, pistons and other components. Precautions are provided to keep parts clean and contain fluids during maintenance.
The document provides instructions for removing and installing a fuel priming pump, fuel filter base, and fuel transfer pump on a 225 EXCAVATOR powered by a 3304 engine. The procedures include draining fuel, removing bolts and connections, installing new gaskets if needed, reconnecting lines and bolting components back into place. Safety notices are provided to keep parts clean and contain fluids during maintenance.
The document provides instructions for removing and installing a fuel priming pump, fuel filter base, and fuel transfer pump on a 225 EXCAVATOR powered by a 3304 engine. The procedures include draining fuel, removing bolts and connections, checking for worn gaskets, applying new seals and gaskets, and reinstalling components along with reconnecting fuel lines. Detailed illustrations are provided to identify the specific components and correct installation order. Safety notices recommend keeping parts clean and containing fluids during maintenance work.
New holland l221 tier 4 b (final) skid steer loader service repair manual [nh...fhshefjjskefkem
This document provides service information for New Holland compact track loaders and skid steer loaders, including:
- Procedures for draining engine oil either through a remote drain hose or a quick-disconnect fitting.
- Safety warnings for lifting heavy components, handling hot fluids, and avoiding skin contact with engine oil.
- Illustrations and part numbers for access covers, drain plugs, caps, and fittings involved in the oil drain process.
New holland d180 c tier 2 crawler dozer service repair manual (pin nddc18000 ...fhshefjjskefkem
This document is a service manual for a D180C tier 2 crawler dozer made by CNH Industrial for various international markets. It provides specifications and repair information for different configurations of the dozer that vary by blade type (bulldozer, power angle tilt, etc.), track type (long, extra long, low ground pressure), and market (Latin America, Australia, Asia, Middle East, Africa). The document links each product configuration to the engine model used, which is consistently listed as the F4HFA613N*E002 engine.
More Related Content
Similar to Caterpillar cat 225 excavator (prefix 76 u) service repair manual (76u02729 03764)
The document provides instructions for removing and installing fuel system components on a 225 EXCAVATOR powered by a 3304 engine. It describes removing the fuel priming pump by disconnecting tubes and removing mounting bolts. It also details removing the fuel filter base by disconnecting fuel lines and removing mounting bolts. Finally, it explains removing the fuel transfer pump by disconnecting tubes and removing mounting bolts.
The document provides instructions for removing and installing several fuel system components on a 225 EXCAVATOR powered by a 3304 engine, including:
- Removing and installing the fuel priming pump
- Removing and installing the fuel filter base
- Removing the fuel transfer pump
- Disassembling and assembling the fuel transfer pump
The instructions include safety notices and illustrations showing the component locations and part names. Technicians are directed to clean parts with diesel fuel and replace any worn or damaged seals during the installation processes.
The document provides instructions for removing and installing several fuel system components on a 225 EXCAVATOR powered by a 3304 engine, including:
- Removing and installing the fuel priming pump
- Removing and installing the fuel filter base
- Removing the fuel transfer pump
- Disassembling and assembling the fuel transfer pump
The instructions include safety notices and illustrations showing the component locations and part names. Technicians are directed to clean parts with diesel fuel and replace any worn or damaged seals during installation.
The document provides instructions for removing and installing several fuel system components on a 225 EXCAVATOR powered by a 3304 engine, including:
- Removing and installing the fuel priming pump
- Removing and installing the fuel filter base
- Removing the fuel transfer pump
- Disassembling and assembling the fuel transfer pump
The instructions include safety notices and illustrations showing the component locations and part names. Technicians are directed to clean parts with diesel fuel and replace any worn or damaged seals during installation.
Caterpillar Cat 225 EXCAVATOR (Prefix 76U) Service Repair Manual (76U02729-03...fjskemmd4r
The document provides instructions for removing and installing several fuel system components on a 225 EXCAVATOR powered by a 3304 engine, including:
- Removing and installing the fuel priming pump
- Removing and installing the fuel filter base
- Removing the fuel transfer pump
- Disassembling and assembling the fuel transfer pump
The instructions include safety notices and illustrations showing the component locations and part names. Technicians are directed to clean parts with diesel fuel and replace any worn or damaged seals during installation.
Caterpillar Cat 225 EXCAVATOR (Prefix 76U) Service Repair Manual (76U02729-03...jfkksemmdmd
The document provides instructions for removing and installing several fuel system components on a 225 EXCAVATOR powered by a 3304 engine, including:
- Removing and installing the fuel priming pump
- Removing and installing the fuel filter base
- Removing the fuel transfer pump
- Disassembling and assembling the fuel transfer pump
The instructions include safety notices and illustrations showing the component locations and part names. Technicians are directed to clean parts with diesel fuel and replace any worn or damaged seals during installation.
Caterpillar Cat 225 EXCAVATOR (Prefix 76U) Service Repair Manual (76U02729-03...f8usjejkdmmd
The document provides instructions for removing and installing fuel system components on a 225 EXCAVATOR powered by a 3304 engine. It describes removing the fuel priming pump by disconnecting tubes and removing mounting bolts. It also details removing the fuel filter base by disconnecting fuel lines and removing mounting bolts. Finally, it explains removing the fuel transfer pump by disconnecting tubes and removing mounting bolts.
Caterpillar Cat 225 EXCAVATOR (Prefix 76U) Service Repair Manual (76U02729-03...ufjskekdjdmw2
The document provides instructions for removing and installing fuel system components on a 225 EXCAVATOR powered by a 3304 engine. It includes procedures for removing and installing the fuel priming pump, fuel filter base, fuel transfer pump, and disassembling the fuel transfer pump. Safety notices are provided to keep parts clean and contain fluids during maintenance.
Caterpillar Cat 225 EXCAVATOR (Prefix 76U) Service Repair Manual (76U02729-03...fujsked9dikdkd
The document provides instructions for removing and installing several fuel system components on a 225 EXCAVATOR powered by a 3304 engine, including:
- Removing and installing the fuel priming pump
- Removing and installing the fuel filter base
- Removing the fuel transfer pump
- Disassembling and assembling the fuel transfer pump
The instructions include safety notices and illustrations showing the component locations and part names. Technicians are directed to clean parts with diesel fuel and replace any worn or damaged seals during installation.
Caterpillar Cat 225 EXCAVATOR (Prefix 76U) Service Repair Manual (76U02729-03...gen78guozun
The document provides instructions for removing and installing several fuel system components on a 225 EXCAVATOR powered by a 3304 engine, including:
- Removing and installing the fuel priming pump
- Removing and installing the fuel filter base
- Removing the fuel transfer pump
- Disassembling and assembling the fuel transfer pump
The instructions include safety notices and illustrations showing the component locations and part names. Technicians are directed to clean parts with diesel fuel and replace any worn or damaged seals during installation.
The document provides instructions for removing and installing several fuel system components on a 225 excavator including:
- The fuel priming pump, including disconnecting lines and removing mounting bolts.
- The fuel filter base, involving removing bolts, lines, and filters.
- The fuel transfer pump, which has steps for removing mounting bolts and lines.
The document provides instructions for removing and installing several fuel system components on a 225 excavator including:
- The fuel priming pump, including disconnecting lines and removing mounting bolts.
- The fuel filter base, involving removing bolts, lines, and filters.
- The fuel transfer pump, which requires removing mounting bolts and disconnecting lines.
The document provides instructions for removing and disassembling components of the fuel transfer pump for a 225 EXCAVATOR powered by a 3304 engine, including:
- Removing the fuel transfer pump by disconnecting tubes and removing bolts.
- Disassembling the pump housing by removing the cover, spring, seals, valve assemblies, piston, sleeve, seals and bolts.
- Instructions specify cleaning parts and containing fluids during maintenance.
The document provides instructions for removing and installing several fuel system components on a 225 excavator including:
- The fuel priming pump, including disconnecting lines and removing mounting bolts.
- The fuel filter base, involving removing bolts, lines, and filters.
- The fuel transfer pump, which requires removing mounting bolts and disconnecting lines.
Caterpillar Cat 225 EXCAVATOR (Prefix 76U) Service Repair Manual (76U02729-03...xiapokang564341
The document provides instructions for removing and installing various fuel system components on a Caterpillar 3304 engine, including:
- Removing and installing the fuel priming pump.
- Removing and installing the fuel filter base.
- Removing the fuel transfer pump.
- Disassembling and assembling the fuel transfer pump.
The instructions include illustrations showing the component locations and parts, and provide notices about cleaning parts and containing fluids. Removal and installation procedures are provided in step-by-step format.
Caterpillar Cat 225 EXCAVATOR (Prefix 76U) Service Repair Manual (76U02729-03...hvy7sbkw8e
The document provides instructions for removing and installing various fuel system components on a Caterpillar 3304 engine, including:
- Removing and installing the fuel priming pump
- Removing and installing the fuel filter base
- Removing the fuel transfer pump
- Disassembling the fuel transfer pump
The instructions include safety notices and illustrations showing the component locations and part names. Technicians are directed to clean all parts and contain fluids during repair or maintenance following the manufacturer's guidelines.
Caterpillar Cat 225 EXCAVATOR (Prefix 76U) Service Repair Manual (76U02729-03...wenxian17880
The document provides instructions for removing and installing various fuel system components on a Caterpillar 3304 engine, including:
- Removing and installing the fuel priming pump
- Removing and installing the fuel filter base
- Removing the fuel transfer pump
- Disassembling the fuel transfer pump
The instructions include safety notices and illustrations showing the component locations and part names. Technicians are directed to clean all parts and contain fluids during repair or maintenance following the manufacturer's guidelines.
This document provides instructions for removing and disassembling the fuel transfer pump on a 225 EXCAVATOR powered by a 3304 engine. It describes removing the pump by disconnecting fuel lines and removing bolts. It then details disassembling the pump by removing springs, seals, valves, sleeves, pistons and other components. Precautions are provided to keep parts clean and contain fluids during maintenance.
The document provides instructions for removing and installing a fuel priming pump, fuel filter base, and fuel transfer pump on a 225 EXCAVATOR powered by a 3304 engine. The procedures include draining fuel, removing bolts and connections, installing new gaskets if needed, reconnecting lines and bolting components back into place. Safety notices are provided to keep parts clean and contain fluids during maintenance.
The document provides instructions for removing and installing a fuel priming pump, fuel filter base, and fuel transfer pump on a 225 EXCAVATOR powered by a 3304 engine. The procedures include draining fuel, removing bolts and connections, checking for worn gaskets, applying new seals and gaskets, and reinstalling components along with reconnecting fuel lines. Detailed illustrations are provided to identify the specific components and correct installation order. Safety notices recommend keeping parts clean and containing fluids during maintenance work.
Similar to Caterpillar cat 225 excavator (prefix 76 u) service repair manual (76u02729 03764) (20)
New holland l221 tier 4 b (final) skid steer loader service repair manual [nh...fhshefjjskefkem
This document provides service information for New Holland compact track loaders and skid steer loaders, including:
- Procedures for draining engine oil either through a remote drain hose or a quick-disconnect fitting.
- Safety warnings for lifting heavy components, handling hot fluids, and avoiding skin contact with engine oil.
- Illustrations and part numbers for access covers, drain plugs, caps, and fittings involved in the oil drain process.
New holland d180 c tier 2 crawler dozer service repair manual (pin nddc18000 ...fhshefjjskefkem
This document is a service manual for a D180C tier 2 crawler dozer made by CNH Industrial for various international markets. It provides specifications and repair information for different configurations of the dozer that vary by blade type (bulldozer, power angle tilt, etc.), track type (long, extra long, low ground pressure), and market (Latin America, Australia, Asia, Middle East, Africa). The document links each product configuration to the engine model used, which is consistently listed as the F4HFA613N*E002 engine.
New holland d150 c tier 2 crawler dozer service repair manual (pin nfdc15000 ...fhshefjjskefkem
This document is a service manual for D150C Crawler Dozers that provides information on maintenance and repair of engine, hydrostatic drive, brakes and controls, hydraulic systems, tracks and track suspension, cab climate control, and electrical systems. It includes part numbers, product links to engine types, and table of contents that lists the sections and subsections covered for each system.
New holland cx8090 elevation combine harvesters service repair manualfhshefjjskefkem
This document is a service manual for CNH Industrial combine and tractor models CR8070, CR8080, CR9070, CR9080, CR9090, CX7080, CX7090, CX8070, CX8080, and CX8090. It contains sections covering the engine, transmission, axles, hydraulics, electrical systems, cab climate control, and attachments. The manual provides information on maintenance, troubleshooting, and repair of components.
New holland cx8030 combine harvesters service repair manualfhshefjjskefkem
The primary hydraulic power system uses a variable displacement pump to power the work hydraulics and steering. Oil is filtered and distributed to valves controlling header height, reel functions, and other components. It is linked to the hydrostatic system, sharing a reservoir and using hydrostatic return oil as charge pressure. Key components include the pump, filters, relief valves, and control valves.
New holland cx5090 tier 4 combine harvester service repair manualfhshefjjskefkem
The document is a service manual that provides information on hydraulic, pneumatic, electrical, and electronic systems for CX5000 and CX6000 series equipment. It includes:
- Specifications and torque values for hydraulic fittings and connections
- Details on the primary hydraulic power system, including locations and functions of key components like pumps, valves, cylinders, and reservoirs
- Schematics and diagrams showing hydraulic system layout and component locations
The manual provides technical data, descriptions of functionality, and service information on critical fluid power and electrical systems to support maintenance and repair of the equipment.
New holland cx8.90 combine harvesters service repair manualfhshefjjskefkem
This document is a service manual for CNH Industrial combine harvesters and covers models CX7.80 through CR10.90. It contains over 200 sections on the various systems of the combines, including the engine, transmission, hydraulics, electrical systems, attachments and more. Safety guidelines are provided at the beginning emphasizing disengaging machinery, reducing pressures, and using proper protective equipment during maintenance.
New holland cr8070 combine harvesters service repair manualfhshefjjskefkem
This document is a service manual for CNH Industrial combine harvesters and covers systems like the engine, transmission, hydraulic systems, electrical systems, and attachments. It provides information on maintenance, troubleshooting and repair for components and subsystems across different product models. The manual contains over 50 sections organized by technical area with detailed descriptions, specifications and procedures. It is intended to support service technicians in maintaining and repairing combine harvester equipment.
New holland c232 tier 4 b (final) compact track loader service repair manual ...fhshefjjskefkem
This document is a service manual for New Holland skid steer loaders and compact track loaders that meet Tier 4B emissions standards. It contains sections covering the engine, power coupling, front and rear axle systems, hydrostatic drive, brakes and controls, hydraulic systems, frames and ballasting, wheels, tracks and track suspension, cab climate control, electrical systems, front loader and bucket, and the platform, cab, bodywork and decals. The introduction emphasizes that all repair and maintenance work should only be performed by qualified dealership personnel using the proper procedures and tools outlined in the manual.
New holland b95 c four wheel drive (4wd) tier 4b (final) tractor loader backo...fhshefjjskefkem
This document is a service manual for B95C, B95C LR, B95C TC, and B110C Tier 4B (final) tractors and contains sections covering the engine, transmission, front and rear axles, brakes, hydraulic systems, frames, steering, wheels, cab climate control, electrical systems, front loader/bucket, booms/dippers/buckets, and platform/cab/bodywork. It provides repair and maintenance instructions, which should only be performed by qualified dealership personnel using the specified tools and procedures. The manufacturer will not be responsible for damages caused by unauthorized servicing.
Caterpillar cat 289 d compact track loader (prefix wct) service repair manual...fhshefjjskefkem
The document provides instructions for disassembling and assembling the piston pump (hydrostatic) of a 289D Compact Track Loader. The disassembly process involves using various tools to remove retaining rings, plates, springs, pistons, and bolts from the pump assembly. Detailed illustrations accompany each step. The assembly process reverses the disassembly steps and includes precautions like applying thread lock compound during reassembly.
Caterpillar cat 289 d compact track loader (prefix a9z) service repair manual...fhshefjjskefkem
This document provides instructions for removing and installing various engine components on a Caterpillar 289D compact track loader with a C3.3B engine. It describes removing and installing the crankshaft rear seal and wear sleeve, flywheel housing, crankshaft pulley, crankshaft front seal, and idler gear. The procedures provide illustrations and specify required tools and torque specifications where applicable. The document aims to guide maintenance and repair of these engine components.
Caterpillar cat 287 d multi terrain loader (prefix tlk) service repair manual...fhshefjjskefkem
The document provides instructions for disassembling and assembling the fuel injection pump and governor for a 287D Multi Terrain Loader with a C3.3B engine. It describes removing 17 parts including the governor housing, fuel camshaft, bearings and gears. It then describes assembling the components in the reverse order, noting to apply oil and torque bolts and nuts to the specified values. The document also includes instructions for installing the fuel injection pump and governor on the engine, attaching lines and covers.
Caterpillar cat 287 d multi terrain loader (prefix stk) service repair manual...fhshefjjskefkem
The document provides disassembly and assembly instructions for the piston pump of a 287D Multi Terrain Loader powered by a C3.3B engine. It lists 34 steps to disassemble the pump, removing components like valves, cartridges, seals, bearings and housings. It then lists 40 steps for reassembling the pump, providing details on cleaning, lubricating and torquing specific components like bolts, valves and housings. The document aims to guide the complete disassembly and reassembly of the loader's hydrostatic piston pump.
Caterpillar cat 287 d multi terrain loader (prefix hmt) service repair manual...fhshefjjskefkem
The document provides instructions for removing and installing various engine components on a 287D Multi Terrain Loader including:
1) Removing and installing the fuel injection pump, which requires disconnecting fuel lines and electrical connections, removing mounting nuts, and reinstalling in reverse.
2) Removing and installing electronic unit injectors, which requires removing mounting nuts and tubes, and installing new seals before reinstalling.
3) Removing and installing the turbocharger, which requires removing mounting bolts and nuts and installing with new gaskets.
4) Removing and installing the pressure sensor (mass air flow), which requires tilting the radiator for access.
Caterpillar cat 279 d compact track loader (prefix rcx) service repair manual...fhshefjjskefkem
This document provides instructions for removing and installing various engine components on a 279D Compact Track Loader with a C3.3B engine, including:
- Engine oil relief valve
- Engine oil pump
- Water pump
- Water temperature regulator
- Flywheel
The procedures describe removing and loosening bolts, removing parts, inspecting components for wear or damage, and installing parts in the reverse order of removal while applying grease or installing new gaskets as specified. Safety notices are included to contain fluids and wear protective equipment.
Caterpillar cat 279 d compact track loader (prefix ppt) service repair manual...fhshefjjskefkem
This document provides instructions for removing and installing a camshaft gear and engine oil pan on a Caterpillar 279D compact track loader. It also provides procedures for disassembling, inspecting, and reassembling pistons and connecting rods. The removal and installation procedures include lists of required tools and step-by-step instructions with accompanying illustrations. Safety notices are included to handle fluids properly and not reuse connecting rod bolts. Torque specifications are provided for connecting rod bolts for the C3.3B and C2.6 engines.
Caterpillar cat 279 d compact track loader (prefix gtl) service repair manual...fhshefjjskefkem
This document provides instructions for disassembling and assembling the piston pump of a 279D Compact Track Loader. It lists the required tools and presents a 34 step disassembly procedure involving removing components like valves, cartridges, seals, bearings, and housings. The 21 step assembly procedure describes installing these components in reverse order and includes tasks like applying thread lock compound and bench testing the pump before installation.
1982 johnson evinrude outboard 35 hp service repair manualfhshefjjskefkem
This short document repeats itself and encourages the reader to click a link for more information. It thanks the reader twice for reading and directs them to click a link in order to obtain additional information on an unspecified topic.
1982 johnson evinrude outboard 25 hp service repair manualfhshefjjskefkem
This short document repeats itself and encourages the reader to click a link for more information. It thanks the reader twice for reading and directs them to click a link in order to obtain additional information on an unspecified topic.
Charging and Fueling Infrastructure Grant: Round 2 by Brandt HertensteinForth
Brandt Hertenstein, Program Manager of the Electrification Coalition gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Charging Fueling & Infrastructure (CFI) Program Resources by Cat PleinForth
Cat Plein, Development & Communications Director of Forth, gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Dahua provides a comprehensive guide on how to install their security camera systems. Learn about the different types of cameras and system components, as well as the installation process.
Charging Fueling & Infrastructure (CFI) Program by Kevin MillerForth
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
2. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 225 EXCAVATOR 76U
Configuration: 225 EXCAVATOR 76U02729-03764 (MACHINE) POWERED BY 3304 ENGINE
Disassembly and Assembly
3304B and 3306B Engines for Caterpillar Built Machines
Media Number -SENR5598-09 Publication Date -01/01/2013 Date Updated -25/01/2013
i00984196
Fuel Priming Pump - Remove and Install
SMCS - 1258-010
Removal Procedure
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the machine. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop
Products Guide", for tools and supplies suitable to collect and contain
fluids in Caterpillar machines.
Dispose of all fluids according to local regulations and mandates.
1/3225 EXCAVATOR 76U02729-03764 (MACHINE) POWERED BY 3304 ENGINE(H...
2019/9/12https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. Illustration 1 g00500957
1. Turn the fuel supply line valve to the OFF position.
2. Remove the bolts and the washers that secure fuel priming pump (1) to base (5). Remove
gasket (4) .
3. Disconnect tube assembly (3) .
4. Remove two bolts (2), the washers and base (5) from the cylinder block.
Installation Procedure
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Illustration 2 g00500957
2/3225 EXCAVATOR 76U02729-03764 (MACHINE) POWERED BY 3304 ENGINE(H...
2019/9/12https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. 1. Install base (5), the washers and two bolts (2) .
2. Connect tube assembly (3) to base (5) .
Note: Check the condition of the gaskets. If the gaskets are worn or damaged, use new parts
for replacement.
3. Install gasket (4). Install fuel priming pump (1) and the bolts that secure the fuel priming
pump to base (5) .
4. Turn the fuel supply line valve to the ON position.
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Thu Sep 12 19:42:46 UTC+0800 2019
3/3225 EXCAVATOR 76U02729-03764 (MACHINE) POWERED BY 3304 ENGINE(H...
2019/9/12https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 225 EXCAVATOR 76U
Configuration: 225 EXCAVATOR 76U02729-03764 (MACHINE) POWERED BY 3304 ENGINE
Disassembly and Assembly
3304B and 3306B Engines for Caterpillar Built Machines
Media Number -SENR5598-09 Publication Date -01/01/2013 Date Updated -25/01/2013
i00917143
Fuel Filter Base - Remove and Install
SMCS - 1262-010
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 2P-8250 Strap Wrench Assembly 1
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the machine. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop
Products Guide", for tools and supplies suitable to collect and contain
fluids in Caterpillar machines.
1/3225 EXCAVATOR 76U02729-03764 (MACHINE) POWERED BY 3304 ENGINE(H...
2019/9/12https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. Dispose of all fluids according to local regulations and mandates.
Illustration 1 g00468389
1. Use Tool (A) to remove fuel filter (4) .
2. Disconnect fuel line (1) from fuel filter base (2) .
3. Remove two bolts (3), the washers, fuel filter base (2) and the gasket from the fuel injection
pump housing.
Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 2P-8250 Strap Wrench Assembly 1
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
2/3225 EXCAVATOR 76U02729-03764 (MACHINE) POWERED BY 3304 ENGINE(H...
2019/9/12https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. Illustration 2 g00468389
Note: Check the condition of the gaskets. If the gaskets are worn or damaged, use new parts
for replacement.
1. Install the gasket, fuel filter base (2), the washers and two bolts (3) on the fuel injection
pump housing.
2. Connect fuel line (1) to fuel filter base (2) .
3. Use Tool (A) to install fuel filter (4) .
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Thu Sep 12 19:43:42 UTC+0800 2019
3/3225 EXCAVATOR 76U02729-03764 (MACHINE) POWERED BY 3304 ENGINE(H...
2019/9/12https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 225 EXCAVATOR 76U
Configuration: 225 EXCAVATOR 76U02729-03764 (MACHINE) POWERED BY 3304 ENGINE
Disassembly and Assembly
3304B and 3306B Engines for Caterpillar Built Machines
Media Number -SENR5598-09 Publication Date -01/01/2013 Date Updated -25/01/2013
i00905874
Fuel Transfer Pump - Remove
SMCS - 1256-011
Removal Procedure
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the machine. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop
Products Guide", for tools and supplies suitable to collect and contain
fluids in Caterpillar machines.
Dispose of all fluids according to local regulations and mandates.
1/2225 EXCAVATOR 76U02729-03764 (MACHINE) POWERED BY 3304 ENGINE(H...
2019/9/12https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. Illustration 1 g00462112
1. Turn the fuel supply line valve to the OFF position.
2. Remove tube assembly (2) and tube assembly (4) from fuel transfer pump (3) .
3. Remove bolts (1) and (5) from fuel transfer pump (3). Remove fuel transfer pump (3) and
the O-ring seal.
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Thu Sep 12 19:44:38 UTC+0800 2019
2/2225 EXCAVATOR 76U02729-03764 (MACHINE) POWERED BY 3304 ENGINE(H...
2019/9/12https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 225 EXCAVATOR 76U
Configuration: 225 EXCAVATOR 76U02729-03764 (MACHINE) POWERED BY 3304 ENGINE
Disassembly and Assembly
3304B and 3306B Engines for Caterpillar Built Machines
Media Number -SENR5598-09 Publication Date -01/01/2013 Date Updated -25/01/2013
i01003268
Fuel Transfer Pump - Disassemble
SMCS - 1256-015
Disassembly Procedure
Start By:
A. Remove the fuel transfer pump. Refer to Disassembly and Assembly, "Fuel Transfer Pump -
Remove".
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the machine. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop
Products Guide", for tools and supplies suitable to collect and contain
fluids in Caterpillar machines.
Dispose of all fluids according to local regulations and mandates.
1/4225 EXCAVATOR 76U02729-03764 (MACHINE) POWERED BY 3304 ENGINE(H...
2019/9/12https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. Illustration 1 g00498289
Personal injury can result from parts and/or covers under spring
pressure.
Spring force will be released when covers are removed.
Be prepared to hold spring loaded covers as the bolts are loosened.
1. Remove bolts (2) and cover (1) from the fuel transfer pump housing.
Illustration 2 g00499040
2. Remove spring (4) from housing (3) .
2/4225 EXCAVATOR 76U02729-03764 (MACHINE) POWERED BY 3304 ENGINE(H...
2019/9/12https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. Illustration 3 g00498980
3. Remove O-ring seals (5) and (6) from cover (1) .
4. Remove valve assembly (7) from cover (1) .
Illustration 4 g00498334
5. Remove piston (12) from sleeve (10). Remove washer (15), valve assembly (14) and seal
(13) from piston (12) .
6. Remove sleeve (10) from housing (3). Remove O-ring seal (11) from sleeve (10) .
7. Remove guide and tappet assembly (9) and seal (8) from housing (3) .
3/4225 EXCAVATOR 76U02729-03764 (MACHINE) POWERED BY 3304 ENGINE(H...
2019/9/12https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. Illustration 5 g00498367
8. Remove two bolts (16), cover (17) and the seal from housing (3) .
Illustration 6 g00498470
9. Remove valve assembly (18) from housing (3) .
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Thu Sep 12 19:45:33 UTC+0800 2019
4/4225 EXCAVATOR 76U02729-03764 (MACHINE) POWERED BY 3304 ENGINE(H...
2019/9/12https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 225 EXCAVATOR 76U
Configuration: 225 EXCAVATOR 76U02729-03764 (MACHINE) POWERED BY 3304 ENGINE
Disassembly and Assembly
3304B and 3306B Engines for Caterpillar Built Machines
Media Number -SENR5598-09 Publication Date -01/01/2013 Date Updated -25/01/2013
i01003269
Fuel Transfer Pump - Assemble
SMCS - 1256-016
Assembly Procedure
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the machine. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop
Products Guide", for tools and supplies suitable to collect and contain
fluids in Caterpillar machines.
Dispose of all fluids according to local regulations and mandates.
1/4225 EXCAVATOR 76U02729-03764 (MACHINE) POWERED BY 3304 ENGINE(H...
2019/9/12https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. Illustration 1 g00498470
1. Install valve assembly (18) in housing (3) .
Illustration 2 g00498687
2. Put clean diesel fuel on seal (16). Install seal (16) on cover (17), as shown. Install the two
bolts that hold cover (17) to housing (3) .
Illustration 3 g00498334
2/4225 EXCAVATOR 76U02729-03764 (MACHINE) POWERED BY 3304 ENGINE(H...
2019/9/12https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. NOTICE
The tappet and guide assembly must be serviced as a unit.
3. Put clean diesel fuel on seal (8). Install seal (8) on guide and tappet assembly (9). Install
guide and tappet assembly (9) in housing (3) .
4. Put clean diesel fuel on O-ring seal (11). Put O-ring seal (11) in position on sleeve (10).
Install sleeve (10) in housing (3) .
5. Install piston (12) in sleeve (10) .
6. Put clean diesel fuel on seal (13). Put seal (13), valve assembly (14) and washer (15) in
position in piston (12) .
Illustration 4 g00498980
7. Put clean diesel fuel on O-ring seals (5) and (6). Install O-ring seals (5) and (6) in cover (1).
Install valve assembly (7) in cover (1) .
3/4225 EXCAVATOR 76U02729-03764 (MACHINE) POWERED BY 3304 ENGINE(H...
2019/9/12https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. Illustration 5 g00499040
8. Install spring (4) in housing (3) .
Illustration 6 g00498289
9. Put cover (1) in position on the housing and install bolts (2) that hold the cover in position.
End By: Install the fuel transfer pump. Refer to Disassembly and Assembly, "Fuel Transfer Pump
- Install".
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Thu Sep 12 19:46:29 UTC+0800 2019
4/4225 EXCAVATOR 76U02729-03764 (MACHINE) POWERED BY 3304 ENGINE(H...
2019/9/12https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 225 EXCAVATOR 76U
Configuration: 225 EXCAVATOR 76U02729-03764 (MACHINE) POWERED BY 3304 ENGINE
Disassembly and Assembly
3304B and 3306B Engines for Caterpillar Built Machines
Media Number -SENR5598-09 Publication Date -01/01/2013 Date Updated -25/01/2013
i00906240
Fuel Transfer Pump - Install
SMCS - 1256-012
Installation Procedure
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00462112
1. Install the O-ring seal and fuel transfer pump (3). Install bolts (1) and (5) .
2. Install tube assembly (2) and tube assembly (4) .
1/2225 EXCAVATOR 76U02729-03764 (MACHINE) POWERED BY 3304 ENGINE(H...
2019/9/12https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
19. 3. Turn the fuel supply line valve to the ON position.
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Thu Sep 12 19:47:25 UTC+0800 2019
2/2225 EXCAVATOR 76U02729-03764 (MACHINE) POWERED BY 3304 ENGINE(H...
2019/9/12https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
20. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
21. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 225 EXCAVATOR 76U
Configuration: 225 EXCAVATOR 76U02729-03764 (MACHINE) POWERED BY 3304 ENGINE
Disassembly and Assembly
3304B and 3306B Engines for Caterpillar Built Machines
Media Number -SENR5598-09 Publication Date -01/01/2013 Date Updated -25/01/2013
i00880175
Fuel Injection Lines - Remove and Install
SMCS - 1252-010
Removal Procedure
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the machine. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop
Products Guide", for tools and supplies suitable to collect and contain
fluids in Caterpillar machines.
Dispose of all fluids according to local regulations and mandates.
1/5225 EXCAVATOR 76U02729-03764 (MACHINE) POWERED BY 3304 ENGINE(H...
2019/9/12https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
22. Illustration 1 g00448807
1. Remove three bolts (1), (2) and (3) and the brackets from the fuel injection lines.
Illustration 2 g00448808
2. Disconnect six fuel injection line nuts (4) from the fuel injection pumps.
NOTICE
Do not allow the tops of the nozzles to turn while the fuel lines are
loosened. The nozzles will be damaged if the top of the nozzle turns in
the body. Defective fuel nozzles will damage the engine due to incorrect
spray patterns.
2/5225 EXCAVATOR 76U02729-03764 (MACHINE) POWERED BY 3304 ENGINE(H...
2019/9/12https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
23. Illustration 3 g00448809
3. Hold the tops of fuel injector nozzles (5) with a wrench, as shown. Loosen the six fuel
injection line nuts at fuel injector nozzles (4) .
4. Disconnect the fuel injection line nuts at the fuel injector nozzles and remove the fuel
injection lines. Put caps and plugs on all openings immediately in order to prevent dirt from
contaminating the fuel system.
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 5P-0144 Fuel Line Socket 1
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
NOTICE
Do not allow the tops of the nozzles to turn while the fuel lines are
loosened. The nozzles will be damaged if the top of the nozzle turns in
the body. Defective fuel nozzles will damage the engine due to incorrect
spray patterns.
3/5225 EXCAVATOR 76U02729-03764 (MACHINE) POWERED BY 3304 ENGINE(H...
2019/9/12https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
24. 1. Remove the protective covers from the fuel line connections. Place the fuel injection lines in
position on the engine. Tighten the fuel injection line nuts on the fuel injection pump and
the fuel injector nozzles finger tight.
Note: The nozzle assembly must be supported with a wrench.
Illustration 4 g00448810
2. Hold the tops of fuel injector nozzles (1) and use Tool (A) in order to tighten the fuel
injection line nuts to a torque of 40 ± 7 N·m (30 ± 5 lb ft).
Illustration 5 g00475542
3. Tighten six fuel injection line nuts (2) at the fuel injection pumps to a torque of 40 ± 7 N·m
(30 ± 5 lb ft).
4/5225 EXCAVATOR 76U02729-03764 (MACHINE) POWERED BY 3304 ENGINE(H...
2019/9/12https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
25. Illustration 6 g00475546
4. Install the brackets and three bolts (3), (4) and (5) that hold the fuel injection lines in
position.
5. Prime the fuel system. Refer to the Operation and Maintenance Manual, "Fuel System -
Prime" topic (Maintenance Section).
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Thu Sep 12 19:48:20 UTC+0800 2019
5/5225 EXCAVATOR 76U02729-03764 (MACHINE) POWERED BY 3304 ENGINE(H...
2019/9/12https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
26. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 225 EXCAVATOR 76U
Configuration: 225 EXCAVATOR 76U02729-03764 (MACHINE) POWERED BY 3304 ENGINE
Disassembly and Assembly
3304B and 3306B Engines for Caterpillar Built Machines
Media Number -SENR5598-09 Publication Date -01/01/2013 Date Updated -25/01/2013
i01048513
Fuel Injection Nozzles - Remove
SMCS - 1254-011
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 6V-6980 Fuel Nozzle Puller 1
B
FT-1533 Adapter 1
1P-0074 Slide Hammer Puller 1
Start By:
A. Remove the fuel injection lines. Refer to Disassembly and Assembly, "Fuel Injection Lines
- Remove and Install".
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
NOTICE
1/3225 EXCAVATOR 76U02729-03764 (MACHINE) POWERED BY 3304 ENGINE(H...
2019/9/12https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...