1) The document provides installation instructions for installing a circle assembly on a 140M Motor Grader. It details 26 steps for the installation, including installing bearings and wear strips, adjusting clearances, and ensuring free rotation of the circle.
2) Safety notices are included, such as releasing hydraulic pressure before working on components and using proper lifting equipment due to component weights.
3) Required tools are listed in a table, including pullers, stands, and lifting groups needed for the installation.
Caterpillar cat 140 m motor grader (prefix b9m) service repair manual (b9m000...fiksfejjsekkmme
1. The document provides installation instructions for installing a circle assembly on a 140M Motor Grader. It lists required tools and parts and provides detailed steps and illustrations for installing bearings, wear strips, plates, brackets and other components.
2. Safety notices are included, advising technicians to relieve pressure from hydraulic systems before working on components and ensure all fluids are contained.
3. The procedure has 26 steps for installing the circle assembly and adjusting clearances and measurements to ensure proper installation.
Caterpillar cat 140 g motor grader (prefix 72v) service repair manual (72v000...fusefjskekkmem
The document provides instructions for disassembling and assembling a transmission for a 140G motor grader. The key steps include:
1) Removing the transmission by draining fluids, disconnecting lines and hoses, and lifting it out of the machine.
2) Disassembling the transmission further by removing covers, links, plates and sleeves to access the internal components.
3) Reassembling the transmission involves installing components in reverse order and refilling fluids. Precise torques and clearances are specified.
Caterpillar cat 336 e l excavator (prefix cmr) service repair manual (cmr0000...fjskekmdm
This document provides the disassembly and assembly procedures for a 336E excavator travel motor. The disassembly procedure involves 27 steps to remove all components of the travel motor. Key steps include using an air pressure tool to remove the brake piston, pressing out bearing races, and removing springs. The assembly procedure reverses the disassembly process in 27 steps and provides details on lubricating parts and ensuring proper alignment of components like pistons and keys. Tools required include an adapter, nuts, washers, eyebolts, retaining ring pliers, a bearing puller, and Loctite.
Caterpillar cat 345 c l hydraulic excavator (prefix esd) service repair manua...hhfjksekmm
The document provides instructions for disassembling and assembling a travel motor. It begins with required tools and safety notices. The disassembly procedure has 31 steps that remove components like the head, plates, seals, pistons and housing pieces. The assembly procedure has 14 steps that install components in reverse order, noting to clean parts and apply lubricant before assembling. It emphasizes replacing all seals and O-rings with new parts.
Caterpillar cat 140 g motor grader (prefix 72v) service repair manual (72v042...fusefjskekkmem
This document provides instructions for removing and installing a camshaft on a Caterpillar 3306 engine. It describes in detail:
1) Marking the gears to ensure proper timing when reinstalling the camshaft.
2) Removing the camshaft bolts and carefully pulling out the camshaft.
3) Cleaning and lubricating the camshaft lobes and bearings before reinstalling.
4) Aligning the timing marks and installing the camshaft bolts to complete the process.
Caterpillar cat 305.5 e mini hydraulic excavator (prefix fky) service repair ...fusefjskekkmem
The document provides instructions for removing and installing various track components on a 305.5E Mini Hydraulic Excavator, including the front idler, recoil spring, hydraulic track adjuster, and sprocket. The procedures involve using lifting devices to handle heavy components, compressing recoil springs with special tools, and installing/removing seals, bolts, and brackets. Personal protective equipment is recommended when working with compressed springs.
Caterpillar cat 303.5 e mini hydraulic excavator (prefix rky) service repair ...yhhjjkfkseme
The document provides instructions for installing a hydraulic tank on a 303.5E Mini Hydraulic Excavator. The procedure involves 21 steps, including attaching lifting devices to the tank, installing it on the excavator, and reconnecting all hydraulic hoses and lines. Proper cleanliness and identification of all components is emphasized to prevent contamination of the hydraulic system.
Caterpillar cat 140 g motor grader (prefix 5md) service repair manual (5md000...fjjsefkksemme
This service repair manual provides instructions for disassembling and assembling various components of a 140G motor grader, including:
1) Removing and installing brake and wheel spindle housings, which includes releasing air pressure and removing nuts, guards, and air lines.
2) Removing and installing tandem housings, which are attached to the final drive housing with nuts.
3) Removing and installing drive sprockets by removing nuts with a tool and ensuring proper preload on bearings.
Caterpillar cat 140 m motor grader (prefix b9m) service repair manual (b9m000...fiksfejjsekkmme
1. The document provides installation instructions for installing a circle assembly on a 140M Motor Grader. It lists required tools and parts and provides detailed steps and illustrations for installing bearings, wear strips, plates, brackets and other components.
2. Safety notices are included, advising technicians to relieve pressure from hydraulic systems before working on components and ensure all fluids are contained.
3. The procedure has 26 steps for installing the circle assembly and adjusting clearances and measurements to ensure proper installation.
Caterpillar cat 140 g motor grader (prefix 72v) service repair manual (72v000...fusefjskekkmem
The document provides instructions for disassembling and assembling a transmission for a 140G motor grader. The key steps include:
1) Removing the transmission by draining fluids, disconnecting lines and hoses, and lifting it out of the machine.
2) Disassembling the transmission further by removing covers, links, plates and sleeves to access the internal components.
3) Reassembling the transmission involves installing components in reverse order and refilling fluids. Precise torques and clearances are specified.
Caterpillar cat 336 e l excavator (prefix cmr) service repair manual (cmr0000...fjskekmdm
This document provides the disassembly and assembly procedures for a 336E excavator travel motor. The disassembly procedure involves 27 steps to remove all components of the travel motor. Key steps include using an air pressure tool to remove the brake piston, pressing out bearing races, and removing springs. The assembly procedure reverses the disassembly process in 27 steps and provides details on lubricating parts and ensuring proper alignment of components like pistons and keys. Tools required include an adapter, nuts, washers, eyebolts, retaining ring pliers, a bearing puller, and Loctite.
Caterpillar cat 345 c l hydraulic excavator (prefix esd) service repair manua...hhfjksekmm
The document provides instructions for disassembling and assembling a travel motor. It begins with required tools and safety notices. The disassembly procedure has 31 steps that remove components like the head, plates, seals, pistons and housing pieces. The assembly procedure has 14 steps that install components in reverse order, noting to clean parts and apply lubricant before assembling. It emphasizes replacing all seals and O-rings with new parts.
Caterpillar cat 140 g motor grader (prefix 72v) service repair manual (72v042...fusefjskekkmem
This document provides instructions for removing and installing a camshaft on a Caterpillar 3306 engine. It describes in detail:
1) Marking the gears to ensure proper timing when reinstalling the camshaft.
2) Removing the camshaft bolts and carefully pulling out the camshaft.
3) Cleaning and lubricating the camshaft lobes and bearings before reinstalling.
4) Aligning the timing marks and installing the camshaft bolts to complete the process.
Caterpillar cat 305.5 e mini hydraulic excavator (prefix fky) service repair ...fusefjskekkmem
The document provides instructions for removing and installing various track components on a 305.5E Mini Hydraulic Excavator, including the front idler, recoil spring, hydraulic track adjuster, and sprocket. The procedures involve using lifting devices to handle heavy components, compressing recoil springs with special tools, and installing/removing seals, bolts, and brackets. Personal protective equipment is recommended when working with compressed springs.
Caterpillar cat 303.5 e mini hydraulic excavator (prefix rky) service repair ...yhhjjkfkseme
The document provides instructions for installing a hydraulic tank on a 303.5E Mini Hydraulic Excavator. The procedure involves 21 steps, including attaching lifting devices to the tank, installing it on the excavator, and reconnecting all hydraulic hoses and lines. Proper cleanliness and identification of all components is emphasized to prevent contamination of the hydraulic system.
Caterpillar cat 140 g motor grader (prefix 5md) service repair manual (5md000...fjjsefkksemme
This service repair manual provides instructions for disassembling and assembling various components of a 140G motor grader, including:
1) Removing and installing brake and wheel spindle housings, which includes releasing air pressure and removing nuts, guards, and air lines.
2) Removing and installing tandem housings, which are attached to the final drive housing with nuts.
3) Removing and installing drive sprockets by removing nuts with a tool and ensuring proper preload on bearings.
Caterpillar cat 301.7 d mini hydraulic excavator (prefix lj4) service repair ...ufjjsjefkksemm
This document provides instructions for removing and installing various components of a 301.7D Mini Hydraulic Excavator, including the engine, flywheel, hydraulic cylinders, blade, and bucket. It includes detailed removal and installation steps, specifications, torque values, and safety warnings for each component. Illustrations are provided to supplement the text instructions.
Caterpillar cat 336 e l excavator (prefix bzy) service repair manual (bzy0000...fjskekmdm
This document provides instructions for disassembling and assembling a 336E L excavator travel motor. The disassembly procedure involves 27 steps to remove components like the head, springs, brake piston, plates, and seals. The assembly procedure reverses the disassembly steps and includes lubricating components and ensuring proper alignment of parts like the cam plate and keys. Special tools are listed that are required for tasks like removing races and installing seals. Safety notices advise wearing protective equipment when working with spring-loaded parts.
Caterpillar cat 326 d2 l excavator (prefix jfg) service repair manual (jfg000...fjsjekkmdmme
This document provides disassembly instructions for a 326D2 excavator travel motor over 27 steps. It begins by having the technician remove the travel motor from the excavator and clean it. Then it details removing various components of the travel motor including the head, brake piston, plates, and bearings. Identification marks are recommended to ensure correct reassembly. Tools required are also listed.
Caterpillar cat 320 track type excavator (prefix 1 kl) service repair manual ...cdfzxs
This document provides instructions for removing and installing inlet and exhaust valves, valve guides, valve seat inserts, and valve seals on Caterpillar 3064 and 3066 engines. The procedures include using various specialty tools to compress springs, extract components, and properly seat new parts. Technicians are advised to keep components clean and lubricate parts during installation.
Komatsu sk510 5 skid steer loader service repair manual (sn 37 df00001 and up)fjsekkdmme
This document provides instructions and safety precautions for servicing a SK510-5 skid-steer loader. It contains sections on structure and function, testing and adjusting, disassembly and assembly, and maintenance standards. Safety must be the top priority when performing any repair work. Proper procedures and personal protective equipment should always be followed. The manual is intended to help technicians safely and effectively service the loader by providing technical information.
Komatsu ck25 1 skid steer loader service repair manual (sn f00003 and up)fjsekkdmme
This document provides safety instructions and guidelines for servicing CK25-1CRAWLER SKID-STEER LOADER equipment. It discusses general safety precautions, preparations for work, precautions during work, and instructions for hoisting heavy components. Safety symbols are defined that mark important safety points in the manual. The document instructs technicians to carefully follow all safety cautions, prepare work areas properly, use lifting equipment with sufficient capacity, and remove all potential hazards before performing any repairs or maintenance.
This document is a service manual for MerCruiser GM 4 cylinder 181 cid (3.0L) marine engines. It provides information on engine components, maintenance procedures, troubleshooting, removal and installation of engine systems, and specifications. Safety notices are included throughout to warn technicians of hazards.
Jcb ps760 transmission service repair manualufjjsjefkksemm
This service manual section provides information on servicing and repairing components of the JCB PS760, PS764, PS766 semi-automatic gearbox. The document covers general information, as well as procedures for clutches, solenoid valves, oil pumps, shafts, cases, and other components. Torque specifications and part numbers are included for repairs.
Jcb 3 cx backhoe loader service repair manual sn from 2442701 to 2451000fusefjskekkmem
This service manual section provides information on servicing the crankshaft and related components on a backhoe loader. It includes identification of parts, technical specifications, operation descriptions, removal and installation instructions, and check/inspection procedures. Proper cleaning and installation of the crankshaft oil seal is critical to prevent oil leakage. Removal and installation of the crankshaft requires carefully following all steps while ensuring components remain clean and undamaged.
Caterpillar cat 303.5 e mini hydraulic excavator (prefix rse) service repair ...fiskefjskemem
The document provides instructions for disassembling and assembling the swing motor and swing drive of a 303.5E Mini Hydraulic Excavator. It details 30 steps for disassembly, removing components like valves, springs, spools, check valves, bolts, plates and bearings. It then details 28 steps for assembly, installing the components in reverse order and noting tools and procedures needed.
Caterpillar cat 325 c excavator (prefix bla) service repair manual (bla00001 ...fjsekkdmme
This document provides instructions for removing and installing various components of a 325C excavator engine, including:
- The flywheel, using link brackets and guide studs.
- The crankshaft rear seal, using a drill bit, slide hammer, and distorter rings.
- The crankshaft rear seal carrier, which is removed after removing the flywheel housing.
- The flywheel housing, which is fastened using link brackets before removal.
Precautions are provided to keep parts clean and contain fluids during disassembly and reassembly. Required tools are listed for each procedure.
Caterpillar cat 140 h motor grader (prefix cca) service repair manual (cca000...fiskefjskemem
This document provides instructions for assembling a piston pump used in a 140H motor grader. It describes 58 steps to install various components like seals, springs, pins and manifolds. Special tools are required and cleanliness is important to prevent contamination. Finally, it notes the pump must be properly primed and broken in after assembly to avoid early failures.
Caterpillar cat 140 h motor grader (prefix 9zn) service repair manual (9zn000...ufjjsjefkksemm
This document provides instructions for installing connecting rod bearings and crankshaft main bearings on a 3306 engine. It describes cleaning and lubricating the bearings, inserting them into the connecting rods and crankcase, and checking clearances using tools like Plastigage. The bearings are installed in multiple steps to ensure proper alignment and torque specifications are followed.
Jcb 325 t skid steer loader service repair manual sn from 2476302 to 2477300fujsjefjskekmem
This service manual provides instructions for servicing JCB skid steer loaders and their components. It contains sections on machine systems and components including the engine, fuel system, cooling system, brakes, hydraulics and electrical system. The section summarized here provides instructions for removing and installing the crankshaft from the engine. It describes cleaning and inspecting the crankshaft, lists the required tools and consumables, and outlines the step-by-step removal and installation procedures. Precautions are given such as allowing the engine to cool before working on it and using lifting devices due to the heavy weight of components.
Caterpillar cat 140 g motor grader (prefix 13w) service repair manual (13w004...fiskefjskemem
This document provides instructions for removing and installing a hydraulic pump on a 140G motor grader. It describes:
1) Removing the hydraulic pump by disconnecting hoses, removing mounting bolts, and using a hoist to lift the pump off the machine.
2) Disassembling the pump by removing internal components like the valve block, springs, and bearing assemblies.
3) Reassembling the pump by installing internal components in reverse order and adjusting bearings to the proper specifications.
Caterpillar Cat 140M Motor Grader (Prefix B9M) Service Repair Manual Instant ...f8usejkdmmd8i
1. The document provides installation instructions for a circle drive on a 140M Motor Grader. It lists required tools and safety notices, and details 26 steps to install the circle drive, including installing bearings, shims, and wear strips.
2. The document also provides removal instructions for the drawbar of a 140M Motor Grader. It lists required tools and safety notices, and details 23 steps to remove the drawbar and associated components like the swivel, centershift cylinder, shoes, and circle drive if needed.
Caterpillar Cat 140M Motor Grader (Prefix B9M) Service Repair Manual (B9M0000...jfksemmdm3e
This document provides instructions for removing the drawbar from a 140M Motor Grader. It lists the required tools, gives safety warnings about hydraulic pressure, and outlines a 26-step procedure involving lowering the blade, removing bolts and pins, and using lifting equipment to remove the drawbar. Proper identification and plugging of hoses is noted to prevent fluid loss and contamination during the process.
Caterpillar Cat 140M Motor Grader (Prefix B9M) Service Repair Manual Instant ...ze6074xunong
This document provides instructions for removing the drawbar from a 140M Motor Grader. It lists the required tools, gives safety warnings about hydraulic pressure, and outlines a 26-step procedure involving lowering the blade, removing bolts and pins, and using lifting equipment to remove the drawbar. Proper identification and plugging of hoses is noted to prevent fluid loss and contamination during the process.
Caterpillar Cat 140M Motor Grader (Prefix B9M) Service Repair Manual (B9M0000...f7usueijdkdmm3e
This document provides instructions for removing the drawbar from a 140M Motor Grader. It lists the required tools, gives safety warnings about hydraulic pressure, and outlines a 26-step procedure involving lowering the blade, removing bolts and pins, and using lifting equipment to remove the drawbar. Proper identification and plugging of hoses is noted to prevent fluid loss and contamination during the process.
Caterpillar Cat 140M Motor Grader (Prefix B9M) Service Repair Manual (B9M0000...f7useijdkdmdm
1) The document provides installation instructions for a circle drive on a 140M Motor Grader, including removing the drawbar, installing various components like brackets and cylinders using specialized tools, and adjusting clearances and tolerances.
2) Over 20 steps are outlined to remove the drawbar, involving disconnecting hoses, removing mounting bolts and cylinders, and lifting out heavy components.
3) Precise measurements are checked during assembly to ensure proper functioning, such as adjusting set screws to achieve a maximum clearance of 0.8 mm between shoes and circle.
Caterpillar Cat 140M Motor Grader (Prefix B9M) Service Repair Manual (B9M0000...f8useudjkddmm2
This document provides instructions for removing the drawbar from a 140M Motor Grader. It lists the required tools, gives safety warnings about hydraulic pressure, and outlines a 26-step procedure involving lowering the blade, removing bolts and pins, and using lifting equipment to remove the drawbar. Proper identification and plugging of hoses is noted to prevent fluid loss and contamination during the process.
Caterpillar Cat 140M Motor Grader (Prefix B9M) Service Repair Manual (B9M0000...f8isekdodkdmd
This document provides instructions for removing the drawbar from a 140M Motor Grader. It lists the required tools, gives safety warnings about hydraulic pressure, and outlines a 26-step procedure involving lowering the blade, removing bolts and pins, and using lifting equipment to remove the drawbar. Proper identification and plugging of hoses is noted to prevent fluid loss and contamination during the process.
Caterpillar cat 301.7 d mini hydraulic excavator (prefix lj4) service repair ...ufjjsjefkksemm
This document provides instructions for removing and installing various components of a 301.7D Mini Hydraulic Excavator, including the engine, flywheel, hydraulic cylinders, blade, and bucket. It includes detailed removal and installation steps, specifications, torque values, and safety warnings for each component. Illustrations are provided to supplement the text instructions.
Caterpillar cat 336 e l excavator (prefix bzy) service repair manual (bzy0000...fjskekmdm
This document provides instructions for disassembling and assembling a 336E L excavator travel motor. The disassembly procedure involves 27 steps to remove components like the head, springs, brake piston, plates, and seals. The assembly procedure reverses the disassembly steps and includes lubricating components and ensuring proper alignment of parts like the cam plate and keys. Special tools are listed that are required for tasks like removing races and installing seals. Safety notices advise wearing protective equipment when working with spring-loaded parts.
Caterpillar cat 326 d2 l excavator (prefix jfg) service repair manual (jfg000...fjsjekkmdmme
This document provides disassembly instructions for a 326D2 excavator travel motor over 27 steps. It begins by having the technician remove the travel motor from the excavator and clean it. Then it details removing various components of the travel motor including the head, brake piston, plates, and bearings. Identification marks are recommended to ensure correct reassembly. Tools required are also listed.
Caterpillar cat 320 track type excavator (prefix 1 kl) service repair manual ...cdfzxs
This document provides instructions for removing and installing inlet and exhaust valves, valve guides, valve seat inserts, and valve seals on Caterpillar 3064 and 3066 engines. The procedures include using various specialty tools to compress springs, extract components, and properly seat new parts. Technicians are advised to keep components clean and lubricate parts during installation.
Komatsu sk510 5 skid steer loader service repair manual (sn 37 df00001 and up)fjsekkdmme
This document provides instructions and safety precautions for servicing a SK510-5 skid-steer loader. It contains sections on structure and function, testing and adjusting, disassembly and assembly, and maintenance standards. Safety must be the top priority when performing any repair work. Proper procedures and personal protective equipment should always be followed. The manual is intended to help technicians safely and effectively service the loader by providing technical information.
Komatsu ck25 1 skid steer loader service repair manual (sn f00003 and up)fjsekkdmme
This document provides safety instructions and guidelines for servicing CK25-1CRAWLER SKID-STEER LOADER equipment. It discusses general safety precautions, preparations for work, precautions during work, and instructions for hoisting heavy components. Safety symbols are defined that mark important safety points in the manual. The document instructs technicians to carefully follow all safety cautions, prepare work areas properly, use lifting equipment with sufficient capacity, and remove all potential hazards before performing any repairs or maintenance.
This document is a service manual for MerCruiser GM 4 cylinder 181 cid (3.0L) marine engines. It provides information on engine components, maintenance procedures, troubleshooting, removal and installation of engine systems, and specifications. Safety notices are included throughout to warn technicians of hazards.
Jcb ps760 transmission service repair manualufjjsjefkksemm
This service manual section provides information on servicing and repairing components of the JCB PS760, PS764, PS766 semi-automatic gearbox. The document covers general information, as well as procedures for clutches, solenoid valves, oil pumps, shafts, cases, and other components. Torque specifications and part numbers are included for repairs.
Jcb 3 cx backhoe loader service repair manual sn from 2442701 to 2451000fusefjskekkmem
This service manual section provides information on servicing the crankshaft and related components on a backhoe loader. It includes identification of parts, technical specifications, operation descriptions, removal and installation instructions, and check/inspection procedures. Proper cleaning and installation of the crankshaft oil seal is critical to prevent oil leakage. Removal and installation of the crankshaft requires carefully following all steps while ensuring components remain clean and undamaged.
Caterpillar cat 303.5 e mini hydraulic excavator (prefix rse) service repair ...fiskefjskemem
The document provides instructions for disassembling and assembling the swing motor and swing drive of a 303.5E Mini Hydraulic Excavator. It details 30 steps for disassembly, removing components like valves, springs, spools, check valves, bolts, plates and bearings. It then details 28 steps for assembly, installing the components in reverse order and noting tools and procedures needed.
Caterpillar cat 325 c excavator (prefix bla) service repair manual (bla00001 ...fjsekkdmme
This document provides instructions for removing and installing various components of a 325C excavator engine, including:
- The flywheel, using link brackets and guide studs.
- The crankshaft rear seal, using a drill bit, slide hammer, and distorter rings.
- The crankshaft rear seal carrier, which is removed after removing the flywheel housing.
- The flywheel housing, which is fastened using link brackets before removal.
Precautions are provided to keep parts clean and contain fluids during disassembly and reassembly. Required tools are listed for each procedure.
Caterpillar cat 140 h motor grader (prefix cca) service repair manual (cca000...fiskefjskemem
This document provides instructions for assembling a piston pump used in a 140H motor grader. It describes 58 steps to install various components like seals, springs, pins and manifolds. Special tools are required and cleanliness is important to prevent contamination. Finally, it notes the pump must be properly primed and broken in after assembly to avoid early failures.
Caterpillar cat 140 h motor grader (prefix 9zn) service repair manual (9zn000...ufjjsjefkksemm
This document provides instructions for installing connecting rod bearings and crankshaft main bearings on a 3306 engine. It describes cleaning and lubricating the bearings, inserting them into the connecting rods and crankcase, and checking clearances using tools like Plastigage. The bearings are installed in multiple steps to ensure proper alignment and torque specifications are followed.
Jcb 325 t skid steer loader service repair manual sn from 2476302 to 2477300fujsjefjskekmem
This service manual provides instructions for servicing JCB skid steer loaders and their components. It contains sections on machine systems and components including the engine, fuel system, cooling system, brakes, hydraulics and electrical system. The section summarized here provides instructions for removing and installing the crankshaft from the engine. It describes cleaning and inspecting the crankshaft, lists the required tools and consumables, and outlines the step-by-step removal and installation procedures. Precautions are given such as allowing the engine to cool before working on it and using lifting devices due to the heavy weight of components.
Caterpillar cat 140 g motor grader (prefix 13w) service repair manual (13w004...fiskefjskemem
This document provides instructions for removing and installing a hydraulic pump on a 140G motor grader. It describes:
1) Removing the hydraulic pump by disconnecting hoses, removing mounting bolts, and using a hoist to lift the pump off the machine.
2) Disassembling the pump by removing internal components like the valve block, springs, and bearing assemblies.
3) Reassembling the pump by installing internal components in reverse order and adjusting bearings to the proper specifications.
Caterpillar Cat 140M Motor Grader (Prefix B9M) Service Repair Manual Instant ...f8usejkdmmd8i
1. The document provides installation instructions for a circle drive on a 140M Motor Grader. It lists required tools and safety notices, and details 26 steps to install the circle drive, including installing bearings, shims, and wear strips.
2. The document also provides removal instructions for the drawbar of a 140M Motor Grader. It lists required tools and safety notices, and details 23 steps to remove the drawbar and associated components like the swivel, centershift cylinder, shoes, and circle drive if needed.
Caterpillar Cat 140M Motor Grader (Prefix B9M) Service Repair Manual (B9M0000...jfksemmdm3e
This document provides instructions for removing the drawbar from a 140M Motor Grader. It lists the required tools, gives safety warnings about hydraulic pressure, and outlines a 26-step procedure involving lowering the blade, removing bolts and pins, and using lifting equipment to remove the drawbar. Proper identification and plugging of hoses is noted to prevent fluid loss and contamination during the process.
Caterpillar Cat 140M Motor Grader (Prefix B9M) Service Repair Manual Instant ...ze6074xunong
This document provides instructions for removing the drawbar from a 140M Motor Grader. It lists the required tools, gives safety warnings about hydraulic pressure, and outlines a 26-step procedure involving lowering the blade, removing bolts and pins, and using lifting equipment to remove the drawbar. Proper identification and plugging of hoses is noted to prevent fluid loss and contamination during the process.
Caterpillar Cat 140M Motor Grader (Prefix B9M) Service Repair Manual (B9M0000...f7usueijdkdmm3e
This document provides instructions for removing the drawbar from a 140M Motor Grader. It lists the required tools, gives safety warnings about hydraulic pressure, and outlines a 26-step procedure involving lowering the blade, removing bolts and pins, and using lifting equipment to remove the drawbar. Proper identification and plugging of hoses is noted to prevent fluid loss and contamination during the process.
Caterpillar Cat 140M Motor Grader (Prefix B9M) Service Repair Manual (B9M0000...f7useijdkdmdm
1) The document provides installation instructions for a circle drive on a 140M Motor Grader, including removing the drawbar, installing various components like brackets and cylinders using specialized tools, and adjusting clearances and tolerances.
2) Over 20 steps are outlined to remove the drawbar, involving disconnecting hoses, removing mounting bolts and cylinders, and lifting out heavy components.
3) Precise measurements are checked during assembly to ensure proper functioning, such as adjusting set screws to achieve a maximum clearance of 0.8 mm between shoes and circle.
Caterpillar Cat 140M Motor Grader (Prefix B9M) Service Repair Manual (B9M0000...f8useudjkddmm2
This document provides instructions for removing the drawbar from a 140M Motor Grader. It lists the required tools, gives safety warnings about hydraulic pressure, and outlines a 26-step procedure involving lowering the blade, removing bolts and pins, and using lifting equipment to remove the drawbar. Proper identification and plugging of hoses is noted to prevent fluid loss and contamination during the process.
Caterpillar Cat 140M Motor Grader (Prefix B9M) Service Repair Manual (B9M0000...f8isekdodkdmd
This document provides instructions for removing the drawbar from a 140M Motor Grader. It lists the required tools, gives safety warnings about hydraulic pressure, and outlines a 26-step procedure involving lowering the blade, removing bolts and pins, and using lifting equipment to remove the drawbar. Proper identification and plugging of hoses is noted to prevent fluid loss and contamination during the process.
Caterpillar Cat 140M Motor Grader (Prefix B9M) Service Repair Manual (B9M0000...ufjskekdjdmw2
1) The document provides installation instructions for a circle drive on a 140M Motor Grader, including removing the drawbar, installing various components like brackets and cylinders using specialized tools, and adjusting clearances and tolerances.
2) Over 20 steps are outlined to remove the drawbar, involving disconnecting hoses, removing mounting bolts and cylinders, and lifting out heavy components.
3) Precise measurements are checked during assembly, such as circle clearance and shoe contact points, to ensure proper functioning of the circle drive.
Caterpillar Cat 140M Motor Grader (Prefix B9M) Service Repair Manual (B9M0000...cu393dumen
This document provides instructions for removing the drawbar from a 140M Motor Grader. It lists the required tools, gives safety warnings about hydraulic pressure, and outlines a 26-step procedure involving lowering the blade, removing bolts and pins, and using lifting equipment to remove the drawbar. Proper identification and plugging of hoses is noted to prevent fluid loss and contamination during the process.
Caterpillar Cat 140M Motor Grader (Prefix B9M) Service Repair Manual Instant ...hean57759707
1. The document provides installation instructions for a circle assembly on a 140M Motor Grader, including removing and installing various components like bearings, wear strips, and hydraulic cylinders using specialized tools.
2. The removal procedure for a drawbar includes disconnecting hydraulic hoses, removing mounting bolts/nuts, and lifting out heavy components like the drawbar and swivel using lifting devices and marked identification.
3. Safety precautions are provided, such as releasing hydraulic pressure, using lifting devices for heavy parts, and ensuring fluids are contained.
Caterpillar Cat 140M Motor Grader (Prefix B9M) Service Repair Manual (B9M0000...bvk2980022
1) The document provides installation instructions for a circle drive on a 140M Motor Grader, including removing the drawbar, installing various components like brackets and cylinders using specialized tools, and adjusting clearances and tolerances.
2) Over 20 steps are outlined to remove the drawbar, involving disconnecting hoses, removing mounting bolts and cylinders, and lifting out heavy components.
3) Precise measurements are checked during assembly to ensure proper functioning, such as adjusting set screws to achieve a maximum clearance of 0.8 mm between shoes and circle.
Caterpillar Cat 140M Motor Grader (Prefix B9M) Service Repair Manual Instant ...f8seodkdmdmed3
1. The document provides installation instructions for a circle assembly on a 140M Motor Grader. It lists required tools and safety notices, and details 26 steps for installing bearings, wear strips, plates, and hydraulic components on the circle assembly.
2. The instructions also describe removing a drawbar from the motor grader. It lists required tools and safety notices, and details 23 steps for removing hydraulic hoses and cylinders, shoes, and the drawbar itself using lifting devices.
3. The document is from a service repair manual and provides detailed disassembly and assembly instructions for replacing components on the circle assembly and removing the drawbar.
Caterpillar Cat 140M Motor Grader (Prefix B9M) Service Repair Manual (B9M0000...fujsekmdd8di
1) The document provides installation instructions for a circle drive on a 140M Motor Grader, including removing the drawbar, installing various components like brackets and cylinders using specialized tools, and adjusting clearances and tolerances.
2) Over 20 steps are outlined to remove the drawbar, involving disconnecting hoses, removing mounting bolts and cylinders, and lifting out heavy components carefully.
3) Reinstallation involves positioning various parts like shafts, plates, and brackets then reattaching hoses and cylinders, with the final steps adjusting clearances between parts on the circle drive.
Caterpillar Cat 140M Motor Grader (Prefix B9M) Service Repair Manual (B9M0000...fujskkmdmd
1) The document provides installation instructions for a circle drive on a 140M Motor Grader, including removing the drawbar, installing various components like brackets and cylinders using specialized tools, and adjusting clearances and tolerances.
2) Over 20 steps are outlined to remove the drawbar, involving disconnecting hoses, removing mounting bolts and cylinders, and lifting out heavy components.
3) Precise measurements are checked during assembly, such as circle clearance and shoe contact points, to ensure proper functioning of the circle drive.
Caterpillar Cat 140M Motor Grader (Prefix B9M) Service Repair Manual (B9M0000...fusekddmm3e
This document provides instructions for removing the drawbar from a 140M Motor Grader. It lists the required tools, gives safety warnings about hydraulic pressure, and outlines a 26-step procedure involving lowering the blade, removing bolts and pins, and using lifting equipment to remove the drawbar. Proper identification and plugging of hoses is noted to prevent fluid loss and contamination during the process.
Caterpillar Cat 140M Motor Grader (Prefix B9M) Service Repair Manual (B9M0000...gen78guozun
This document provides instructions for removing the drawbar from a 140M Motor Grader. It lists the required tools, gives safety warnings about hydraulic pressure, and outlines a 26-step procedure involving lowering the blade, removing bolts and pins, and using lifting equipment to remove the drawbar. Proper identification and plugging of hoses is noted to prevent fluid loss and contamination during the process.
Caterpillar Cat 140M Motor Grader (Prefix B9M) Service Repair Manual (B9M0000...fuskddmmd
1) The document provides installation instructions for a circle drive on a 140M Motor Grader, including removing the drawbar, installing various components like brackets and cylinders using specialized tools, and adjusting clearances and tolerances.
2) Over 25 steps are outlined to remove the drawbar, supporting components, shoes and wear strips before installing the circle drive, brackets, cylinders and making final adjustments.
3) Safety notices are included to release pressures, use lifting devices for heavy components, and ensure clearances are within specified tolerances when completing the circle drive installation.
Caterpillar Cat 160M Motor Grader (Prefix B9E) Service Repair Manual (B9E0000...jfksemmdm3e
This document provides instructions for removing and installing the blade lift cylinder and sideshift cylinder on a 160M Motor Grader. It lists the required tools and safety precautions. The procedures include releasing system pressure, disconnecting hoses, removing mounting bolts, and inspecting and reinstalling components with new seals and bearings as needed. Cleanliness and applying the proper lubricants are emphasized during assembly.
Caterpillar Cat 160M Motor Grader (Prefix B9E) Service Repair Manual (B9E0000...f8isekdodkdmd
This document provides instructions for removing and installing the blade lift cylinder and sideshift cylinder on a 160M Motor Grader. It lists the required tools and safety precautions. The blade lift cylinder removal process involves releasing system pressure, disconnecting hoses, and removing bolts and pins. The sideshift cylinder removal requires similar steps along with extending and retracting the cylinder. Both installation processes require reconnecting hoses and bolts in the reverse order.
Caterpillar Cat 160M Motor Grader (Prefix B9E) Service Repair Manual Instant ...hean57759707
This document provides instructions for removing and installing the blade lift cylinder and sideshift cylinder on a 160M Motor Grader. It lists the required tools and safety precautions. The blade lift cylinder removal process involves releasing system pressure, disconnecting hoses, and removing bolts and pins. The sideshift cylinder removal requires similar steps along with extending and retracting the cylinder. Both installation processes require reconnecting hoses and bolts in the reverse order. Cleanliness and applying lubricant to seals are emphasized.
Similar to Caterpillar cat 140 m motor grader (prefix b9m) service repair manual (b9m00001 and up) (20)
This document is an operation and maintenance manual for tractor models with cabs or ROPS frames. The manual contains sections on general information, instruments and controls, operation, maintenance and adjustments, electrical systems, specifications, hitches and implements, and an alphabetical index. Safety is emphasized throughout, including proper use of safety equipment, safety notes, and positions of safety decals.
This document is the operator's manual for McCormick CX75, CX85, CX95, and CX105 tractors. It discusses McCormick's commitment to quality, ensuring their tractors meet high standards. It also describes how authorized dealers will inspect tractors before delivery and provide instruction to new owners. The manual emphasizes that regular maintenance is important to maximize the value and reliability of a McCormick tractor over time. It provides a table of contents that separates the manual into sections covering introduction, safety, controls, operation, maintenance, and specifications.
Kubota v3800 di t-e3b diesel engine service repair manualjfjkskemem
This document provides specifications and maintenance information for several Kubota diesel engine models:
- It lists technical specifications such as engine type, displacement, power output, lubrication system, and dimensions for each model.
- The maintenance section outlines checklists and maintenance schedules, with inspection points divided into daily, 50-hour, 250-hour, 1000-hour, and longer intervals.
- Safety instructions are provided to warn technicians of hazards when servicing the engines.
Kioti daedong ex35 ch tractor parts catalogue manualjfjkskemem
The document provides instructions for using a service manual for Daedong machinery. It explains that the labor hours specified were carefully set based on experienced mechanics and are meant to standardize times across skill levels and regions. It also lists several rules for selecting appropriate job codes when submitting warranty requests, such as only using one code per repair and not combining codes if one is included in another. Failure to follow the instructions could result in warranty claim rejection.
The document provides an owner's manual for a KIOTI DX7510/DX9010 Power Shuttle tractor. It begins by welcoming the owner and describing the design and quality control of the tractor. It explains that knowledge of safe operation is important for dependable service. The manual aims to help owners familiarize themselves with the tractor's features and operation, and to contact the dealer if they have any other questions. It then provides a table of contents that lists sections covering safety precautions, specifications, operating systems, operation, maintenance, troubleshooting, and more.
Kioti daedong dk751 c tractor parts catalogue manualjfjkskemem
This document provides instructions and a table of contents for a tractor parts list manual. The instructions explain that the parts list is organized into groups and sub-groups with identifying codes and numbers. It also provides guidance on using the parts list for ordering parts and making repairs. The table of contents lists over 30 engine, drivetrain, and auxiliary system groups that are detailed further in the full manual.
Kioti daedong dk451 tractor parts catalogue manualjfjkskemem
This manual provides standard operation times for servicing jobs on Daedong tractors. It instructs technicians to use the provided job codes and times when filling out warranty forms. The times are based on average conditions and a mechanic's ability. They include preparation, inspection, disassembly/reassembly, and testing times. The document also provides settings and conditions used to calculate the times along with exclusions from warranty coverage.
Kioti daedong dk55 tractor parts catalogue manualjfjkskemem
This document provides instructions and information for a tractor parts list, including:
1. It explains that the parts list is organized into groups and sub-groups with reference numbers, part names, and other identifying information.
2. It notes that the parts list should be used to order correct replacement parts and for repair reference.
3. It indicates that tractor specifications can vary by country, so the correct country specification should be ordered.
This document provides an overview and instructions for operating a KIOTI DK45 or DK50 tractor. It discusses safety precautions for tractor operation, operating the engine and controls, maintenance procedures, and troubleshooting. The manual is intended to help new owners safely and properly use their tractor.
Kioti daedong dk45 sc tractor parts catalogue manualjfjkskemem
This document provides parts list information for various tractor models. It includes 10 sections that provide instructions for using the parts list, a table of contents listing the component groups, and specifications for different country models. The parts list is intended to help correctly identify part numbers when ordering or repairing parts, and is subject to change without notice. Serial numbers and interchangeability are noted for some parts.
Kioti daedong ck25 h tractor parts catalogue manualjfjkskemem
The document provides instructions and specifications for parts lists for various tractor models. It includes 10 numbered instructions describing the parts list codes and identifiers. The parts lists themselves contain extensive lists of component groups, part numbers, descriptions, quantities and other specifications for different tractor models and countries.
Kioti daedong ck20 h tractor service repair manualjfjkskemem
This document contains operation and maintenance instructions for a tractor. It includes sections on safety, identification and dimensions of the tractor, maintenance schedules and checklists, specifications for lubricants and fluids, and troubleshooting guides. Individual chapters cover the engine, clutch, transmission, and other systems. The document provides detailed guidance on inspection, disassembly, repair and reassembly of components.
Kioti daedong ck20 h tractor parts catalogue manualjfjkskemem
This document provides parts information for the cylinder block group of tractors, including the cylinder block assembly, cylinder liner, plugs, pins, gasket, cover, bolt, and joint. It lists the part numbers, descriptions, quantities, and remarks for each part, and indicates that parts should be ordered according to the tractor model and country. The specifications vary slightly for each model and country.
The document provides operating instructions for Fendt tractors models 916, 920, 924, 926, and 930 Vario. It includes sections on starting and stopping the engine, operating the Vario transmission and joystick, engaging the PTO, using the hydraulic system and power lift, hitching a trailer, and vehicle care and maintenance. The manual explains the instrument panel, controls, and safety features and provides guidance on daily operation of the tractor.
Case cx75 sr lr tier 3 crawler excavator operator manualjfjkskemem
This document provides safety instructions and information for operating hydraulic crawler excavators models CX75SR, CX75SR-LR, CX80 and CX135SR. It identifies the main components of the machines and explains how to properly inspect, maintain and service them. The manual also contains specifications and diagrams to familiarize the operator with the machines' controls, instruments, safety features and operating procedures.
- The document is a component repair manual for hydrostatic pumps. It provides parts identification diagrams and procedures for disassembling and assembling hydrostatic pumps.
- The manual instructs technicians to clean work areas, use plugs and caps to prevent dirt entry, and separate parts between pumps during disassembly to avoid mixing components. It also provides torque specifications for reassembly.
Bobcat a300 b skid steer loader parts catalogue manual (sn 5235 11001 & a...jfjkskemem
This document provides a parts list for a main frame and operator cab. It includes 41 line items describing individual parts with references numbers, part numbers, descriptions, remarks, serial numbers if applicable, and quantities. The parts listed are primarily for structural, mechanical, and protective components of the main frame and operator cab.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
2. Shutdown SIS
Previous Screen
Product: MOTOR GRADER
Model: 140M MOTOR GRADER B9M
Configuration: 140M Motor Grader B9M00001-UP (MACHINE)
Disassembly and Assembly
140M Motor Grader
Media Number -KENR6424-07 Publication Date -01/04/2015 Date Updated -06/04/2015
i05508509
Circle - Install
SMCS - 6154-012
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7574 Link Bracket 2
B
1P-1831 Adapter 1
4C-9633 Puller Stud 1
9U-6833 Nut 1
5P-8250 Washer 1
5P-4197 Spacer 1
6V-3160 Double Acting Cylinder 1
350-7768 Electric Hydraulic Pump Gp (115V) 1
350-7769 Electric Hydraulic Pump Gp (230V) 1
C
4C-6486 Stand 1
8S-7621 Tube 1
8S-7615 Pin 1
8S-8048 Saddle 1
1/9140M Motor Grader B9M00001-UP (MACHINE)(SEBP4304 - 75) - Documentation
2020/1/14https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, PERJ1017, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat®
products.
Dispose of all fluids according to local regulations and mandates.
Hydraulic oil pressure can remain in the hydraulic system on this
machine after the engine and pump have been stopped. Serious injury
can result if this pressure is not released before any service is done on
the hydraulic systems. In order to prevent possible injury, release the
hydraulic system pressure before working on any fitting, hose, or
hydraulic component.
Lower all attachments to the ground before service is started. If the
hydraulic system must be serviced, tested, or adjusted with the
attachment in the raised position, the attachments and lift cylinders
must be supported properly.
Always move the machine to a location away from the travel of other
machines. Be sure that other personnel are not near the machine when
the engine is running and tests or adjustments are being made.
When you are using hydraulic cylinders and puller studs, always ensure
that the rated capacity of the puller stud meets or exceeds the rated
capacity of the hydraulic cylinder. If the puller stud does not meet or
exceed the rated capacity of the hydraulic cylinder, a sudden failure of
the puller stud could occur. The sudden failure of the puller stud could
result in personal injury or death.
2/9140M Motor Grader B9M00001-UP (MACHINE)(SEBP4304 - 75) - Documentation
2020/1/14https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. Illustration 1 g01402122
1. Lower the temperature of two bearings (24). Use Tooling (B) in order to install two bearings
(24) (not shown) into blade (1). Repeat this step for the opposite side.
Illustration 2 g01402120
2. Lower the temperature of two bearings (23). Use Tooling (B) in order to install two bearings
(23) (not shown) in circle assembly (10). Repeat this step for the opposite side.
Illustration 3 g01402117
3. Start the machine. Lower drawbar (22) onto circle assembly (10).
3/9140M Motor Grader B9M00001-UP (MACHINE)(SEBP4304 - 75) - Documentation
2020/1/14https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. 4. Move the machine in order to engage the circle drive pinion on circle assembly (10).
Illustration 4 g01402108
5. Stop the engine. Install wear strip (21) and shoe (20).
Note: Note the location of shoe (20). Repeat this step for the remaining shoes.
6. Install bolts (19).
7. Tighten setscrew (18).
8. Tighten nuts (17).
Illustration 5 g01402102
9. Install wear strips (16).
4/9140M Motor Grader B9M00001-UP (MACHINE)(SEBP4304 - 75) - Documentation
2020/1/14https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. 12. Position bracket (13).
13. Install washer (12) and bolt (11).
Illustration 9 g01402057
14. Start the engine. Operate the machine in order to raise circle assembly (10) off the suitable
cribbing and Tooling (C). Remove Tooling (C) from circle assembly (10). Reposition the
machine or the blade.
Illustration 10 g01402047
15. Position shims (5).
Note: Use the required number of shims (5) in order to provide a sliding fit with a
maximum of 1.800 mm (0.0709 inch) clearance between the bracket and the beam.
16. Install shaft assembly (9).
17. Install washer (6), nut (7), and cotter pin (8).
Note: Tighten nut (7) to 0.000 mm (0.0000 inch) clearance and back off one slot.
6/9140M Motor Grader B9M00001-UP (MACHINE)(SEBP4304 - 75) - Documentation
2020/1/14https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. Illustration 11 g01402035
18. Attach Tooling (A) and a suitable lifting device to blade (1). The weight of blade (1) is
approximately 907 kg (2000 lb). Use Tooling (A) and the suitable lifting device in order to
raise blade (1).
Illustration 12 g01402018
19. Connect hose assemblies (3). Install bolts (4).
7/9140M Motor Grader B9M00001-UP (MACHINE)(SEBP4304 - 75) - Documentation
2020/1/14https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. Illustration 13 g01401879
20. Install blade tip cylinder (2). Refer to Disassembly and Assembly, "Blade Tip Cylinder -
Remove and Install".
Illustration 14 g01401875
21. Remove Tooling (A) from blade (1).
Illustration 15 g01402224
8/9140M Motor Grader B9M00001-UP (MACHINE)(SEBP4304 - 75) - Documentation
2020/1/14https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. Illustration 16 g01402378
22. Loosen bolts (19) in order to allow movement in shoes (20). Seat circle drive pinion (25) in
the teeth on circle (10). Move circle (10) in order to obtain Dimension (C). Dimension (C)
must be 50.00 + 2.50 − 0.50 mm (2.000 + 0.098 − 0.020 inch).
23. Loosen nuts (17). Evenly adjust setscrews (18) against shoes (20) in order to bring shoes
(20) in contact with circle (10). Back off setscrews (18) in order to obtain Dimension (B).
Dimension (B) must be no greater than 0.80 mm (0.032 inch).
24. Tighten bolts (19) to a torque of 530 ± 70 N·m (391 ± 52 lb ft). Tighten nuts (17) to a torque
of 200 ± 30 N·m (148 ± 22 lb ft).
25. Measure Dimension (A) between wear strip (16) and circle (10). Dimension (A) must be no
greater than 0.50 mm (0.020 inch). Add or remove shims (15) in order to obtain the correct
dimension.
26. Start the engine and run the engine. Rotate the circle through the entire working range and
check for binding. The circle must rotate freely.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Tue Jan 14 18:42:23 UTC+0800 2020
9/9140M Motor Grader B9M00001-UP (MACHINE)(SEBP4304 - 75) - Documentation
2020/1/14https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. Shutdown SIS
Previous Screen
Product: MOTOR GRADER
Model: 140M MOTOR GRADER B9M
Configuration: 140M Motor Grader B9M00001-UP (MACHINE)
Disassembly and Assembly
140M Motor Grader
Media Number -KENR6424-07 Publication Date -01/04/2015 Date Updated -06/04/2015
i07332155
Drawbar - Remove
SMCS - 6153-011
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
504-9791 Lift Gp (60Hz)(1)
1
OR
504-9793 Lift Gp (50Hz)(2)
1
B 439-3940 Bracket As 1
(1)
High-Voltage (480V) Low-Voltage (240V)
(2)
High-Voltage (400V) Low-Voltage (200V)
Cylinders equipped with lock valves can remain pressurized for very
long periods of time, even with the hoses removed.
Failure to relieve pressure before removing a lock valve or
disassembling a cylinder can result in personal injury or death.
Ensure all pressure is relieved before removing a lock valve or
disassembling a cylinder.
1/6140M Motor Grader B9M00001-UP (MACHINE)(SEBP4304 - 75) - Documentation
2020/1/14https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the
component should be thoroughly cleaned to prevent dirt from entering the internal mechanism.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat®
products.
Dispose of all fluids according to local regulations and mandates.
Personal injury can result from hydraulic oil pressure and hot oil.
Hydraulic oil pressure can remain in the hydraulic system after the
engine has been stopped. Serious injury can be caused if this pressure is
not released before any service is done on the hydraulic system.
Make sure all of the work tools have been lowered to the ground, and
the oil is cool before removing any components or lines. Remove the oil
filler cap only when the engine is stopped, and the filler cap is cool
enough to touch with your bare hand.
Note: Put identification marks on all hoses and on all hose assemblies for installation purposes.
Plug all hose assemblies to prevent fluid loss, and to prevent contaminants from entering the
system.
1. Connect the steering frame lock. Refer to Operation and Maintenance Manual, "Steering
Frame Lock".
2/6140M Motor Grader B9M00001-UP (MACHINE)(SEBP4304 - 75) - Documentation
2020/1/14https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. Illustration 1 g06287257
2. Position drawbar (1) to the left side of the machine. Position the blade onto suitable
cribbing. Support the circle with Tooling (A) as shown. Refer to Tool Operating Manual,
NEHS1303, "Lift Group (Stand - 25 Ton)" for more information on Tooling (A).
3. Stop the engine. Release the system pressure. Refer to Disassembly and Assembly, "System
Pressure - Release".
Illustration 2 g01403317
4. Attach Tooling (B) and a suitable lifting device to swivel (3). The weight of swivel (3) is
approximately 41 kg (90 lb).
5. Disconnect hose assemblies (2), (5), and (6).
6. Remove bolts (7) and lower swivel (3).
7. Remove the suitable lifting device.
8. Remove all clamps (4) that connect hose assemblies (6) to the drawbar.
3/6140M Motor Grader B9M00001-UP (MACHINE)(SEBP4304 - 75) - Documentation
2020/1/14https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. Illustration 3 g01403392
9. Remove centershift cylinder (8). Refer to Disassembly and Assembly, "Centershift Cylinder
- Remove and Install".
10. Remove bolts (10), cap (9), and the shims. Repeat this step for the opposite side of the
machine.
Note: Note the number and the location of the shims.
11. Use the hydraulics to retract the blade lift cylinders.
Note: Secure the blade lift cylinders to the front frame.
Illustration 4 g01403404
12. Loosen nuts (11).
13. Loosen set screws (12).
14. Remove bolts (13).
4/6140M Motor Grader B9M00001-UP (MACHINE)(SEBP4304 - 75) - Documentation
2020/1/14https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
16. 15. Remove shoe (14) and wear strip (15).
Note: Note the location of the shoes.
16. Repeat Steps 12 through 15 for the remaining shoes.
Illustration 5 g01403432
17. Attach a suitable lifting device to drawbar (1).
18. Remove bolts (16).
19. Remove drawbar (1). The weight of drawbar (1) is approximately 907 kg (2000 lb).
Illustration 6 g03485398
20. Remove bolts (22).
21. Remove adapter (17) and shims (18) from drawbar (1).
22. Remove bolts (19) and ball (20). Remove adapter (21) from drawbar (1).
5/6140M Motor Grader B9M00001-UP (MACHINE)(SEBP4304 - 75) - Documentation
2020/1/14https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. 23. If necessary, remove the circle drive. Refer to Disassembly and Assembly, "Circle Drive -
Remove".
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Tue Jan 14 18:43:19 UTC+0800 2020
6/6140M Motor Grader B9M00001-UP (MACHINE)(SEBP4304 - 75) - Documentation
2020/1/14https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. Shutdown SIS
Previous Screen
Product: MOTOR GRADER
Model: 140M MOTOR GRADER B9M
Configuration: 140M Motor Grader B9M00001-UP (MACHINE)
Disassembly and Assembly
140M Motor Grader
Media Number -KENR6424-07 Publication Date -01/04/2015 Date Updated -06/04/2015
i07339896
Drawbar - Install
SMCS - 6153-012
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
504-9791 Lift Gp (60 Hz)(1)
1
OR
504-9793 Lift Gp (50 Hz)(2)
1
B 439-3940 Bracket As 1
(1)
High-Voltage (480V) Low-Voltage (240V)
(2)
High-Voltage (400V) Low-Voltage (200V)
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
1. If necessary, install the circle drive. Refer to Disassembly and Assembly, "Circle Drive -
Install".
1/6140M Motor Grader B9M00001-UP (MACHINE)(SEBP4304 - 75) - Documentation
2020/1/14https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
19. Illustration 1 g03485398
2. Install adapter (21) to drawbar (1). Install ball (20) and bolts (19) to drawbar (1). Tighten
bolts (19) to a torque of 500 ± 65 N·m (369 ± 48 lb ft).
3. Install shims (18) and adapter (17). Adjust shims (18) to obtain an end play of
0.60 ± 0.20 mm (0.024 ± 0.008 inch).
4. Install bolts (22).
Illustration 2 g01403432
5. Attach a suitable lifting device to drawbar (1). Install drawbar (1). The weight of drawbar
(1) is approximately 907 kg (2000 lb).
6. Install bolts (16).
2/6140M Motor Grader B9M00001-UP (MACHINE)(SEBP4304 - 75) - Documentation
2020/1/14https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
20. Illustration 3 g01403404
7. Install shoe (14). Repeat for the remaining shoes.
8. Install bolts (13).
Note: Note the number of shims (15) and the location of shoes (14).
9. Tighten set screw (12).
10. Tighten nut (11).
Illustration 4 g01403392
11. Extend the blade lift cylinders.
12. Install cap (9) and the shims. Install bolts (10). Repeat this step for the opposite side of the
machine.
Note: Note the number of shims.
13. Install centershift cylinder (8). Refer to Disassembly and Assembly, "Centershift Cylinder -
Remove and Install".
3/6140M Motor Grader B9M00001-UP (MACHINE)(SEBP4304 - 75) - Documentation
2020/1/14https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...