Catalogue ENPOS
Công ty TNHH thiết bị kỹ thuật Đà Nẵng
Chuyên cung cấp kích thủy lực enpos, đột thủy lực enpos,....
Liên hệ: 0918.434.694 để đặt hàng và tư vấn một cách tốt nhất.
3. www.enpos21.com / 2
ENPOS KOREA HYDRAULIC CO
THE POWER OF IDEA!
ENPOS
1989.01 Founded KOREA HYDRAULIC CO. (ENPOS)
1991.07 Registered the industrial design on clamp cylinders.
1996.12 Nominated as a superior technology enterprise by KOREA technology Credit Guarantee Fund.
1999.11 Acquired the certificate of ISO 9001 and DNV.
2001.01 Acquired utility model patent for dump system of hydraulic motor pump.
2001.02 Established RAB affiliation.
2002.06 Acquired utility model patent for hyd' pump with variable volume oil tank.
2003.02 Moved head office and factory to present location.
Noksan Industrial Complex, 1591-2 Songjeong-Dong, Gangseo-Gu, Busan
2005.02 Registered the venture business.
2007.06 Selected as a Busan strategic industry - leading company.
2008.11 Acquired the certificate of INNOBIZ.
2009.04 Acquired the certificate of CE byTUV NORD. (Aluminum hand pump)
2013.01 Acquired the certificate of registration for KOREA HYDRO & NUCLEAR POWER CO., LTD.
2013.08 Acquired the certificate of CE. (N2 Filling system)
We have been trying to satisfy out customers with the best quality based on advanced technologies.
Our efforts to improve the quality will be continued to give full satisfactions to the customers on and on.
Companyhistory
Certificates
4. ENPOS THE POWER OF IDEA! www.enpos21.com / enpos@enpos.co.kr / 82-51-832-1100
3 / www.enpos21.com
Company Introduction 2
Contents 3
HYDRAULIC CYLINDERS & JACKS 6-19
Single acting cylinder 6
Double acting cylinder 8
Aluminum cylinder 10
Low profile & Compact cylinder 12
Center hole cylinder 14
Lock nut cylinder 16
Pulling jack 18
Toe jack 19
HYDRAULIC PUMPS 22-29
Hand pump 22
Foot pump 24
Mortor pump 25
Engine pump & Battery pump 28
AC pump 29
HYDTOOLS &ACCESSORIES 32-47
Hydraulic punch 32
Pipe bender & Puller 33
Angle cutter &Wire cutter 34
Nut splitter & Flange spreader 35
Cutting tool 36
Crimping tool 39
Notching machine 45
Accessory 46
HYDRAULIC EQUIPMENTS 50-59
Shop press 50
Block lifter 52
Power pack 54
Jack up System 56
Plunger pump unit 57
Rocky washer 58
Flushing unit 59
Content
20. ENPOS THE POWER OF IDEA! www.enpos21.com / enpos@enpos.co.kr / 82-51-832-1100
TOE JACK EOLJ-SERIES
19 / www.enpos21.com
>CAPACITY: 5-30 ton
>STROKE: 120~160 mm
>Max Pressure: 700 bar
-4 Standard models
-Spring return
Never exceed the
maximum capacity
indicated.
Support the top in the
center and press to
inside edge of the
bottom plate.
Keep the stroke less
than 60mm when
lifting an object
from bottom.
Keep the jack on level
ground in all times.
HOW TO USETHE TOE JACK
Model
Cyl. Capacity (ton) Stroke
(mm)
Dimension (mm) Weight
(kg)UP DOWN A B C D
EOLJ-52.5 5 2.5 120 243 363 170×230 19 11
EOLJ-105 10 5 150 290 440 188×260 22 19.1
EOLJ-2010 20 10 160 327 487 242×280 28 33.6
EOLJ-3015 30 15 160 347 507 273×308 32 51.2
HYDRAULIC CYLINDERS & JACKS
-ENPOS toe jacks are used for variety industries.
23. 700bar HAND PUMP EJP(EPA)-SERIES
www.enpos21.com / 22
ENPOS KOREA HYDRAULIC CO
Model
Oil capacity
(cc)
Operating
pressure (bar)
Put Flow (cc) Piston dia (mm) Weight (kg)
(except hose & fitting)
Low High Low High Low High
EJP-1B 800 20 700 13 2.3 28.5 12 7
EJP-2A 2000 20 700 13 2.3 28.5 12 11.5
EJP-3A 3000 20 700 13 2.3 28.5 12 12.5
EJP-3B 10000 30 700 90 15 60 14 26
※EPA-702S 800 20 700 17 3.1 30 12 4
EHJP-1B 800 20 1500 13 1 28 8 7
EHJP-2A 2000 20 1500 13 1 28 8 11.5
EHJP-2C 2000 130 2800 0.5 11.7 28 5.5 6
※EPA model is anodized aluminum pump reservoir and body.
24. ENPOS THE POWER OF IDEA! www.enpos21.com / enpos@enpos.co.kr / 82-51-832-1100
HIGH PRESSURE HAND PUMP EHJP-SERIES
23 / www.enpos21.com
>CAPACITY: 800-10000cc
>Max Operating Pressure: 700 bar
>1.8m Hydrulic hose with couplers
-Can be used for double acting cylinder with manual valve.
-EHPA model is for high pressure up to 1500~2800bar.
-Large oil capacity to power a wide range of cylinders or tools.
ESRA SERIES with EPA-702S is
perfect choice for you!
Lightweight, easy to carry and positioning!
At half the weight of steel cylinders of
comparable capacity!
Ultra light weight and compact design for
easy portability!
Dimension (mm)
Model
A B C D E F G H I
470 400 140 161 625 EJP-1B
560 500 135 162 650 EJP-2A
586 506 140 180 670 EJP-3A
250 270 700 190 EJP-3B
500 400 110 160 600 EPA-702S
530 440 110 170 650 EHJP-1B
414 510 140 143 624 EHJP-2A
570 454 100 142 653 EHJP-2C
HYDRAULIC PUMPS
25. FOOT EFP-SERIES
www.enpos21.com / 24
ENPOS KOREA HYDRAULIC CO
Model
Oil capacity
(cc)
Operating
Pressure (bar)
Put Flow (l/min) Dimension (mm)
Weight
(kg)
Low High Low High A B C D
EFP-15 1500 20 700 2.2 0.9 265 125 130 110 7.3
EFP-20 2000 20 700 2.2 0.9 275 130 158 115 9.5
EFP-25 2500 20 700 2.2 0.9 275 120 167 110 12.5
-Can be used by oil pressure 700bar operating by air 7bar.
-Air oil pump is that can use conveniently by single acting or
double acting ram.
>Specification
ENPOS KOREA
26. ENPOS THE POWER OF IDEA! www.enpos21.com / enpos@enpos.co.kr / 82-51-832-1100
1/3HP MOTOR PUMP KUP-35-SERIES
25 / www.enpos21.com
Model
Flow Rate (l/min) Pressure Rating (bar) Reservoir
Capacity (liter)
Weight (kg)
Low High Low High
KUP-35RH 2 0.2 10 700
0.8 7.5
1.6(L) 8.5(L)
Model Function Weight (kg)
KUP-35RH-NC(L)
Pressure hold type. Cylinder can be stopped on forward action. Cylinder cannot be
stopped on retraction.
7.5
KUP-35RH-NO(L)
While on switch is pressed, pump is running. With optionally incorporated pressure
switch, cylinder can be stopped at set pressure and cylinder returns automatically.
7.5
KUP-35RH-IN(L) Cylinder can be stopped both on forward action and retraction. 7.5
-Light weight, Compact design for easy portability.
-The most ideal product to prevent any injury which can be occurred by using hand pump.
-Enable to maximize the efficiency of work.
-Various models can be used with the most of hydraulic tools.
-Can be used anywhere and under any condition with oil-tight tank.
-Enable to be used for Hydraulic cylinder, Puncher, Puller, Bender, Cutter, and Hydraulic Press.
-220V Single phase is standard.
-Can be used for every electric tools.
>Motor Power: 1/3 HP
>Max Operating Pressure: 700bar
>Voltage: 220V 1ph 50/60Hz
>Reservoir Capacity: 0.8-1.6 liters
>Specification
>Features and function of each model
HYDRAULIC PUMPS
-Drawings- -KUP-35RH-NC(L)- -KUP-35RH-NO(L)- -KUP-35RH-IN(L)-
27. 1/2HP MOTOR PUMP KUP-45-SERIES
www.enpos21.com / 26
ENPOS KOREA HYDRAULIC CO
Model
Flow Rate (l/min) Pressure Rating (bar) Reservoir
Capacity (liter)
Weight (kg)
Low High Low High
KUP-45SVG(L) 2.5 0.35 70 700
2 18
4(L) 20(L)
Model Function Weight (kg)
Single Acting KUP-45SVG-4(L)
A singled-acting cylinder is actuated by solenoid valve. "Advance" with ON switch de-
pressed and the motor running. "Retract" with the switch released and the motor stops.
17.2
Double Acting
KUP-45SVG-7(L) A double-acting cylinder is actuated by 4 way manual valve. 16.1
KUP-45SVG-8H(L)
A double-acting cylinder is actuated by solenoid valve. The cyliner can not be stopped,
and pressure can not be hold.
18.5
KUP-45SVG-
8WP(L)
A double-acting cylinder is actuated by solenoid valve. Advance/ "A" port Hold/Retract
with stacking type pilot-operated check valve fitted on "A" port line. It allows pressure
holding on both "A" and "B" port lines.
19
>Specification
>Features and function of each model
>Motor Power: 1/2 HP
>Max Operating Pressure: 700bar
>Voltage: 220V 1ph 50/60Hz
>Reservoir Capacity: 2-4 liters
-Light weight, easy to carry for maximum portability.
-Enable to maximize the efficiency of work.
-Can be applied to load of around 100ton.
-Enable to be used for Hydraulic tools.
Drawings KUP-45SVG KUP-45SVG-8H(L)
KUP-45SVG-4(L) KUP-45SVG-7(L)
KUP-45SVG-8WP(L)
28. ENPOS THE POWER OF IDEA! www.enpos21.com / enpos@enpos.co.kr / 82-51-832-1100
1-5HP MOTOR PUMP KUPS-SERIES
27 / www.enpos21.com
Model Power
Flow Rate (l/min) Pressure Rating (bar)
Power (liter) Weight (kg)
Low High Low High
kup-753 1HP 4.5 0.6 70 700 10 50
kup-1503 2HP 13 1.05 70 700 15 85
kup-2203 3HP 13 1.7 70 700 15 85
kup-3503 5HP 9 3 70 700 10 68
Model Function
Single Acting KUP-HG-4(L)
A singled-acting cylinder is actuated by solenoid valve. "Advance" with ON switch depressed and the
motor running. "Retract" with the switch released and the motor stops.
Double Acting
KUP-HG-7(L) A double-acting cylinder is actuated by 4 way manual valve.
KUP-HG-8H(L)
A double-acting cylinder is actuated by solenoid valve. The cyliner can not be stopped, and pressure
can not be hold.
KUP-HG-8WP(L)
A double-acting cylinder is actuated by solenoid valve. Advance/ "A" port Hold/ Retract with stacking
type pilot-operated check valve fitted on "A" port line. It allows pressure holding on both "A" and "B"
port lines.
>Specification
>Features and function of each model
>Motor Power: 1, 2 , 3, 5 HP
>Max Operating Pressure: 700bar
>Voltage: 220V 3ph 50/60Hz
>Reservoir Capacity: 4-10 liters
-Can be used for industrial purpose.
-Various models can be used with the most of hydraulic tools.
-Quite smooth operation (80dB)
-We guarantee the best quality.
HYDRAULIC PUMPS
Drawings KUP-_HG KUP-_HG-8H(L)
KUP-_HG-4(L) KUP-_HG-7(L)
KUP-_HG-8WP(L)
29. ENGINE PUMP & BATTERY PUMP KEP & KDPM-SERIES
www.enpos21.com / 28
ENPOS KOREA HYDRAULIC CO
KEP5 SERIES KEP2 SERIES
Type Air Cooled 4 Cycle Gasoline Engine Air Cooled 4 Cycle Gasoline Engine
Fuel tank capacity 3.2 L 0.5 L
Fuel Automobile Gasoline (Unleaded) Automobile Gasoline (Unleaded)
Cylinder volume 169 cc 86 cc
Continuous output 4.0 ps / 1,800 rpm 2 HP / 3,600 rpm
Max output 5.7 ps / 2,000 rpm 3 HP / 4,200 rpm
Spark plug NGK BR6HS NGK BMR 4A
Direction of rotation
Counterclockwise, as Viewed from P.T.O.
Shaft side
Counterclockwise, as Viewed
from P.T.O. Shaft side
Engine oil SC Higher Garde or 10W-30 0.6L SC Higher Garde or 10W-30 0.6L
>Specification
>Specification
>Engine Specification
HYDRAULIC ENGINE PUMP
BETTERY OPERATED DC PUMP
Model Type
Pressure(bar) Flow rate (l/min) Dimension (mm)
Require oil (L)
Reservoir
capacity (L)
Weight (kg)
Low High Low High L W H
KEP5-2S Manual-DoubleSolenoid 70 700 4.3 1.37 700 440 565 9 11 60
KEP5-M Manual 70 700 4.3 1.37 700 440 565 9 11 58
KEP2-M Manual 70 700 4.3 1.37 500 330 450 6.5 8 32
Model Type
Working
Pressure
Flow rate (l/min) Voltage
(V)
Weight
(kg)Low High
KDPM1/3-S SOL 700 0.2 1.4
18V 4.0Ah
(1ea)
8.6
30. ENPOS THE POWER OF IDEA! www.enpos21.com / enpos@enpos.co.kr / 82-51-832-1100
AC PUMP KMPB-SERIES
29 / www.enpos21.com
>Specification
-Extra option in cooler (3kg)
-The availability with the hydraulic punch and torque wrench pump.
-Enable to maximize the efficiency of work.
HYDRAULICAC PUMP (220V SINGLE)
Model Type
Working Pressure(bar) Flow rate (l/min)
Voltage
Motor
(Kw)
Required oil
(L)
Weight (kg)
Low High Low High
KMPB1/2-M manual v/v
70 700 2.58 0.43
220V
50/60Hz
1.1 7 24.8KMPB1/2-S single_sol v/v
KMPB1/2-2S double_sol v/v
KMPB1-M manual v/v
70 700 4.3 0.73
220V
50/60Hz
1.35 7 28.4KMPB1-S single_sol v/v
KMPB1-2S double_sol v/v
KMPB2-M manual v/v
70 700 4.3 1.32
220V
50/60Hz
2.7 23 54.3
KMPB2-2S double_sol v/v
HYDRAULIC PUMPS
ENPOS KOREA
33. HYDRAULIC PUNCH EHPU-SERIES
www.enpos21.com / 32
ENPOS KOREA HYDRAULIC CO
Model Cylinder Capacity
Max Punching
Hole Size
Max Punching
Thickness
Max Center
Depth
Weight (kg)
EHPU-2010-S 23 ton Ø 20.5 mm 10 mm 60 mm 13 kg
EHPU-2010-D 23 ton Ø 20 mm 10 mm 60 mm 10 kg
EHPU-2412 30 ton Ø 24 mm 12 mm 60 mm 15 kg
EHPU-2416-65 45 ton Ø 24 mm 16 mm 65 mm 21 kg
EHPU-2416-110 45 ton Ø 24 mm 16 mm 110 mm 28 kg
EHPU-2420 65 ton Ø 24 mm 20 mm 110 mm 37 kg
EHPU-3120 75 ton Ø 31 mm 20 mm 110 mm 75 kg
>Capacity: 23-75ton
>Hole Size: 8-31mm
-Max Operating Pressure: 700bar
-Max PunchingThickness: 20mm
-Max Punching Hole Size: 31Ø
-7 standard models / Enadle to maxmize the efficiecy of work
-Each punch includes 4set of puncher & die.
-All standard is double acting, but 'EHPU-2010-S' is single acting type.
-Most popular model is 'EHPU-3120 with KUP-2203HG-8H'.
-We guarantee the best capability for work.
EHPU-2010-S
EHPU-2010-D
EHPU-2412
EHPU-2416-65
EHPU-2416-110
EHPU-2420
EHPU-3120
An application for aluminium angle punching with 26 sets of EHPU-2416
Applicable Products
P.27
34. ENPOS THE POWER OF IDEA! www.enpos21.com / enpos@enpos.co.kr / 82-51-832-1100
PIPE BENDER EPB / PULLER EHP-SERIES
33 / www.enpos21.com
Model
Cylinder
Capacity
Max bending Thickness Dimension Shoes Weight (kg)
EPB-2 10 ton 3.8 mm 750×700×250 mm 15~50A 13 KG
EPB-3 15 ton 4.5 mm 850×1050×300 mm 20~80A 27 KG
EPB-4 20 ton 4.9 mm 1150×1300×300 mm 32~100A 35 KG
Model
Cylinder
Capacity
Max Reach Max Spread
Cylinder
Stroke
Weight (kg)
EHP-10 10 ton 180 mm 240 mm 150 mm 13.5
EHP-20 20 ton 280 mm 400 mm 150 mm 36.8
EHP-30 30ton 280 mm 420 mm 150 mm 46.7
EHP-50 50 ton 360 mm 520 mm 150 mm 85.3
"One Shot" and "Sweep" One shot shoes
give up to 90' bend without resetting.
Sweep shoes are used where increasing
radii are required for multiple parallel
pipe installations.
>Capacity: 10-50 ton
>Spread Range: 240-520mm
>Max Pressure: 700bar
>Max Bending Size: 4" (100A)
>Max BendingThickness: 4.9mm
>Max Pressure: 700bar
-Make SmoothWrinkle free bends
-Coupler port G 3/8
HYDTOOLS &ACCESSORIES
Applicable Products
P.25 P.22
Applicable Products
P.25 P.22
35. ANGLE &WIRE CUTTER EAC & EWC-SERIES
www.enpos21.com / 34
ENPOS KOREA HYDRAULIC CO
Model Cylinder Capacity Max angle size Suitable pump Weight (kg)
EAC-75 30 ton 75×75×10T KUP-45SVG-8H 25 kg
EAC-100 50 ton 100×100×13T KUP-1503HG-8H 55 kg
EAC-150 90 ton 150×150×13T KUP-1503HG-8H 150 kg
Model
Cylinder
Capacity
Stroke Maxanglesize
Suitable
pump
Weight (kg)
EWC-32-N 20 ton 40 mm Ø 32
EJP-1B or
KUP-35RH
8.8 kg
Model
Cylinder
Capacity
Stroke Maxanglesize
Including
parts
Weight (kg)
EBCW-16 12.2 ton 16 mm Ø 16
battery 1ea
blade 2ea
7.3 kg
>MaxAngle Size: 150*150*13T
>MaxWorking Power: 90 ton
>MaxWorking Pressure: 700bar
-3 Stnadard models / Coupler port PT 3/8
-For cutting steel angle
-Cutting side is very clean, so no need additional touches.
-Better performance & less noise and dust than manual cutter
>Max Cutting Size: Ø 32 mm
-MaxWorking Pressure: 700bar
>Max Cutting Size: Ø 16 mm
WIRE CUTTER for steel wire (max: Ø 32)
Battery operated cutter for steel wire, steel bar,
reinforcing rod,Al/Cu ba
- EAC-100 with KUP-1503HG-8H
36. ENPOS THE POWER OF IDEA! www.enpos21.com / enpos@enpos.co.kr / 82-51-832-1100
NUT SPLITTER & FLANGE SPREADER ENS & EFS-SERIES
35 / www.enpos21.com
Model EFS-661
Capacity 14 ton
Max spread 61mm
Tip clearance 6mm
Weight 7.1 kg
pump
EJP-1B or
KUP-35RH
Model EFS-949
Capacity 14 ton
Max spread 94mm
Tip clearance 9mm
Weight 2.0 kg
pump
EJP-1B or
KUP-35RH
>Capacity: 14 ton & 32.5 ton
>Bolt range: 14 ton (M12-M24) / 32.5 ton (M20-M33)
-MaxWorking pressure: 700bar / Coupler port PT 3/8
-MaxWorking pressure: 700bar / Coupler port PT 3/8
HYDRAULIC SPLITERS!
HYDRAULIC FLANGE SPREADER!
For flange spreading & gasket exchange
Model Capacity Stroke OilCapacity
Dimension (mm)
Suitable pump Weight
A B C D E F G
ENS-1415 14 ton 15 mm 31.8 cc 15-45 12.5 73 221 23 62.5 78 EJP-1B or
KUP-35RH
5.2 kg
ENS-32.520 32.5 ton 20 mm 93 cc 39-62 19 98 278 29 85 115 12 kg
HYDTOOLS &ACCESSORIES
37. CUTTINGTOOL EBCC-SERIES
www.enpos21.com / 36
ENPOS KOREA HYDRAULIC CO
Battery Operated CuttingTools
EBCC16 EBCC32 EBCC40/EBCC55B EBCC55 EBCC85
Material EBCC16 EBCC32 EBCC40 EBCC55B EBCC55 EBCC85
JIS 1 Wire rope , 6 x 7 16 22 25
JIS 2 Wire rope , 6 x 12 16 25 30
JIS 3 Wire rope , 6 x 19 16 25 30
Soft copper rod 22 35
Aluminum bar 20 28
Soft steel bar,
Under SS400
20 22
Reinforcing rod 16 20
Cu strands 41.6(1,000mm2) 41.6(1,000mm2)
Al strands 40.7(980mm2) 46.2(1,260mm2)
ACSR 38.4(810mm2) 46.2(1,260mm2)
JIS 1 Guy wire , 1x7 15 15
JIS 2 Guy wire , 1x19 20 20
CCP cable 16 32 40 55 55 85
Lead cable 16 32 40 55 55 85
Underground cable 16 32 40 55 55 85
Capacity (ton) 2.4 2.4 8 10 7.5 7.5
Size (mm) 425x120x75 425x120x75 450x370x80 450x380x80 440x370x80 520x400x80
Weight (kg) 2.3 2.3 4.7 7 5 5.6
Standard parts
Battery 18V(2.0Ah)-1EA
Charger - 1EA
Battery 18V(4.0Ah)-1EA Charger - 1EA
-Battery: 18V 2.0Ah Lithium-ion 369g / 18V 4.0Ah Lithium-ion 612g
-Charger: 110/220V 50/60Hz
mm
38. ENPOS THE POWER OF IDEA! www.enpos21.com / enpos@enpos.co.kr / 82-51-832-1100
CUTTING ECC-N-SERIES
37 / www.enpos21.com
Hydraulic Cutter Headtools (without pump)
ECC40-N
ECC85-N
ECC55B-N
ECC100-N
ECC55-N
ECC132-N
ECC85B-N
ECC180-N
Material ECC 40-N ECC 55B-N ECC 55-N ECC 85B-N ECC 85-N ECC 100-N ECC 132-N ECC 180-N
JIS 1 Wire rope , 6 x 7 22 25
JIS 2 Wire rope , 6 x 12 25 30
JIS 3 Wire rope , 6 x 19 25 30
Soft copper rod 22 35
Aluminum bar 20 28
Soft steel bar , Under SS400 20 22
Reinforcing rod 16 20
Cu strands
41.6
(1,000mm2)
41.6
(1,000mm2)
28.8
(500mm2)
41.6
(1,000mm2)
41.6
(1,000mm2)
41.6
(1,000mm2)
Al strands
40.7
(980mm2)
46.2
(1,260mm2)
29.4
(510mm2)
46.2
(1,260mm2)
46.2
(1,260mm2)
46.2
(1,260mm2)
ACSR
38.4
(810mm2)
46.2
(1,160mm2)
Exclusion
JIS 1 Guy wire , 1x7 15 15 93.6
JIS 2 Guy wire , 1x19 20 20 Exclusion
CCP cable 40 55 55 85 85 100 132 175
Lead cable 40 55 55 85 85 100 132 175
Underground cable 40 55 55 85 85 100 132 175
Capacity (ton) 8TON 10 7.5 5 7.5 8 8 27
Size (mm)
330
X96X58
394
X110X68
370
X140X42
410
X140X69
400
X194X88
470
X152X76
550
X185X76
958
X300X127
Weight (kg) 3.7 5.8 4.2 5 4.8 7.2 13 68
mm
HYDTOOLS &ACCESSORIES
39. CUTTINGTOOL ECC-SERIES
www.enpos21.com / 38
ENPOS KOREA HYDRAULIC CO
Hydraulic Hand CuttingTools (with pump)
ECC24
ECC55C
ECC40
ECC85B
ECC55B
ECC85C
Material ECC24 ECC40 ECC55B ECC55C ECC85B ECC85C
JIS 2 Wire rope , 6 x 12 24 25 30
JIS 3 Wire rope , 6 x 19 24 25 30
Soft copper rod 22 22 35
Aluminum bar 20 20 28
Soft steel bar,
Under SS400
20 20 22
Reinforcing rod 16 16 20
Cu strands 24 (325mm2)
41.6
(1,000mm2)
41.6
(1,000mm2)
28.8
(500mm2)
Al strands 24 (325mm2)
40.7
(980mm2)
46.2
(1,260mm2)
29.4
(510mm2)
ACSR 24 (290mm2)
38.4
(810mm2)
46.2
(1,160mm2)
JIS 1 Guy wire , 1x7 15 15 15
JIS 2 Guy wire , 1x19 20 20 20
CCP cable 24 40 55 55 85 85
Lead cable 24 40 55 55 85 85
Underground cable 24 40 55 55 85 85
Capacity (ton) 8 8 10 7.5 5 7.5
Size (mm) 500X150X48 590X150X48 658X117X68 650X190X60 678X140X69 680X220X69
Weight (kg) 4.4 5.8 8 6.2 7.2 7
mm
40. ENPOS THE POWER OF IDEA! www.enpos21.com / enpos@enpos.co.kr / 82-51-832-1100
CRIMPINGTOOL ECT-SERIES
39 / www.enpos21.com
Hydraulic Hand CRimpingTools (with pump)
CrimpingTools Dies(400 SERIES)
ECT240
Capacity 6 ton Stroke 14mm
Size 74X480 mm
Weight 3.1 kg
A range of
application
IEC 16-240mm2 (16, 25, 35, 50, 70, 95, 120, 150, 185, 240)
AIR(1/2) & GAS (5/16)
Hose crimping, Octagon dies
ECT400-32
Capacity 12.2 ton Stroke 32mm
Size 75X546 mm
Weight 5.8 kg
A range of
application
JIS 14-325mm2 (14, 22, 38, 60, 80, 100, 150, 200, 250, 325)
IEC 16-400mm2 (16, 25, 35, 50, 70, 95, 120, 150, 185, 240, 300, 400)
ACSR 32-160mm2, Terminal crimp 8-150mm2, Indent type
IEC16-300mm2 (16, 25, 35, 50, 70, 95, 120, 150, 185, 240, 300), Tap-off connector T20-T362
ECT400-20
Capacity 12.2 ton Stroke 20mm
Size 80X510 mm
Weight 5.1 kg
A range of
application
JIS 14-325mm2 (14, 22, 38, 60, 80, 100, 150, 200, 250, 325)
IEC 16-400mm2 (16, 25, 35, 50, 70, 95, 120, 150, 185, 240, 300, 400)
ACSR 32-160mm2, Terminal crimp 8-150mm2, Indent type
IEC16-185mm2 (16, 25, 35, 50, 70, 95, 120, 150, 185), Tap-off connector T20-T362
-Standard Dies 12set -AIR(1/2")AS(5/16"),(16,25,35,50,70,95,120,150,185,240)
-Standard Dies 12set -16,25,35,50,70,95,120,150,185,240,300,400
-Standard Dies 12set -16,25,35,50,70,95,120,150,185,240,300,400
DIE no. A B C
10 28.3 2.72 10
16 32 3.19 10
25 38.5 3.85 10
35 42.2 4.42 10
50 46.8 4.98 13
70 13.9 6 13
95 16.2 7 13
DIE no. A B C
120 17.8 7.7 13
150 19.6 8.5 13
185 21.9 9.5 13
240 26.33 11.4 13
300 28.32 12.2 13
400 32 14 13
HYDTOOLS &ACCESSORIES
41. CRIMPINGTOOL EBCP-SERIES
www.enpos21.com / 40
ENPOS KOREA HYDRAULIC CO
Battery Operated Crimpingtools
EBCP630-40
Capacity 12.2 ton Stroke 42mm
Size 446X332X80 mm
Weight 7.8 kg
A range of
application
JIS 14-325mm2 (14, 22, 38, 60, 80, 100, 150, 200, 250, 325)
IEC 16-630mm2 (16, 25, 35, 50, 70, 95, 120, 150, 185, 240, 300, 400, 500, 630)
ACSR 32-160mm2, Terminal crimp 8-150mm2, Indent type
IEC16-300mm2 (16, 25, 35, 50, 70, 95, 120, 150, 185, 240, 300), Tap-off connector T20-T362
EBCP400-32
Capacity 12.2 ton Stroke 32mm
Size 425X314X80 mm
Weight 5.95 kg
A range of
application
JIS 14-325mm2 (14, 22, 38, 60, 80, 100, 150, 200, 250, 325)
IEC 16-400mm2 (16, 25, 35, 50, 70, 95, 120, 150, 185, 240, 300, 400)
ACSR 32-160mm2, Terminal crimp 8-150mm2, Indent type
IEC16-300mm2 (16, 25, 35, 50, 70, 95, 120, 150, 185, 240, 300), Tap-off connector T20-T362
EBCP400-40
Capacity 12.2 ton Stroke 42mm
Size 434X314X80 mm
Weight 6.6 kg
A range of
application
JIS 14-325mm2 (14, 22, 38, 60, 80, 100, 150, 200, 250, 325)
IEC 16-400mm2 (16, 25, 35, 50, 70, 95, 120, 150, 185, 240, 300, 400)
ACSR 32-160mm2, Terminal crimp 8-150mm2, Indent type
IEC16-300mm2 (16, 25, 35, 50, 70, 95, 120, 150, 185, 240, 300), Tap-off connector T20-T362
EBCP300G
Capacity 5.3 ton Stroke 30mm
Size 440X335X80 mm
Weight 5.3 kg
A range of
application
IEC 16-300mm2 (16, 25, 35, 50, 70, 95, 120, 150, 185, 240, 300)
Andersone type connector (Desless)
EBCP400-20
Capacity 12.2 ton Stroke 20mm
Size 380X320X80 mm
Weight 4.9 kg
A range of
application
JIS 14-325mm2 (14, 22, 38, 60, 80, 100, 150, 200, 250, 325)
IEC 16-400mm2 (16, 25, 35, 50, 70, 95, 120, 150, 185, 240, 300, 400)
ACSR 32-160mm2, Terminal crimp 8-150mm2, Indent type
IEC16-185mm2 (16, 25, 35, 50, 70, 95, 120, 150, 185), Tap-off connector T20-T362
-Standard parts / Battery : 18vLithium-ion battery/4Ah , Dies-500,630 , Round dies
-Standard parts / Battery : 18vLithium-ion battery/4Ah , Dies -150,185,240,300,400
-Standard parts / Battery : 18vLithium-ion battery/4Ah , Dies 5set-150,185,240,300,400
-Standard parts / Battery : 18vLithium-ion battery/4Ah , Dieless
-Standard parts / Battery : 18vLithium-ion battery/4Ah , Dies 5set-150,185,240,300,400
42. ENPOS THE POWER OF IDEA! www.enpos21.com / enpos@enpos.co.kr / 82-51-832-1100
CRIMPINGTOOL EBCP-SERIES
41 / www.enpos21.com
Battery Operated Crimpingtools
EBCP300
Capacity 8 ton Stroke 20mm
Size 120X475X85 mm
Weight 4.0 kg
A range of
application
JIS 14-250mm2 (14, 22, 38, 60, 80, 100, 150, 200, 250)
IEC 16-300mm2 (16, 25, 35, 50, 70, 95, 120, 150, 185, 240, 300)
ACSR 32-120mm2, Terminal crimp 8-120mm2, Indent type
IEC16-185mm2 (16, 25, 35, 50, 70, 95, 120, 150, 185), Tap-off connector T20-T288
EBCP240
Capacity 6 ton Stroke 14mm
Size 120X425X75 mm
Weight 1.95 kg
A range of
application
IEC 16-240mm2
AIR (1/2) & GAS (5/16)
Hose crimping, Octagon dies
EBCP185
Capacity 8 ton Stroke 20mm
Size 120X475X85 mm
Weight 4.0 kg
A range of
application
Indent type: 16-50, 70-185 2 types
IEC 16-185 mm2 (16, 25, 35, 50, 70, 95, 120, 150, 185)
EBCP25
Capacity 1.5 ton Stroke 5mm
Size 120X390X85 mm
Weight 1.65 kg
A range of
application
Non-Insulated Solderless Terminals, 1.5-25SQ
EBKOP-2(for knock-out punching)
Capacity 8 ton Stroke 25mm
Size 120X480X85 mm
Weight 4.7 kg
A range of
application
B16(1/2)", B22(3/4)", B28(1)", B36(1_3/4)", B42(1_1/2)", B54(2)"
Punching
Thickness
3.2 (under SS400), 1.6 (under SUS)
-Standard parts / Battery : 18vLithium-ion battery/4Ah , Dies 5set-120,150,185,240,300
- Standard parts / Battery : 18vLithium-ion battery / 4Ah , Dies 12set-16, 25, 35, 50, 70, 95, 120, 150, 185, 240
-Standard parts / Battery : 18vLithium-ion battery/4Ah , Indent "M"type2 set-16~50,70~185, "F"type2 set-16~50,70~185
-Standard parts / Battery : 18vLithium-ion battery/4Ah ,Indent Die 2set-1.5,2.5,6,10/16,25, Hex dies 1set - 10,16,25
-Standard parts / Battery : 18vLithium-ion battery/4Ah , EBKOP-2(B16~B54)-6SET
Excluded battery weight!
HYDTOOLS &ACCESSORIES
43. CRIMPINGTOOL ECT-N-SERIES
www.enpos21.com / 42
ENPOS KOREA HYDRAULIC CO
Hydraulic CRimpingTools (without pump)
ECT240-N
Capacity 6 ton Stroke 14mm
Size 74X190mm
Weight 1.5 kg
A range of
application
IEC 16-240mm2 (16, 25, 35, 50, 70, 95, 120, 150, 185, 240)
AIR (1/2) & GAS (5/16)
Hose crimping, Octagon dies
Using pump EJP-1B or KUP-35RH or KUP-45SVG
ECT400-32-N
Capacity 12.2 ton Stroke 32mm
Size 75X300mm
Weight 4.0 kg
A range of
application
JIS 14-325mm2 (14, 22, 38, 60, 80, 100, 150, 200, 250, 325)
IEC 16-400mm2 (16, 25, 35, 50, 70, 95, 120, 150, 185, 240, 300, 400)
ACSR 32-160mm2, Terminal crimp 8-150mm2
Indent type, IEC16-300mm2 (16, 25, 35, 50, 70, 95, 120, 150, 185, 240, 300)
Tap-off connector T20-T365
Using pump EJP-1B or KUP-35RH or KUP-45SVG
ECT400-20-N
Capacity 12.2 ton Stroke 20mm
Size 80X260mm
Weight 3.54 kg
A range of
application
JIS 14-325mm2 (14, 22, 38, 60, 80, 100, 150, 200, 250, 325)
IEC 16-400mm2 (16, 25, 35, 50, 70, 95, 120, 150, 185, 240, 300, 400)
ACSR 32-160mm2, Terminal crimp 8-150mm2
Indent type, IEC16-185mm2 (16, 25, 35, 50, 70, 95, 120, 150, 185)
Tap-off connector T20-T365
Using pump EJP-1B or KUP-35RH or KUP-45SVG
-Standard Dies 12set -AIR(1/2"),GAS(5/16"),(16,25,35,50,70,95,120,150,185,240) / MAX Pressure : 500Bar
-Standard Dies 12set -16,25,35,50,70,95,120,150,185,240,300,400
-Standard Dies 12set -16,25,35,50,70,95,120,150,185,240,300,400
44. ENPOS THE POWER OF IDEA! www.enpos21.com / enpos@enpos.co.kr / 82-51-832-1100
CRIMPINGTOOL ETCT-N-SERIES
43 / www.enpos21.com
Hydraulic CRimpingTools (without pump)
MODEL ETCT630-N ETCT800-N ETCT1000-N
Capacity 25Ton 35Ton 45Ton
Stroke 29mm 35mm 30mm
Size 249mm 269mm 274mm
Weight 5 kg (exclude dies) 7.5 kg (exclude dies) 9 kg (exclude dies)
A range of application
Copper hexagon
300-630mm2 400-800mm2 500-1000mm2
Using pump EPA-1B or KUP-35RH or KUP-45SVG
Standard Dies 300, 400, 500, 630 400, 500, 630, 800 500, 630, 800, 1000
DIE NO. A B MODEL C MODEL C MODEL C
300 28.3 12.2 ETCT-630-N
400 32 14 ETCT-631-N 27 ETCT-800-N 28
500 38.5 16 ETCT-632-N 27 ETCT-801-N 28 ETCT-1000-N 30
630 42.2 17.5 ETCT-633-N 27 ETCT-802-N 28 ETCT-1001-N 30
800 46.8 19.8 ETCT-803-N 28 ETCT-1002-N 30
1000 13.9 6 ETCT-1003-N 30
CrimpingTools Dies
ETCT630-N ETCT800-N ETCT1000-N
HYDTOOLS &ACCESSORIES
45. CRIMPINGTOOL ETCT-SERIES
www.enpos21.com / 44
ENPOS KOREA HYDRAULIC CO
Hydraulic CRimpingTools (without pump)
ETCT100
Capacity 100 ton Stroke 30mm
Size 175(Dia)x362(H)mm
Weight 28 kg
A range of
application
Maximum length inside dies
Steel : 32mm , AL : 52mm , Copper : 64mm
Using pump KUP-753,1503,2203,3503
ETCT150
Capacity 150 ton Stroke 45mm
Size 208(Dia)x481(H)mm
Weight 53 kg
A range of
application
Maximum length inside dies
Steel : 40mm , AL : 86mm , Copper : 86mm
Using pump KUP-753,1503,2203,3503
ETCT200
Capacity 200 ton Stroke 45mm
Size 240(Dia)x500(H)mm
Weight 86 kg
A range of
application
Maximum length inside dies
Steel : 42mm , AL : 95mm , Copper : 95mm
Using pump KUP-753,1503,2203,3503
-Order based Dies
-Order based Dies
-Order based Dies
46. ENPOS THE POWER OF IDEA! www.enpos21.com / enpos@enpos.co.kr / 82-51-832-1100
NOTCHING MACHINE ENM-SERIES
45 / www.enpos21.com
Angle Notching Machine is…
possible to perform 3 kinds of works,notching, bending,
and punching in one unit.
-Easy to use for working with 'the angle square flange mold'.
-Can produce high quality goods by notching, bending, and
punching in precise measurements.
-Can increase productivity by reducing welding area.
-Because of clean bending face, you can bend at perfect right
angles.
-Having wheels on the bottom.
Model Max Angle size (mm) Punching dia (mm)
Max Punching hole
(mm)
Suitable pump Function
ENM-100 100×100×13T 18, 20, 22, 24 10T×28 KUP-1503HG
Notching
Bending
Punching
ENM-150 150×150×12T - - KUP-1503HG Notching
Notching Punching Bending
HYDTOOLS &ACCESSORIES
47. ACCESSORY
www.enpos21.com / 46
ENPOS KOREA HYDRAULIC CO
ITEM MODEL NO. DESCRIPTION
MANUAL
VALVE (1/2HP)
KSVM-3
KSVM-4
Hand pumps and electric pumps for use
of both single and double acting
MANUAL
VALVE (1,2,3HP)
KMVM-3
KMVM-4
SOLENOID VALVE
(1/2HP)
KSVS-2C KSVS-2H
KSVS-4H KSVS-4A
By operating the solenoid to an electrical
signal to control the fluid direction.
SOLENOID VALVE
(1,2,3HP)
KSVM-2C KSVM-2H
KSVM-4H KSVM-4A
PILOT CHECK VALVE
(1/2HP)
KVPCS-10
KVPCW-10
Check valve with the same function and
in the reverse direction when the pilot
fluid supplied to flow.
PILOT CHECK VALVE
(1,2,3HP)
KVPCS-20
KVPCW-20
NEEDLE VALVE KNV-13
Adjust cylinder acting speed by adjusting
oil capacity.
THROTTLE
CHECK VALVE
KTCV-13
Limit the main or pilot oil flow of one or
two actuator ports.
STOP VALVE KTMV 2575
Adjust cylinder acting speed by adjusting
oil capacity.
MANIFOLD
(2-PORT)
KTMF 2522
For use of two cylinders with
one pump.
MANIFOLD
(4-PORT)
KTMF 2544
For use of several cylinders with
one pump.
48. ENPOS THE POWER OF IDEA! www.enpos21.com / enpos@enpos.co.kr / 82-51-832-1100
ACCESSORY
47 / www.enpos21.com
ITEM MODEL NO. DESCRIPTION
MANIFOLD
(6-PORT)
KTMFO 2529 For use of several cylinders with one pump.
MANIFOLD
(3-PORT)
KTMFY 2529 For use of two cylinders with one pump.
GAUGE
KTPG 64
KTPG-100
KTPG 100-25
Gauge face Dia 64 mm X 1000 bar
Gauge face Dia 100 mm X 1000 bar
Gauge face Dia 100 mm X 2500 bar
GAUGE
BLOCK
KTGA 7001
Gauge block for easy mounting of
a pressure gauge onto system
GAUGE
ADAPTOR
KTGA 7002
Gauge block for easy mounting of
a pressure gauge onto system
HOSE KTHS 700 Max. pressure 700 bar
COUPLER
KTBC 381M 3/8" PT Pin type (Male)
KTBC 381F 3/8" PT Pin type (Female)
PRESSURE
SWITCHES
KTPSC 7000 Pressure 700 bar
HYDTOOLS &ACCESSORIES
ENPOS KOREA HYDRAULIC CO
www.enpos21.com / enpos@enpos.co.kr / 82-51-832-1100
51. SHOP PRESS
www.enpos21.com / 50
ENPOS KOREA HYDRAULIC CO
Model Tonnage(ton) Detail Specification
Dimension (mm)
A B C
ESP ◎ O-20 □□□ 20
◎ : S or D
○ : H or F or M
735 905 1105
ESP ◎ O-30 □□□ 30
◎ : S or D
○ : H or F or M
735 905 1105
ESP ◎ O-50 □□□ 50
◎ : S or D
○ : H or F or M
450 710 830
ESP ◎ O-100 □□□ 100
◎ : D
○ : M
450 710 830
ESP ◎ O-150 □□□ 150
◎ : D
○ : M
600 1040 1240
ESP ◎ O-200 □□□ 200
◎ : D
○ : M
600 1040 1240
1. ◎ = S-> single acting cylinder, D-> double acting cylinder
2. ○ = H-> hand pump, F-> foot pump, M-> motor pump
3. □□□ = 50, 100, 150, 200, 250, 300-> choose the stroke
4. Special size is available(optional).
ESP ◎○ -XX □□□
SHOP PRESS Tonnage
EX) ESPSH-20100 : Single acting by hand pumpTonnage is 20ton, and stroke is 100mm.
>Capacity : 20 ~ 200TON
>Stroke : 50 ~ 300 mm
>Maximum pressure : 700 bar
>Coupler : KTBC 381F(PT 3/8)
>Specification
Ordering information
52. ENPOS THE POWER OF IDEA! www.enpos21.com / enpos@enpos.co.kr / 82-51-832-1100
SHOP PRESS
51 / www.enpos21.com
Model
Dimension (mm)
I
D E F G H
ESPM ◎ O-20 □□□ 300 295 1322 172 1930
Cylinder
Stroke
ESPM ◎ O-30 □□□ 300 295 1322 172 1930
ESPM ◎ O-50 □□□ 250 325 1325 305 1960
ESPM ◎ O-100 □□□ 130 325 1325 305 1960
ESPM ◎ O-150 □□□ 150 530 980 315 1775
ESPM ◎ O-200 □□□ 150 530 980 315 1775
1) Mortor pump (M)
Power : 1~ 5HP
Pmax : 700 bar
Voltage : 220V 3Ph 50/60 Hz
Oil capacity : 4-10 L / P.27
3) Foot pump (F)
Supply air : 7 bar
Pmax : 700 bar
Oil capacity : 1.5-2.5 L / P.24
2) Hand pump (H)
Oil capacity : 1500-2500 cc
Pmax : 700 bar / P.22
DESCRIPTION
Hand real
Main cylinder (P.4 ~ 7)
Sliding frame
Main frame
▶
Enpos shop press is including main frame, sliding frame, hand rill (to move frame), and main cylinder.
In addition customer can add the hyd power pack, motor pump, hand pump, or foot pump optionally.
HYDRAULIC EQUIPMENTS
53. BLOCK LIFTER
www.enpos21.com / 52
ENPOS KOREA HYDRAULIC CO
Model Tonnage(ton) Stroke (mm)
Type
Cart type Block type
EBL ◎ -50 □□□ 50 50,100,150,200,250 0
EBL ◎ -100 □□□ 100 100, 150, 200, 250, 300, 350, 400 0
EBL ◎ -150 □□□ 150 150, 200, 250, 300, 350, 400 0
EBL ◎ -200 □□□ 200 150, 200, 250, 300, 350, 400 0 0
EBL ◎ -300 □□□ 300 50, 200, 250, 300, 400 0 0
EBL ◎ -500 □□□ 500 200,250,300,350,400 0 0
EBL ◎ -700 □□□ 700 300, 400 0 0
1. ◎ = CART-A TYPE: CA, CART-B TYPE: CB, BLOCK TYPE: BL
2. □□□ = STROKE (*check the below table)
3. Special size is available(optional).
EBL ◎○ -XX □□
BLOCK LIFTER Tonnage
ASTHIS EQUIPMENT OF ONE BODYTYPE FOR HYDRAULIC JACK AND HYDRAULIC
PUMP, IS EASYTO MOVE.THIS EQUIPMENT, BLOCK LIFTER IS USED FOR LEVEL CON-
TROL IN BLOCKWELDING AND JACK-UPWORK.
>Capacity : 50 ~ 700TON
>Stroke : 50 ~ 400 mm
>Maximum pressure : 700 bar
>Specification
Ordering information
54. ENPOS THE POWER OF IDEA! www.enpos21.com / enpos@enpos.co.kr / 82-51-832-1100
BLOCK LIFTER
53 / www.enpos21.com
1) CART-A TYPE (CA)
2) CART-B TYPE (CB)
3) BLOCK TYPE (BL)
DESCRIPTION
DESCRIPTION
DESCRIPTION
This equipment is made up cart, hyd pump, hyd cylinder, and control box.
Hyd cylinder can be divided from cart.
This equipment is made up cart, hyd pump, hyd cylinder, and control box.
All in one type and having guide, so it is advantage for long stroke
This system can be specially synchronized operation, some of LIFTERS can be operated
by one wireless remote controller for block's minuteness level control
(up, down, right, left, forward & backward).
BLOCK LIFTERTYPE
Hyd cylinder
Cart
Hyd pump & cover
Hyd cylinder
Cart
Hyd pump & cover
Main hyd cylinder
Rear wheel & cylinder
Front wheel & cylinder
Driving unit
(Hyd motor)
Hyd pump & cover
Pistin rod guide
Sub cylinder
HYDRAULIC EQUIPMENTS
55. POWER PACK
www.enpos21.com / 54
ENPOS KOREA HYDRAULIC CO
EPP-60-O- ◎◎ -∆-XXXX-(OOOOO)+(Additional Option)
POWER PACK Hz( 50 or 60)
>Flow late : 10 ~ 150 L/m
>Maximum pressure : 700 bar
> Power :AC220/3Φ,AC380/3Φ,AC440/3Φ
Ordering information
Electric motor
Air breather
Control panel
Oil tank
DESCRIPTION
This unit is used for the operation of ramp, door and hatch cover. It is also
used for hydraulic line pressure test. As this system is small, lightweight and portable,
it can be moved freely in the car deck.
1. O = Motor Capacity 2HP ~ 100HP (unit; HP, only numbers when writing)
2. ◎◎ = Flow (unit; m3/Hr, only numbers when writing
At high.low pressure multi pump, write as " ◎◎ / ◎◎ ") (high/low)
3. ∆ = PORT No.
4. XXXX = TANK Capacity (unit; L(LITTER), only numbers when writing)
5. Motor Power(00000) = AC220/3 Ф , AC380/3 Ф , AC440/3 Ф
6. Control Power : AC220 X 60/50Hz X 1 Ф
7. Special size is available(optional).
56. ENPOS THE POWER OF IDEA! www.enpos21.com / enpos@enpos.co.kr / 82-51-832-1100
POWER PACK
55 / www.enpos21.com
Model
Pressure
(Flow late)
Option
EPP-50 or 60-O- ◎◎ -∆-XXXX-
(OOOOO)
700 bar
(10 ~ 150 L/m)
Other hydraulic accessory
>Specification
Power pack basic composition
Pressure gauge
Manifold
Oil vent
Level gauge
1) Pump
2) Oil tank
3) Pressure, Temperature, Level Gauge
4) Filter (Inlet/Outlet)
5) Manifold (port)
6) Control Box
7) Air-Breather
8) Sol valve
9) Relief valve
Accessory
▶
1) Sol valve / p.46
2) Pilot Check valve / p.46
3)Throttle Check valve / p.46
4) Manual valve / p46
5) Needle valve / p.46
6) Pressure,Temperature
Level Switch/ OEM
7) Oil cooler / OEM
HYDRAULIC EQUIPMENTS
57. JACK UP SYSTEM
www.enpos21.com / 56
ENPOS KOREA HYDRAULIC CO
DESCRIPTION
This equipment is produced for
Jacking of large block, and performs
simultaneous and individual actions.
1. ◎◎◎◎ = POWER PACK MODEL NO.
2. OPTION (XXXX) = Model no for Double Acting Cylinder
(EDR-series)
3. O = Cylinder qty'
EJU- ◎◎◎◎ -XXXX-O
JACK UP SYSTEM
Model
Specification Flow late(Pressure)
OPTION
Power pack Jack(Cylinder)
EJU- ◎◎◎◎ -XXXX-O
Flow late : 10 ~ 150 L/m
Max. pressure : 700 bar
Low load 200 TON below (P.8)
High load 300 ~ 1000 TON
SYNCHRONIZED
OPERATION
>Specification
Hyd Jack(Cylinder)Hyd hosePower pack
Jack up system diagram
Ordering information
SYNCHRONIZED OPERATION!!
INDEPENDENT OPERATION!!
59. ROCKYWASHER
ROCKYWASHER
www.enpos21.com / 58
ENPOS KOREA HYDRAULIC CO
1)KHW-B10H
Including
Air liquid pump
1)KHW-36H
Including
Air liquid pump
1)KHW-60H
Including
Air liquid pump
1)KHW-100H
Including
Air liquid pump
Option
▶
Water tank
Level gauge
Control Panel
Pump Injection gun
Hose & reel
DESCRIPTION
This equipment is water testing system of the cabin and
the hull. AndThis is produced as with AIR LIQUID PUMP
(option), so it can also do high pressure test at 700 bar.
1. Pump Standard by frequency (Pump : OEM)
1) 60Hz = MXV40-811-60 2) 50Hz = MXV50-1608/C
2. OPTION (XXXX) ----------- (Just blank if there is no option)
1) B10H : (1.5HP) X (ratio 10) X (output 16.7L/min)
2) 35H : (6HP) X (ratio 35) X (output 19.6L/min)
3) 60H : (6HP) X (ratio 60) X (output 11.4L/min)
4) 100H : (6HP) X (ratio 100) X (output 6.5L/min)
3. POWER(00000) = AC220/3 Ф , AC380/3 Ф , AC440/3 Ф
4. Special size is available(optional).
ERW60-1500-XXXX-(00000)
ROCKYWASHER Hz( 50 or 60) TANK CAPACITY
>Pressure : 16 bar (Option : 70 ~ 700 bar)
>Flow late : 12 m3/Hr
>Water gun nozzle : Ø12(I.D)
>Power :AC220/3Φ,AC380/3Φ,AC440/3Φ
Model Hz Flow late(Pressure) OPTION ( XXXX )
ERW60-1500-XXXX-(OOOOO)
60
12 m3/Hr
(16 bar)
Including AIR LIQUID PUMP
B10H, 35H, 60H, 100H
ERW60-2000-XXXX-(OOOOO)
ERW60-3000-XXXX-(OOOOO)
ERW60-4500-XXXX-(OOOOO)
>Specification
Ordering information
-If the Hz is changed to 50, the flow late and pressure should be 12m3/Hr (14.6 bar).
60. ENPOS THE POWER OF IDEA! www.enpos21.com / enpos@enpos.co.kr / 82-51-832-1100
FLUSHING UNIT
FLUSHING UNIT
59 / www.enpos21.com
DESCRIPTION
This equipment is designed and built up for flushing & testing inside the piping line of the vessels.
If leakage or any abnormal working are happened during test, the system stops automatically.
1. ◎◎ = FLOW
2. OPTION (XXXX) = Oil/water tank capacity
( Seperated TANK type _S ; ex) 1500S )
3. POWER(00000) = AC220/3 Ф , AC380/3 Ф , AC440/3 Ф
4. Special size is available(optional).
EFU-B-60- ◎◎ -XXXX-(OOOOO)
FLUSHING UNIT OIL: B,WATER:W Hz( 50 or 60)
>Pressure : 10 ~ 40 bar
>Flow late : 10 ~ 145 m3/Hr
>Power :AC220/3Φ,AC380/3Φ,AC440/3Φ
Model Flow late (Pressure) Liquid OPTION (XXXX) (Oil/Water tank capacity)(L)
EFU-B-60- ◎◎ -XXXX-(OOOOO)
10 ~ 145 m3/Hr
(10 ~ 40 bar)
Oil
1) All in one type : 500, 1000, 1500
2) Seperated type : 2000, 2500, 3000
EFU-B-50- ◎◎ -XXXX-(OOOOO)
8 ~ 120 m3/Hr
(10 ~ 40 bar)
Oil
1) All in one type : 500, 1000, 1500
2) Seperated type : 2000, 2500, 3000
EFU-W-60- ◎◎ -XXXX-(OOOOO)
100 ~ 150 m3/Hr
14 bar
Water 1) Seperated type : 2000, 2500, 3000
EFU-W-50- ◎◎ -XXXX-(OOOOO)
80 ~ 125 m3/Hr
14 bar
Water 1) Seperated type : 2000, 2500, 3000
>Specification
Oil tank
Air breather
Filter
Control panel
Heater
All in one type
Seperated typeMotor & pump
Return
Inltet
Relief valve
Ordering information
FLUSHING UNITHYDRAULIC EQUIPMENTS