Nano Disperser (High Pressure Homogenizer)
When material(Fluid) is passed orifice module under ultra high pressure condition, supersonics speed is formed by a rapid decrease in pressure. At this very moment, the material can be cell destruction, atomization, emulsion, dispersion, and liposome by impact, cavitation and turbulence shear stress of particle. Comparing with general homogenizer, Nano Disperser is more efficient and widely used in areas of chemical, food, cosmetics, petroleum and paints.
Nano Disperser (High Pressure Homogenizer)
When material(Fluid) is passed orifice module under ultra high pressure condition, supersonics speed is formed by a rapid decrease in pressure. At this very moment, the material can be cell destruction, atomization, emulsion, dispersion, and liposome by impact, cavitation and turbulence shear stress of particle. Comparing with general homogenizer, Nano Disperser is more efficient and widely used in areas of chemical, food, cosmetics, petroleum and paints.
일신오토클레이브는 디스플레이, 화학, 식품, 플랜트, 반도체 등의 분야에서 고온·고압 기술을 접목한 설비를 설계부터 가공, 조립, 제작, 운영 및 사후관리까지의 종합적인 Engineering 서비스를 제공하고 있으며, 각각의 분야에서 괄목할 만한 성과를 이루어 내고 있습니다.
IlshinAutoclave Co. Ltd Korea is a leading company in providing total engineering service as well as manufacturing high pressure and high temperature application equipments in the field of display, chemistry, food industry and semiconductor through design, machining, assembly, production and delivery to customers even up to process management service to customers.
하이플럭스 고압 레귤레이터 (High Pressure Regulator) 특징
ㆍType : 저압용 GPR, 고압용 HPR, 고압용 역압력조절기 BPR
ㆍ기체나 액체의 특성에 맞는 실링 타입을 적용하여 누수 방지
ㆍ화학, 정유, 워터젯, 연구분야, 기름, 가스 산업에 활용 가능
ㆍ다양한 압력·바디·포트 사이즈 구분으로 사용하고자 하는 스펙에 맞춰 사용가능
하이플럭스 공기압밸브 AOV (Air operated valve) 특징
- Normal Open Type : 평상시 밸브가 열려 있는 상태로 에어를 공급하면 밸브가 닫히는 타입의 자동밸브
- Normal Close Type : 평상시 밸브가 닫혀 있는 상태로 에어를 공급하면 밸브가 열리는 타입의 자동밸브.
- 다양한 압력 (5500, 7500, 11000, 11500, 20000, 60000psi)
- 2가지 타입 (Normal Open Type, Normal Close Type)
- 원하는 사양에 맞게 사용 가능한 4가지 타입의 하단부 바디 (Straight, Angle, 3Way/1on·2on pressure Type)
- 방폭이나 폭발 위험성이 있는 전기보다 안전한 환경에서 작업자의 용이한 조작이 가능
- 최소 5Kgf/㎠ 정도의 적은 압력으로도 에어가 공급되는 장소라면 어디에서든 사용 가능
- 가스와 액체 사용에서도 누설에 강한 Cone and thread connection 연결 방식
온도의 물성 변화가 필요한 제품을 목표온도에서 압착/고압처리 공정을 진행하는 설비로 분할되어 있던 Cold/Hot Lamination 공정을 한 공정으로 줄여 생산 효율성을 높임
It has the technology of isodirectional force with solvent liquid inside pressure vessel by high
pressure. There are applications of lamination in electronic industry and sterilization in food
industry, etc... It has many different high pressure depending on application of metal for mining process, electrical parts, food.
일신오토클레이브는 디스플레이, 화학, 식품, 플랜트, 반도체 등의 분야에서 고온·고압 기술을 접목한 설비를 설계부터 가공, 조립, 제작, 운영 및 사후관리까지의 종합적인 Engineering 서비스를 제공하고 있으며, 각각의 분야에서 괄목할 만한 성과를 이루어 내고 있습니다.
IlshinAutoclave Co. Ltd Korea is a leading company in providing total engineering service as well as manufacturing high pressure and high temperature application equipments in the field of display, chemistry, food industry and semiconductor through design, machining, assembly, production and delivery to customers even up to process management service to customers.
하이플럭스 고압 레귤레이터 (High Pressure Regulator) 특징
ㆍType : 저압용 GPR, 고압용 HPR, 고압용 역압력조절기 BPR
ㆍ기체나 액체의 특성에 맞는 실링 타입을 적용하여 누수 방지
ㆍ화학, 정유, 워터젯, 연구분야, 기름, 가스 산업에 활용 가능
ㆍ다양한 압력·바디·포트 사이즈 구분으로 사용하고자 하는 스펙에 맞춰 사용가능
하이플럭스 공기압밸브 AOV (Air operated valve) 특징
- Normal Open Type : 평상시 밸브가 열려 있는 상태로 에어를 공급하면 밸브가 닫히는 타입의 자동밸브
- Normal Close Type : 평상시 밸브가 닫혀 있는 상태로 에어를 공급하면 밸브가 열리는 타입의 자동밸브.
- 다양한 압력 (5500, 7500, 11000, 11500, 20000, 60000psi)
- 2가지 타입 (Normal Open Type, Normal Close Type)
- 원하는 사양에 맞게 사용 가능한 4가지 타입의 하단부 바디 (Straight, Angle, 3Way/1on·2on pressure Type)
- 방폭이나 폭발 위험성이 있는 전기보다 안전한 환경에서 작업자의 용이한 조작이 가능
- 최소 5Kgf/㎠ 정도의 적은 압력으로도 에어가 공급되는 장소라면 어디에서든 사용 가능
- 가스와 액체 사용에서도 누설에 강한 Cone and thread connection 연결 방식
온도의 물성 변화가 필요한 제품을 목표온도에서 압착/고압처리 공정을 진행하는 설비로 분할되어 있던 Cold/Hot Lamination 공정을 한 공정으로 줄여 생산 효율성을 높임
It has the technology of isodirectional force with solvent liquid inside pressure vessel by high
pressure. There are applications of lamination in electronic industry and sterilization in food
industry, etc... It has many different high pressure depending on application of metal for mining process, electrical parts, food.
하이플럭스 고압 튜브 (High Pressure Tube) 특징
ㆍStainless steel 316 소재 사용
ㆍ작동온도는 -423°F (-252°C)부터 1200°F (649°C)까지
ㆍ수압 시험을 원하시면 사용 압력하에 정해진 규칙(가스안전법)에 의거 대행 가능
ㆍ화학, 정유, 연구, 기름, 가스 산업체의 Tubing으로 다양한 압력에 사용됨
고압 니플 (High Pressure Nipple) 특징
ㆍStainless steel 316 소재로 제작, 뛰어난 내식성과 우수한 경도
ㆍ화학, 정유 및 기름, 가스 산업 등 산업 전반에 걸쳐 널리 사용 가능
하이플럭스 압력 게이지(pressure Gauge) 특징
- 쉽고 빠른 장비 구성을 위한 고압용 압력게이지.
- 외부 조건 변화에 강한 뛰어난 내식성.
- Stainless steel 소재 사용으로 정밀도가 높은 압력계에 사용.
- Silicone 액의 윤활성으로 마모 방지 및 점성 저항을 이용한 진동 억제.
- 기계적 진동과 맥동이 심한 환경에서의 압력 측정에 적합.
- 일반 압력계 대비 높은 성능과 내구성 및 수명.
릴리프밸브(Relief valve)
Factory Set 제품은 시스템 오작동 등의 이유로 시스템 내부 압력이 설정된 압력 이상으로 상승할 경우 압력을 배출하여 시스템 및 기타 장치를 보호. 압력 배출 후에는 설정된 압력 보다 낮은 압력으로 유지시키는 밸브를 말합니다.
Field Adjustable 제품은 시스템 내부 압력이 설정된 압력 이상으로 상승 할 경우 압력을 배출하여 Overpressure 로부터 시스템을 보호하며, 압력설정은 고객이 직접 밸브 상단의 무드 랜치 볼트를 조정하여 현장에서 손쉽게 조절 가능합니다.
Proportional Type 제품은 시스템 내부 압력이 증가함에 따라 점진적으로 열리는 밸브입니다. 차압이 커질 수록 유량이 증가하기 때문에 유량이 많거나 압이 갑자기 급격하게 올라가는 시스템에서도 사용이 가능 합니다.
고객의 생각을 만드는 기업 일신오토클레이브.
일신오토클레이브는 지난 1993년 시작으로 국내 고온·고압분야 선도기업으로 발전해왔습니다.
국내와 해외에서 인정받으며 인증서, 수상, 특허, 상표등록 등 인증 건수만 93건. 가족친화 우수기업, 청년친화강소기업 선정.
일신오토클레이브의 도전은 여기서 멈추지 않고 그동안의 기술과 노하우를 통해 해외시장 개척에도 박차를 가하고 있습니다.
Ilshin AutoClaive, a company that makes customers' thoughts.
Ilshin AutoClaive has been developing into a leading company in the field of high temperature and high pressure in Korea since 1993.
It is recognized both at home and abroad and has 93 certifications including certificates, awards, patents, and trademark registration. Excellent family-friendly enterprises, selected as youth-friendly small businesses.
Ilshin AutoClaive's challenge does not stop here, it is also speeding up its efforts to develop overseas markets through its technology and know-how.
일반적인 액체나 기체와는 다른 고유의 특성을 초임계 유체라 합니다. 이 초임계 유체를 이용한 기술이 초임계기술입니다. 기체와 액체의 중간 정도의 물성을 가지고 있으며, 상변화 없이도 약간의 압력 온도 변화에 따라 물성을 급격히 변화시킬수 있습니다.
It has application of extraction and drying system by technology of supercritical point with carbon dioxide.
고압반응기는 다양한 실험을 수행하기 위한 다목적용 반응기와 중합반응기, 초고온/초고압반응기, 그리고 특수한 실험 및 생산을 수행하기 위한 스페셜반응기로 분류하여 제작합니다.
It has diverse applications which are hydrothermal and decomposition, sublimation, extraction in laboratory by high pressure and temperature with various optional device.
균일한 압력과 온도 공정 장비를 진행하며 층압, 성형에 적용되는 공정입니다.
It has application for lamination and to remove voids both layers in industries of touch panel and LCD, PDP, Semi conductor
고온·고압기술을 주력으로 하는 일신오토클레이브는 사용목적에 맞도록 다양한 압력용기를 제작하고 있습니다. 압력용기는 말 그대로 부피의 변화없이 용기의 내·외부에서 일정한 유체(액체/기체)압을 받는 용기를 말합니다.
Ilshin autoclave is providing many dirrerent size of pressure vessel. Depending on application and customer's requirement, it's available many different size with high pressure and temperature, optional devices.
용기를 자전 & 공전시켜 고점도의 재료를 짧은 시간에 Mixing과 탈포처리하는 장비. 타입 별 진공라인 추가가 가능하여 내압력을 제거하며 액체(Liquid)에 존재하는 Micro Bubble 까지 탈포 가능
paste mixer is used for mixing wide range of viscosity without agitator and it has high speed of rotation and orbital as same time which it make good a result of homogenization and mixing.
유체의 세포파괴, 미립화, 유화, 리포솜 등의 화학반응으로 농도의 균일, 균질화를
얻기 위해 적용되는 장비입니다.
Nano disperser makes dispersion of particle passing through the nozzle chamber with ultra high pressure and ther are force of impact, cavitation and share stress in the nozzle chamber. It used in applications of chemical, food, cosmetics, petroleum and pants.
자석을 이용한 교반기로, 고온 고압조건에서 고속회전이 가능하며, 가스,액체,고점도 시료의 혼합 및 확산,분산 등에 적용합니다.
ilshin autoclave is providing many different size of pressure vessel. Depending on application and customer's requirement. It's available many different size with high pressure and temperature, optional devices.
롤러 사이의 미세한 간극으로 시료를 통과시켜 정밀한 분쇄와 분산의 효과를 얻을 수 있는 장비로 롤러의 Size에 따라 장비의 모델을 구분
Three roll mill is a machine that uses shear forces created by three horizontally positioned rolls rotating in opposite directions and different speeds relative to each other, in order to mix, refine, disperse, or homogenize viscous materials ted into it.
HPP (High Pressure Processing) is a non-thermal pasteurization technology that uses high water pressure to kill pathogens and extend the shelf life of foods without changing their taste, texture, or nutritional value. The document provides details on the specifications and applications of isostatic presses, nano dispersers, and HPP. HPP can be used to sterilize meats, seafood, vegetables, fruits, juices, and ready-to-eat products. It reduces foodborne illnesses while maintaining quality and freshness. HPP processing times are short and do not require chemicals or heating, making it an eco-friendly alternative to traditional preservation methods.
This document provides information on high pressure processing (HPP) technology. It discusses how HPP can maintain flavor and nutrition while extending the shelf life of foods without using heat or preservatives. Various applications of HPP for juices, meats, seafood, fruits and ready-to-eat products are described. HPP uses high water pressure to inactivate microorganisms and extend shelf life while keeping foods fresh-tasting and preserving their original qualities and nutritional value.
1. 고객의 생각을 만듭니다.
초임계 추출 시스템 Supercritical Extraction System
초임계 수열합성 시스템 Supercritical Hydrothermal System
초고압 분산기 High Pressure Homogenizer
정수압 프레스 Isostatic Press
오토클레이브 Autoclave for Hydrothermal & Chemical Reaction
항온가압챔버 Autoclave for Binding Film & Glass
2. Contents
회사소개 Overview
03
초임계 추출 시스템 Supercritical Extraction System
04 - 05
초임계 수열합성 시스템 Supercritical Hydrothermal System
06 - 07
초고압 분산기 High Pressure Homogenizer
08 - 09
정수압프레스 Isostatic Press
10 - 11
오토클레이브 Autoclave (for Hydrothermal & Chemical Reaction)
12 - 13
항온가압 챔버 Autoclave (for Binding Film & Glass)
14 - 15
3. (주)일신오토클레이브는 고온・고압 장비 및 시스템 개발 업체로 오토클레이브, 초임계 유체 시스템, 압력 용기, 정수압 프레스, 수열합성기 및 고압분산기
등 해외의존도가 높은 산업용 설비, 플랜트 및 연구장비를 설계 ・제작하는 기업입니다.
(주)일신오토클레이브는 정밀한 설계와 지속적인 품질관리로 국내 고온・고압분야의 선두주자임을 자신하며, 주요 생산품목인 오토클레이브 및 초임계
관련장비, 고압반응기는 세계적인 수준에 도달해 있습니다. 고객만의 특수성을 면밀히 검토한 후 설계 및 제작하는 철저한 고객 중심적인 주문제작
방식을 고집하고 있어 어느 제작사보다도 고객의 요구와 편의에 있어서 가장 적절하고 유용한 장비를 제작할 수 있습니다. 또한, 다년간의 경험과
기술력을 바탕으로 한 정확하고 신속한 고객 지원 및 A/S 역시 당사의 장점입니다.
설비 분야에 있어서는 연구용 설비 뿐 아니라 기술 집약적인 Pilot과 Plant규모의 생산용 고온・고압 설비를 설계・제작해 국내 다수의 기관 및 기업에
납품하고 있습니다. 이렇게 다년간 축적한 기술과 숙련된 전문 Engineer들의 노하우는 사용자의 요구를 만족시킬 수 있다고 자부합니다.
당사는 초고압 분야의 글로벌 리더로 거듭나기 위해 지속적인 연구개발과 과감한 설비 투자로 기술을 발전시키고 있습니다. 또한, 언제나 고객의 소리에
귀 기울이고 고객의 입장에서 제품을 제작하고 있습니다.
(주)일신오토클레이브는 이러한 기본을 지키며 성장하는 기업이 되도록 최선의 노력을 다하겠습니다.
주요 취급품목
초임계 유체 추출 시스템 Supercritical Fluid Systems Extraction System
초임계 수열합성 시스템 Supercritical Fluid Hydrothermal Synthesis System
오토클레이브 Autoclaves
압력용기 Pressure Vessels
정수압프레스 Isostatic Press (C.I.P, H.I.P, W.I.P, etc)
초고압 분산기 High Pressure Homogenizer
Pressure Tester, Corrosion Testing System, Pumps, etc.
주요 인증 및 특허
ASME / ISO 9001 / ISO14001
S STAMP
U STAMP
U2 STAMP
ISO9001
ISO14001
대표브랜드
Suflux는 고온/고압의 유체의 흐름과 제어를 완벽하게 수행하는 부품들의 브랜드입니다.
Suflux는 Super + Flux 의 합성어로 “굉장히 좋은, 대단한 + 끊임없는 변화, 흐름”의 사전적인 의미를 가지고 있으며 고품질의 제품으로 완벽한 제어가
가능하다는 의미이며 지속적인 연구를 통해 혁신적인 제품 개발을 한다는 의미를 가지고 있습니다.
03
4. 초임계 추출 시스템 Supercritical Extraction System
Supercritical Extraction System
초임계 유체 추출 기술은 초임계 유체를 용매로 사용하여 물질을 분리하는 기술로 혼합물의 분리, 고분자물질의 정제, 천연식물로부터 의약, 향료와 같은
유효성분의 분리 등에 적용됩니다. 또한, 에너지를 절약할 수 있는 무공해 공정개발로 그 응용범위가 넓으며, 최근 상업화가 활발히 진행되는 분리기술입니다.
특징
환경과 인체에 친화적인 청정기술
고순도/ 고품질의 제품 공정에 응용할 수 있는 기술 (선택적 추출, 열변성 물질 저온공정 안정생산)
에너지 절약공정 기술, 고속공정 기술
잔존 유기용매가 없음
초임계 물리적 특성 이용 (낮은 점성, 높은 확산력, 강한 용해력)
적용분야
: 의약품 공업/ 식품 공업/ 화장품/ 향료산업/ 화학 공업/ 에너지 산업
식품 원료 (참기름 추출, 식물성분 추출, 난황레시틴 추출)
유효성분 분리/정제 (농약 잔류물 제거, 유해성분 제거)
생활용품 원료
천연 향료
천연 색소
한방 약재
Plant (고액겸용)
R & D Equipment
04
Plant (분체용)
Pilot Equipment
5. 고객의 생각을 만듭니다.
www.suflux.com
초임계 추출 시스템 Supercritical Extraction System
Specification
Type
R & D Equipment
Pilot Equipment
Plant
Product
Extarctor
Convertible for Solide & Liquid
- Max. Working : 10,000psi @ 90℃
- Volume : 1 L
- Cover Type : Quick Closure Clamp
Convertible for Solide & Liquid
- Max. Working : 10,000psi @ 80℃
- Volume : 100L × 2 unit
- Yoke Frame Type
- Cover Type : Quick Closure Clamp
No Basket Type
- Max. Working : 6,500psi @ 80℃
- Volume : 2,300L × 3 unit
- Cover Type : Quick Closure Clamp
Separator
- Max Working : 3,000psi @ 90℃
- Volume : 0.2L× 2 unit
- Cover Type : Quick Closure Clamp
- Max Working : 3,000psi @ 90℃
- Volume : 50L × 2 unit
- Cover Type : Bolt Closure
- Max Working : 3,000psi @ 90℃
- Volume : 1st 600L × 3 unit
2nd 500L × 3 unit
3rd 300L × 3 unit
- Cover Type : Bolt Closure
High Pressure Pump
Moter Driven Plunger
- Max. Outlet Pressure : 10,000psi
- Max. Flow Rate : 70ml/min
- 220VAC, 3-ph, 1HP
Electro-Hydraulic Driven Piston Type
- Max. Outlet Pressure : 10,000psi
- Max. Flow Rate : 13L/min
- 380VAC, 3-ph, 30HP
Electro-Hydraulic Driven Piston Type
- Max. Outlet Pressure : 6,500psi
- Max. Flow Rate : 160 L/min
- 3,300VAC, 3-ph, 200HP
Co-Solvent Pump
- Type : Plunger
- Max. Outlet Pressure : 10,000psi
- Max. Flow Rate : 10ml/min
- 220VAC, 1-ph
Electro-Hydraulic Driven Piston Type
- Max. Outlet Pressure : 10,000psi
- Max. Flow Rate : 1.2L/min
- 220VAC, 3-ph, 5HP
Electro-Hydraulic Driven Piston Type
- Max. Outlet Pressure : 6,500psi
- Max. Flow Rate : 25L/min
- 380VAC, 3-ph, 40HP
Pre-Heater
Heating Bath Type
- Max. Temp : 90℃
Double Pipe Type × 2 unit
- Max. Temp : 80℃
Double Pipe Type × 6 unit
- Max. Temp : 80℃
Condenser
Chiller Type
- Temp. Range : -5℃
Shell in Tube Type × 2 unit
- Temp. Range : -2℃
Double Pipe Type × 9 unit
- Temp. Range. : -2℃
CO2 Reservoir
- Volume : 5 L
- Max. Pressure : 3,000psi
- Volume : 300 L
- Max. Pressure : 3,000psi
- Volume : 1500 L × 4 unit
- Max. Pressure : 3,000psi
Liquid CO2 Tank
- 0.04 ton
- 20 ton
- 70 ton
* 기본사양 이외의 압력사항 및 조건은 기술영업 담당자와 상담 후 주문제작이 가능합니다.
초임계 추출 관련 장비
초임계 나노입자 제조 장비 (SAS, RESS)
초임계 건조 장비
초임계 합성 장비
초임계 발포장비
초임계 세정 장비
05
6. Supercritical Hydrothermal System
초임계수열합성 시스템 Supercritical Hydrothermal System
수열합성은 밀폐된 시스템내에 상온, 상압 이상의 조건에서 일어나는 용액의 비균질 화학반응을 이용한 방법으로 직접 응용이 어려울 때 많이 쓰이는 합성
방법으로, 초임계수열합성은 온도와 압력이 초임계 조건인 수열합성을 의미합니다.
물을 가열・가압하여 아임계, 초임계 상태로 변화시키면 비중, 유전상수, 이온곱, 수산화물, 산화물의 용해도와 같은 물리적 성질이 급격히 변하게 됩니다.
이러한 초임계수의 물성 변화를 이용하면 고결정성이면서 초미립 크기의 금속산화물 등을 합성할 수 있어 주목받고 있는 기술입니다.
특징
초임계 수열합성 공정
높은 과포화도 및 빠른 결정성장 속도를 갖습니다.
빠른 반응속도와 연속공정으로 인해 생산성이 높습니다.
결정화를 위한 별도의 하소공정이나 밀링 공정이 없어 외부 불순물이
발생하지 않습니다.
온도와 압력의 조작으로 물성(과포화도)을 조정하여 형상(크기,형태)의
Pre-heater
제어가 가능합니다.
Reaction
Vessel
적용분야
G
G
Heater
G
: 금속산화물 나노입자 제조
Heat Exchanger
G
광소자용
연마재 (SiO2, TiO2, SiO2)
자기용
화장품(ZnO, TiO2)
구조용
촉매 (CeO2, TiO2,산화철)
귀금속 (PE, Pd)
안료코팅
전자소자용 (LiO2,SnO2, dolpeld ZnO, ITO, ATO, BaTiO3, SrTiO2, ZnO)
R & D Equipment
Plant
06
Pump
Pump
Pump
Reservoir filter
Solution1 Solution2 Water
R & D Equipment
Plant
Solid Sample
Air/water
Separator
Liquid Sample
7. 고객의 생각을 만듭니다.
www.suflux.com
Specification
R & D Equipment
(Continuous Type)
Plant
(Continuous Type)
- Material : INC600
- Max. Working : 5,000psi@600℃
- Volume : 1 L
- Cover Type :Bolt Closure
- Gasket : INC600
- MagneDrive
- Tube Type
- Material : INC600
- Max. Working : 5,000psi@600℃
- Volume : 0.05 L ~
- Tube Type
- Material : SUS316
- Max. Working : 5,000psi@450℃
- Volume : 2.8 L ~
초임계수열합성 시스템 Supercritical Hydrothermal System
R & D Equipment
(Batch Type)
Type
Product
Reaction Vessel
- Gasketless
- N/A
- Ceramic Mold Vertical Type
- Max. Working : 5,000psi@600℃
- 380VAC, 3-ph, 10kw
- Plange Sheath Type
- Max. Working : 5,000psi@450℃
- 380/440VAC, 3-ph, 100kw
- Moter Driven Plunger Type
- Max. Outlet Pressure : 5,000psi
- Max. Flow Rate : 140ml/min
- 220VAC, 3-ph, 1HP
- Moter Driven Plunger Type
- Max. Outlet Pressure : 5,000psi
- Max. Flow Rate : 24ml/min
- 220VAC, 1-ph, 0.16 HP
- Electro-Hydraulic Driven Piston Type
- Max. Outlet Pressure : 5,000 psi
- Max. Flow Rate : 5/min
- 220VAC, 3-ph, 3HP
- Accumulator
- Furnace or Band Type
- 220VAC, 1-ph, 3kw
- Ceramic Mold Horizontal Type
- 380VAC, 3-ph, 6kw
- Ceramic Mold Vertical Type
- 380/440VAC, 3-ph, 10kw
- N/A
Shell in Tube type
- Max. Pressure : 5,000psi
- Temp Range : 0~50℃
- Cooling Rate : 450℃ → 30℃
Internal Coil type
- Max. Pressure : 5,000psi
- Temp Range : 0~50℃
- Cooling Rate : 450℃ → 30℃
- N/A
- Material : SUS304
- Max. Working : 5,000psi@80℃
- Volume : 2L
- Cover Type :Bolt Closure
- MagneDrive
- SUS Mesh Filter Integrated
- Material : SUS304
- Max. Working : 5,000psi@80℃
- Volume : 70L
- Cover Type :Bolt Closure
- MagneDrive
- SUS Mesh Filter Integrated
Solution Tank
- N/A
- Material : SUS304
- Volume : 3L
- Material : SUS304
- Volume : 250L
Receiver Tank
- N/A
- Material : SUS304
- Volume : 20L
- Material : SUS304
- Volume : 2500L
Option
- N/A
- Data Acquition
- Data Acquition
Pre-Heater
High Pressure Pump
Reaction Heater
Condenser
Filtering Vessel
* 기본사양 이외의 압력사항 및 조건은 기술영업 담당자와 상담 후 주문제작이 가능합니다.
07
8.
9. www.suflux.com
Specification
Production Equipment
(Hydraulic Driven Type)
Pilot Equipment
(Hydraulic Driven Type)
R & D Equipment
(Air Driven Type)
R & D Equipment
(Motor Driven Type)
Model : ISA-N-400H
Type
Model : ISA-N-30H
Model : ISA-N-30A
Model : ISA-N-10M
Product
Hydraulic Unit System
Air Driven Intensifier Pump
Motor Driven Pump
Pump
System
- Piston Pump
- Max Outlet Pressure : 3,500psi
- Max Temperature : 60
- 380VAC, 3-Ph, 60Hz, 50HP
- Piston Pump
- Max Outlet Pressure : 2,500psi
- Max Temperature : 60
- 220VAC, 3-Ph, 60Hz, 5HP
- Operating Pressure : 3,000~23,000psi
- Air Compressor Requirements
: 27L/sec@120psi
- Operating Pressure: 3,000~22,000psi
- 220VAC, 1-Ph, 60Hz, 1Hp
High
Pressure
Intensifier
Hydraulic Driven Type(Double)
Hydraulic Driven Type(Single)
Air Driven Type
Motor Driven Type
- Max Working Pressure: 30,000psi
- Flow Rate : 4 L/min(@30,000psi)
- Max Working Pressure: 40,000psi
- Flow Rate: 300 ml/min (@40,000psi)
- Max Working Pressure: 23,000psi
- Flow Rate: 300 mL/min (@20,000psi)
- Max Working Pressure : 30,000psi
- Flow Rate : 100mL/min(@22,000psi)
- Air Driven Pump
- Max. Outlet Pressure : 110psi
- Max. Flow Rate : 10 LPM
- 2L Container
- Manual
- 1L Container
- Manual
- 500 mL Container
- Automatic, Manual
- 500 mL Container
Regulator Control & Pressure Gauge
PCB Control
Feeding
System
Digital Control & Indicator of Pressure
Digital Control & Gauge of Pressure
Control
System
- Connect Motor : Wye-Delta Type
- Explosion-Proof Construction
(Optional)
- Connect Motor : Wye-Delta Type
(Optional)
Structure
All SUS 304
All SUS 304
Al or SUS 304
Al or SUS304
Orifice
Module
- Housing Material : SUS 316
- Hole Size : Customer Choice
(75, 100, 200, 400
- Housing Material : SUS 316
- Hole Size : Customer Choice
(75, 100, 200, 400
- Housing Material : SUS 316
- Hole Size : Customer Choice
(75, 100, 200, 400
- Housing Material : SUS 316
- Hole Size : Customer Choice
(75, 100, 200, 400
Condenser
- All SUS 304/316
- Spiral Double Pipe
- Capacity : Up to 1 RT
- All SUS 304/316
- Spiral Double Pipe
- All SUS 304/316
- Spiral Double Pipe
Accessories
High Pressure Valve & Block etc.
High Pressure Valve & Block etc.
High Pressure Valve & Block etc.
High Pressure Valve & Block etc.
Dimension
2,250(D) x 800(W) x 1,500(H) mm
800(D) x 850(W) x 1,500(H) mm
330(D) x 400(W) x 640(H) mm
310(D)X450(W)X300(H) mm
Weight
950 kg
220 kg
27 kg
(High Pressure Homogenizer)
Hydraulic Unit System
30 kg
)
)
)
)
- All SUS 304
- Chamber Cooling
09
10. Isostatic Press
Isostatic Press(IP; 정수압 압착기)는 성형되는 제품에 모든 방향으로 압력이 균일하게 전달되는 원리를 이용한 장비입니다.
세라믹, 금속 등의 분말을 1차 성형하고, 유연성을 갖는 몰드에 넣어서 고압 용기 내부에 장입한 후 압력용기 내부를 유체를 이용하여 고압으로 형성시키면,
이때의 유체내 물체는 모든 방향에서 압착이 되면서 균일한 밀도의 성형체가 됩니다.
고강도를 요하는 항공산업, 전력 부품 및 방산 부품 등에 적용되었으나, 현재는 기술의 개발과 실용화가 이루어져서 생활용품이나 반도체 부품 등의 생산에도
적용되고 있습니다.
IP(Isostatic Pressing) 원리
Powder
Elastic Mould
정수압 프레스 Isostatic Press (IP)
Pressure Vessel
Powder
Pressure Medium (Liquid)
Elastomer Mold
특징
적용분야
압력이 균일하게 분포
Hybrid Chips
정밀한 수축 제어
MLCC(Multi-layer Ceramic Capacitors)
제품의 균일한 열전달
Multilayer PZT(Piezo Actuators)
운전중 제품의 회전 불필요
Bluetooth Components
제품의 Edge Trimming 불필요
Fuel Cells
제품의 Edge Rounding 현상 미발생
Medical Electronics & Implants
제품의 Camber 현상 미발생
LTCCs(Low Temperature Confired Ceramics)
Varistors
Other Laminated Electronic Components
Food High Pressure Processing
Production Equipment
Pilot Equipment
Pin Type
Yoke Type
10
R & D Equipment
After IPping
11. 고객의 생각을 만듭니다.
www.suflux.com
Specification
Type
R & D Equipment
Pilot Equipment
Production Equipment
Internal Dia.
Vessel
Size Internal length
25 ~ 150 mm
150 ~ 300 mm
300 mm ~
100 ~ 300 mm
200 ~ 500 mm
500 mm ~
~ 60,000 psi
~ 60,000 psi
~ 60,000 psi
- Alloy Steel/ Stainless Steel
- Alloy Steel/ Stainless Steel
- Alloy Steel/ Stainless Steel
Products
Max. Pressure
- Pneumatic Actuated Pin Closure Type
or Manual Type
- Up & Down Lift
- Top Cover Sealing
: O-ring & Metal Backup
Closure Type
- Pneumatic Actuated Pin Closure Type
or Quick Close & Yoke Flame
- Up & Down Lift
- Top Cover Sealing
: O-ring & Metal Backup
정수압 프레스 Isostatic Press (IP)
Material
- Pneumatic Actuated Pin Closure Type
or Quick Close & Yoke Flame
- Up & Down Lift
- Top Cover Sealing
: O-ring & Metal Backup
High Pressure Pump
- 1 Step Air Driven Liquid Pump
- 1 Step Air Driven Liquid Pump
- 2 Step Air Driven Liquid Pump
· 1st Low Pressure Pump
(Air Driven Type)
· 2nd High Pressure Pump
(Air Driven Type
or Hydraulic Intensifire Type)
Control
- Valve Control : Manual
- Set Control : Pressure, Time, Alarm
- Touch Screen & PLC
- Valve Control
: Air Operating & Auto Air Vent & Manual
- Set Control : Pressure, Time, Alarm
- Touch Screen & PLC
- Valve Control
: Air Operating & Auto Air Vent & Manual
- Set Control : Pressure, Time, Alarm
* 기본사양 이외의 압력사항 및 조건은 기술영업 담당자와 상담 후 주문제작이 가능합니다.
공정에 따른 분류
Type
Pressure
Temperature
CIP (Cold Isostatic Press)
~ 60,000 psi
~ 30 ℃
HIP (Hot Isostatic Press)
~ 30,000 psi
~ 2000℃
WIP (Warm Isostatic Press)
~ 30,000 psi
~ 120 ℃
HPP (Food High Pressure Processing)
~ 100,000 psi
Room Temperature
11
12. Autoclave for Hydrothermal & Chemical Reaction
Autoclave는 고압반응기를 통칭하는 용어로, 산업 및 연구 목적으로 고온・고압의 환경에서 합성, 분해, 승화, 추출 등의 화학반응을 유도할 수 있는 내열・
내압성 용기를 의미합니다. 일신오토클레이브의 설비는 ASME (American Society of Mechanical Engineers: 미국 기계 기술자 협회)의 Pressure Vessel
Code를 기초로 설계/ 제작하여 뛰어난 안전성을 가지고 있으며, 다양한 재질 및 사양 적용으로 재료, 화학 등 여러 분야에서 적용되고 있습니다.
특징
적용 분야
ASME Pressure Vessel Code에 의한 설계로 뛰어난 안정성
중합 반응
다양한 specification으로 제작 가능
촉매 반응
뛰어난 온도 균일성과 재현성
수열 합성
초보자도 사용할 수 있는 간편한 작동법
시멘트 양생
편리한 유지 보수
부식 반응
교반장치, 진동장치, 그 밖에 회전장치를 수반하는 사양으로도 제작
산화 반응
초고압 반응
자전연소 반응
항온가압 반응
오토클레이브 Autoclave for Hydrothermal & Chemical reaction
기타고온/고압 환경을 요구하는 반응
Production Equipment
R & D Equipment
Production Equipment
12
R & D Equipment
R & D Equipment
13. 고객의 생각을 만듭니다.
www.suflux.com
Specification
Non Stirred Type
Stirred Type
Type
R & D Equipment
Production Equipment
R & D Equipment
Production Equipment
Vessel
- Material : SUS316
- Max. Working : 5000psi@300℃
- Volume : ~ 6 L
- Cover Type : Bolt closure
- Material : SUS316
- Max. Working : 4300psi@300℃
- Volume : ~ 100 L
- Cover type : Bolt closure
- Material : SUS316
- Max. Working : 5000psi@300℃
- Volume : ~ 5 L
- Cover type : Bolt closure
- Material : SUS316
- Max. Working : 4300psi@300℃
- Volume : ~100 L
- Cover type : Bolt closure
Assembly
- O-Ring : Below 150℃
- Teflon : 150~250℃
- Metal : Over 250℃
- Liner Type : Teflon (Option)
- O-Ring : Below 150℃
- Teflon : 150~250℃
- Metal : Over 250℃
- Liner Type : Teflon (Option)
- O-Ring : Below 150℃
- Teflon : 150 ~250℃
- Metal : Over 250℃
- Liner Type : Teflon (Option)
- MagneDrive
- O-Ring : Below 150℃
- Teflon : 150~250℃
- Metal : Over 250℃
- Liner Type : Teflon (Option)
- MagneDrive
Heating device
- Ceramic Band Heater
- 220VAC, 1-ph(3-ph), 2kw
- Ceramic Band Heater
- 380VAC, 3-ph, 10kw
- Ceramic Band Heater
- 220VAC, 1-ph(3-ph), 2kw
- Ceramic Band Heater
- 380VAC, 3-ph, 10kw
Controllor
- Main Temp.
- Over Temp.
- Timer
- Pressure
- Main Temp.
- Over Temp.
- Timer
- Pressure
- Main Temp.
- Over Temp.
- Timer
- Pressure
- Speed
- Main Temp.
- Over Temp.
- Timer
- Pressure
- Speed
Accessaries
- Pressure Gauge
- Pressure Transducer
- Relief Valve
- Pressure Gauge
- Pressure Transducer
- Relief Valve
- Pressure Gauge
- Pressure Transducer
- Relief Valve
- Impeller & Shaft
- Pressure Gauge
- Pressure Transducer
- Relief Valve
- Impeller & Shaft
Option
- Liquid Pump
- Vaccum Pump
- Chiller
- Gas Booster
- PLC Control
- Liquid Pump
- Vaccum Pump
- Chiller
- Gas Booster
- Liquid Pump
- Vaccum Pump
- Chiller
- Gas Booster
- PLC Control
- Liquid Pump
- Vaccum Pump
- Chiller
- Gas Booster
Product
오토클레이브 Autoclave (for Hydrothermal & Chemical Reaction)
* 기본사양 이외의 압력사항 및 조건은 기술영업 담당자와 상담 후 주문제작이 가능합니다.
13
14. Autoclave for binding film & glass
Touch Panel 및 소형 LCD 접합용 Autoclave는 Electronic 산업 부분의 발달로 다양한 제품들에 적용됩니다.
Touch Panel과 핸드폰 액정 등과 같은 필름접합부분은 여러 장의 Flim을 접합을 필요로 하며, Flim 층간의 기포를 제거하는 것이 중요합니다. 항온가압챔버는
이러한 층간기포를 제거함으로써 품질을 향상시킬 수 있습니다. 또한, 온도와 압력외에 진공/냉각 방식을 적용하여 기포제거 및 압착력을 향상시킬 수 있습니다.
항온가압챔버 원리
항온가압챔버 적용사례
Area not adhered to
PET or PC Film
Adhesion finished
PET or PC Film
Layer
Layer
Glass or Film
Glass or Film
Autoclave
Process
Bubble existing
Protection Film
Protection Film
LCD Glass
Autoclave
Process
Bubble eliminated
LCD Glass
Autoclave 공정 전
특징
Autoclave 공정 후
Bubble
뛰어난 온도 균일성과 재현성
제품의 열처리 및 응력제거로 인한 제품의 균질화
일방향 압착인 Press 방식이 아닌 등방향 항온 압착 방식
Autoclave
Process
모서리 부분 접착강화 및 내부 미세기포 제거에 의한 Panel 접착력,
강도 증가 및 시인성 향상
세팅 압력과 온도의 정확한 편차
항온가압챔버 Autoclave for binding film & glass
적용분야
모니터 액정, 핸드폰 액정, 계산기 액정, 네비게이션 액정 등 필름, 유리필름 접합
14
15. 고객의 생각을 만듭니다.
www.suflux.com
Specification
Touch Panel & LCD, PDP
Binding Autoclave
Type
Pressurizing Autoclave
Glass Binding Autoclave
Product
- Material : SUS304 & SCM
- Max. Working : 900psi@200℃
- Working Zone : I.D : 300~820 mm
L.D : 500~3,000 mm
- Seal Type : O-ring
- Cover Type : Quick Closure Clamp
- Material : Alloy Steel & SCM
- Max. Working : 900psi@200℃
- Working Zone : I.D : 300~820 mm
L.D : 500~100,000 mm
- Seal Type : O-ring
- Cover Type : Quick Closure Clamp
Heater
- Kantal Bellows Heater
- Cover Material : SUS304
- Forced Conection
- 220/380VAC, 3-ph, 9kw
- Kantal Bellows Heater
- Cover Material : SUS304
- Forced Conection
- 220/380VAC, 3-ph,12kw
- Kantal Bellows Heater
- Cover Material : SUS304
- Forced Conection
- 220/380VAC, 3-ph, 15kw
Fan
- Moter : 220/380VAC, 3h, 60Hz
- Drive Type : Magnedrive
- Moter : 220/380VAC, 3h, 60Hz
- Drive Type : Magnedrive
- Moter : 380VAC, 3h, 60Hz
- Drive Type : Magnedrive
Control
- Temp : PID Control (Deviation : ±1℃)
- Pressure : On/Off Control
(Deviation : ±5psi)
- Time : Timer
- Temp : PID Control (Deviation : ±1℃)
- Pressure : On/Off Control
(Deviation : ±5psi)
- Time : Timer
- Temp : PID Control (Deviation : ±3℃)
- Pressure : On/Off Control
(Deviation : ±15psi)
- Time : Timer
Cooling
- Industrial Water or Chiller
- Industrial Water or Chiller
- Use of Below 60℃
- Industrial Water or Chiller
- Use of Below 60℃
Vacuum
- N/A
- Rotary Vane Pump
- 1 x 10-2 torr
Option
- Touch Screen
- Recorder
- PC & Controller
- Touch Screen
- Recorder
- PC & Controller
Vessel
항온가압챔버 Autoclave for binding film & glass
- Material : SUS304 & SCM
- Max. Working : 300psi@100℃
- Working Zone : I.D : 300~820 mm
L.D : 500~1,300 mm
- Seal Type : O-ring
- Cover Type : Quick Closure Clamp
- N/A
- Touch Screen
- Recorder
- PC & Controller
* 기본사양 이외의 압력사항 및 조건은 기술영업 담당자와 상담 후 주문제작이 가능합니다.
15