This document provides an operator's manual for Alpha Series Skid Steer Loaders and Compact Track Loaders. It includes information on safety, controls, operation, transport, working operations, and maintenance. The manual covers machine models SR130, SR150, SR175, SR200, SR220, SR250, SV185, SV250, SV300, TR270, TR320, and TV380. It replaces the previous operator's manual with part number 84533037.
Case cx500 c tier iii crawler excavator service repair manualfsjefjskekmm
The document is a service manual section that provides specifications for the CX490C and CX500C excavator engine. It includes detailed specifications for the engine, cooling system, lubrication system, electrical system, starter, glow plug, and special tools. The engine is a Tier 3 compliant Isuzu 6UZ1 diesel with a displacement of 9.839L and maximum output of 270kW at 2000 RPM.
Case cx210 d crawler excavator service repair manualfsjefjskekmm
This document provides service information for the CX210D Crawler Excavator, including:
1) An overview of the engine specifications and systems such as cooling, fuel, electrical, and emissions control systems.
2) Descriptions of the engine components including the cylinder block, cylinder liner, piston, cylinder head, crankshaft, and EGR system.
3) Identification information for the engine number and static descriptions of key engine features.
Case cx210 c crawler excavator service repair manualdfujsjefjkskemm
This document is a service manual for a CX210C crawler excavator. It contains sections covering the engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms dippers and buckets, and the platform, cab, bodywork and decals. Each section contains multiple subsections that provide detailed instructions and part numbers for repair and maintenance of specific components. The introduction emphasizes the importance of qualified dealership personnel strictly following the procedures in the manual and using approved parts for any repair or maintenance work.
Case ih maxxum 150 trator service repair manualufjjsjekdkemme
This document is a service manual for Maxxum 135-150-165-180 tractors. It contains specifications, tightening torques, descriptions, troubleshooting procedures, and instructions for removing and installing components. The manual is divided into sections covering the engine, transmission, brakes, hydraulics, steering, electrical systems, and other components. It provides technicians with the information needed to service and repair these tractors.
Allison AT, MT, HT Series Operator's manual.pdfRolandasPetkus
This document is an operator's manual that provides information about Allison automatic transmissions, including the AT, MT, and HT series models. It describes the basic components and operation of Allison automatics, such as the torque converter and lockup clutch. It also covers shift selector positions, driving tips, power takeoff operation, care and maintenance procedures, and customer service information.
Caterpillar cat th414 c gc, th417c gc telehandler operator and maintenance ma...jdfjskekmdme
This document is an operation and maintenance manual for TH414C GC and TH417C GC telehandler models produced after specific serial numbers. It contains safety information, pre-operation checks, controls information, operating instructions, and maintenance procedures. The manual has sections covering general safety practices, inspections, controls, engine operation, loading and transport, approved attachments, capacity charts, and instructions for specific attachments. It is intended to be kept with the machine at all times for reference by operators.
Caterpillar cat th414 c gc, th417c gc telehandler operator and maintenance ma...fjjsekkdmme
This document is an operation and maintenance manual for JLG telehandlers models TH414C GC, TH417C GC. It contains safety information and instructions for pre-operation checks, operation, maintenance and repairs. The manual covers topics such as general safety practices, controls and indicators, emergency procedures, lubrication schedules and specifications. It provides guidance to operators to safely operate and maintain the telehandlers.
Caterpillar cat th414 c gc, th417c gc telehandler operator and maintenance ma...jfskekfsmemm
This document is an operation and maintenance manual for JLG telehandlers models TH414C GC, TH417C GC. It contains safety information and instructions for pre-operation checks, operation, maintenance and repairs. The manual covers hazards from electrical contact, tipping over, load falling, pinch points and proper procedures for lifting loads, traveling, parking and emergency situations. Maintenance schedules and lubrication instructions are also included.
Case cx500 c tier iii crawler excavator service repair manualfsjefjskekmm
The document is a service manual section that provides specifications for the CX490C and CX500C excavator engine. It includes detailed specifications for the engine, cooling system, lubrication system, electrical system, starter, glow plug, and special tools. The engine is a Tier 3 compliant Isuzu 6UZ1 diesel with a displacement of 9.839L and maximum output of 270kW at 2000 RPM.
Case cx210 d crawler excavator service repair manualfsjefjskekmm
This document provides service information for the CX210D Crawler Excavator, including:
1) An overview of the engine specifications and systems such as cooling, fuel, electrical, and emissions control systems.
2) Descriptions of the engine components including the cylinder block, cylinder liner, piston, cylinder head, crankshaft, and EGR system.
3) Identification information for the engine number and static descriptions of key engine features.
Case cx210 c crawler excavator service repair manualdfujsjefjkskemm
This document is a service manual for a CX210C crawler excavator. It contains sections covering the engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms dippers and buckets, and the platform, cab, bodywork and decals. Each section contains multiple subsections that provide detailed instructions and part numbers for repair and maintenance of specific components. The introduction emphasizes the importance of qualified dealership personnel strictly following the procedures in the manual and using approved parts for any repair or maintenance work.
Case ih maxxum 150 trator service repair manualufjjsjekdkemme
This document is a service manual for Maxxum 135-150-165-180 tractors. It contains specifications, tightening torques, descriptions, troubleshooting procedures, and instructions for removing and installing components. The manual is divided into sections covering the engine, transmission, brakes, hydraulics, steering, electrical systems, and other components. It provides technicians with the information needed to service and repair these tractors.
Allison AT, MT, HT Series Operator's manual.pdfRolandasPetkus
This document is an operator's manual that provides information about Allison automatic transmissions, including the AT, MT, and HT series models. It describes the basic components and operation of Allison automatics, such as the torque converter and lockup clutch. It also covers shift selector positions, driving tips, power takeoff operation, care and maintenance procedures, and customer service information.
Caterpillar cat th414 c gc, th417c gc telehandler operator and maintenance ma...jdfjskekmdme
This document is an operation and maintenance manual for TH414C GC and TH417C GC telehandler models produced after specific serial numbers. It contains safety information, pre-operation checks, controls information, operating instructions, and maintenance procedures. The manual has sections covering general safety practices, inspections, controls, engine operation, loading and transport, approved attachments, capacity charts, and instructions for specific attachments. It is intended to be kept with the machine at all times for reference by operators.
Caterpillar cat th414 c gc, th417c gc telehandler operator and maintenance ma...fjjsekkdmme
This document is an operation and maintenance manual for JLG telehandlers models TH414C GC, TH417C GC. It contains safety information and instructions for pre-operation checks, operation, maintenance and repairs. The manual covers topics such as general safety practices, controls and indicators, emergency procedures, lubrication schedules and specifications. It provides guidance to operators to safely operate and maintain the telehandlers.
Caterpillar cat th414 c gc, th417c gc telehandler operator and maintenance ma...jfskekfsmemm
This document is an operation and maintenance manual for JLG telehandlers models TH414C GC, TH417C GC. It contains safety information and instructions for pre-operation checks, operation, maintenance and repairs. The manual covers hazards from electrical contact, tipping over, load falling, pinch points and proper procedures for lifting loads, traveling, parking and emergency situations. Maintenance schedules and lubrication instructions are also included.
Volvo g710 b motor grader service repair manualfjjsekksekmm
The document provides instructions for removing and installing a clutch housing on a G700B motor grader. It describes removing components like the fuel tank, hoses, and upper driveshaft to access the clutch housing. The bearing support housing and clutch are then removed from the clutch housing. Instructions are provided for removing and installing the clutch assembly and related components. Finally, the document outlines reinstalling the clutch housing and torquing bolts to the specified values.
Volvo ec700 c ld ec700cld excavator service repair manualfjjsekksekmm
The document contains information about the power transmission system and track gearbox of an excavator. It describes how mechanical power from the engine is converted to hydraulic power which powers the travel motors, slew motor, and hydraulic cylinders. It also provides descriptions, illustrations and removal/installation instructions for the track gearbox, along with maintenance standards, troubleshooting tips, and precautions for operation.
Volvo ec700 c l ec700cl excavator service repair manualfjjsekksekmm
The document contains information about the power transmission system and track gearbox of an excavator. It describes how mechanical power from the engine is converted to hydraulic power and then back to mechanical power to operate functions like travel, slewing and attachments. It provides descriptions, illustrations and maintenance procedures for the track gearbox, including removing, installing, troubleshooting, specifications and precautions for operation. Lubrication oil type and filling procedures are also outlined.
Volvo ec700 b lc ec700blc excavator service repair manualfjjsekksekmm
The document contains information about the power transmission system and track gearbox of an excavator. It describes how mechanical power from the engine is converted to hydraulic power which powers the travel motors, slew motor, and hydraulic cylinders. It also provides descriptions, illustrations and removal/installation instructions for the track gearbox, along with maintenance standards, troubleshooting tips, and precautions for operation.
Volvo ec360 b nlc ec360bnlc excavator service repair manualfjjsekksekmm
This document provides service information for a demolition machine, including its components and measurements. It contains diagrams showing the location of major mechanical components. It then describes the demolition machine and includes a diagram highlighting added protective structures. Finally, it provides conversion tables for common units of measurement for length, area, volume, weight, pressure and other values.
Volvo ec210 c lr ec210clr excavator service repair manualfjjsekksekmm
The document provides information on the power transmission system of an excavator. It describes how mechanical power from the engine is converted to hydraulic power via pumps and then back to mechanical power via hydraulic motors and reduction gears to power travel, slewing, and attachment functions. It then focuses on the track gearbox, explaining its dual planetary gear configuration, port connections, components, torque flow, maintenance standards, and troubleshooting.
Volvo ec210 c ld ec210cld excavator service repair manualfjjsekksekmm
The document provides information on replacing the track unit and track gearbox cover of an excavator. It outlines 14 steps for replacing the track unit, including removing the track chain, sprocket, motor cover, hoses and fittings before lifting the track unit off with a hoist. It then describes 8 steps for replacing the track gearbox cover, which involves draining the oil, removing screws and separating the cover using set screws before cleaning and reapplying the surface.
Volvo ec210 b nlc ec210bnlc excavator service repair manualfjjsekksekmm
1) The document provides instructions for removing and installing the superstructure and various guards of an excavator.
2) Key steps include disconnecting hoses and dismantling parts before lifting the superstructure with a crane, as well as applying threadlock and following tightening specifications upon reinstallation.
3) Safety warnings are given to pay attention to footing and watch for heavy parts when removing or handling the superstructure and guards.
Volvo ec210 b lr ec210blr excavator service repair manualfjjsekksekmm
The document provides instructions for removing a counterweight from an excavator. It contains the following key details:
1. The counterweight must be lifted carefully as it is heavy, using certified lifting equipment rated for the weight.
2. Position the boom and bucket on the ground and engage the safety locking lever before removal.
3. Remove covers and plugs from the top of the counterweight and attach lifting cables to the lifting point.
4. Remove four bolts to detach the counterweight and lift it off the retaining pin onto a suitable support.
Volvo ec140 lc ec140 lc excavator service repair manualfjjsekksekmm
1. The document provides specifications for two excavator models, the EC140LC and EC140LCM, including dimensions of the undercarriage, track components, ground contact pressures for different track shoe widths, and other technical details.
2. The instructions describe the process for installing and removing the superstructure of an excavator, including lifting points, torque specifications for fasteners, and reconnecting hydraulic and electrical components.
3. Additional documents provide service information for repair and maintenance of excavator undercarriage components like idlers, including diagrams of parts, assembly and disassembly instructions, and specifications for lubrication and torque values.
Hitachi zaxis 230 excavator service repair manualfjjsekksekmm
This document contains safety information and instructions for operating an excavator safely. It discusses recognizing safety symbols and signals, following safety instructions, preparing for emergencies, wearing protective clothing, protecting against noise, inspecting the machine, general precautions for the cab, using handholds and steps carefully, adjusting the operator's seat, fastening the seat belt, moving and operating the machine safely, operating only from the operator's seat, jump starting safely, not allowing riders, providing signals for jobs with multiple machines, confirming the machine's travel direction, and driving the machine safely. Safety is emphasized throughout to prevent injury and damage.
Hitachi zaxis 225 usrlc excavator service repair manualfjjsekksekmm
This document contains sections from a service manual for an excavator. It includes sections on safety alerts, safety precautions, operating procedures, and technical specifications. The sections advise operators to wear protective equipment, inspect the machine daily, follow all safety instructions, secure seat belts, and only start the engine from the operator's seat. Operators are instructed to drive safely and watch out for bystanders when moving or operating the machine.
Hitachi zaxis 135 us 3 class hydraulic excavator service repair manualfjjsekksekmm
This document provides safety information and guidelines for machine operators. It describes various safety symbols and signal words that are used to indicate hazards. It emphasizes the importance of carefully reading and following all safety instructions in the manual. It provides tips for safe operation, such as inspecting the machine, wearing protective equipment, using handholds and steps carefully, and adjusting the operator's seat properly.
Case tr320 compact track loader operation manualfjjsekksekmm
This document is an operator's manual for Alpha Series skid steer loaders and compact track loaders. It provides information on safety, controls, operation, transport, working operations, and maintenance. The manual contains instructions on starting and stopping the machine, moving and steering, operating attachments, transporting, and basic maintenance procedures. Safety warnings and precautions are emphasized throughout regarding the safe operation and maintenance of the equipment.
Case sr200 skid steer loader operation manualfjjsekksekmm
This document is an operator's manual for Alpha Series skid steer loaders and compact track loaders. It provides information on safety, controls, operation, transport, working operations, and maintenance. The manual contains instructions on starting and stopping the machine, moving and steering, operating attachments, transporting, and basic maintenance procedures. Safety warnings and precautions are emphasized throughout regarding the safe operation and maintenance of the equipment.
Case 750 l tier 3 crawler dozer operator manualfjjsekksekmm
This document is an operator's manual for 750L and 850L Tier 3 Crawler Dozers. It provides information on machine components, safety and decals, instruments and controls, operating instructions, lubrication and maintenance schedules. The manual contains chapters covering general information, safety, instruments and controls, operating instructions, lubrication/fluids, and maintenance/adjustments. It provides guidance for proper operation and maintenance of the crawler dozers.
Bobcat 943 hydrostatic pump component service repair manual sn allfjjsekksekmm
The document provides instructions for disassembling and assembling a hydrostatic pump. It lists the key steps which include removing charge tubelines, replenishing valves, center bracket, and separating the pump housing. Individual internal parts are then removed, such as the coupler, pintle levers, splined gear, and high pressure valves. The rotating group and drive shaft can be accessed by removing the center section and snap ring from the rear housing. Safety precautions are outlined and proper torque specifications provided for reassembly.
Volvo sd116 dx single drum roller service repair manualfjjsekksekmm
The document provides information on servicing the steering system of a machine. It describes the components of the steering system, including the steering wheel, cylinders, control unit and pump. It provides instructions for replacing the adjustable steering column and checking and adjusting the steering pressure. It also describes procedures for removing and installing a steering cylinder.
Volvo sd110 single drum roller service repair manualfjjsekksekmm
The machine frame consists of a rear frame assembly, front frame assembly, and swivel frame connecting the two. The rear frame supports components like tanks and engines, while the front frame supports the drum assembly.
The drum has a smooth surface and transmits vibration to loosen material via an eccentric assembly powered by a hydraulic motor.
Removing the drum assembly involves disconnecting hoses, loosening mounting bolts, lifting out the assembly which weighs nearly 4 tons, and removing vibration and drive side mounts. Installing follows the reverse process.
Volvo sd77 f single drum roller service repair manualfjjsekksekmm
This document provides instructions for removing a hydraulic motor from a machine. It describes draining the oil from the rear axle, disconnecting electrical and hydraulic connections from the motor, and removing mounting bolts. Safety precautions are noted, including using lifting devices rated for the motor's weight. Reinstallation involves reversing these steps, with adjustments if needed, and testing operation after refilling fluids.
Volvo g710 b motor grader service repair manualfjjsekksekmm
The document provides instructions for removing and installing a clutch housing on a G700B motor grader. It describes removing components like the fuel tank, hoses, and upper driveshaft to access the clutch housing. The bearing support housing and clutch are then removed from the clutch housing. Instructions are provided for removing and installing the clutch assembly and related components. Finally, the document outlines reinstalling the clutch housing and torquing bolts to the specified values.
Volvo ec700 c ld ec700cld excavator service repair manualfjjsekksekmm
The document contains information about the power transmission system and track gearbox of an excavator. It describes how mechanical power from the engine is converted to hydraulic power which powers the travel motors, slew motor, and hydraulic cylinders. It also provides descriptions, illustrations and removal/installation instructions for the track gearbox, along with maintenance standards, troubleshooting tips, and precautions for operation.
Volvo ec700 c l ec700cl excavator service repair manualfjjsekksekmm
The document contains information about the power transmission system and track gearbox of an excavator. It describes how mechanical power from the engine is converted to hydraulic power and then back to mechanical power to operate functions like travel, slewing and attachments. It provides descriptions, illustrations and maintenance procedures for the track gearbox, including removing, installing, troubleshooting, specifications and precautions for operation. Lubrication oil type and filling procedures are also outlined.
Volvo ec700 b lc ec700blc excavator service repair manualfjjsekksekmm
The document contains information about the power transmission system and track gearbox of an excavator. It describes how mechanical power from the engine is converted to hydraulic power which powers the travel motors, slew motor, and hydraulic cylinders. It also provides descriptions, illustrations and removal/installation instructions for the track gearbox, along with maintenance standards, troubleshooting tips, and precautions for operation.
Volvo ec360 b nlc ec360bnlc excavator service repair manualfjjsekksekmm
This document provides service information for a demolition machine, including its components and measurements. It contains diagrams showing the location of major mechanical components. It then describes the demolition machine and includes a diagram highlighting added protective structures. Finally, it provides conversion tables for common units of measurement for length, area, volume, weight, pressure and other values.
Volvo ec210 c lr ec210clr excavator service repair manualfjjsekksekmm
The document provides information on the power transmission system of an excavator. It describes how mechanical power from the engine is converted to hydraulic power via pumps and then back to mechanical power via hydraulic motors and reduction gears to power travel, slewing, and attachment functions. It then focuses on the track gearbox, explaining its dual planetary gear configuration, port connections, components, torque flow, maintenance standards, and troubleshooting.
Volvo ec210 c ld ec210cld excavator service repair manualfjjsekksekmm
The document provides information on replacing the track unit and track gearbox cover of an excavator. It outlines 14 steps for replacing the track unit, including removing the track chain, sprocket, motor cover, hoses and fittings before lifting the track unit off with a hoist. It then describes 8 steps for replacing the track gearbox cover, which involves draining the oil, removing screws and separating the cover using set screws before cleaning and reapplying the surface.
Volvo ec210 b nlc ec210bnlc excavator service repair manualfjjsekksekmm
1) The document provides instructions for removing and installing the superstructure and various guards of an excavator.
2) Key steps include disconnecting hoses and dismantling parts before lifting the superstructure with a crane, as well as applying threadlock and following tightening specifications upon reinstallation.
3) Safety warnings are given to pay attention to footing and watch for heavy parts when removing or handling the superstructure and guards.
Volvo ec210 b lr ec210blr excavator service repair manualfjjsekksekmm
The document provides instructions for removing a counterweight from an excavator. It contains the following key details:
1. The counterweight must be lifted carefully as it is heavy, using certified lifting equipment rated for the weight.
2. Position the boom and bucket on the ground and engage the safety locking lever before removal.
3. Remove covers and plugs from the top of the counterweight and attach lifting cables to the lifting point.
4. Remove four bolts to detach the counterweight and lift it off the retaining pin onto a suitable support.
Volvo ec140 lc ec140 lc excavator service repair manualfjjsekksekmm
1. The document provides specifications for two excavator models, the EC140LC and EC140LCM, including dimensions of the undercarriage, track components, ground contact pressures for different track shoe widths, and other technical details.
2. The instructions describe the process for installing and removing the superstructure of an excavator, including lifting points, torque specifications for fasteners, and reconnecting hydraulic and electrical components.
3. Additional documents provide service information for repair and maintenance of excavator undercarriage components like idlers, including diagrams of parts, assembly and disassembly instructions, and specifications for lubrication and torque values.
Hitachi zaxis 230 excavator service repair manualfjjsekksekmm
This document contains safety information and instructions for operating an excavator safely. It discusses recognizing safety symbols and signals, following safety instructions, preparing for emergencies, wearing protective clothing, protecting against noise, inspecting the machine, general precautions for the cab, using handholds and steps carefully, adjusting the operator's seat, fastening the seat belt, moving and operating the machine safely, operating only from the operator's seat, jump starting safely, not allowing riders, providing signals for jobs with multiple machines, confirming the machine's travel direction, and driving the machine safely. Safety is emphasized throughout to prevent injury and damage.
Hitachi zaxis 225 usrlc excavator service repair manualfjjsekksekmm
This document contains sections from a service manual for an excavator. It includes sections on safety alerts, safety precautions, operating procedures, and technical specifications. The sections advise operators to wear protective equipment, inspect the machine daily, follow all safety instructions, secure seat belts, and only start the engine from the operator's seat. Operators are instructed to drive safely and watch out for bystanders when moving or operating the machine.
Hitachi zaxis 135 us 3 class hydraulic excavator service repair manualfjjsekksekmm
This document provides safety information and guidelines for machine operators. It describes various safety symbols and signal words that are used to indicate hazards. It emphasizes the importance of carefully reading and following all safety instructions in the manual. It provides tips for safe operation, such as inspecting the machine, wearing protective equipment, using handholds and steps carefully, and adjusting the operator's seat properly.
Case tr320 compact track loader operation manualfjjsekksekmm
This document is an operator's manual for Alpha Series skid steer loaders and compact track loaders. It provides information on safety, controls, operation, transport, working operations, and maintenance. The manual contains instructions on starting and stopping the machine, moving and steering, operating attachments, transporting, and basic maintenance procedures. Safety warnings and precautions are emphasized throughout regarding the safe operation and maintenance of the equipment.
Case sr200 skid steer loader operation manualfjjsekksekmm
This document is an operator's manual for Alpha Series skid steer loaders and compact track loaders. It provides information on safety, controls, operation, transport, working operations, and maintenance. The manual contains instructions on starting and stopping the machine, moving and steering, operating attachments, transporting, and basic maintenance procedures. Safety warnings and precautions are emphasized throughout regarding the safe operation and maintenance of the equipment.
Case 750 l tier 3 crawler dozer operator manualfjjsekksekmm
This document is an operator's manual for 750L and 850L Tier 3 Crawler Dozers. It provides information on machine components, safety and decals, instruments and controls, operating instructions, lubrication and maintenance schedules. The manual contains chapters covering general information, safety, instruments and controls, operating instructions, lubrication/fluids, and maintenance/adjustments. It provides guidance for proper operation and maintenance of the crawler dozers.
Bobcat 943 hydrostatic pump component service repair manual sn allfjjsekksekmm
The document provides instructions for disassembling and assembling a hydrostatic pump. It lists the key steps which include removing charge tubelines, replenishing valves, center bracket, and separating the pump housing. Individual internal parts are then removed, such as the coupler, pintle levers, splined gear, and high pressure valves. The rotating group and drive shaft can be accessed by removing the center section and snap ring from the rear housing. Safety precautions are outlined and proper torque specifications provided for reassembly.
Volvo sd116 dx single drum roller service repair manualfjjsekksekmm
The document provides information on servicing the steering system of a machine. It describes the components of the steering system, including the steering wheel, cylinders, control unit and pump. It provides instructions for replacing the adjustable steering column and checking and adjusting the steering pressure. It also describes procedures for removing and installing a steering cylinder.
Volvo sd110 single drum roller service repair manualfjjsekksekmm
The machine frame consists of a rear frame assembly, front frame assembly, and swivel frame connecting the two. The rear frame supports components like tanks and engines, while the front frame supports the drum assembly.
The drum has a smooth surface and transmits vibration to loosen material via an eccentric assembly powered by a hydraulic motor.
Removing the drum assembly involves disconnecting hoses, loosening mounting bolts, lifting out the assembly which weighs nearly 4 tons, and removing vibration and drive side mounts. Installing follows the reverse process.
Volvo sd77 f single drum roller service repair manualfjjsekksekmm
This document provides instructions for removing a hydraulic motor from a machine. It describes draining the oil from the rear axle, disconnecting electrical and hydraulic connections from the motor, and removing mounting bolts. Safety precautions are noted, including using lifting devices rated for the motor's weight. Reinstallation involves reversing these steps, with adjustments if needed, and testing operation after refilling fluids.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
1. Part number 84571609
4th edition English
December 2011
Replaces part number 84533037
OPERATOR’S MANUAL
SR130 SR200
SR150 SR220
SR175 SR250
SV185 SV250
SV300
Alpha Series Skid Steer Loader
TR270
TR320
TV380
Alpha Series Compact Track Loader
2. Contents
1 GENERAL INFORMATION
Note to the Owner .......................................................................... 1-1
Right, left, front and rear of the machine ................................................... 1-3
Identification numbers ...................................................................... 1-4
Machine components....................................................................... 1-7
2 SAFETY INFORMATION
Signal word definitions ..................................................................... 2-1
Safety rules................................................................................. 2-2
Decal information........................................................................... 2-3
Safety decals ............................................................................... 2-4
Utility safety................................................................................ 2-11
Operator precautions ...................................................................... 2-12
Proper entry and exit ...................................................................... 2-13
Starting and stopping precautions......................................................... 2-14
Seat belt precautions ...................................................................... 2-15
Specific precautions to this machine ...................................................... 2-16
Operating precautions ..................................................................... 2-17
Maintenance precautions.................................................................. 2-19
Fuel handling precautions ................................................................. 2-21
Burn prevention............................................................................ 2-21
Fire extinguisher........................................................................... 2-22
California proposition 65 warning.......................................................... 2-22
Hazardous chemicals...................................................................... 2-22
Transporting precautions .................................................................. 2-23
Electro-Magnetic Compatibility (EMC) .................................................... 2-23
Roll Over Protective Structure (ROPS).................................................... 2-24
Welding on the machine................................................................... 2-25
Mechanical lift arm lock procedure - radial lift machines .................................. 2-26
Mechanical lift arm lock procedure - vertical lift machines ................................ 2-27
No engine power - lift arm down control................................................... 2-28
Emergency exit ............................................................................ 2-29
3 CONTROLS/INSTRUMENTS
ACCESS TO OPERATOR'S PLATFORM
Door latches, cab....................................................................... 3-1
Window glass, cab ..................................................................... 3-2
Windshield wiper and washer controls ................................................. 3-2
Cab air louvers ......................................................................... 3-3
OPERATOR'S SEAT
Standard seat........................................................................... 3-4
Mechanical suspension seat ........................................................... 3-4
Air seat ................................................................................. 3-4
Seat belt ................................................................................ 3-5
3. MECHANICAL HYDRAULIC CONTROLS
Steering and travel ....................................................................... 3-6
Moving the machine .................................................................... 3-6
Turning the machine.................................................................... 3-7
Lift arm and bucket controls .............................................................. 3-8
Hand controls........................................................................... 3-8
Foot pedals ............................................................................. 3-9
ELECTRO HYDRAULIC CONTROLS
Control pattern overview ................................................................ 3-10
Standard H control pattern ............................................................ 3-10
Standard ISO control pattern .......................................................... 3-11
H control pattern steering and travel .................................................... 3-12
Left hand control lever................................................................. 3-12
Right hand control lever ............................................................... 3-12
Moving the machine ................................................................... 3-13
Turning the machine................................................................... 3-14
H control pattern lift arm and bucket controls ........................................... 3-15
Lift arm raise/lower control ............................................................ 3-15
Bucket curl/dump control .............................................................. 3-16
ISO control pattern steering and travel .................................................. 3-17
Moving the machine ................................................................... 3-17
Turning the machine................................................................... 3-18
Lift arm and bucket controls ........................................................... 3-20
CONTROL HANDLES
Switch configurations.................................................................. 3-21
Two speed function.................................................................... 3-26
AUXILIARY HYDRAULICS
Standard auxiliary hydraulics.......................................................... 3-27
High flow auxiliary hydraulics.......................................................... 3-28
Enhanced high flow auxiliary hydraulics............................................... 3-29
INSTRUMENT CLUSTER
Electronic instrument cluster (EIC) .................................................... 3-30
Advanced instrument cluster (AIC) .................................................... 3-35
Instrument cluster ..................................................................... 3-40
Left column switch identification....................................................... 3-52
ISO or H pattern control switch........................................................ 3-54
Machine lights ......................................................................... 3-54
Telematics ............................................................................. 3-54
4 OPERATING INSTRUCTIONS
COMMISSIONING THE UNIT
4. Operating Instructions .................................................................. 4-1
STARTING THE UNIT
Engine operation ....................................................................... 4-3
Throttle ................................................................................. 4-5
STOPPING THE UNIT
Parking the machine and stopping the engine ......................................... 4-6
Operating in extreme temperatures .................................................... 4-7
Booster battery procedure.............................................................. 4-8
MOVING THE UNIT
Machine operation...................................................................... 4-9
5 TRANSPORT OPERATIONS
SHIPPING TRANSPORT
Transporting the machine .............................................................. 5-1
RECOVERY TRANSPORT
Moving a disabled machine ............................................................ 5-5
6 WORKING OPERATIONS
GENERAL INFORMATION
Mechanical attachment mounting systems............................................. 6-1
Hydraulic attachment mounting systems ............................................... 6-4
Field operation.......................................................................... 6-6
7 MAINTENANCE
GENERAL INFORMATION
General safety before you service...................................................... 7-1
Lubrication analysis program........................................................... 7-3
Plastic and resin parts .................................................................. 7-3
Ecology and the environment .......................................................... 7-3
Tilting operator's compartment forward................................................. 7-4
Machine cleaning....................................................................... 7-8
Window removal and cleaning ......................................................... 7-9
Cab door removal and installation..................................................... 7-11
Battery safety - check and cleaning ................................................... 7-12
Fire extinguisher....................................................................... 7-14
Biodiesel fuel .......................................................................... 7-15
Engine hourmeter ..................................................................... 7-16
Wheels and tires....................................................................... 7-17
5. Fluids and lubricants .................................................................. 7-19
Lubrication and maintenance access.................................................. 7-20
Fuses and relays ...................................................................... 7-23
MAINTENANCE CHART
Maintenance Chart .................................................................... 7-25
Maintenance procedures
Clean tracks and components......................................................... 7-26
Engine and hydraulic coolers.......................................................... 7-27
Engine coolant reservoir level check .................................................. 7-27
Engine oil .............................................................................. 7-28
Lift arm, pivot points, coupler pins and cylinder pins .................................. 7-29
Hydraulic system ...................................................................... 7-30
Seat belt, lap bar and seat interlock operation check ................................. 7-32
Alternator and air conditioning compressor (if equipped) belt tension ................ 7-33
Cab intake filter........................................................................ 7-34
Roll Over Protective Structure (ROPS) mechanism and hardware check ............ 7-35
Engine oil and filter .................................................................... 7-35
Final drive - Drain fluid ................................................................ 7-37
Radiator coolant level check .......................................................... 7-38
Fuel filter............................................................................... 7-39
In line fuel filter ........................................................................ 7-39
Drive chain tension check ............................................................. 7-40
Primary fuel filter ...................................................................... 7-41
Hydraulic oil filter ...................................................................... 7-42
Final drive chain tank oil............................................................... 7-43
Air cleaner elements................................................................... 7-43
Hardware - loose or damaged......................................................... 7-45
Hydraulic fluid ......................................................................... 7-45
Radiator drain and flush ............................................................... 7-45
Final drive chain tank oil............................................................... 7-47
STORAGE
Storing the machine ............................................................... 7-48
8 TROUBLESHOOTING
FAULT CODE RESOLUTION
Error code index .................................................................... 8-1
9 SPECIFICATIONS
General specification ....................................................................... 9-1
Material weights ........................................................................... 9-23
Torque charts - Minimum tightening torques for normal assembly ....................... 9-24
Units of measure and conversion ......................................................... 9-29
6. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
7. 1 - GENERAL INFORMATION
1 - GENERAL INFORMATION
Note to the Owner
93106834 1
CNH AMERICA LLC
P.O. Box 9228
Wichita, Kansas
U.S.A
67277
DEALER'S STAMP OR CARD
This manual contains important information about the safe operation, adjustment and maintenance of your skid steer.
Refer to the detailed INDEX at the end of this manual for locating specific items about your machine. The skid steer
conforms to current safety regulations.
Use this manual as a guide. Your skid steer will remain a reliable working tool as long as it is kept in good working
condition and serviced properly.
This skid steer, with standard equipment and authorized attachments, is intended for above ground material handling.
Use only approved accessories and attachments designed for your machine.
1 - 1
8. 1 - GENERAL INFORMATION
This operators manual is to be stored in the manual compartment equipped on this machine. Make sure this manual
is complete and in good condition. Contact your dealer to obtain additional manuals. Contact your dealer for any
further information or assistance about your machine. Your dealer has corporation approved service parts. Your
dealer has technicians with special training that know the best methods or repair and maintenance for your skid steer.
Your Case dealer is available for any further information. They will also provide any after-sales service you may need,
and genuine Case spare parts, your guarantee of quality and match. Case Construction customer assistance is also
available. Call 1-866-54-CASE6 (1-866-542-2736) or email casecustomerassistance.na@cnh.com.
The information in this manual is provided on the basis of information that was available at the time that the manual
was written. Settings, procedures, part numbers, software, and other items can change. These changes can affect
the service that is given to the machine. Ensure that you have complete and current information from your dealer
before you start any machine operation.
Personal safety
This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all
safety messages that follow this symbol to avoid possible death or injury.
Throughout this manual and on machine decals, you will find the signal words DANGER, WARNING, and CAUTION
followed by special instructions. These precautions are intended for the personal safety of you and those working
with you.
DO NOT operate or permit anyone to operate or service this machine until you or the other persons have read and
understand the safety, operation, and maintenance instructions in this manual. Use only trained operators who have
demonstrated the ability to operate and service this machine correctly and safely. All persons who will be operating
this machine shall possess a valid local vehicle operating permit and/or other applicable local age work permit. The
information in this manual is provided on the basis of information that was available at the time that the manual was
written. Settings, procedures, part numbers, software and other items can change. These changes can affect the
service that is given to the machine. Ensure that you have complete and most current information from your dealer
before you start your machine operation.
DO NOT use this machine for any application or purpose other than those described in this manual. Consult an
authorized dealer on changes, additions or modifications that can be required for this machine to comply with various
country regulations and safety requirements. Unauthorized modifications will cause serious injury or death. Anyone
making such unauthorized modifications is responsible for the consequences.
NOTICE: The engine and fuel system on your machine is designed and built to government emissions standards.
Tampering by dealers, customers and operators is strictly prohibited by law. Failure to comply could result in gov-
ernment fines, rework charges invalid warranty, legal action and possible confiscation of the machine until rework to
original condition is completed. Engine service and or repairs must be done by a certified technician only!
1 - 2