This service manual provides instructions for servicing the engine and components of Axial-Flow combine models 5130, 6130, and 7130. The document covers removing and installing the engine, which involves disconnecting electrical and fluid connections, removing mounting hardware, and lifting the engine out of the machine. Safety precautions are provided to disengage machinery and avoid injury when servicing equipment.
CASE IH AXIAL-FLOW 6150 Tier 4B (final) Combine Service Repair Manual (PIN YJ...fujkemmdmd4e
This document is a service manual for Case IH Axial-Flow combines, models 5150, 6150, and 7150 that meet Tier 4B emissions standards. It contains sections covering the engine, transmission, axles, hydraulic and electrical systems, and other mechanical components of the combines. Safety information is provided regarding proper handling of fuels, fluids, and batteries.
CASE IH AXIAL-FLOW 5150 Tier 4B (final) Combine Service Repair Manual (PIN YJ...fujkemmdmd4e
This document is a service manual for Case IH Axial-Flow combines, models 5150, 6150, and 7150 that meet Tier 4B emissions standards. It contains sections covering the engine, transmission, axles, hydraulic and electrical systems, and other mechanical components of the combines. Safety information is provided regarding proper handling of fuels, oils and other materials, and battery recycling requirements.
CASE IH AXIAL-FLOW 7150 Tier 4B (final) Combine Service Repair Manual (PIN YJ...fujkemmdmd4e
This document is a service manual for Case IH Axial-Flow combines, models 5150, 6150, and 7150 that meet Tier 4B emissions standards. It contains sections covering the engine, transmission, axles, hydraulic and electrical systems, and other mechanical components of the combines. Safety information is provided regarding proper handling of fuels, oils and other materials, and battery recycling requirements.
CASE IH AXIAL-FLOW 7150 Tier 4B (final) Combine Service Repair Manual (PIN YJ...fjskekmdmdm1
This document is a service manual that provides technical specifications and repair instructions for Case IH Axial-Flow combines, including the 5150, 6150, and 7150 models that meet Tier 4B emissions standards. It contains detailed sections on the engine, transmission, axles, hydraulic and electrical systems, cab climate control, and other components. Repair procedures are organized by system and subsection with part numbers listed. The manual is intended to guide maintenance and repairs of these combines.
CASE IH AXIAL-FLOW 6150 Tier 4B (final) Combine Service Repair Manual (PIN YJ...fjskekmdmdm1
This document is a service manual that provides technical specifications and repair instructions for Case IH Axial-Flow combines, including the 5150, 6150, and 7150 models that meet Tier 4B emissions standards. It contains detailed sections on the engine, transmission, axles, hydraulic and electrical systems, cab climate control, and other components. Repair procedures are organized by system and subsection with part numbers listed. The manual is intended to guide maintenance and repairs of these combines.
CASE IH AXIAL-FLOW 5150 Tier 4B (final) Combine Service Repair Manual (PIN YJ...fjskekmdmdm1
This document is a service manual for Case IH Axial-Flow combines models 5150, 6150, and 7150 that meet Tier 4B emissions standards. It contains sections covering the engine, transmission, axles, hydraulic and electrical systems, and other mechanical components of the combines. Safety information is provided regarding proper handling of fuels, oils, and other materials.
Case ih axial flow 6150 tier 4 b (final) combine service repair manual instan...ufjjskekmdmm
This document is a service manual that provides technical specifications and repair instructions for Case IH Axial-Flow combines, including the 5150, 6150, and 7150 models that meet Tier 4B emissions standards. It contains detailed sections on the engine, transmission, axles, hydraulic and electrical systems, cab climate control, and other components. Repair procedures are organized by system and subsection with part numbers listed. The manual is intended to guide maintenance and repairs of these combines.
Case ih axial flow 7150 tier 4 b (final) combine service repair manual (pin y...fusjefjksefm
This document provides a service manual for Case IH Axial-Flow combines, including the 5150, 6150, and 7150 models that meet Tier 4B emissions standards. It contains sections covering the engine, transmission, axles, hydraulic and electrical systems, as well as the feeding, threshing, separating, residue handling, cleaning, and unloading systems of the combines. Safety information is also provided regarding personal safety practices, the environment, and battery recycling.
CASE IH AXIAL-FLOW 6150 Tier 4B (final) Combine Service Repair Manual (PIN YJ...fujkemmdmd4e
This document is a service manual for Case IH Axial-Flow combines, models 5150, 6150, and 7150 that meet Tier 4B emissions standards. It contains sections covering the engine, transmission, axles, hydraulic and electrical systems, and other mechanical components of the combines. Safety information is provided regarding proper handling of fuels, fluids, and batteries.
CASE IH AXIAL-FLOW 5150 Tier 4B (final) Combine Service Repair Manual (PIN YJ...fujkemmdmd4e
This document is a service manual for Case IH Axial-Flow combines, models 5150, 6150, and 7150 that meet Tier 4B emissions standards. It contains sections covering the engine, transmission, axles, hydraulic and electrical systems, and other mechanical components of the combines. Safety information is provided regarding proper handling of fuels, oils and other materials, and battery recycling requirements.
CASE IH AXIAL-FLOW 7150 Tier 4B (final) Combine Service Repair Manual (PIN YJ...fujkemmdmd4e
This document is a service manual for Case IH Axial-Flow combines, models 5150, 6150, and 7150 that meet Tier 4B emissions standards. It contains sections covering the engine, transmission, axles, hydraulic and electrical systems, and other mechanical components of the combines. Safety information is provided regarding proper handling of fuels, oils and other materials, and battery recycling requirements.
CASE IH AXIAL-FLOW 7150 Tier 4B (final) Combine Service Repair Manual (PIN YJ...fjskekmdmdm1
This document is a service manual that provides technical specifications and repair instructions for Case IH Axial-Flow combines, including the 5150, 6150, and 7150 models that meet Tier 4B emissions standards. It contains detailed sections on the engine, transmission, axles, hydraulic and electrical systems, cab climate control, and other components. Repair procedures are organized by system and subsection with part numbers listed. The manual is intended to guide maintenance and repairs of these combines.
CASE IH AXIAL-FLOW 6150 Tier 4B (final) Combine Service Repair Manual (PIN YJ...fjskekmdmdm1
This document is a service manual that provides technical specifications and repair instructions for Case IH Axial-Flow combines, including the 5150, 6150, and 7150 models that meet Tier 4B emissions standards. It contains detailed sections on the engine, transmission, axles, hydraulic and electrical systems, cab climate control, and other components. Repair procedures are organized by system and subsection with part numbers listed. The manual is intended to guide maintenance and repairs of these combines.
CASE IH AXIAL-FLOW 5150 Tier 4B (final) Combine Service Repair Manual (PIN YJ...fjskekmdmdm1
This document is a service manual for Case IH Axial-Flow combines models 5150, 6150, and 7150 that meet Tier 4B emissions standards. It contains sections covering the engine, transmission, axles, hydraulic and electrical systems, and other mechanical components of the combines. Safety information is provided regarding proper handling of fuels, oils, and other materials.
Case ih axial flow 6150 tier 4 b (final) combine service repair manual instan...ufjjskekmdmm
This document is a service manual that provides technical specifications and repair instructions for Case IH Axial-Flow combines, including the 5150, 6150, and 7150 models that meet Tier 4B emissions standards. It contains detailed sections on the engine, transmission, axles, hydraulic and electrical systems, cab climate control, and other components. Repair procedures are organized by system and subsection with part numbers listed. The manual is intended to guide maintenance and repairs of these combines.
Case ih axial flow 7150 tier 4 b (final) combine service repair manual (pin y...fusjefjksefm
This document provides a service manual for Case IH Axial-Flow combines, including the 5150, 6150, and 7150 models that meet Tier 4B emissions standards. It contains sections covering the engine, transmission, axles, hydraulic and electrical systems, as well as the feeding, threshing, separating, residue handling, cleaning, and unloading systems of the combines. Safety information is also provided regarding personal safety practices, the environment, and battery recycling.
Case ih axial flow 7150 tier 4 b (final) combine service repair manual (pin y...fujsjfjskekemmem
This document provides a service manual for Case IH Axial-Flow combines, including the 5150, 6150, and 7150 models that meet Tier 4B emissions standards. It contains sections covering the engine, transmission, axles, hydraulic and electrical systems, as well as the feeding, threshing, separating, residue handling, cleaning, and unloading systems of the combines. Safety information is also provided regarding personal safety practices, the environment, and battery recycling.
Case ih axial flow 6150 tier 4 b (final) combine service repair manual (pin y...fjkseksmefmm
This document provides a service manual for Case IH Axial-Flow combines, including the 5150, 6150, and 7150 models that meet Tier 4B emissions standards. It contains sections covering the engine, transmission, axles, hydraulic and electrical systems, as well as the feeding, threshing, separating, residue handling, cleaning, and unloading systems of the combines. Safety information is also provided regarding personal safety practices, the environment, and battery recycling.
Case ih axial flow 5150 tier 4 b (final) combine service repair manual instan...ufjjskekmdmm
This document is a service manual that provides technical specifications and repair instructions for Case IH Axial-Flow combines, including the 5150, 6150, and 7150 models that meet Tier 4B emissions standards. It contains detailed sections on the engine, transmission, axles, hydraulic and electrical systems, cab climate control, and other components. Repair procedures are organized by system and subsection with part numbers listed. The manual is intended to guide maintenance and repairs of these combines.
Case ih axial flow 7150 tier 4 b (final) combine service repair manual (pin y...fjskekertkskemm
This document is a service manual that provides technical specifications and repair instructions for Case IH Axial-Flow combines, including the 5150, 6150, and 7150 models that meet Tier 4B emissions standards. It contains detailed sections on the engine, transmission, axles, hydraulic and electrical systems, cab climate control, and other components. Repair procedures are organized by system and subsection with part numbers listed. The manual is intended to guide maintenance and repairs of these combines.
Case ih axial flow 5150 tier 4 b (final) combine service repair manual (pin y...fujsjefjkskeksmem
This document provides a service manual for Case IH Axial-Flow combines, including the 5150, 6150, and 7150 models that meet Tier 4B emissions standards. It contains sections covering the engine, transmission, axles, hydraulic and electrical systems, as well as the feeding, threshing, separating, residue handling, cleaning, and unloading components of the combines. Safety information is also provided regarding personal safety practices, the environment, and battery recycling.
Case ih axial flow 7150 tier 4 b (final) combine service repair manual instan...ufjjskekemem
This document is a service manual that provides technical specifications and repair instructions for Case IH Axial-Flow combines, including the 5150, 6150, and 7150 models that meet Tier 4B emissions standards. It contains detailed sections on the engine, transmission, axles, hydraulic and electrical systems, cab climate control, and other components. Repair procedures are organized by system and subsection with part numbers listed. The manual is intended to guide maintenance and repairs of these combines.
Case ih axial flow 6150 tier 4 b (final) combine service repair manual (pin y...fjjsfkskemem
This document provides a service manual for Case IH Axial-Flow combines, including the 5150, 6150, and 7150 models that meet Tier 4B emissions standards. It contains sections covering the engine, transmission, axles, hydraulic and electrical systems, as well as the feeding, threshing, separating, residue handling, cleaning, and unloading systems of the combines. Safety information is also provided regarding working on the machines, personal protective equipment, and proper handling of fluids, batteries, and emissions equipment.
Case ih axial flow 5150 tier 4 b (final) combine service repair manual (pin y...fisekksemm
This document provides a service manual for Case IH Axial-Flow combines, including the 5150, 6150, and 7150 models that meet Tier 4B emissions standards. It contains sections covering the engine, transmission, axles, hydraulic and electrical systems, as well as the feeding, threshing, separating, residue handling, cleaning, and unloading systems of the combines. Safety information is also provided regarding working on the machines, personal protective equipment, and proper handling of fluids, batteries and emissions equipment.
Iveco F4GE06 ENGINE Service Repair Manual.pdfmbk336997
This document provides information about the fuel injection system for NEF engines. It describes the mechanical rotary pump injection system which includes a priming pump, fuel filter, feed pump, and injectors. The priming pump draws fuel from the tank and sends it through the filter to the feed pump. The feed pump then increases the fuel pressure and delivers it to the injectors through delivery pipes. Fuel is then recovered from the injectors and returned to the tank.
Iveco F4GE04 ENGINE Service Repair Manual.pdfmbk336997
This document provides information about the fuel injection system for NEF engines. It describes the mechanical rotary pump injection system which includes a priming pump, fuel filter, feed pump, and injectors. The priming pump draws fuel from the tank and sends it through the filter to the feed pump. The feed pump then increases the fuel pressure and delivers it to the injectors through delivery pipes. Fuel is then recovered from the injectors and returned to the tank.
The document provides instructions for servicing components of a Caterpillar D8T track-type tractor powered by a C15 engine. It includes procedures for removing and installing various parts, including the front cover, vibration damper, crankshaft front seal, and front gear group. The instructions note to keep parts clean, provide lists of required tools, and describe assembly and disassembly steps with accompanying illustrations. Safety notices are included to warn against contaminants and turning the crankshaft while components are removed.
The document provides instructions for removing and installing a flywheel housing on a Caterpillar 740B Ejector Articulated Truck powered by a C15 engine. The removal procedure involves removing bolts and other components to detach the housing. For installation, the procedure describes cleaning parts, applying sealant, positioning seals and gears, and torquing bolts to specified values. Additional components like the rear power take-off must be removed before and reinstalled after the flywheel housing job.
The document provides disassembly instructions for the output transfer gears of a 740B articulated truck. It lists 50 steps to completely disassemble the output transfer gears unit. The steps include removing housing components, planetary gears, shafts, seals, and other parts. Various tools are required, and precautions are mentioned regarding weights of parts to be lifted and installed during disassembly.
This document provides instructions for removing and installing a cylinder head on a Caterpillar C15 engine:
1. To remove the cylinder head, disconnect hoses and sensors, remove bolts, and lift off the head using a lifting device due to its heavy weight of around 518 pounds.
2. To install the cylinder head, begin by installing gaskets and seals, then place the head on dowel pins and bolt it down evenly in a sequence using specific torque values. Reconnect all hoses and sensors.
3. The document also describes removing the camshaft by using support tools to maneuver it out of position while avoiding damage to surfaces. Proper alignment and installation of support tools is required for
The document provides instructions for removing and disassembling the transmission from a 414E Backhoe Loader. It lists the required tools and gives step-by-step details on disconnecting wiring harnesses, hoses, and mounting hardware. The transmission is then removed and its major components are disassembled, including removing gears, shafts, seals, and other internal parts. Detailed illustrations accompany each step.
The document provides instructions for removing and installing a flywheel and crankshaft rear seal on a Caterpillar 320E excavator. The removal procedure involves using guide studs and lifting equipment to remove the flywheel, then inspecting and possibly replacing the flywheel ring gear. The installation procedure specifies cleaning and heating the ring gear, positioning the flywheel with lifting equipment and guide studs, and tightening bolts to the specified torque. Removing the crankshaft rear seal involves using Torx sockets to remove screws from the seal assembly, which is then discarded.
The document provides instructions for removing and installing a flywheel and crankshaft rear seal on a Caterpillar 320E excavator. The removal procedure involves using guide studs and lifting tools to remove the flywheel. The crankshaft rear seal assembly is removed by taking out Torx screws. The installation procedure specifies cleaning parts and using a lifting device and guide studs to position the flywheel, and installing the crankshaft rear seal assembly with Torx screws.
Caterpillar Cat 320D L Excavator (Prefix MGG) Service Repair Manual (MGG00001...mbk336997
This document provides instructions for removing and installing the crankshaft pulley on a Caterpillar C6.4 engine. The removal procedure involves using a puller tool to remove the pulley from the crankshaft. For installation, the pulley is pressed back onto the crankshaft using a press and ensuring it is properly aligned. Safety precautions are provided to keep parts clean and avoid damage. Tools required are listed.
Caterpillar Cat 320D L Excavator (Prefix A8F) Service Repair Manual (A8F00001...mbk336997
The document provides instructions for removing and installing the idler gear in the front gear group of a Caterpillar C6.4 engine. It lists the required tools which include an idler shaft puller and driver group. The procedure involves removing the front housing, then using the puller tool to remove the idler gear shaft from the front housing.
This document provides instructions for removing and installing the crankshaft pulley on a Caterpillar C6.4 engine. The removal procedure involves using a puller tool to remove the pulley from the crankshaft. For installation, the pulley is pressed back onto the crankshaft using a press and ensuring it is properly aligned. Safety precautions are provided to keep parts clean and wear protective gloves when handling hot parts.
The document provides instructions for removing and installing the idler gear in the front gear group of a Caterpillar C6.4 engine. It lists the required tools which include an idler shaft puller and driver group. The procedure involves removing the front housing, then using the puller tool to remove the idler gear shaft from the front housing.
Caterpillar Cat 306E2 Mini Hydraulic Excavator (Prefix E2W) Service Repair Ma...mbk336997
The document provides instructions for removing the fuel injection pump from a Caterpillar 306E2 Mini Hydraulic Excavator. The procedure involves turning off the fuel and battery, disconnecting electrical and fuel lines from the pump, and removing mounting bolts. Gasket shims and studs from the cylinder block housing are also removed. Cleanliness of the pump and mounting area is emphasized.
More Related Content
Similar to CASE IH AXIAL-FLOW 7130 Combine Service Repair Manual (PIN YDG009296 and above).pdf
Case ih axial flow 7150 tier 4 b (final) combine service repair manual (pin y...fujsjfjskekemmem
This document provides a service manual for Case IH Axial-Flow combines, including the 5150, 6150, and 7150 models that meet Tier 4B emissions standards. It contains sections covering the engine, transmission, axles, hydraulic and electrical systems, as well as the feeding, threshing, separating, residue handling, cleaning, and unloading systems of the combines. Safety information is also provided regarding personal safety practices, the environment, and battery recycling.
Case ih axial flow 6150 tier 4 b (final) combine service repair manual (pin y...fjkseksmefmm
This document provides a service manual for Case IH Axial-Flow combines, including the 5150, 6150, and 7150 models that meet Tier 4B emissions standards. It contains sections covering the engine, transmission, axles, hydraulic and electrical systems, as well as the feeding, threshing, separating, residue handling, cleaning, and unloading systems of the combines. Safety information is also provided regarding personal safety practices, the environment, and battery recycling.
Case ih axial flow 5150 tier 4 b (final) combine service repair manual instan...ufjjskekmdmm
This document is a service manual that provides technical specifications and repair instructions for Case IH Axial-Flow combines, including the 5150, 6150, and 7150 models that meet Tier 4B emissions standards. It contains detailed sections on the engine, transmission, axles, hydraulic and electrical systems, cab climate control, and other components. Repair procedures are organized by system and subsection with part numbers listed. The manual is intended to guide maintenance and repairs of these combines.
Case ih axial flow 7150 tier 4 b (final) combine service repair manual (pin y...fjskekertkskemm
This document is a service manual that provides technical specifications and repair instructions for Case IH Axial-Flow combines, including the 5150, 6150, and 7150 models that meet Tier 4B emissions standards. It contains detailed sections on the engine, transmission, axles, hydraulic and electrical systems, cab climate control, and other components. Repair procedures are organized by system and subsection with part numbers listed. The manual is intended to guide maintenance and repairs of these combines.
Case ih axial flow 5150 tier 4 b (final) combine service repair manual (pin y...fujsjefjkskeksmem
This document provides a service manual for Case IH Axial-Flow combines, including the 5150, 6150, and 7150 models that meet Tier 4B emissions standards. It contains sections covering the engine, transmission, axles, hydraulic and electrical systems, as well as the feeding, threshing, separating, residue handling, cleaning, and unloading components of the combines. Safety information is also provided regarding personal safety practices, the environment, and battery recycling.
Case ih axial flow 7150 tier 4 b (final) combine service repair manual instan...ufjjskekemem
This document is a service manual that provides technical specifications and repair instructions for Case IH Axial-Flow combines, including the 5150, 6150, and 7150 models that meet Tier 4B emissions standards. It contains detailed sections on the engine, transmission, axles, hydraulic and electrical systems, cab climate control, and other components. Repair procedures are organized by system and subsection with part numbers listed. The manual is intended to guide maintenance and repairs of these combines.
Case ih axial flow 6150 tier 4 b (final) combine service repair manual (pin y...fjjsfkskemem
This document provides a service manual for Case IH Axial-Flow combines, including the 5150, 6150, and 7150 models that meet Tier 4B emissions standards. It contains sections covering the engine, transmission, axles, hydraulic and electrical systems, as well as the feeding, threshing, separating, residue handling, cleaning, and unloading systems of the combines. Safety information is also provided regarding working on the machines, personal protective equipment, and proper handling of fluids, batteries, and emissions equipment.
Case ih axial flow 5150 tier 4 b (final) combine service repair manual (pin y...fisekksemm
This document provides a service manual for Case IH Axial-Flow combines, including the 5150, 6150, and 7150 models that meet Tier 4B emissions standards. It contains sections covering the engine, transmission, axles, hydraulic and electrical systems, as well as the feeding, threshing, separating, residue handling, cleaning, and unloading systems of the combines. Safety information is also provided regarding working on the machines, personal protective equipment, and proper handling of fluids, batteries and emissions equipment.
Similar to CASE IH AXIAL-FLOW 7130 Combine Service Repair Manual (PIN YDG009296 and above).pdf (8)
Iveco F4GE06 ENGINE Service Repair Manual.pdfmbk336997
This document provides information about the fuel injection system for NEF engines. It describes the mechanical rotary pump injection system which includes a priming pump, fuel filter, feed pump, and injectors. The priming pump draws fuel from the tank and sends it through the filter to the feed pump. The feed pump then increases the fuel pressure and delivers it to the injectors through delivery pipes. Fuel is then recovered from the injectors and returned to the tank.
Iveco F4GE04 ENGINE Service Repair Manual.pdfmbk336997
This document provides information about the fuel injection system for NEF engines. It describes the mechanical rotary pump injection system which includes a priming pump, fuel filter, feed pump, and injectors. The priming pump draws fuel from the tank and sends it through the filter to the feed pump. The feed pump then increases the fuel pressure and delivers it to the injectors through delivery pipes. Fuel is then recovered from the injectors and returned to the tank.
The document provides instructions for servicing components of a Caterpillar D8T track-type tractor powered by a C15 engine. It includes procedures for removing and installing various parts, including the front cover, vibration damper, crankshaft front seal, and front gear group. The instructions note to keep parts clean, provide lists of required tools, and describe assembly and disassembly steps with accompanying illustrations. Safety notices are included to warn against contaminants and turning the crankshaft while components are removed.
The document provides instructions for removing and installing a flywheel housing on a Caterpillar 740B Ejector Articulated Truck powered by a C15 engine. The removal procedure involves removing bolts and other components to detach the housing. For installation, the procedure describes cleaning parts, applying sealant, positioning seals and gears, and torquing bolts to specified values. Additional components like the rear power take-off must be removed before and reinstalled after the flywheel housing job.
The document provides disassembly instructions for the output transfer gears of a 740B articulated truck. It lists 50 steps to completely disassemble the output transfer gears unit. The steps include removing housing components, planetary gears, shafts, seals, and other parts. Various tools are required, and precautions are mentioned regarding weights of parts to be lifted and installed during disassembly.
This document provides instructions for removing and installing a cylinder head on a Caterpillar C15 engine:
1. To remove the cylinder head, disconnect hoses and sensors, remove bolts, and lift off the head using a lifting device due to its heavy weight of around 518 pounds.
2. To install the cylinder head, begin by installing gaskets and seals, then place the head on dowel pins and bolt it down evenly in a sequence using specific torque values. Reconnect all hoses and sensors.
3. The document also describes removing the camshaft by using support tools to maneuver it out of position while avoiding damage to surfaces. Proper alignment and installation of support tools is required for
The document provides instructions for removing and disassembling the transmission from a 414E Backhoe Loader. It lists the required tools and gives step-by-step details on disconnecting wiring harnesses, hoses, and mounting hardware. The transmission is then removed and its major components are disassembled, including removing gears, shafts, seals, and other internal parts. Detailed illustrations accompany each step.
The document provides instructions for removing and installing a flywheel and crankshaft rear seal on a Caterpillar 320E excavator. The removal procedure involves using guide studs and lifting equipment to remove the flywheel, then inspecting and possibly replacing the flywheel ring gear. The installation procedure specifies cleaning and heating the ring gear, positioning the flywheel with lifting equipment and guide studs, and tightening bolts to the specified torque. Removing the crankshaft rear seal involves using Torx sockets to remove screws from the seal assembly, which is then discarded.
The document provides instructions for removing and installing a flywheel and crankshaft rear seal on a Caterpillar 320E excavator. The removal procedure involves using guide studs and lifting tools to remove the flywheel. The crankshaft rear seal assembly is removed by taking out Torx screws. The installation procedure specifies cleaning parts and using a lifting device and guide studs to position the flywheel, and installing the crankshaft rear seal assembly with Torx screws.
Caterpillar Cat 320D L Excavator (Prefix MGG) Service Repair Manual (MGG00001...mbk336997
This document provides instructions for removing and installing the crankshaft pulley on a Caterpillar C6.4 engine. The removal procedure involves using a puller tool to remove the pulley from the crankshaft. For installation, the pulley is pressed back onto the crankshaft using a press and ensuring it is properly aligned. Safety precautions are provided to keep parts clean and avoid damage. Tools required are listed.
Caterpillar Cat 320D L Excavator (Prefix A8F) Service Repair Manual (A8F00001...mbk336997
The document provides instructions for removing and installing the idler gear in the front gear group of a Caterpillar C6.4 engine. It lists the required tools which include an idler shaft puller and driver group. The procedure involves removing the front housing, then using the puller tool to remove the idler gear shaft from the front housing.
This document provides instructions for removing and installing the crankshaft pulley on a Caterpillar C6.4 engine. The removal procedure involves using a puller tool to remove the pulley from the crankshaft. For installation, the pulley is pressed back onto the crankshaft using a press and ensuring it is properly aligned. Safety precautions are provided to keep parts clean and wear protective gloves when handling hot parts.
The document provides instructions for removing and installing the idler gear in the front gear group of a Caterpillar C6.4 engine. It lists the required tools which include an idler shaft puller and driver group. The procedure involves removing the front housing, then using the puller tool to remove the idler gear shaft from the front housing.
Caterpillar Cat 306E2 Mini Hydraulic Excavator (Prefix E2W) Service Repair Ma...mbk336997
The document provides instructions for removing the fuel injection pump from a Caterpillar 306E2 Mini Hydraulic Excavator. The procedure involves turning off the fuel and battery, disconnecting electrical and fuel lines from the pump, and removing mounting bolts. Gasket shims and studs from the cylinder block housing are also removed. Cleanliness of the pump and mounting area is emphasized.
Caterpillar Cat 306E Mini Hydraulic Excavator (Prefix FHL) Service Repair Man...mbk336997
This document provides instructions for disassembling and assembling components of a Caterpillar C2.6 engine, including removing and installing the camshaft, camshaft gear, engine oil pan, pistons, connecting rods, and disassembling the pistons and connecting rods. The procedures include lists of required tools and step-by-step instructions with illustrations for each component. Safety notices are included to take precautions when handling parts and fluids.
Caterpillar Cat 305E2CR Mini Hydraulic Excavator (Prefix R5C) Service Repair ...mbk336997
The document provides instructions for removing and installing several engine components on a Caterpillar 305E2CR mini hydraulic excavator including:
- The flywheel, which must be removed using lifting equipment due to its weight of approximately 55 pounds.
- The crankshaft rear seal carrier, which is removed after draining fluids and involves removing bolts and seals.
- The flywheel housing, which is removed after other components and involves removing brackets and bolts.
The document provides instructions for removing and installing various engine components on a Caterpillar 299D compact track loader, including:
- Fuel injection pump: Remove cover, gears, and pump. Install in reverse order.
- Electronic unit injectors: Remove overflow pipe, clamp, and injector. Install new seals and injectors in reverse order.
- Turbocharger: Remove nuts and bolts, then turbocharger. Apply anti-seize and install in reverse.
- Mass air flow sensor: Disconnect harness, hoses, and remove sensor. Install in reverse order and tighten screws.
- Exhaust gas recirculation valve: Disconnect connections and remove
1. The document provides disassembly and assembly instructions for removing and installing the piston pump on a 289C Compact Track Loader.
2. The removal procedure involves disconnecting hoses and harness assemblies, removing mounting bolts, and using lifting tools to remove the pump.
3. The disassembly procedure details dismantling the various internal components of the pump including valves, cartridges, seals, and bearings.
- The document provides instructions for removing and installing various engine components on a 272D XHP Skid Steer Loader, including the fuel injection pump, electronic unit injectors, turbocharger, mass air flow sensor, and exhaust gas recirculation valve.
- The procedures note required tools and safety precautions, and include illustrations showing component locations and part numbers.
- Technicians are instructed to remove parts in the specified order, clean and inspect components, apply anti-seize as needed, and install new seals or gaskets before reinstalling components in the reverse order of removal.
This document provides instructions for removing and installing components on a Caterpillar 3044C engine, including:
- Removing and installing the fuel injection pump, following several steps like loosening covers, marking gears, and using a puller tool.
- Removing and installing the turbocharger, which involves disconnecting tubes, removing nuts and bolts, and cleaning mating surfaces.
- Procedures for removing and installing the exhaust manifold and inlet manifold, noting the need to allow components to cool, keep parts clean, and tighten bolts in a specific pattern and torque.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
9. INTRODUCTION
Safety rules Ecology and the Environment
AXIAL-FLOW 5130, AXIAL-FLOW 6130, AXIAL-FLOW 7130
Soil, air, and water are vital factors of agriculture and life in general. When legislation does not yet rule the treatment
of some of the substances which are required by advanced technology, common sense should govern the use and
disposal of products of a chemical and petrochemical nature.
NOTICE: The following are recommendations which may be of assistance:
• Become acquainted with and ensure that you understand the relative legislation applicable to your country.
• Where no legislation exists, obtain information from suppliers of oils, filters, batteries, fuels, antifreeze, cleaning
agents, etc., with regard to their effect on man and nature and how to safely store, use and dispose of these sub-
stances.
• Agricultural consultants will, in many cases, be able to help you as well.
HELPFUL HINTS
• Avoid filling tanks using cans or inappropriate pressurized fuel delivery systems which may cause considerable
spillage.
• In general, avoid skin contact with all fuels, oils, acids, solvents, etc. Most of them contain substances which may
be harmful to your health.
• Modern oils contain additives. Do not burn contaminated fuels and or waste oils in ordinary heating systems.
• Avoid spillage when draining off used engine coolant mixtures, engine, gearbox and hydraulic oils, brake fluids, etc.
Do not mix drained brake fluids or fuels with lubricants. Store them safely until they can be disposed of in a proper
way to comply with local legislation and available resources.
• Modern coolant mixtures, i.e. antifreeze and other additives, should be replaced every two years. They should not
be allowed to get into the soil but should be collected and disposed of properly.
• Do not open the air-conditioning system yourself. It contains gases which should not be released into the atmos-
phere. Your CASE IH AGRICULTURE dealer or air conditioning specialist has a special extractor for this purpose
and will have to recharge the system properly.
• Repair any leaks or defects in the engine cooling or hydraulic system immediately.
• Do not increase the pressure in a pressurized circuit as this may lead to a component failure.
• Protect hoses during welding as penetrating weld splatter may burn a hole or weaken them, allowing the loss of
oils, coolant, etc.
47506838 04/04/2013
6
10. INTRODUCTION
Safety rules - Personal safety
AXIAL-FLOW 5130, AXIAL-FLOW 6130, AXIAL-FLOW 7130
Carefully study these precautions, and those included in the external attachment operators
manual, and insist that they be followed by those working with and for you.
1. Thoroughly read and understand this manual and the attachment Operator’s Manual before operating this or any
other equipment.
2. Be sure all people and pets are clear of the machine before starting. Sound the horn, if equipped, three times
before starting engine.
3. Only the operator should be on the machine when in operation. Never allow anyone to climb on to the machine
while it is in motion. If the machine is equipped with an Instructors Seat, this must only be used for training
purposes. Passengers must not be allowed to use the Instructors Seat.
4. Keep all shields in place. Never work around the machine or any of the attachments while wearing loose clothing
that might catch on moving parts.
5. Observe the following precautions whenever lubricating the machine or making adjustments.
• Disengage all clutching levers or switches.
• Lower the attachment, if equipped, to the ground or raise the attachment completely and engage the
cylinder safety locks. Completing these actions will prevent the attachment from lowering unexpectedly.
• Engage the parking brake.
• Shut off the engine and remove the key.
• Wait for all machine movement to stop before leaving the operators platform.
6. Always keep the machine in gear while travelling downhill.
7. The machine should always be equipped with sufficient front or rear axle weight for safe operation.
8. Under some field conditions, more weight may be required at the front or rear axle for adequate stability. This is
especially important when operating in hilly conditions or/when using heavy attachments.
9. Always lower the attachment, shut off the engine, set the parking brake, engage the transmission gears, remove
the key and wait for all machine movement to stop before leaving the operators platform.
10. If the attachment or machine should become obstructed or plugged; set the parking brake, shut off the engine
and remove the key, engage the transmission gears, wait for all machine or attachment motion to come to a stop,
before leaving the operators platform to removing the obstruction or plug.
11. Never disconnect or make any adjustments to the hydraulic system unless the machine and/or the attachment is
lowered to the ground or the safety lock(s) is in the engaged position.
12. Use of the flashing lights is highly recommended when operating on a public road.
13. When transporting on a road or highway, use accessory lights and devices for adequate warning to the opera-
tors of other vehicles. In this regard, check local government regulations. Various safety lights and devices are
available from your CASE IH AGRICULTURE dealer.
14. Practice safety 365 days a year.
15. Keep all your equipment in safe operating condition.
16. Keep all guards and safety devices in place.
17. Always set the parking brake, shut off the engine and remove the key, engage the transmission gears, wait for all
machine or attachment motion to come to a stop, before leaving the operators platform to service the machine
and attachment.
18. Remember: A careful operator is the best insurance against an accident.
19. Extreme care should be taken in keeping hands and clothing away from moving parts.
47506838 04/04/2013
7
12. Engine - Engine and crankcase
Engine - Remove
AXIAL-FLOW 5130
CAUTION
Unexpected machine movement!
1. Disengage all drives.
2. Engage parking brake.
3. Lower all attachments to the ground, or raise and engage all safety locks.
4. Shut off engine.
5. Remove key from key switch.
6. Switch off battery key, if installed.
7. Wait for all machine movement to stop.
Failure to comply could result in minor or moderate injury.
C0038A
Prior operation:
Battery - Remove (55.302)
Prior operation:
Engine - Drain fluid (10.001)
Prior operation:
Engine cooling system - Drain fluid (10.400).
Prior operation:
Deaeration tank - Remove (10.400).
Prior operation:
Engine hood - Remove (90.105)
Prior operation:
Connection tube from filter to muffler - Remove (10.202) .
Prior operation:
Selective Catalytic Reduction (SCR) muffler and catalyst - Remove (10.500)
Prior operation:
Exhaust pipes - Remove (10.254)
Prior operation:
Air cleaner connection between filter and engine - Remove (10.202)
Prior operation:
Aftercooler air supply and return lines - Remove return air tube from cooler to intake manifold (10.310)
Prior operation:
Aftercooler air supply and return lines - Remove air supply tube from turbocharger to lower cooler box (10.310)
Prior operation:
Radiator coolant tubes - Remove (10.400)
Prior operation:
Fan and drive - Remove (10.414)
Prior operation:
Engine starter - Remove (55.201)
Prior operation:
Alternator - Remove (55.301)
Prior operation:
Air-conditioning compressor - Remove (50.200)
Prior operation:
Diesel Exhaust Fluid (DEF)/AdBlue® lines - Remove (10.500)
Prior operation:
Engine - Remove engine oil drain line and drain valve (10.001)
47506838 04/04/2013
10.1 [10.001] / 3
13. Engine - Engine and crankcase
1. Park machine on level surface and chock front and
rear tires.
NH12AF001411A 1
2. Swing the unload tube outward to gain engine re-
moval access.
NH12AF00625A 2
NOTE: Retain all hardware for installation of the engine.
3. Disconnect the electrical connection (1) at the En-
gine Control Module (ECM) (2).
NH12AF001315A 3
4. Remove the wire ties (1) retaining the harness (2) to
the engine and tie away from the engine.
NH12AF001316A 4
47506838 04/04/2013
10.1 [10.001] / 4
14. Engine - Engine and crankcase
5. Disconnect the engine pre-heater connector (1) from
the engine pre-heater (2) .
NH12AF001319A 5
NH12AF001320A 6
6. Disconnect the fuel supply line (1).
NH12AF001321A 7
NH12AF001322A 8
47506838 04/04/2013
10.1 [10.001] / 5
15. Engine - Engine and crankcase
7. Disconnect the fuel return line (1).
NH12AF001323A 9
8. Return the unload tube (1) to the transport position
and use it to support the main PTO gearbox (2). The
main PTO gearbox must be supported during the en-
gine removal.
NH12AF001335A 10
NH12AF001333A 11
9. Remove the twelve bolts (1) retaining the main PTO
gearbox (2) to the engine (3).
NH12AF001336A 12
47506838 04/04/2013
10.1 [10.001] / 6
16. Engine - Engine and crankcase
10. Attach suitable lifting chains (1) to the engine lift
brackets (2) and attach to a suitable lifting device.
Support the engine while removing the engine
mounts.
NH12AF001337A 13
47506838 04/04/2013
10.1 [10.001] / 7
17. Engine - Engine and crankcase
11. Remove the hardware (1) from the engine mounts
(2).
NH12AF001339A 14
NH12AF001338A 15
NH12AF001340A 16
NH12AF001341A 17
47506838 04/04/2013
10.1 [10.001] / 8
18. Engine - Engine and crankcase
12. Slowly lift the engine (1) away from the main PTO
gearbox (2) and remove the engine from the ma-
chine.
NH12AF001337A 18
Next operation:
Engine - Install (10.001)
47506838 04/04/2013
10.1 [10.001] / 9
19. Engine - Engine and crankcase
Engine - Install
AXIAL-FLOW 5130
Prior operation:
Engine - Remove (10.001)
1. Attach suitable lifting chains (1) to the engine lift
brackets (2) and attach to a suitable lifting device.
Lift engine into position at the gearbox.
NH12AF001337A 1
2. Guide engine into the PTO gearbox and install twelve
gearbox to engine mount bolts.
NH12AF001336A 2
47506838 04/04/2013
10.1 [10.001] / 10
20. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
21. Engine - Engine and crankcase
3. Install engine mounts (2) and hardware (1). Tighten
hardware to standard torque.
NH12AF001339A 3
NH12AF001338A 4
NH12AF001340A 5
NH12AF001341A 6
47506838 04/04/2013
10.1 [10.001] / 11
22. Engine - Engine and crankcase
4. Connect the fuel return line (1).
NH12AF001323A 7
5. Connect the fuel supply line (1).
NH12AF001321A 8
NH12AF001322A 9
47506838 04/04/2013
10.1 [10.001] / 12
23. Engine - Engine and crankcase
6. Connect the engine pre-heater connector (1) to the
engine pre-heater (2) .
NH12AF001319A 10
NH12AF001320A 11
7. Connect the electrical connection (1) at the Engine
Control Module (ECM) (2).
NH12AF001315A 12
8. Install cable ties (1) to retain the harness (2) to the
engine.
NH12AF001316A 13
Next operation:
Diesel Exhaust Fluid (DEF)/AdBlue® lines - Install (10.500)
Next operation:
Engine starter - Install (55.201)
47506838 04/04/2013
10.1 [10.001] / 13