This document is a service manual for Case IH Axial-Flow combines that provides specifications and repair instructions. It covers the engine, transmission, axles, hydraulic and electrical systems, steering, brakes, cab climate control and other components. The manual is intended for technicians repairing Case IH 7240, 8240 and 9240 Axial-Flow combines that meet Tier 4B emissions standards and have model identification numbers within certain ranges.
Massey Ferguson MF290 XTRA TRACTORS (INDIA) Parts Catalogue Manualufjjsjekkeemme
This is the Highly Detailed factory Parts manual for theMASSEY FERGUSON MF290 XTRA TRACTORS, this Parts Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.MASSEY FERGUSON MF290 XTRA TRACTORS Parts Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this Parts manual is an inexpensive way to keep your vehicle working properly.
Parts Manual Covers:
Engine and Equipment
Clutch
Transmission
Rear Axle
Linkage
PTO-Drive Mechanism
Front Axle
Hydraulics
Electric Equipment and Instrument
Electronic Equipment
Sheet Metal
And more...
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveMASSEY FERGUSON MF290 XTRA TRACTORS Parts Manual.
Thanks for visiting!
New holland tj325 tractor service repair manualufjjsjekkeemme
- This document contains safety warnings and instructions for servicing agricultural equipment.
- It instructs technicians to turn off the engine, set the parking brake, block the wheels, and remove keys before servicing to prevent injury.
- Warnings advise wearing proper protective equipment like hard hats and gloves, and operating controls only from the operator's seat.
Massey ferguson mf 363 lx tractor service parts catalogue manual (part number...ufjjsjekkeemme
This document contains parts listings and descriptions for the engine of a Massey Ferguson 363 LX tractor. It includes 6 pages detailing over 80 individual parts for the engine block, crankshaft, cylinder head, and other components. Each part is listed with its number, quantity, description, and other identifying information. The document provides extensive reference information for maintenance and repair of this tractor engine.
Massey ferguson mf 350 tractor service parts catalogue manual (part number 8...ufjjsjekkeemme
This document provides parts information for a Massey Ferguson 350 tractor engine. It includes 4 pages of documentation with diagrams and lists of parts, part numbers, quantities and descriptions for the engine block, cylinder head, crankshaft, pistons, connecting rods and other engine components. Over 100 individual parts are detailed across the 4 pages of documentation.
The document is a parts catalog for a Massey Ferguson 6711 tractor. It contains 24 pages of detailed parts listings for various systems of the tractor, including the engine, axles, steering, brakes, hydraulics, electrical, cab, chassis, and implements. Each page lists the relevant part numbers, quantities, descriptions, and any additional comments for a specific assembly or system. The parts catalog provides a comprehensive listing of components for the tractor broken down by section.
Massey ferguson 6140 tractor service parts catalogue manual (part number 163...ufjjsjekkeemme
This document provides parts information for the engine of a Massey Ferguson 6140 tractor with serial number 1637275. It includes 42 line items with part numbers, quantities, descriptions and other details for the engine block, cylinder head, crankshaft, pistons, connecting rods and other engine components. It also provides references to other documents for additional part information.
Massey ferguson 6120 tractor service parts catalogue manual (part number 163...ufjjsjekkeemme
This document provides parts information for the engine of a Massey Ferguson 6120 tractor with serial number 1637273. It includes:
1. A list of 32 parts for the engine and their descriptions.
2. A list of 28 parts for the cylinder block and their descriptions.
3. A list of 23 parts for the crankshaft, pistons, and connecting rods and their descriptions.
Massey ferguson 5613 tractor (dyna 6) (e023046 g307020) service parts catal...ufjjsjekkeemme
This document provides a table of contents and parts lists for a Massey Ferguson 5613 tractor. The table of contents lists 24 sections that provide information on various tractor systems and components. Subsequent pages provide detailed parts lists and descriptions for the engine, cylinder block, crankshaft, camshaft, cylinder head, and intake manifold. Over 100 individual parts are detailed across 7 pages of the document.
Massey Ferguson MF290 XTRA TRACTORS (INDIA) Parts Catalogue Manualufjjsjekkeemme
This is the Highly Detailed factory Parts manual for theMASSEY FERGUSON MF290 XTRA TRACTORS, this Parts Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.MASSEY FERGUSON MF290 XTRA TRACTORS Parts Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this Parts manual is an inexpensive way to keep your vehicle working properly.
Parts Manual Covers:
Engine and Equipment
Clutch
Transmission
Rear Axle
Linkage
PTO-Drive Mechanism
Front Axle
Hydraulics
Electric Equipment and Instrument
Electronic Equipment
Sheet Metal
And more...
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveMASSEY FERGUSON MF290 XTRA TRACTORS Parts Manual.
Thanks for visiting!
New holland tj325 tractor service repair manualufjjsjekkeemme
- This document contains safety warnings and instructions for servicing agricultural equipment.
- It instructs technicians to turn off the engine, set the parking brake, block the wheels, and remove keys before servicing to prevent injury.
- Warnings advise wearing proper protective equipment like hard hats and gloves, and operating controls only from the operator's seat.
Massey ferguson mf 363 lx tractor service parts catalogue manual (part number...ufjjsjekkeemme
This document contains parts listings and descriptions for the engine of a Massey Ferguson 363 LX tractor. It includes 6 pages detailing over 80 individual parts for the engine block, crankshaft, cylinder head, and other components. Each part is listed with its number, quantity, description, and other identifying information. The document provides extensive reference information for maintenance and repair of this tractor engine.
Massey ferguson mf 350 tractor service parts catalogue manual (part number 8...ufjjsjekkeemme
This document provides parts information for a Massey Ferguson 350 tractor engine. It includes 4 pages of documentation with diagrams and lists of parts, part numbers, quantities and descriptions for the engine block, cylinder head, crankshaft, pistons, connecting rods and other engine components. Over 100 individual parts are detailed across the 4 pages of documentation.
The document is a parts catalog for a Massey Ferguson 6711 tractor. It contains 24 pages of detailed parts listings for various systems of the tractor, including the engine, axles, steering, brakes, hydraulics, electrical, cab, chassis, and implements. Each page lists the relevant part numbers, quantities, descriptions, and any additional comments for a specific assembly or system. The parts catalog provides a comprehensive listing of components for the tractor broken down by section.
Massey ferguson 6140 tractor service parts catalogue manual (part number 163...ufjjsjekkeemme
This document provides parts information for the engine of a Massey Ferguson 6140 tractor with serial number 1637275. It includes 42 line items with part numbers, quantities, descriptions and other details for the engine block, cylinder head, crankshaft, pistons, connecting rods and other engine components. It also provides references to other documents for additional part information.
Massey ferguson 6120 tractor service parts catalogue manual (part number 163...ufjjsjekkeemme
This document provides parts information for the engine of a Massey Ferguson 6120 tractor with serial number 1637273. It includes:
1. A list of 32 parts for the engine and their descriptions.
2. A list of 28 parts for the cylinder block and their descriptions.
3. A list of 23 parts for the crankshaft, pistons, and connecting rods and their descriptions.
Massey ferguson 5613 tractor (dyna 6) (e023046 g307020) service parts catal...ufjjsjekkeemme
This document provides a table of contents and parts lists for a Massey Ferguson 5613 tractor. The table of contents lists 24 sections that provide information on various tractor systems and components. Subsequent pages provide detailed parts lists and descriptions for the engine, cylinder block, crankshaft, camshaft, cylinder head, and intake manifold. Over 100 individual parts are detailed across 7 pages of the document.
Massey ferguson 5612 tractor (dyna 6) (d295023 g165048) service parts catal...ufjjsjekkeemme
The document is a table of contents for the service manual of a Massey Ferguson 5612 tractor. It lists 24 sections that make up the manual, including the engine, axles, steering system, drive train, brakes, hydraulics, electrical system, cab, chassis, decals, wheels, and implements. Each section includes multiple sub-pages providing part numbers, descriptions and other technical details for servicing and repairing components of the tractor.
John deere power tech e 3.0l diesel engines service repair technical manual (...ufjjsjekkeemme
The document provides instructions for removing and installing various components of PowerTech E 2.4L and 3.0L diesel engines, including the flywheel, flywheel ring gear, flywheel housing, balancer shafts, and main bearing caps. Safety cautions are provided regarding heating components and handling heavy parts. Special tools and torque specifications are listed for each procedure.
John deere power tech e 2.4l diesel engines service repair technical manual (...ufjjsjekkeemme
The document provides instructions for removing and installing various components of PowerTech E 2.4L and 3.0L diesel engines, including the flywheel, flywheel ring gear, flywheel housing, balancer shafts, and measuring main bearing cap clearances. The removal instructions list necessary special tools and safety precautions for each component. Installation sections specify torque specifications and use of thread locking compounds.
1. The document provides instructions for disassembling and reassembling the carrier roller of an excavator model EL240.
2. The disassembly instructions describe cleaning parts and removing components like seals, bolts, and bushings. The reassembly instructions describe installing components in reverse order and applying lubricants like engine oil and threadlock.
3. Maintenance standards are provided for wear limits, repair welding procedures, and storage of items for up to 12 months.
1. The document provides instructions for disassembling and reassembling the carrier roller of an excavator model EL240.
2. The disassembly instructions describe cleaning parts and removing components like seals, bolts, and bushings. The reassembly instructions describe installing components in reverse order and applying lubricants like engine oil and threadlock.
3. Maintenance standards are provided for wear limits, repair welding procedures, and storage of items for up to 12 months.
Caterpillar cat d8 t track type tractor dozer bulldozer (prefix mb8) service ...ufjjsjekkeemme
This document provides instructions for removing and installing the final drive on a D8T track-type tractor. The removal procedure involves using lifting devices and tools to detach various components of the final drive including the planetary carrier, sprocket hub, and reaction hub. These components are then disassembled further by removing shafts, gears, seals, and bearings. The assembly procedure reverses these steps, noting to clean and lubricate parts, carefully install seals using specialty tools, and tighten fasteners to the specified torques.
Caterpillar cat d8 t track type tractor dozer bulldozer (prefix fct) service ...ufjjsjekkeemme
The document provides instructions for removing and installing the front cover on a Caterpillar D8T track-type tractor with a C15 engine. The removal procedure involves using a socket to remove bolts securing the front cover. For installation, the front cover is secured with bolts using Loctite after cleaning all parts. Proper torque is applied to the bolts to complete the installation.
Caterpillar cat 320 f l excavator (prefix nhd) service repair manual (nhd0000...ufjjsjekkeemme
This document provides instructions for disassembling and assembling the travel motor of a 320F L excavator. The disassembly procedure involves 27 steps to remove components such as the head, fittings, seals, piston guide, barrel assembly, and shaft. The assembly procedure describes 30 steps including installing seals, plates, springs, and reassembling components like the barrel assembly, piston guide and head in their original positions and orientations. Precise assembly is required to prevent damage to components like the cam plate.
Caterpillar cat 320 e l excavator (prefix wbk) service repair manual (wbk0000...ufjjsjekkeemme
This document provides instructions for removing and installing a flywheel housing on a Caterpillar C6.6 engine. It describes two procedures: one for a standard housing and one for a wet back-end housing. The standard procedure involves removing bolts to detach the housing from the cylinder block. Dowels and seals must also be inspected or installed. The wet back-end procedure is similar but notes that a seal may be omitted if used on a standard engine. Precise torques are specified for bolting the housing depending on bolt grade. Alignment of the housing must be checked after installation.
Caterpillar cat 320 e l excavator (prefix tnj) service repair manual (tnj0000...ufjjsjekkeemme
This document provides instructions for removing and installing inlet and exhaust valves on a Caterpillar 320E L excavator engine. The removal process involves using specialized tools to compress the valve springs and remove the keepers and springs. Installation is the reverse of removal, requiring cleaning, lubricating, and using tools to compress springs during reassembly. Proper torque values are specified for reinstalling components.
Caterpillar cat 320 c ln excavator (prefix dbg) service repair manual (dbg000...ufjjsjekkeemme
This document provides instructions for servicing components of Caterpillar 320C excavator engines, including removing and installing the crankshaft front seal, flywheel, and flywheel housing. The procedures describe using various tools to remove parts like the crankshaft seal and installing replacement parts while taking precautions to contain fluids and prevent contamination.
Caterpillar cat 320 c l excavator (prefix dbg) service repair manual (dbg0000...ufjjsjekkeemme
This document provides instructions for removing and installing a crankshaft pulley on excavator models 320C, 320C L, and 320C LN. It outlines the required tools and steps to remove the V-belts, nut, washer, and pulley using a combination puller. It also describes cleaning parts and installing a new pulley by reversing the removal steps. Proper torque is required for reinstallation.
Caterpillar cat 320 c excavator (prefix dbg) service repair manual (dbg00001 ...ufjjsjekkeemme
This document provides instructions for servicing components of Caterpillar 320C excavator engines, including removing and installing the crankshaft front seal, flywheel, and flywheel housing. The procedures describe using various tools to remove parts like the crankshaft seal and installing replacement parts while taking precautions to contain fluids and prevent contamination.
Caterpillar cat 259 d compact track loader (prefix ftk) service repair manual...ufjjsjekkeemme
This document provides instructions for removing and installing a camshaft gear and removing and installing an engine oil pan on a 259D compact track loader. It describes using various tools to remove the camshaft gear from the camshaft and removing bolts to take off the oil pan. It then explains installing the camshaft gear and oil pan in reverse order while applying sealant. Proper draining and filling procedures are noted.
Caterpillar cat 248 b skid steer loader (prefix scl) service repair manual (s...ufjjsjekkeemme
This document provides instructions for removing and installing inlet and exhaust valve springs on a 248B skid steer loader with a 3044C engine. It outlines the required tools and multi-step procedures, which include using air pressure to hold the valves in place while removing and installing the springs. Safety notices are included to warn of potential injury from parts propelled by spring force. The document also provides instructions for removing and installing inlet and exhaust valve guides and seats.
Caterpillar cat 246 c skid steer loader (prefix jay) service repair manual (j...ufjjsjekkeemme
This document provides instructions for removing and installing inlet and exhaust valve springs on a 246C Skid Steer Loader with a 3044C engine. The removal procedure involves using special tools to compress the valve springs so the retainers and springs can be removed safely. Installation involves inspecting the springs and using the compressor tool to insert the springs and retainers. Proper safety precautions are outlined to avoid injury from the spring force. The process is also described for removing valves from a cylinder head removed from the engine.
Case quantum 80 cl tractor service repair manual (pin zflk00441 and above)ufjjsjekkeemme
This document is a service manual for Quantum tractor models 80F-110F and 80CL-110CL. It contains information on engine systems, transmission, axles, hydraulics, electrical systems, and other components. The manual instructs technicians to only perform repairs listed using proper tools and procedures, and warns that unauthorized repairs could damage equipment. It provides overviews and part numbers for servicing various tractor systems.
Case ih wd1204 tier 3 self propelled windrower service repair manual [ -yfg67...ufjjsjekkeemme
This document provides service information for an engine used in a WD1204 self-propelled windrower, including:
- The engine is a 4-cylinder turbocharged and aftercooled unit that meets Tier 3 emissions standards.
- Instructions are provided for draining engine oil, replacing the oil filter, filling with new oil, and checking the oil level.
- Additional sections will cover other engine systems like air intake, fuel, cooling, and exhaust.
Case ih titan 4530 floater service repair manualufjjsjekkeemme
This document is a service manual for Case IH Titan 3030, 3530, 4030, and 4530 tractors. It contains safety rules, specifications, capacities, and sections covering the tractor's hydraulic, pneumatic, electrical, and other systems. The sections provide information on maintenance, repair, and fault codes for the engine, transmission, axles, brakes, steering, frame, and other components. Torque specifications are also included for various hardware sizes.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Massey ferguson 5612 tractor (dyna 6) (d295023 g165048) service parts catal...ufjjsjekkeemme
The document is a table of contents for the service manual of a Massey Ferguson 5612 tractor. It lists 24 sections that make up the manual, including the engine, axles, steering system, drive train, brakes, hydraulics, electrical system, cab, chassis, decals, wheels, and implements. Each section includes multiple sub-pages providing part numbers, descriptions and other technical details for servicing and repairing components of the tractor.
John deere power tech e 3.0l diesel engines service repair technical manual (...ufjjsjekkeemme
The document provides instructions for removing and installing various components of PowerTech E 2.4L and 3.0L diesel engines, including the flywheel, flywheel ring gear, flywheel housing, balancer shafts, and main bearing caps. Safety cautions are provided regarding heating components and handling heavy parts. Special tools and torque specifications are listed for each procedure.
John deere power tech e 2.4l diesel engines service repair technical manual (...ufjjsjekkeemme
The document provides instructions for removing and installing various components of PowerTech E 2.4L and 3.0L diesel engines, including the flywheel, flywheel ring gear, flywheel housing, balancer shafts, and measuring main bearing cap clearances. The removal instructions list necessary special tools and safety precautions for each component. Installation sections specify torque specifications and use of thread locking compounds.
1. The document provides instructions for disassembling and reassembling the carrier roller of an excavator model EL240.
2. The disassembly instructions describe cleaning parts and removing components like seals, bolts, and bushings. The reassembly instructions describe installing components in reverse order and applying lubricants like engine oil and threadlock.
3. Maintenance standards are provided for wear limits, repair welding procedures, and storage of items for up to 12 months.
1. The document provides instructions for disassembling and reassembling the carrier roller of an excavator model EL240.
2. The disassembly instructions describe cleaning parts and removing components like seals, bolts, and bushings. The reassembly instructions describe installing components in reverse order and applying lubricants like engine oil and threadlock.
3. Maintenance standards are provided for wear limits, repair welding procedures, and storage of items for up to 12 months.
Caterpillar cat d8 t track type tractor dozer bulldozer (prefix mb8) service ...ufjjsjekkeemme
This document provides instructions for removing and installing the final drive on a D8T track-type tractor. The removal procedure involves using lifting devices and tools to detach various components of the final drive including the planetary carrier, sprocket hub, and reaction hub. These components are then disassembled further by removing shafts, gears, seals, and bearings. The assembly procedure reverses these steps, noting to clean and lubricate parts, carefully install seals using specialty tools, and tighten fasteners to the specified torques.
Caterpillar cat d8 t track type tractor dozer bulldozer (prefix fct) service ...ufjjsjekkeemme
The document provides instructions for removing and installing the front cover on a Caterpillar D8T track-type tractor with a C15 engine. The removal procedure involves using a socket to remove bolts securing the front cover. For installation, the front cover is secured with bolts using Loctite after cleaning all parts. Proper torque is applied to the bolts to complete the installation.
Caterpillar cat 320 f l excavator (prefix nhd) service repair manual (nhd0000...ufjjsjekkeemme
This document provides instructions for disassembling and assembling the travel motor of a 320F L excavator. The disassembly procedure involves 27 steps to remove components such as the head, fittings, seals, piston guide, barrel assembly, and shaft. The assembly procedure describes 30 steps including installing seals, plates, springs, and reassembling components like the barrel assembly, piston guide and head in their original positions and orientations. Precise assembly is required to prevent damage to components like the cam plate.
Caterpillar cat 320 e l excavator (prefix wbk) service repair manual (wbk0000...ufjjsjekkeemme
This document provides instructions for removing and installing a flywheel housing on a Caterpillar C6.6 engine. It describes two procedures: one for a standard housing and one for a wet back-end housing. The standard procedure involves removing bolts to detach the housing from the cylinder block. Dowels and seals must also be inspected or installed. The wet back-end procedure is similar but notes that a seal may be omitted if used on a standard engine. Precise torques are specified for bolting the housing depending on bolt grade. Alignment of the housing must be checked after installation.
Caterpillar cat 320 e l excavator (prefix tnj) service repair manual (tnj0000...ufjjsjekkeemme
This document provides instructions for removing and installing inlet and exhaust valves on a Caterpillar 320E L excavator engine. The removal process involves using specialized tools to compress the valve springs and remove the keepers and springs. Installation is the reverse of removal, requiring cleaning, lubricating, and using tools to compress springs during reassembly. Proper torque values are specified for reinstalling components.
Caterpillar cat 320 c ln excavator (prefix dbg) service repair manual (dbg000...ufjjsjekkeemme
This document provides instructions for servicing components of Caterpillar 320C excavator engines, including removing and installing the crankshaft front seal, flywheel, and flywheel housing. The procedures describe using various tools to remove parts like the crankshaft seal and installing replacement parts while taking precautions to contain fluids and prevent contamination.
Caterpillar cat 320 c l excavator (prefix dbg) service repair manual (dbg0000...ufjjsjekkeemme
This document provides instructions for removing and installing a crankshaft pulley on excavator models 320C, 320C L, and 320C LN. It outlines the required tools and steps to remove the V-belts, nut, washer, and pulley using a combination puller. It also describes cleaning parts and installing a new pulley by reversing the removal steps. Proper torque is required for reinstallation.
Caterpillar cat 320 c excavator (prefix dbg) service repair manual (dbg00001 ...ufjjsjekkeemme
This document provides instructions for servicing components of Caterpillar 320C excavator engines, including removing and installing the crankshaft front seal, flywheel, and flywheel housing. The procedures describe using various tools to remove parts like the crankshaft seal and installing replacement parts while taking precautions to contain fluids and prevent contamination.
Caterpillar cat 259 d compact track loader (prefix ftk) service repair manual...ufjjsjekkeemme
This document provides instructions for removing and installing a camshaft gear and removing and installing an engine oil pan on a 259D compact track loader. It describes using various tools to remove the camshaft gear from the camshaft and removing bolts to take off the oil pan. It then explains installing the camshaft gear and oil pan in reverse order while applying sealant. Proper draining and filling procedures are noted.
Caterpillar cat 248 b skid steer loader (prefix scl) service repair manual (s...ufjjsjekkeemme
This document provides instructions for removing and installing inlet and exhaust valve springs on a 248B skid steer loader with a 3044C engine. It outlines the required tools and multi-step procedures, which include using air pressure to hold the valves in place while removing and installing the springs. Safety notices are included to warn of potential injury from parts propelled by spring force. The document also provides instructions for removing and installing inlet and exhaust valve guides and seats.
Caterpillar cat 246 c skid steer loader (prefix jay) service repair manual (j...ufjjsjekkeemme
This document provides instructions for removing and installing inlet and exhaust valve springs on a 246C Skid Steer Loader with a 3044C engine. The removal procedure involves using special tools to compress the valve springs so the retainers and springs can be removed safely. Installation involves inspecting the springs and using the compressor tool to insert the springs and retainers. Proper safety precautions are outlined to avoid injury from the spring force. The process is also described for removing valves from a cylinder head removed from the engine.
Case quantum 80 cl tractor service repair manual (pin zflk00441 and above)ufjjsjekkeemme
This document is a service manual for Quantum tractor models 80F-110F and 80CL-110CL. It contains information on engine systems, transmission, axles, hydraulics, electrical systems, and other components. The manual instructs technicians to only perform repairs listed using proper tools and procedures, and warns that unauthorized repairs could damage equipment. It provides overviews and part numbers for servicing various tractor systems.
Case ih wd1204 tier 3 self propelled windrower service repair manual [ -yfg67...ufjjsjekkeemme
This document provides service information for an engine used in a WD1204 self-propelled windrower, including:
- The engine is a 4-cylinder turbocharged and aftercooled unit that meets Tier 3 emissions standards.
- Instructions are provided for draining engine oil, replacing the oil filter, filling with new oil, and checking the oil level.
- Additional sections will cover other engine systems like air intake, fuel, cooling, and exhaust.
Case ih titan 4530 floater service repair manualufjjsjekkeemme
This document is a service manual for Case IH Titan 3030, 3530, 4030, and 4530 tractors. It contains safety rules, specifications, capacities, and sections covering the tractor's hydraulic, pneumatic, electrical, and other systems. The sections provide information on maintenance, repair, and fault codes for the engine, transmission, axles, brakes, steering, frame, and other components. Torque specifications are also included for various hardware sizes.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Charging Fueling & Infrastructure (CFI) Program by Kevin MillerForth
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Charging Fueling & Infrastructure (CFI) Program Resources by Cat PleinForth
Cat Plein, Development & Communications Director of Forth, gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Charging and Fueling Infrastructure Grant: Round 2 by Brandt HertensteinForth
Brandt Hertenstein, Program Manager of the Electrification Coalition gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
10. INTRODUCTION
Safety rules
Personal safety
This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all
safety messages that follow this symbol to avoid possible death or injury.
Throughout this manual you will find the signal words DANGER, WARNING, and CAUTION followed by special in-
structions. These precautions are intended for the personal safety of you and those working with you.
Read and understand all the safety messages in this manual before you operate or service the machine.
DANGER indicates a hazardous situation that, if not avoided, will result in death or serious injury.
WARNING indicates a hazardous situation that, if not avoided, could result in death or serious injury.
CAUTION indicates a hazardous situation that, if not avoided, could result in minor or moderate injury.
FAILURE TO FOLLOW DANGER, WARNING, AND CAUTION MESSAGES COULD RESULT
IN DEATH OR SERIOUS INJURY.
Machine safety
NOTICE: Notice indicates a situation that, if not avoided, could result in machine or property damage.
Throughout this manual you will find the signal word Notice followed by special instructions to prevent machine or
property damage. The word Notice is used to address practices not related to personal safety.
Information
NOTE: Note indicates additional information that clarifies steps, procedures, or other information in this manual.
Throughout this manual you will find the word Note followed by additional information about a step, procedure, or
other information in the manual. The word Note is not intended to address personal safety or property damage.
48144050 25/08/2017
5
11. INTRODUCTION
Safety rules - Ecology and the environment
Soil, air, and water quality is important for all industries and life in general. When legislation does not yet rule the
treatment of some of the substances that advanced technology requires, sound judgment should govern the use and
disposal of products of a chemical and petrochemical nature.
Familiarize yourself with the relative legislation applicable to your country, and make sure that you understand this
legislation. Where no legislation exists, obtain information from suppliers of oils, filters, batteries, fuels, anti-freeze,
cleaning agents, etc., with regard to the effect of these substances on man and nature and how to safely store, use,
and dispose of these substances.
Helpful hints
• Avoid the use of cans or other inappropriate pressurized fuel delivery systems to fill tanks. Such delivery systems
may cause considerable spillage.
• In general, avoid skin contact with all fuels, oils, acids, solvents, etc. Most of these products contain substances
that may be harmful to your health.
• Modern oils contain additives. Do not burn contaminated fuels and or waste oils in ordinary heating systems.
• Avoid spillage when you drain fluids such as used engine coolant mixtures, engine oil, hydraulic fluid, brake fluid,
etc. Do not mix drained brake fluids or fuels with lubricants. Store all drained fluids safely until you can dispose of
the fluids in a proper way that complies with all local legislation and available resources.
• Do not allow coolant mixtures to get into the soil. Collect and dispose of coolant mixtures properly.
• The air-conditioning system contains gases that should not be released into the atmosphere. Consult an air-condi-
tioning specialist or use a special extractor to recharge the system properly.
• Repair any leaks or defects in the engine cooling system or hydraulic system immediately.
• Do not increase the pressure in a pressurized circuit as this may lead to a component failure.
• Protect hoses during welding. Penetrating weld splatter may burn a hole or weaken hoses, allowing the loss of oils,
coolant, etc.
Battery recycling
Batteries and electric accumulators contain several substances that can have a harmful
effect on the environment if the batteries are not properly recycled after use. Improper
disposal of batteries can contaminate the soil, groundwater, and waterways. CASE IH
strongly recommends that you return all used batteries to a CASE IH dealer, who will
dispose of the used batteries or recycle the used batteries properly. In some countries,
this is a legal requirement.
Mandatory battery recycling
NOTE: The following requirements are mandatory in Brazil.
Batteries are made of lead plates and a sulfuric acid solution. Because batteries contain heavy metals such as lead,
CONAMA Resolution 401/2008 requires you to return all used batteries to the battery dealer when you replace any
batteries. Do not dispose of batteries in your household garbage.
Points of sale are obliged to:
• Accept the return of your used batteries
• Store the returned batteries in a suitable location
• Send the returned batteries to the battery manufacturer for recycling
48144050 25/08/2017
6
12. INTRODUCTION
Safety rules Repair and maintenance
All repair and maintenance works listed in this manual must be carried out only by qualified dealership personnel,
strictly complying with the instructions given; and using, whenever possible, the special tools.
Anyone who carries out the above operations without complying with the procedures shall be responsible for the
subsequent damages.
The manufacturer and all the organizations of it's distribution chain, including - without limitation - national, regional,
or local dealers, reject any responsibility for damages due to the anomalous behavior of parts and/or components not
approved by the manufacturer himself, including those used for the servicing or repair of the product manufactured
or marketed by the manufacturer. In any case, no warranty is given or attributed on the product manufactured or
marketed by the manufacturer in case of damages due to an anomalous behavior of parts and/or components not
approved by the manufacturer.
The information in this manual is up-to-date at the date of the publication. It is the policy of the manufacturer for
continuous improvement. Some information could not be updated due to modifications of a technical or commercial
type, as well as to suit the laws and regulations of different countries.
In case of questions, refer to your Sales and Service Networks.
48144050 25/08/2017
7
15. Engine - Engine and crankcase
Engine - Remove - Cursor 11 and 13
AXIAL-FLOW® 7240 NA
AXIAL-FLOW® 8240 NA
WARNING
Avoid injury! Always do the following before lubricating, maintaining, or servicing the machine.
1. Disengage all drives.
2. Engage parking brake.
3. Lower all attachments to the ground, or raise and engage all safety locks.
4. Shut off engine.
5. Remove key from key switch.
6. Switch off battery key, if installed.
7. Wait for all machine movement to stop.
Failure to comply could result in death or serious injury.
W0047A
WARNING
Heavy objects!
Lift and handle all heavy components using lifting equipment with adequate capacity. Always support
units or parts with suitable slings or hooks. Make sure the work area is clear of all bystanders.
Failure to comply could result in death or serious injury.
W0398A
Prior operation:
Remove the oil drain hose. See Engine - Remove engine oil drain line and drain valve (10.001)
Prior operation:
Radiator - Drain fluid (10.400)
Prior operation:
Deaeration tank - Remove (10.400)
Prior operation:
Engine hood and panels - Remove (90.100)
Prior operation:
Radiator hoses - Remove (10.400)
Prior operation:
Central wiring harness - Remove (55.100)
Prior operation:
Aftercooler air supply and return lines - Remove air supply tube (10.310)
Prior operation:
Aftercooler air supply and return lines - Remove air return tube (10.310)
Prior operation:
Air cleaner connection between filter and engine - Remove (10.202)
Prior operation:
Connection tube from filter to muffler - Remove (10.202)
Prior operation:
Fan and drive - Remove (10.414)
Prior operation:
Air-conditioning compressor - Remove (50.200)
Prior operation:
Fuel supply lines Low pressure - Remove from the engine (10.210)
Prior operation:
Fuel return lines - Remove from the engine (10.210)
Prior operation:
Exhaust muffler - Remove mixer tube (10.254)
Prior operation:
Exhaust muffler - Remove exhaust tube from turbo charger to Diesel Oxidation Catalyst (DOC) (10.254)
Prior operation:
Diesel Exhaust Fluid (DEF)/AdBlue®/ARLA lines - Remove DEF hose bundle from the engine compartment
(10.500)
Prior operation:
Selective Catalytic Reduction (SCR) muffler and catalyst - Remove (10.500)
Prior operation:
48144050 25/08/2017
10.1 [10.001] / 3
16. Engine - Engine and crankcase
Diesel Oxidation Catalyst (DOC) - Remove (10.500)
NOTE: Illustrations are for reference only. It may not be the actual engine.
1. Disengage the battery connect switch (1).
NHIL13AF00586AA 1
2. Attach a suitable lift chain to the front lift eye (1) at the
front of the engine.
NHIL14AF00431AA 2
3. Attach a suitable lift chain to the back lift eye (1) at the
rear of the engine.
NHIL14AF00432AA 3
48144050 25/08/2017
10.1 [10.001] / 4
17. Engine - Engine and crankcase
4. Connect the lift chain to a suitable lifting device.
5. Raise the lifting device enough to support the engine
during removal of the engine mounting bolts.
NOTE: The lifting device should be rated for at least
907.2 kg (2000 lb). Allow enough clearance to lift the
engine from the combine, approximately 7.0 m (23 ft) from
the floor.
10013136 4
6. From the grain tank side of the engine, loosen the front,
engine mounting bolts (1). Do not remove the mounting
bolts at this time.
7. From the platform side, loosen the front, engine mount-
ing bolts (2). Do not remove the mounting bolts at this
time.
NHIL14AF01001AA 5
8. From the rear of the engine, loosen but do not remove
all the bolts and washers (1) that couple the engine to
the gearbox. There are twelve bolts and washers in
total.
9. For safety reasons to the radiators, place a sheet of
plywood, cut to size, in front of the cooler box for pro-
tection.
10. With the engine securely supported by the lifting de-
vice, remove all of the engine mounting bolts and the
engine to the gearbox coupling bolts that were loos-
ened in the previous steps.
11. Slide the engine towards the cooler box to disengage
the flex plate from the gearbox input shaft.
12. Carefully lift the engine from the frame and remove
from the combine. NHIL14AF01004AA 6
Next operation:
Engine - Install - Cursor 11 and 13 (10.001) .
48144050 25/08/2017
10.1 [10.001] / 5
18. Engine - Engine and crankcase
Engine - Install - Cursor 11 and 13
AXIAL-FLOW® 7240 NA
AXIAL-FLOW® 8240 NA
WARNING
Avoid injury! Always do the following before lubricating, maintaining, or servicing the machine.
1. Disengage all drives.
2. Engage parking brake.
3. Lower all attachments to the ground, or raise and engage all safety locks.
4. Shut off engine.
5. Remove key from key switch.
6. Switch off battery key, if installed.
7. Wait for all machine movement to stop.
Failure to comply could result in death or serious injury.
W0047A
WARNING
Heavy objects!
Lift and handle all heavy components using lifting equipment with adequate capacity. Always support
units or parts with suitable slings or hooks. Make sure the work area is clear of all bystanders.
Failure to comply could result in death or serious injury.
W0398A
Prior operation:
Engine - Remove - Cursor 11 and 13 (10.001)
NOTE: Illustrations are for reference only. It may not be the actual engine.
1. Before installing the engine, apply LOCTITE® SILVER
GRADE ANTI-SEIZE to the input shaft (1) of the gearbox.
83070284 1
2. Attach a suitable chain to the front lift eye (1) at the front
of the engine.
86070259 2
48144050 25/08/2017
10.1 [10.001] / 6
19. Engine - Engine and crankcase
3. Attach a suitable chain to the back lift eye (1) at the rear
of the engine.
86070260 3
4. Connect the lift chain to a suitable lifting device.
5. Carefully lift the engine above the combine and lower
into position in the frame.
NOTE: The lifting device should be rated for at least
907.2 kg (2000 lb). Allow enough clearance to lift the en-
gine from the combine, approximately 907.2 kg (2000 lb)
from the floor.
10013136 4
6. For safety reasons to the radiator, place a sheet of ply-
wood, cut to size, in front of the radiator for protection.
7. Slide the engine towards the gearbox onto the gear box
input shaft.
8. Align the holes of the gearbox with the engine and hand
start a bolt with a washer (1) on each side of the cou-
pling, going back and forth until all bolts with a washers
are installed.
NHIL14AF01004AA 5
48144050 25/08/2017
10.1 [10.001] / 7
20. Engine - Engine and crankcase
9. With the engine positioned in the frame, align the front
mounting hole on the grain tank side and install the bolt
with washers (1) into the mount. Do not tighten yet.
10. Align the front mounting hole on the platform side. In-
stall the bolt with washers (1) into the mount.
11. Tighten and torque the front engine mounting bolts to
217 Nm (160.1 lb ft).
12. Tighten and torque the engine gearbox bolts to 41 –
51 Nm (30.2 – 37.6 lb ft).
NHIL14AF01001AA 6
48144050 25/08/2017
10.1 [10.001] / 8
21. Engine - Engine and crankcase
Next Operations
Central wiring harness - Install (55.100)
Diesel Oxidation Catalyst (DOC) - Install (10.500)
Selective Catalytic Reduction (SCR) muffler and catalyst - Install (10.500)
Diesel Exhaust Fluid (DEF)/AdBlue®/ARLA lines - Remove DEF hose bundle from the engine compartment
(10.500)
Deaeration tank - Install (10.400)
Radiator hoses - Install (10.400)
Radiator - Filling (10.400)
Aftercooler air supply and return lines - Install air return tube (10.310)
Aftercooler air supply and return lines - Install air supply tube (10.310)
Exhaust muffler - Install exhaust tube from turbo charger to Diesel Oxidation Catalyst (DOC) (10.254)
Exhaust muffler - Install mixer tube (10.254)
Fuel return lines - Install to the engine (10.210)
Fuel supply lines Low pressure - Install to the engine (10.210)
Fan and drive - Install (10.414)
Air conditioning - Service instruction (50.200)
Air cleaner connection between filter and engine - Install (10.202)
Engine hood and panels - Install (90.100)
13. Engage the battery connect switch (1).
NHIL13AF00586AA 7
14. Disconnect the fuel pump wire connector (1) to disable
the fuel pump (2).
NHIL14AF00745AA 8
15. Check the engine oil level and top off if necessary.
16. Crank the engine over for three ten second intervals.
This will distribute lubricating oil to the engine oper-
ating systems and will allow oil pressure to be built
before starting the engine.
48144050 25/08/2017
10.1 [10.001] / 9
22. Engine - Engine and crankcase
17. Connect the fuel pump wire connector (1) to the fuel
pump (2) and bleed the air from fuel injection system,
as described in the Operators manual.
18. Start the engine and check all hoses, fittings and
clamps for leaks.
NOTICE: Monitor the instrument warning light bar at all
times during initial engine start up to ensure the engine has
proper oil pressure. Shut down the engine immediately if
oil pressure is not adequate.
19. Ensure all electrical components are working properly.
NHIL14AF00745AA 9
48144050 25/08/2017
10.1 [10.001] / 10
23. Engine - Engine and crankcase
Engine - Remove - Cursor 16
AXIAL-FLOW® 9240 NA
WARNING
Avoid injury! Always do the following before lubricating, maintaining, or servicing the machine.
1. Disengage all drives.
2. Engage parking brake.
3. Lower all attachments to the ground, or raise and engage all safety locks.
4. Shut off engine.
5. Remove key from key switch.
6. Switch off battery key, if installed.
7. Wait for all machine movement to stop.
Failure to comply could result in death or serious injury.
W0047A
WARNING
Heavy objects!
Lift and handle all heavy components using lifting equipment with adequate capacity. Always support
units or parts with suitable slings or hooks. Make sure the work area is clear of all bystanders.
Failure to comply could result in death or serious injury.
W0398A
Prior operation:
Engine hood and panels - Remove (90.100)
Prior operation:
Central wiring harness - Remove (55.100)
Prior operation:
Fan and drive - Remove (10.414)
Prior operation:
Air conditioning - Service instruction (50.200)
Prior operation:
Air intake system - Remove (10.202)
Prior operation:
Fuel supply lines Low pressure - Remove from the engine (10.210)
Prior operation:
Fuel return lines - Remove from the engine (10.210)
Prior operation:
Exhaust muffler - Remove mixer tube (10.254)
Prior operation:
Exhaust muffler - Remove exhaust tube from turbo charger to Diesel Oxidation Catalyst (DOC) (10.254)
Prior operation:
Aftercooler air supply and return lines - Remove air supply tube (10.310)
Prior operation:
Aftercooler air supply and return lines - Remove air return tube (10.310)
Prior operation:
Radiator - Drain fluid (10.400)
Prior operation:
Radiator hoses - Remove (10.400)
Prior operation:
Deaeration tank - Remove (10.400)
Prior operation:
Diesel Exhaust Fluid (DEF)/AdBlue®/ARLA lines - Remove (10.500)
Prior operation:
Selective Catalytic Reduction (SCR) muffler and catalyst - Remove (10.500)
Prior operation:
Diesel Oxidation Catalyst (DOC) - Remove (10.500)
NOTE: Illustrations are for reference only. It may not be the actual engine.
48144050 25/08/2017
10.1 [10.001] / 11
24. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
25. Engine - Engine and crankcase
1. Disengage the battery connect switch (1).
NHIL13AF00586AA 1
2. Attach a suitable chain to the front lift eye (1) at the front
of the engine.
NHIL14AF00431AA 2
3. Attach a suitable chain to the back lift eye (1) at the rear
of the engine.
86070260 3
4. Connect the lift chain to a suitable lifting device.
5. Raise the lifting device enough to support the engine
during removal of the engine mounting bolts.
NOTE: Illustration is for reference only. It may not be the
actual engine.
NOTE: The lifting device should be rated for at least
907.2 kg (2000 lb). Allow enough clearance to lift the
engine from the combine, approximately 7.0 m (23 ft) from
the floor.
10013136 4
48144050 25/08/2017
10.1 [10.001] / 12
26. Engine - Engine and crankcase
6. From the grain tank side of engine, loosen the front two
engine mounting bolts (1). Do not remove the mounting
bolts at this time.
7. From the platform side, loosen the two front, engine
mounting bolts (2). Do not remove the mounting bolts
at this time.
NHIL14AF01003AA 5
8. Loosen but do not remove all the bolts and washers (1)
that couple the engine to the gearbox. There are twelve
bolts and washers in total.
9. For safety reasons to the radiators, place a sheet of
plywood, cut to size, in front of the cooler box for pro-
tection.
10. With the engine securely supported by the lifting de-
vice, remove all of the engine mounting bolts and the
engine to the gearbox coupling bolts that were loos-
ened in the previous steps.
11. Slide the engine towards the cooler box to disengage
the flex plate from the gearbox input shaft.
12. Carefully lift the engine from the frame and remove
from the combine.
NHIL14AF01005AA 6
Next operation:
Engine - Install - Cursor 16 (10.001) .
48144050 25/08/2017
10.1 [10.001] / 13
27. Engine - Engine and crankcase
Engine - Install - Cursor 16
AXIAL-FLOW® 9240 NA
WARNING
Avoid injury! Always do the following before lubricating, maintaining, or servicing the machine.
1. Disengage all drives.
2. Engage parking brake.
3. Lower all attachments to the ground, or raise and engage all safety locks.
4. Shut off engine.
5. Remove key from key switch.
6. Switch off battery key, if installed.
7. Wait for all machine movement to stop.
Failure to comply could result in death or serious injury.
W0047A
WARNING
Heavy objects!
Lift and handle all heavy components using lifting equipment with adequate capacity. Always support
units or parts with suitable slings or hooks. Make sure the work area is clear of all bystanders.
Failure to comply could result in death or serious injury.
W0398A
Prior operation:
Engine - Remove - Cursor 16 (10.001)
NOTE: Illustrations are for reference only. It may not be the actual engine.
1. Before installing the engine, apply LOCTITE® SILVER
GRADE ANTI-SEIZE to the input shaft (1) of the gearbox.
83070284 1
2. Attach a suitable chain to the front lift eye (1) at the front
of the engine.
86070259 2
48144050 25/08/2017
10.1 [10.001] / 14
28. Engine - Engine and crankcase
3. Attach a suitable chain to the back lift eye (1) at the rear
of the engine.
86070260 3
4. Connect the lift chain to a suitable lifting device.
5. Carefully lift the engine above the combine and lower
into position in the frame.
NOTE: The lifting device should be rated for at least
907.2 kg (2000 lb). Allow enough clearance to lift the en-
gine from the combine, approximately 907.2 kg (2000 lb)
from the floor.
10013136 4
6. For safety reasons to the radiator, place a sheet of ply-
wood, cut to size, in front of the radiator for protection.
7. Slide the engine towards the gearbox onto the gear box
input shaft.
8. Align the holes of the gearbox with the engine and hand
start a bolt with a washer (1) on each side of the cou-
pling, going back and forth until all bolts with a washer
are installed.
83090610 5
48144050 25/08/2017
10.1 [10.001] / 15