This service manual provides information on servicing various components of motor graders, including the transmission, front and rear axle systems, brakes, hydraulics, frames, steering, cab climate control, electrical systems, dozer blade, and tools. It contains sections covering safety procedures for working on batteries and electrical systems, as well as specifications and repair instructions for individual parts.
Case 865 b vhp motor grader service repair manualfusjejfjskekemm
This service manual provides information for servicing motor graders, including the 845B, 865B, and 885B models. It covers key components and systems such as the transmission, front and rear axles, brakes, hydraulics, frames, steering, climate control, electrical systems, and dozer blade/arm. Safety warnings are also provided regarding working with batteries and the variable displacement pump. The manual is intended to guide service technicians in properly maintaining and repairing components to ensure safe and reliable operation.
New holland t9.435 cvt, tier 4 b tractor service repair manual [jeez00000ff40...ufjjjdfkksemme
This document is a service manual for New Holland T9 tractor models 435 through 700 from model years 2017 and later that meet Tier 4B emissions standards. It contains information on engine systems, transmission, axles, hydraulics, electrical systems, and other components. The manual is intended to be used by dealership personnel for repair and maintenance of the tractors.
New holland t9.480 powershift, tier 4 b tractor service repair manual [jeez00...udfjjsjejkksemm
This document is a service manual for New Holland T9 tractor models from 435 to 700 horsepower that comply with Tier 4B emissions standards. It contains information on engine systems, transmission, axles, brakes, hydraulics, electrical systems, and other components. The manual is intended for use by dealership personnel for repair and maintenance of the tractors.
Case 865 b awd motor grader service repair manualfujsjfkkskem
This document is a service manual that provides information for servicing motor graders. It includes sections on the transmission, front and rear axle systems, brakes and controls, hydraulic systems, frames and ballasting, steering, cab climate control, electrical systems, dozer blade and arm, and tools. Safety information is provided at the beginning regarding working on electrical components and disconnecting batteries. The manual contains detailed specifications and procedures for maintenance and repair of components.
Case 845 b vhp motor grader service repair manualfujsjefjskkem
This service manual provides information for servicing motor graders, including the 845B, 865B, and 885B models. It covers key components and systems such as the transmission, front and rear axles, brakes, hydraulics, frames, steering, climate control, electrical systems, and dozer blade/arm. Safety warnings are also provided regarding working with batteries and the variable displacement pump. The manual is intended to guide service technicians in properly maintaining and repairing components to ensure safe and reliable operation.
Case 885 b awd motor grader service repair manualfujsjefkkkemme
This document is a service manual that provides information for servicing motor graders. It includes sections on the transmission, front and rear axle systems, brakes and controls, hydraulic systems, frames and ballasting, steering, cab climate control, electrical systems, dozer blade and arm, tools, and safety rules related to working on batteries. The manual contains detailed descriptions and diagrams to assist technicians with maintenance, repairs, and inspections of the various components.
Case 885 b vhp motor grader service repair manualfujsjefkkkemme
This service manual provides information for servicing motor graders, including the 845B, 865B, and 885B models. It covers key components and systems such as the transmission, front and rear axles, brakes, hydraulics, frames, steering, climate control, electrical systems, and dozer blade/arm. Safety warnings are also provided regarding working with batteries and the variable displacement pump. The manual is intended to guide service technicians in properly maintaining and repairing components to ensure safe and reliable operation.
Case 865 b vhp motor grader service repair manualdfujsjefjkskemm
This service manual provides information for servicing motor graders, including the 845B, 865B, and 885B models. It covers key components and systems such as the transmission, front and rear axles, brakes, hydraulics, frames, steering, climate control, electrical systems, and dozer blade/arm. Safety warnings are also provided regarding working with batteries and the variable displacement pump. The manual is intended to guide service technicians in properly maintaining and repairing components to ensure safe and reliable operation.
Case 865 b vhp motor grader service repair manualfusjejfjskekemm
This service manual provides information for servicing motor graders, including the 845B, 865B, and 885B models. It covers key components and systems such as the transmission, front and rear axles, brakes, hydraulics, frames, steering, climate control, electrical systems, and dozer blade/arm. Safety warnings are also provided regarding working with batteries and the variable displacement pump. The manual is intended to guide service technicians in properly maintaining and repairing components to ensure safe and reliable operation.
New holland t9.435 cvt, tier 4 b tractor service repair manual [jeez00000ff40...ufjjjdfkksemme
This document is a service manual for New Holland T9 tractor models 435 through 700 from model years 2017 and later that meet Tier 4B emissions standards. It contains information on engine systems, transmission, axles, hydraulics, electrical systems, and other components. The manual is intended to be used by dealership personnel for repair and maintenance of the tractors.
New holland t9.480 powershift, tier 4 b tractor service repair manual [jeez00...udfjjsjejkksemm
This document is a service manual for New Holland T9 tractor models from 435 to 700 horsepower that comply with Tier 4B emissions standards. It contains information on engine systems, transmission, axles, brakes, hydraulics, electrical systems, and other components. The manual is intended for use by dealership personnel for repair and maintenance of the tractors.
Case 865 b awd motor grader service repair manualfujsjfkkskem
This document is a service manual that provides information for servicing motor graders. It includes sections on the transmission, front and rear axle systems, brakes and controls, hydraulic systems, frames and ballasting, steering, cab climate control, electrical systems, dozer blade and arm, and tools. Safety information is provided at the beginning regarding working on electrical components and disconnecting batteries. The manual contains detailed specifications and procedures for maintenance and repair of components.
Case 845 b vhp motor grader service repair manualfujsjefjskkem
This service manual provides information for servicing motor graders, including the 845B, 865B, and 885B models. It covers key components and systems such as the transmission, front and rear axles, brakes, hydraulics, frames, steering, climate control, electrical systems, and dozer blade/arm. Safety warnings are also provided regarding working with batteries and the variable displacement pump. The manual is intended to guide service technicians in properly maintaining and repairing components to ensure safe and reliable operation.
Case 885 b awd motor grader service repair manualfujsjefkkkemme
This document is a service manual that provides information for servicing motor graders. It includes sections on the transmission, front and rear axle systems, brakes and controls, hydraulic systems, frames and ballasting, steering, cab climate control, electrical systems, dozer blade and arm, tools, and safety rules related to working on batteries. The manual contains detailed descriptions and diagrams to assist technicians with maintenance, repairs, and inspections of the various components.
Case 885 b vhp motor grader service repair manualfujsjefkkkemme
This service manual provides information for servicing motor graders, including the 845B, 865B, and 885B models. It covers key components and systems such as the transmission, front and rear axles, brakes, hydraulics, frames, steering, climate control, electrical systems, and dozer blade/arm. Safety warnings are also provided regarding working with batteries and the variable displacement pump. The manual is intended to guide service technicians in properly maintaining and repairing components to ensure safe and reliable operation.
Case 865 b vhp motor grader service repair manualdfujsjefjkskemm
This service manual provides information for servicing motor graders, including the 845B, 865B, and 885B models. It covers key components and systems such as the transmission, front and rear axles, brakes, hydraulics, frames, steering, climate control, electrical systems, and dozer blade/arm. Safety warnings are also provided regarding working with batteries and the variable displacement pump. The manual is intended to guide service technicians in properly maintaining and repairing components to ensure safe and reliable operation.
Case 865 b awd motor grader service repair manualfsjefjskekmm
This service manual provides information for servicing motor graders, including the 845B, 865B, and 885B models. It covers key components and systems such as the transmission, front and rear axles, brakes, hydraulics, frames, steering, climate control, electrical systems, and dozer blade/arm. Safety warnings are also provided regarding working with batteries and the variable displacement pump. The manual is intended to guide service technicians in properly maintaining and repairing components to ensure safe and reliable operation.
Case 885 b awd motor grader service repair manualufjjjsefkskem
This service manual provides information for servicing motor graders, including the 845B, 865B, and 885B models. It covers key components and systems such as the transmission, front and rear axles, brakes, hydraulics, frames, steering, climate control, electrical systems, and dozer blade/arm. Safety warnings are also provided regarding working with batteries and the variable displacement pump. The manual is intended to guide service technicians in properly maintaining and repairing components to ensure safe and reliable operation.
Case 865 b vhp motor grader service repair manualfujsjekfkskemm
This document is a service manual that provides information for servicing motor graders. It includes sections on the transmission, front and rear axle systems, brakes and controls, hydraulic systems, frames and ballasting, steering, cab climate control, electrical systems, dozer blade and arm, tools, and safety rules related to working on batteries. The manual contains detailed descriptions and diagrams to assist technicians with maintenance, repairs, and inspections of the various components.
Case 865 b awd motor grader service repair manualfusjejfjsekfkem
This service manual provides information for servicing motor graders, including the 845B, 865B, and 885B models. It covers key components and systems such as the transmission, front and rear axles, brakes, hydraulics, frames, steering, climate control, electrical systems, and dozer blade/arm. Safety warnings are also provided regarding working with batteries and the variable displacement pump. The manual is intended to guide service technicians in properly maintaining and repairing components to ensure safe and reliable operation.
Case 885 b vhp motor grader service repair manualufjjjsefkskem
This service manual provides information for servicing motor graders, including the 845B, 865B, and 885B models. It covers key components and systems such as the transmission, front and rear axles, brakes, hydraulics, frames, steering, climate control, electrical systems, and dozer blade/arm. Safety warnings are also provided regarding working with batteries and the variable displacement pump. The manual is intended to guide service technicians in properly maintaining and repairing components to ensure safe and reliable operation.
Case 845 b vhp motor grader service repair manualfujjsefkksemmm
This document is a service manual that provides information for servicing motor graders. It includes sections on the transmission, front and rear axle systems, brakes and controls, hydraulic systems, frames and ballasting, steering, cab climate control, electrical systems, dozer blade and arm, tools, and safety rules related to working on batteries. The manual contains detailed information on components, with references to specific part numbers to aid technicians in maintenance and repairs.
Case ih magnum 380 continuously variable transmission (cvt) tier 4 b tractor ...fhsjejfksemm
This document is a service manual for several Magnum tractor models made by Case IH. It provides information on servicing and repairing components of the tractors, including the engine, transmission, axles, hydraulics, electrical systems, cab, and other parts. The manual is intended for qualified service technicians and includes safety warnings and product identification information.
Case ih magnum 280 continuously variable transmission (cvt) tier 4 b tractor ...fujsekfkksemm
This document is a service manual for Case IH Magnum 250-380 CVT tractors from model years 2017-present. It provides detailed technical information on the engine, transmission, axles, hydraulics, steering, brakes, electrical systems, and other components to assist technicians with repairs and maintenance. The manual is published by CNH Industrial and is intended for use by authorized service technicians.
Case ih magnum 250 continuously variable transmission (cvt) tier 4 b tractor ...fhsjejfksemm
This document is a service manual for Case IH Magnum 250-380 CVT tractors from model years 2017-present. It provides detailed technical information on the engine, transmission, axles, hydraulics, steering, brakes, electrical systems, and other components to assist technicians with repairs and maintenance. The manual is published by CNH Industrial and is intended for use by authorized service technicians.
Case ih magnum 340 rowtrac continuously variable transmission (cvt) tier 4 b ...fujsefkskemm
This document is a service manual for several Magnum tractor models made by Case IH. It provides information on servicing and repairing components of the tractors, including the engine, transmission, axles, hydraulics, electrical systems, cab, and other parts. The manual is intended for qualified service technicians and includes safety warnings and product identification information.
Case ih magnum 340 continuously variable transmission (cvt) tier 4 b tractor ...fujsekfksmemer
This document is a service manual for several Magnum tractor models and variants produced by CNH Industrial. It provides technical specifications, diagrams, and repair procedures for the engine, transmission, axles, hydraulics, electrical systems, cab, and other components. Safety precautions are outlined for personal safety during maintenance and repair work. The manual is intended for qualified service technicians.
Case ih magnum 380 rowtrac continuously variable transmission (cvt) tier 4 b ...fjjskkemsmee
This document is a service manual for Case IH Magnum 250-380 CVT tractors from model years 2017-present. It provides detailed technical information on the engine, transmission, axles, hydraulics, steering, brakes, electrical systems, and other components to assist technicians with repairs and maintenance. The manual is published by CNH Industrial and is intended for use by authorized service technicians.
Case ih magnum 310 continuously variable transmission (cvt) tier 4 b tractor ...fjjsekkksmeik
This document is a service manual for Case IH Magnum tractors and rowtrac tractors with continuously variable transmissions (CVT) and Tier 4B engines. It provides information on engine systems, power coupling, transmission, four-wheel drive systems, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, hitches and implements, frames and ballasting, steering, wheels, tracks and suspensions, cab climate control, electrical systems, and the platform, cab, bodywork and decals. The manual includes an introduction, table of contents listing the various systems, and sections providing maintenance and repair information for each system.
Case ih magnum 340 continuously variable transmission (cvt) tier 4 b tractor ...fujsefkskemm
This document is a service manual for Case IH Magnum 250-380 CVT tractors from model years 2017-present. It provides detailed technical information on the engine, transmission, axles, hydraulics, steering, brakes, electrical systems, and other components to assist technicians with repairs and maintenance. The manual is published by CNH Industrial and is intended for use by authorized service technicians.
Case ih magnum 310 rowtrac continuously variable transmission (cvt) tier 4 b ...fujsekksmem
This document is a service manual for Case IH Magnum tractors and rowtrac tractors with continuously variable transmissions (CVT) and Tier 4B engines. It provides information on engine systems, power coupling, transmission, four-wheel drive systems, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, hitches and implements, frames and ballasting, steering, wheels, tracks and suspensions, cab climate control, electrical systems, and the platform, cab, bodywork and decals. The manual includes an introduction, table of contents listing the various systems, and sections providing specifications and maintenance/repair instructions for each system.
Case ih quantum 95 f tractor service repair manualufjjsjekkeemme
This document provides an introduction and safety guidelines for servicing tractors. It lists general safety rules including wearing proper protective equipment, disconnecting batteries before servicing, and avoiding working on running equipment. Precautions are given for fueling, lifting, towing, and working in confined spaces or on slopes. Following basic safety practices can help avoid accidents in the workshop.
Case ih quantum 85 f tractor service repair manualudfujjsejkkem
This document provides an introduction and safety guidelines for servicing tractors. It lists general safety rules including wearing proper protective equipment, disconnecting batteries before servicing, and avoiding working on running equipment. Precautions are given for fueling, lifting, towing, transporting, and working on sloped surfaces. Following the fundamental safety regulations can help avoid accidents in the workshop.
Case ih quantum 85 f tractor service repair manualkfdjkskdmm
This document is a service manual for Quantum tractors that contains part numbers and engine specifications for various Quantum tractor models. It includes an overview of the tractor systems covered in the manual such as the engine, transmission, axles, hydraulics, steering, brakes, electrical systems and more. The table of contents lists the section numbers and titles for each system covered.
Case ih quantum 105 f tractor service repair manualfjskekqaswdmmem
This document provides an introduction and safety guidelines for servicing tractors. It lists general safety rules including wearing proper protective equipment, disconnecting batteries before servicing, and avoiding working on running equipment. Precautions are given for fueling, lifting, towing, and working in confined spaces or with bystanders present. Following the fundamental safety regulations outlined can help avoid accidents in the workshop.
Case ih quantum 75 f tractor service repair manualudfujjsejkkem
This document is a service manual for Quantum tractors that includes part numbers and engine specifications. It provides an overview of the manual's contents which cover systems of the tractor such as the engine, transmission, brakes, hydraulics, electrical systems, and more. Each system includes sections that describe components, operation, and repair procedures. Product models covered include the Quantum 75F, 85F, 95F, and 105F tractors.
Yamaha 150 aet, c150tr outboard service repair manual l 305521 fjkskekkemmmd
This document is a service manual that provides information for servicing various Yamaha outboard motor models. It contains chapters covering general information, specifications, periodic inspections and adjustments, fuel system, power unit, lower unit, bracket unit, electrical systems, and trouble analysis. The general information chapter discusses identification, safety practices, tools, and assembly/disassembly procedures. It also provides a detailed list of special tools recommended for servicing tasks, including tools for measuring components, removing and installing parts like bearings and seals.
More Related Content
Similar to Case 885 b vhp motor grader service repair manual
Case 865 b awd motor grader service repair manualfsjefjskekmm
This service manual provides information for servicing motor graders, including the 845B, 865B, and 885B models. It covers key components and systems such as the transmission, front and rear axles, brakes, hydraulics, frames, steering, climate control, electrical systems, and dozer blade/arm. Safety warnings are also provided regarding working with batteries and the variable displacement pump. The manual is intended to guide service technicians in properly maintaining and repairing components to ensure safe and reliable operation.
Case 885 b awd motor grader service repair manualufjjjsefkskem
This service manual provides information for servicing motor graders, including the 845B, 865B, and 885B models. It covers key components and systems such as the transmission, front and rear axles, brakes, hydraulics, frames, steering, climate control, electrical systems, and dozer blade/arm. Safety warnings are also provided regarding working with batteries and the variable displacement pump. The manual is intended to guide service technicians in properly maintaining and repairing components to ensure safe and reliable operation.
Case 865 b vhp motor grader service repair manualfujsjekfkskemm
This document is a service manual that provides information for servicing motor graders. It includes sections on the transmission, front and rear axle systems, brakes and controls, hydraulic systems, frames and ballasting, steering, cab climate control, electrical systems, dozer blade and arm, tools, and safety rules related to working on batteries. The manual contains detailed descriptions and diagrams to assist technicians with maintenance, repairs, and inspections of the various components.
Case 865 b awd motor grader service repair manualfusjejfjsekfkem
This service manual provides information for servicing motor graders, including the 845B, 865B, and 885B models. It covers key components and systems such as the transmission, front and rear axles, brakes, hydraulics, frames, steering, climate control, electrical systems, and dozer blade/arm. Safety warnings are also provided regarding working with batteries and the variable displacement pump. The manual is intended to guide service technicians in properly maintaining and repairing components to ensure safe and reliable operation.
Case 885 b vhp motor grader service repair manualufjjjsefkskem
This service manual provides information for servicing motor graders, including the 845B, 865B, and 885B models. It covers key components and systems such as the transmission, front and rear axles, brakes, hydraulics, frames, steering, climate control, electrical systems, and dozer blade/arm. Safety warnings are also provided regarding working with batteries and the variable displacement pump. The manual is intended to guide service technicians in properly maintaining and repairing components to ensure safe and reliable operation.
Case 845 b vhp motor grader service repair manualfujjsefkksemmm
This document is a service manual that provides information for servicing motor graders. It includes sections on the transmission, front and rear axle systems, brakes and controls, hydraulic systems, frames and ballasting, steering, cab climate control, electrical systems, dozer blade and arm, tools, and safety rules related to working on batteries. The manual contains detailed information on components, with references to specific part numbers to aid technicians in maintenance and repairs.
Case ih magnum 380 continuously variable transmission (cvt) tier 4 b tractor ...fhsjejfksemm
This document is a service manual for several Magnum tractor models made by Case IH. It provides information on servicing and repairing components of the tractors, including the engine, transmission, axles, hydraulics, electrical systems, cab, and other parts. The manual is intended for qualified service technicians and includes safety warnings and product identification information.
Case ih magnum 280 continuously variable transmission (cvt) tier 4 b tractor ...fujsekfkksemm
This document is a service manual for Case IH Magnum 250-380 CVT tractors from model years 2017-present. It provides detailed technical information on the engine, transmission, axles, hydraulics, steering, brakes, electrical systems, and other components to assist technicians with repairs and maintenance. The manual is published by CNH Industrial and is intended for use by authorized service technicians.
Case ih magnum 250 continuously variable transmission (cvt) tier 4 b tractor ...fhsjejfksemm
This document is a service manual for Case IH Magnum 250-380 CVT tractors from model years 2017-present. It provides detailed technical information on the engine, transmission, axles, hydraulics, steering, brakes, electrical systems, and other components to assist technicians with repairs and maintenance. The manual is published by CNH Industrial and is intended for use by authorized service technicians.
Case ih magnum 340 rowtrac continuously variable transmission (cvt) tier 4 b ...fujsefkskemm
This document is a service manual for several Magnum tractor models made by Case IH. It provides information on servicing and repairing components of the tractors, including the engine, transmission, axles, hydraulics, electrical systems, cab, and other parts. The manual is intended for qualified service technicians and includes safety warnings and product identification information.
Case ih magnum 340 continuously variable transmission (cvt) tier 4 b tractor ...fujsekfksmemer
This document is a service manual for several Magnum tractor models and variants produced by CNH Industrial. It provides technical specifications, diagrams, and repair procedures for the engine, transmission, axles, hydraulics, electrical systems, cab, and other components. Safety precautions are outlined for personal safety during maintenance and repair work. The manual is intended for qualified service technicians.
Case ih magnum 380 rowtrac continuously variable transmission (cvt) tier 4 b ...fjjskkemsmee
This document is a service manual for Case IH Magnum 250-380 CVT tractors from model years 2017-present. It provides detailed technical information on the engine, transmission, axles, hydraulics, steering, brakes, electrical systems, and other components to assist technicians with repairs and maintenance. The manual is published by CNH Industrial and is intended for use by authorized service technicians.
Case ih magnum 310 continuously variable transmission (cvt) tier 4 b tractor ...fjjsekkksmeik
This document is a service manual for Case IH Magnum tractors and rowtrac tractors with continuously variable transmissions (CVT) and Tier 4B engines. It provides information on engine systems, power coupling, transmission, four-wheel drive systems, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, hitches and implements, frames and ballasting, steering, wheels, tracks and suspensions, cab climate control, electrical systems, and the platform, cab, bodywork and decals. The manual includes an introduction, table of contents listing the various systems, and sections providing maintenance and repair information for each system.
Case ih magnum 340 continuously variable transmission (cvt) tier 4 b tractor ...fujsefkskemm
This document is a service manual for Case IH Magnum 250-380 CVT tractors from model years 2017-present. It provides detailed technical information on the engine, transmission, axles, hydraulics, steering, brakes, electrical systems, and other components to assist technicians with repairs and maintenance. The manual is published by CNH Industrial and is intended for use by authorized service technicians.
Case ih magnum 310 rowtrac continuously variable transmission (cvt) tier 4 b ...fujsekksmem
This document is a service manual for Case IH Magnum tractors and rowtrac tractors with continuously variable transmissions (CVT) and Tier 4B engines. It provides information on engine systems, power coupling, transmission, four-wheel drive systems, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, hitches and implements, frames and ballasting, steering, wheels, tracks and suspensions, cab climate control, electrical systems, and the platform, cab, bodywork and decals. The manual includes an introduction, table of contents listing the various systems, and sections providing specifications and maintenance/repair instructions for each system.
Case ih quantum 95 f tractor service repair manualufjjsjekkeemme
This document provides an introduction and safety guidelines for servicing tractors. It lists general safety rules including wearing proper protective equipment, disconnecting batteries before servicing, and avoiding working on running equipment. Precautions are given for fueling, lifting, towing, and working in confined spaces or on slopes. Following basic safety practices can help avoid accidents in the workshop.
Case ih quantum 85 f tractor service repair manualudfujjsejkkem
This document provides an introduction and safety guidelines for servicing tractors. It lists general safety rules including wearing proper protective equipment, disconnecting batteries before servicing, and avoiding working on running equipment. Precautions are given for fueling, lifting, towing, transporting, and working on sloped surfaces. Following the fundamental safety regulations can help avoid accidents in the workshop.
Case ih quantum 85 f tractor service repair manualkfdjkskdmm
This document is a service manual for Quantum tractors that contains part numbers and engine specifications for various Quantum tractor models. It includes an overview of the tractor systems covered in the manual such as the engine, transmission, axles, hydraulics, steering, brakes, electrical systems and more. The table of contents lists the section numbers and titles for each system covered.
Case ih quantum 105 f tractor service repair manualfjskekqaswdmmem
This document provides an introduction and safety guidelines for servicing tractors. It lists general safety rules including wearing proper protective equipment, disconnecting batteries before servicing, and avoiding working on running equipment. Precautions are given for fueling, lifting, towing, and working in confined spaces or with bystanders present. Following the fundamental safety regulations outlined can help avoid accidents in the workshop.
Case ih quantum 75 f tractor service repair manualudfujjsejkkem
This document is a service manual for Quantum tractors that includes part numbers and engine specifications. It provides an overview of the manual's contents which cover systems of the tractor such as the engine, transmission, brakes, hydraulics, electrical systems, and more. Each system includes sections that describe components, operation, and repair procedures. Product models covered include the Quantum 75F, 85F, 95F, and 105F tractors.
Similar to Case 885 b vhp motor grader service repair manual (20)
Yamaha 150 aet, c150tr outboard service repair manual l 305521 fjkskekkemmmd
This document is a service manual that provides information for servicing various Yamaha outboard motor models. It contains chapters covering general information, specifications, periodic inspections and adjustments, fuel system, power unit, lower unit, bracket unit, electrical systems, and trouble analysis. The general information chapter discusses identification, safety practices, tools, and assembly/disassembly procedures. It also provides a detailed list of special tools recommended for servicing tasks, including tools for measuring components, removing and installing parts like bearings and seals.
Yamaha 50 geto outboard service repair manual l 400805 fjkskekkemmmd
This document is a service manual that provides specifications, inspection and adjustment procedures, troubleshooting information, and general information for maintaining various Yamaha outboard motor models. It lists special tools that are recommended for accurate assembly, adjustment, and repair of the motors. These include tools for measuring idle speed, ignition and electrical systems, fuel components, lower unit components, pinion and forward gearcase shimming, and more. Proper tools and safety practices are emphasized to protect parts from damage during disassembly and reassembly.
Yale a875 gdp040 060 rg-tg-zg lift truck service repair manualfjkskekkemmmd
This document provides a service manual for repairing and maintaining various components of a forklift. It includes sections on repairing the operator module, frame, hood, side covers, and other parts. Safety warnings are provided for putting the forklift on blocks during maintenance. Descriptions and procedures are given for removing and installing the operator module, hood, side covers, and other components.
Valtra valmet 6000 tractor service repair manualfjkskekkemmmd
This document is a workshop manual for Valtra tractors models 6000-8950. It provides:
1) An overview of the manual's organization into groups and components with three-digit code designations to identify pages.
2) Instructions for inserting new and updated pages based on the code designations.
3) A list of the code designations for each system covered in the manual (e.g. engine, transmission, brakes, etc.) along with the topics covered on each page.
4) Information on supplements issued with additional instructions, including notes on the topics and date each was published.
Toyota 7 fb10 forklift service repair manualfjkskekkemmmd
The document is an introduction and table of contents for a service manual covering Toyota electric forklifts from 1999. It outlines the vehicle models, components, and maintenance procedures covered in the manual to aid technicians in correctly servicing the forklifts. The manual is intended to be used as a reference for repairs, diagnostics, and specifications for various systems on the listed forklift models.
Toyota 02 5 fd33 forklift service repair manualfjkskekkemmmd
This document provides an overview manual for servicing the Toyota Forklift 5FGi5FD33 - 45 series. It covers service procedures for models produced from 1988 to 1994, with some differences noted for minor changes made in 1994. The manual is compiled from two previous repair manuals and covers topics like vehicle listings, abbreviations, torque specifications, inspection methods and periodic maintenance. It provides general information needed for servicing components of these forklift models.
Toyota 02 5fd10 forklift service repair manualfjkskekkemmmd
This manual provides service procedures for the TOYOTA FORKLIFT 5FG10-30/5FD70-30 Series from August 1986 to August 1989. It covers models with 4P, 4Y, 2J, 1Z, and 7Z engines. The document lists the vehicle models and specifications, provides exterior views of the vehicles, and references repair manuals for the mounted engines. It also includes sections on standard bolt tightening torques, high pressure hose fitting torques, and lists the vehicle frame number format and locations. The manual is intended to help provide quick and correct servicing for the corresponding forklift models.
New holland ls140 skid steer loader parts catalogue manualfjkskekkemmmd
This document is a parts catalog for New Holland LS140 and LS150 loaders. It contains over 200 pages detailing all engine, hydraulic, electrical, sheet metal, and other parts. The catalog includes pictorial indexes, part numbers, descriptions and applies to models LS140 and LS150.
New holland c185 skid steer (compact track loader) parts catalogue manualfjkskekkemmmd
This document is a parts catalog for L185/C185 Skid Steer/Compact Track Loaders. It contains:
- A table of contents listing the sections and parts included
- Revision history information
- Sections covering the engine and its components, fuel system, electrical system, powertrain, brakes, hydraulics, and chassis/attachments
- An index for locating specific parts
The parts catalog provides exploded views and part numbers for replacing or repairing parts for L185/C185 Skid Steer/Compact Track Loaders. It is intended as a reference for technicians and operators to service and maintain the machines.
Mitsubishi fd40 n forklift trucks service repair manual sn ef12b 00011-upfjkskekkemmmd
This chapter of the service manual provides information about the cooling system for a range of forklift models. It includes specifications, an overview of cooling system components, instructions for removing and installing the fan belt, and procedures for inspecting and adjusting the radiator, hoses, coolant, and other parts. Troubleshooting tips are also provided. The key aspects covered are removing and installing the fan belt, inspecting the radiator and hoses, checking the coolant, and troubleshooting common cooling system issues.
Mercury mer cruiser blackhawk stern drive unit 1994 service repair manualfjkskekkemmmd
This document is a service manual section covering general information about a Blackhawk Stern Drive Unit. It includes directions on how to use the manual, defines common terms, and provides important safety information. Specifically, it outlines the 10-hour break-in period for new or rebuilt drive units, serial number location, differences between the Blackhawk and Bravo drive units, and instructions for converting a Bravo transom to the high-performance Blackhawk version.
Kioti daedong dk35 tractor service repair manualfjkskekkemmmd
The document provides general information about tractors, including:
- Tightening torque specifications for standard bolts and nuts of different sizes
- Identification information like engine and chassis serial numbers
- Specifications for engine, transmission, hydraulic system, dimensions, and other components for different tractor models
- Maintenance instructions and a regular check list for items to inspect at various hourly intervals.
Kioti daedong ck20 tractor service repair manualfjkskekkemmmd
This document provides an overview of safety information and maintenance procedures for a tractor. It discusses safety precautions for starting the engine, servicing, working on the tractor, avoiding fires, disposing of fluids properly, ventilating work areas, preventing acid burns, and preparing for emergencies. It also provides an overview of the safety decals installed on the tractor and care instructions for labels. The document directs the reader to subsequent chapters that describe the mechanisms, troubleshooting, specifications, and servicing procedures for various tractor components in detail.
Jcb 525 58 telescopic handler service repair manual all561001 onwardsfjkskekkemmmd
This document provides specifications for fluids, lubricants, capacities and torque settings for various JCB machine models including 525, 527, 530, 535 and 537 models. It specifies the recommended engine oil, transmission fluid, hydraulic fluid, grease, coolant and other fluids to use in the machines, along with their capacities. It also provides torque settings for fasteners and notes that new engines do not require a break-in period and should be used immediately in normal work cycles.
Jcb 505 19 telescopic handler service repair manual all561001-579365fjkskekkemmmd
This document provides fluid, lubricant and specification information for various JCB machines:
- Lists recommended engine oils, transmission fluids, hydraulic fluids, gear oils, greases and other specifications for 505-19/22, 506-36, 508-40, 510-40 and 506B machines.
- Notes that new engines do not require a running-in period and should be used immediately in normal work cycles to avoid glazing. The first engine oil should be changed after 100 hours.
- Provides coolant mixture recommendations and capacities for hydraulic tanks, transmission systems, axles and other components.
Case 2050 m stage iiib crawler dozer service repair manual (pin nfdc20000 and...fjkskekkemmmd
This document is a service manual for CNH Industrial 2050M Stage IIIB crawler dozers with various undercarriage configurations. It provides maintenance and repair information for major systems including the engine, hydrostatic drive, brakes and controls, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, and electrical systems. The manual includes over 50 sections covering components, operation, and troubleshooting guidelines.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
The Octavia range embodies the design trend of the Škoda brand: a fusion of
aesthetics, safety and practicality. Whether you see the car as a whole or step
closer and explore its unique features, the Octavia range radiates with the
harmony of functionality and emotion
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
2. SERVICE MANUAL
845B Direct drive transmission, Tier 3, made in Brazil [HBZN0845VBAF00184
- ], 845B Torque converter transmission, Tier 3, made in Brazil
[HBZN0845VCAF01093 - ], 865B Direct drive transmission, Tier 3, made in
Brazil [NBAF15000 - ], 865B Torque converter transmission, Tier 3,made in
Brazil [NBAF14004 - ], 865B AWD Direct drive transmission, All wheel drive
(AWD), Tier 3, made in Brazil [HBZN0865TBAF00840 - ], 885B Direct drive
transmission, Tier 3, made in Brazil [HBZN0885LBAF00098 - ], 885B Torque
converter transmission, Tier 3, made in Brazil [HBZN0885PCAF00871 - ],
885B AWD Direct drive transmission, All wheel drive (AWD), Tier 3, made
in Brazil [HBZN0885TBAF00558 - ]
48050419D 06/10/2017
EN
3. Link Product / Engine
Product Market Product Engine
845B Transmissão de acionamento
direto, Tier 3, produzido no Brasil
[HBZN0845VBAF00184 - ]
Australia New Zealand F4HE9687W*J101
845B Transmissão de acionamento
direto, Tier 3, produzido no Brasil
[HBZN0845VBAF00184 - ]
Latin America F4HE9687W*J101
845B Transmissão de acionamento
direto, Tier 3, produzido no Brasil
[HBZN0845VBAF00184 - ]
Asia Pacific F4HE9687W*J101
845B Transmissão de acionamento
direto, Tier 3, produzido no Brasil
[HBZN0845VBAF00184 - ]
Middle East Africa F4HE9687W*J101
845B Transmissão de acionamento
direto, Tier 3, produzido no Brasil
[HBZN0845VBAF00184 - ]
North America F4HE9687W*J101
845B Transmissão do conversor
de torque, Tier 3, produzido no
Brasil [HBZN0845VCAF01093 - ]
Australia New Zealand F4HE9687W*J101
845B Transmissão do conversor
de torque, Tier 3, produzido no
Brasil [HBZN0845VCAF01093 - ]
North America F4HE9687W*J101
845B Transmissão do conversor
de torque, Tier 3, produzido no
Brasil [HBZN0845VCAF01093 - ]
Latin America F4HE9687W*J101
845B Transmissão do conversor
de torque, Tier 3, produzido no
Brasil [HBZN0845VCAF01093 - ]
Asia Pacific F4HE9687W*J101
845B Transmissão do conversor
de torque, Tier 3, produzido no
Brasil [HBZN0845VCAF01093 - ]
Middle East Africa F4HE9687W*J101
865B Transmissão de acionamento
direto, Tier 3, produzido no Brasil
[NBAF15000 - ]
Latin America F4HE9687C*J100
865B Transmissão de acionamento
direto, Tier 3, produzido no Brasil
[NBAF15000 - ]
Australia New Zealand F4HE9687C*J100
865B Transmissão de acionamento
direto, Tier 3, produzido no Brasil
[NBAF15000 - ]
Asia Pacific F4HE9687C*J100
865B Transmissão de acionamento
direto, Tier 3, produzido no Brasil
[NBAF15000 - ]
Middle East Africa F4HE9687C*J100
865B Transmissão de acionamento
direto, Tier 3, produzido no Brasil
[NBAF15000 - ]
North America F4HE9687C*J100
865B Transmissão do conversor
de torque, Tier 3, produzido no
Brasil [NBAF14004 - ]
Asia Pacific F4HE9687C*J100
48050419D 06/10/2017
4. Product Market Product Engine
865B Transmissão do conversor
de torque, Tier 3, produzido no
Brasil [NBAF14004 - ]
North America F4HE9687C*J100
865B Transmissão do conversor
de torque, Tier 3, produzido no
Brasil [NBAF14004 - ]
Australia New Zealand F4HE9687C*J100
865B Transmissão do conversor
de torque, Tier 3, produzido no
Brasil [NBAF14004 - ]
Middle East Africa F4HE9687C*J100
865B Transmissão do conversor
de torque, Tier 3, produzido no
Brasil [NBAF14004 - ]
Latin America F4HE9687C*J100
865B AWD Transmissão de
acionamento direto, tração
em todas as rodas (AWD),
Tier 3, produzido no Brasil
[HBZN0865TBAF00840 - ]
North America F4HE9687C*J100
885B Transmissão de acionamento
direto, Tier 3, produzido no Brasil
[HBZN0885LBAF00098 - ]
Middle East Africa F4HE9684L*J100
885B Transmissão de acionamento
direto, Tier 3, produzido no Brasil
[HBZN0885LBAF00098 - ]
Latin America F4HE9684L*J100
885B Transmissão de acionamento
direto, Tier 3, produzido no Brasil
[HBZN0885LBAF00098 - ]
North America F4HE9684L*J100
885B Transmissão de acionamento
direto, Tier 3, produzido no Brasil
[HBZN0885LBAF00098 - ]
Asia Pacific F4HE9684L*J100
885B Transmissão de acionamento
direto, Tier 3, produzido no Brasil
[HBZN0885LBAF00098 - ]
Australia New Zealand F4HE9684L*J100
885B Transmissão do conversor
de torque, Tier 3, produzido no
Brasil [HBZN0885PCAF00871 - ]
Australia New Zealand F4HE9687K*J105
885B Transmissão do conversor
de torque, Tier 3, produzido no
Brasil [HBZN0885PCAF00871 - ]
Middle East Africa F4HE9687K*J105
885B Transmissão do conversor
de torque, Tier 3, produzido no
Brasil [HBZN0885PCAF00871 - ]
Latin America F4HE9687K*J105
885B Transmissão do conversor
de torque, Tier 3, produzido no
Brasil [HBZN0885PCAF00871 - ]
North America F4HE9687K*J105
885B Transmissão do conversor
de torque, Tier 3, produzido no
Brasil [HBZN0885PCAF00871 - ]
Asia Pacific F4HE9687K*J105
885B AWD Transmissão de
acionamento direto, tração
em todas as rodas (AWD),
Tier 3, produzido no Brasil
[HBZN0885TBAF00558 - ]
North America F4HE9684L*J100
48050419D 06/10/2017
5. Contents
INTRODUCTION
Transmission.............................................................................. 21
[21.113] Powershift transmission ............................................................ 21.1
[21.135] Powershift transmission external controls.......................................... 21.2
[21.105] Powershift transmission hydraulic components.................................... 21.3
[21.155] Powershift transmission internal components...................................... 21.4
[21.700] Torque converter ................................................................... 21.5
[21.900] Hydraulic pump drive............................................................... 21.6
Front axle system ....................................................................... 25
[25.108] Final drive hub, steering knuckles, and shafts ..................................... 25.1
[25.400] Non-powered front axle ............................................................ 25.2
Rear axle system........................................................................ 27
[27.100] Powered rear axle.................................................................. 27.1
[27.106] Rear bevel gear set and differential................................................ 27.2
[27.120] Planetary and final drives .......................................................... 27.3
Brakes and controls .................................................................... 33
[33.110] Parking brake or parking lock ...................................................... 33.1
Hydraulic systems....................................................................... 35
[35.000] Hydraulic systems.................................................................. 35.1
Frames and ballasting ................................................................. 39
[39.100] Frame .............................................................................. 39.1
[39.140] Ballasts and supports .............................................................. 39.2
Steering..................................................................................... 41
[41.200] Hydraulic control components...................................................... 41.1
Cab climate control ..................................................................... 50
[50.100] Heating ............................................................................. 50.1
48050419D 06/10/2017
8. INTRODUCTION
Safety rules - Batteries
845B
865B
885B
WARNING
Improper operation or service of this machine can result in an accident.
Before working on any component(s) of the electrical circuit, put the starter switch key in the off (shut
down) position. When disconnecting batteries, always disconnect the negative (-) cable first. When
reconnecting batteries, always connect the negative (-) cable last.
Failure to comply could result in death or serious injury.
W0264A
WARNING
Electrical shock hazard!
Before working on any part of the electrical system, disconnect the battery ground cable. Complete
all electrical work before connecting the cable.
Failure to comply could result in death or serious injury.
W0129A
WARNING
Battery gas can explode!
To prevent an explosion: 1. Always disconnect the negative (-) battery cable first. 2. Always connect
the negative (-) battery cable last. 3. Do not short circuit the battery posts with metal objects. 4. Do
not weld, grind, or smoke near a battery.
Failure to comply could result in death or serious injury.
W0011A
WARNING
Explosion hazard!
When jump-starting the machine, connect and disconnect the jumper cables exactly as indicated in
this manual. DO NOT connect the jumper cables to the machine battery terminals. Make sure no
persons are near the connecting points before starting the engine. Start the engine from the operator’s
seat.
Failure to comply could result in death or serious injury.
W0342A
WARNING
Explosive gas!
Batteries emit explosive hydrogen gas and other fumes while charging. Ventilate the charging area.
Keep the battery away from sparks, open flames, and other ignition sources. Never charge a frozen
battery.
Failure to comply could result in death or serious injury.
W0005A
WARNING
Hazardous chemicals!
Battery electrolyte contains sulfuric acid. Contact with skin and eyes could result in severe irritation
and burns. Always wear splash-proof goggles and protective clothing (gloves and aprons). Wash
hands after handling.
Failure to comply could result in death or serious injury.
W0006A
48050419D 06/10/2017
3
9. INTRODUCTION
WARNING
Battery gas can explode!
To prevent an explosion: 1. Always disconnect the negative (-) battery cable first. 2. Always connect
the negative (-) battery cable last. 3. Do not short circuit the battery posts with metal objects. 4. Do
not weld, grind, or smoke near a battery.
Failure to comply could result in death or serious injury.
W0011A
WARNING
Explosion hazard!
If battery electrolyte is frozen, attempting to charge the battery or jump-start the engine can cause the
battery to explode. Always keep batteries at full charge to prevent frozen battery electrolyte. Never
charge a frozen battery.
Failure to comply could result in death or serious injury.
W0203A
WARNING
Improper operation or service of this machine can result in an accident.
An error connecting auxiliary starting cables or short-circuiting battery terminals can cause an acci-
dent. Connect auxiliary starting cables as instructed in this manual.
Failure to comply could result in death or serious injury.
W0263A
WARNING
Explosion hazard!
Batteries emit explosive gases. Always ventilate when using in an enclosed area or when charging.
Keep the battery away from sparks, open flames, and other ignition sources.
Failure to comply could result in death or serious injury.
W0369A
WARNING
Eye injury hazard!
Wear eye protection when jump-starting the machine and when charging the battery.
Failure to comply could result in death or serious injury.
W0382A
WARNING
Chemical hazard!
Battery acid can cause severe burns. Some batteries have a ventilation tube. If there is battery acid
in the tube, this acid can be released when the battery is turned upside down. If you turn the battery
upside down, point the ventilation tube away from you and any other people in the area.
Failure to comply could result in death or serious injury.
W1084A
48050419D 06/10/2017
4
10. INTRODUCTION
Variable displacement pump - Safety rules
845B ANZ --- APAC --- LA --- MEA --- NA
865B AWD Direct drive transmission, All wheel drive (AWD), Tier 3, made
in Brazil [HBZN0865TBAF00840 - ]
NA
865B ANZ --- APAC --- LA --- MEA --- NA
885B AWD Direct drive transmission, All wheel drive (AWD), Tier 3, made
in Brazil [HBZN0885TBAF00558 - ]
NA
885B ANZ --- APAC --- LA --- MEA --- NA
Personal safety
This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all
safety messages that follow this symbol to avoid possible death or injury.
Throughout this manual and on machine safety signs, you will find the signal words DANGER, WARNING, and CAU-
TION followed by special instructions. These precautions are intended for the personal safety of you and those
working with you.
Read and understand all the safety messages in this manual before you operate or service the machine.
DANGER indicates a hazardous situation that, if not avoided, will result in death or serious injury. The color
associated with DANGER is RED.
WARNING indicates a hazardous situation that, if not avoided, could result in death or serious injury. The color
associated with WARNING is ORANGE.
CAUTION indicates a hazardous situation that, if not avoided, could result in minor or moderate injury. The
color associated with CAUTION is YELLOW.
FAILURE TO FOLLOW DANGER, WARNING, AND CAUTION MESSAGES COULD RESULT
IN DEATH OR SERIOUS INJURY.
Machine safety
NOTICE: Notice indicates a situation that, if not avoided, could result in machine damage or property damage. The
color associated with Notice is BLUE.
Throughout this manual you will find the signal word Notice followed by special instructions to prevent machine dam-
age or property damage. The word Notice is used to address practices not related to personal safety.
Information
NOTE: Note indicates additional information that clarifies steps, procedures, or other information in this manual.
Throughout this manual you will find the word Note followed by additional information about a step, procedure, or
other information in the manual. The word Note is not intended to address personal safety or property damage.
48050419D 06/10/2017
5
11. SERVICE MANUAL
Transmission
845B Direct drive transmission, Tier 3, made in Brazil [HBZN0845VBAF00184
- ], 845B Torque converter transmission, Tier 3, made in Brazil
[HBZN0845VCAF01093 - ], 865B Direct drive transmission, Tier 3, made in
Brazil [NBAF15000 - ], 865B Torque converter transmission, Tier 3,made in
Brazil [NBAF14004 - ], 865B AWD Direct drive transmission, All wheel drive
(AWD), Tier 3, made in Brazil [HBZN0865TBAF00840 - ], 885B Direct drive
transmission, Tier 3, made in Brazil [HBZN0885LBAF00098 - ], 885B Torque
converter transmission, Tier 3, made in Brazil [HBZN0885PCAF00871 - ],
885B AWD Direct drive transmission, All wheel drive (AWD), Tier 3, made
in Brazil [HBZN0885TBAF00558 - ]
48050419D 06/10/2017
21
12. Transmission - Powershift transmission
Powershift transmission - Pressure test
845B Torque converter transmission, Tier 3, made in Brazil
[HBZN0845VCAF01093 - ]
(6 x 3 torque converter) OR (Tier 1) OR (Tier 3-VHP)
865B Torque converter transmission, Tier 3,made in Brazil [NBAF14004 - ] (6 x 3 torque converter) OR (Tier 2) OR (Tier 3-VHP) OR (Tier 0)
Measuring points
NOTE: Carry out measurements when the transmission has reached operating temperature(approx. 80 – 90 °C) can
be varied.
LAIL11MG1492F0A 1
48050419D 06/10/2017
21.1 [21.113] / 53
13. Transmission - Powershift transmission
LAIL11MG1493F0A 2
No. Denomination of item Connection
Designation at
valve block
Measuring points for oil pressure and temperature
51 Before the converter (opening pressure) – 11 – 13 bar M10 X 1.0 H
52 Before the converter (opening pressure) – 4.3 – 7.3 bar M10 X 1.0
53 Front clutch (KV) – 16 – 18 bar M10 X 1.0 B
55 Reverse clutch (KR) – 16 – 18 bar M10 X 1.0 AND
56 Clutch (K1) – 16 – 18 bar M10 X 1.0 D
57 Clutch (K2) – 16 – 18 bar M10 X 1.0 A
58 Clutch (K3) – 16 – 18 bar M10 X 1.0 C
60 Clutch (K4) – 16 – 18 bar M10 X 1.0 F
63 After the converter, Temperature 100 °C, short-term 120 °C M14 X 1.5
65 System pressure – 16 – 18.5 bar M10 X 1.0 K
Measuring points for flow rates
15 Connection to heat exchanger 1–5/16 in - 12 UN-2B
16 Connection from heat exchanger 1–5/16 in - 12 UN-2B
Inductive sensor, impulse sensor, speed sensor and switch
21 Inductive sensor – Turbine rotation M18 X 1.5
34 Speed sensor – Output
47 Inductive sensor – Central gear chain M18 X 1.5
48 Inductive sensor – Engine speed M18 X 1.5
54 Differential pressure switch for pressure filter M14 X 1.5
Connecting
10 Vent M10 x 1
49 Plug connection at electro-hydraulic control unit
48050419D 06/10/2017
21.1 [21.113] / 54
14. Transmission - Powershift transmission
Powershift transmission - Service instruction
845B Direct drive transmission, Tier 3, made in Brazil
[HBZN0845VBAF00184 - ]
(8 x 8 direct drive) OR (Tier 1) OR (Tier 3-VHP)
865B AWD Direct drive transmission, All wheel drive (AWD), Tier 3, made
in Brazil [HBZN0865TBAF00840 - ]
865B Direct drive transmission, Tier 3, made in Brazil [NBAF15000 - ] (8 x 8 direct drive) OR (Tier 2) OR (Tier 3-VHP) OR (Tier 0) OR (AWD)
Transmission lifting procedure
1. Use a lift sling similar to (A).
2. It should hold the transmission level without bending
the lift hangers (B).
LAIL11MG2000A0A 1
Repair stand
NOTE: The repair stand (A) used in this manual is an OTC
DIVISION product, part number 1735, and its capacity is
907 kg (2000 lb).
When any other stand is used, consult the Manufac-
turer’s instructions for mounting.
The approximate empty weight is 545 kg (1202 lb).
NOTE: The exact weights depend on the options included.
LAIL11MG1372A0A 2
Fixing the transmission to the repair stand
NOTE: See “Special Tools” for the Assembly Stand Plate
drawings.
LAIL11MG1654A0A 3
48050419D 06/10/2017
21.1 [21.113] / 55
15. Transmission - Powershift transmission
Powershift transmission - Service instruction
885B AWD Direct drive transmission, All wheel drive (AWD), Tier 3, made
in Brazil [HBZN0885TBAF00558 - ]
885B Direct drive transmission, Tier 3, made in Brazil [HBZN0885LBAF00098
- ]
(8 x 8 direct drive) OR (Tier 2) OR (Tier 3-VHP) OR (Tier 0) OR (AWD)
Transmission lifting procedure
1. Use a lift sling similar to (A).
2. It should hold the transmission level without bending
the lift hangers (B).
LAIL11MG2012A0A 1
Repair stand
NOTE: The repair stand (A) used in this manual is an OTC
DIVISION product, part number 1735, and its capacity is
907 kg (2000 lb).
When any other stand is used, consult the Manufac-
turer’s instructions for mounting.
The approximate empty weight is 703 kg (1550 lb).
NOTE: The exact weights depend on the options included.
LAIL11MG2013A0A 2
Fixing the transmission (DF series) to the repair stand
NOTE: See “Special Tools” for the Assembly Stand Plate
drawings.
LAIL11MG1916A0A 3
48050419D 06/10/2017
21.1 [21.113] / 56
16. Transmission - Powershift transmission
Powershift transmission - Disassemble
845B Torque converter transmission, Tier 3, made in Brazil
[HBZN0845VCAF01093 - ]
(6 x 3 torque converter) OR (Tier 1) OR (Tier 3-VHP)
865B Torque converter transmission, Tier 3,made in Brazil [NBAF14004 - ] (6 x 3 torque converter) OR (Tier 2) OR (Tier 3-VHP) OR (Tier 0)
P.T.O.
1. Loosen the hexagonal headed bolts (1) and remove the
cover (2).
LAIL11MG0137A0A 1
2. Remove the O-ring (1) from the cover and loosen the
Allen screws (2).
LAIL11MG0138A0A 2
3. Remove the flange (1) and the O-ring (2).
4. Loosen the hex nuts and remove both covers (3) with
the O-rings.
5. Remove circlip (4).
LAIL11MG0139A0A 3
48050419D 06/10/2017
21.1 [21.113] / 57
17. Transmission - Powershift transmission
6. Pull the pump shaft (1) out of the housing bore.
7. Remove the rectangular ring (2).
LAIL11MG0140A0A 4
8. Press the ball bearing (1) off the pump shaft.
LAIL11MG0141A0A 5
48050419D 06/10/2017
21.1 [21.113] / 58
18. Transmission - Powershift transmission
Powershift transmission - Assemble
845B Torque converter transmission, Tier 3, made in Brazil
[HBZN0845VCAF01093 - ]
(6 x 3 torque converter) OR (Tier 1) OR (Tier 3-VHP)
865B Torque converter transmission, Tier 3,made in Brazil [NBAF14004 - ] (6 x 3 torque converter) OR (Tier 2) OR (Tier 3-VHP) OR (Tier 0)
P.T.O.
1. For a shaft pump without a “Lock-up” clutch, press the
ball bearing (1) into the pump bearing (2) until contact
is made.
LAIL11MG0161A0A 1
2. For a shaft pump with a “Lock-up” clutch, install the
four-point bearing (1) in the pump shaft.
3. Press the lower bearing inner ring to the contact posi-
tion.
4. Position the ball bearing.
5. Press the upper bearing inner ring to the contact posi-
tion.
6. Adjust the axial play of 0.0 – 0.05 mm using a retaining
ring (2), with a thickness of between 2.2 – 2.5 mm (in
steps of 0.05 mm.
LAIL11MG0162A0A 2
7. Install the rectangular ring (1).
50 x 2.5 without a Lock-up clutch
60 x 3 with a Lock-up clutch
8. Grease and centrically align rectangular ring.
9. Install the pump shaft (2) until contact is obtained.
LAIL11MG0163A0A 3
48050419D 06/10/2017
21.1 [21.113] / 59
19. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
20. Transmission - Powershift transmission
10. Fix the pump shaft by means of an 85 x 3 retaining
ring (1).
11. Install the O-ring 104 x 3 (2) onto the flange (3) and
then grease it and bring it into the contact position on
the rear part of the housing.
LAIL11MG0164A0A 4
12. Fix the flange with Allen screws (1).
13. Insert the O-ring 130 x 3 (2) into the hole of the flange
and grease it.
Tightening torque (M16/8.8 x 30) MA = 195 N·m
LAIL11MG0165A0A 5
14. Place the cover sheet (1) on the flange and fix it with
hex screws (2).
Tightening torque (M16/8.8 x 20) MA = 46 N·m
LAIL11MG0166A0A 6
15. For the lubrication line for the version with a “Lock-up”
clutch, install the PTO for the lubrication line
(1) Lubrication line PTO.
(2) Banjo bolt (6 – DIN 7643) seal ring (A-10 CU).
(3) Screw neck (SDS-L6 10 X 1) O-ring (10 X 1).
LAIL11MG0167A0A 7
48050419D 06/10/2017
21.1 [21.113] / 60
21. Transmission - Powershift transmission
Powershift transmission - Calibrate
845B Direct drive transmission, Tier 3, made in Brazil
[HBZN0845VBAF00184 - ]
(8 x 8 direct drive) OR (Tier 1) OR (Tier 3-VHP)
865B AWD Direct drive transmission, All wheel drive (AWD), Tier 3, made
in Brazil [HBZN0865TBAF00840 - ]
865B Direct drive transmission, Tier 3, made in Brazil [NBAF15000 - ] (8 x 8 direct drive) OR (Tier 2) OR (Tier 3-VHP) OR (Tier 0) OR (AWD)
885B AWD Direct drive transmission, All wheel drive (AWD), Tier 3, made
in Brazil [HBZN0885TBAF00558 - ]
885B Direct drive transmission, Tier 3, made in Brazil [HBZN0885LBAF00098
- ]
(8 x 8 direct drive) OR (Tier 2) OR (Tier 3-VHP) OR (Tier 0) OR (AWD)
Transmission Calibration
Reasons to calibrate the transmission:
1. To make the Transmission Control Unit (TCU) work with the transmission.
2. To reduce the impact of manufacturing tolerances.
3. To provide consistency between machines. The calibration process ensures that each transmission clutch is
activated from the same point, before the clutch coupling.
When to calibrate:
1. If the solenoid valve assembly has been replaced.
2. After repairs that involve the transmission gears.
3. If the Transmission Control Unit (TCU) has been replaced.
4. If shifting quality deteriorates.
Calibration of the Transmission Clutches
1. Start the engine on a flat, level, firm surface away from
any obstacles. Move the machine back and forth to
warm up the transmission oil.
NOTE: The transmission oil temperature should be be-
tween 60 – 71 °C (140 – 160 °F) for the calibration to be
effective.
2. Bring the machine to a stop.
3. Support the implements on the ground.
4. Set the parking brake. Put the ignition switch in the
“OFF” position.
5. Clear the area of unauthorized personnel.
6. The fuse compartment is located on the bottom of the
right-hand console in the operator's cab. Open the
compartment to access connectors (X36) and (X37).
COIL15GRD0040AA 1
48050419D 06/10/2017
21.1 [21.113] / 61
22. Transmission - Powershift transmission
7. Remove the seal from connector (X37).
8. Connect a connector (X37) that makes a bridge [con-
nects pin (A) to pin (B)] on the calibration connector of
the machine's wiring harness (X36).
ATTENTION: Any error that appears during calibration will
cause the process to terminate. You must re-start the cali-
bration process from the beginning.
COIL15GRD0059BA 2
COIL15GRD0039BA 3
48050419D 06/10/2017
21.1 [21.113] / 62