This service manual provides information for servicing motor graders, including the 845B, 865B, and 885B models. It covers key components and systems such as the transmission, front and rear axles, brakes, hydraulics, frames, steering, climate control, electrical systems, and dozer blade/arm. Safety warnings are also provided regarding working with batteries and the variable displacement pump. The manual is intended to guide service technicians in properly maintaining and repairing components to ensure safe and reliable operation.
Case ih farmall 75 n tractor service repair manualufjjsjekkeemme
This document is a service manual that provides part numbers and specifications for Farmall tractors models 75N, 85N, 95N and 105N. It includes detailed sections on the tractor engine, clutch, transmission, 4WD system, front and rear axles, power take-off, brakes, hydraulics, hitches and steering. The manual links each tractor model and configuration to the appropriate engine and regional market.
Case 590 sn two wheel drive (2wd) tier 3 tractor loader backhoe service repai...fujsjefjskemm
This document is a service manual for Case tractor loader backhoes models 580N, 580SN, 580SN WT, 590SN from years 2015-present. It contains information on engine systems, transmission, front and rear axles, brakes, hydraulic systems, frames, steering, wheels, cab climate control, electrical systems, front loader/bucket, booms/dippers/buckets, platform/cab/bodywork. Safety instructions are provided to perform maintenance and repairs. The document instructs only qualified personnel to perform maintenance following safety procedures.
Case 865 b awd motor grader service repair manualfjjskekmsemm
This service manual provides information on servicing various components of motor graders, including the transmission, front and rear axle systems, brakes, hydraulics, frames, steering, cab climate control, electrical systems, dozer blade, and tools. It contains sections covering safety procedures for working on batteries and electrical systems, as well as specifications and repair instructions for individual parts.
Case 885 b vhp motor grader service repair manualfjkskekkemmmd
This service manual provides information on servicing various components of motor graders, including the transmission, front and rear axle systems, brakes, hydraulics, frames, steering, cab climate control, electrical systems, dozer blade, and tools. It contains sections covering safety procedures for working on batteries and electrical systems, as well as specifications and repair instructions for individual parts.
Case 885 b awd motor grader service repair manualfjkskekkemmmd
This service manual provides information on servicing various components of motor graders, including the transmission, front and rear axle systems, brakes, hydraulic systems, frames, steering, cab climate control, electrical systems, dozer blade, and tools. It includes safety warnings and covers topics such as powershift transmission components, non-powered front axle, powered rear axle, parking brake, hydraulic pumps, ballasts, hydraulic control components, heating, ventilation, air conditioning, electrical harnesses, engine starting, alternator, battery, transmission control, and dozer blade.
Case ih quantum 95 f tractor service repair manualufjjsjekkeemme
This document provides an introduction and safety guidelines for servicing tractors. It lists general safety rules including wearing proper protective equipment, disconnecting batteries before servicing, and avoiding working on running equipment. Precautions are given for fueling, lifting, towing, and working in confined spaces or on slopes. Following basic safety practices can help avoid accidents in the workshop.
Case ih quantum 85 f tractor service repair manualudfujjsejkkem
This document provides an introduction and safety guidelines for servicing tractors. It lists general safety rules including wearing proper protective equipment, disconnecting batteries before servicing, and avoiding working on running equipment. Precautions are given for fueling, lifting, towing, transporting, and working on sloped surfaces. Following the fundamental safety regulations can help avoid accidents in the workshop.
Case ih quantum 85 f tractor service repair manualkfdjkskdmm
This document is a service manual for Quantum tractors that contains part numbers and engine specifications for various Quantum tractor models. It includes an overview of the tractor systems covered in the manual such as the engine, transmission, axles, hydraulics, steering, brakes, electrical systems and more. The table of contents lists the section numbers and titles for each system covered.
Case ih farmall 75 n tractor service repair manualufjjsjekkeemme
This document is a service manual that provides part numbers and specifications for Farmall tractors models 75N, 85N, 95N and 105N. It includes detailed sections on the tractor engine, clutch, transmission, 4WD system, front and rear axles, power take-off, brakes, hydraulics, hitches and steering. The manual links each tractor model and configuration to the appropriate engine and regional market.
Case 590 sn two wheel drive (2wd) tier 3 tractor loader backhoe service repai...fujsjefjskemm
This document is a service manual for Case tractor loader backhoes models 580N, 580SN, 580SN WT, 590SN from years 2015-present. It contains information on engine systems, transmission, front and rear axles, brakes, hydraulic systems, frames, steering, wheels, cab climate control, electrical systems, front loader/bucket, booms/dippers/buckets, platform/cab/bodywork. Safety instructions are provided to perform maintenance and repairs. The document instructs only qualified personnel to perform maintenance following safety procedures.
Case 865 b awd motor grader service repair manualfjjskekmsemm
This service manual provides information on servicing various components of motor graders, including the transmission, front and rear axle systems, brakes, hydraulics, frames, steering, cab climate control, electrical systems, dozer blade, and tools. It contains sections covering safety procedures for working on batteries and electrical systems, as well as specifications and repair instructions for individual parts.
Case 885 b vhp motor grader service repair manualfjkskekkemmmd
This service manual provides information on servicing various components of motor graders, including the transmission, front and rear axle systems, brakes, hydraulics, frames, steering, cab climate control, electrical systems, dozer blade, and tools. It contains sections covering safety procedures for working on batteries and electrical systems, as well as specifications and repair instructions for individual parts.
Case 885 b awd motor grader service repair manualfjkskekkemmmd
This service manual provides information on servicing various components of motor graders, including the transmission, front and rear axle systems, brakes, hydraulic systems, frames, steering, cab climate control, electrical systems, dozer blade, and tools. It includes safety warnings and covers topics such as powershift transmission components, non-powered front axle, powered rear axle, parking brake, hydraulic pumps, ballasts, hydraulic control components, heating, ventilation, air conditioning, electrical harnesses, engine starting, alternator, battery, transmission control, and dozer blade.
Case ih quantum 95 f tractor service repair manualufjjsjekkeemme
This document provides an introduction and safety guidelines for servicing tractors. It lists general safety rules including wearing proper protective equipment, disconnecting batteries before servicing, and avoiding working on running equipment. Precautions are given for fueling, lifting, towing, and working in confined spaces or on slopes. Following basic safety practices can help avoid accidents in the workshop.
Case ih quantum 85 f tractor service repair manualudfujjsejkkem
This document provides an introduction and safety guidelines for servicing tractors. It lists general safety rules including wearing proper protective equipment, disconnecting batteries before servicing, and avoiding working on running equipment. Precautions are given for fueling, lifting, towing, transporting, and working on sloped surfaces. Following the fundamental safety regulations can help avoid accidents in the workshop.
Case ih quantum 85 f tractor service repair manualkfdjkskdmm
This document is a service manual for Quantum tractors that contains part numbers and engine specifications for various Quantum tractor models. It includes an overview of the tractor systems covered in the manual such as the engine, transmission, axles, hydraulics, steering, brakes, electrical systems and more. The table of contents lists the section numbers and titles for each system covered.
Case ih quantum 105 f tractor service repair manualfjskekqaswdmmem
This document provides an introduction and safety guidelines for servicing tractors. It lists general safety rules including wearing proper protective equipment, disconnecting batteries before servicing, and avoiding working on running equipment. Precautions are given for fueling, lifting, towing, and working in confined spaces or with bystanders present. Following the fundamental safety regulations outlined can help avoid accidents in the workshop.
Case ih quantum 75 f tractor service repair manualudfujjsejkkem
This document is a service manual for Quantum tractors that includes part numbers and engine specifications. It provides an overview of the manual's contents which cover systems of the tractor such as the engine, transmission, brakes, hydraulics, electrical systems, and more. Each system includes sections that describe components, operation, and repair procedures. Product models covered include the Quantum 75F, 85F, 95F, and 105F tractors.
Case ih quantum 105 f tractor service repair manualufjskekfmsme
This document is a service manual for Quantum tractors that includes part numbers and engine specifications for various Quantum models. It provides an overview of the manual's contents which include sections on the engine, clutch, transmission, 4WD system, front and rear axles, PTO, brakes and controls, hydraulic systems, hitches and couplings, steering, wheels, cab climate control, and electrical systems. Each section provides maintenance and repair information for the corresponding components and systems of the Quantum tractors.
Case ih quantum 95 f tractor service repair manualufjkskemsem
This document provides an introduction and safety guidelines for servicing tractors. It lists general safety rules including wearing proper protective equipment, disconnecting the battery before servicing, and avoiding working on running equipment. Precautions are given for fueling, lifting, towing, and working in confined spaces or with bystanders present. Following the fundamental safety regulations outlined can help avoid accidents in the workshop.
Case ih quantum 105 f tractor service repair manualusjefjkekmem
This document provides an introduction and safety guidelines for servicing tractors. It lists general safety rules including wearing proper protective equipment, disconnecting batteries before servicing, and avoiding working on running equipment. Precautions are given for fueling, lifting, towing, and working in confined spaces or with bystanders present. Following the fundamental safety regulations outlined can help avoid accidents in the workshop.
Case ih quantum 85 f tractor service repair manualfujskefksmem
This document provides an introduction and safety guidelines for servicing tractors. It lists general safety rules including wearing proper protective equipment, disconnecting the battery before servicing, and avoiding working on running equipment. Precautions are given for fueling, lifting, towing, and working in confined spaces or with bystanders present. Following the fundamental safety regulations outlined can help avoid accidents in the workshop.
Case ih quantum 95 f tractor service repair manualfjskekmmem
This document provides an introduction and safety guidelines for servicing tractors. It lists general safety rules including wearing proper protective equipment, disconnecting the battery before servicing, and avoiding working on running equipment. Precautions are given for fueling, lifting, towing, and working in confined spaces or on slopes. Following basic safety practices can help avoid many accidents during maintenance.
Case ih quantum 75 f tractor service repair manualfujskefksmem
This document provides an introduction and safety guidelines for servicing tractors. It lists general safety rules including wearing proper protective equipment, disconnecting batteries before servicing, and avoiding working on running equipment. Precautions are given for fueling, lifting, towing, and working in confined spaces or with bystanders present. Following the fundamental safety regulations outlined can help avoid accidents in the workshop.
Case ih quantum 75 f tractor service repair manualkfdjkskdmm
This document is a service manual for Quantum tractors that contains part numbers and engine specifications for various Quantum tractor models. It includes an overview of the tractor systems covered in the manual such as the engine, transmission, axles, hydraulics, steering, brakes, electrical systems and more. The table of contents lists the section numbers and titles for each system covered.
Case ih quantum 105 f tractor service repair manualfjeisldkmemm
This document is a service manual for Quantum tractors that includes part numbers and engine specifications. It provides an overview of the manual's contents which cover the tractor's engine, clutch, transmission, 4WD system, front and rear axles, PTO, brakes and controls, hydraulic systems, hitches and couplings, steering, wheels, cab climate control, and electrical systems. The manual contains information to service and repair these tractor components and systems.
Case ih quantum 105 f tractor service repair manualufjjsjekkeidol
This document is a service manual for Quantum tractors that includes part numbers and engine specifications for various Quantum models. It provides an overview of the manual's contents which include sections on the engine, clutch, transmission, front and rear axle systems, power take-off, brakes, hydraulics, hitches and couplings, steering, wheels, cab climate control, and electrical systems. Each section provides maintenance and repair information for the corresponding components and systems of the Quantum tractors.
Case ih magnum 380 continuously variable transmission (cvt) tier 4 b tractor ...fhsjejfksemm
This document is a service manual for several Magnum tractor models made by Case IH. It provides information on servicing and repairing components of the tractors, including the engine, transmission, axles, hydraulics, electrical systems, cab, and other parts. The manual is intended for qualified service technicians and includes safety warnings and product identification information.
Case ih magnum 280 continuously variable transmission (cvt) tier 4 b tractor ...fujsekfkksemm
This document is a service manual for Case IH Magnum 250-380 CVT tractors from model years 2017-present. It provides detailed technical information on the engine, transmission, axles, hydraulics, steering, brakes, electrical systems, and other components to assist technicians with repairs and maintenance. The manual is published by CNH Industrial and is intended for use by authorized service technicians.
Case ih magnum 250 continuously variable transmission (cvt) tier 4 b tractor ...fhsjejfksemm
This document is a service manual for Case IH Magnum 250-380 CVT tractors from model years 2017-present. It provides detailed technical information on the engine, transmission, axles, hydraulics, steering, brakes, electrical systems, and other components to assist technicians with repairs and maintenance. The manual is published by CNH Industrial and is intended for use by authorized service technicians.
Case ih magnum 340 rowtrac continuously variable transmission (cvt) tier 4 b ...fujsefkskemm
This document is a service manual for several Magnum tractor models made by Case IH. It provides information on servicing and repairing components of the tractors, including the engine, transmission, axles, hydraulics, electrical systems, cab, and other parts. The manual is intended for qualified service technicians and includes safety warnings and product identification information.
Case ih magnum 340 continuously variable transmission (cvt) tier 4 b tractor ...fujsekfksmemer
This document is a service manual for several Magnum tractor models and variants produced by CNH Industrial. It provides technical specifications, diagrams, and repair procedures for the engine, transmission, axles, hydraulics, electrical systems, cab, and other components. Safety precautions are outlined for personal safety during maintenance and repair work. The manual is intended for qualified service technicians.
Case ih magnum 380 rowtrac continuously variable transmission (cvt) tier 4 b ...fjjskkemsmee
This document is a service manual for Case IH Magnum 250-380 CVT tractors from model years 2017-present. It provides detailed technical information on the engine, transmission, axles, hydraulics, steering, brakes, electrical systems, and other components to assist technicians with repairs and maintenance. The manual is published by CNH Industrial and is intended for use by authorized service technicians.
Case ih magnum 310 continuously variable transmission (cvt) tier 4 b tractor ...fjjsekkksmeik
This document is a service manual for Case IH Magnum tractors and rowtrac tractors with continuously variable transmissions (CVT) and Tier 4B engines. It provides information on engine systems, power coupling, transmission, four-wheel drive systems, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, hitches and implements, frames and ballasting, steering, wheels, tracks and suspensions, cab climate control, electrical systems, and the platform, cab, bodywork and decals. The manual includes an introduction, table of contents listing the various systems, and sections providing maintenance and repair information for each system.
Case ih magnum 340 continuously variable transmission (cvt) tier 4 b tractor ...fujsefkskemm
This document is a service manual for Case IH Magnum 250-380 CVT tractors from model years 2017-present. It provides detailed technical information on the engine, transmission, axles, hydraulics, steering, brakes, electrical systems, and other components to assist technicians with repairs and maintenance. The manual is published by CNH Industrial and is intended for use by authorized service technicians.
Case ih magnum 310 rowtrac continuously variable transmission (cvt) tier 4 b ...fujsekksmem
This document is a service manual for Case IH Magnum tractors and rowtrac tractors with continuously variable transmissions (CVT) and Tier 4B engines. It provides information on engine systems, power coupling, transmission, four-wheel drive systems, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, hitches and implements, frames and ballasting, steering, wheels, tracks and suspensions, cab climate control, electrical systems, and the platform, cab, bodywork and decals. The manual includes an introduction, table of contents listing the various systems, and sections providing specifications and maintenance/repair instructions for each system.
Toro reelmaster 5300 d mower service repair manualfusjejfjskekemm
This document is a service manual for the Reelmaster 5300-D that provides service technicians with information for troubleshooting, testing, and repairing major systems and components. It contains chapters covering safety instructions, product records and manuals, the Mitsubishi diesel engine, hydraulic system, electrical system, differentials, steering and brakes, cutting units, and the 4WD rear axle. Technicians are directed to follow all safety precautions when operating or servicing the machine.
Toro reelmaster 5100 d mower service repair manualfusjejfjskekemm
This document is a service manual for the Reelmaster 5100-D. It provides service technicians with information for troubleshooting, testing, and repairing major systems and components of the Reelmaster 5100-D. The manual contains chapters covering safety instructions, product records, the Mitsubishi diesel engine, hydraulic system, electrical system, differentials, steering and brakes, cutting units, and rear axle. It includes specifications, schematics, troubleshooting guides, testing procedures, and repair instructions for each system.
More Related Content
Similar to Case 865 b vhp motor grader service repair manual
Case ih quantum 105 f tractor service repair manualfjskekqaswdmmem
This document provides an introduction and safety guidelines for servicing tractors. It lists general safety rules including wearing proper protective equipment, disconnecting batteries before servicing, and avoiding working on running equipment. Precautions are given for fueling, lifting, towing, and working in confined spaces or with bystanders present. Following the fundamental safety regulations outlined can help avoid accidents in the workshop.
Case ih quantum 75 f tractor service repair manualudfujjsejkkem
This document is a service manual for Quantum tractors that includes part numbers and engine specifications. It provides an overview of the manual's contents which cover systems of the tractor such as the engine, transmission, brakes, hydraulics, electrical systems, and more. Each system includes sections that describe components, operation, and repair procedures. Product models covered include the Quantum 75F, 85F, 95F, and 105F tractors.
Case ih quantum 105 f tractor service repair manualufjskekfmsme
This document is a service manual for Quantum tractors that includes part numbers and engine specifications for various Quantum models. It provides an overview of the manual's contents which include sections on the engine, clutch, transmission, 4WD system, front and rear axles, PTO, brakes and controls, hydraulic systems, hitches and couplings, steering, wheels, cab climate control, and electrical systems. Each section provides maintenance and repair information for the corresponding components and systems of the Quantum tractors.
Case ih quantum 95 f tractor service repair manualufjkskemsem
This document provides an introduction and safety guidelines for servicing tractors. It lists general safety rules including wearing proper protective equipment, disconnecting the battery before servicing, and avoiding working on running equipment. Precautions are given for fueling, lifting, towing, and working in confined spaces or with bystanders present. Following the fundamental safety regulations outlined can help avoid accidents in the workshop.
Case ih quantum 105 f tractor service repair manualusjefjkekmem
This document provides an introduction and safety guidelines for servicing tractors. It lists general safety rules including wearing proper protective equipment, disconnecting batteries before servicing, and avoiding working on running equipment. Precautions are given for fueling, lifting, towing, and working in confined spaces or with bystanders present. Following the fundamental safety regulations outlined can help avoid accidents in the workshop.
Case ih quantum 85 f tractor service repair manualfujskefksmem
This document provides an introduction and safety guidelines for servicing tractors. It lists general safety rules including wearing proper protective equipment, disconnecting the battery before servicing, and avoiding working on running equipment. Precautions are given for fueling, lifting, towing, and working in confined spaces or with bystanders present. Following the fundamental safety regulations outlined can help avoid accidents in the workshop.
Case ih quantum 95 f tractor service repair manualfjskekmmem
This document provides an introduction and safety guidelines for servicing tractors. It lists general safety rules including wearing proper protective equipment, disconnecting the battery before servicing, and avoiding working on running equipment. Precautions are given for fueling, lifting, towing, and working in confined spaces or on slopes. Following basic safety practices can help avoid many accidents during maintenance.
Case ih quantum 75 f tractor service repair manualfujskefksmem
This document provides an introduction and safety guidelines for servicing tractors. It lists general safety rules including wearing proper protective equipment, disconnecting batteries before servicing, and avoiding working on running equipment. Precautions are given for fueling, lifting, towing, and working in confined spaces or with bystanders present. Following the fundamental safety regulations outlined can help avoid accidents in the workshop.
Case ih quantum 75 f tractor service repair manualkfdjkskdmm
This document is a service manual for Quantum tractors that contains part numbers and engine specifications for various Quantum tractor models. It includes an overview of the tractor systems covered in the manual such as the engine, transmission, axles, hydraulics, steering, brakes, electrical systems and more. The table of contents lists the section numbers and titles for each system covered.
Case ih quantum 105 f tractor service repair manualfjeisldkmemm
This document is a service manual for Quantum tractors that includes part numbers and engine specifications. It provides an overview of the manual's contents which cover the tractor's engine, clutch, transmission, 4WD system, front and rear axles, PTO, brakes and controls, hydraulic systems, hitches and couplings, steering, wheels, cab climate control, and electrical systems. The manual contains information to service and repair these tractor components and systems.
Case ih quantum 105 f tractor service repair manualufjjsjekkeidol
This document is a service manual for Quantum tractors that includes part numbers and engine specifications for various Quantum models. It provides an overview of the manual's contents which include sections on the engine, clutch, transmission, front and rear axle systems, power take-off, brakes, hydraulics, hitches and couplings, steering, wheels, cab climate control, and electrical systems. Each section provides maintenance and repair information for the corresponding components and systems of the Quantum tractors.
Case ih magnum 380 continuously variable transmission (cvt) tier 4 b tractor ...fhsjejfksemm
This document is a service manual for several Magnum tractor models made by Case IH. It provides information on servicing and repairing components of the tractors, including the engine, transmission, axles, hydraulics, electrical systems, cab, and other parts. The manual is intended for qualified service technicians and includes safety warnings and product identification information.
Case ih magnum 280 continuously variable transmission (cvt) tier 4 b tractor ...fujsekfkksemm
This document is a service manual for Case IH Magnum 250-380 CVT tractors from model years 2017-present. It provides detailed technical information on the engine, transmission, axles, hydraulics, steering, brakes, electrical systems, and other components to assist technicians with repairs and maintenance. The manual is published by CNH Industrial and is intended for use by authorized service technicians.
Case ih magnum 250 continuously variable transmission (cvt) tier 4 b tractor ...fhsjejfksemm
This document is a service manual for Case IH Magnum 250-380 CVT tractors from model years 2017-present. It provides detailed technical information on the engine, transmission, axles, hydraulics, steering, brakes, electrical systems, and other components to assist technicians with repairs and maintenance. The manual is published by CNH Industrial and is intended for use by authorized service technicians.
Case ih magnum 340 rowtrac continuously variable transmission (cvt) tier 4 b ...fujsefkskemm
This document is a service manual for several Magnum tractor models made by Case IH. It provides information on servicing and repairing components of the tractors, including the engine, transmission, axles, hydraulics, electrical systems, cab, and other parts. The manual is intended for qualified service technicians and includes safety warnings and product identification information.
Case ih magnum 340 continuously variable transmission (cvt) tier 4 b tractor ...fujsekfksmemer
This document is a service manual for several Magnum tractor models and variants produced by CNH Industrial. It provides technical specifications, diagrams, and repair procedures for the engine, transmission, axles, hydraulics, electrical systems, cab, and other components. Safety precautions are outlined for personal safety during maintenance and repair work. The manual is intended for qualified service technicians.
Case ih magnum 380 rowtrac continuously variable transmission (cvt) tier 4 b ...fjjskkemsmee
This document is a service manual for Case IH Magnum 250-380 CVT tractors from model years 2017-present. It provides detailed technical information on the engine, transmission, axles, hydraulics, steering, brakes, electrical systems, and other components to assist technicians with repairs and maintenance. The manual is published by CNH Industrial and is intended for use by authorized service technicians.
Case ih magnum 310 continuously variable transmission (cvt) tier 4 b tractor ...fjjsekkksmeik
This document is a service manual for Case IH Magnum tractors and rowtrac tractors with continuously variable transmissions (CVT) and Tier 4B engines. It provides information on engine systems, power coupling, transmission, four-wheel drive systems, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, hitches and implements, frames and ballasting, steering, wheels, tracks and suspensions, cab climate control, electrical systems, and the platform, cab, bodywork and decals. The manual includes an introduction, table of contents listing the various systems, and sections providing maintenance and repair information for each system.
Case ih magnum 340 continuously variable transmission (cvt) tier 4 b tractor ...fujsefkskemm
This document is a service manual for Case IH Magnum 250-380 CVT tractors from model years 2017-present. It provides detailed technical information on the engine, transmission, axles, hydraulics, steering, brakes, electrical systems, and other components to assist technicians with repairs and maintenance. The manual is published by CNH Industrial and is intended for use by authorized service technicians.
Case ih magnum 310 rowtrac continuously variable transmission (cvt) tier 4 b ...fujsekksmem
This document is a service manual for Case IH Magnum tractors and rowtrac tractors with continuously variable transmissions (CVT) and Tier 4B engines. It provides information on engine systems, power coupling, transmission, four-wheel drive systems, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, hitches and implements, frames and ballasting, steering, wheels, tracks and suspensions, cab climate control, electrical systems, and the platform, cab, bodywork and decals. The manual includes an introduction, table of contents listing the various systems, and sections providing specifications and maintenance/repair instructions for each system.
Similar to Case 865 b vhp motor grader service repair manual (20)
Toro reelmaster 5300 d mower service repair manualfusjejfjskekemm
This document is a service manual for the Reelmaster 5300-D that provides service technicians with information for troubleshooting, testing, and repairing major systems and components. It contains chapters covering safety instructions, product records and manuals, the Mitsubishi diesel engine, hydraulic system, electrical system, differentials, steering and brakes, cutting units, and the 4WD rear axle. Technicians are directed to follow all safety precautions when operating or servicing the machine.
Toro reelmaster 5100 d mower service repair manualfusjejfjskekemm
This document is a service manual for the Reelmaster 5100-D. It provides service technicians with information for troubleshooting, testing, and repairing major systems and components of the Reelmaster 5100-D. The manual contains chapters covering safety instructions, product records, the Mitsubishi diesel engine, hydraulic system, electrical system, differentials, steering and brakes, cutting units, and rear axle. It includes specifications, schematics, troubleshooting guides, testing procedures, and repair instructions for each system.
Toro groundsmaster 3000 service repair manualfusjejfjskekemm
This document is a service manual for the Groundsmaster 3000/3000-D. It contains chapters covering safety, product records and maintenance, engine specifications, hydraulic and electrical systems, rear axles, and cutting units. The manual provides service technicians with information for troubleshooting, testing, and repairing major systems and components. It emphasizes safety precautions that should be followed during operation and maintenance.
Toro greensmaster 3200 d service repair manualfusjejfjskekemm
This document is a service manual that provides information for troubleshooting, testing, and repairing major systems and components of the Greensmaster 3200/3200-D. It contains chapters covering safety, product records and maintenance, the Vanguard 3/LC gasoline engine, the Perkins engine, the hydraulic system, the electrical system, wheels and brakes, cutting units, and other systems. Technicians can use this manual to work on and repair parts of the Greensmaster.
Still wagner efv 160 forklift service repair manualfusjejfjskekemm
This document is a workshop manual for electric forklift trucks. It provides specifications and describes the functional characteristics and components of the trucks to allow for proper maintenance and repair. The manual is divided into sections covering various vehicle systems and components. Updates are provided through replacement or supplementary sheets as the truck models are further developed.
Still mx x order picker general 1, 2 80 v forklift service repair manualfusjejfjskekemm
The document provides a link to click for more information about an unspecified topic. It notes that if the link does not work, the reader should first download the attached PDF document and then click on the link contained within it to access the additional information.
The document contains technical specifications for a battery including battery type, capacity, voltage, software version, sensors, hardware version, and maintenance intervals. It lists parameters, sensor readings, and voltage levels for various components of the battery.
This document contains technical specifications for a battery including:
- Battery type, capacity, voltage, weight, and dimensions
- Software version information for various components like the charger, converter, and sensors
- Operating parameters such as lift/lower/tilt speeds and currents
- Diagnostic values for temperature, voltage, and current sensors
This document provides specifications and repair procedures for the STIHL MS 460 chainsaw from 2004-2011. It includes specifications on the engine, fuel system, ignition system, and other components. The document also provides detailed instructions for troubleshooting, disassembling, repairing, and reassembling the various systems and components of the chainsaw. Tightening torques are specified for fasteners. Special tools needed for repairs are referenced.
This document provides specifications and repair procedures for STIHL MS 290, 310, and 390 chainsaws from 2004-2011. It covers the engine, fuel system, ignition system, clutch, chain drive, rewind starter, handles, chain lubrication, and other systems. Troubleshooting charts list common problems, causes, and remedies. The document instructs technicians to use original STIHL replacement parts and observe all safety precautions when servicing the saws.
This document provides service and repair information for the STIHL MS 270 and MS 280 chainsaws. It includes specifications, troubleshooting charts, repair procedures, and torque specifications for various components. The document gives detailed instructions and diagrams for servicing the engine, clutch, chain drive, ignition system, fuel system, and other parts. Safety precautions for repair work involving the chainsaw and gasoline are also provided.
Stihl ms 200 t chainsaw service repair manualfusjejfjskekemm
This document provides specifications and service information for STIHL MS 200 and MS 200 T chainsaws. It includes sections on safety precautions, specifications, troubleshooting, repairs and replacement of parts, tools needed, and other technical details. Tightening torques are listed for various fasteners.
Stihl ms 192 t chainsaw service repair manualfusjejfjskekemm
This document provides specifications and troubleshooting information for the STIHL MS 192 T chainsaw. It includes specifications for the engine, fuel system, ignition system, and chain lubrication system. The document also lists typical tightening torques for various fasteners. Additionally, it provides potential causes and remedies for common problems with the clutch, chain drive, chain brake, chain tensioner, chain lubrication, rewind starter, ignition system, carburetor, and engine.
This document provides instructions for dismantling and assembling the safety equipment, specifically the chain brake, on several chain saw models. It describes removing parts like the clutch cover, guide bar, chain, hand guard, brake spring, toggle joint, and bearing pin. It emphasizes checking for wear on parts like the brake band which should be at least 0.8mm thick. Proper lubrication and handling of tensioned parts like the brake spring are also highlighted for safety.
This document provides instructions for dismantling and assembling the safety equipment, specifically the chain brake, on several chain saw models. It describes removing parts like the clutch cover, guide bar, chain, hand guard, brake spring, toggle joint, and bearing pin. It emphasizes checking that the brake band has a minimum thickness of 0.8mm and lubricating moving parts during assembly. Safety warnings are included to avoid injury from the tensioned brake spring.
Jcb isuzu engine au 4 le2 bv-4le2 service repair manualfusjejfjskekemm
This document provides general information and service precautions for working on engines. It discusses recommended lubricants, a table of contents, reading the model number, terminology and abbreviations. Safety precautions are outlined, including using proper tools and protective equipment. Instructions are provided for removing and applying liquid gasket, using locking agents like Loctite, and measuring clearances with Plastigage. Standard torque specifications are included.
Jcb dieselmax engine (sa sc build) service repair manualfusjejfjskekemm
This document provides an overview and technical specifications for JCB Dieselmax mechanical engines. It includes:
- Identification of major engine components and labeling
- Engine data such as dimensions, capacities and specifications
- Information on acceptable and unacceptable fuels
- Lubrication requirements and coolant mixtures
- Torque specifications for fasteners
- Identification of service tools and repair kits
Jcb diesel 1100 series engine rf service repair manualfusjejfjskekemm
This document is a workshop manual for Perkins 1100 Series 4 cylinder diesel engines. It provides detailed instructions for disassembly, inspection, repair and reassembly of engine components. The manual is written for use by technicians and includes safety information, specifications, torque values and a parts list. Individual chapters cover the cylinder head, pistons, connecting rods, crankshaft, timing gears and other systems.
Jcb diesel 1000 series engine model as service repair manualfusjejfjskekemm
This document is a workshop manual for Perkins New 1000 Series diesel engines used in industrial and agricultural applications. It provides detailed instructions on servicing and repairing engine components like the cylinder head, pistons, crankshaft, timing case, cylinder block, and other systems. The manual contains chapters covering general information, specifications, disassembly and assembly procedures, inspection criteria, and specifications/dimensions for components. It is intended to guide mechanics in properly servicing and repairing these engines.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
2. SERVICE MANUAL
845B Direct drive transmission, Tier 3, made in Brazil [HBZN0845VBAF00184
- ], 845B Torque converter transmission, Tier 3, made in Brazil
[HBZN0845VCAF01093 - ], 865B Direct drive transmission, Tier 3, made in
Brazil [NBAF15000 - ], 865B Torque converter transmission, Tier 3,made in
Brazil [NBAF14004 - ], 865B AWD Direct drive transmission, All wheel drive
(AWD), Tier 3, made in Brazil [HBZN0865TBAF00840 - ], 885B Direct drive
transmission, Tier 3, made in Brazil [HBZN0885LBAF00098 - ], 885B Torque
converter transmission, Tier 3, made in Brazil [HBZN0885PCAF00871 - ],
885B AWD Direct drive transmission, All wheel drive (AWD), Tier 3, made
in Brazil [HBZN0885TBAF00558 - ]
48050419D 06/10/2017
EN
3. Link Product / Engine
Product Market Product Engine
845B Transmissão de acionamento
direto, Tier 3, produzido no Brasil
[HBZN0845VBAF00184 - ]
Australia New Zealand F4HE9687W*J101
845B Transmissão de acionamento
direto, Tier 3, produzido no Brasil
[HBZN0845VBAF00184 - ]
Latin America F4HE9687W*J101
845B Transmissão de acionamento
direto, Tier 3, produzido no Brasil
[HBZN0845VBAF00184 - ]
Asia Pacific F4HE9687W*J101
845B Transmissão de acionamento
direto, Tier 3, produzido no Brasil
[HBZN0845VBAF00184 - ]
Middle East Africa F4HE9687W*J101
845B Transmissão de acionamento
direto, Tier 3, produzido no Brasil
[HBZN0845VBAF00184 - ]
North America F4HE9687W*J101
845B Transmissão do conversor
de torque, Tier 3, produzido no
Brasil [HBZN0845VCAF01093 - ]
Australia New Zealand F4HE9687W*J101
845B Transmissão do conversor
de torque, Tier 3, produzido no
Brasil [HBZN0845VCAF01093 - ]
North America F4HE9687W*J101
845B Transmissão do conversor
de torque, Tier 3, produzido no
Brasil [HBZN0845VCAF01093 - ]
Latin America F4HE9687W*J101
845B Transmissão do conversor
de torque, Tier 3, produzido no
Brasil [HBZN0845VCAF01093 - ]
Asia Pacific F4HE9687W*J101
845B Transmissão do conversor
de torque, Tier 3, produzido no
Brasil [HBZN0845VCAF01093 - ]
Middle East Africa F4HE9687W*J101
865B Transmissão de acionamento
direto, Tier 3, produzido no Brasil
[NBAF15000 - ]
Latin America F4HE9687C*J100
865B Transmissão de acionamento
direto, Tier 3, produzido no Brasil
[NBAF15000 - ]
Australia New Zealand F4HE9687C*J100
865B Transmissão de acionamento
direto, Tier 3, produzido no Brasil
[NBAF15000 - ]
Asia Pacific F4HE9687C*J100
865B Transmissão de acionamento
direto, Tier 3, produzido no Brasil
[NBAF15000 - ]
Middle East Africa F4HE9687C*J100
865B Transmissão de acionamento
direto, Tier 3, produzido no Brasil
[NBAF15000 - ]
North America F4HE9687C*J100
865B Transmissão do conversor
de torque, Tier 3, produzido no
Brasil [NBAF14004 - ]
Asia Pacific F4HE9687C*J100
48050419D 06/10/2017
4. Product Market Product Engine
865B Transmissão do conversor
de torque, Tier 3, produzido no
Brasil [NBAF14004 - ]
North America F4HE9687C*J100
865B Transmissão do conversor
de torque, Tier 3, produzido no
Brasil [NBAF14004 - ]
Australia New Zealand F4HE9687C*J100
865B Transmissão do conversor
de torque, Tier 3, produzido no
Brasil [NBAF14004 - ]
Middle East Africa F4HE9687C*J100
865B Transmissão do conversor
de torque, Tier 3, produzido no
Brasil [NBAF14004 - ]
Latin America F4HE9687C*J100
865B AWD Transmissão de
acionamento direto, tração
em todas as rodas (AWD),
Tier 3, produzido no Brasil
[HBZN0865TBAF00840 - ]
North America F4HE9687C*J100
885B Transmissão de acionamento
direto, Tier 3, produzido no Brasil
[HBZN0885LBAF00098 - ]
Middle East Africa F4HE9684L*J100
885B Transmissão de acionamento
direto, Tier 3, produzido no Brasil
[HBZN0885LBAF00098 - ]
Latin America F4HE9684L*J100
885B Transmissão de acionamento
direto, Tier 3, produzido no Brasil
[HBZN0885LBAF00098 - ]
North America F4HE9684L*J100
885B Transmissão de acionamento
direto, Tier 3, produzido no Brasil
[HBZN0885LBAF00098 - ]
Asia Pacific F4HE9684L*J100
885B Transmissão de acionamento
direto, Tier 3, produzido no Brasil
[HBZN0885LBAF00098 - ]
Australia New Zealand F4HE9684L*J100
885B Transmissão do conversor
de torque, Tier 3, produzido no
Brasil [HBZN0885PCAF00871 - ]
Australia New Zealand F4HE9687K*J105
885B Transmissão do conversor
de torque, Tier 3, produzido no
Brasil [HBZN0885PCAF00871 - ]
Middle East Africa F4HE9687K*J105
885B Transmissão do conversor
de torque, Tier 3, produzido no
Brasil [HBZN0885PCAF00871 - ]
Latin America F4HE9687K*J105
885B Transmissão do conversor
de torque, Tier 3, produzido no
Brasil [HBZN0885PCAF00871 - ]
North America F4HE9687K*J105
885B Transmissão do conversor
de torque, Tier 3, produzido no
Brasil [HBZN0885PCAF00871 - ]
Asia Pacific F4HE9687K*J105
885B AWD Transmissão de
acionamento direto, tração
em todas as rodas (AWD),
Tier 3, produzido no Brasil
[HBZN0885TBAF00558 - ]
North America F4HE9684L*J100
48050419D 06/10/2017
5. Contents
INTRODUCTION
Transmission.............................................................................. 21
[21.113] Powershift transmission ............................................................ 21.1
[21.135] Powershift transmission external controls.......................................... 21.2
[21.105] Powershift transmission hydraulic components.................................... 21.3
[21.155] Powershift transmission internal components...................................... 21.4
[21.700] Torque converter ................................................................... 21.5
[21.900] Hydraulic pump drive............................................................... 21.6
Front axle system ....................................................................... 25
[25.108] Final drive hub, steering knuckles, and shafts ..................................... 25.1
[25.400] Non-powered front axle ............................................................ 25.2
Rear axle system........................................................................ 27
[27.100] Powered rear axle.................................................................. 27.1
[27.106] Rear bevel gear set and differential................................................ 27.2
[27.120] Planetary and final drives .......................................................... 27.3
Brakes and controls .................................................................... 33
[33.110] Parking brake or parking lock ...................................................... 33.1
Hydraulic systems....................................................................... 35
[35.000] Hydraulic systems.................................................................. 35.1
Frames and ballasting ................................................................. 39
[39.100] Frame .............................................................................. 39.1
[39.140] Ballasts and supports .............................................................. 39.2
Steering..................................................................................... 41
[41.200] Hydraulic control components...................................................... 41.1
Cab climate control ..................................................................... 50
[50.100] Heating ............................................................................. 50.1
48050419D 06/10/2017
8. INTRODUCTION
Safety rules - Batteries
845B
865B
885B
WARNING
Improper operation or service of this machine can result in an accident.
Before working on any component(s) of the electrical circuit, put the starter switch key in the off (shut
down) position. When disconnecting batteries, always disconnect the negative (-) cable first. When
reconnecting batteries, always connect the negative (-) cable last.
Failure to comply could result in death or serious injury.
W0264A
WARNING
Electrical shock hazard!
Before working on any part of the electrical system, disconnect the battery ground cable. Complete
all electrical work before connecting the cable.
Failure to comply could result in death or serious injury.
W0129A
WARNING
Battery gas can explode!
To prevent an explosion: 1. Always disconnect the negative (-) battery cable first. 2. Always connect
the negative (-) battery cable last. 3. Do not short circuit the battery posts with metal objects. 4. Do
not weld, grind, or smoke near a battery.
Failure to comply could result in death or serious injury.
W0011A
WARNING
Explosion hazard!
When jump-starting the machine, connect and disconnect the jumper cables exactly as indicated in
this manual. DO NOT connect the jumper cables to the machine battery terminals. Make sure no
persons are near the connecting points before starting the engine. Start the engine from the operator’s
seat.
Failure to comply could result in death or serious injury.
W0342A
WARNING
Explosive gas!
Batteries emit explosive hydrogen gas and other fumes while charging. Ventilate the charging area.
Keep the battery away from sparks, open flames, and other ignition sources. Never charge a frozen
battery.
Failure to comply could result in death or serious injury.
W0005A
WARNING
Hazardous chemicals!
Battery electrolyte contains sulfuric acid. Contact with skin and eyes could result in severe irritation
and burns. Always wear splash-proof goggles and protective clothing (gloves and aprons). Wash
hands after handling.
Failure to comply could result in death or serious injury.
W0006A
48050419D 06/10/2017
3
9. INTRODUCTION
WARNING
Battery gas can explode!
To prevent an explosion: 1. Always disconnect the negative (-) battery cable first. 2. Always connect
the negative (-) battery cable last. 3. Do not short circuit the battery posts with metal objects. 4. Do
not weld, grind, or smoke near a battery.
Failure to comply could result in death or serious injury.
W0011A
WARNING
Explosion hazard!
If battery electrolyte is frozen, attempting to charge the battery or jump-start the engine can cause the
battery to explode. Always keep batteries at full charge to prevent frozen battery electrolyte. Never
charge a frozen battery.
Failure to comply could result in death or serious injury.
W0203A
WARNING
Improper operation or service of this machine can result in an accident.
An error connecting auxiliary starting cables or short-circuiting battery terminals can cause an acci-
dent. Connect auxiliary starting cables as instructed in this manual.
Failure to comply could result in death or serious injury.
W0263A
WARNING
Explosion hazard!
Batteries emit explosive gases. Always ventilate when using in an enclosed area or when charging.
Keep the battery away from sparks, open flames, and other ignition sources.
Failure to comply could result in death or serious injury.
W0369A
WARNING
Eye injury hazard!
Wear eye protection when jump-starting the machine and when charging the battery.
Failure to comply could result in death or serious injury.
W0382A
WARNING
Chemical hazard!
Battery acid can cause severe burns. Some batteries have a ventilation tube. If there is battery acid
in the tube, this acid can be released when the battery is turned upside down. If you turn the battery
upside down, point the ventilation tube away from you and any other people in the area.
Failure to comply could result in death or serious injury.
W1084A
48050419D 06/10/2017
4
10. INTRODUCTION
Variable displacement pump - Safety rules
845B ANZ --- APAC --- LA --- MEA --- NA
865B AWD Direct drive transmission, All wheel drive (AWD), Tier 3, made
in Brazil [HBZN0865TBAF00840 - ]
NA
865B ANZ --- APAC --- LA --- MEA --- NA
885B AWD Direct drive transmission, All wheel drive (AWD), Tier 3, made
in Brazil [HBZN0885TBAF00558 - ]
NA
885B ANZ --- APAC --- LA --- MEA --- NA
Personal safety
This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all
safety messages that follow this symbol to avoid possible death or injury.
Throughout this manual and on machine safety signs, you will find the signal words DANGER, WARNING, and CAU-
TION followed by special instructions. These precautions are intended for the personal safety of you and those
working with you.
Read and understand all the safety messages in this manual before you operate or service the machine.
DANGER indicates a hazardous situation that, if not avoided, will result in death or serious injury. The color
associated with DANGER is RED.
WARNING indicates a hazardous situation that, if not avoided, could result in death or serious injury. The color
associated with WARNING is ORANGE.
CAUTION indicates a hazardous situation that, if not avoided, could result in minor or moderate injury. The
color associated with CAUTION is YELLOW.
FAILURE TO FOLLOW DANGER, WARNING, AND CAUTION MESSAGES COULD RESULT
IN DEATH OR SERIOUS INJURY.
Machine safety
NOTICE: Notice indicates a situation that, if not avoided, could result in machine damage or property damage. The
color associated with Notice is BLUE.
Throughout this manual you will find the signal word Notice followed by special instructions to prevent machine dam-
age or property damage. The word Notice is used to address practices not related to personal safety.
Information
NOTE: Note indicates additional information that clarifies steps, procedures, or other information in this manual.
Throughout this manual you will find the word Note followed by additional information about a step, procedure, or
other information in the manual. The word Note is not intended to address personal safety or property damage.
48050419D 06/10/2017
5
11. SERVICE MANUAL
Transmission
845B Direct drive transmission, Tier 3, made in Brazil [HBZN0845VBAF00184
- ], 845B Torque converter transmission, Tier 3, made in Brazil
[HBZN0845VCAF01093 - ], 865B Direct drive transmission, Tier 3, made in
Brazil [NBAF15000 - ], 865B Torque converter transmission, Tier 3,made in
Brazil [NBAF14004 - ], 865B AWD Direct drive transmission, All wheel drive
(AWD), Tier 3, made in Brazil [HBZN0865TBAF00840 - ], 885B Direct drive
transmission, Tier 3, made in Brazil [HBZN0885LBAF00098 - ], 885B Torque
converter transmission, Tier 3, made in Brazil [HBZN0885PCAF00871 - ],
885B AWD Direct drive transmission, All wheel drive (AWD), Tier 3, made
in Brazil [HBZN0885TBAF00558 - ]
48050419D 06/10/2017
21
12. Transmission - Powershift transmission
Powershift transmission - Pressure test
845B Torque converter transmission, Tier 3, made in Brazil
[HBZN0845VCAF01093 - ]
(6 x 3 torque converter) OR (Tier 1) OR (Tier 3-VHP)
865B Torque converter transmission, Tier 3,made in Brazil [NBAF14004 - ] (6 x 3 torque converter) OR (Tier 2) OR (Tier 3-VHP) OR (Tier 0)
Measuring points
NOTE: Carry out measurements when the transmission has reached operating temperature(approx. 80 – 90 °C) can
be varied.
LAIL11MG1492F0A 1
48050419D 06/10/2017
21.1 [21.113] / 53
13. Transmission - Powershift transmission
LAIL11MG1493F0A 2
No. Denomination of item Connection
Designation at
valve block
Measuring points for oil pressure and temperature
51 Before the converter (opening pressure) – 11 – 13 bar M10 X 1.0 H
52 Before the converter (opening pressure) – 4.3 – 7.3 bar M10 X 1.0
53 Front clutch (KV) – 16 – 18 bar M10 X 1.0 B
55 Reverse clutch (KR) – 16 – 18 bar M10 X 1.0 AND
56 Clutch (K1) – 16 – 18 bar M10 X 1.0 D
57 Clutch (K2) – 16 – 18 bar M10 X 1.0 A
58 Clutch (K3) – 16 – 18 bar M10 X 1.0 C
60 Clutch (K4) – 16 – 18 bar M10 X 1.0 F
63 After the converter, Temperature 100 °C, short-term 120 °C M14 X 1.5
65 System pressure – 16 – 18.5 bar M10 X 1.0 K
Measuring points for flow rates
15 Connection to heat exchanger 1–5/16 in - 12 UN-2B
16 Connection from heat exchanger 1–5/16 in - 12 UN-2B
Inductive sensor, impulse sensor, speed sensor and switch
21 Inductive sensor – Turbine rotation M18 X 1.5
34 Speed sensor – Output
47 Inductive sensor – Central gear chain M18 X 1.5
48 Inductive sensor – Engine speed M18 X 1.5
54 Differential pressure switch for pressure filter M14 X 1.5
Connecting
10 Vent M10 x 1
49 Plug connection at electro-hydraulic control unit
48050419D 06/10/2017
21.1 [21.113] / 54
14. Transmission - Powershift transmission
Powershift transmission - Service instruction
845B Direct drive transmission, Tier 3, made in Brazil
[HBZN0845VBAF00184 - ]
(8 x 8 direct drive) OR (Tier 1) OR (Tier 3-VHP)
865B AWD Direct drive transmission, All wheel drive (AWD), Tier 3, made
in Brazil [HBZN0865TBAF00840 - ]
865B Direct drive transmission, Tier 3, made in Brazil [NBAF15000 - ] (8 x 8 direct drive) OR (Tier 2) OR (Tier 3-VHP) OR (Tier 0) OR (AWD)
Transmission lifting procedure
1. Use a lift sling similar to (A).
2. It should hold the transmission level without bending
the lift hangers (B).
LAIL11MG2000A0A 1
Repair stand
NOTE: The repair stand (A) used in this manual is an OTC
DIVISION product, part number 1735, and its capacity is
907 kg (2000 lb).
When any other stand is used, consult the Manufac-
turer’s instructions for mounting.
The approximate empty weight is 545 kg (1202 lb).
NOTE: The exact weights depend on the options included.
LAIL11MG1372A0A 2
Fixing the transmission to the repair stand
NOTE: See “Special Tools” for the Assembly Stand Plate
drawings.
LAIL11MG1654A0A 3
48050419D 06/10/2017
21.1 [21.113] / 55
15. Transmission - Powershift transmission
Powershift transmission - Service instruction
885B AWD Direct drive transmission, All wheel drive (AWD), Tier 3, made
in Brazil [HBZN0885TBAF00558 - ]
885B Direct drive transmission, Tier 3, made in Brazil [HBZN0885LBAF00098
- ]
(8 x 8 direct drive) OR (Tier 2) OR (Tier 3-VHP) OR (Tier 0) OR (AWD)
Transmission lifting procedure
1. Use a lift sling similar to (A).
2. It should hold the transmission level without bending
the lift hangers (B).
LAIL11MG2012A0A 1
Repair stand
NOTE: The repair stand (A) used in this manual is an OTC
DIVISION product, part number 1735, and its capacity is
907 kg (2000 lb).
When any other stand is used, consult the Manufac-
turer’s instructions for mounting.
The approximate empty weight is 703 kg (1550 lb).
NOTE: The exact weights depend on the options included.
LAIL11MG2013A0A 2
Fixing the transmission (DF series) to the repair stand
NOTE: See “Special Tools” for the Assembly Stand Plate
drawings.
LAIL11MG1916A0A 3
48050419D 06/10/2017
21.1 [21.113] / 56
16. Transmission - Powershift transmission
Powershift transmission - Disassemble
845B Torque converter transmission, Tier 3, made in Brazil
[HBZN0845VCAF01093 - ]
(6 x 3 torque converter) OR (Tier 1) OR (Tier 3-VHP)
865B Torque converter transmission, Tier 3,made in Brazil [NBAF14004 - ] (6 x 3 torque converter) OR (Tier 2) OR (Tier 3-VHP) OR (Tier 0)
P.T.O.
1. Loosen the hexagonal headed bolts (1) and remove the
cover (2).
LAIL11MG0137A0A 1
2. Remove the O-ring (1) from the cover and loosen the
Allen screws (2).
LAIL11MG0138A0A 2
3. Remove the flange (1) and the O-ring (2).
4. Loosen the hex nuts and remove both covers (3) with
the O-rings.
5. Remove circlip (4).
LAIL11MG0139A0A 3
48050419D 06/10/2017
21.1 [21.113] / 57
17. Transmission - Powershift transmission
6. Pull the pump shaft (1) out of the housing bore.
7. Remove the rectangular ring (2).
LAIL11MG0140A0A 4
8. Press the ball bearing (1) off the pump shaft.
LAIL11MG0141A0A 5
48050419D 06/10/2017
21.1 [21.113] / 58
18. Transmission - Powershift transmission
Powershift transmission - Assemble
845B Torque converter transmission, Tier 3, made in Brazil
[HBZN0845VCAF01093 - ]
(6 x 3 torque converter) OR (Tier 1) OR (Tier 3-VHP)
865B Torque converter transmission, Tier 3,made in Brazil [NBAF14004 - ] (6 x 3 torque converter) OR (Tier 2) OR (Tier 3-VHP) OR (Tier 0)
P.T.O.
1. For a shaft pump without a “Lock-up” clutch, press the
ball bearing (1) into the pump bearing (2) until contact
is made.
LAIL11MG0161A0A 1
2. For a shaft pump with a “Lock-up” clutch, install the
four-point bearing (1) in the pump shaft.
3. Press the lower bearing inner ring to the contact posi-
tion.
4. Position the ball bearing.
5. Press the upper bearing inner ring to the contact posi-
tion.
6. Adjust the axial play of 0.0 – 0.05 mm using a retaining
ring (2), with a thickness of between 2.2 – 2.5 mm (in
steps of 0.05 mm.
LAIL11MG0162A0A 2
7. Install the rectangular ring (1).
50 x 2.5 without a Lock-up clutch
60 x 3 with a Lock-up clutch
8. Grease and centrically align rectangular ring.
9. Install the pump shaft (2) until contact is obtained.
LAIL11MG0163A0A 3
48050419D 06/10/2017
21.1 [21.113] / 59
19. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
20. Transmission - Powershift transmission
10. Fix the pump shaft by means of an 85 x 3 retaining
ring (1).
11. Install the O-ring 104 x 3 (2) onto the flange (3) and
then grease it and bring it into the contact position on
the rear part of the housing.
LAIL11MG0164A0A 4
12. Fix the flange with Allen screws (1).
13. Insert the O-ring 130 x 3 (2) into the hole of the flange
and grease it.
Tightening torque (M16/8.8 x 30) MA = 195 N·m
LAIL11MG0165A0A 5
14. Place the cover sheet (1) on the flange and fix it with
hex screws (2).
Tightening torque (M16/8.8 x 20) MA = 46 N·m
LAIL11MG0166A0A 6
15. For the lubrication line for the version with a “Lock-up”
clutch, install the PTO for the lubrication line
(1) Lubrication line PTO.
(2) Banjo bolt (6 – DIN 7643) seal ring (A-10 CU).
(3) Screw neck (SDS-L6 10 X 1) O-ring (10 X 1).
LAIL11MG0167A0A 7
48050419D 06/10/2017
21.1 [21.113] / 60
21. Transmission - Powershift transmission
Powershift transmission - Calibrate
845B Direct drive transmission, Tier 3, made in Brazil
[HBZN0845VBAF00184 - ]
(8 x 8 direct drive) OR (Tier 1) OR (Tier 3-VHP)
865B AWD Direct drive transmission, All wheel drive (AWD), Tier 3, made
in Brazil [HBZN0865TBAF00840 - ]
865B Direct drive transmission, Tier 3, made in Brazil [NBAF15000 - ] (8 x 8 direct drive) OR (Tier 2) OR (Tier 3-VHP) OR (Tier 0) OR (AWD)
885B AWD Direct drive transmission, All wheel drive (AWD), Tier 3, made
in Brazil [HBZN0885TBAF00558 - ]
885B Direct drive transmission, Tier 3, made in Brazil [HBZN0885LBAF00098
- ]
(8 x 8 direct drive) OR (Tier 2) OR (Tier 3-VHP) OR (Tier 0) OR (AWD)
Transmission Calibration
Reasons to calibrate the transmission:
1. To make the Transmission Control Unit (TCU) work with the transmission.
2. To reduce the impact of manufacturing tolerances.
3. To provide consistency between machines. The calibration process ensures that each transmission clutch is
activated from the same point, before the clutch coupling.
When to calibrate:
1. If the solenoid valve assembly has been replaced.
2. After repairs that involve the transmission gears.
3. If the Transmission Control Unit (TCU) has been replaced.
4. If shifting quality deteriorates.
Calibration of the Transmission Clutches
1. Start the engine on a flat, level, firm surface away from
any obstacles. Move the machine back and forth to
warm up the transmission oil.
NOTE: The transmission oil temperature should be be-
tween 60 – 71 °C (140 – 160 °F) for the calibration to be
effective.
2. Bring the machine to a stop.
3. Support the implements on the ground.
4. Set the parking brake. Put the ignition switch in the
“OFF” position.
5. Clear the area of unauthorized personnel.
6. The fuse compartment is located on the bottom of the
right-hand console in the operator's cab. Open the
compartment to access connectors (X36) and (X37).
COIL15GRD0040AA 1
48050419D 06/10/2017
21.1 [21.113] / 61
22. Transmission - Powershift transmission
7. Remove the seal from connector (X37).
8. Connect a connector (X37) that makes a bridge [con-
nects pin (A) to pin (B)] on the calibration connector of
the machine's wiring harness (X36).
ATTENTION: Any error that appears during calibration will
cause the process to terminate. You must re-start the cali-
bration process from the beginning.
COIL15GRD0059BA 2
COIL15GRD0039BA 3
48050419D 06/10/2017
21.1 [21.113] / 62