This document is a service manual section covering general information about a Blackhawk Stern Drive Unit. It includes directions on how to use the manual, defines common terms, and provides important safety information. Specifically, it outlines the 10-hour break-in period for new or rebuilt drive units, serial number location, differences between the Blackhawk and Bravo drive units, and instructions for converting a Bravo transom to the high-performance Blackhawk version.
Mercury mer cruiser blackhawk stern drive unit 1997 service repair manualfjkskemdmm
This document is a service manual for the Blackhawk Stern Drive Unit. It provides information on maintenance, troubleshooting, removal and installation of the stern drive unit. The manual outlines the sections and subsections that make up the service manual. It provides important safety information and describes how to properly use the manual. It also includes details about break-in procedures, part numbering conventions, directional references, and propeller rotation. Additionally, it notes some differences between the Blackhawk and Bravo stern drive units, such as modifications needed for a high performance transom assembly without electrical trim components.
Mercury mer cruiser blackhawk stern drive unit 1997 service repair manualfjsjjekdkme
This document is a service manual section that provides general information about a Blackhawk Stern Drive unit. It includes directions on how to use the manual, defines terms like port and starboard, explains propeller rotation, and notes special information about the Blackhawk unit compared to the Bravo unit. It also provides a warning about trimming the drive unit beyond gimbal ring support without an electrical trim sender and limit switch.
Mercury mer cruiser blackhawk stern drive unit 1996 service repair manualhhjsekmdmm
This document is a service manual for the Blackhawk Stern Drive Unit. It provides information on using the manual, directional references, propeller rotation, a 10-hour break-in period for new or replacement gears, serial number location, special information on the Blackhawk compared to the Bravo, and converting a Bravo transom to the high-performance transom without electrical trim components. Warnings are provided about trimming beyond the point of gimbal ring support.
This document is a service manual for MerCruiser GM 4 cylinder 181 cid (3.0L) marine engines. It provides information on engine components, maintenance procedures, troubleshooting, removal and installation of engine systems, and specifications. Safety notices are included throughout to warn technicians of hazards.
This shop manual provides information needed to perform maintenance and repairs on a Kawasaki 60ZV-2 wheel loader. It includes sections on safety procedures, machine specifications and measurements, functions and structures of components, maintenance and adjustment procedures, and troubleshooting. The manual covers the chassis, power, hydraulic, transmission, brake, and electrical systems. It is intended to help technicians correctly diagnose and repair issues while ensuring worker safety.
Crown wp2300 s series pallet truck service repair manualcdfzxs
This document provides revisions and maintenance information for the WP2300S Series order number 812529-006. It includes:
- Revisions made to various pages and components, including additions and corrections to safety switches, platform control switches, and platform logic circuits.
- Sections covering maintenance procedures such as lubrication and adjustments, hydraulics, electrical components, brakes, steering and other systems.
- Electrical diagrams for standard and optional configurations of folded and fixed platforms.
Mercruiser #11 bravo one sterndrive unit service repair manual snb664190 and ...ufjjdjkskemem
This document is a service manual for Mercury Marine Bravo sterndrive units. It provides important safety information and outlines maintenance procedures that should be performed by owners/operators and dealers. The manual also contains troubleshooting guides for issues with the sterndrive unit, performance, power steering, power trim, and electrical systems. Specifications, fluid capacities, and torque values are included to aid technicians in repair work. The document is organized into sections covering general information, removal/installation, specific drive unit models, transom assemblies, power trim, steering, corrosion protection, and accessories.
Toro groundsmaster 7200 service repair manualfudfjjjskefkme
This document is a service manual for the Groundsmaster 7200 and 7210 machines. It provides safety instructions for operators, supervisors and service technicians. Key points include following all safety guidelines in the operator's manual, wearing proper protective equipment during maintenance, and lowering any attachments before servicing to avoid accidental lowering. The manual instructs technicians to review all sections on safety, the diesel engine, hydraulic and electrical systems, chassis and cutting deck.
Mercury mer cruiser blackhawk stern drive unit 1997 service repair manualfjkskemdmm
This document is a service manual for the Blackhawk Stern Drive Unit. It provides information on maintenance, troubleshooting, removal and installation of the stern drive unit. The manual outlines the sections and subsections that make up the service manual. It provides important safety information and describes how to properly use the manual. It also includes details about break-in procedures, part numbering conventions, directional references, and propeller rotation. Additionally, it notes some differences between the Blackhawk and Bravo stern drive units, such as modifications needed for a high performance transom assembly without electrical trim components.
Mercury mer cruiser blackhawk stern drive unit 1997 service repair manualfjsjjekdkme
This document is a service manual section that provides general information about a Blackhawk Stern Drive unit. It includes directions on how to use the manual, defines terms like port and starboard, explains propeller rotation, and notes special information about the Blackhawk unit compared to the Bravo unit. It also provides a warning about trimming the drive unit beyond gimbal ring support without an electrical trim sender and limit switch.
Mercury mer cruiser blackhawk stern drive unit 1996 service repair manualhhjsekmdmm
This document is a service manual for the Blackhawk Stern Drive Unit. It provides information on using the manual, directional references, propeller rotation, a 10-hour break-in period for new or replacement gears, serial number location, special information on the Blackhawk compared to the Bravo, and converting a Bravo transom to the high-performance transom without electrical trim components. Warnings are provided about trimming beyond the point of gimbal ring support.
This document is a service manual for MerCruiser GM 4 cylinder 181 cid (3.0L) marine engines. It provides information on engine components, maintenance procedures, troubleshooting, removal and installation of engine systems, and specifications. Safety notices are included throughout to warn technicians of hazards.
This shop manual provides information needed to perform maintenance and repairs on a Kawasaki 60ZV-2 wheel loader. It includes sections on safety procedures, machine specifications and measurements, functions and structures of components, maintenance and adjustment procedures, and troubleshooting. The manual covers the chassis, power, hydraulic, transmission, brake, and electrical systems. It is intended to help technicians correctly diagnose and repair issues while ensuring worker safety.
Crown wp2300 s series pallet truck service repair manualcdfzxs
This document provides revisions and maintenance information for the WP2300S Series order number 812529-006. It includes:
- Revisions made to various pages and components, including additions and corrections to safety switches, platform control switches, and platform logic circuits.
- Sections covering maintenance procedures such as lubrication and adjustments, hydraulics, electrical components, brakes, steering and other systems.
- Electrical diagrams for standard and optional configurations of folded and fixed platforms.
Mercruiser #11 bravo one sterndrive unit service repair manual snb664190 and ...ufjjdjkskemem
This document is a service manual for Mercury Marine Bravo sterndrive units. It provides important safety information and outlines maintenance procedures that should be performed by owners/operators and dealers. The manual also contains troubleshooting guides for issues with the sterndrive unit, performance, power steering, power trim, and electrical systems. Specifications, fluid capacities, and torque values are included to aid technicians in repair work. The document is organized into sections covering general information, removal/installation, specific drive unit models, transom assemblies, power trim, steering, corrosion protection, and accessories.
Toro groundsmaster 7200 service repair manualfudfjjjskefkme
This document is a service manual for the Groundsmaster 7200 and 7210 machines. It provides safety instructions for operators, supervisors and service technicians. Key points include following all safety guidelines in the operator's manual, wearing proper protective equipment during maintenance, and lowering any attachments before servicing to avoid accidental lowering. The manual instructs technicians to review all sections on safety, the diesel engine, hydraulic and electrical systems, chassis and cutting deck.
Yamaha 150 aet, c150tr outboard service repair manual l 305521 fjkskekkemmmd
This document is a service manual that provides information for servicing various Yamaha outboard motor models. It contains chapters covering general information, specifications, periodic inspections and adjustments, fuel system, power unit, lower unit, bracket unit, electrical systems, and trouble analysis. The general information chapter discusses identification, safety practices, tools, and assembly/disassembly procedures. It also provides a detailed list of special tools recommended for servicing tasks, including tools for measuring components, removing and installing parts like bearings and seals.
Yamaha 50 geto outboard service repair manual l 400805 fjkskekkemmmd
This document is a service manual that provides specifications, inspection and adjustment procedures, troubleshooting information, and general information for maintaining various Yamaha outboard motor models. It lists special tools that are recommended for accurate assembly, adjustment, and repair of the motors. These include tools for measuring idle speed, ignition and electrical systems, fuel components, lower unit components, pinion and forward gearcase shimming, and more. Proper tools and safety practices are emphasized to protect parts from damage during disassembly and reassembly.
Yale a875 gdp040 060 rg-tg-zg lift truck service repair manualfjkskekkemmmd
This document provides a service manual for repairing and maintaining various components of a forklift. It includes sections on repairing the operator module, frame, hood, side covers, and other parts. Safety warnings are provided for putting the forklift on blocks during maintenance. Descriptions and procedures are given for removing and installing the operator module, hood, side covers, and other components.
Valtra valmet 6000 tractor service repair manualfjkskekkemmmd
This document is a workshop manual for Valtra tractors models 6000-8950. It provides:
1) An overview of the manual's organization into groups and components with three-digit code designations to identify pages.
2) Instructions for inserting new and updated pages based on the code designations.
3) A list of the code designations for each system covered in the manual (e.g. engine, transmission, brakes, etc.) along with the topics covered on each page.
4) Information on supplements issued with additional instructions, including notes on the topics and date each was published.
Toyota 7 fb10 forklift service repair manualfjkskekkemmmd
The document is an introduction and table of contents for a service manual covering Toyota electric forklifts from 1999. It outlines the vehicle models, components, and maintenance procedures covered in the manual to aid technicians in correctly servicing the forklifts. The manual is intended to be used as a reference for repairs, diagnostics, and specifications for various systems on the listed forklift models.
Toyota 02 5 fd33 forklift service repair manualfjkskekkemmmd
This document provides an overview manual for servicing the Toyota Forklift 5FGi5FD33 - 45 series. It covers service procedures for models produced from 1988 to 1994, with some differences noted for minor changes made in 1994. The manual is compiled from two previous repair manuals and covers topics like vehicle listings, abbreviations, torque specifications, inspection methods and periodic maintenance. It provides general information needed for servicing components of these forklift models.
Toyota 02 5fd10 forklift service repair manualfjkskekkemmmd
This manual provides service procedures for the TOYOTA FORKLIFT 5FG10-30/5FD70-30 Series from August 1986 to August 1989. It covers models with 4P, 4Y, 2J, 1Z, and 7Z engines. The document lists the vehicle models and specifications, provides exterior views of the vehicles, and references repair manuals for the mounted engines. It also includes sections on standard bolt tightening torques, high pressure hose fitting torques, and lists the vehicle frame number format and locations. The manual is intended to help provide quick and correct servicing for the corresponding forklift models.
New holland ls140 skid steer loader parts catalogue manualfjkskekkemmmd
This document is a parts catalog for New Holland LS140 and LS150 loaders. It contains over 200 pages detailing all engine, hydraulic, electrical, sheet metal, and other parts. The catalog includes pictorial indexes, part numbers, descriptions and applies to models LS140 and LS150.
New holland c185 skid steer (compact track loader) parts catalogue manualfjkskekkemmmd
This document is a parts catalog for L185/C185 Skid Steer/Compact Track Loaders. It contains:
- A table of contents listing the sections and parts included
- Revision history information
- Sections covering the engine and its components, fuel system, electrical system, powertrain, brakes, hydraulics, and chassis/attachments
- An index for locating specific parts
The parts catalog provides exploded views and part numbers for replacing or repairing parts for L185/C185 Skid Steer/Compact Track Loaders. It is intended as a reference for technicians and operators to service and maintain the machines.
Mitsubishi fd40 n forklift trucks service repair manual sn ef12b 00011-upfjkskekkemmmd
This chapter of the service manual provides information about the cooling system for a range of forklift models. It includes specifications, an overview of cooling system components, instructions for removing and installing the fan belt, and procedures for inspecting and adjusting the radiator, hoses, coolant, and other parts. Troubleshooting tips are also provided. The key aspects covered are removing and installing the fan belt, inspecting the radiator and hoses, checking the coolant, and troubleshooting common cooling system issues.
Kioti daedong dk35 tractor service repair manualfjkskekkemmmd
The document provides general information about tractors, including:
- Tightening torque specifications for standard bolts and nuts of different sizes
- Identification information like engine and chassis serial numbers
- Specifications for engine, transmission, hydraulic system, dimensions, and other components for different tractor models
- Maintenance instructions and a regular check list for items to inspect at various hourly intervals.
Kioti daedong ck20 tractor service repair manualfjkskekkemmmd
This document provides an overview of safety information and maintenance procedures for a tractor. It discusses safety precautions for starting the engine, servicing, working on the tractor, avoiding fires, disposing of fluids properly, ventilating work areas, preventing acid burns, and preparing for emergencies. It also provides an overview of the safety decals installed on the tractor and care instructions for labels. The document directs the reader to subsequent chapters that describe the mechanisms, troubleshooting, specifications, and servicing procedures for various tractor components in detail.
Jcb 525 58 telescopic handler service repair manual all561001 onwardsfjkskekkemmmd
This document provides specifications for fluids, lubricants, capacities and torque settings for various JCB machine models including 525, 527, 530, 535 and 537 models. It specifies the recommended engine oil, transmission fluid, hydraulic fluid, grease, coolant and other fluids to use in the machines, along with their capacities. It also provides torque settings for fasteners and notes that new engines do not require a break-in period and should be used immediately in normal work cycles.
Jcb 505 19 telescopic handler service repair manual all561001-579365fjkskekkemmmd
This document provides fluid, lubricant and specification information for various JCB machines:
- Lists recommended engine oils, transmission fluids, hydraulic fluids, gear oils, greases and other specifications for 505-19/22, 506-36, 508-40, 510-40 and 506B machines.
- Notes that new engines do not require a running-in period and should be used immediately in normal work cycles to avoid glazing. The first engine oil should be changed after 100 hours.
- Provides coolant mixture recommendations and capacities for hydraulic tanks, transmission systems, axles and other components.
Case 2050 m stage iiib crawler dozer service repair manual (pin nfdc20000 and...fjkskekkemmmd
This document is a service manual for CNH Industrial 2050M Stage IIIB crawler dozers with various undercarriage configurations. It provides maintenance and repair information for major systems including the engine, hydrostatic drive, brakes and controls, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, and electrical systems. The manual includes over 50 sections covering components, operation, and troubleshooting guidelines.
Case 1150 m tier 2 crawler dozer service repair manual (pin nddc11000 and above)fjkskekkemmmd
This document is a service manual for the Case 1150M Tier 2 Crawler Dozer that provides instructions for repair and maintenance of the dozer. It includes sections on the engine, hydrostatic drive, brakes and controls, hydraulic systems, tracks and track suspension, cab climate control, electrical systems, dozer blade and arm, and platform, cab, bodywork, and decals. The manual instructs that all repair and maintenance work be carried out only by qualified dealership personnel strictly following the instructions given and using special tools whenever possible.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Yamaha 150 aet, c150tr outboard service repair manual l 305521 fjkskekkemmmd
This document is a service manual that provides information for servicing various Yamaha outboard motor models. It contains chapters covering general information, specifications, periodic inspections and adjustments, fuel system, power unit, lower unit, bracket unit, electrical systems, and trouble analysis. The general information chapter discusses identification, safety practices, tools, and assembly/disassembly procedures. It also provides a detailed list of special tools recommended for servicing tasks, including tools for measuring components, removing and installing parts like bearings and seals.
Yamaha 50 geto outboard service repair manual l 400805 fjkskekkemmmd
This document is a service manual that provides specifications, inspection and adjustment procedures, troubleshooting information, and general information for maintaining various Yamaha outboard motor models. It lists special tools that are recommended for accurate assembly, adjustment, and repair of the motors. These include tools for measuring idle speed, ignition and electrical systems, fuel components, lower unit components, pinion and forward gearcase shimming, and more. Proper tools and safety practices are emphasized to protect parts from damage during disassembly and reassembly.
Yale a875 gdp040 060 rg-tg-zg lift truck service repair manualfjkskekkemmmd
This document provides a service manual for repairing and maintaining various components of a forklift. It includes sections on repairing the operator module, frame, hood, side covers, and other parts. Safety warnings are provided for putting the forklift on blocks during maintenance. Descriptions and procedures are given for removing and installing the operator module, hood, side covers, and other components.
Valtra valmet 6000 tractor service repair manualfjkskekkemmmd
This document is a workshop manual for Valtra tractors models 6000-8950. It provides:
1) An overview of the manual's organization into groups and components with three-digit code designations to identify pages.
2) Instructions for inserting new and updated pages based on the code designations.
3) A list of the code designations for each system covered in the manual (e.g. engine, transmission, brakes, etc.) along with the topics covered on each page.
4) Information on supplements issued with additional instructions, including notes on the topics and date each was published.
Toyota 7 fb10 forklift service repair manualfjkskekkemmmd
The document is an introduction and table of contents for a service manual covering Toyota electric forklifts from 1999. It outlines the vehicle models, components, and maintenance procedures covered in the manual to aid technicians in correctly servicing the forklifts. The manual is intended to be used as a reference for repairs, diagnostics, and specifications for various systems on the listed forklift models.
Toyota 02 5 fd33 forklift service repair manualfjkskekkemmmd
This document provides an overview manual for servicing the Toyota Forklift 5FGi5FD33 - 45 series. It covers service procedures for models produced from 1988 to 1994, with some differences noted for minor changes made in 1994. The manual is compiled from two previous repair manuals and covers topics like vehicle listings, abbreviations, torque specifications, inspection methods and periodic maintenance. It provides general information needed for servicing components of these forklift models.
Toyota 02 5fd10 forklift service repair manualfjkskekkemmmd
This manual provides service procedures for the TOYOTA FORKLIFT 5FG10-30/5FD70-30 Series from August 1986 to August 1989. It covers models with 4P, 4Y, 2J, 1Z, and 7Z engines. The document lists the vehicle models and specifications, provides exterior views of the vehicles, and references repair manuals for the mounted engines. It also includes sections on standard bolt tightening torques, high pressure hose fitting torques, and lists the vehicle frame number format and locations. The manual is intended to help provide quick and correct servicing for the corresponding forklift models.
New holland ls140 skid steer loader parts catalogue manualfjkskekkemmmd
This document is a parts catalog for New Holland LS140 and LS150 loaders. It contains over 200 pages detailing all engine, hydraulic, electrical, sheet metal, and other parts. The catalog includes pictorial indexes, part numbers, descriptions and applies to models LS140 and LS150.
New holland c185 skid steer (compact track loader) parts catalogue manualfjkskekkemmmd
This document is a parts catalog for L185/C185 Skid Steer/Compact Track Loaders. It contains:
- A table of contents listing the sections and parts included
- Revision history information
- Sections covering the engine and its components, fuel system, electrical system, powertrain, brakes, hydraulics, and chassis/attachments
- An index for locating specific parts
The parts catalog provides exploded views and part numbers for replacing or repairing parts for L185/C185 Skid Steer/Compact Track Loaders. It is intended as a reference for technicians and operators to service and maintain the machines.
Mitsubishi fd40 n forklift trucks service repair manual sn ef12b 00011-upfjkskekkemmmd
This chapter of the service manual provides information about the cooling system for a range of forklift models. It includes specifications, an overview of cooling system components, instructions for removing and installing the fan belt, and procedures for inspecting and adjusting the radiator, hoses, coolant, and other parts. Troubleshooting tips are also provided. The key aspects covered are removing and installing the fan belt, inspecting the radiator and hoses, checking the coolant, and troubleshooting common cooling system issues.
Kioti daedong dk35 tractor service repair manualfjkskekkemmmd
The document provides general information about tractors, including:
- Tightening torque specifications for standard bolts and nuts of different sizes
- Identification information like engine and chassis serial numbers
- Specifications for engine, transmission, hydraulic system, dimensions, and other components for different tractor models
- Maintenance instructions and a regular check list for items to inspect at various hourly intervals.
Kioti daedong ck20 tractor service repair manualfjkskekkemmmd
This document provides an overview of safety information and maintenance procedures for a tractor. It discusses safety precautions for starting the engine, servicing, working on the tractor, avoiding fires, disposing of fluids properly, ventilating work areas, preventing acid burns, and preparing for emergencies. It also provides an overview of the safety decals installed on the tractor and care instructions for labels. The document directs the reader to subsequent chapters that describe the mechanisms, troubleshooting, specifications, and servicing procedures for various tractor components in detail.
Jcb 525 58 telescopic handler service repair manual all561001 onwardsfjkskekkemmmd
This document provides specifications for fluids, lubricants, capacities and torque settings for various JCB machine models including 525, 527, 530, 535 and 537 models. It specifies the recommended engine oil, transmission fluid, hydraulic fluid, grease, coolant and other fluids to use in the machines, along with their capacities. It also provides torque settings for fasteners and notes that new engines do not require a break-in period and should be used immediately in normal work cycles.
Jcb 505 19 telescopic handler service repair manual all561001-579365fjkskekkemmmd
This document provides fluid, lubricant and specification information for various JCB machines:
- Lists recommended engine oils, transmission fluids, hydraulic fluids, gear oils, greases and other specifications for 505-19/22, 506-36, 508-40, 510-40 and 506B machines.
- Notes that new engines do not require a running-in period and should be used immediately in normal work cycles to avoid glazing. The first engine oil should be changed after 100 hours.
- Provides coolant mixture recommendations and capacities for hydraulic tanks, transmission systems, axles and other components.
Case 2050 m stage iiib crawler dozer service repair manual (pin nfdc20000 and...fjkskekkemmmd
This document is a service manual for CNH Industrial 2050M Stage IIIB crawler dozers with various undercarriage configurations. It provides maintenance and repair information for major systems including the engine, hydrostatic drive, brakes and controls, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, and electrical systems. The manual includes over 50 sections covering components, operation, and troubleshooting guidelines.
Case 1150 m tier 2 crawler dozer service repair manual (pin nddc11000 and above)fjkskekkemmmd
This document is a service manual for the Case 1150M Tier 2 Crawler Dozer that provides instructions for repair and maintenance of the dozer. It includes sections on the engine, hydrostatic drive, brakes and controls, hydraulic systems, tracks and track suspension, cab climate control, electrical systems, dozer blade and arm, and platform, cab, bodywork, and decals. The manual instructs that all repair and maintenance work be carried out only by qualified dealership personnel strictly following the instructions given and using special tools whenever possible.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Dahua provides a comprehensive guide on how to install their security camera systems. Learn about the different types of cameras and system components, as well as the installation process.
Charging Fueling & Infrastructure (CFI) Program Resources by Cat PleinForth
Cat Plein, Development & Communications Director of Forth, gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Charging and Fueling Infrastructure Grant: Round 2 by Brandt HertensteinForth
Brandt Hertenstein, Program Manager of the Electrification Coalition gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Charging Fueling & Infrastructure (CFI) Program by Kevin MillerForth
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Charging Fueling & Infrastructure (CFI) Program by Kevin Miller
Mercury mer cruiser blackhawk stern drive unit 1994 service repair manual
1. Printed in U.S.A. 90-823228 1-694
1994, Brunswick Corporation
Blackhawk Stern Drive Unit
Number 20
2. NOTICE
This service manual covers the Blackhawk Stern
Drive Unit only and is to be used in conjunction
with the Bravo Stern Drive Unit service manual.
For transom, trim, steering and corrosion informa-
tion, refer to the appropriate section in the Bravo
Stern Drive Unit service manual.
NOTICE
Refer to appropriate engine service manual for en-
gine repair.
Stern Drive Unit – Blackhawk
Service Manual Outline
SECTION 1 - Important Information
A - General Information
B - Maintenance
C - Troubleshooting
SECTION 2 - Removal and Installation
A - All Models
SECTION 3 - Stern Drive Unit
A - Upper Drive Components
B - Lower Drive Components
i
3. Notice
Throughout this publication, “Dangers,” “Warn-
ings” and “Cautions” are used to alert the mechan-
ic to special instructions concerning a particular
service or operation that may be hazardous if per-
formed incorrectly or carelessly. OBSERVE THEM
CAREFULLY!
These “Safety Alerts” alone cannot eliminate the
hazards that they signal. Strict compliance to
these special instructions when performing the
service, plus “common sense” operation, are ma-
jor accident prevention measures.
! DANGER
DANGER - Immediate hazards which WILL result in
severe personal injury or death.
! WARNING
WARNING - Hazards or unsafe practices which
COULD result in severe personal injury or death.
! CAUTION
CAUTION - Hazards or unsafe practices which
could result in minor personal injury or product or
property damage.
IMPORTANT: Indicates information or instructions
that are necessary for proper operation and/or
maintenance.
Notice to Users of This Manual
This service manual has been written and published by
the service department of Mercury Marine to aid our
dealers, mechanics and company service personnel
when servicing the product described herein.
It is assumed that these personnel are familiar with the
servicing procedures of this product, or like or similar
products manufactured and marketed by Mercury Ma-
rine, and that they have been trained in the recom-
mended servicing procedures of these products which
include the use of mechanic’s common hand tools and
the special Mercury Marine or recommended tools
from other suppliers.
We could not possibly know of and advise the service
trade of all conceivable procedures by which a service
might be performed and of all possible hazards and/or
results of each method. We have not undertaken any
such wide evaluation. Therefore, anyone who uses a
service procedure and/or tool, which is not recom-
mended by the manufacturer, first must completely
satisfy himself that neither his nor the product’s safety
will be endangered by the service procedure selected.
All information, illustrations and specifications con-
tained in this manual are based on the latest product
information available at time of publication.
As required, revisions to this manual will be sent to all
dealers contracted by us to sell and/or service these
products.
Replacement Parts
! WARNING
Electrical, ignition and fuel system components
on gasoline engines and MerCruiser Stern Drives
are designed and manufactured to comply with
U.S. Coast Guard Rules and Regulations to
minimize risks of fire or explosion.
Use of replacement electrical, ignition or fuel system
components, which do not comply to these rules and
regulations, could result in a fire or explosion hazard
and should be avoided.
When servicing the electrical, ignition and fuel sys-
tems, it is extremely important that all components are
properly installed and tightened. If not, any electrical or
ignition component opening would permit sparks to ig-
nite fuel vapors from fuel system leaks, if they exist or
develop.
! WARNING
Electrical system components on diesel engines
are not external ignition protected. DO NOT
STORE OR USE GASOLINE ON BOATS EQUIPPED
WITH THESE ENGINES, UNLESS PROVISIONS
HAVE BEEN MADE TO EXCLUDE GASOLINE
VAPORS FROM ENGINE COMPARTMENT (ref: 33
CFR). Failure to comply could result in fire,
explosion and/or severe personal injury.
ii
4. 90-823228 692
1A - GENERAL INFORMATION
IMPORTANT INFORMATION
GENERAL INFORMATION
1
A
72436
6. GENERAL INFORMATION - 1A - 1
90-823228 1-694
How to Use This Manual
This manual is divided into sections which represent
major components and systems.
Some sections are further divided into parts which
more fully describe the component.
Sections and parts are listed at the front of this manu-
al.
Page Numbering
Two number groups appear at the bottom of each
page. Following is an example and description.
72426
How to Read Parts Manual
72427
a. Part Number: Part must be ordered by complete
part number.
b. Reference Number: Number of part on exploded
parts view.
c. Description: This column provides important in-
formation.
(1) Description of part: Reference 1 on parts list
is BELL HOUSING ASSEMBLY, reference
12 is an exhaust bellows CLAMP and refer-
ence 19 is a TIE STRAP.
(2) What parts are included: Reference 1 on the
parts list is BELL HOUSING ASSEMBLY.
Parts listed under the assembly are in-
dented, which indicates that they are in-
cluded. Therefore, if Part Number 41646A3
is ordered, you will receive the bell housing
assembly, including six studs and one water
hose insert.
(3) Serial number break: If serial number is
listed, check product serial number to ensure
that correct part is ordered.
7. 1A - 2 - GENERAL INFORMATION 90-823228 1-694
(4) Special information: Will often appear after
the description; i.e., O-ring on DSH, O-ring
on top cover, casting #1641-8293C1, etc.
This information enables you to select cor-
rect parts.
d. Quantity: Specifies quantity which must be or-
dered.
GEAR HOUSING
SEAL KIT
26-76868A1
INDICATED BY (*)
Access Hole Plug Kit 22-88847A1
contains all necessary parts to allow
removal of swivel shaft without re-
moving gimbal housing.
Introduction
This comprehensive overhaul and repair manual is
designed as a service guide. It provides specific infor-
mation, including procedures for disassembly, in-
spection, assembly and adjustment, to enable deal-
ers and service mechanics to repair this product.
Before attempting repairs, it is suggested that the pro-
cedure first be read through to gain knowledge of the
methods and tools used, and the cautions and warn-
ings required for safety.
Directional References
Front of boat is bow, rear is stern. Starboard side is
right side, port side is left side. In this service manual,
all directional references are given as they appear
when viewing boat from stern, looking toward bow.
72000
STARBOARD
(RIGHT)
PORT
(LEFT)
FORE or BOW
(FRONT)
AFT or STERN
(REAR)
Propeller Rotation
Propeller rotation for stern drive is as follows:
• Front Propeller - Left-Hand Rotation
• Rear Propeller - Right-Hand Rotation
71531
a - Front Propeller
b - Rear Propeller
b
a
8. GENERAL INFORMATION - 1A - 3
90-823228 1-694
Stern Drive Unit 10-Hour
Break-In Period (New or With
Replacement Gears)
1. Avoid full throttle starts.
2. DO NOT operate at any one constant speed for
extended periods of time.
3. DO NOT exceed 75% of full throttle during the first
5 hours. During the next 5 hours, operate at inter-
mittent full throttle.
4. Drive unit should be shifted into forward gear a
minimum of 10 times during break-in, with run-in
time at moderate RPM after each shift.
Serial Number Location
72434
a - Stern Drive Unit Serial Number
b - Stern Drive Unit Gear Ratio
Stern Drive Unit Serial Number Loca-
tion - Starboard Decal
a
b
Special Information
The Blackhawk drive unit uses the same transom as-
sembly as the Bravo drive unit with the following ex-
ceptions:
71678
71679
a - Spacers
Tilt Limit Spacers
a
a
71617
a - Spacer
Front Anchor Pin Spacers
a
9. 1A - 4 - GENERAL INFORMATION 90-823228 1-694
High Performance Transom
Assembly- Without Electrical Trim
Sender and Trim Limit Switch
IMPORTANT: The electrical Trim Limit Switch and
Trim Position Sender are not present on this tran-
som assembly. Without a Trim Limit Switch, the
drive unit can be trimmed up/out beyond the posi-
tion where the drive unit has side support from
the gimbal ring at any throttle setting. It is highly
recommended that a mechanical (cable actuated)
Trim Position Indicator be installed to provide im-
portant drive unit trim angle information to the
operator and that the Trim Indicator be marked to
clearly indicate the maximum up/out position
where side support is still provided. The drive
unit should not be trimmed to a position beyond
gimbal ring side support at engine speeds above
1200 RPM.
! WARNING
Avoid personal injury or damage to stern drive
unit. Do not trim drive unit to an up/out position
where the drive unit receives no side support
from the gimbal ring at engine speeds above 1200
RPM. Refer to a properly marked mechanical Trim
Position Indicator.
1. Install “WARNING DECAL” (Contained in the
transom assembly box) at the operator station in
a place where it will be clearly visible to the opera-
tor.
2. To mark the maximum “Trim Up/Out” position on
the mechanical trim indicator, proceed as follows:
a. Trim drive unit(s) to the “Full Down/In” posi-
tion.
b. Check to ensure that the mechanical trim indi-
cator indicates ”Full Down/In” position. Adjust
the indicator following the manufacturers rec-
ommendations.
c. Slowly raise the drive unit(s) until the trim limit
point is reached. The trim limit point can be
determined by measuring the amount of trim
cylinder extension. The dimension for the
Bravo and Blackhawk drive units is 21-3/4 in.
(552 mm) , which is measured from front an-
chor point to rear anchor point centerlines as
shown following.
50464
a - Trim Limit Dimension 21-3/4 in. (552 mm)
a
d. With the trim cylinders at this position, place
a mark on the mechanical trim indicator.
e. Raise and lower drive unit(s) several times to
ensure that the trim limit point is properly
marked.
10. Thank you very much
for your reading. Please
Click Here Then Get
More Information.
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
11. GENERAL INFORMATION - 1A - 5
90-823228 1-694
Convert Bravo Transom to
Hi-Performance Transom
IMPORTANT: The electrical Trim Limit Switch and
Trim Position Sender can no longer be used after
installing this kit. Without a Trim Limit Switch, the
drive unit can be trimmed up/out beyond the posi-
tion where the drive unit has side support from
the gimbal ring at any throttle setting. It is highly
recommended that a mechanical (cable actuated)
Trim Position Indicator be installed to provide im-
portant drive unit trim angle information to the
operator and that the Trim Indicator be marked to
clearly indicate the maximum up/out position
where side support is still provided. The drive
unit should not be trimmed to a position beyond
gimbal ring side support at engine speeds above
1200 RPM.
! WARNING
Avoid personal injury or damage to stern drive
unit. Do not trim drive unit to an up/out position
where the drive unit receives no side support
from the gimbal ring at engine speeds above 1200
RPM. Refer to a properly marked mechanical Trim
Position Indicator.
1. Install “WARNING DECAL” (Contained in this kit)
at the operator station in a place where it will be
clearly visible to the operator.
2. Remove stern drive unit.
3. Remove existing bell housing and gimbal ring.
Refer to the stern drive service manual.
4. Remove bracket that secures the trim limit and
trim position sender wires. Disconnect and re-
move the wires. Apply Quicksilver Perfect Seal to
rubber plug from conversion kit (822374A2) and
install it in the hole. Apply Perfect Seal to existing
screw and secure bracket over rubber plug.
Torque to 90-100 lb.in. (10.2-11.3 N⋅m).
70197
71840
a - Trim Limit and Trim Position Sender Wires
b - Bracket
c - Rubber Plug
d - Screw
a
b
b
c
d
d
12. 1A - 6 - GENERAL INFORMATION 90-823228 1-694
5. Insert hinge pin bushings into the bell housing.
74232
b
c
a
a - Hi-Performance Bell Housing
b - Bushing
c - Press
6. Install hinge pins using special tool (91-63616)
and slide hammer as follows:
a. Thread hinge pin onto special tool. Lubricate
hinge pins with Quicksilver Special Lubricant
101.
71828
a - Hinge Pin
b - Special Tool
a
b
b. Slide hinge pin through gimbal ring and bell
housing. Be sure to align screw holes in hinge
pin with holes in gimbal ring.
71827
a - Screw Holes
a
a
c. Lightly tap hinge pin into place using slide
hammer.
71826
a - Slide Hammer
a
13. GENERAL INFORMATION - 1A - 7
90-823228 1-694
d. Apply Loctite 242 to threads of screws and in-
stall. Torque screws to 25-30 lb.in. (2.8-3.3
N⋅m).
71825
a - Screws
a