The document provides service information for a wheel loader, including:
- An overview of engine specifications for models with 4-speed and 5-speed transmissions.
- Part numbers for the engine service manual in multiple languages.
- Instructions to remove the engine, which involve draining fluids, disconnecting hoses, and using straps to lift the hood and engine for removal. Technical details and diagrams are provided to correctly complete the removal process.
New holland w170 c tier 4b wheel loader service repair manualuudjjjkskkmem
This service manual provides maintenance and repair instructions for the W170C Wheel Loader. It includes sections covering the engine, transmission, four-wheel drive system, front and rear axle systems, brakes, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, and electrical systems. Safety precautions are provided, noting that only authorized personnel should perform repairs and maintenance after carefully reviewing the manual. Personal protective equipment should be worn when conducting repairs.
Case 721 f zbar wheel loader service repair manualujfdujjskkekmd
This document is a service manual for a wheel loader model 721F. It contains sections covering the engine, transmission, four-wheel drive system, front and rear axle systems, brakes and controls, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, electrical systems, front loader and bucket, and platform, cab, bodywork, and decals. Safety precautions are provided, noting hazards that could result in death, serious injury, or machine damage. Only authorized personnel should perform repairs or maintenance.
Case 621 g zbar eh, new cab tier2 wheel loader service repair manual [fnh06...ujdjkkskmme
This document is a service manual for wheel loaders models 621G and 721G. It contains sections covering the engine, transmission, four-wheel drive system, front and rear axle systems, brakes and controls, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, electrical systems, front loader and bucket, and the platform, cab, bodywork and decals. The manual provides maintenance and repair instructions for technicians, and stresses the importance of following all safety precautions when working on the equipment.
Case 621 f tier 4b (final) wheel loader service repair manualuudjjkkskmme
This service manual provides instructions for maintenance and repair of Case wheel loaders models 621F and 721F with Tier 4B engines. The manual covers the engine, transmission, four-wheel drive system, front and rear axle systems, brakes, hydraulic systems, frames, steering, wheels, cab climate control, electrical systems, front loader and bucket, platform, cab, and decals. Safety precautions are provided, and only authorized personnel should perform repairs.
New holland w130 c tier 4b (final) wheel loader service repair manualoekdmjkemme
The document provides specifications and removal instructions for engines in New Holland W130C and W170C wheel loaders. It lists operating RPM ranges and temperature specifications. The removal instructions include parking the machine, engaging the articulation lock, discharging brake accumulators, and releasing hydraulic pressure before removing the engine.
New holland speedrower 200 tier 3 self propelled windrower service repair man...ufjjsjekdkemme
This document is a service manual for the Speedrower 200 and 240 self-propelled windrowers. It contains instructions for servicing various engine, drivetrain, hydraulic, electrical, and other systems on the machines. The manual includes sections covering the engine, front and rear axles, hydrostatic drive, brakes, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, and electrical systems. It provides detailed procedures for maintenance, repair, and replacement of components.
New holland speedrower 200 tier 3 self propelled windrower service repair man...ufjjskekemem
This document is a service manual for the Speedrower 200 and 240 self-propelled windrowers. It contains instructions for servicing various engine, drivetrain, hydraulic, electrical, and other systems on the machines. The manual includes sections covering the engine, front and rear axles, hydrostatic drive, brakes, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, and electrical systems. It provides detailed procedures for maintenance, repair, and replacement of components.
New holland w170 c tier 4b wheel loader service repair manualujdjjjkskmme
This service manual provides maintenance and repair instructions for the W170C Wheel Loader. It contains 19 chapters covering the engine, transmission, axles, brakes, hydraulics, frames, steering, wheels, cab climate control, and electrical systems. Safety must be the top priority when servicing equipment, and only authorized personnel should perform repairs. Personal protective equipment should be worn, and all safety messages and instructions must be followed carefully.
New holland w170 c tier 4b wheel loader service repair manualuudjjjkskkmem
This service manual provides maintenance and repair instructions for the W170C Wheel Loader. It includes sections covering the engine, transmission, four-wheel drive system, front and rear axle systems, brakes, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, and electrical systems. Safety precautions are provided, noting that only authorized personnel should perform repairs and maintenance after carefully reviewing the manual. Personal protective equipment should be worn when conducting repairs.
Case 721 f zbar wheel loader service repair manualujfdujjskkekmd
This document is a service manual for a wheel loader model 721F. It contains sections covering the engine, transmission, four-wheel drive system, front and rear axle systems, brakes and controls, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, electrical systems, front loader and bucket, and platform, cab, bodywork, and decals. Safety precautions are provided, noting hazards that could result in death, serious injury, or machine damage. Only authorized personnel should perform repairs or maintenance.
Case 621 g zbar eh, new cab tier2 wheel loader service repair manual [fnh06...ujdjkkskmme
This document is a service manual for wheel loaders models 621G and 721G. It contains sections covering the engine, transmission, four-wheel drive system, front and rear axle systems, brakes and controls, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, electrical systems, front loader and bucket, and the platform, cab, bodywork and decals. The manual provides maintenance and repair instructions for technicians, and stresses the importance of following all safety precautions when working on the equipment.
Case 621 f tier 4b (final) wheel loader service repair manualuudjjkkskmme
This service manual provides instructions for maintenance and repair of Case wheel loaders models 621F and 721F with Tier 4B engines. The manual covers the engine, transmission, four-wheel drive system, front and rear axle systems, brakes, hydraulic systems, frames, steering, wheels, cab climate control, electrical systems, front loader and bucket, platform, cab, and decals. Safety precautions are provided, and only authorized personnel should perform repairs.
New holland w130 c tier 4b (final) wheel loader service repair manualoekdmjkemme
The document provides specifications and removal instructions for engines in New Holland W130C and W170C wheel loaders. It lists operating RPM ranges and temperature specifications. The removal instructions include parking the machine, engaging the articulation lock, discharging brake accumulators, and releasing hydraulic pressure before removing the engine.
New holland speedrower 200 tier 3 self propelled windrower service repair man...ufjjsjekdkemme
This document is a service manual for the Speedrower 200 and 240 self-propelled windrowers. It contains instructions for servicing various engine, drivetrain, hydraulic, electrical, and other systems on the machines. The manual includes sections covering the engine, front and rear axles, hydrostatic drive, brakes, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, and electrical systems. It provides detailed procedures for maintenance, repair, and replacement of components.
New holland speedrower 200 tier 3 self propelled windrower service repair man...ufjjskekemem
This document is a service manual for the Speedrower 200 and 240 self-propelled windrowers. It contains instructions for servicing various engine, drivetrain, hydraulic, electrical, and other systems on the machines. The manual includes sections covering the engine, front and rear axles, hydrostatic drive, brakes, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, and electrical systems. It provides detailed procedures for maintenance, repair, and replacement of components.
New holland w170 c tier 4b wheel loader service repair manualujdjjjkskmme
This service manual provides maintenance and repair instructions for the W170C Wheel Loader. It contains 19 chapters covering the engine, transmission, axles, brakes, hydraulics, frames, steering, wheels, cab climate control, and electrical systems. Safety must be the top priority when servicing equipment, and only authorized personnel should perform repairs. Personal protective equipment should be worn, and all safety messages and instructions must be followed carefully.
New holland w170 c tier 4b wheel loader service repair manualfujsjefjksekfsmem
The document provides a service manual for removing the engine from a W170C wheel loader. It outlines 8 steps for draining fluids and disconnecting panels to access the engine, including draining coolant from the radiator and oil from the sump, then removing side panels and an upper panel to expose the engine. Proper safety procedures are emphasized, such as releasing pressure from hydraulic systems before disconnection.
New holland w170 c tier 4b wheel loader service repair manualfksjksmmde
This service manual provides maintenance and repair instructions for the W170C Wheel Loader. It contains 19 chapters covering the engine, transmission, axles, brakes, hydraulics, frames, steering, wheels, cab climate control, and electrical systems. Safety must be the top priority when servicing equipment, and only authorized personnel should perform repairs. Personal protective equipment should be worn, and all safety messages and instructions must be followed carefully.
New holland w170 c tier 4b wheel loader service repair manualfisejfjsekfksem
This service manual provides maintenance and repair instructions for the W170C Wheel Loader. It contains 19 chapters covering the engine, transmission, axles, brakes, hydraulics, frames, steering, wheels, cab climate control, and electrical systems. Safety must be the top priority when servicing equipment, and only authorized personnel should perform repairs. Personal protective equipment should be worn, and all safety messages and instructions must be followed carefully.
CASE 721F Tier 4B (final) Wheel Loader Service Repair Manual.pdffujskekmdmd
This service manual provides instructions for maintenance and repair of Case wheel loaders models 621F and 721F with Tier 4B engines. The manual covers the engine, transmission, four-wheel drive system, front and rear axle systems, brakes, hydraulic systems, frames, steering, wheels, cab climate control, electrical systems, front loader and bucket, platform, cab, and decals. Safety precautions are provided, and only authorized personnel should perform repairs.
Case 721 f tier 4b (final) wheel loader service repair manualfujsjefjkskefksem
This service manual provides instructions for maintenance and repair of Case wheel loaders models 621F and 721F with Tier 4B engines. The manual covers the engine, transmission, four-wheel drive system, front and rear axle systems, brakes, hydraulic systems, frames, steering, wheels, cab climate control, electrical systems, front loader and bucket, platform, cab, and decals. Safety precautions are provided, and only authorized personnel should perform repairs.
Case 721 f tier 4b (final) wheel loader service repair manualfjsekksmemm
This document provides service information for Case 621F and 721F wheel loaders, including specifications, removal procedures, and repair instructions for various engine and machine systems. It contains sections on the engine, transmission, four-wheel drive system, front and rear axles, brakes, hydraulics, frames, steering, wheels, cab climate control, electrical systems, front loader, bucket, cab, and safety procedures.
Case 621 f tier 4b (final) wheel loader service repair manualfujsjefkskekem
This service manual provides instructions for maintenance and repair of Case 621F and 721F wheel loaders with Tier 4B engines. The manual covers the engine, transmission, four-wheel drive system, front and rear axle systems, brakes, hydraulic systems, frames, steering, wheels, cab climate control, electrical systems, front loader and bucket, platform, cab, and decals. Safety precautions are provided, and only authorized personnel should perform repairs.
Case 621 f tier 4b (final) wheel loader service repair manualfjskkksmemm
This service manual provides instructions for maintenance and repair of Case wheel loaders models 621F and 721F with Tier 4B engines. The manual covers the engine, transmission, four-wheel drive system, front and rear axle systems, brakes, hydraulic systems, frames, steering, wheels, cab climate control, electrical systems, front loader and bucket, platform, cab, and decals. Safety precautions are provided, and only authorized personnel should perform repairs.
Case 621 f tier 4b (final) wheel loader service repair manualfujsjfjksekem
This document provides service information for Case 621F and 721F wheel loaders, including specifications, removal procedures, and repair instructions for various engine and machine systems. It contains sections on the engine, transmission, four-wheel drive system, front and rear axles, brakes, hydraulics, frames, steering, wheels, cab climate control, electrical systems, front loader, bucket, cab, and safety procedures.
Case 721 f tier 4b (final) wheel loader service repair manualudfjjjdkksmmd
This service manual provides instructions for maintenance and repair of Case wheel loaders models 621F and 721F with Tier 4B engines. The manual covers the engine, transmission, four-wheel drive system, front and rear axle systems, brakes, hydraulic systems, frames, steering, wheels, cab climate control, electrical systems, front loader and bucket, platform, cab, and decals. Safety precautions are provided, and only authorized personnel should perform repairs.
Case 721 f tier 4b (final) wheel loader service repair manualfusjfskeekemm
This service manual provides instructions for maintenance and repair of Case wheel loaders models 621F and 721F with Tier 4B engines. The manual covers the engine, transmission, four-wheel drive system, front and rear axle systems, brakes, hydraulic systems, frames, steering, wheels, cab climate control, electrical systems, front loader and bucket, platform, cab, and decals. Safety precautions are provided, and only authorized personnel should perform repairs.
New holland w170 c tier 4b (final) wheel loader service repair manualfusjejfskekemm
This service manual provides information for servicing the W130C/W170C wheel loader. The manual covers the engine, transmission, four-wheel drive system, front and rear axle systems, brakes, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, electrical systems, front loader and bucket, platform, cab, bodywork, and decals. Safety precautions are provided, noting hazards that could cause death, serious injury, or property damage. Only authorized personnel should perform repairs or maintenance.
New holland w130 c tier 4b (final) wheel loader service repair manualfujsjefjkskekmem
This service manual provides information for servicing the W130C/W170C wheel loader. The manual covers the engine, transmission, four-wheel drive system, front and rear axle systems, brakes, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, electrical systems, front loader and bucket, platform, cab, bodywork, and decals. Safety precautions are provided, noting hazards that could cause death, serious injury, or machine/property damage. Only authorized personnel should perform repairs after carefully reviewing safety instructions.
New holland w170 c tier 4b (final) wheel loader service repair manualfjsekkdmme
This service manual provides information for servicing the W130C/W170C wheel loader. The manual covers the engine, transmission, four-wheel drive system, front and rear axle systems, brakes, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, electrical systems, front loader and bucket, platform, cab, bodywork, and decals. Safety precautions are provided, noting hazards that could cause death, serious injury, or machine/property damage. Only authorized personnel should perform repairs after carefully reviewing safety instructions.
CASE 821F Tier 4B (final) Wheel Loader Service Repair Manual.pdfjnjn9464773
This document is a service manual for Case wheel loaders models 821F and 921F with Tier 4B (final) engines. It contains sections covering the engine, transmission, four-wheel drive system, front and rear axle systems, brakes and controls, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, electrical systems, front loader and bucket, and platform, cab, bodywork, and decals. Safety information is provided at the beginning regarding personal safety, machine safety, and the meaning of signal words like DANGER, WARNING, and CAUTION used throughout the manual.
CASE 821F Tier 4B (final) Wheel Loader Service Repair Manual.pdff7usejkdkdmdmw2
This document is a service manual for Case 821F and 921F wheel loaders. It provides specifications and maintenance instructions for the engine, transmission, drivetrain, brakes, hydraulics, frames, steering, wheels, climate control, electrical systems, front loader, cab, and other components. The document contains section numbers and titles to help locate specific topics.
CASE 921F Tier 4B (final) Wheel Loader Service Repair Manual.pdffujsekdkddm3e
This document is a service manual for Case wheel loaders models 821F and 921F with Tier 4B (final) engines. It contains sections covering the engine, transmission, four-wheel drive system, front and rear axle systems, brakes and controls, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, electrical systems, front loader and bucket, and platform, cab, bodywork, and decals. Safety information is provided at the beginning regarding personal safety, machine safety, and the meaning of signal words like DANGER, WARNING, and CAUTION used throughout the manual.
CASE 921F Tier 4B (final) Wheel Loader Service Repair Manual.pdffujekmd8dikd
This document is a service manual for Case 821F and 921F wheel loaders with Tier 4B engines. It provides specifications and maintenance instructions for the engine, transmission, drivetrain, brakes, hydraulics, frames, steering, wheels, cab climate control, electrical systems, front loader, bucket, cab, and decals. The document contains section numbers and titles to help locate specific topics.
CASE 821F Tier 4B (final) Wheel Loader Service Repair Manual.pdffujsekdkddm3e
This document is a service manual for Case 821F and 921F wheel loaders with Tier 4B engines. It provides specifications and maintenance instructions for the engine, transmission, drivetrain, brakes, hydraulics, frames, steering, wheels, cab climate control, electrical systems, front loader, bucket, cab, and decals. The document contains section numbers and titles to help locate specific topics.
CASE 821F Tier 4B (final) Wheel Loader Service Repair Manual.pdffujekmd8dikd
This document is a service manual for Case 821F and 921F wheel loaders. It provides specifications and maintenance instructions for the engine, transmission, drivetrain, brakes, hydraulics, frames, steering, wheels, climate control, electrical systems, front loader, cab, and other components. The document contains section numbers and titles to help locate specific topics.
Hyster e019 (h13.00 xm europe) forklift service repair manualfusjfjsekemwer
This document provides instructions for repairing the frame, counterweight, fenders, hood, hydraulic and fuel tanks, radiator/cooling section, operator compartment, and cab of certain Caterpillar lift trucks. It describes removing and installing the counterweight, which requires a crane due to its heavy weight. Procedures are provided for removing and installing fenders, the hood and air cleaner assembly, and the hydraulic tank. The document emphasizes safety precautions when working on or near heavy components, and when welding or using chemicals during the repair process.
Hyster d005 (h100 e americas) forklift service repair manualfusjfjsekemwer
1) The document provides information on servicing gear pumps used in hydraulic systems. It describes the components and operation of single-stage and tandem gear pumps.
2) The repair process begins with removing the pump, disassembling it, cleaning and inspecting parts. Worn seals are a common cause of failure. Replacement seals are recommended even for parts in good condition.
3) Reassembly involves lubricating parts and installing them back into the pump housings. Proper cleaning and care is important to prevent dirt from damaging parts or entering the hydraulic system.
More Related Content
Similar to Case 721 f xr wheel loader service repair manual
New holland w170 c tier 4b wheel loader service repair manualfujsjefjksekfsmem
The document provides a service manual for removing the engine from a W170C wheel loader. It outlines 8 steps for draining fluids and disconnecting panels to access the engine, including draining coolant from the radiator and oil from the sump, then removing side panels and an upper panel to expose the engine. Proper safety procedures are emphasized, such as releasing pressure from hydraulic systems before disconnection.
New holland w170 c tier 4b wheel loader service repair manualfksjksmmde
This service manual provides maintenance and repair instructions for the W170C Wheel Loader. It contains 19 chapters covering the engine, transmission, axles, brakes, hydraulics, frames, steering, wheels, cab climate control, and electrical systems. Safety must be the top priority when servicing equipment, and only authorized personnel should perform repairs. Personal protective equipment should be worn, and all safety messages and instructions must be followed carefully.
New holland w170 c tier 4b wheel loader service repair manualfisejfjsekfksem
This service manual provides maintenance and repair instructions for the W170C Wheel Loader. It contains 19 chapters covering the engine, transmission, axles, brakes, hydraulics, frames, steering, wheels, cab climate control, and electrical systems. Safety must be the top priority when servicing equipment, and only authorized personnel should perform repairs. Personal protective equipment should be worn, and all safety messages and instructions must be followed carefully.
CASE 721F Tier 4B (final) Wheel Loader Service Repair Manual.pdffujskekmdmd
This service manual provides instructions for maintenance and repair of Case wheel loaders models 621F and 721F with Tier 4B engines. The manual covers the engine, transmission, four-wheel drive system, front and rear axle systems, brakes, hydraulic systems, frames, steering, wheels, cab climate control, electrical systems, front loader and bucket, platform, cab, and decals. Safety precautions are provided, and only authorized personnel should perform repairs.
Case 721 f tier 4b (final) wheel loader service repair manualfujsjefjkskefksem
This service manual provides instructions for maintenance and repair of Case wheel loaders models 621F and 721F with Tier 4B engines. The manual covers the engine, transmission, four-wheel drive system, front and rear axle systems, brakes, hydraulic systems, frames, steering, wheels, cab climate control, electrical systems, front loader and bucket, platform, cab, and decals. Safety precautions are provided, and only authorized personnel should perform repairs.
Case 721 f tier 4b (final) wheel loader service repair manualfjsekksmemm
This document provides service information for Case 621F and 721F wheel loaders, including specifications, removal procedures, and repair instructions for various engine and machine systems. It contains sections on the engine, transmission, four-wheel drive system, front and rear axles, brakes, hydraulics, frames, steering, wheels, cab climate control, electrical systems, front loader, bucket, cab, and safety procedures.
Case 621 f tier 4b (final) wheel loader service repair manualfujsjefkskekem
This service manual provides instructions for maintenance and repair of Case 621F and 721F wheel loaders with Tier 4B engines. The manual covers the engine, transmission, four-wheel drive system, front and rear axle systems, brakes, hydraulic systems, frames, steering, wheels, cab climate control, electrical systems, front loader and bucket, platform, cab, and decals. Safety precautions are provided, and only authorized personnel should perform repairs.
Case 621 f tier 4b (final) wheel loader service repair manualfjskkksmemm
This service manual provides instructions for maintenance and repair of Case wheel loaders models 621F and 721F with Tier 4B engines. The manual covers the engine, transmission, four-wheel drive system, front and rear axle systems, brakes, hydraulic systems, frames, steering, wheels, cab climate control, electrical systems, front loader and bucket, platform, cab, and decals. Safety precautions are provided, and only authorized personnel should perform repairs.
Case 621 f tier 4b (final) wheel loader service repair manualfujsjfjksekem
This document provides service information for Case 621F and 721F wheel loaders, including specifications, removal procedures, and repair instructions for various engine and machine systems. It contains sections on the engine, transmission, four-wheel drive system, front and rear axles, brakes, hydraulics, frames, steering, wheels, cab climate control, electrical systems, front loader, bucket, cab, and safety procedures.
Case 721 f tier 4b (final) wheel loader service repair manualudfjjjdkksmmd
This service manual provides instructions for maintenance and repair of Case wheel loaders models 621F and 721F with Tier 4B engines. The manual covers the engine, transmission, four-wheel drive system, front and rear axle systems, brakes, hydraulic systems, frames, steering, wheels, cab climate control, electrical systems, front loader and bucket, platform, cab, and decals. Safety precautions are provided, and only authorized personnel should perform repairs.
Case 721 f tier 4b (final) wheel loader service repair manualfusjfskeekemm
This service manual provides instructions for maintenance and repair of Case wheel loaders models 621F and 721F with Tier 4B engines. The manual covers the engine, transmission, four-wheel drive system, front and rear axle systems, brakes, hydraulic systems, frames, steering, wheels, cab climate control, electrical systems, front loader and bucket, platform, cab, and decals. Safety precautions are provided, and only authorized personnel should perform repairs.
New holland w170 c tier 4b (final) wheel loader service repair manualfusjejfskekemm
This service manual provides information for servicing the W130C/W170C wheel loader. The manual covers the engine, transmission, four-wheel drive system, front and rear axle systems, brakes, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, electrical systems, front loader and bucket, platform, cab, bodywork, and decals. Safety precautions are provided, noting hazards that could cause death, serious injury, or property damage. Only authorized personnel should perform repairs or maintenance.
New holland w130 c tier 4b (final) wheel loader service repair manualfujsjefjkskekmem
This service manual provides information for servicing the W130C/W170C wheel loader. The manual covers the engine, transmission, four-wheel drive system, front and rear axle systems, brakes, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, electrical systems, front loader and bucket, platform, cab, bodywork, and decals. Safety precautions are provided, noting hazards that could cause death, serious injury, or machine/property damage. Only authorized personnel should perform repairs after carefully reviewing safety instructions.
New holland w170 c tier 4b (final) wheel loader service repair manualfjsekkdmme
This service manual provides information for servicing the W130C/W170C wheel loader. The manual covers the engine, transmission, four-wheel drive system, front and rear axle systems, brakes, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, electrical systems, front loader and bucket, platform, cab, bodywork, and decals. Safety precautions are provided, noting hazards that could cause death, serious injury, or machine/property damage. Only authorized personnel should perform repairs after carefully reviewing safety instructions.
CASE 821F Tier 4B (final) Wheel Loader Service Repair Manual.pdfjnjn9464773
This document is a service manual for Case wheel loaders models 821F and 921F with Tier 4B (final) engines. It contains sections covering the engine, transmission, four-wheel drive system, front and rear axle systems, brakes and controls, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, electrical systems, front loader and bucket, and platform, cab, bodywork, and decals. Safety information is provided at the beginning regarding personal safety, machine safety, and the meaning of signal words like DANGER, WARNING, and CAUTION used throughout the manual.
CASE 821F Tier 4B (final) Wheel Loader Service Repair Manual.pdff7usejkdkdmdmw2
This document is a service manual for Case 821F and 921F wheel loaders. It provides specifications and maintenance instructions for the engine, transmission, drivetrain, brakes, hydraulics, frames, steering, wheels, climate control, electrical systems, front loader, cab, and other components. The document contains section numbers and titles to help locate specific topics.
CASE 921F Tier 4B (final) Wheel Loader Service Repair Manual.pdffujsekdkddm3e
This document is a service manual for Case wheel loaders models 821F and 921F with Tier 4B (final) engines. It contains sections covering the engine, transmission, four-wheel drive system, front and rear axle systems, brakes and controls, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, electrical systems, front loader and bucket, and platform, cab, bodywork, and decals. Safety information is provided at the beginning regarding personal safety, machine safety, and the meaning of signal words like DANGER, WARNING, and CAUTION used throughout the manual.
CASE 921F Tier 4B (final) Wheel Loader Service Repair Manual.pdffujekmd8dikd
This document is a service manual for Case 821F and 921F wheel loaders with Tier 4B engines. It provides specifications and maintenance instructions for the engine, transmission, drivetrain, brakes, hydraulics, frames, steering, wheels, cab climate control, electrical systems, front loader, bucket, cab, and decals. The document contains section numbers and titles to help locate specific topics.
CASE 821F Tier 4B (final) Wheel Loader Service Repair Manual.pdffujsekdkddm3e
This document is a service manual for Case 821F and 921F wheel loaders with Tier 4B engines. It provides specifications and maintenance instructions for the engine, transmission, drivetrain, brakes, hydraulics, frames, steering, wheels, cab climate control, electrical systems, front loader, bucket, cab, and decals. The document contains section numbers and titles to help locate specific topics.
CASE 821F Tier 4B (final) Wheel Loader Service Repair Manual.pdffujekmd8dikd
This document is a service manual for Case 821F and 921F wheel loaders. It provides specifications and maintenance instructions for the engine, transmission, drivetrain, brakes, hydraulics, frames, steering, wheels, climate control, electrical systems, front loader, cab, and other components. The document contains section numbers and titles to help locate specific topics.
Similar to Case 721 f xr wheel loader service repair manual (20)
Hyster e019 (h13.00 xm europe) forklift service repair manualfusjfjsekemwer
This document provides instructions for repairing the frame, counterweight, fenders, hood, hydraulic and fuel tanks, radiator/cooling section, operator compartment, and cab of certain Caterpillar lift trucks. It describes removing and installing the counterweight, which requires a crane due to its heavy weight. Procedures are provided for removing and installing fenders, the hood and air cleaner assembly, and the hydraulic tank. The document emphasizes safety precautions when working on or near heavy components, and when welding or using chemicals during the repair process.
Hyster d005 (h100 e americas) forklift service repair manualfusjfjsekemwer
1) The document provides information on servicing gear pumps used in hydraulic systems. It describes the components and operation of single-stage and tandem gear pumps.
2) The repair process begins with removing the pump, disassembling it, cleaning and inspecting parts. Worn seals are a common cause of failure. Replacement seals are recommended even for parts in good condition.
3) Reassembly involves lubricating parts and installing them back into the pump housings. Proper cleaning and care is important to prevent dirt from damaging parts or entering the hydraulic system.
Hyster c215 (w45 z) forklift service repair manualfusjfjsekemwer
The document provides instructions for repairing frames on forklifts. It describes the main components that attach to the frame, including the lifting mechanism, electrical system, hydraulic pump, and master drive unit. Procedures are outlined for separating a fork frame or drive unit frame if damaged while the rest of the truck is still usable. The steps include removing pins and carefully separating the frames. Reassembly involves replacing the pins in reverse order. Safety warnings are also provided.
Caterpillar cat 322 c l 322cl excavator (prefix bkm) service repair manual (b...fusjfjsekemwer
This document provides instructions for removing and installing fuel system components on a Caterpillar 322C excavator with a 3126 engine. It describes removing and installing the fuel priming pump, primary fuel filter, fuel transfer pump, and fuel shutoff solenoid. Detailed steps and illustrations are provided for each procedure, and tools required are listed. Technicians are advised to keep components clean and contain fluids to prevent contamination.
Caterpillar cat 320 c s excavator (prefix bea) service repair manual (bea0000...fusjfjsekemwer
The document provides instructions for removing and disassembling the stick drift reduction valve on a 320C excavator. It lists the required tools and outlines 7 steps to disassemble the valve, including removing bolts, fittings, seals, springs, and spools. Safety warnings are provided regarding relieving hydraulic pressure before disassembly and preventing contamination of hydraulic components.
Caterpillar cat 320 c s excavator (prefix bbl) service repair manual (bbl0000...fusjfjsekemwer
This document provides instructions for assembling the F4 auxiliary control valve on 320C excavator models. It lists the required tools and notes on cleanliness. The steps include installing O-rings, springs, and other components in the proper order and orientation. Finally, it states to install the F4 auxiliary control valve by referring to another document providing full installation instructions.
Caterpillar cat 320 c ln excavator (prefix bbl) service repair manual (bbl000...fusjfjsekemwer
This document provides installation instructions for auxiliary control valves on a 320C excavator. It describes:
1) Installing the F1 and F4 auxiliary control valves together using existing mount bolts and connecting hoses and electrical connections.
2) Connecting pilot lines, electrical connectors, and tubes to complete the installation of the control valves.
3) Installing panels, filters, and covers to finish the assembly.
This document provides instructions for removing and installing inlet and exhaust valve springs on Caterpillar 3064 and 3066 engines. The procedure involves using several specialized tools to compress the valve springs so that the valve keepers can be removed and installed without removing the cylinder head. Air pressure is applied to the cylinder to hold the valves in position while the springs are worked on individually. Proper compression of the springs is important to avoid damaging the valve stems.
This document provides instructions for disassembling and assembling the piston pump of a 216B3 Skid Steer Loader. It lists 71 steps to fully disassemble the pump by removing components like fittings, springs, seals, bearings, pins and plates. The assembly section lists 8 steps such as installing liners, seals, bearings and shafts. Tools required are also listed.
The document provides instructions for removing and installing an exhaust manifold on a 216B3 Skid Steer Loader with a C2.2 engine. The removal procedure involves loosening fasteners, removing the exhaust manifold and gasket. The installation procedure involves cleaning surfaces, installing a new gasket, aligning and installing the exhaust manifold, and tightening fasteners to the specified torque. Safety notices are provided regarding keeping parts clean and preventing damage.
This document provides instructions for disassembling and assembling the piston motor of a 216B3 Skid Steer Loader. The disassembly process involves removing 25 parts from the motor in a specific order, taking care when removing springs. The assembly process reverses the disassembly steps, heating some parts before installing and using tools to install retaining rings and shafts.
This document provides assembly instructions for a piston pump in a 216B3 skid steer loader. It outlines 78 steps to assemble components like bearings, seals, pins, springs and plates. Special tools are required and parts must be installed in the correct orientation. Measurements taken during disassembly must be matched. The process involves pressing, torquing and installing retaining rings and seals. Finally, the assembled piston pump is installed back into the skid steer loader.
This document provides removal and installation instructions for a turbocharger and exhaust manifold on a 216B2 Skid Steer Loader with a 3024C engine. The turbocharger removal procedure involves removing hoses, bolts, tubes and gaskets. The exhaust manifold removal involves loosening nuts and bolts, removing the manifold and gasket, and possibly studs. Cleaning and inspection steps are outlined. Reinstallation involves cleaning, installing new gaskets, bolts and nuts in the specified order and torque. Valve spring removal and installation procedures are also summarized requiring the use of special tools.
Caterpillar cat 216 b skid steer loader (prefix rll) service repair manual (r...fusjfjsekemwer
This document provides instructions for installing the engine oil pump on a 216B skid steer loader. It describes:
1) Using an alignment tool to install the idler hub into the cylinder block.
2) Lubricating and installing various pump components like the inner rotor and idler gear.
3) Installing retaining rings and checking end play with a feeler gauge.
4) Reinstalling components like the oil strainer if removed previously.
This document provides instructions for removing and installing various components on a Caterpillar 216 Skid Steer Loader, including:
- Removing and installing the gas spring that supports the cab. Precautions are listed to safely release the spring force.
- Removing the fuel transfer pump, including disconnecting fuel lines and removing mounting bolts.
- Removing the fuel injection lines by disconnecting unions at the nozzles and pump, removing banjo bolts, washers and nuts. Identification marks should be made for reinstallation.
Case ih stx 430 tractor service repair manualfusjfjsekemwer
This document provides a master table of contents for a service manual covering STX and Steiger series tractors. It lists the tractor models covered, notes that engine repair information is in separate manuals, and outlines the sections and subsections contained in the service manual books, including specifications, lubrication/maintenance, engine removal/installation, and air induction system for certain tractor models.
Case ih puma 240 cvt tier 4 b (final) tractor service repair manualfusjfjsekemwer
This service manual provides information for servicing the Case IH PUMA® 185 CVT, PUMA® 185, PUMA® 200 CVT, PUMA® 200, PUMA® 220 CVT, PUMA® 220, and PUMA® 240 CVT tractors. The manual covers systems of the tractor such as the engine, transmission, axles, hydraulics, pneumatics, electrical systems, and more. Each system section includes detailed component information, diagrams, and specifications to aid technicians in maintenance and repair of the tractors.
Case 1021 g stage iv wheel loader service repair manualfusjfjsekemwer
This service manual document provides information on servicing wheel loaders, including engine service. It includes specifications for 1121G and 1021G wheel loader models with Tier 4B engines. The document covers removing and servicing the engine and crankcase, as well as fuel, air intake, cooling, lubrication and emissions systems. Safety procedures and instructions are provided throughout.
Case 921 g wheel loader xr eh, new cab tier4b wheel loader service repair manualfusjfjsekemwer
This document is a service manual for CNH Industrial wheel loaders models 821G and 921G. It contains sections covering the engine, transmission, four-wheel drive system, front and rear axle systems, brakes and controls, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, and electrical systems. Safety precautions are provided to prevent injury when servicing the equipment.
New holland w170 d zbar tier4b wheel loader service repair manualfusjfjsekemwer
This document is a service manual for wheel loaders models W130D and W170D. It contains information on engine systems, transmission, four-wheel drive system, front and rear axle systems, brakes and controls, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, and electrical systems. The manual provides maintenance and repair instructions for technicians and is organized by system with section numbers for easy reference.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
7. INTRODUCTION
Safety rules
Personal safety
This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all
safety messages that follow this symbol to avoid possible death or injury.
Throughout this manual you will find the signal words DANGER, WARNING, and CAUTION followed by special in-
structions. These precautions are intended for the personal safety of you and those working with you.
Read and understand all the safety messages in this manual before you operate or service the machine.
DANGER indicates a hazardous situation that, if not avoided, will result in death or serious injury.
WARNING indicates a hazardous situation that, if not avoided, could result in death or serious injury.
CAUTION indicates a hazardous situation that, if not avoided, could result in minor or moderate injury.
FAILURE TO FOLLOW DANGER, WARNING, AND CAUTION MESSAGES COULD RESULT
IN DEATH OR SERIOUS INJURY.
Machine safety
NOTICE: Notice indicates a situation that, if not avoided, could result in machine or property damage.
Throughout this manual you will find the signal word Notice followed by special instructions to prevent machine or
property damage. The word Notice is used to address practices not related to personal safety.
Information
NOTE: Note indicates additional information that clarifies steps, procedures, or other information in this manual.
Throughout this manual you will find the word Note followed by additional information about a step, procedure, or
other information in the manual. The word Note is not intended to address personal safety or property damage.
47881872_EN 24/06/2015
3
8. INTRODUCTION
Personal safety
Carefully read this Manual before proceeding with main-
tenance, repairs, refuelling or other machine operations.
Repairs have to be carried out only by authorized and in-
structed staff; specific precautions have to be taken when
grinding, welding or when using mallets or heavy ham-
mers.
Non-authorized persons are not allowed to repair or carry
out maintenance on this machine. Do not carry out any
work on the equipment without prior authorization.
Ask your employer about the safety instructions in force
and safety equipment.
Nobody should be allowed in the cab during machine
maintenance unless he is a qualified operator helping
with the maintenance work.
If it is necessary to move the equipment to carry out re-
pairs or maintenance, do not lift or lower the equipment
from any other position than the operator’s seat.
TULI12WEX2004AA 1
Never carry out any operation on the machine when the
engine is running, except when specifically indicated.
Stop the engine and ensure that all pressure is relieved
from hydraulic circuits before removing caps, covers,
valves, etc.
All repair and maintenance operations should be carried
out with the greatest care and attention.
Service stairs and platforms used in a workshop or in the
field should be built in compliance with the safety rules in
force.
Any functional disorders, especially those affecting the
safety of the machine, should therefore be rectified im-
mediately.
DANGER
Unexpected movement!
Make sure parking brake is applied. Secure
machine with wheel chocks.
Failure to comply will result in death or serious
injury.
D0013A
TULI12WEX2005AA 2
Before performing any work on the machine, attach a
maintenance in progress tag. This tag can be applied on
the left-hand control lever, safety lever or cab door.
47881872_EN 24/06/2015
4
9. INTRODUCTION
Emergency
Be prepared for emergencies. Always keep a fire extin-
guisher and first aid kit readily available. Ensure that the
fire extinguisher is serviced in accordance with the man-
ufacturer’s instructions.
SMIL12WEX0174AA 3
Equipment
Wear close fitting clothing and safety equipment appropri-
ate for the job:
• Safety helmet
• Safety shoes
• Heavy gloves
• Reflective clothing
• Wet weather clothing
If working conditions require, the following personal safety
equipment should be on hand:
• Respirators (or dust proof masks)
• Ear plugs or acoustic ears protections
• Goggles with lateral shield or masks for eye protection
Do not wear rings, wristwatches, jewelry, unbuttoned or
flapping clothing such as ties, torn clothes, scarves, open
jackets or shirts with open zips which could get caught into
moving parts.
TULI12WEX2008AA 4
Engine - Radiator
Never leave the engine running in enclosed spaces with-
out proper ventilation which is able to evacuate toxic ex-
haust gases- Keep the exhaust manifold and tube free
from combustible materials.
Do not refuel with the engine running, especially if hot, as
this increases fire hazard in case of fuel spillage.
Never attempt to check or adjust the belts when the en-
gine is running.
Never lubricate the machine with the engine running.
TULI12WEX2009AA 5
47881872_EN 24/06/2015
5
10. INTRODUCTION
Product identification
LEIL15WHL0056FA 1
1. Bucket 6. Engine and Selective Catalyst Reduction (SCR) system
2. Loader lift arms (Z-bar version) 7. Counterweight
3. Driving lights 8. Electric master switch and battery jump post (optional)
4. Roll Over Protection System (ROPS) cab 9. Steps
5. Precleaner
47881872_EN 24/06/2015
23
11. INTRODUCTION
LEIL13WHL0214FA 2
1. Diesel Exhaust Fluid (DEF) fill tank 5. Bucket cylinder
2. Sliding access panel 6. Front frame
3. Fuse access door 7. Rear frame
4. Cab air filter 8. Steps
47881872_EN 24/06/2015
24
13. Engine - Engine and crankcase
Engine - General specification
Engine with 4 Speed Transmission
A. Low idle 870 RPM to 930 RPM
Alternate low idle 670 RPM to 730 RPM
Alternate Accelerated Idle 1270 RPM to 1330 RPM
B. Maximum No Load RPM 2100 RPM to 2185 RPM
C. Converter Stall 1893 RPM to 2093 RPM
D. Hydraulic Stall 1923 RPM to 2123 RPM
E. Converter & Hydraulic Stall 1500 RPM to 1700 RPM
Temperature of the torque converter oil 82 - 104 °C (180 - 219 °F)
Temperature of the hydraulic oil 54 - 57 °C (129 - 135 °F)
Engine with 5 Speed Transmission
A. Low idle 870 RPM to 930 RPM
Alternate low idle 670 RPM to 730 RPM
Alternate Accelerated Idle 1270 RPM to 1330 RPM
B. Maximum No Load RPM 2100 RPM to 2185 RPM
C. Converter Stall 1748 RPM to 1948 RPM
D. Hydraulic Stall 1987 RPM to 2187 RPM
E. Converter & Hydraulic Stall 1413 RPM to 1613 RPM
Temperature of the torque converter oil 82 - 104 °C (180 - 219 °F)
Temperature of the hydraulic oil 54 - 57 °C (129 - 135 °F)
NOTE: Hydraulic Stall and Converter & Hydraulic Stall RPM values are read while the lift arms are rising with the
bucket held rolled back and the engine at Wide Open Throttle (WOT) in max power mode with transmission in manual
mode and in 3rd gear.
Engine - General specification – Engine Service Manual
The table below lists the part numbers of the Engine FPT F4HFE613T Service Manual. The part numbers of the
European languages related to this manual are reported. See the Engine Service Manual for more details about the
engine overhaul.
Language Engine Service Manual P/N
English 47606122
French 47606125
German 47606126
Italian 47606127
Spanish 47606130
47881872_EN 24/06/2015
10.1 [10.001] / 3
14. Engine - Engine and crankcase
Engine - Remove
NOTE: emissions sensors mounted in the exhaust stream are sensitive to extreme vibrations. Use of tools that gen-
erate extreme vibrations, such as impact wrenches and hammers, will result in damage to emission sensors. Avoid
using these tools during any service procedure in close proximity of emission sensors. If the use of these tools cannot
be avoided, remove the sensors using extreme caution prior to performing any service procedure.
1. Park machine on a level surface and lower the bucket
to the ground. Put articulation lock in LOCKED position
and stop the engine.
RCPH10WHL063BAL 1
2. Actuate the brake pedal several times to discharge
brake accumulators.
RCPH10WHL435AAH 2
3. Put key switch in ON position. Pilot control switch must
be in the ON position and then move loader control
lever(s) back and forth at least 30 times to release any
pressure from hydraulic circuit. Put key switch in OFF
position.
RCPH10WHL119BAL 3
47881872_EN 24/06/2015
10.1 [10.001] / 4
15. Engine - Engine and crankcase
4. Raise grill located above the cooler box just behind the
cab. Then slowly loosen the hydraulic reservoir filler
cap to release pressure in the reservoir.
RCPH10WHL099BAL 4
5. Locate the master and hood raise switch by the battery
box. Then raise the hood and put the master discon-
nect switch in the OFF position.
RCPH10WHL106AAH 5
6. Unhook the rubber T-handle (1) and raise the upper
panel (2). Make sure that the security levers are
blocked.
LEIL13WHL0137AB 6
7. Raise both side panels (1). Then remove the thumb
screws (2) and inner fender panels (3).
NOTE: right–hand side of the machine is shown. The op-
eration is similar for the left–hand side.
LEIL13WHL0612AB 7
47881872_EN 24/06/2015
10.1 [10.001] / 5
16. Engine - Engine and crankcase
8. Place a suitable container below radiator drain, remove
radiator cap and coolant drain plug (arrow) to drain en-
gine coolant. Then reinstall drain plug and radiator cap
after coolant has drained.
NOTE: see machine specifications for cooling system vol-
ume.
RCPH10WHL054BAL 8
9. Place a suitable container below engine oil drain. Re-
move drain plug and drain oil into container. Then re-
install drain plug.
NOTE: see machine specifications for engine oil sump vol-
ume.
RCPH10WHL054BAL 9
10. After oil drains, disconnect drain hose from frame by
removing jam nut (1). Then pull hose from frame in
preparation for engine removal. (2)
RAPH12WEL0598AA 10
11. Double up a nylon lifting strap and slide through the
exhaust stack (1) on the hood.
LEIL13WHL0552AB 11
47881872_EN 24/06/2015
10.1 [10.001] / 6
17. Engine - Engine and crankcase
12. Place a bar or pipe through the strap loop inside the
hood and attach the strap to a suitable lifting device.
Then raise the hood with the strap to release tension
on the lifting motor.
RAPH12WEL0600AA 12
13. Tag and disconnect the rearview camera wire harness
(if machine is equipped with a rearview camera).
RAPH12WEL0601AA 13
14. Cut wire ties and remove rearview camera wire har-
ness from hood. Then place it off to the side in a safe
location. (If machine is equipped with a rearview cam-
era.)
LEIL13WHL0140AB 14
15. Remove hood wire harness clamp (1) from the cooler
housing.
Then tag and remove the hood ground wire (2) from
cooler housing.
LEIL13WHL0149AB 15
47881872_EN 24/06/2015
10.1 [10.001] / 7
18. Engine - Engine and crankcase
16. Tag and disconnect hood wiring harness connector (1)
from rear chassis wiring harness connector.
Remove hood wire harness clamp (2) from the fan
shroud.
LEIL13WHL0150AB 16
17. Have another person to balance the hood and
LOOSEN the hood hinge mounting bolts (arrows)
from the cooler frame.
NOTE: Do not remove the hood hinge mounting bolts at
this time.
LEIL13WHL0142AB 17
18. Remove the pin from the bottom of the lifting motor
cylinder where it attaches to the loader frame.
RAPH12WEL0606AA 18
19. Put the master disconnect switch in the ON position.
Then, retract the lifting motor cylinder (2), replace pin
and disconnect wiring harness (1).
RAPH12WEL0062AA 19
47881872_EN 24/06/2015
10.1 [10.001] / 8
19. Engine - Engine and crankcase
20. Put master disconnect switch (1) in OFF position. Re-
move the battery cover and disconnect ground lead
from the batteries (2). You may replace battery cover
if desired to give you a place to stand.
RAPH12WEL0608AA 20
21. Have another person to balance the hood and re-
move the hood hinge mounting bolts (arrows) from the
cooler frame.
LEIL13WHL0142AB 21
22. Carefully raise and remove hood from loader. Lower
hood onto suitable platform and disconnect lifting
equipment from exhaust stack (1) .
NOTE: radiator overflow hose may interfere with left hand
hood hinge movement and hood removal.
LEIL13WHL0552AB 22
23. Tag and disconnect engine wiring harness connector
from air filter restriction switch.
RAPH12WEL0610AA 23
47881872_EN 24/06/2015
10.1 [10.001] / 9
20. Engine - Engine and crankcase
24. Tag and disconnect engine wiring harness connector
from air inlet humidity sensor (1).
LEIL13WHL0143AB 24
25. Loosen clamp (1) on the crankcase ventilation hose
(2) and disconnect hose.
LEIL13WHL0144AB 25
26. Loosen clamps on turbocharger and air filter hous-
ing. Then remove the intake air hose (1) . Cover tur-
bocharger inlet to prevent debris entry.
LEIL13WHL0145AB 26
27. Loosen the clamp from the elbow connected to the
turbocharger.
LEIL14WHL0203AB 27
47881872_EN 24/06/2015
10.1 [10.001] / 10
21. Engine - Engine and crankcase
28. Loosen the clamp on the hose at the after cooler inlet
and remove the tube.
LEIL13WHL0147AB 28
29. Loosen clamp on the air inlet hose at the air filter hous-
ing.
LEIL13WHL0148AB 29
30. Loosen the clamp (1) on the air inlet hose (2) at the
exhaust support bracket.
Remove the air inlet hose (2).
LEIL13WHL0151AB 30
31. Remove the securing bolts (1) with the related wash-
ers and nuts. Remove the bracket (2) with the air filter
(3) as an assembly.
LEIL15WHL0037AB 31
47881872_EN 24/06/2015
10.1 [10.001] / 11
22. Engine - Engine and crankcase
32. Remove the four mounting bolts from the belt cover.
Then remove the cover.
NOTE: after removing the belt cover, remove the cover
mounting bracket from the left rear side of machine frame.
LEIL13WHL0154AB 32
33. Remove the drive belt from the engine.
LEIL13WHL0155AB 33
34. If machine is equipped with the air conditioning sys-
tem, identify, tag, and disconnect the engine wiring
harness connectors from air compressor clutch con-
nector (1) and high pressure switch (2). Then remove
the three mounting bolts (3) for the compressor and
carefully set it on the left battery cover.
LEIL13WHL0156AB 34
35. Tag and disconnect the wiring from the alternator.
RAPH12WEL0622AA 35
47881872_EN 24/06/2015
10.1 [10.001] / 12
23. Engine - Engine and crankcase
36. Remove the return line of the SCR coolant.
RAPH12WEL0623AA 36
37. Tag and remove the wires from the starter solenoid
(1), the ground cable (2), and ground strap (3) from
the starter.
NOTE: Move the starter cables away from the engine.
RAPH12WEL0624AA 37
38. Remove the bolts securing the wiring harness clamps
to the engine.
RAPH12WEL0625AA 38
47881872_EN 24/06/2015
10.1 [10.001] / 13
24. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
25. Engine - Engine and crankcase
39. Remove the ground wires from the engine.
NOTE: Move the wiring harness away from the engine.
RAPH12WEL0625AA 39
40. If the machine is so equipped, unplug the engine block
heater and set it aside.
LEIL15WHL0016AB 40
41. Loosen the clamp (see the arrow in figure) and dis-
connect the pipe.
LEIL15WHL0015AB 41
42. Loosen the clamps and remove the lower coolant
hose from the engine.
RAPH12WEL0629AA 42
47881872_EN 24/06/2015
10.1 [10.001] / 14
26. Engine - Engine and crankcase
43. Remove the radiator hose from the engine.
LEIL13WHL0159AB 43
44. Remove the return radiator hose (1) and the engine
coolant vent hose from the top of the radiator.
LEIL13WHL0141AB 44
45. Remove the overflow tank of the engine coolant.
RAPH12WEL0633AA 45
46. Remove the bracket of the overflow tank.
RAPH12WEL0634AA 46
47881872_EN 24/06/2015
10.1 [10.001] / 15
27. Engine - Engine and crankcase
47. Remove the cooling fan screen.
LEIL13WHL0160AB 47
48. Loosen the clamp (1) on the intake manifold for the
output hose of the after cooler.
Loosen the clamp (2) from the body of the
DEF/ADBLUE® tank vent filter.
LEIL13WHL0613AA 48
49. Loosen the clamp on the after cooler, and remove the
output hose of the after cooler from the machine.
LEIL13WHL0162AB 49
50. Tag and disconnect the fuel filter heater wire (1) and
the water sensor (2). Then drain fuel filter and discon-
nect the inlet (3) and outlet (4) fuel lines from the fuel
filter head. Plug the lines and cap the fittings.
Remove the ground wire and the attachment bolt (5)
of the fuel filter head.
LEIL13WHL0163AB 50
47881872_EN 24/06/2015
10.1 [10.001] / 16
28. Engine - Engine and crankcase
51. Tag and remove the grid heater cable (1).
NOTE: hold the rear nut with a second wrench to prevent
grid heater damage.
LEIL13WHL0164AB 51
52. Remove wire harness support clamp.
RAPH12WEL0064AA 52
53. Remove the P-clamp and cut the cable ties by the sup-
ply module. Disconnect the end of the jumper harness
(near the supply module) from the DOC support.
LEIL15WHL0034AB 53
54. Loosen the clamp (1) on the Diesel Oxidation Catalyst
(DOC).
LEIL13WHL0166AB 54
47881872_EN 24/06/2015
10.1 [10.001] / 17
29. Engine - Engine and crankcase
55. Tag and disconnect the connector (1).
LEIL13WHL0167AB 55
56. Tag and disconnect the wire harness of the tempera-
ture sensor (1) for the Selective Catalytic Reduction
muffler (SCR) and cut the connector wire clamps.
Loosen the screws and remove the bar (2).
LEIL14WHL0407AB 56
57. Attach a suitable lifting straps to the Selective Cat-
alytic Reduction muffler (SCR) support structure. Re-
move the bolts securing the support structure at the
front (1) and rear (2) part of the structure.
Use a suitable lifting device and carefully lift the
support structure of the Selective Catalytic Reduction
muffler (SCR) from the machine.
NOTE: pay particular attention to the connection between
the SCR muffler and the Diesel Oxidation Catalyst (DOC).
LEIL13WHL0169AB 57
58. Tag and disconnect the wire harness from the buzzer.
Remove the bolts (1) securing the front support struc-
ture of the SCR muffler and remove it.
LEIL13WHL0174AB 58
47881872_EN 24/06/2015
10.1 [10.001] / 18