The document provides steps for checking lighting equipment, including verifying that 10 CCT fresnel lights are present along with barn doors and gel frames installed correctly in each light. It also involves checking that 10 plugs are plugged into the dimmer pack to match the 10 lights. Further steps include inspecting individual lights that fail to turn on by checking internal components and replacing bulbs carefully. The final step is to check that the grand master switch is turned on, as the lights will not work if this main control is off.

1. Like the firststepof the stepbystepguide,here Iam checkingthat
there are 10 CCT fresnels.Ialsocheckedfromvisuals thatthere barn
doorsand gel framesinthe lightand that theyare the right way
round,if there wasn’tor theywere the wrongwayround,I wouldget
the laddersandinserta gel frame or barn doors.
Here is the dimmerpack.I am firstcheckingthatthe dimmerpackis
switchedandthenIcheckedwhetherthere were 10plugspluggedintothe
dimmer. Thiswouldconfirmthatall of the 10 CCT fresnelsare pluggedin.If
there are not 10 plugspluggedin,Iwouldfindthe otherplug,matchitup to
a lightand thenplugitin.
Here I am checkinginside the light.Forexample,if there wasalightthat
didnot turn oneventhoughitwas pluggedintothe dimmer,Iwould
take the lightdownand checkthe insides.If the insidesare okay,thenI
wouldcheckthe bulb.Also,be careful withthe bulbusingapiece of
fabricwhenholdingitasskincan take the life awayfromthe bulb.
Thisis the grand master.If youfindthat no lightsare turningon
eventhough youhave followedthe stepbystepguide,youmayfind
that the grand mastersare notturnedon.If the grand mastersare
not turnedupthenthe lightswill notturnon.