Carl_Smith_Resume_3
•Download as DOCX, PDF•
1 like•113 views
Carl Smith has over 30 years of experience in automotive interior design, program management, and plant management. He has worked for companies like Faurecia, S Group Automotive, RLE Engineering, Intier Automotive, and more. His specialties include product development, engineering management, supplier integration, injection molding, and new product introduction. He has a passport that expires in April 2016 and degrees in mechanical engineering and drafting.
Report
Share
Report
Share
Recommended
Overall Bodyinwhite Design Albert Pushparaj
The document discusses several vehicle body design projects completed by Albert Henry Pushparaj with over seven years of experience as a Body in White Design Engineer. The projects include:
1. Designing body panels and providing reinforcements for parts like the tailgate using NX12 design software.
2. Designing the front roof rail, rear roof, center roof, and bow roof rail which required calculations for snow load and heat distortion conditions.
3. Designing areas of the fender like the drip area, sill mount, bumper mount, and A-pillar mount.
4. Designing the wheel arc region of the fender.
5. Designing the hood.
Wesolowski Zack 01 2015 1
Zack Wesolowski is a mechanical engineer with 4 years of experience in 3D design, mechanical drawings, and large equipment design. He has worked as an intern at Wendt Corporation and Globe Metallurgical where he was involved in 3D design, updating drawings, and ensuring safety regulations were followed. Currently, he is working towards an Associate's degree in Mechanical Technology and Design from Niagara County Community College.
Project Management Presentation Slides
TK Builders proposes developing a 1,181 square meter commercial property with a supermarket, retail shops, and parking facilities. The development would include a three-story building with an elevator design concept. It is located in a strategic area with an increasing population that lacks parking. The estimated construction cost is RM 13 million and total development cost is RM 15.9 million. Over a 20-year period, the projected total income is RM 51 million with an estimated net profit of RM 15.9 million and average annual cash flow of RM 1.6 million. The payback period is estimated at 10 years.
C.V.UP DATE
The document is a curriculum vitae for Moataza Abdel Rahman Metawea. It lists his personal details and qualifications, including a civil engineering degree from Cairo University. It then outlines his employment history from 2008 to the present as a Quantity Surveying Manager for ORASCOM Construction Industries, and previous roles as a Quantity Surveying Manager and Assistant Quantity Surveying Manager for several other construction companies from 1999 to 2008. It provides details of his responsibilities in each role, such as managing recovery, liaising with consultants, and conducting audits.
m.anwar c.v ( E )
Mohamed Mahmoud Anwar is an Egyptian civil engineer currently working as a quality control engineer in Dubai, with over 15 years of experience in quality control and project supervision roles in Egypt and the UAE. He holds a B.Sc. in Civil Engineering from Cairo University and has managed quality control on a variety of construction projects ranging from 13-133 million AED in value. Anwar is seeking new opportunities as a consulting or quality control engineer, and has extensive experience supervising construction works, finishes, and maintenance across different sectors.
SRIHARI-RESUME
This curriculum vitae provides information on Banothu Srihari's education and experience in planning and billing for civil engineering projects. He has a Bachelor's degree in civil engineering and over 2 years of experience. His responsibilities have included studying drawings, preparing bills of quantities and client billing for various building projects. He has successfully billed an invoice of 300 crores for one project and is currently doing client billing for another project.
LYCr_CV_3
Lesly Yaret Cruz Temblador is a 26-year-old aeronautical engineer from Mexico with experience working as a design, lamps, fascia, and efficiency engineer at Ford Motor Company. She has a bachelor's degree in aeronautical engineering from IPN with a GPA of 8.19. Some of her key projects at Ford include improving fog lamp quality, conducting thermal analysis on fog lamp design, analyzing gaps and improvements in fascia assembly, and evaluating a tool to reduce development time by 30%.
Tufano mechanical engineering final
This document provides an overview of mechanical engineering, including the necessary training, advancement possibilities, job responsibilities, and profiles of two mechanical engineers. A bachelor's degree in mechanical engineering is required to enter the field. Mechanical engineers design and develop machines and equipment across various industries. Advancement occurs from entry-level to senior engineer to supervisor to manager. Example companies discussed are Michelin Tire and Fluor, which employ over 100,000 people globally in engineering services.
Recommended
Overall Bodyinwhite Design Albert Pushparaj
The document discusses several vehicle body design projects completed by Albert Henry Pushparaj with over seven years of experience as a Body in White Design Engineer. The projects include:
1. Designing body panels and providing reinforcements for parts like the tailgate using NX12 design software.
2. Designing the front roof rail, rear roof, center roof, and bow roof rail which required calculations for snow load and heat distortion conditions.
3. Designing areas of the fender like the drip area, sill mount, bumper mount, and A-pillar mount.
4. Designing the wheel arc region of the fender.
5. Designing the hood.
Wesolowski Zack 01 2015 1
Zack Wesolowski is a mechanical engineer with 4 years of experience in 3D design, mechanical drawings, and large equipment design. He has worked as an intern at Wendt Corporation and Globe Metallurgical where he was involved in 3D design, updating drawings, and ensuring safety regulations were followed. Currently, he is working towards an Associate's degree in Mechanical Technology and Design from Niagara County Community College.
Project Management Presentation Slides
TK Builders proposes developing a 1,181 square meter commercial property with a supermarket, retail shops, and parking facilities. The development would include a three-story building with an elevator design concept. It is located in a strategic area with an increasing population that lacks parking. The estimated construction cost is RM 13 million and total development cost is RM 15.9 million. Over a 20-year period, the projected total income is RM 51 million with an estimated net profit of RM 15.9 million and average annual cash flow of RM 1.6 million. The payback period is estimated at 10 years.
C.V.UP DATE
The document is a curriculum vitae for Moataza Abdel Rahman Metawea. It lists his personal details and qualifications, including a civil engineering degree from Cairo University. It then outlines his employment history from 2008 to the present as a Quantity Surveying Manager for ORASCOM Construction Industries, and previous roles as a Quantity Surveying Manager and Assistant Quantity Surveying Manager for several other construction companies from 1999 to 2008. It provides details of his responsibilities in each role, such as managing recovery, liaising with consultants, and conducting audits.
m.anwar c.v ( E )
Mohamed Mahmoud Anwar is an Egyptian civil engineer currently working as a quality control engineer in Dubai, with over 15 years of experience in quality control and project supervision roles in Egypt and the UAE. He holds a B.Sc. in Civil Engineering from Cairo University and has managed quality control on a variety of construction projects ranging from 13-133 million AED in value. Anwar is seeking new opportunities as a consulting or quality control engineer, and has extensive experience supervising construction works, finishes, and maintenance across different sectors.
SRIHARI-RESUME
This curriculum vitae provides information on Banothu Srihari's education and experience in planning and billing for civil engineering projects. He has a Bachelor's degree in civil engineering and over 2 years of experience. His responsibilities have included studying drawings, preparing bills of quantities and client billing for various building projects. He has successfully billed an invoice of 300 crores for one project and is currently doing client billing for another project.
LYCr_CV_3
Lesly Yaret Cruz Temblador is a 26-year-old aeronautical engineer from Mexico with experience working as a design, lamps, fascia, and efficiency engineer at Ford Motor Company. She has a bachelor's degree in aeronautical engineering from IPN with a GPA of 8.19. Some of her key projects at Ford include improving fog lamp quality, conducting thermal analysis on fog lamp design, analyzing gaps and improvements in fascia assembly, and evaluating a tool to reduce development time by 30%.
Tufano mechanical engineering final
This document provides an overview of mechanical engineering, including the necessary training, advancement possibilities, job responsibilities, and profiles of two mechanical engineers. A bachelor's degree in mechanical engineering is required to enter the field. Mechanical engineers design and develop machines and equipment across various industries. Advancement occurs from entry-level to senior engineer to supervisor to manager. Example companies discussed are Michelin Tire and Fluor, which employ over 100,000 people globally in engineering services.
Tufano mechanical engineering final
This document provides an overview of mechanical engineering as a career path. It discusses the necessary training (a bachelor's degree), advancement possibilities (from entry level to manager), and job responsibilities (designing and developing machines). It profiles two mechanical engineers - one with a master's degree from Ford who has been involved in over 20 projects, and one from Michelin who has designed equipment used in 5 countries. It also briefly describes two large companies, Michelin and Fluor, that employ mechanical engineers.
Wankhede nomination 31-08-2013
The document provides details about the Wankhede Stadium project in Mumbai, including key statistics, photographs, project status, timeline, costs, challenges, innovations, and impacts. The 35,000 sqm stadium was completed in January 2011 at an estimated cost of 250 crores to seat 32,000 people. It faced challenges like tight space and a short timeline but overcame them through innovations like a 25m cantilevered roof and stringent quality control processes. The stadium has added to India's self-reliance in cricket and helped host international tournaments.
Mukusi Guesthouse
The document contains a drawing list for a proposed 18 room lodge project in Kazangula for client Adam Young. It includes 7 drawings - a site plan, main building plan and section, main building elevations, double units plans/section/elevations, location plan showing the site in relation to nearby towns, and a main building fire plan. The drawings are at various scales from 1:7500 to 1:200 and formatted on A1, A3, and L size paper.
Mzaghloul CV Rev 1
Mohamed Radwan has over 25 years of experience in project management and operations management for power plants in Egypt. He is currently seeking a general manager or country manager position. His experience includes serving as deputy general manager for several power companies and managing procurement, budgeting, and financial reporting.
Al Qasr Mall presentation
This document provides an overview and status update of the Al Qasr Mall project in Saudi Arabia. It summarizes that the project is 99.6% complete, with construction of core packages finished and critical milestones like energizing transformer rooms achieved. It also lists potential additional works and notes 44.18% of the mall's leasable area is fitted out and ready for tenants. Key pre-opening tasks are still needed before the mall can open.
CE 162 Design Presentation
This document provides a summary of the planning and design for a three story luxury car dealership and showroom project. It includes sections on the project delivery model, location and site details, structural design elements, cost estimates, schedules, and a feasibility analysis. The project is located in Santa Clara, CA on a parcel that meets the city's zoning requirements. Designs were completed for the building footprint, parking, landscaping and gross square footage. Cost estimates were provided for each phase with contingencies. The project is projected to finish on budget and on the scheduled completion date of September 2017. Authorization to begin construction is requested.
Teague brian resume9 20-13century. seatdocx
Brian Teague has over 30 years of experience in engineering design, quality, and project management roles in the automotive industry. He has worked at General Motors, various engineering design firms, and a vehicle parts supplier. His areas of expertise include plastic injection molding, virtual reality modeling, supplier quality, manufacturing support, and design for Six Sigma.
MISETICH-RESUME-071015
This document contains the resume of Ronald J. Misetich, outlining his professional experience in automotive design engineering. It details his roles at various companies from 2010 to present, including General Motors and 3M Corporation, where he designed exterior trim components, sunroof drain hoses, and lighting elements. It also outlines his experience from 2000 to 2009 at Toyoda Gosei designing safety systems and from 1995 to 2000 at TRW designing airbag and steering wheel systems. Misetich's education includes training in CAD software, GD&T, design processes, and he holds a patent for an airbag design.
Resent Resume
Brian Robert Teague has over 30 years of experience in engineering design, quality engineering, and project management. He has worked for major automotive companies like General Motors and suppliers. Some of his responsibilities have included redesigning vehicle components, conducting simulations to test for issues, analyzing warranty data to reduce costs, and managing production processes. He is skilled in many engineering tools and methodologies like Design for Six Sigma, GD&T, FMEA, and DOE.
Teague brian resume10 30-14. steeringx.docx2
Brian Robert Teague has over 30 years of experience in engineering design, quality engineering, and project management. He has worked for major automotive companies like General Motors and suppliers. Some of his responsibilities have included redesigning vehicle components, conducting simulations to evaluate design issues, reducing warranty costs, and managing quality systems. He also has an MBA and bachelor's degree in industrial management.
Brians Teagues experience
Brian Robert Teague has over 30 years of experience in engineering design, quality engineering, and project management. He has worked for major automotive companies like General Motors and suppliers. Some of his responsibilities have included redesigning vehicle components, conducting simulations to test for issues, analyzing warranty data to improve quality, and managing production processes. He has extensive experience using CAD/CAE software and problem-solving methodologies in the automotive industry.
SUDHEESH_CV
Sudheesh Kumar has over 6 years of experience in mechanical design and CAD modeling using Catia V5, UG NX, and Solid Edge. He currently works as a Specialist CAD Designer at Roechling Automotive in Germany where he is responsible for feasibility studies, concept generation, and final releases for tooling. Previously he has worked on projects designing interior components for GM and BMW.
Resume Sudhir Pore -2016
This document provides a summary of Sudhir Pore's experience. He has 10 years of experience in project execution, team management, product design and development. Currently working as a Resident Engineer at Plastal AB Sweden, his expertise includes automotive exterior and interior trims. He has handled various projects involving design and development of automotive parts at companies like Plastal, Magna, Rolls Royce and Tata AutoComp. He has technical skills in CAD tools like CATIA and NX along with PLM tools like Teamcenter.
B. Reynolds 4.13.2015 LI
Brian Reynolds has over 20 years of experience in leadership, business, project management, design, planning and product engineering in the automotive industry. He has worked for several major automotive suppliers in positions including lead program manager, business manager, director of design engineering, senior engineer, and product engineer. Reynolds has extensive domestic and international experience, and holds several patents related to automotive components. He is seeking a new position that values integrity, professional challenge, and work-life balance.
manjit_ resume
Manjit Kumar Chaubey has over 12 years of experience in mechanical design and product development. He has expertise in designing transmission components for tractors and automobiles using CAD software like NX, ProEngineer, and CATIA. Some of the projects he has worked on include the design of gearboxes, housings, differentials, and other transmission parts for companies like Escorts, Satyam Venture Engineering, Endurance Technologies, and Radix Dies & Moulds. He is proficient in technical skills like modeling, drafting, analysis, and prototype development.
Ashley M Edgar Resume - June 2016
Ashley Edgar has over 15 years of experience in the automotive industry, primarily at Fiat Chrysler Automobiles, where she currently holds the role of Advanced Vehicle Development Vehicle Program Manager. She has extensive experience managing cross-functional teams and vehicle development projects. Prior to her current role, she held positions in aerodynamics and thermal systems engineering, product development quality, reliability testing, and vehicle customer quality. Edgar has a B.S. in Mechanical Engineering from Michigan State University and certifications in design software and quality methods.
CV - FF - ingl-2014
The document provides information about Fábio Cruz Figueiredo including his contact details, background, qualifications, and extensive experience in product engineering and management roles over 23 years with companies like GM, Ford, and Embraer. He has international experience in countries like China, Germany, USA, and India. His areas of specialization include plastic and metal components for automotive, aeronautical, and other industries.
David Molloy - CV1
David Molloy has over 30 years of experience in proposal engineering, estimating, and tool design. He currently works as a proposal engineer at Comau, where he has held several roles including proposal lead, ITAR security officer, and proposal manager. Prior to his current role, Molloy worked as a designer, layout engineer, and detailer at several engineering firms supporting the automotive industry. He has a background in tool design, CAD operation, and process development. Molloy continues his education at Lawrence Technological University pursuing a BSME degree.
Brian teague resume10.29.14
Brian Teague is a design engineer with over 30 years of experience in automotive design, manufacturing, quality, and project management. He has worked for General Motors for over 20 years, holding roles in virtual reality engineering, quality engineering, and senior design. He currently works as a product development engineer for Navistar through an engineering staffing company.
Brian teague resume10.29.14
Brian Teague has over 30 years of experience in design engineering, quality engineering, and project management at General Motors. He has expertise in areas such as supplier quality, manufacturing support, plastic forming, warranty analysis, and design for six sigma. Teague holds an MBA and bachelor's degree and has received two quality awards from GM.
Brian teague resume10.29.14
Brian Teague has over 30 years of experience in design engineering, quality engineering, and project management at General Motors. He has expertise in areas such as supplier quality, manufacturing support, product design, problem solving methodologies, simulation, and more. He holds an MBA and bachelor's degree and has received quality awards from GM.
Dan mikolaizik resume_may2018
Daniel J. Mikolaizik is an electrical systems engineer with experience leading teams in product development projects for automotive camera modules and instrument clusters. He has over 30 years of experience in engineering roles at Delphi, Daewoo Infotainment Systems, and currently at Magna Electronics. Mikolaizik has led numerous product launches and coordinated efforts between internal and external teams to realize deliverables on schedule. He is proficient in requirements analysis, product integration, and independent testing and verification.
More Related Content
What's hot
Tufano mechanical engineering final
This document provides an overview of mechanical engineering as a career path. It discusses the necessary training (a bachelor's degree), advancement possibilities (from entry level to manager), and job responsibilities (designing and developing machines). It profiles two mechanical engineers - one with a master's degree from Ford who has been involved in over 20 projects, and one from Michelin who has designed equipment used in 5 countries. It also briefly describes two large companies, Michelin and Fluor, that employ mechanical engineers.
Wankhede nomination 31-08-2013
The document provides details about the Wankhede Stadium project in Mumbai, including key statistics, photographs, project status, timeline, costs, challenges, innovations, and impacts. The 35,000 sqm stadium was completed in January 2011 at an estimated cost of 250 crores to seat 32,000 people. It faced challenges like tight space and a short timeline but overcame them through innovations like a 25m cantilevered roof and stringent quality control processes. The stadium has added to India's self-reliance in cricket and helped host international tournaments.
Mukusi Guesthouse
The document contains a drawing list for a proposed 18 room lodge project in Kazangula for client Adam Young. It includes 7 drawings - a site plan, main building plan and section, main building elevations, double units plans/section/elevations, location plan showing the site in relation to nearby towns, and a main building fire plan. The drawings are at various scales from 1:7500 to 1:200 and formatted on A1, A3, and L size paper.
Mzaghloul CV Rev 1
Mohamed Radwan has over 25 years of experience in project management and operations management for power plants in Egypt. He is currently seeking a general manager or country manager position. His experience includes serving as deputy general manager for several power companies and managing procurement, budgeting, and financial reporting.
Al Qasr Mall presentation
This document provides an overview and status update of the Al Qasr Mall project in Saudi Arabia. It summarizes that the project is 99.6% complete, with construction of core packages finished and critical milestones like energizing transformer rooms achieved. It also lists potential additional works and notes 44.18% of the mall's leasable area is fitted out and ready for tenants. Key pre-opening tasks are still needed before the mall can open.
CE 162 Design Presentation
This document provides a summary of the planning and design for a three story luxury car dealership and showroom project. It includes sections on the project delivery model, location and site details, structural design elements, cost estimates, schedules, and a feasibility analysis. The project is located in Santa Clara, CA on a parcel that meets the city's zoning requirements. Designs were completed for the building footprint, parking, landscaping and gross square footage. Cost estimates were provided for each phase with contingencies. The project is projected to finish on budget and on the scheduled completion date of September 2017. Authorization to begin construction is requested.
What's hot (6)
Similar to Carl_Smith_Resume_3
Teague brian resume9 20-13century. seatdocx
Brian Teague has over 30 years of experience in engineering design, quality, and project management roles in the automotive industry. He has worked at General Motors, various engineering design firms, and a vehicle parts supplier. His areas of expertise include plastic injection molding, virtual reality modeling, supplier quality, manufacturing support, and design for Six Sigma.
MISETICH-RESUME-071015
This document contains the resume of Ronald J. Misetich, outlining his professional experience in automotive design engineering. It details his roles at various companies from 2010 to present, including General Motors and 3M Corporation, where he designed exterior trim components, sunroof drain hoses, and lighting elements. It also outlines his experience from 2000 to 2009 at Toyoda Gosei designing safety systems and from 1995 to 2000 at TRW designing airbag and steering wheel systems. Misetich's education includes training in CAD software, GD&T, design processes, and he holds a patent for an airbag design.
Resent Resume
Brian Robert Teague has over 30 years of experience in engineering design, quality engineering, and project management. He has worked for major automotive companies like General Motors and suppliers. Some of his responsibilities have included redesigning vehicle components, conducting simulations to test for issues, analyzing warranty data to reduce costs, and managing production processes. He is skilled in many engineering tools and methodologies like Design for Six Sigma, GD&T, FMEA, and DOE.
Teague brian resume10 30-14. steeringx.docx2
Brian Robert Teague has over 30 years of experience in engineering design, quality engineering, and project management. He has worked for major automotive companies like General Motors and suppliers. Some of his responsibilities have included redesigning vehicle components, conducting simulations to evaluate design issues, reducing warranty costs, and managing quality systems. He also has an MBA and bachelor's degree in industrial management.
Brians Teagues experience
Brian Robert Teague has over 30 years of experience in engineering design, quality engineering, and project management. He has worked for major automotive companies like General Motors and suppliers. Some of his responsibilities have included redesigning vehicle components, conducting simulations to test for issues, analyzing warranty data to improve quality, and managing production processes. He has extensive experience using CAD/CAE software and problem-solving methodologies in the automotive industry.
SUDHEESH_CV
Sudheesh Kumar has over 6 years of experience in mechanical design and CAD modeling using Catia V5, UG NX, and Solid Edge. He currently works as a Specialist CAD Designer at Roechling Automotive in Germany where he is responsible for feasibility studies, concept generation, and final releases for tooling. Previously he has worked on projects designing interior components for GM and BMW.
Resume Sudhir Pore -2016
This document provides a summary of Sudhir Pore's experience. He has 10 years of experience in project execution, team management, product design and development. Currently working as a Resident Engineer at Plastal AB Sweden, his expertise includes automotive exterior and interior trims. He has handled various projects involving design and development of automotive parts at companies like Plastal, Magna, Rolls Royce and Tata AutoComp. He has technical skills in CAD tools like CATIA and NX along with PLM tools like Teamcenter.
B. Reynolds 4.13.2015 LI
Brian Reynolds has over 20 years of experience in leadership, business, project management, design, planning and product engineering in the automotive industry. He has worked for several major automotive suppliers in positions including lead program manager, business manager, director of design engineering, senior engineer, and product engineer. Reynolds has extensive domestic and international experience, and holds several patents related to automotive components. He is seeking a new position that values integrity, professional challenge, and work-life balance.
manjit_ resume
Manjit Kumar Chaubey has over 12 years of experience in mechanical design and product development. He has expertise in designing transmission components for tractors and automobiles using CAD software like NX, ProEngineer, and CATIA. Some of the projects he has worked on include the design of gearboxes, housings, differentials, and other transmission parts for companies like Escorts, Satyam Venture Engineering, Endurance Technologies, and Radix Dies & Moulds. He is proficient in technical skills like modeling, drafting, analysis, and prototype development.
Ashley M Edgar Resume - June 2016
Ashley Edgar has over 15 years of experience in the automotive industry, primarily at Fiat Chrysler Automobiles, where she currently holds the role of Advanced Vehicle Development Vehicle Program Manager. She has extensive experience managing cross-functional teams and vehicle development projects. Prior to her current role, she held positions in aerodynamics and thermal systems engineering, product development quality, reliability testing, and vehicle customer quality. Edgar has a B.S. in Mechanical Engineering from Michigan State University and certifications in design software and quality methods.
CV - FF - ingl-2014
The document provides information about Fábio Cruz Figueiredo including his contact details, background, qualifications, and extensive experience in product engineering and management roles over 23 years with companies like GM, Ford, and Embraer. He has international experience in countries like China, Germany, USA, and India. His areas of specialization include plastic and metal components for automotive, aeronautical, and other industries.
David Molloy - CV1
David Molloy has over 30 years of experience in proposal engineering, estimating, and tool design. He currently works as a proposal engineer at Comau, where he has held several roles including proposal lead, ITAR security officer, and proposal manager. Prior to his current role, Molloy worked as a designer, layout engineer, and detailer at several engineering firms supporting the automotive industry. He has a background in tool design, CAD operation, and process development. Molloy continues his education at Lawrence Technological University pursuing a BSME degree.
Brian teague resume10.29.14
Brian Teague is a design engineer with over 30 years of experience in automotive design, manufacturing, quality, and project management. He has worked for General Motors for over 20 years, holding roles in virtual reality engineering, quality engineering, and senior design. He currently works as a product development engineer for Navistar through an engineering staffing company.
Brian teague resume10.29.14
Brian Teague has over 30 years of experience in design engineering, quality engineering, and project management at General Motors. He has expertise in areas such as supplier quality, manufacturing support, plastic forming, warranty analysis, and design for six sigma. Teague holds an MBA and bachelor's degree and has received two quality awards from GM.
Brian teague resume10.29.14
Brian Teague has over 30 years of experience in design engineering, quality engineering, and project management at General Motors. He has expertise in areas such as supplier quality, manufacturing support, product design, problem solving methodologies, simulation, and more. He holds an MBA and bachelor's degree and has received quality awards from GM.
Dan mikolaizik resume_may2018
Daniel J. Mikolaizik is an electrical systems engineer with experience leading teams in product development projects for automotive camera modules and instrument clusters. He has over 30 years of experience in engineering roles at Delphi, Daewoo Infotainment Systems, and currently at Magna Electronics. Mikolaizik has led numerous product launches and coordinated efforts between internal and external teams to realize deliverables on schedule. He is proficient in requirements analysis, product integration, and independent testing and verification.
Milind_Kalkadkar
Milind Kalkadkar has over 6 years of experience in automotive design working with companies like Asia Motor Works and Tech Mahindra. He has expertise in vehicle chassis design, modeling, drafting, and developing digital mockups. Currently he is a Lead Design Engineer at Tech Mahindra working on commercial vehicle chassis systems and cost reduction projects for clients like Navistar.
Resume dharmendrakumar
Dharmendra Kumar is a project engineer with over 5 years of experience in plastics engineering. He has extensive experience using CATIA V5 for designing plastic components and conducting feasibility studies related to draft analysis, curvature analysis, gap and flush evaluations. Some of the major projects he has worked on involve the rear bumper of a Skoda vehicle, lower grill of a PSA vehicle, and cluster hood and nacelle components of a Tata vehicle. He is proficient in CATIA V5 and has basic knowledge of UG NX and other CAD software.
Rick Hatlen Resume Oct 2016 A
Richard Paul Hatlen is an engineering and business leader with over 25 years of experience in various roles including engineering management, project management, and business management. He has a track record of successfully leading teams to develop new products, improve processes, and exceed customer expectations. Some of his key accomplishments include developing patented designs for agricultural equipment, improving production processes, and utilizing lean tools to reduce costs and increase efficiency. He currently serves as the Director of Engineering for JWM - Modern Equipment Company & The John Wood Corporation.
Matt Cochran Resume (Nov2016_3)
Matt Cochran has over 10 years of experience in manufacturing and design engineering roles within the aerospace industry. He has held positions as a Design for Manufacturing and Assembly Manager, Manufacturing Engineer, Machine Shop Manager and Design Engineer, Lead CNC Programmer, and CNC and Manual Machinist. Matt received a degree in Mechanical Engineering Technology with an emphasis in Manufacturing from California State University Long Beach.
Similar to Carl_Smith_Resume_3 (20)
Carl_Smith_Resume_3
- 1. Carl Smith Home: Summary Plant Management Program Management Engineering Management Knowledge of GM, Ford and Chrysler Business Units. Supplier Integration Injection Molding Compression Molding Vacuum Forming United States Passport: Expiration Date 4/4/16 Highlights Plant Management Projectmanagement Root cause analysis Time management skills Technical plan execution New product introduction (NPI) Advanced in Microsoft Excel, Project, PPT and Word Accomplishments Designed and engineered the first Power Assisted Mag Drill Retrofitted a GasPowered Vehicle to ElectricDrive Designed and engineered the first Marine application HUD Experience Product Development Leader September 2012 Faurecia －Southfield,MI Product Development Leader: Serial Life Ford CBU Interior InstrumentPanels, Door Panelsand Center Console Plant Manager August 2008toSeptember 2012 S Group Automotive － Novi, MI Managed a Production Team of 120 Employees Launched SHea Interiors Business Group Managed NewEquipment Builds and Installation Launched Three Load Floor Program Certification:TS 16949, ISO14001 and Q1 - Cell: Product Engineering 1226 Lori Ln., Fenton MI 48430 - csmith1966@outlook.com810-241-9305 248-762-6772 Proficientin program development of automotive interior design from concept to production release Off Shore Resource Engineering and Design Team Development Injection molding techniques Stamping and mass production processes Design for Manufacturing (DFM) Highly skilled in 3D and 2D CAD C344N, C344 MCA, C520N, C520 MCA, B299 MCA, C346Nand V363
- 2. Program Engineering Manager September 2006 to September 2008 RLE Engineering － Madison Heights, MI Engineering Manager for Chrysler CBU Retrofitted a Cargo Truck for Chrysler's GEM group, using a TATA motorsof India light weight Truck from Gasto Electric Drive Design Leader January 1999 to August 2006 Intier Automotive － Novi, MI Responsibilities: Overseen OffShore Design Operations. GMX295 RHD I.P. Cockpit. GMX320 Leather wrapped I.P. and Door Panels. SGM980 Interior Supplier Integration GMT900 I.P. Cockpit and Center Floor Consoles. GMX320, GMX265, GMX295 Overhead Systems GMX 265 Rear Cargo Storage Unit. Sr. Designer June 1996 to January 1999 New Dimension Inc.－ Troy,MI Responsibilities: Designed Fuel System for the GMT800 Program Sr. Designer April 1991 toJune 1996 ACRO Service Corporation － Novi, MI Responsibilities: GMT400 Instrument Cluster. '93 Buick C Instrument Cluster Head Up Display Unit (HUD) for Sea Ray Boats Designer February 1988 to April 1991 GeminiTechnology Inc. －Burtron, MI Responsibilities: Injection Mold Designer, Designed injection molds for Instrument Clusters and HVAC systems MechanicalDrafter, Jr. Designer April 1986 toFebruary 1988 Engineering Technology LTD － Troy,MI Responsibilities: Assisted lead designersin the design of Instrument Clusters MechanicalDrafter, Detailer/Jr. Designer March 1984toApril 1986 Thomas Design and Engineering －SwartzCreek,MI Responsibilities: Assisted lead designersin the design of Instrument Clusters and Injection Molds
- 3. Education Associate of Applied Science: Mechanical Engineering Mott Community College － Flint, MI,Genesee Credits towardsan Associate’s Degree in Mechanical Engineering Technology High School Diploma:General,1984 Flint Northern High School － Flint, MI, Genesee Mechanical Drafting,1984 Genesee Area Skill Center－ Flint, MI, Genesee Automotive Body Design,1988 H.L. Bosca School of Automotive Body Design － Mt Clemens, MI