C7
•
0 likes•52 views
This certificate certifies that E J Smant, with identification number 840828 5135 080, has fulfilled all the requirements for competency in the Standard Industrial Safety Course: SF2 on July 10, 2006. The certificate is accredited by SEIFSA, the Engineering Training Consultant organization, under their accreditation number 17-5A/00216/04 and is signed by the Centre Operations Manager.
Report
Share
Report
Share
Download to read offline
Recommended
blue line system training
This document certifies that Abdallah Sukhtian has been trained by SCIEX to receive continuing education on installation, repair, maintenance, qualification of 4500/5500/6500Series LC/MS systems. SCIEX confirms Abdallah is eligible for further training and can train customers on operating the instruments. This certification is valid as long as Abdallah remains employed by SCIEX or an authorized dealer.
CSEM cert
Lane C. Cheek has been certified as a Safety Emergency Manager by the Office of Infrastructure Preparedness. The certification is valid unless revoked or suspended and certifies that Lane C. Cheek has met the education, experience, and examination requirements established by the Office of Infrastructure Preparedness to be entitled to all the rights and privileges granted by the certifying body.
6500 +
SCIEX confirms that Abdallah Sukhtian, an engineer, has been trained and is eligible for continuing training on installation, repair, maintenance, qualification, and training customers on the operation of listed instruments. Through employment at SCIEX or an authorized dealer, this engineer has access to the latest product information, service tools, and spare parts. This record is valid as of 12/17/2015 as long as the engineer remains employed by SCIEX or an authorized dealer, and SCIEX can confirm the validity by contacting CustomerCare@absciex.com.
3500
SCIEX confirms that Abdallah Sukhtian has completed 3500 hours of training and is eligible for continuing education on installation, repair, maintenance, qualification, and training customers on SCIEX instruments. As an SCIEX employee, he has access to product information, service tools, and spare parts. This certificate is valid as long as Abdallah Sukhtian remains employed by SCIEX or an authorized dealer, and SCIEX can confirm the certificate's validity by contacting CustomerCare@absciex.com.
STC AS9100C Cert Jun15-09
This certificate confirms that Superior Technical Ceramics Corporation, located in St. Albans, Vermont, has a quality management system certified to be in compliance with AS9100C standards as audited by NSF-ISR. The certificate is valid until May 3, 2016 and covers the manufacturing of custom technical ceramics at Superior's central office campus and two additional locations in St. Albans, Vermont.
Aero Precision signs agreement with WesTest Engineering!!!
Aero Precision Industries LLC has entered into an agreement with WesTest Engineering Corporation to provide sales support for WesTest's 2000/DATS Automatic Test Equipment. The WesTest ATE can test 5 LRUs and over 400 SRUs from 45 LRUs. This will allow Aero Precision to expand its depot level test, repair, and spares support for aircraft avionics systems. WesTest ATE is already used by six F-16 customers including the USAF. The agreement will help more F-16 operators gain independent repair and overhaul capabilities through Aero Precision's maintenance support using the WesTest test stands.
Iosh managing safetly
The IOSH Managing Safely Certification is an Internationally recognized Environmental Health and Safety Professional Certification.
843570439AOPA(3)
This certificate was presented to SGT Kevin Parrish on November 12, 2014 for successfully completing the online IFR Insights: Charts course provided by the Air Safety Institute. The course helped pilots improve their instrument flight rules chart reading skills and was accessed through the Air Safety Institute's website.
Recommended
blue line system training
This document certifies that Abdallah Sukhtian has been trained by SCIEX to receive continuing education on installation, repair, maintenance, qualification of 4500/5500/6500Series LC/MS systems. SCIEX confirms Abdallah is eligible for further training and can train customers on operating the instruments. This certification is valid as long as Abdallah remains employed by SCIEX or an authorized dealer.
CSEM cert
Lane C. Cheek has been certified as a Safety Emergency Manager by the Office of Infrastructure Preparedness. The certification is valid unless revoked or suspended and certifies that Lane C. Cheek has met the education, experience, and examination requirements established by the Office of Infrastructure Preparedness to be entitled to all the rights and privileges granted by the certifying body.
6500 +
SCIEX confirms that Abdallah Sukhtian, an engineer, has been trained and is eligible for continuing training on installation, repair, maintenance, qualification, and training customers on the operation of listed instruments. Through employment at SCIEX or an authorized dealer, this engineer has access to the latest product information, service tools, and spare parts. This record is valid as of 12/17/2015 as long as the engineer remains employed by SCIEX or an authorized dealer, and SCIEX can confirm the validity by contacting CustomerCare@absciex.com.
3500
SCIEX confirms that Abdallah Sukhtian has completed 3500 hours of training and is eligible for continuing education on installation, repair, maintenance, qualification, and training customers on SCIEX instruments. As an SCIEX employee, he has access to product information, service tools, and spare parts. This certificate is valid as long as Abdallah Sukhtian remains employed by SCIEX or an authorized dealer, and SCIEX can confirm the certificate's validity by contacting CustomerCare@absciex.com.
STC AS9100C Cert Jun15-09
This certificate confirms that Superior Technical Ceramics Corporation, located in St. Albans, Vermont, has a quality management system certified to be in compliance with AS9100C standards as audited by NSF-ISR. The certificate is valid until May 3, 2016 and covers the manufacturing of custom technical ceramics at Superior's central office campus and two additional locations in St. Albans, Vermont.
Aero Precision signs agreement with WesTest Engineering!!!
Aero Precision Industries LLC has entered into an agreement with WesTest Engineering Corporation to provide sales support for WesTest's 2000/DATS Automatic Test Equipment. The WesTest ATE can test 5 LRUs and over 400 SRUs from 45 LRUs. This will allow Aero Precision to expand its depot level test, repair, and spares support for aircraft avionics systems. WesTest ATE is already used by six F-16 customers including the USAF. The agreement will help more F-16 operators gain independent repair and overhaul capabilities through Aero Precision's maintenance support using the WesTest test stands.
Iosh managing safetly
The IOSH Managing Safely Certification is an Internationally recognized Environmental Health and Safety Professional Certification.
843570439AOPA(3)
This certificate was presented to SGT Kevin Parrish on November 12, 2014 for successfully completing the online IFR Insights: Charts course provided by the Air Safety Institute. The course helped pilots improve their instrument flight rules chart reading skills and was accessed through the Air Safety Institute's website.
SAIW Welding and Fabrication Inspector Level 2
Maurice Scholtz has been awarded a diploma for SAIW Welding and Fabrication Inspector Level Two by SAIW Certification. He met the education and training requirements for this certification level and passed the required examination administered by the SAIW Certification Governing Board. The diploma recognizes his qualification as a Welding and Fabrication Inspector at Level Two.
dinkar prajapati cv
Dinkar Prajapati is seeking opportunities as an instrument technician with 6 years of experience in instrumentation for petrochemical, fertilizer, and chemical plants. He has worked in Qatar and India, maintaining, calibrating, and troubleshooting various instruments including valves, transmitters, analyzers, and vibration sensors. Prajapati is educated with an instrumentation diploma and ITI certification.
Hire Safety Professional - ASK EHS Safety Personnel Outsourcing Services
Hire Safety Professional - ASK EHS Safety Personnel Outsourcing ServicesASK EHS Engineering & Consultants
Learn More: http://www.ask-ehs.com/ehs-manpower.html
ASK-EHS HEALTH AND SAFETY MANPOWER STAFFING SOLUTIONS.
Employers can contact: +91 922 769 5202 or write us: jobs@ask-ehs.comShanmugam Implant Resumae
Shanmugam Theagarajan is an experienced Implant Equipment Engineer with over 10 years of experience working with various implant toolsets in Singapore and India. He has strong technical skills and problem solving abilities. Currently working as an Implant EE at a semiconductor lab, his responsibilities include routine maintenance, root cause analysis of issues, and planning annual tool maintenance. He is looking to expand his career opportunities to new technical challenges where he can contribute his expertise.
Splunk Certified Knowlege Manager_Imp
This document contains information about an individual named Anushka Jalther who holds the Splunk Certified Knowledge Manager certification. It lists their name, certification, and date along with a version number and license number for the certification.
IASSC LEAN SIX SIGMA YELLOW BELT CERTIFICATE
This certificate recognizes that the individual named has completed the requirements to earn the title of IASSC Lean Six Sigma Yellow Belt. It was issued by International Accreditation for Six Sigma on January 1, 2017 and includes the individual's name, certification number, and date of certification.
Lean Six Sigma Green Belt (CLSSGB)™
This certificate certifies that Ben John Zachariah passed the Lean Six Sigma Green Belt examination according to qualification scheme CLSSGB-Q10-20. The examination was held in Bangalore on June 22, 2020. The certificate is issued by TÜV SÜD South Asia Pvt. Ltd. and bears certificate number IN/3310/25501.
APICS SCOR Professional (SCOR-P)
This document certifies that Alfredo Armijos has earned the designation of SCOR-P (SCOR Professional Endorsement) from APICS (Association for Supply Chain Management) for successfully completing the requirements set by APICS' Certification Committee. The certification is signed by Abe Eshkenazi, APICS Chief Executive Officer, and Steve Georgevitch, 2017 APICS Chair of the Board, and is dated April 19, 2018.
Resume Johnny E Byrd (1)
Johnny Byrd is a rig maintenance supervisor seeking a position to challenge himself and train future generations. He has over 15 years of experience as an electrician, mechanic, and maintenance supervisor on offshore drilling rigs. He is skilled in electrical work, troubleshooting, HVAC, drilling equipment, communications, and dealing with people under stress. He has qualifications and licenses in areas such as bottom bearing operations, marine firefighting, welding, refrigeration, electrical work, and first aid.
Accident Investigation and Root Cause Analysis
This certificate certifies that Basim Safindi completed the course "Accident Investigation and Root Cause Analysis" on July 8, 2015. The certificate is 1 page long and was generated on August 7, 2015 from the Parsons Skillport learning management system.
Resume (Dee) 2016
Dolores "Dee" Gonzales is seeking a position as a safety professional with over 15 years of experience in various safety roles including as a safety permit writer, expediter, trainer, auditor, and advisor. She has an Associate Degree in Occupational Safety and Health Technology from Del Mar College and a Bachelor's Degree in Environmental Health and Safety from Texas A&M CC. Her experience includes working as a safety permit writer at a Tesoro refinery in Alaska, an OSHA safety compliance intern, and as an operations office safety manager. She has numerous safety certifications and has taught a variety of safety training courses.
Pamphlet
Eagle Star Aviation (ESA) was tasked with designing a pylon to allow installation of a Pratt & Whitney PW305A turbofan engine onto a Bombardier CRJ700 aircraft. ESA, composed of 11 engineering students, divided into six departments and received support from industrial partners. The project was completed on schedule and within budget, with static testing validating the finite element analysis of the front engine mount. The systems design complied with certification requirements through various analyses. The manufacturing process was planned to enable delivery of pylons for 60 aircraft and 4 annual retrofits.
VESDA AIR-SAMPLING SMOKE DETECTION SYSTEMS OSID OPEN SMOKE IMAGING DETECTOR
Certificado de Entrenamiento, Aplicación, Diseño, Instalación, Configuración y Mantenimiento de Sistemas de Detección Temprana de Incendios por Aspiración de Humo VESDA by XTRLIS
Aerotek Clinical
Aerotek Scientific is a specialist staffing firm focused on clinical research. They understand the clinical research market and client needs. Their recruiters are educated on industry trends, clinical trials processes, and regulations. Aerotek Scientific recruits candidates for contract, contract-to-hire, and permanent clinical research positions across areas like clinical operations, data management, drug safety and information. Their goal is to provide the perfect candidate fit for each role through customized engagement and a database of over 10 million potential applicants.
Presentationfor manpower requirement at aiims
The document discusses the manpower requirements at AIIMS. It summarizes the current faculty positions, noting 224 vacant positions out of 826 total. It also lists 106 faculty positions approved but pending further approval. For non-faculty posts, it outlines the current positions, vacancies, and status of recruitment for various roles. It concludes mentioning additional non-faculty posts approved or proposed for creation to strengthen departments and programs at AIIMS, totaling over 2,000 positions.
logistics operations manager lean six sigma
Pete Ortega is seeking a warehouse management position that utilizes his 15 years of related experience. He has enclosed his resume and is requesting a personal meeting to further discuss his diverse background in warehouse operations, logistics, import/export, human resources, safety procedures, and other areas. Ortega wishes to contribute his professional skills and leadership abilities, especially in a role with potential for advancement. He hopes his resume and letter provide adequate information to be considered for a position on their professional team.
IPC 620
This document is Akbar Aziz's certificate of completion for the IPC/WHMA-A-620 Requirements and Acceptance for Cable and Wire Harness Assemblies certification course. The certificate designates Akbar Aziz as a Certified IPC Specialist and provides his serial number. It states that he has met all the necessary requirements for the industry developed IPC/WHMA-A-620 Training and Certification Program. The date of completion is listed as November 09, 2015.
IMG
This document is a certificate from Mastermind Institute of Technology certifying that Mohammed Sharif V.U. passed the final examination in Certificate in Diploma in Graphic & Web Design in 2009 with a grade. The certificate is signed and stamped by the principal of the institute to verify the candidate's achievement.
Actividad 1 tjgc
Este documento contiene un resumen de tres lecturas sobre la calidad y la educación. La primera lectura trata sobre la honestidad y los valores. La segunda habla sobre estudiantes que solo se gradúan pero no emprenden negocios. La tercera señala que la administración de la calidad busca satisfacer a los clientes ofreciendo buenos productos y servicio. También incluye preguntas sobre la administración de la calidad y los ajustes necesarios en las organizaciones.
Coursera ml 2015
Akshay Pratap Singh successfully completed an online Machine Learning course provided by Stanford University through Coursera on December 17, 2014. The course was taught by Associate Professor Andrew Ng of Stanford's Computer Science Department. To pass the course, students had to watch lectures, review questions, and finish programming assignments. This statement does not confer an official Stanford grade, credit, or degree upon Singh.
More Related Content
What's hot
SAIW Welding and Fabrication Inspector Level 2
Maurice Scholtz has been awarded a diploma for SAIW Welding and Fabrication Inspector Level Two by SAIW Certification. He met the education and training requirements for this certification level and passed the required examination administered by the SAIW Certification Governing Board. The diploma recognizes his qualification as a Welding and Fabrication Inspector at Level Two.
dinkar prajapati cv
Dinkar Prajapati is seeking opportunities as an instrument technician with 6 years of experience in instrumentation for petrochemical, fertilizer, and chemical plants. He has worked in Qatar and India, maintaining, calibrating, and troubleshooting various instruments including valves, transmitters, analyzers, and vibration sensors. Prajapati is educated with an instrumentation diploma and ITI certification.
Hire Safety Professional - ASK EHS Safety Personnel Outsourcing Services
Hire Safety Professional - ASK EHS Safety Personnel Outsourcing ServicesASK EHS Engineering & Consultants
Learn More: http://www.ask-ehs.com/ehs-manpower.html
ASK-EHS HEALTH AND SAFETY MANPOWER STAFFING SOLUTIONS.
Employers can contact: +91 922 769 5202 or write us: jobs@ask-ehs.comShanmugam Implant Resumae
Shanmugam Theagarajan is an experienced Implant Equipment Engineer with over 10 years of experience working with various implant toolsets in Singapore and India. He has strong technical skills and problem solving abilities. Currently working as an Implant EE at a semiconductor lab, his responsibilities include routine maintenance, root cause analysis of issues, and planning annual tool maintenance. He is looking to expand his career opportunities to new technical challenges where he can contribute his expertise.
Splunk Certified Knowlege Manager_Imp
This document contains information about an individual named Anushka Jalther who holds the Splunk Certified Knowledge Manager certification. It lists their name, certification, and date along with a version number and license number for the certification.
IASSC LEAN SIX SIGMA YELLOW BELT CERTIFICATE
This certificate recognizes that the individual named has completed the requirements to earn the title of IASSC Lean Six Sigma Yellow Belt. It was issued by International Accreditation for Six Sigma on January 1, 2017 and includes the individual's name, certification number, and date of certification.
Lean Six Sigma Green Belt (CLSSGB)™
This certificate certifies that Ben John Zachariah passed the Lean Six Sigma Green Belt examination according to qualification scheme CLSSGB-Q10-20. The examination was held in Bangalore on June 22, 2020. The certificate is issued by TÜV SÜD South Asia Pvt. Ltd. and bears certificate number IN/3310/25501.
APICS SCOR Professional (SCOR-P)
This document certifies that Alfredo Armijos has earned the designation of SCOR-P (SCOR Professional Endorsement) from APICS (Association for Supply Chain Management) for successfully completing the requirements set by APICS' Certification Committee. The certification is signed by Abe Eshkenazi, APICS Chief Executive Officer, and Steve Georgevitch, 2017 APICS Chair of the Board, and is dated April 19, 2018.
Resume Johnny E Byrd (1)
Johnny Byrd is a rig maintenance supervisor seeking a position to challenge himself and train future generations. He has over 15 years of experience as an electrician, mechanic, and maintenance supervisor on offshore drilling rigs. He is skilled in electrical work, troubleshooting, HVAC, drilling equipment, communications, and dealing with people under stress. He has qualifications and licenses in areas such as bottom bearing operations, marine firefighting, welding, refrigeration, electrical work, and first aid.
Accident Investigation and Root Cause Analysis
This certificate certifies that Basim Safindi completed the course "Accident Investigation and Root Cause Analysis" on July 8, 2015. The certificate is 1 page long and was generated on August 7, 2015 from the Parsons Skillport learning management system.
Resume (Dee) 2016
Dolores "Dee" Gonzales is seeking a position as a safety professional with over 15 years of experience in various safety roles including as a safety permit writer, expediter, trainer, auditor, and advisor. She has an Associate Degree in Occupational Safety and Health Technology from Del Mar College and a Bachelor's Degree in Environmental Health and Safety from Texas A&M CC. Her experience includes working as a safety permit writer at a Tesoro refinery in Alaska, an OSHA safety compliance intern, and as an operations office safety manager. She has numerous safety certifications and has taught a variety of safety training courses.
Pamphlet
Eagle Star Aviation (ESA) was tasked with designing a pylon to allow installation of a Pratt & Whitney PW305A turbofan engine onto a Bombardier CRJ700 aircraft. ESA, composed of 11 engineering students, divided into six departments and received support from industrial partners. The project was completed on schedule and within budget, with static testing validating the finite element analysis of the front engine mount. The systems design complied with certification requirements through various analyses. The manufacturing process was planned to enable delivery of pylons for 60 aircraft and 4 annual retrofits.
VESDA AIR-SAMPLING SMOKE DETECTION SYSTEMS OSID OPEN SMOKE IMAGING DETECTOR
Certificado de Entrenamiento, Aplicación, Diseño, Instalación, Configuración y Mantenimiento de Sistemas de Detección Temprana de Incendios por Aspiración de Humo VESDA by XTRLIS
Aerotek Clinical
Aerotek Scientific is a specialist staffing firm focused on clinical research. They understand the clinical research market and client needs. Their recruiters are educated on industry trends, clinical trials processes, and regulations. Aerotek Scientific recruits candidates for contract, contract-to-hire, and permanent clinical research positions across areas like clinical operations, data management, drug safety and information. Their goal is to provide the perfect candidate fit for each role through customized engagement and a database of over 10 million potential applicants.
Presentationfor manpower requirement at aiims
The document discusses the manpower requirements at AIIMS. It summarizes the current faculty positions, noting 224 vacant positions out of 826 total. It also lists 106 faculty positions approved but pending further approval. For non-faculty posts, it outlines the current positions, vacancies, and status of recruitment for various roles. It concludes mentioning additional non-faculty posts approved or proposed for creation to strengthen departments and programs at AIIMS, totaling over 2,000 positions.
logistics operations manager lean six sigma
Pete Ortega is seeking a warehouse management position that utilizes his 15 years of related experience. He has enclosed his resume and is requesting a personal meeting to further discuss his diverse background in warehouse operations, logistics, import/export, human resources, safety procedures, and other areas. Ortega wishes to contribute his professional skills and leadership abilities, especially in a role with potential for advancement. He hopes his resume and letter provide adequate information to be considered for a position on their professional team.
IPC 620
This document is Akbar Aziz's certificate of completion for the IPC/WHMA-A-620 Requirements and Acceptance for Cable and Wire Harness Assemblies certification course. The certificate designates Akbar Aziz as a Certified IPC Specialist and provides his serial number. It states that he has met all the necessary requirements for the industry developed IPC/WHMA-A-620 Training and Certification Program. The date of completion is listed as November 09, 2015.
IMG
This document is a certificate from Mastermind Institute of Technology certifying that Mohammed Sharif V.U. passed the final examination in Certificate in Diploma in Graphic & Web Design in 2009 with a grade. The certificate is signed and stamped by the principal of the institute to verify the candidate's achievement.
What's hot (18)
Hire Safety Professional - ASK EHS Safety Personnel Outsourcing Services
Hire Safety Professional - ASK EHS Safety Personnel Outsourcing Services
VESDA AIR-SAMPLING SMOKE DETECTION SYSTEMS OSID OPEN SMOKE IMAGING DETECTOR
VESDA AIR-SAMPLING SMOKE DETECTION SYSTEMS OSID OPEN SMOKE IMAGING DETECTOR
Viewers also liked
Actividad 1 tjgc
Este documento contiene un resumen de tres lecturas sobre la calidad y la educación. La primera lectura trata sobre la honestidad y los valores. La segunda habla sobre estudiantes que solo se gradúan pero no emprenden negocios. La tercera señala que la administración de la calidad busca satisfacer a los clientes ofreciendo buenos productos y servicio. También incluye preguntas sobre la administración de la calidad y los ajustes necesarios en las organizaciones.
Coursera ml 2015
Akshay Pratap Singh successfully completed an online Machine Learning course provided by Stanford University through Coursera on December 17, 2014. The course was taught by Associate Professor Andrew Ng of Stanford's Computer Science Department. To pass the course, students had to watch lectures, review questions, and finish programming assignments. This statement does not confer an official Stanford grade, credit, or degree upon Singh.
Comandos
This document provides a single command "fastboot flash recovery recovery.img" that is used to flash a custom recovery image file called "recovery.img" using the fastboot tool on an Android device. Flashing a custom recovery allows users to install custom operating systems, backups and modifications on their Android devices.
Instrucciones energitetris
El documento presenta tres actividades educativas relacionadas con la energía. La primera involucra un juego de mesa llamado "Energitetris" donde los participantes ordenan tarjetas que describen el proceso de generación de energía eléctrica. La segunda instruye a los lectores a realizar "Experiencias electrizantes" mediante experimentos sobre energía. La tercera actividad se llama "Fotopalabra" y desafía a los estudiantes a crear títulos e interpretaciones para imágenes presentadas.
Effects of “The Hole” Poster
Presented this poster about segregation and its effects at the Oklahoma Criminal Justice Association Conference at the University of Central Oklahoma
ResumeNB6_21_2016
Noah Baum is seeking a teaching position to guide students in exploring how to learn and think effectively. He holds a Master's degree in Teaching from The College of New Jersey and studied physics and violin performance at Carnegie Mellon University. His teaching experience includes student teaching at New Brunswick High School and private music lessons. He has conducted research in physics at Carnegie Mellon and Rochester Institute of Technology.
Viewers also liked (12)
More from Eben Smant
Eben Smant New CV1
Eben Smant is an electrician and auto electrician seeking new opportunities. He has over 10 years of experience in electrical installations and service/breakdowns on mobile machinery. He has certificates in electrician training from the Department of Labour as well as safety and machinery training from Sandvik Academy. His work history includes positions at Wessels Manganese Mine, Everest Platinum Mine, and Blue Ridge Platinum Mine performing electrical installations, maintenance, and repairs. References are available upon request.
C6
This certificate certifies that E Smant, with identification number 840828 5135 080, attended and passed a conversion course to become a fitter from January 22, 2007 to April 13, 2007. The certificate was issued by a leading HR partner and accredited training center, and confirms E Smant is qualified as a fitter.
C5
This certificate certifies that E J SMaNT attended an electrician course from July 10, 2006 to December 5, 2006, passed the appropriate tests, and is accredited as an electrician. The certificate is issued by SEIFSA Consultant: Engineering Training and is valid from December 15, 2006.
C8
This certificate of completion certifies that Eben Jaap Smant with ID 8408285135080 completed two training courses on August 3, 2010: a course on heat shrink termination for 11kV 3 core XLPE cables and a course on cold shrink splicing for 11kV 3 core XLPE cables. The certificate was presented by Andre Joubert.
C9
This certificate is awarded to John E. Smart (ID No. 8408285135080) for completing Level 2 training on July 24, 2014. The training covered personal, customer, workshop and environmental safety; laws and regulations concerning the environment; servicing, repairing, and diagnosing faults on AC systems; understanding electrical diagrams and the functions of AC system components; analyzing components in AC systems; operating air-conditioning tooling and equipment; and details on DC current used for HVAC systems.
C1
This certificate from Murray & Roberts Cementation certifies that E. Smart has been granted a license to supervise as of September 21, 2010. The certificate includes the company number R/10763 and is signed by the managing director.
C2
This certificate certifies that Eben Jaap Smant passed a trade test in the occupation of electrician in accordance with the standards of the National Training Board under the Manpower Training Act of 1981 and the Skills Development Act of 1998. The certificate number is 128812 and was issued on January 28, 2009 after Smant was tested on August 26, 2008.
C7
- 1. CE,RTIFICATE, THIS IS TO CERTIFY THAT E J SMANT 840828 5135 080 HAS FULFILLED ALL THE REQTIIREMENTS OF COMPETENCY FOR: STANDARD INDUSTRIAL SAFETY COURSE:SF2 10 JULY 2006 /)k;"abrishedbY SEIFSA ATION NO. I 7-5A/00216/04 ffiIIErsl' i., /4.rA.Centre Operations Manager ,-:::,,- / vou, reaOi"O HR Pafrner Consultant: Engineering Training ACCREDIT