Personal Information
Organization / Workplace
Cincinnati Area, Ohio United States
Industry
Consulting / Advisory
Website
www.leansafetyconsultancy.co
About
Could you benefit from a straightforward and direct answer on environmental health & safety concerns?
Independent Consultant with over 15 years experience in the environmental health & safety field with strong capability working with the Construction, Oil & Gas, Chemical, and Manufacturing Industries on performance transformation initiatives.
I enjoy helping executives of medium to large businesses address their legal obligations to maintain compliance with Federal, State, Local laws and ordinances. I supersede the standards and regulations of OSHA, EPA, and DOT to protect the health, safety, and welfare of the worker and consistently operate an incident free safety program.
Tags
management
osha
health
occupational safety and health
osh
developing the osh training program
oil and gas energy
gas
oil
safety
occupational safety and health manager
trainer
training requirements
lean safety consultancy
jason scott armacost
jason armacost
personal protective equipment
training
compliance
occupational
train the trainer
standards
hazard identification
safety committee education
safety committee purpose
fall protection training
confined spaces
mechanical integrity
elements identifying and evaluating fall hazards
controlling risk factors
training hands-on ppe techniques
ppe training requirements
ppe
scope
administrative controls
engineering controls
oil and gas
occupational safety and health supervisor
leadership development
specialist
occupational safety and health specialist
professional
manager
accident investigation
safety management system components
developing learning activities
trainer roles and responsibilities
safety committee start-up
safety committee function
developing recommendations
professional development
ehsq
certification
united kingdom
international
risk management
iosh
california standard
osha regulations
cal/osha
california
employee participation plan (epp)
reporting unsafe working conditions
ultimate work authority (uwa)
stop work authority (swa)
bsee requirements
records and documentation
exposure to toxic components
investigation of incidents
emergency response and control
sems ii auditing
pre-startup review
safe work practices
management of change
hazards analysis
safety and environmental information
medical services and support
fire prevention
emergency response and notification
working over wate
personal protective equipment (ppe)
hazard reporting
general oil and gas safety guidelines
crane operator qualifications and best practices
compressed gas cylinders
and lifting safety
rigging
control of hazardous chemicals and substances
helicopter safety
material handling
(lockout/tagout)
hazardous energy control
electrical safety practices
pins and keepers
chemical use and storage
safety data sheets
compressed gas
tubular storage
load path welds
ladders and platforms
slings and shackles
handrails and guardrails
gratings and walkways
synthetic web lines
energy isolation and electrical systems
stairways and landings
first aid kits and eye wash stations
fall protection equipment
hand tools and power tools
fire extinguishers and shutdown
alarms
machine guarding
emergency response plan and equipment
repairing liners and casing
coil tubing
hot oiling snubbing
swabbing
cementing
removing the horsehead and wellhead
removing casing: place cement plugs
sidetracking: plug-back
wireline operations
pulling and running rods
well logging
set up work area
rigging up service rig
perforating
transporting rig
beam pumping units
installing production tubing
starting production flow
setting production casing
conducting drill stem test
walking and working surfaces
rigging up safety
drilling ahead safety
breaking out pipe
tripping out and in
casing operations
site maintenance activities
well control safety
blowout prevention program
excavation and trenching
site preparation
exposure to silica and hydrogen sulfide gas
blowouts
material handling hazards
flammable and combustible liquids
hand and power tools
exposure to rotating parts ergonomics
circulating fluid systems
hot work (welding) and fire safet
flare pits and lines
lightning and static electricity
and hoist hazards
derrick
crane
task-specific accidents
drilling operation accidents
drilling site jobs
general safety and health hazards
steps to identify osha requirements
conducting on-the-job training
safety education and training
hazard prevention and control
safety management system (sms) and wellsite analys
employee and management involvement in safety safe
hierarchy of control strategies
working with contractors
writing safety policies and programs
the safety culture
competent and qualified persons
identifying and evaluating construction fall hazar
supported and suspended access
fall protection platforms
safe practices on scaffolds
pfas equipment inspection
pfas equipment maintenance
rescue at height
personal fall arrest/restraint systems
risk: frequency vs. exposure to falls
safe ladder practices
fall protection hierarchy of controls
preparing to prevent falls
common construction fall causes
determination of soil type
methods of protection
nstallation and removal of protective systems
sloping methods
entering and exiting the excavation
soil types and pressures
soil mechanic
common soil problems
osha standard scope and application
specific bloodborne pathogens
transmitting bloodborne pathogens
recognizing the potential for exposure
housekeeping methods to control the risk of exposu
communicating hazards in the workplace
developing an exposure control plan
hepatitis b immunization
what are bloodborne pathogens
hearing conservation programs
conservation programs | hearing protection device
record keeping
standard threshold shift
required monitoring
hazard elimination or reduction
audiometric testing
required training
walk around survey
evaluating exposures
fundamentals of hearing
introduction to sound and noise
temperature-humidity extremes
ergonomic hazards
recognizing and controlling industrial health haza
physical hazards
noise and hearing protection
vibration hazards
illumination hazards
indoor and outdoor air quality
worksite analysis
role of the industrial hygienist
definition of industrial hygiene
operating procedures
developing the written psm plan
hot work permit
employer and contractor responsibilites
process hazard analysis (pha)
employee participation
how the psm standard applies
caaa requirements
process safety management standard
trip controls
restraints
miscellaneous aids
devices
methods of machine safeguarding - guards
machinery maintenance and repair
machine guard construction
basics of machine guarding
sequencing the training presentation
effective introductions
overcoming the psychological stress of training
listening skills
logistics to consider in preparation for training
periodic medical examinations
gathering evidence of msds
ergonomics job hazard analysis
education and training
proactive and reactive approaches
screening for risk factors
medical management
workplace ergonomics analysis techniques
symptoms surveys
ergonomics program elements
writing goals and operational learning objectives
recommendations
sequencing training
determining training needs
training decision-tree
documentation requirements
determining training and non-training solutions
program recovery
training strategies
post-incident follow-up
investigation
incident reporting
writing policy and plans
employee assistance program
organizational recovery
violence prevention program (vpp) components
assessment and security review
prevention measures
warning signs
defining workplace violence
driver training and evaluation
licensing
driver qualification standards
accident investigations
transporting people and equipment
vehicle inspections
costs of vehicle accidents
fpp evaluation
class a and b combustible materials
employee alarm systems
fixed extinguishing systems
exit routes
open flame work
welding
cutting
office fire hazards
identifying and controlling fire hazards
portable heaters
fire prevention plan (fpp) components
employees duties and responsibilities
evacuation warden duties and responsibilities
plan administrator duties and responsibilities
management duties and responsibilities
plan review
eap training and drills
assembly areas
evacuation routes
natural and man-made emergencies
eap development | eap policies and procedures
emergency action plan (eap) components
safety management system evaluation principles
cause and effect (fishbone) diagrams
5-why analysis
conducting inspections
interviewing techniques
baseline surveys
principles
safety management system concepts
ground fault circuit interrupter (gfci) protection
live-work safe practices
lockout/tagout
power tool safety
hand tool safety
assured equipment grounding conductor program
controlling electrical hazards
electrical safety model
electrical hazards evaluation
nature of electricity
training requirements rescue at height
safety net systems
personal fall arrest systems (pfas)
guardrail systems
cranes and derrick suspended personnel platforms
adjustable-suspension scaffolds
aerial lifts
supported scaffolds
portable ladders
fall protection program
hazards of working at elevation
confined space training and drill
confined space entry team
permit-required confined spaces
confined space rescue
categories of confined spaces
not-atmospheric hazards
controlling hazards
confined space program components
atmospheric hazards
osha standard 29 cfr 1910.146
accountability and administering discipline
creating an effective safety culture
basic safety leadership styles
providing safety training
correcting hazards
job hazard analysis
safety inspections
identifying hazards
overview of supervisor responsibilities
making system improvements
substitution
elimination
risk factor areas
impact of ergonomics injuries
ergonomics definitions
purpose
group loto
contractor responsibilities
29 cfr 1910.147
alternative steps
release from loto
testing
shutdown
preparing for shutdown
shift change procedures
loto steps
materials and hardware
lockout/tagout training and communication
periodic inspections
energy control program components
hearing protection
electrical protective equipment
eye and face protection
employee-owned equipment
ppe categories
general requirements for personal protective equip
osha 300a
osha 300
calculating injury/illness incident rates
introduction to osha 300/300a form completion
forms maintenance
general and additional recording criteria
determining work-relatedness
employer and employee responsibilities
post-meeting responsibilities
handling disagreement and conflict
decision-making
problem solving techniques
safety committee communication
conducting the meeting
meeting preparation
role and responsibilities
innovative safety committees
commitment
overview of osha requirements
improving the jha process
writing the safe job procedure
listing preventive measures
describing hazards
listing the steps
the jha process
using the jha worksheet
prioritizing jhas
severity and risk
determining probability
jha techniques
jha principles
job hazard analysis (jha) preparation
application and program responsibilities
hazcom information and training requirements
practical exercise
safety data sheet (sds)
container labeling
routes of entry
forms of hazardous chemicals
analyzing for hazardous chemicals
writing effective recommendations
problem solving
elimination substitution
hierarchy of controls
analyzing the workplace
process hazard areas and categories
definition of hazard and exposure
safety committee member
safety committee chair
oil and gas safety and health trainer
oi
oil and gas safety and health supervisor
energy
oil and gas safety and health specialist
oil rig
oil and gas safety and health professional
fracking
oil and gas safety and health manager
supervisor
construction
industrial
occupationa
occupational safety and health professional
requirements
principles of total quality safety management
basics safety education and training
hazard control strategies
effective communications
employee involvement
commitment accountability
evaluating training presentation and program
developing goals and operational objectives
improving the training program
documenting the training
conducting the training
needs analysis
definition of education and training
controls
managing safety committee meetings
analysis
training problem-solving techniques
motivational principles
safety committee role
selling management on recommendations
writing the accident report
determining surface and root causes
conducting event analysis
conducting interviews
documenting the accident scene
initiating the investigation
purpose of the accident investigation
project management
lean six sigma
See more
Presentations
(48)Documents
(1)Likes
(47)Offshore Oil and Gas Safety I
Lean Safety Consultancy, LLC.
•
5 years ago
Offshore Oil and Gas Safety II
Lean Safety Consultancy, LLC.
•
5 years ago
Oil and Gas Well Inspection
Lean Safety Consultancy, LLC.
•
5 years ago
Well Site Completion and Servicing Safety
Lean Safety Consultancy, LLC.
•
5 years ago
Well Site Preparation and Drilling Safety
Lean Safety Consultancy, LLC.
•
5 years ago
Oil and Gas Hazard Awareness
Lean Safety Consultancy, LLC.
•
5 years ago
Oil and Gas Safety Management
Lean Safety Consultancy, LLC.
•
5 years ago
Trench and Excavation Safety
Lean Safety Consultancy, LLC.
•
5 years ago
Bloodborne Pathogens Program Management
Lean Safety Consultancy, LLC.
•
5 years ago
Hearing Conservation Program Management
Lean Safety Consultancy, LLC.
•
5 years ago
Introduction to Industrial Hygiene
Lean Safety Consultancy, LLC.
•
5 years ago
Introduction to Process Safety Management (PSM)
Lean Safety Consultancy, LLC.
•
5 years ago
Introduction to Machine Guarding
Lean Safety Consultancy, LLC.
•
5 years ago
Conducting OSH Training
Lean Safety Consultancy, LLC.
•
5 years ago
Ergonomics Program Management
Lean Safety Consultancy, LLC.
•
5 years ago
Preventing Workplace Violence
Lean Safety Consultancy, LLC.
•
5 years ago
Fleet Safety Management
Lean Safety Consultancy, LLC.
•
5 years ago
Fire Prevention Plans
Lean Safety Consultancy, LLC.
•
5 years ago
Emergency Action Plans
Lean Safety Consultancy, LLC.
•
5 years ago
Safety Management System Evaluation
Lean Safety Consultancy, LLC.
•
5 years ago
Electrical Safety for Technicians & Supervisors
Lean Safety Consultancy, LLC.
•
5 years ago
Fall Protection Program
Lean Safety Consultancy, LLC.
•
5 years ago
Confined Space Program
Lean Safety Consultancy, LLC.
•
5 years ago
Safety Supervision and Leadership
Lean Safety Consultancy, LLC.
•
5 years ago
Introduction to Ergonomics
Lean Safety Consultancy, LLC.
•
5 years ago
Personal Protective Equipment
Lean Safety Consultancy, LLC.
•
5 years ago
OSHA Recordkeeping Basics
Lean Safety Consultancy, LLC.
•
5 years ago
Effective OSH Committee Meetings
Lean Safety Consultancy, LLC.
•
5 years ago
Conducting a Job Hazard Analysis (JHA)
Lean Safety Consultancy, LLC.
•
5 years ago
Hazard Communication Program
Lean Safety Consultancy, LLC.
•
5 years ago
Personal Information
Organization / Workplace
Cincinnati Area, Ohio United States
Industry
Consulting / Advisory
Website
www.leansafetyconsultancy.co
About
Could you benefit from a straightforward and direct answer on environmental health & safety concerns?
Independent Consultant with over 15 years experience in the environmental health & safety field with strong capability working with the Construction, Oil & Gas, Chemical, and Manufacturing Industries on performance transformation initiatives.
I enjoy helping executives of medium to large businesses address their legal obligations to maintain compliance with Federal, State, Local laws and ordinances. I supersede the standards and regulations of OSHA, EPA, and DOT to protect the health, safety, and welfare of the worker and consistently operate an incident free safety program.
Tags
management
osha
health
occupational safety and health
osh
developing the osh training program
oil and gas energy
gas
oil
safety
occupational safety and health manager
trainer
training requirements
lean safety consultancy
jason scott armacost
jason armacost
personal protective equipment
training
compliance
occupational
train the trainer
standards
hazard identification
safety committee education
safety committee purpose
fall protection training
confined spaces
mechanical integrity
elements identifying and evaluating fall hazards
controlling risk factors
training hands-on ppe techniques
ppe training requirements
ppe
scope
administrative controls
engineering controls
oil and gas
occupational safety and health supervisor
leadership development
specialist
occupational safety and health specialist
professional
manager
accident investigation
safety management system components
developing learning activities
trainer roles and responsibilities
safety committee start-up
safety committee function
developing recommendations
professional development
ehsq
certification
united kingdom
international
risk management
iosh
california standard
osha regulations
cal/osha
california
employee participation plan (epp)
reporting unsafe working conditions
ultimate work authority (uwa)
stop work authority (swa)
bsee requirements
records and documentation
exposure to toxic components
investigation of incidents
emergency response and control
sems ii auditing
pre-startup review
safe work practices
management of change
hazards analysis
safety and environmental information
medical services and support
fire prevention
emergency response and notification
working over wate
personal protective equipment (ppe)
hazard reporting
general oil and gas safety guidelines
crane operator qualifications and best practices
compressed gas cylinders
and lifting safety
rigging
control of hazardous chemicals and substances
helicopter safety
material handling
(lockout/tagout)
hazardous energy control
electrical safety practices
pins and keepers
chemical use and storage
safety data sheets
compressed gas
tubular storage
load path welds
ladders and platforms
slings and shackles
handrails and guardrails
gratings and walkways
synthetic web lines
energy isolation and electrical systems
stairways and landings
first aid kits and eye wash stations
fall protection equipment
hand tools and power tools
fire extinguishers and shutdown
alarms
machine guarding
emergency response plan and equipment
repairing liners and casing
coil tubing
hot oiling snubbing
swabbing
cementing
removing the horsehead and wellhead
removing casing: place cement plugs
sidetracking: plug-back
wireline operations
pulling and running rods
well logging
set up work area
rigging up service rig
perforating
transporting rig
beam pumping units
installing production tubing
starting production flow
setting production casing
conducting drill stem test
walking and working surfaces
rigging up safety
drilling ahead safety
breaking out pipe
tripping out and in
casing operations
site maintenance activities
well control safety
blowout prevention program
excavation and trenching
site preparation
exposure to silica and hydrogen sulfide gas
blowouts
material handling hazards
flammable and combustible liquids
hand and power tools
exposure to rotating parts ergonomics
circulating fluid systems
hot work (welding) and fire safet
flare pits and lines
lightning and static electricity
and hoist hazards
derrick
crane
task-specific accidents
drilling operation accidents
drilling site jobs
general safety and health hazards
steps to identify osha requirements
conducting on-the-job training
safety education and training
hazard prevention and control
safety management system (sms) and wellsite analys
employee and management involvement in safety safe
hierarchy of control strategies
working with contractors
writing safety policies and programs
the safety culture
competent and qualified persons
identifying and evaluating construction fall hazar
supported and suspended access
fall protection platforms
safe practices on scaffolds
pfas equipment inspection
pfas equipment maintenance
rescue at height
personal fall arrest/restraint systems
risk: frequency vs. exposure to falls
safe ladder practices
fall protection hierarchy of controls
preparing to prevent falls
common construction fall causes
determination of soil type
methods of protection
nstallation and removal of protective systems
sloping methods
entering and exiting the excavation
soil types and pressures
soil mechanic
common soil problems
osha standard scope and application
specific bloodborne pathogens
transmitting bloodborne pathogens
recognizing the potential for exposure
housekeeping methods to control the risk of exposu
communicating hazards in the workplace
developing an exposure control plan
hepatitis b immunization
what are bloodborne pathogens
hearing conservation programs
conservation programs | hearing protection device
record keeping
standard threshold shift
required monitoring
hazard elimination or reduction
audiometric testing
required training
walk around survey
evaluating exposures
fundamentals of hearing
introduction to sound and noise
temperature-humidity extremes
ergonomic hazards
recognizing and controlling industrial health haza
physical hazards
noise and hearing protection
vibration hazards
illumination hazards
indoor and outdoor air quality
worksite analysis
role of the industrial hygienist
definition of industrial hygiene
operating procedures
developing the written psm plan
hot work permit
employer and contractor responsibilites
process hazard analysis (pha)
employee participation
how the psm standard applies
caaa requirements
process safety management standard
trip controls
restraints
miscellaneous aids
devices
methods of machine safeguarding - guards
machinery maintenance and repair
machine guard construction
basics of machine guarding
sequencing the training presentation
effective introductions
overcoming the psychological stress of training
listening skills
logistics to consider in preparation for training
periodic medical examinations
gathering evidence of msds
ergonomics job hazard analysis
education and training
proactive and reactive approaches
screening for risk factors
medical management
workplace ergonomics analysis techniques
symptoms surveys
ergonomics program elements
writing goals and operational learning objectives
recommendations
sequencing training
determining training needs
training decision-tree
documentation requirements
determining training and non-training solutions
program recovery
training strategies
post-incident follow-up
investigation
incident reporting
writing policy and plans
employee assistance program
organizational recovery
violence prevention program (vpp) components
assessment and security review
prevention measures
warning signs
defining workplace violence
driver training and evaluation
licensing
driver qualification standards
accident investigations
transporting people and equipment
vehicle inspections
costs of vehicle accidents
fpp evaluation
class a and b combustible materials
employee alarm systems
fixed extinguishing systems
exit routes
open flame work
welding
cutting
office fire hazards
identifying and controlling fire hazards
portable heaters
fire prevention plan (fpp) components
employees duties and responsibilities
evacuation warden duties and responsibilities
plan administrator duties and responsibilities
management duties and responsibilities
plan review
eap training and drills
assembly areas
evacuation routes
natural and man-made emergencies
eap development | eap policies and procedures
emergency action plan (eap) components
safety management system evaluation principles
cause and effect (fishbone) diagrams
5-why analysis
conducting inspections
interviewing techniques
baseline surveys
principles
safety management system concepts
ground fault circuit interrupter (gfci) protection
live-work safe practices
lockout/tagout
power tool safety
hand tool safety
assured equipment grounding conductor program
controlling electrical hazards
electrical safety model
electrical hazards evaluation
nature of electricity
training requirements rescue at height
safety net systems
personal fall arrest systems (pfas)
guardrail systems
cranes and derrick suspended personnel platforms
adjustable-suspension scaffolds
aerial lifts
supported scaffolds
portable ladders
fall protection program
hazards of working at elevation
confined space training and drill
confined space entry team
permit-required confined spaces
confined space rescue
categories of confined spaces
not-atmospheric hazards
controlling hazards
confined space program components
atmospheric hazards
osha standard 29 cfr 1910.146
accountability and administering discipline
creating an effective safety culture
basic safety leadership styles
providing safety training
correcting hazards
job hazard analysis
safety inspections
identifying hazards
overview of supervisor responsibilities
making system improvements
substitution
elimination
risk factor areas
impact of ergonomics injuries
ergonomics definitions
purpose
group loto
contractor responsibilities
29 cfr 1910.147
alternative steps
release from loto
testing
shutdown
preparing for shutdown
shift change procedures
loto steps
materials and hardware
lockout/tagout training and communication
periodic inspections
energy control program components
hearing protection
electrical protective equipment
eye and face protection
employee-owned equipment
ppe categories
general requirements for personal protective equip
osha 300a
osha 300
calculating injury/illness incident rates
introduction to osha 300/300a form completion
forms maintenance
general and additional recording criteria
determining work-relatedness
employer and employee responsibilities
post-meeting responsibilities
handling disagreement and conflict
decision-making
problem solving techniques
safety committee communication
conducting the meeting
meeting preparation
role and responsibilities
innovative safety committees
commitment
overview of osha requirements
improving the jha process
writing the safe job procedure
listing preventive measures
describing hazards
listing the steps
the jha process
using the jha worksheet
prioritizing jhas
severity and risk
determining probability
jha techniques
jha principles
job hazard analysis (jha) preparation
application and program responsibilities
hazcom information and training requirements
practical exercise
safety data sheet (sds)
container labeling
routes of entry
forms of hazardous chemicals
analyzing for hazardous chemicals
writing effective recommendations
problem solving
elimination substitution
hierarchy of controls
analyzing the workplace
process hazard areas and categories
definition of hazard and exposure
safety committee member
safety committee chair
oil and gas safety and health trainer
oi
oil and gas safety and health supervisor
energy
oil and gas safety and health specialist
oil rig
oil and gas safety and health professional
fracking
oil and gas safety and health manager
supervisor
construction
industrial
occupationa
occupational safety and health professional
requirements
principles of total quality safety management
basics safety education and training
hazard control strategies
effective communications
employee involvement
commitment accountability
evaluating training presentation and program
developing goals and operational objectives
improving the training program
documenting the training
conducting the training
needs analysis
definition of education and training
controls
managing safety committee meetings
analysis
training problem-solving techniques
motivational principles
safety committee role
selling management on recommendations
writing the accident report
determining surface and root causes
conducting event analysis
conducting interviews
documenting the accident scene
initiating the investigation
purpose of the accident investigation
project management
lean six sigma
See more