FOR MORE CLASSES VISIT
www.bus611mart.com
Data-Driven Decision Making Using Microsoft Excel This assignment must be completed and submitted using a Microsoft Excel spreadsheet (.xls). Provide a source for each equation
BUS 611 Education Redefined / snaptutorial.comMcdonaldRyan196
For more classes visit
www.snaptutorial.com
Data-Driven Decision Making Using Microsoft Excel
This assignment must be completed and submitted using a Microsoft Excel spreadsheet (.xls). Provide a source for each equation you use. Sources must be
Bus 611 Enhance teaching / snaptutorial.comStokesCope164
For more classes visit
www.snaptutorial.com
Data-Driven Decision Making Using Microsoft Excel
This assignment must be completed and submitted using a Microsoft Excel spreadsheet (.xls). Provide a source for each equation you use. Sources must be listed at the bottom of the spreadsheet. No title page or additional formatting is required.
1. Channels of Communication
o It has been estimated that project managers spend up to 90% of their time
BUS 611 Exceptional Education - snaptutorial.com donaldzs145
For more classes visit
www.snaptutorial.com
Data-Driven Decision Making Using Microsoft Excel
This assignment must be completed and submitted using a Microsoft Excel spreadsheet (.xls). Provide a source for each equation you use. Sources must be listed at the bottom of the spreadsheet. No title page or additional formatting is required.
BUS 611 Education Specialist / snaptutorial.comstevesonz123
For more classes visit
www.snaptutorial.com
Data-Driven Decision Making Using Microsoft Excel
This assignment must be completed and submitted using a Microsoft Excel spreadsheet (.xls). Provide a source for each equation you use. Sources must be listed at the bottom of the spreadsheet. No title
Bus 611 Education Organization -- snaptutorial.comDavisMurphyB66
For more classes visit
www.snaptutorial.com
Data-Driven Decision Making Using Microsoft Excel
This assignment must be completed and submitted using a Microsoft Excel spreadsheet (.xls). Provide a source for each equation you use. Sources must be listed at the bottom of the spreadsheet. No title page or additional formatting is required.
This document provides instructions for an assignment involving data-driven decision making using Microsoft Excel for a project at Roto Air. It includes four sections requiring calculations and analysis of: 1) communication channels on a project team, 2) benefit-cost ratios of two potential projects, 3) payback periods of the two projects, and 4) net present value of one of the projects. The assignment aims to help students practice quantitative analysis and compare alternative investment options using various metrics.
For more course tutorials visit
www.newtonhelp.com
Data-Driven Decision Making Using Microsoft Excel
This assignment must be completed and submitted using a Microsoft Excel spreadsheet (.xls). Provide a source for each equation you use. Sources must be listed at the bottom of the spreadsheet. No title page or additional formatting is required.
BUS 611 Extraordinary Success |snaptutorial.comladworkspaces
For more classes visit
www.snaptutorial.com
Data-Driven Decision Making Using Microsoft Excel
This assignment must be completed and submitted using a Microsoft Excel spreadsheet (.xls). Provide a source for each equation you use. Sources must be listed at the bottom of the spreadsheet. No title page or additional formatting is required.
BUS 611 Education Redefined / snaptutorial.comMcdonaldRyan196
For more classes visit
www.snaptutorial.com
Data-Driven Decision Making Using Microsoft Excel
This assignment must be completed and submitted using a Microsoft Excel spreadsheet (.xls). Provide a source for each equation you use. Sources must be
Bus 611 Enhance teaching / snaptutorial.comStokesCope164
For more classes visit
www.snaptutorial.com
Data-Driven Decision Making Using Microsoft Excel
This assignment must be completed and submitted using a Microsoft Excel spreadsheet (.xls). Provide a source for each equation you use. Sources must be listed at the bottom of the spreadsheet. No title page or additional formatting is required.
1. Channels of Communication
o It has been estimated that project managers spend up to 90% of their time
BUS 611 Exceptional Education - snaptutorial.com donaldzs145
For more classes visit
www.snaptutorial.com
Data-Driven Decision Making Using Microsoft Excel
This assignment must be completed and submitted using a Microsoft Excel spreadsheet (.xls). Provide a source for each equation you use. Sources must be listed at the bottom of the spreadsheet. No title page or additional formatting is required.
BUS 611 Education Specialist / snaptutorial.comstevesonz123
For more classes visit
www.snaptutorial.com
Data-Driven Decision Making Using Microsoft Excel
This assignment must be completed and submitted using a Microsoft Excel spreadsheet (.xls). Provide a source for each equation you use. Sources must be listed at the bottom of the spreadsheet. No title
Bus 611 Education Organization -- snaptutorial.comDavisMurphyB66
For more classes visit
www.snaptutorial.com
Data-Driven Decision Making Using Microsoft Excel
This assignment must be completed and submitted using a Microsoft Excel spreadsheet (.xls). Provide a source for each equation you use. Sources must be listed at the bottom of the spreadsheet. No title page or additional formatting is required.
This document provides instructions for an assignment involving data-driven decision making using Microsoft Excel for a project at Roto Air. It includes four sections requiring calculations and analysis of: 1) communication channels on a project team, 2) benefit-cost ratios of two potential projects, 3) payback periods of the two projects, and 4) net present value of one of the projects. The assignment aims to help students practice quantitative analysis and compare alternative investment options using various metrics.
For more course tutorials visit
www.newtonhelp.com
Data-Driven Decision Making Using Microsoft Excel
This assignment must be completed and submitted using a Microsoft Excel spreadsheet (.xls). Provide a source for each equation you use. Sources must be listed at the bottom of the spreadsheet. No title page or additional formatting is required.
BUS 611 Extraordinary Success |snaptutorial.comladworkspaces
For more classes visit
www.snaptutorial.com
Data-Driven Decision Making Using Microsoft Excel
This assignment must be completed and submitted using a Microsoft Excel spreadsheet (.xls). Provide a source for each equation you use. Sources must be listed at the bottom of the spreadsheet. No title page or additional formatting is required.
For more course tutorials visit
www.newtonhelp.com
Data-Driven Decision Making Using Microsoft Excel
This assignment must be completed and submitted using a Microsoft Excel spreadsheet (.xls). Provide a source for each equation you use. Sources must be listed at the bottom of the spreadsheet. No title page or additional formatting is required.
This document provides instructions for a final project management report assignment. The report must educate new management at a company recently purchased by Roto Air on the benefits of project management. It must define key project management concepts, explain benefits, and make recommendations. Specifically, it outlines 15 topics that must be addressed in the 3,500-4,500 word APA formatted report, including defining projects, benefits of various tools and methods, and the importance of risk management and data-driven decision making. Sources and headings are required.
The document provides details for an assignment involving data-driven decision making using Microsoft Excel for a project at Roto Air. It includes instructions to calculate channels of communication for different team sizes, benefit-cost ratios for two potential projects, payback periods, and net present value. It also describes a scenario for using Smartsheet project management software to plan the Quick Drop 100 transition project. Key calculations and decisions include determining which project has a higher benefit-cost ratio and shorter payback period based on numerical analyses.
For more course tutorials visit
www.newtonhelp.com
Case Study 1 (Part A)
Analyze the impact of business transactions on accounts; record (journalize and post) transactions in the books;
Cmgt 410 cmgt410 cmgt 410 education for service uopstudy.comUOPCourseHelp
The document provides instructions for several assignments for a project management course (CMGT 410). It discusses choosing a project methodology, developing various project documents like a project plan, scope statement, work breakdown structure (WBS), cost model, and risk register. Students are asked to apply concepts from the course to a case study scenario about developing a wellness app for a company. They must select an appropriate methodology, create project documents, track costs and risks, and recommend management strategies.
The objective of this assignment is to encourage the students to.docxdennisa15
The objective of this assignment is to encourage the students to use excel spreadsheets to aid in problem solving. Students are asked to solve a capital budgeting problem using an excel spreadsheet.
Format: The assignment is a problem solving exercise using an excel spreadsheet with additional discussion on findings considering both quantitative measures and qualitative issues.
Documents: Students should submit the following documents IN HARD COPY SUBMISSION:
· an assignment COVER sheet
· a copy of the FORMAL report
· a copy of the EXCEL spreadsheet displaying VALUES
· a copy of the EXCEL spreadsheet displaying excel FORMULAS
Online Submission: Link and details will be available on Canvas.
For online submission on Canvas via Turnitin, submit ONLY ONE FILE including
ONLY
the
Assignment
Cover
Page
along
with
the
copy
of
Formal
Report
.
Details of Assignment
Assume that you are an adviser at HITECH Ltd, which is analysing the introduction of a new game console named NEUROFORCE. This system can be connected with human brain functions and still very much controversial for claimed but yet to be confirmed adverse impacts on human behaviour after prolonged application. Health conscious groups are also lobbying against introduction of such games with probable detrimental effects.
The project manager of HITECH Ltd needs a detail analysis on this exciting NEUROFORCE project. She comes into your office, drops a consultant’s report on your desk, and complains, “We paid these consultants $1 million for this report, and I am not sure their financial analysis makes sense, though their estimations seem to be correct. Before we spend $30 million on
buying new equipment needed for this project, look it over and give me your opinion.” You open the report and find the following information and estimates:
The project will continue for next 7 years, by that time more reliable information on possible adverse impacts of using NEUROFORCE will be available. It is projected that equipment will have economic life of 10 years. After buying the equipment, it requires to renovate the production bay at HITECH Ltd and install the equipment at a total cost of $1 million. These renovation and installation costs are to be considered as capital expenditures. Staff training cost of $100,000 is to be incurred initially at the start of the project.
The equipment will be procured from SWEDEN and HITECH Ltd has to pay 8% import duty on purchase price, whereas the supplier will pay transportation costs of $70,000. These property, plant and equipment (PPE) would be depreciated over its useful life of 10 years using a tax allowable straight-line rate of 10%. However, the company is planning to sell the equipment at the end of the project for an estimated price of $6 million.
Consultants estimate that 48,000 NEUROFORCE consoles can be sold in the first year with an expected increase by 25% in each year for next two years; afterwards sales are expected to decr.
Page 1 of 7 Fin516 201830 Assessment 2 Value 30.docxkarlhennesey
Page 1 of 7
Fin516 201830 Assessment 2
Value: 30%
Due date: 17-April-2018
Submission method options: Turitin
Task – Answer all questions.
Question 1 45 marks
Corning Limited, one of the leading glass producers, is currently evaluating a potential new
product; a tough but light curved glass designed for unusually shaped tall buildings and office
blocks. The new product would cost more than their usual commercial exterior glasses and in
market research conducted by the company’s research department at a cost of $650,000 it
was judged superior to various competing products. Monica Andrews, the Chief Financial
Officer, must analyse this project, along with other potential investments, and then present
her findings to the company’s executive committee.
The project will require construction of a new plant that would have an annual capacity of
75,000 tons and will cost an estimated $18,500,000 to build. The estimated purchase cost of
machinery is $13,500,000 but shipping costs to move the machinery to the plant would total
$425,000 and the estimated installation charge is another $575,000.The land on which the
plant will be built has been vacant since it was bought three years ago at a cost of $750,000,
which has already been paid and expensed for tax purposes.
The company expects its new plant to produce 65,000 tons of glass per year and the
management of Corning anticipates they can sell the product at $350 per ton allowing the
company to gain 10% market share in the first year of operation. Fixed costs are expected to
average $12,500,000 annually while variable costs are estimated to be around $125 per ton.
The plant and machinery will be depreciated to zero on a straight-line basis over ten years,
with an estimated sale value of $1,000,000 after 10 years at the end of the project.
Corning requires 11.5% return on the project. The company tax rate is 30%.
Now assume that you are an assistant to Monica and she has asked you to analyse the project
and then to present your findings to her. Therefore,
a. Calculate the project’s incremental cash flow for each year and present in a tabular form.
15 marks
b. Using the incremental cash flows calculate the project’s:
i. Payback Period 1.5 marks
ii. Net Present Value 5 marks
iii. Profitability Index 2 marks
iv. Discounted Payback Period 1.5 marks
v. Internal Rate of Return using interpolation method 7 marks
c. Identify and discuss any further information that you may requ ...
The document provides specifications for developing a website for Global Toys, a large toy shop. The key points are:
1. The website needs to provide information on the shop layout and selection of toys. Images and details are provided in a ZIP file including toy images and descriptions.
2. Requirements include displaying the shop logo on each page, using the provided toy images and names, and generating a page with the business hours.
3. Users should be able to view toy images and get more details by clicking. Clicking on sections of the floor plan should show the toys in that area.
4. The assessment involves developing mockups, adding images and navigation, designing pages for hours and contact
BA 620 Managerial Finance Group Problem Set 2 (125 poi.docxrosemaryralphs52525
BA 620 Managerial Finance
Group Problem Set 2 (125 points)
This problem Set is based on materials covered in modules 5, 6, and 7. It is designed
for you to demonstrate your understanding and be able to apply basic capital budgeting
concepts, working capital management, dividend policy, and international financial
management.
Part 1: Capital Budgeting Analysis
Adams, Incorporated would like to add a new line of business to its existing retail
business. The new line of business will be the manufacturing and distribution of animal
feeds. This is a major capital project. Adams, Incorporated is aware you an in an MBA
program and would like you to help analysis the viability of this major business venture
based on the following information:
• The production line would be set up in an empty lot the company owns.
• The machinery’s invoice price would be approximately $200,000, another
$10,000 in shipping charges would be required, and it would cost an additional
$30,000 to install the equipment.
• The machinery has useful life of 4 years, and it is a MACRS 3-year asset.
• The machinery is expected to have a salvage value of $25,000 after 4 years of
use.
• This new line of business will generate incremental sales of 1,250 units per year
for 4 years at an incremental cost of $100 per unit in the first year, excluding
depreciation. Each unit can be sold for $200 in the first year. The sales price
and cost are expected to increase by 3% per year due to inflation.
• Net working capital would have to increase by an amount equal to 12% of sales
revenues. The firm’s tax rate is 40%, and its overall weighted average cost of
capital is 10%.
Required:
1. If the company spent $40,000 last year in the upkeep of the empty lot, should this
cost be included in the analysis? Why or why not?
2. Disregard the assumptions in part 1 above. What is the machinery’s depreciable
basis? What are the annual depreciation expenses?
3. Calculate the annual sales revenues and costs (other than depreciation).
4. Construct annual incremental operating cash flow statements.
5. Estimate the required net working capital for each year based on sales for the
following year. Working capital will be recovered at the end of year 4.
6. Calculate the after-tax salvage cash flow.
7. Calculate the net cash flows for each year. Based on these cash flows, what are
the project’s NPV, IRR, Profitability Index (PI), and payback?
8. Can you use the Payback method to decide whether this is a good project or
not? Why or why not?
9. Interpret what NPV, IRR, and Profitability Index (PI) mean. Based on your
interpretation, do these indicators suggest the new business line should be
undertaken?
Part 2: Working Capital Management
1. Adams Stores, Inc. is trying to determine the effect of its inventory turnover ratio and days
sales outstanding (DSO) on its cash flow cycle. Adams’ sales last year (.
BA 620 Managerial Finance Group Problem Set 2 (125 poi.docxwilcockiris
This document outlines a communication plan for a project aimed at preventing pressure injuries in critical care patients. The plan identifies stakeholders, including nursing staff, and discusses various communication methods like meetings, presentations, and an online forum. Effective communication is emphasized as critical for project success. The initial team meetings are identified as important for building rapport and trust through introductions and discussing the project background and goals. Biweekly meetings of Skin and Wound Assessment Nurses are also included for ongoing discussion, feedback, and addressing barriers. An online collaborative site will facilitate information sharing among the different hospital units and staff schedules.
हिंदी वर्णमाला पीपीटी, hindi alphabet PPT presentation, hindi varnamala PPT, Hindi Varnamala pdf, हिंदी स्वर, हिंदी व्यंजन, sikhiye hindi varnmala, dr. mulla adam ali, hindi language and literature, hindi alphabet with drawing, hindi alphabet pdf, hindi varnamala for childrens, hindi language, hindi varnamala practice for kids, https://www.drmullaadamali.com
Reimagining Your Library Space: How to Increase the Vibes in Your Library No ...Diana Rendina
Librarians are leading the way in creating future-ready citizens – now we need to update our spaces to match. In this session, attendees will get inspiration for transforming their library spaces. You’ll learn how to survey students and patrons, create a focus group, and use design thinking to brainstorm ideas for your space. We’ll discuss budget friendly ways to change your space as well as how to find funding. No matter where you’re at, you’ll find ideas for reimagining your space in this session.
How to Make a Field Mandatory in Odoo 17Celine George
In Odoo, making a field required can be done through both Python code and XML views. When you set the required attribute to True in Python code, it makes the field required across all views where it's used. Conversely, when you set the required attribute in XML views, it makes the field required only in the context of that particular view.
বাংলাদেশের অর্থনৈতিক সমীক্ষা ২০২৪ [Bangladesh Economic Review 2024 Bangla.pdf] কম্পিউটার , ট্যাব ও স্মার্ট ফোন ভার্সন সহ সম্পূর্ণ বাংলা ই-বুক বা pdf বই " সুচিপত্র ...বুকমার্ক মেনু 🔖 ও হাইপার লিংক মেনু 📝👆 যুক্ত ..
আমাদের সবার জন্য খুব খুব গুরুত্বপূর্ণ একটি বই ..বিসিএস, ব্যাংক, ইউনিভার্সিটি ভর্তি ও যে কোন প্রতিযোগিতা মূলক পরীক্ষার জন্য এর খুব ইম্পরট্যান্ট একটি বিষয় ...তাছাড়া বাংলাদেশের সাম্প্রতিক যে কোন ডাটা বা তথ্য এই বইতে পাবেন ...
তাই একজন নাগরিক হিসাবে এই তথ্য গুলো আপনার জানা প্রয়োজন ...।
বিসিএস ও ব্যাংক এর লিখিত পরীক্ষা ...+এছাড়া মাধ্যমিক ও উচ্চমাধ্যমিকের স্টুডেন্টদের জন্য অনেক কাজে আসবে ...
How to Add Chatter in the odoo 17 ERP ModuleCeline George
In Odoo, the chatter is like a chat tool that helps you work together on records. You can leave notes and track things, making it easier to talk with your team and partners. Inside chatter, all communication history, activity, and changes will be displayed.
For more course tutorials visit
www.newtonhelp.com
Data-Driven Decision Making Using Microsoft Excel
This assignment must be completed and submitted using a Microsoft Excel spreadsheet (.xls). Provide a source for each equation you use. Sources must be listed at the bottom of the spreadsheet. No title page or additional formatting is required.
This document provides instructions for a final project management report assignment. The report must educate new management at a company recently purchased by Roto Air on the benefits of project management. It must define key project management concepts, explain benefits, and make recommendations. Specifically, it outlines 15 topics that must be addressed in the 3,500-4,500 word APA formatted report, including defining projects, benefits of various tools and methods, and the importance of risk management and data-driven decision making. Sources and headings are required.
The document provides details for an assignment involving data-driven decision making using Microsoft Excel for a project at Roto Air. It includes instructions to calculate channels of communication for different team sizes, benefit-cost ratios for two potential projects, payback periods, and net present value. It also describes a scenario for using Smartsheet project management software to plan the Quick Drop 100 transition project. Key calculations and decisions include determining which project has a higher benefit-cost ratio and shorter payback period based on numerical analyses.
For more course tutorials visit
www.newtonhelp.com
Case Study 1 (Part A)
Analyze the impact of business transactions on accounts; record (journalize and post) transactions in the books;
Cmgt 410 cmgt410 cmgt 410 education for service uopstudy.comUOPCourseHelp
The document provides instructions for several assignments for a project management course (CMGT 410). It discusses choosing a project methodology, developing various project documents like a project plan, scope statement, work breakdown structure (WBS), cost model, and risk register. Students are asked to apply concepts from the course to a case study scenario about developing a wellness app for a company. They must select an appropriate methodology, create project documents, track costs and risks, and recommend management strategies.
The objective of this assignment is to encourage the students to.docxdennisa15
The objective of this assignment is to encourage the students to use excel spreadsheets to aid in problem solving. Students are asked to solve a capital budgeting problem using an excel spreadsheet.
Format: The assignment is a problem solving exercise using an excel spreadsheet with additional discussion on findings considering both quantitative measures and qualitative issues.
Documents: Students should submit the following documents IN HARD COPY SUBMISSION:
· an assignment COVER sheet
· a copy of the FORMAL report
· a copy of the EXCEL spreadsheet displaying VALUES
· a copy of the EXCEL spreadsheet displaying excel FORMULAS
Online Submission: Link and details will be available on Canvas.
For online submission on Canvas via Turnitin, submit ONLY ONE FILE including
ONLY
the
Assignment
Cover
Page
along
with
the
copy
of
Formal
Report
.
Details of Assignment
Assume that you are an adviser at HITECH Ltd, which is analysing the introduction of a new game console named NEUROFORCE. This system can be connected with human brain functions and still very much controversial for claimed but yet to be confirmed adverse impacts on human behaviour after prolonged application. Health conscious groups are also lobbying against introduction of such games with probable detrimental effects.
The project manager of HITECH Ltd needs a detail analysis on this exciting NEUROFORCE project. She comes into your office, drops a consultant’s report on your desk, and complains, “We paid these consultants $1 million for this report, and I am not sure their financial analysis makes sense, though their estimations seem to be correct. Before we spend $30 million on
buying new equipment needed for this project, look it over and give me your opinion.” You open the report and find the following information and estimates:
The project will continue for next 7 years, by that time more reliable information on possible adverse impacts of using NEUROFORCE will be available. It is projected that equipment will have economic life of 10 years. After buying the equipment, it requires to renovate the production bay at HITECH Ltd and install the equipment at a total cost of $1 million. These renovation and installation costs are to be considered as capital expenditures. Staff training cost of $100,000 is to be incurred initially at the start of the project.
The equipment will be procured from SWEDEN and HITECH Ltd has to pay 8% import duty on purchase price, whereas the supplier will pay transportation costs of $70,000. These property, plant and equipment (PPE) would be depreciated over its useful life of 10 years using a tax allowable straight-line rate of 10%. However, the company is planning to sell the equipment at the end of the project for an estimated price of $6 million.
Consultants estimate that 48,000 NEUROFORCE consoles can be sold in the first year with an expected increase by 25% in each year for next two years; afterwards sales are expected to decr.
Page 1 of 7 Fin516 201830 Assessment 2 Value 30.docxkarlhennesey
Page 1 of 7
Fin516 201830 Assessment 2
Value: 30%
Due date: 17-April-2018
Submission method options: Turitin
Task – Answer all questions.
Question 1 45 marks
Corning Limited, one of the leading glass producers, is currently evaluating a potential new
product; a tough but light curved glass designed for unusually shaped tall buildings and office
blocks. The new product would cost more than their usual commercial exterior glasses and in
market research conducted by the company’s research department at a cost of $650,000 it
was judged superior to various competing products. Monica Andrews, the Chief Financial
Officer, must analyse this project, along with other potential investments, and then present
her findings to the company’s executive committee.
The project will require construction of a new plant that would have an annual capacity of
75,000 tons and will cost an estimated $18,500,000 to build. The estimated purchase cost of
machinery is $13,500,000 but shipping costs to move the machinery to the plant would total
$425,000 and the estimated installation charge is another $575,000.The land on which the
plant will be built has been vacant since it was bought three years ago at a cost of $750,000,
which has already been paid and expensed for tax purposes.
The company expects its new plant to produce 65,000 tons of glass per year and the
management of Corning anticipates they can sell the product at $350 per ton allowing the
company to gain 10% market share in the first year of operation. Fixed costs are expected to
average $12,500,000 annually while variable costs are estimated to be around $125 per ton.
The plant and machinery will be depreciated to zero on a straight-line basis over ten years,
with an estimated sale value of $1,000,000 after 10 years at the end of the project.
Corning requires 11.5% return on the project. The company tax rate is 30%.
Now assume that you are an assistant to Monica and she has asked you to analyse the project
and then to present your findings to her. Therefore,
a. Calculate the project’s incremental cash flow for each year and present in a tabular form.
15 marks
b. Using the incremental cash flows calculate the project’s:
i. Payback Period 1.5 marks
ii. Net Present Value 5 marks
iii. Profitability Index 2 marks
iv. Discounted Payback Period 1.5 marks
v. Internal Rate of Return using interpolation method 7 marks
c. Identify and discuss any further information that you may requ ...
The document provides specifications for developing a website for Global Toys, a large toy shop. The key points are:
1. The website needs to provide information on the shop layout and selection of toys. Images and details are provided in a ZIP file including toy images and descriptions.
2. Requirements include displaying the shop logo on each page, using the provided toy images and names, and generating a page with the business hours.
3. Users should be able to view toy images and get more details by clicking. Clicking on sections of the floor plan should show the toys in that area.
4. The assessment involves developing mockups, adding images and navigation, designing pages for hours and contact
BA 620 Managerial Finance Group Problem Set 2 (125 poi.docxrosemaryralphs52525
BA 620 Managerial Finance
Group Problem Set 2 (125 points)
This problem Set is based on materials covered in modules 5, 6, and 7. It is designed
for you to demonstrate your understanding and be able to apply basic capital budgeting
concepts, working capital management, dividend policy, and international financial
management.
Part 1: Capital Budgeting Analysis
Adams, Incorporated would like to add a new line of business to its existing retail
business. The new line of business will be the manufacturing and distribution of animal
feeds. This is a major capital project. Adams, Incorporated is aware you an in an MBA
program and would like you to help analysis the viability of this major business venture
based on the following information:
• The production line would be set up in an empty lot the company owns.
• The machinery’s invoice price would be approximately $200,000, another
$10,000 in shipping charges would be required, and it would cost an additional
$30,000 to install the equipment.
• The machinery has useful life of 4 years, and it is a MACRS 3-year asset.
• The machinery is expected to have a salvage value of $25,000 after 4 years of
use.
• This new line of business will generate incremental sales of 1,250 units per year
for 4 years at an incremental cost of $100 per unit in the first year, excluding
depreciation. Each unit can be sold for $200 in the first year. The sales price
and cost are expected to increase by 3% per year due to inflation.
• Net working capital would have to increase by an amount equal to 12% of sales
revenues. The firm’s tax rate is 40%, and its overall weighted average cost of
capital is 10%.
Required:
1. If the company spent $40,000 last year in the upkeep of the empty lot, should this
cost be included in the analysis? Why or why not?
2. Disregard the assumptions in part 1 above. What is the machinery’s depreciable
basis? What are the annual depreciation expenses?
3. Calculate the annual sales revenues and costs (other than depreciation).
4. Construct annual incremental operating cash flow statements.
5. Estimate the required net working capital for each year based on sales for the
following year. Working capital will be recovered at the end of year 4.
6. Calculate the after-tax salvage cash flow.
7. Calculate the net cash flows for each year. Based on these cash flows, what are
the project’s NPV, IRR, Profitability Index (PI), and payback?
8. Can you use the Payback method to decide whether this is a good project or
not? Why or why not?
9. Interpret what NPV, IRR, and Profitability Index (PI) mean. Based on your
interpretation, do these indicators suggest the new business line should be
undertaken?
Part 2: Working Capital Management
1. Adams Stores, Inc. is trying to determine the effect of its inventory turnover ratio and days
sales outstanding (DSO) on its cash flow cycle. Adams’ sales last year (.
BA 620 Managerial Finance Group Problem Set 2 (125 poi.docxwilcockiris
This document outlines a communication plan for a project aimed at preventing pressure injuries in critical care patients. The plan identifies stakeholders, including nursing staff, and discusses various communication methods like meetings, presentations, and an online forum. Effective communication is emphasized as critical for project success. The initial team meetings are identified as important for building rapport and trust through introductions and discussing the project background and goals. Biweekly meetings of Skin and Wound Assessment Nurses are also included for ongoing discussion, feedback, and addressing barriers. An online collaborative site will facilitate information sharing among the different hospital units and staff schedules.
Similar to BUS 611 MART Education Counseling / bus611mart.com (11)
हिंदी वर्णमाला पीपीटी, hindi alphabet PPT presentation, hindi varnamala PPT, Hindi Varnamala pdf, हिंदी स्वर, हिंदी व्यंजन, sikhiye hindi varnmala, dr. mulla adam ali, hindi language and literature, hindi alphabet with drawing, hindi alphabet pdf, hindi varnamala for childrens, hindi language, hindi varnamala practice for kids, https://www.drmullaadamali.com
Reimagining Your Library Space: How to Increase the Vibes in Your Library No ...Diana Rendina
Librarians are leading the way in creating future-ready citizens – now we need to update our spaces to match. In this session, attendees will get inspiration for transforming their library spaces. You’ll learn how to survey students and patrons, create a focus group, and use design thinking to brainstorm ideas for your space. We’ll discuss budget friendly ways to change your space as well as how to find funding. No matter where you’re at, you’ll find ideas for reimagining your space in this session.
How to Make a Field Mandatory in Odoo 17Celine George
In Odoo, making a field required can be done through both Python code and XML views. When you set the required attribute to True in Python code, it makes the field required across all views where it's used. Conversely, when you set the required attribute in XML views, it makes the field required only in the context of that particular view.
বাংলাদেশের অর্থনৈতিক সমীক্ষা ২০২৪ [Bangladesh Economic Review 2024 Bangla.pdf] কম্পিউটার , ট্যাব ও স্মার্ট ফোন ভার্সন সহ সম্পূর্ণ বাংলা ই-বুক বা pdf বই " সুচিপত্র ...বুকমার্ক মেনু 🔖 ও হাইপার লিংক মেনু 📝👆 যুক্ত ..
আমাদের সবার জন্য খুব খুব গুরুত্বপূর্ণ একটি বই ..বিসিএস, ব্যাংক, ইউনিভার্সিটি ভর্তি ও যে কোন প্রতিযোগিতা মূলক পরীক্ষার জন্য এর খুব ইম্পরট্যান্ট একটি বিষয় ...তাছাড়া বাংলাদেশের সাম্প্রতিক যে কোন ডাটা বা তথ্য এই বইতে পাবেন ...
তাই একজন নাগরিক হিসাবে এই তথ্য গুলো আপনার জানা প্রয়োজন ...।
বিসিএস ও ব্যাংক এর লিখিত পরীক্ষা ...+এছাড়া মাধ্যমিক ও উচ্চমাধ্যমিকের স্টুডেন্টদের জন্য অনেক কাজে আসবে ...
How to Add Chatter in the odoo 17 ERP ModuleCeline George
In Odoo, the chatter is like a chat tool that helps you work together on records. You can leave notes and track things, making it easier to talk with your team and partners. Inside chatter, all communication history, activity, and changes will be displayed.
A review of the growth of the Israel Genealogy Research Association Database Collection for the last 12 months. Our collection is now passed the 3 million mark and still growing. See which archives have contributed the most. See the different types of records we have, and which years have had records added. You can also see what we have for the future.
This presentation was provided by Steph Pollock of The American Psychological Association’s Journals Program, and Damita Snow, of The American Society of Civil Engineers (ASCE), for the initial session of NISO's 2024 Training Series "DEIA in the Scholarly Landscape." Session One: 'Setting Expectations: a DEIA Primer,' was held June 6, 2024.
This document provides an overview of wound healing, its functions, stages, mechanisms, factors affecting it, and complications.
A wound is a break in the integrity of the skin or tissues, which may be associated with disruption of the structure and function.
Healing is the body’s response to injury in an attempt to restore normal structure and functions.
Healing can occur in two ways: Regeneration and Repair
There are 4 phases of wound healing: hemostasis, inflammation, proliferation, and remodeling. This document also describes the mechanism of wound healing. Factors that affect healing include infection, uncontrolled diabetes, poor nutrition, age, anemia, the presence of foreign bodies, etc.
Complications of wound healing like infection, hyperpigmentation of scar, contractures, and keloid formation.
This slide is special for master students (MIBS & MIFB) in UUM. Also useful for readers who are interested in the topic of contemporary Islamic banking.
This presentation includes basic of PCOS their pathology and treatment and also Ayurveda correlation of PCOS and Ayurvedic line of treatment mentioned in classics.
BUS 611 MART Education Counseling / bus611mart.com
1. BUS 611 Assignment Data Driven Decision Making Using
Microsoft Excel (Roto Air)
FOR MORE CLASSES VISIT
www.bus611mart.com
Data-Driven Decision Making Using Microsoft Excel This assignment
must be completed and submitted using a Microsoft Excel
spreadsheet (.xls). Provide a source for each equation you use.
Sources must be listed at the bottom of the spreadsheet. No title
page or additional formatting is required. 1. Channels of
Communication o It has been estimated that project managers spend
up to 90% of their time communicating and your position at Roto Air
is typical. Calculate the number of possible channels of
communication if the project team were to grow to nine members,
Important: show your work. o The total number of stakeholders,
including the project team, is estimated at 75 people. Calculate how
many more possible channels of communication the additional
stakeholders beyond the team members represent. Important: show
your work. 2. Benefit Cost Ratio (BCR) o Roto Air plans to spend
$1,000,000 on this project, resulting in a total savings of $2,500,000
over the life of the project. Calculate the Benefit Cost Ratio.
Important: show your work. Ignore any effects of the time value of
money. o Roto Air also considered another project that would have
partially satisfied their needs. It would have required a $750,000
investment and would result in a savings of $125,000 per year for 10
years. Calculate the Benefit Cost Ratio. Important: show your work.
Ignore any effects of the time value of money. o Comparing only the
BCRs, explain which project should Roto Air should have chosen.
2. Ignore any effects of the time value of money. 3. Payback Period o
Calculate the payback period for the $1,000,000 investment shown
above. Important: show your work. Ignore any effects of the time
value of money. o Calculate the payback period for the $750,000
investment shown above. Important: show your work. Ignore any
effects of the time value of money. o Comparing only on the payback
periods, explain which project should Roto Air have chosen. Ignore
any effects of the time value of money. 4. Net Present Value (NPV) o
Calculate the Net Present Value of Roto Air’s $1,000,000 investment
with a $250,000 annual savings for 10 years when the interest rate
averages 3% annually. Important: show your work.
==============================================
BUS 611 Assignment Project Management Software (Roto
Air)
FOR MORE CLASSES VISIT
www.bus611mart.com
Project Management Software Scenario Roto Air has decided to use
Smartsheet as the software for project management and
collaboration. The Quick Drop 100 Transition team will be the first to
use it. You will enter into a self-teaching exercise based on selected
project information that will be provided to you. In preparation you
will need to navigate to smartsheet.com and create a free trial
account good for 30 days. Assignment: Project Management
Software This is a learning exercise using data provided to you.
Please do not enter different or additional data. The software is user
friendly and quite intuitive. Complete the following steps: 1. Navigate
to smartsheet.com. 2. Login using your email address and individual
3. password. 3. Using the Create New tab at the upper left, open a New
Project Sheet. 4. Save the sheet as Quick Drop 100 Transition and
your last name. 5. Under Task Name for row 1, enter Kickoff Meeting.
Note: Rolling over the icons in the left hand column under Home
reveals the function of the button. Find and hit the Wrap button to
display the full text of any entry. 6. Enter 1 in Duration. (Durations
have been set to display days). 7. Enter today’s date under Start. 8.
Enter your first name under Assigned To. Note: Depending on your
view, you may have to slide the right side vertical border of the
Predecessors column to the right to view the Assigned To column. 9.
Enter Order Long Lead Items as Task Name 2. Then enter
Predecessors 1. 10. Enter Write Specifications for Rotor Forming
Machine as Task Name 3. Hit the Indent Right icon. Then enter
Duration 2, Predecessors 1, Assigned To Jackie. 11. Enter Send
Requests for Proposals as Task Name 4. Then enter Duration 1,
Predecessors 3, Assigned To Jackie. 12. Enter Evaluate Proposals as
Task Name 5. Then enter Duration 1, Predecessors 4, Assigned To
Your First Name. 13. Enter Forward Purchase Requisition to
Purchasing as Task Name 6. Then enter Duration 1, Predecessors 5,
Assigned To Jackie. 14. Enter Write Product Assembly Manual as Task
Name 7. Then enter Duration 12, Predecessors 1. Hit the Indent Left
icon. 15. Enter Gather Engineering Specifications as Task Name 8. Hit
the Indent Right icon. Then enter Duration 2, Assigned To John. 16.
Enter Write Mechanical Instructions as Task Name 9. Then enter
Duration 5, Predecessors 8, Assigned To John. 17. Enter Write
Electrical Instructions as Task Name 10. Then enter Duration 4,
Predecessors 8, Assigned To Jose. 18. Enter Write Test Instructions as
Task Name 11. Then enter Duration 4, Predecessors 9, 10, Assigned
To Shawn. 19. Enter Release Manual For Reproduction as Task Name
12. Then enter Duration 1, Predecessors 11, Assigned To John. If all
went well you will have an indented Work Breakdown Schedule
4. (WBS), task durations, task start and finish dates, a list of owners and
a Gantt chart showing a clear visual display of your project.
Congratulations on your first use of a powerful new tool! Hint: Your
data was entered correctly if the Duration on line 2 is 5 and on line 7
is 12. These values are calculated by the software and cannot be
entered manually.
==============================================
BUS 611 Week 1 Assignment Manufacture Location
Transition (Roto Air)
FOR MORE CLASSES VISIT
www.bus611mart.com
Scenario: Roto Air You will be working with the following scenario
throughout this course. You are free to make reasonable assumptions
when facts have not been provided, but do state them as you
complete the assignments. You are a project manager for Roto Air,
Inc., a successful manufacturer of autonomous rotorcraft (drone
helicopters) headed by CEO Jackie Copperfield. You work at the
research and development facility in central New York and have been
given the assignment of transitioning the manufacturing processes
for the newest product, the Quick Drop 100, to its permanent
manufacturing site in central Florida. The Florida plant is non-union,
has lower property taxes, and lower utility costs than the New York
location. You will be sharing an existing building owned by Roto Air
and used for assembly of other similar products. While floor space
has been allocated for your product, the specialized machinery and
tools must be procured. One of these machines is to be custom built
and has a lead time of 5 months. Normal support functions such as
5. human resources, facility maintenance, and manufacturing
engineering are already available in Florida. A manual with the
product assembly instructions and specifications is needed for
training the new manufacturing technicians and will remain your
responsibility to complete. An appropriate budget of $1M has been
approved for first year transition costs. Annual savings from the
move are expected to be $250,000 per year. The budget is controlled
by John Golden, plant manager in Florida. Manufacturing is
scheduled to start in the new location six months from today. You
have a well-qualified team of four other employees that are free to
travel as needed from their New York home to Florida. Although the
team members have worked on many projects, they have not worked
together before. Team members are Jackie, Ken, Jose, and Shawn.
Upon successful transition you will return to your responsibilities in
New York. Assignment: This week you will complete the project
charter. Various publications and organizations have differing
contents for a charter; however you will be working with the outline
preferred by Roto Air. Using the information provided, complete the
steps below. Compose a business case for transitioning the product to
Florida. Prepare a scope statement for the transition project. Identify
the most logical project sponsor and justify your choice with at least
two supporting reasons. Identify the top level project schedule.
Identify the overall budget. Specifies at least one state or national
safety standard that the manufacturing operation must comply with
and explain the reason for its selection. Your paper must be 900 to
1200 words in length (not including title and reference pages) and
must be formatted according to APA style as outlined in the approved
APA style guide. Contextual (Level One) headings must be used to
organize your paper and your thoughts. You must cite at least two
scholarly sources from the Ashford Online Library in addition to the
6. textbook. Carefully review the Grading Rubric for the criteria that will
be used to evaluate your assignment.
==============================================
BUS 611 Week 2 Assignment Project Kickoff Meeting
FOR MORE CLASSES VISIT
www.bus611mart.com
Project Kick-off Meeting [CLOs: 2,3]. Due by Day 7. Note that we are
continuing with our scenario from Week One. This week you travel to
the Roto Air plant in Florida to hold the project kick-off meeting. In
preparation for the meeting: a. Identify at least three categories of
stakeholders that should be invited. b. Remembering that interested
parties are in both New York and Florida: i. Select three methods of
communicating with the attendees. ii. Describe the best method of
holding the meeting that also limits travel costs. c. Describe at least
three team building exercises that could be used during the meeting.
d. Before leaving the office, Shawn mentions that her husband is
employed as a sales representative by the manufacturer of one of the
needed machines. i. After reviewing the Project Management
Institute’s (PMI) Code of Conduct, specify which potential violation
exists. ii. As the team leader, describe how you expect Shawn to
proceed regarding this issue. iii. Explain what action you would
recommend to Shawn’s husband. The paper • Must be 900 to 1200
words in length, double-spaced (not including title and references
pages) and formatted according to APA style as outlined in the
Ashford Writing Center. • Contextual (Level One) headings must be
used to organize your paper and thoughts. • Must include a separate
title page with the following: o Title of paper 17 BUS611 Project
7. Planning and Management COURSE GUIDE o Student’s name o
Course name and number o Instructor’s name o Date submitted •
Must use at least two scholarly sources from the Ashford Online
Library in addition to the course text. • Must document all sources in
APA style as outlined in the Ashford Writing Center. • Must include a
separate references page that is formatted according to APA style as
outlined in the Ashford Writing Center.
==============================================
BUS 611 Week 4 Assignment Risk Status Report and Paper
FOR MORE CLASSES VISIT
www.bus611mart.com
isk Status Report and Paper [CLOs: 5, 6] Scenario The Quick Drop 100
transition team has met to identify project risks, explore contingency
plans, and assign owners to watch for symptoms and address the
risks. The team surfaced the following information: Julie is scheduled
for a one week vacation during month three of the project. The
supplier of a common set of hand tools for the manufacturing floor
notified the Roto Air Purchasing department that the tools will not be
available until one month after manufacturing is scheduled to start.
Alternative suppliers are available. The Human Resources
department has indicated that despite their best recruiting efforts the
two openings for skilled welders have resulted in no qualified local
applicants. The manufacturer of the custom-built rotor forming
machine now expects to be one month past the last acceptable date
for installing the machine. No other suppliers exist for this item. Roto
Air uses a Just In Time (JIT) delivery system for major components
used at the Florida plant. Hurricane season often interrupts or delays
8. deliveries during one of the scheduled months of the project.
Assignment Instructions This week you will be essentially doing two
related assignment in one MS Word document. The first part is a
status report. The second part is an academic paper. Part 1 Status
Report: Prepare a simple status report for senior management by
creating a table within a MS Word. For each of the five risks:
Determine if each risk should be classified as low, medium, or high
based on its impact to the project. Differentiate the risk
classifications in the table using green, yellow, and red shading to
produce a status report that immediately signals the severity of the
impact without reading the details. Describe one plausible risk
response for each of the risks. Identify a team member to be
responsible for monitoring each risk. Part 2 Academic Paper: Write a
paper that reviews the risks and explains the options a project
manager has available to lessen the effects of risk. These include
acceptance, avoidance, control (mitigation), and transfer. Your paper
must be 900 to 1,200 words in length (not including title and
reference pages) and must be formatted according to APA style as
outlined in the approved APA style guide. Contextual (Level One)
headings must be used to organize your paper and your thoughts.
You must cite at least two scholarly sources from the Ashford Online
Library, in addition to the textbook. Carefully review the Grading
Rubric for the criteria that will be used to evaluate your assignment.
==============================================
BUS 611 Week 6 Final Paper Selling Project Management
Report (Roto Air)
FOR MORE CLASSES VISIT
www.bus611mart.com
9. Week 6 ¬ Final Paper Selling Project Management Report Your new
knowledge of project management and experience at Roto Air has
earned you a promotion to a senior project manager. Roto Air has
recently purchased a smaller company that is the current supplier of
electro¬mechanical assemblies used in the Quick Drop 100. After your
first visit to the new company you find that there is no formal project
management system in use and that local management is not aware
of the advantages of using project management principles. Your
assignment is to educate the new management team and prepare
them to welcome and integrate project management skills and tools
into their operations. To do so, you will prepare a persuasive, factual
report that: 1. Defines a project and project management and
differentiates routine operations. 2. Explains the benefits to the
business of using project management methodology. 3. Describes the
role and importance of a project sponsor. 4. Examines the benefits of
using project teams and methods of developing them and improving
communications. 5. Outlines the project life cycle. 6. Examines the
importance of a project charter and its role in preventing scope creep.
7. Justifies the need for using a Work Breakdown Structure (WBS). 8.
Explains the importance of holding a kick off meeting. 9. Summarizes
the benefits and uses of project management software. 10. Examines
the benefits of professional certification and the role of ethics in
project management. 11. Describes the importance of identifying and
mitigating risk in projects. 12. Relates and gives examples of data
driven decision making. 13. Recommends whether a PMO is needed.
14. Discusses the role of collecting and publicizing lessons learned.
15. Summarize your recommendations. Your paper must be 3500 to
4500 words in length (not including title and reference pages) and
10. must be formatted according to APA style as outlined in the approved
APA style guide. Contextual (Level One)
==============================================