1) The Rusch group specializes in repairing crane structures up to 1100 N/mm steel quality, including mobile cranes, tower cranes, lattice boom cranes, excavators, access platforms, and piling machines. 2) Rusch Special Products designs custom demolition machines based on excavators, including the Triple with booms reaching 34 meters and carrying tools up to 25 tons, built on modified 80-180 ton excavators using high strength 960 N/mm2 steel. 3) Safety features of the Triple include multiple cameras, pressure sensors, angle indicators, and automatic stopping if danger levels for movement are exceeded.

1. TRIPLE
Bezoekadres De Factorij 24
1689 AL Zwaag
34
The Netherlands
Postadres Postbus 4128
25
1620 HC Hoorn
The Netherlands
Tel. +31 (0)229 212698
Fax. +31 (0)229 211439
Website www.rusch.to WWW.Rusch.To
E-mail Rusch@special-products.eu a hIghER LEvEL

2. 24 22 20 18 16 14 12 10 8 6 4 2
42
40
38
36
34
32
30
28
26
24
22
20
18
16
1 : 2 Line
WORkiNg-RANgE diAgRAm
14 TRiPLE WiTh 25-TON TOOL.
Rated tipping load: 75% of the static tipping load
12
(ISO 10567). Totall mass 330 ton.
10
8
6
240°
4
120°
2
24 22 20 18 16 14 12 10 8 6 4 2 0 2 4 6 8 10 12 14 16
Tipping line
The Rusch group is specialized in repair of crane structures Rusch Special Products bv designs custom build Demolition SAFETY
up to a steel quality of 1100 N/mm. Although mobile cranes Machines based in the strong body of excavators. In this brochure The machine is equipped with 4 camera’s. Two on the back of
form the hart of the repair jobs, Rusch is not limited to this you find the strongest demolition rig at this moment. The use of the machine, one at the fore boom for an overview and one with
particular type of crane. Over the years Tower cranes, Lat- high tensile steel up to a yield strength of 960 N/mm2 enables zoom option at the main stick. The system consists off hydraulic
tice boom crawler cranes, Excavators, Access platforms Rusch to go to extreme heights or extreme strengths. The Triple pressure sensors, angle indicators, inclination indicator and wind
and Piling machines have been part of the work. range consists of cranes with a reach of 34 meter height and a speed indicator. All information is put into the iFlex PLC box that
tool weight of 10, 15 or 25T tools build on modified 80T, 110T controls all functions. All pressures of the hydraulical system can
and 180T excavators. Each machine will be modified in length, be seen, all angles of the boom and sticks and the complete
width and ballast weight and executed with a high tensile steel configuration of the boom. When approaching a dangerous si-
boom of three pieces. Calculations of both the existing excavator tuation an orange lamp will indicate 90% danger level reached.
as the modifications / new parts is done in house. When 100% is reached the movement will stop and a red light
will come on. The machine can only go back to a safe position
before continuing.

3. TRANSPORT INFORMATION
This crane is not designed for easy as-
sembly. All parts can be shipped by road
transport by means of 12 low loaders.
The machine is designed for a dedicated
work over many years on one location.
An easier assembly concept can be de-
signed on demand

4. The cabin is equiped with a tilting cab till 40 degrees, enabling
the driver to have a good view at the work.
Safety glass of 30 mm is applied together with a safe guard at the
top and the front window.
The cabin is spacious with besides the driver seat an extra seat
for instructor or trainee.
Handles and controls are put in an ergonomic way for comfort
of the driver.
The mainframe is re-enforced with a subframe. The existing ex- hinge point of the boom and to strengthen the mainframe for the
cavator is recalculated if it can take the forces of a 25T tool at new boom a subframe is connected to the old main frame. In
34 meter. This is done by the latest strength calculation software case the excavators needs to work with the original boom, this
available. All weak spots are strengthened and to relocate the subframe can be removed and the old situation is restored
The cabin is located at a height of 6 meters from ground level
giving a good view on the job.
5
10
9
7
11
13
7
12
6 13
4
3 14 6
14 1 Zoom Camera Control -
14 13 1 Zoom Camera Monitor -
12
12 2 Joystick 1 Zoom Camera Control
14 - -
11 1 Foot Rest 1 Zoom Camera Monitor
13 - -
2 10 1 Foot Pedal2+ Stick
12 Joystick - -
11 1 Foot Rest -
9 1 Foot Pedal + Stick -
10 1 Foot Pedal + Stick -
8 8 1 Seatbelt part 1 - -
9 1 Foot Pedal + Stick
7 1 Camera Monitor
8 1 Seatbelt part 1 - -
6 1 I-Flex 7
Monitor Camera Monitor
1 - -
1 5 1 Foot Pedal1 I-Flex Monitor
6
Steel
-
5 1 Foot Pedal Steel
4 1 Turn Switch -
4 1 Turn Switch -
3 1 Contact 1 Contact
3 Steel Steel
2 1 Emergency button
2 1 Emergency button - -
1 1 Chair 1 1 Chair - -
Pos Qty
Pos Qty Description Description Size Size Material
Material Comments
Comments