Brochure containing specs, techn drawnings and working diagrams

1. Tuhd
90
WWW.Rusch.To
a higheR level

2. 90 90
80 80
70 70
60 60
50 50
40 40
30 30
20 20
81 5 °
8
°
81 5°
8
66 5°
°
7
°
66 5°
7
°
10 10
40 30 20 10 40 30 20 10
Working-range diagram Working-range diagram
TUHd-90 WiTH 5-Ton. Tool TUHd-90 WiTH 10-Ton.Tool
Rated tipping load: 75% of the static tipping load (ISO 10567) Rated tipping load 75% of the static tipping load (ISO 10567)
Total mass 240 ton. Total mass 240 ton.
• Max. pressure in hydraulic
SaFeTY
system
The machine is equipped with 6 cameras. Two on the back of the • Working Height
machine, one at the fore boom for an over view, one at the auxili- • Radius
ary stick looking at the tool and two looking inside the telescopic • Angles
boom to see if everything goes right (see photo). The crane is also • Inclination of the machine
equipped with a safety system equivalent to a mobile crane. All • 90 and 100% warning light
pressures of the hydraulical system can be seen, all angles of the • Time
boom and sticks and the complete configuration of the boom. • Present program
When approaching a dangerous situation an orange lamp will
indicate 90% danger level reached. When 100% is reached the
movement will stop and a red light will come on. The machine can
only go back to a safe position before continuing. On the display A manual emergency system
(see photo) you can see: is available in case this system
should malfunction.

3. ThE TUhD-90 iS TrAnSpOrTED wiTh 7 LOw LOADErS.
This is divided in:
• Main body and Main booM cylinders
• counterweight of 28t
• counterweight 17t
• side beaMs and tools
• left track
• right track
• coMplete booM
The body is equipped with 4 cylinder to jack itself from the low
loader. In this position it is possible to connect the side beams
TUHD-90 Transportation module dimensions and tracks by means of a mobile crane. The cylinders are retracted
Description Max. Length Max. Height Max. Width Mass
(mm) (mm) (mm) (ton) and the crane is standing on the tracks. Now both the 28T and
Single track (total of 2) 9393 1655 1110 25.75 17T ballast blocks can be lifted in. The crane is now ready to take
Single track expansion (total of 2) 5410 1035 898 4
Chassis, carbody, topcylinders and cabin
the boom.
13530 4031 3933 66.3
Original counterweight 3485 2560 850 16.8
Extra counterweight 3507 2560 550 30 TOTAL MASS BOOM EX. TOOL: 70T