Saint-Gobain Abrasives, under its Norton brand has launched a new range of high performance wheels for cutting-off and grinding primarily for use in oil & gas, off-shore, energy, transportation, foundry, shipyard and metal fabrication markets. The new range, Norton Quantum, gives faster and more aggressive cutting and grinding.
Quantum X is created with patented Norton Quantum and Vortex2 3D engineered grain spacing, combined with the revolutionary Vitrium3 bond innovation; resulting in a grinding wheel that provides maximum performance, raised productivity and reduced process costs.
Norton introduces a new abrasive range for centerless coil and glass polishing. W448 is made from aggregate technology where cork and silicon carbide grains are precisely structured and engineered to size, to create a consistent surface finish with improved belt life.
Through research and development, Winter has created a new type of grinding wheel called CarbonForce. CarbonForce uses a lightweight carbon fiber reinforced polymer core, offering higher strength than steel but lower weight than aluminum. This provides a 75% weight reduction over steel-hubbed wheels. The lightweight wheels are easier for operators to handle and enable higher wheel speeds and productivity. They also improve surface finish, reduce costs, and increase machine life. CarbonForce is well-suited for applications like outer diameter grinding, centerless grinding, camshaft grinding, and gear grinding.
Norton lanseeraa uuden napalaikan, Quantum Fast Cut, jonka ansiosta hionta on huomattavasti nopeampaa ja käyttöikä 4-8 kertaa pidempi kuin perinteisillä napalaikoilla.
As rail track technology continues to make major advances, the requirement for abrasives in maintenance and repair operations is increasing. As a multi-solution provider, Saint-Gobain offers a number of abrasive products which comply with all European health, safety and environmental standards and are specially designed for cutting and grinding rail track and surrounding materials.
Uuden sukupolven akkukäyttöisissä kulmahiomakoneissa on uudentyyppinen ladattava akku, joka pidentää akun käyttöaikaa ja parantaa tehokkuutta. Nortonin uudet Norton Expert Accu –katkaisu- ja napalaikat on kehitetty maksimoimaan akun elinikä.
This document describes new cut-off wheels from Norton engineered for foundry environments. The wheels are designed to increase cut rates and durability on a wide range of materials. They cut costs by lasting longer, cutting faster, and reducing cycle times. The wheels efficiently cut cast iron, alloyed steels, and stainless steels. They feature new Foundry X bond technology and Norton grain to improve thermal stability and mechanical strength for better performance.
Saint-Gobain Abrasives, under the Norton brand, has introduced in the market a new range of cut-off wheels for use in Foundry environments. This latest generation of cut-off products has been developed with the new Foundry X bond technology, engineered to increase cut rate and wheel life in all foundry cut-off applications.
Quantum X is created with patented Norton Quantum and Vortex2 3D engineered grain spacing, combined with the revolutionary Vitrium3 bond innovation; resulting in a grinding wheel that provides maximum performance, raised productivity and reduced process costs.
Norton introduces a new abrasive range for centerless coil and glass polishing. W448 is made from aggregate technology where cork and silicon carbide grains are precisely structured and engineered to size, to create a consistent surface finish with improved belt life.
Through research and development, Winter has created a new type of grinding wheel called CarbonForce. CarbonForce uses a lightweight carbon fiber reinforced polymer core, offering higher strength than steel but lower weight than aluminum. This provides a 75% weight reduction over steel-hubbed wheels. The lightweight wheels are easier for operators to handle and enable higher wheel speeds and productivity. They also improve surface finish, reduce costs, and increase machine life. CarbonForce is well-suited for applications like outer diameter grinding, centerless grinding, camshaft grinding, and gear grinding.
Norton lanseeraa uuden napalaikan, Quantum Fast Cut, jonka ansiosta hionta on huomattavasti nopeampaa ja käyttöikä 4-8 kertaa pidempi kuin perinteisillä napalaikoilla.
As rail track technology continues to make major advances, the requirement for abrasives in maintenance and repair operations is increasing. As a multi-solution provider, Saint-Gobain offers a number of abrasive products which comply with all European health, safety and environmental standards and are specially designed for cutting and grinding rail track and surrounding materials.
Uuden sukupolven akkukäyttöisissä kulmahiomakoneissa on uudentyyppinen ladattava akku, joka pidentää akun käyttöaikaa ja parantaa tehokkuutta. Nortonin uudet Norton Expert Accu –katkaisu- ja napalaikat on kehitetty maksimoimaan akun elinikä.
This document describes new cut-off wheels from Norton engineered for foundry environments. The wheels are designed to increase cut rates and durability on a wide range of materials. They cut costs by lasting longer, cutting faster, and reducing cycle times. The wheels efficiently cut cast iron, alloyed steels, and stainless steels. They feature new Foundry X bond technology and Norton grain to improve thermal stability and mechanical strength for better performance.
Saint-Gobain Abrasives, under the Norton brand, has introduced in the market a new range of cut-off wheels for use in Foundry environments. This latest generation of cut-off products has been developed with the new Foundry X bond technology, engineered to increase cut rate and wheel life in all foundry cut-off applications.
Nortonin uudet FoundryX –katkaisulaikat valimoille takaavat paremman aineenpoiston ja niiden käyttöikä on pidempi. Katkaisulaikoilla, joissa on Norzon-hioma-ainetta, aineenpoisto voi tehostua 50%. FoundryX:ää käytetetään katkaistaessa valurautaa, ruostumatonta sekä runsas- ja matalaseosteista terästä.
Norton Blue Fire katkaisu- ja hiomalaikat on tarkoitettu metallitöihin, kuten esimerkiksi hitsaussaumojen tasoitukseen, pintakäsittelyyn, muotoiluun, katkaisuun ja ruosteen poistoon. Suorahiomakoneissa käytettävät katkaisulaikat ovat halkaisijaltaan 50, 63, 76 ja 100 mm. Kulmahiomakoneissa käytettävät laikat ovat 115 ja 125 mm.
Slipmaterialleverantören Norton lanserar en ny teknologi för keramiskt bundna slipskivor för precisionsslipning. Tack vare den nya teknologin, som har beteckningen Quantum X, får man slipskivor med bättre prestanda som ger lägre total slipkostnad per detalj.
Norton lanseeraa uuden teknologian tarkkuushiontaan keraamisilla hiomalaikoilla. Uuden Quantum X -teknologian ansiosta hiomalaikkojen suorituskyky on parempi ja hiotun yksityiskohdan kokonaiskustannus alempi.
Norton has developed a complete range of abrasives specifically designed for the manufacture and repair of upstream, midstream and downstream components, shipbuilding, oil rigs, pipelines, and petrochemical plants.
Norton Omega abrasive products provide exceptional cutting speed and stock removal for demanding metalworking applications. They work faster and last longer than standard abrasives, saving time and increasing productivity. Omega flap discs and cutting-off and grinding wheels offer a higher material removal rate and up to 30% longer product life compared to competitors. Internal tests show Omega performing better on stainless steel and carbon steel for cutting-off and grinding applications.
Flexovit lanseeraa uuden napalaikan Mega-Line MaXX Cutin, jonka käyttöikä on 4 – 8 kertaa pidempi kuin perinteisten napalaikkojen ja valmistajan mukaan se myös hioo huomattavasti nopeammin.
The new range of Norton BDX R842 flap discs from Saint-Gobain Abrasives offers technical performance for all metal removal, deburring, shaping and sharpening applications. The unique zirconium grain has self-sharpening properties with controlled grain fractures continuously producing sharp, new abrasive points.
Nortonin uusi katkaisu- ja napalaikkojen Quantum-valikoima on tarkoitettu ruostumattoman teräksen, hiiliteräksen ja metalliseosten katkaisuun ja hiontaan. Laikat ovat erittäin pitkäikäisiä ja katkaisevat nopeasti, mikä valmistajan mukaan tarjoaa suuremman tuottavuuden.
The Norton Clipper range of hand-held petrol saws features an electronic carburettor which eliminates the hassle of a choke and makes a stress-free start of the powerful 4kW/5,4HP engine. 4 models are available, in 300 or 350 mm blade diameter, and using standard fuel + oil mix or fitted with the first ever iLube® automatic lubrication system, which controls the mix of oil and fuel electronically.
Norton lancerer en serie nye skæreskiver specielt til anvendelse i støberier. De nye skæreskiver er baseret på et helt nyt bindemiddelssystem, FoundryX, som har flere fordele.
Norton har introducerat en ny teknologi som revolutionerar tillverkningen av diamantsegment. Den nya tillverkningsmetoden, som har beteckningen iHD, har fördelar som bl.a. längre livslängd, snabbare kapning och större möjlighet att tillverka segment i olika former.
Norton har introducerat en ny teknologi som revolutionerar tillverkningen av diamantsegment. Den nya tillverkningsmetoden, som har beteckningen iHD, har fördelar som bl.a. längre livslängd, snabbare kapning och större möjlighet att tillverka segment i olika former.
Norton har introducerat en ny teknologi som revolutionerar tillverkningen av diamantsegment. Den nya tillverkningsmetoden, som har beteckningen iHD, har fördelar som bl.a. längre livslängd, snabbare kapning och större möjlighet att tillverka segment i olika former.
Norton har introducerat en ny teknologi som revolutionerar tillverkningen av diamantsegment. Den nya tillverkningsmetoden, som har beteckningen iHD, har fördelar som bl.a. längre livslängd, snabbare kapning och större möjlighet att tillverka segment i olika former.
Norton har introducerat en ny teknologi som revolutionerar tillverkningen av diamantsegment. Den nya tillverkningsmetoden, som har beteckningen iHD, har fördelar som bl.a. längre livslängd, snabbare kapning och större möjlighet att tillverka segment i olika former.
Norton har introducerat en ny teknologi som revolutionerar tillverkningen av diamantsegment. Den nya tillverkningsmetoden, som har beteckningen iHD, har fördelar som bl.a. längre livslängd, snabbare kapning och större möjlighet att tillverka segment i olika former.
Norton har introducerat en ny teknologi som revolutionerar tillverkningen av diamantsegment. Den nya tillverkningsmetoden, som har beteckningen iHD, har fördelar som bl.a. längre livslängd, snabbare kapning och större möjlighet att tillverka segment i olika former.
Norton har introducerat en ny teknologi som revolutionerar tillverkningen av diamantsegment. Den nya tillverkningsmetoden, som har beteckningen iHD, har fördelar som bl.a. längre livslängd, snabbare kapning och större möjlighet att tillverka segment i olika former.
Norton har introducerat en ny teknologi som revolutionerar tillverkningen av diamantsegment. Den nya tillverkningsmetoden, som har beteckningen iHD, har fördelar som bl.a. längre livslängd, snabbare kapning och större möjlighet att tillverka segment i olika former.
The document describes a high precision electroplated grinding wheel called AEON designed for gear shaft groove grinding applications. AEON wheels have a single abrasive layer fixed to the core through electrochemical nickel deposition, providing high grit retention. The core can be re-plated with new abrasive grains multiple times, saving costs. AEON offers improved performance over competitor wheels, with a 50% increase in efficiency, lifetime, and number of re-platings possible. It achieves outstanding tool life, highest accuracy, and perfect profile stability throughout its lifetime within a precision of +/- 5 μm for maximum sized wheels weighing 250 kg.
Nortonin uudet FoundryX –katkaisulaikat valimoille takaavat paremman aineenpoiston ja niiden käyttöikä on pidempi. Katkaisulaikoilla, joissa on Norzon-hioma-ainetta, aineenpoisto voi tehostua 50%. FoundryX:ää käytetetään katkaistaessa valurautaa, ruostumatonta sekä runsas- ja matalaseosteista terästä.
Norton Blue Fire katkaisu- ja hiomalaikat on tarkoitettu metallitöihin, kuten esimerkiksi hitsaussaumojen tasoitukseen, pintakäsittelyyn, muotoiluun, katkaisuun ja ruosteen poistoon. Suorahiomakoneissa käytettävät katkaisulaikat ovat halkaisijaltaan 50, 63, 76 ja 100 mm. Kulmahiomakoneissa käytettävät laikat ovat 115 ja 125 mm.
Slipmaterialleverantören Norton lanserar en ny teknologi för keramiskt bundna slipskivor för precisionsslipning. Tack vare den nya teknologin, som har beteckningen Quantum X, får man slipskivor med bättre prestanda som ger lägre total slipkostnad per detalj.
Norton lanseeraa uuden teknologian tarkkuushiontaan keraamisilla hiomalaikoilla. Uuden Quantum X -teknologian ansiosta hiomalaikkojen suorituskyky on parempi ja hiotun yksityiskohdan kokonaiskustannus alempi.
Norton has developed a complete range of abrasives specifically designed for the manufacture and repair of upstream, midstream and downstream components, shipbuilding, oil rigs, pipelines, and petrochemical plants.
Norton Omega abrasive products provide exceptional cutting speed and stock removal for demanding metalworking applications. They work faster and last longer than standard abrasives, saving time and increasing productivity. Omega flap discs and cutting-off and grinding wheels offer a higher material removal rate and up to 30% longer product life compared to competitors. Internal tests show Omega performing better on stainless steel and carbon steel for cutting-off and grinding applications.
Flexovit lanseeraa uuden napalaikan Mega-Line MaXX Cutin, jonka käyttöikä on 4 – 8 kertaa pidempi kuin perinteisten napalaikkojen ja valmistajan mukaan se myös hioo huomattavasti nopeammin.
The new range of Norton BDX R842 flap discs from Saint-Gobain Abrasives offers technical performance for all metal removal, deburring, shaping and sharpening applications. The unique zirconium grain has self-sharpening properties with controlled grain fractures continuously producing sharp, new abrasive points.
Nortonin uusi katkaisu- ja napalaikkojen Quantum-valikoima on tarkoitettu ruostumattoman teräksen, hiiliteräksen ja metalliseosten katkaisuun ja hiontaan. Laikat ovat erittäin pitkäikäisiä ja katkaisevat nopeasti, mikä valmistajan mukaan tarjoaa suuremman tuottavuuden.
The Norton Clipper range of hand-held petrol saws features an electronic carburettor which eliminates the hassle of a choke and makes a stress-free start of the powerful 4kW/5,4HP engine. 4 models are available, in 300 or 350 mm blade diameter, and using standard fuel + oil mix or fitted with the first ever iLube® automatic lubrication system, which controls the mix of oil and fuel electronically.
Norton lancerer en serie nye skæreskiver specielt til anvendelse i støberier. De nye skæreskiver er baseret på et helt nyt bindemiddelssystem, FoundryX, som har flere fordele.
Norton har introducerat en ny teknologi som revolutionerar tillverkningen av diamantsegment. Den nya tillverkningsmetoden, som har beteckningen iHD, har fördelar som bl.a. längre livslängd, snabbare kapning och större möjlighet att tillverka segment i olika former.
Norton har introducerat en ny teknologi som revolutionerar tillverkningen av diamantsegment. Den nya tillverkningsmetoden, som har beteckningen iHD, har fördelar som bl.a. längre livslängd, snabbare kapning och större möjlighet att tillverka segment i olika former.
Norton har introducerat en ny teknologi som revolutionerar tillverkningen av diamantsegment. Den nya tillverkningsmetoden, som har beteckningen iHD, har fördelar som bl.a. längre livslängd, snabbare kapning och större möjlighet att tillverka segment i olika former.
Norton har introducerat en ny teknologi som revolutionerar tillverkningen av diamantsegment. Den nya tillverkningsmetoden, som har beteckningen iHD, har fördelar som bl.a. längre livslängd, snabbare kapning och större möjlighet att tillverka segment i olika former.
Norton har introducerat en ny teknologi som revolutionerar tillverkningen av diamantsegment. Den nya tillverkningsmetoden, som har beteckningen iHD, har fördelar som bl.a. längre livslängd, snabbare kapning och större möjlighet att tillverka segment i olika former.
Norton har introducerat en ny teknologi som revolutionerar tillverkningen av diamantsegment. Den nya tillverkningsmetoden, som har beteckningen iHD, har fördelar som bl.a. längre livslängd, snabbare kapning och större möjlighet att tillverka segment i olika former.
Norton har introducerat en ny teknologi som revolutionerar tillverkningen av diamantsegment. Den nya tillverkningsmetoden, som har beteckningen iHD, har fördelar som bl.a. längre livslängd, snabbare kapning och större möjlighet att tillverka segment i olika former.
Norton har introducerat en ny teknologi som revolutionerar tillverkningen av diamantsegment. Den nya tillverkningsmetoden, som har beteckningen iHD, har fördelar som bl.a. längre livslängd, snabbare kapning och större möjlighet att tillverka segment i olika former.
Norton har introducerat en ny teknologi som revolutionerar tillverkningen av diamantsegment. Den nya tillverkningsmetoden, som har beteckningen iHD, har fördelar som bl.a. längre livslängd, snabbare kapning och större möjlighet att tillverka segment i olika former.
Similar to Brochure Norton Quantum grinding and cutting-off wheels (20)
The document describes a high precision electroplated grinding wheel called AEON designed for gear shaft groove grinding applications. AEON wheels have a single abrasive layer fixed to the core through electrochemical nickel deposition, providing high grit retention. The core can be re-plated with new abrasive grains multiple times, saving costs. AEON offers improved performance over competitor wheels, with a 50% increase in efficiency, lifetime, and number of re-platings possible. It achieves outstanding tool life, highest accuracy, and perfect profile stability throughout its lifetime within a precision of +/- 5 μm for maximum sized wheels weighing 250 kg.
The document describes Winter AEON electroplated grinding wheels designed for high precision gear shaft groove grinding applications. AEON wheels have a single abrasive layer fixed to the core through electrochemical nickel deposition, providing high grit retention. The core can be re-plated with new abrasive grains multiple times, reducing costs. AEON wheels offer a 50% increase in efficiency and lifetime compared to previous solutions. They achieve outstanding tool life, highest accuracy, and perfect profile stability throughout their lifetime.
The document describes Winter AEON electroplated grinding wheels designed for high precision gear shaft groove grinding applications. AEON wheels have a single abrasive layer fixed to the core through electrochemical nickel deposition, providing high grit retention. The core can be re-plated with new abrasive grains multiple times, reducing costs. Testing showed the new AEON wheel specification achieved 56,000 parts, a significant increase over previous Winter and competitor wheel specifications. AEON wheels are customized for each customer and designed to deliver the highest performance through improved wear resistance, tool life, accuracy, and profile stability.
The document describes Winter AEON electroplated grinding wheels designed for high precision gear shaft groove grinding applications. AEON wheels have a single abrasive layer fixed to the core through electrochemical nickel deposition, providing high grit retention. The core can be re-plated with new abrasive grains multiple times, reducing costs. Testing showed AEON wheels achieved 56,000 parts before replacement, a 50% improvement over previous wheels. AEON wheels offer customized solutions optimized for customers' processes, with improvements to efficiency, lifetime, and precision profile stability.
Norton Cyclonic is a new concept with a complete system of products colour coded by application steps for quick and easy selection in a busy body shop.
The document describes Norton's Cyclonic sanding system, which consists of four color-coded sanding steps to efficiently achieve a perfect surface finish. The Cyclonic system uses laser-cut discs and rolls that are flatter for closer sanding and improved dust extraction. The color-coding and included accessories provide a simple solution for consistent sanding results.
Norton Cyclonic is a new concept with a complete system of products colour coded by application steps for quick and easy selection in a busy body shop.
Norton Cyclonic is a new concept with a complete system of products colour coded by application steps for quick and easy selection in a busy body shop.
Norton Cyclonic is a new concept with a complete system of products colour coded by application steps for quick and easy selection in a busy body shop.
The document describes Norton's Cyclonic sanding system, which consists of four color-coded sanding steps to efficiently achieve a perfect surface finish. The Cyclonic system uses laser-cut discs and rolls that are flatter for closer sanding and improved dust extraction. The color-coding and included accessories provide a simple solution for consistent sanding results.
Norton Cyclonic is a new concept with a complete system of products colour coded by application steps for quick and easy selection in a busy body shop.
The document describes Norton's Cyclonic sanding system, which uses color-coded discs and rolls to simplify the sanding process. The system allows users to achieve a perfect surface finish in just four sanding steps. Norton's Cyclonic technology improves dust extraction by 25% compared to traditional sanding discs, increasing productivity. The laser-cut holes and specialized backing on the discs also provide more consistent sanding results.
Brochure Norton Quantum grinding and cutting-off wheels
1. Cutting-off &
grinding wheels
EXCEPTIONAL
CUTTING SPEED
Ultimate
STOCK REMOVAL
FOR THE
TOUGHEST JOBS
EXTREMELY
COMFORTABLE
The personal safety of workers using abrasive products is the primary concern of
Norton and Saint-Gobain Abrasives. All Norton Abrasives are developed, manufactured
and safety tested in accordance with the European standard FEPA “EN12413 - Safety
requirements for bonded abrasive products”. In addition, all Norton products meet the
strict requirements of the international safety organisation oSa. Saint-Gobain Abrasives
has an ISO 9001 certified quality system, an ISO 14001 certified environmental and an
OHSAS 18001 occupational health and safety management system.
Norton is a registered trademark of Saint-Gobain Abrasives.
Form # 2490
www.norton.eu
Saint-Gobain Abrasives
European Headquarters
Rue de l’Ambassadeur - B.P.8
F78702 Conflans-Saint-Honorine
France
Tel: +33 (0) 134 90 40 00
Fax: +33 (0) 139 19 89 56
CUTTING EDGE OF ABRASIVE TECHNOLOGYCUTTING-OFF WHEELS FOR STRAIGHT & PORTABLE GRINDERS
SIZE THICKNESSx HOLE SPECIFICATION MS QTY ORDER CODE
76 1,0 x 10,00 ZA60ZZ-BF41 80 5/50 66252840231
115
1,0 x 22,23 ZA60ZZ-BF41 80 25 66252836338
1,3 x 22,23 ZA60ZZ-BF41 80 25 66252836897
1,6 x 22,23 ZA46ZZ-BF41 80 25 66252836339
125
1,0 x 22,23 ZA60ZZ-BF41 80 25 66252836340
1,3 x 22,23 ZA60ZZ-BF41 80 25 66252836898
1,6 x 22,23 ZA46ZZ-BF41 80 25 66252836341
2,0 x 22,23 ZA46ZZ-BF41 80 25 66252843896
180 1,6 x 22,23 ZA46ZZ-BF41 80 25 66252837989
230 1,9 x 22,23 ZA46ZZ-BF41 80 25 66252837990
METAL INOXTYPE 41
SIZE THICKNESSx HOLE SPECIFICATION MS QTY ORDER CODE
115 0,8 x 22,23 ZA60ZZ-BF42 80 25 66252840228
125 0,8 x 22,23 ZA60ZZ-BF42 80 25 66252838243
TYPE 42
Scan this QR
code and see the
Quantum movie!
GRINDING WHEELS FOR PORTABLE GRINDERS - LONG LIFE
GRINDING WHEELS FOR PORTABLE GRINDERS - FAST CUT
SIZE THICKNESSx HOLE SPECIFICATION MS QTY ORDER CODE
115 7,0 x 22,23 ZA24R-BF27 80 10 66252842242
125 7,0 x 22,23 ZA24R-BF27 80 10 66252842243
180 7,0 x 22,23 ZA24T-BF27 80 10 66252842862
230 7,0 x 22,23 ZA24T-BF27 80 10 66252840382
SIZE THICKNESSx HOLE SPECIFICATION MS QTY ORDER CODE
115 7,0 x 22,23 A24P-BF27 80 10 66252844261
125 7,0 x 22,23 A24P-BF27 80 10 66252844262
180 7,0 x 22,23 A24P-BF27 80 10 66252844263
230 7,0 x 22,23 A24P-BF27 80 10 66252844264
TYPE 27
TYPE 27
METAL INOX
METAL INOX
90˚
METAL INOX
90˚
30˚
30˚
Advanced Innovation
2. RelativePerformance
LONG LIFE - GRINDING WHEELS
Quantum Long Life grinding wheels contain
a patented bond system designed to optimize your
output without costly tool changeover time. They
have extra reinforcement to ensure safe operating
on all rough heavy duty applications and are
compatible with High Frequency angle grinders.
Norton Long Life wheels are designed to optimize
tool changeover and lower the abrasive cost in any
industrial operation.
Relative Performance vs. Metal Removal rate
Internal Test Results
FEATURES BENEFITS
Exceptional lifetime
Even on HF machines
Extra reinforcement for
High Frequency machines
High durability
Working under very high pressure
Improved mechanical resistance
Ultimate product safety
INNOVATIVE TECHNOLOGY Premium aggressive Norzon Plus grain High metal removal
Optimized for heavy duty applications
Lowest tool changeover time
SUPERIOR PRODUCT STABILITY Quantum bond system Long life
Less wheel change
Highest productivity rate
Lowest abrasive costs
KEY
Norton Quantum FC Norton Quantum LL
Competitor A Competitor B Conventional ZA Product
FOR OPTIMUM PERFORMANCE
Carbon Steel - High-alloyed steels
Tool steel - Stainless steel
RelativePerformance
MaterialRemovalRate(g/min)
120%
100%
80%
60%
40%
20%
0%
160%
120%
80%
40%
Quantum Long Life
removes material 10%
faster than the leading
competitor product.
Quantum Long Life
has a 50% longer wheel
life and optimizes tool
changes over time.
fast cut - grinding wheels
Specific Grinding energy used vs. Grindng CoMfort
Internal Test Results
Quantum Fast Cut wheels deliver
an extremely comfortable and efficient
grinding solution for all demanding
metal fabrication applications. They
maintain a consistently high stock
removal, even on hard alloy steels,
maximizing product throughput
without the need for high pressure.
Quantum Fast Cut wheels are designed
for low pressure, large contact area
operations and hard alloy steels.
FEATURES BENEFITS
Maximum
stock removal
Ceramic grain Highest metal removal rate
Extremely aggressive cut rate
Comfortable and very quick working
Lowest operating costs
Recommended for grinding large areas
Less strain on workers
and equipment
Dual Zone Design Pure Comfort
No spalling/chipping
Clean working with no burn
No need to apply high pressure
KEY
Norton Quantum FC Norton Quantum LL
Competitor A Competitor B Conventional ZA Product
FOR OPTIMUM PERFORMANCE
Carbon Steel - High-alloyed steels
Cast iron - Stainless steel
SpecificGrindingEnergy(KJ/gram)
GrindingComfort
160
140
120
100
80
60
40
20
0
Low
-
-
-
-
-
-
High
Quantum requires
less energy than a
competitor product
to remove the same
amount of material.
CUTTING-OFF WHEELS
For Superior cutting and grinding
Norton Quantum provides the best solutions for maintenance, oil and gas, offshore, energy, transportation, foundry, shipyards and metal
fabrication, grinding and cutting operations. Wherever you look for a cut rate or total value solution, Norton Quantum has your product.
Relative Performance
Internal Test Results
Quantum cutting-off wheels are
designed to provide exceptional
economic efficiency in your
industrial metal working operations.
They combine latest grain developments
with Norton’s cutting edge bond
technology to bring an unrivalled wheel
life and ultra-fast cut rates, unbeatable
in the market.
FEATURES BENEFITS
Exceptional cutting speed Premium aggressive Norzon Plus grain Quick cutting and lowest operating
abrasive costs
Straight and stable cut Full range of ultra-thin products
0,8, 1,0, 1,3, 1,6, 1,9 and 2,0mm
Lower material loss
Burr free cutting
Right tool for all cutting applications
Superior lifetime Quantum bond system Longest lifetime on the market
Extreme precision and straight cutting
No burn
Less dust
KEY
Norton Quantum
Top Competitor A
Top Competitor B
FOR OPTIMUM PERFORMANCE
Stainless steel - Tool steel - Metal sheets
Plastic laminated metal sheets - Carbon steel
Norton Quantum lasts 20%
longer than the leading
competitor product while
maintaining a similar cut rate.
120%
100%
80%
60%