The floor plans for Brickell Flatiron. Includes the floor plans for the penthouses at Brickell Flatiron. http://www.miamicondoinvestments.com/brickell-flatiron-condos

1. BRICKELL FLATIRON
N
T-01
2 / 2.5
1,401 sqft
130 m2
TOWER UNITS KEY PLAN
T-03
1 / 1.5
901 sqft
84 m2 T-05
1+DEN / 2
1,107 sqft
103 m2
T-07
1+DEN / 2
1,107 sqft
103 m2
T-09
2 / 2.5
1,369 sqft
127 m2
T-12
2+DEN / 2.5
1,446 sqft
134 m2
T-14
1 / 1.5
933 sqft
87 m2
T-15
2+DEN / 2.5
1,446 sqft
134 m2
T-11
1 / 1.5
906 sqft
84 m2
T-10
1 / 1.5
906 sqft
84 m2
T-08
1 / 1.5
906 sqft
84 m2
T-06
1 / 1.5
898 sqft
83 m2
T-04
1 / 1
737 sqft
68 m2
T-02
3 / 3.5
2,025 sqft
188 m2
N >
TOWER KEY PLAN
Stated dimensions are measured to the exterior boundaries of the exterior walls and the centerline of interior demising walls and in fact vary from the dimensions that would be determined by using the description and deÿnition of the “Unit” set forth in the Declaratio n (which generally only includes the interior airspace between the perimeter walls and excludes interior structural components). Note that measurements
of rooms set forth on this floor plan are generally taken at the greatest points of each given room (as if the room were a perfect rectangle), without regard for any cutouts. Accordingly, the area of the actual room will typically be smaller than the product obtained by multiplying the stated length times width. All dimensions are approximate and may vary with actual construction, and all floor plans and development
plans are subject to change.

2. BRICKELL FLATIRON
N
N >
PH-02
3 / 3.5
2,406 sqft
224 m2
PH-01
3+DEN / 3.5
2,123 sqft
197 m2
PENTHOUSE UNITS PH-04
4+DEN / 4.5
2,592 sqft
241 m2
PH-06
2+DEN / 2.5
1,350 sqft
125 m2
PH-07
3 / 3.5
1,912 sqft
178 m2
PH-08
3 / 3.5
1,912 sqft
178 m2
PH-05
2 / 2.5
1,369 sqft
127 m2
PH-03
3+DEN / 3.5
2,211 sqft
205 m2
PENTHOUSE KEY PLAN
Stated dimensions are measured to the exterior boundaries of the exterior walls and the centerline of interior demising walls and in fact vary from the dimensions that would be determined by using the description and deÿnition of the “Unit” set forth in the Declaratio n (which generally only includes the interior airspace between the perimeter walls and excludes interior structural components). Note that measurements
of rooms set forth on this floor plan are generally taken at the greatest points of each given room (as if the room were a perfect rectangle), without regard for any cutouts. Accordingly, the area of the actual room will typically be smaller than the product obtained by multiplying the stated length times width. All dimensions are approximate and may vary with actual construction, and all floor plans and development
plans are subject to change.