The document is a service manual for a Bobcat telescopic handler. It contains sections on safety, maintenance, hydraulic systems, drive systems, electrical systems, and more. Instructions are provided for qualified service technicians on servicing and repairing the machine. Safety is emphasized, including ensuring proper machine function after any repairs or adjustments are made.
Bobcat t36120 sl telescopic handler service repair manual (t36120sl sn b3gs11...jfjskeksemm
The document provides safety instructions and maintenance information for servicing a Bobcat telescopic handler. It emphasizes that safe operation is the operator's responsibility and requires a qualified operator. When servicing or dismantling the machine, precautions must be taken to avoid silica dust and properly dispose of components. Fire prevention measures are outlined for maintenance, operation, electrical systems, fueling, welding and use of fire extinguishers. The document also provides information on locating serial numbers and inspecting the machine after repairs.
Massey ferguson mf 307 combine parts catalogue manualfjsekdemmd
This document provides parts information for the knife drive system on a Massey Ferguson 307 combine. It includes three pages of details on the knife crank drive, knife wobble drive, and associated components. The parts are broken down with part numbers, quantities, descriptions, and whether they are for the serrated or smooth knife versions.
Massey ferguson mf 264 t s tractor parts catalogue manualfjsekdemmd
This document provides a list of parts for a Massey Ferguson MF 264 T S tractor engine. It includes 61 items ranging from major components like the cylinder block and crankshaft to smaller individual parts like bolts, seals, and gaskets. Each item lists the part number, quantity, description, and any relevant comments. The document contains detailed diagrams and part listings for the engine's main systems and components.
Massey ferguson mf 240 xtra tractor (india) parts catalogue manualfjsekdemmd
This document contains a parts catalog for the engine, fuel, and exhaust systems of a Massey Ferguson 240 XTRA tractor for India. It consists of 44 pages listing over 200 individual parts for these systems, organized by component. For each part, the document provides the part number, quantity, description, and any additional technical specifications or application details. It distinguishes between parts for different engine types and those specific to South Africa versus other regions.
Massey ferguson mf 187 combine parts catalogue manualfjsekdemmd
This document provides parts information for various components of a Massey Ferguson MF 187 combine, including:
- An 8-foot and 10-foot knife assembly, listing individual parts and quantities.
- A knife drive crank drive system, listing pulleys, bearings, and other components.
- A shaft for the knife drive system.
- A wobble drive and additional details for the wobble drive component.
- A reel drive hydraulic adjusting system with pins, levers, plates and other parts.
Massey ferguson mf 164 t s tractor parts catalogue manualfjsekdemmd
This document provides a parts list for a Massey Ferguson MF 164 T S tractor. It includes 60 items ranging from major components like the cylinder block and crankshaft to smaller parts like bolts, washers, and seals. Each part is listed with its part number, quantity used, description, and any relevant comments. The parts are grouped into relevant systems of the tractor like the cylinder head, timing gear, and lubricating oil system.
Massey ferguson mf 164 t f tractor parts catalogue manualfjsekdemmd
This document provides a parts list for a Massey Ferguson MF 164 T F tractor engine. It includes over 70 items ranging from major components like the cylinder block, crankshaft, cylinder head and cover, to minor items like bolts, seals, and gaskets. Each item lists the part number, quantity, description, and any relevant comments. The parts are grouped by component and include exploded diagrams showing how they fit together.
Massey ferguson mf 38 combine ( 47597) parts catalogue manualfjsekdemmd
This document provides a parts list for a Massey Ferguson MF 38 combine. It contains over 100 items with part numbers, quantities, descriptions, and some additional details. The parts listed are for various components of the combine including knives and fingers, the feeder drum, feeder auger, guarding and reducing equipment.
Bobcat t36120 sl telescopic handler service repair manual (t36120sl sn b3gs11...jfjskeksemm
The document provides safety instructions and maintenance information for servicing a Bobcat telescopic handler. It emphasizes that safe operation is the operator's responsibility and requires a qualified operator. When servicing or dismantling the machine, precautions must be taken to avoid silica dust and properly dispose of components. Fire prevention measures are outlined for maintenance, operation, electrical systems, fueling, welding and use of fire extinguishers. The document also provides information on locating serial numbers and inspecting the machine after repairs.
Massey ferguson mf 307 combine parts catalogue manualfjsekdemmd
This document provides parts information for the knife drive system on a Massey Ferguson 307 combine. It includes three pages of details on the knife crank drive, knife wobble drive, and associated components. The parts are broken down with part numbers, quantities, descriptions, and whether they are for the serrated or smooth knife versions.
Massey ferguson mf 264 t s tractor parts catalogue manualfjsekdemmd
This document provides a list of parts for a Massey Ferguson MF 264 T S tractor engine. It includes 61 items ranging from major components like the cylinder block and crankshaft to smaller individual parts like bolts, seals, and gaskets. Each item lists the part number, quantity, description, and any relevant comments. The document contains detailed diagrams and part listings for the engine's main systems and components.
Massey ferguson mf 240 xtra tractor (india) parts catalogue manualfjsekdemmd
This document contains a parts catalog for the engine, fuel, and exhaust systems of a Massey Ferguson 240 XTRA tractor for India. It consists of 44 pages listing over 200 individual parts for these systems, organized by component. For each part, the document provides the part number, quantity, description, and any additional technical specifications or application details. It distinguishes between parts for different engine types and those specific to South Africa versus other regions.
Massey ferguson mf 187 combine parts catalogue manualfjsekdemmd
This document provides parts information for various components of a Massey Ferguson MF 187 combine, including:
- An 8-foot and 10-foot knife assembly, listing individual parts and quantities.
- A knife drive crank drive system, listing pulleys, bearings, and other components.
- A shaft for the knife drive system.
- A wobble drive and additional details for the wobble drive component.
- A reel drive hydraulic adjusting system with pins, levers, plates and other parts.
Massey ferguson mf 164 t s tractor parts catalogue manualfjsekdemmd
This document provides a parts list for a Massey Ferguson MF 164 T S tractor. It includes 60 items ranging from major components like the cylinder block and crankshaft to smaller parts like bolts, washers, and seals. Each part is listed with its part number, quantity used, description, and any relevant comments. The parts are grouped into relevant systems of the tractor like the cylinder head, timing gear, and lubricating oil system.
Massey ferguson mf 164 t f tractor parts catalogue manualfjsekdemmd
This document provides a parts list for a Massey Ferguson MF 164 T F tractor engine. It includes over 70 items ranging from major components like the cylinder block, crankshaft, cylinder head and cover, to minor items like bolts, seals, and gaskets. Each item lists the part number, quantity, description, and any relevant comments. The parts are grouped by component and include exploded diagrams showing how they fit together.
Massey ferguson mf 38 combine ( 47597) parts catalogue manualfjsekdemmd
This document provides a parts list for a Massey Ferguson MF 38 combine. It contains over 100 items with part numbers, quantities, descriptions, and some additional details. The parts listed are for various components of the combine including knives and fingers, the feeder drum, feeder auger, guarding and reducing equipment.
Massey ferguson mf 34 combine (br) parts catalogue manualfjsekdemmd
This document provides a parts list for the engine and cylinder block of a Massey Ferguson MF 34 combine. It includes 22 line items with part numbers, quantities, descriptions, and comments for individual parts such as the cylinder block, plugs, bushings, bearings, pins, and shims that make up the engine and cylinder block. Serial numbers are provided for some parts to indicate when different part numbers were used.
Massey ferguson mf 34 combine ( 47714) parts catalogue manualfjsekdemmd
This document contains parts lists and diagrams for components of a Massey Ferguson MF 34 combine harvester, including the straw divider, knives and fingers, knife crank and belt crank, and feeder auger. It provides part numbers, quantities, and brief descriptions for over 50 individual parts across these systems. Diagrams visually depict the components and their positions relative to each other.
Massey ferguson mf 32 combines ( 53050) parts catalogue manualfjsekdemmd
This document provides a list of parts for Massey Ferguson MF 30/32 combines. It includes over 150 individual part numbers, quantities, descriptions, and additional comments for items related to knives, fingers, and table augers for the combines. The parts are organized into tables with items numbered sequentially. Specifications like part lengths are included where relevant.
Massey ferguson mf 32 combines ( 53049) parts catalogue manualfjsekdemmd
The document provides a parts list for Massey Ferguson MF 30/32 combines. It contains over 150 items with part numbers, quantities, descriptions, and some additional comments. The parts listed are for components of the feeder drum and knives/fingers assemblies for the combines. Comments provide information on various optional equipment and configurations for different models.
Massey ferguson mf 31 combine parts catalogue manualfjsekdemmd
This document provides a parts list for a Massey Ferguson MF 31 combine. It includes over 50 items with corresponding part numbers, descriptions, and other details. The parts listed are for the straw divider, knives and fingers, knife crank and belt crank, and feeder drum systems of the MF 31 combine.
Massey ferguson mf 30 combines ( 53050) parts catalogue manualfjsekdemmd
This document provides a list of parts for Massey Ferguson MF 30/32 combines. It includes over 150 individual part numbers, quantities, descriptions, and additional comments for items related to knives, fingers, and table augers for the combines. The parts are organized into tables with items numbered sequentially and including specifications like length for some parts. Footnotes provide additional details for some items.
Massey ferguson mf 30 combines ( 53049) parts catalogue manualfjsekdemmd
The document provides a parts list for Massey Ferguson MF 30/32 combines. It contains over 150 items with part numbers, quantities, descriptions, and some additional comments. The parts listed are for components of the feeder drum and knives/fingers assemblies for the combines. Comments provide information on various configurations including drum sizes and optional equipment.
Massey ferguson mf 29 29 xp combines parts catalogue manualfjsekdemmd
This document provides a parts list for a Massey Ferguson MF 29/29 XP combine. It includes over 50 items with part numbers, descriptions, and other identifying information. The parts listed are for components of the straw divider, knives and fingers, knife crank and belt crank, and feeder drum.
Kobelco md140 c hydraulic excavator service repair manualfjsekdemmd
This document is the shop manual for the MD140C hydraulic excavator issued in October 1990. It provides information on repairs and specifications for the MD140C excavator. Kobelco reserves the right to make design changes and improvements to products without updating previously sold units. Dimensions and specifications listed are approximate. Permission is required to reuse any content from this manual.
This document is a service manual that provides instructions for maintaining and repairing a Kobelco 230SRLC-3 hydraulic excavator. It includes 7 sections covering specifications, maintenance, systems, disassembly, troubleshooting, engines, and installing optional attachments. The manual provides details on maintenance procedures, removing and replacing components, and identifying faults. Safety precautions are outlined to prevent injury when working on the excavator. Technical drawings and part numbers are included to aid repair and replacement of parts.
Claas f1200 c1200 soja getreide lexion (type 442) service repair manualfjsekdemmd
This document is a repair manual that provides instructions for repairing various components of an agricultural vehicle. It includes sections on general safety procedures, torque specifications for fasteners, lubrication specifications, and procedures for removing and installing drive belts, drive chains, universal drive shafts, and cam-type cut-out clutches. Detailed diagrams and step-by-step instructions are provided for servicing the vehicle's various drive components.
Caterpillar cat d8 t track type tractor dozer bulldozer (prefix kpz) service ...fjsekdemmd
The document provides instructions for disassembling the transmission of a D8T track-type tractor. It lists the required tools and provides detailed steps and illustrations for removing components such as transmission covers, valves, rotors, gears, pistons, plates, springs, and seals. Special care must be taken when handling springs and heavy components. Friction discs and plates must be kept in their original order.
Caterpillar cat d8 t track type tractor dozer bulldozer (prefix j8b) service ...fjsekdemmd
1. The document provides installation instructions for an implement pump on a D8T track-type tractor. It details 34 steps for installing various parts like valves, springs, seals and bearings into the pump housing.
2. Proper cleaning and lubrication of parts is emphasized before assembly. Tools are listed and safety precautions noted, like wearing protective equipment when working with spring loaded parts.
3. Dimensions are checked at various points using feeler gauges and indicators to ensure correct bearing preloads and clearances. The pump is then installed on the tractor using lifting devices due to its weight of around 165 pounds.
Caterpillar cat d8 t track type tractor dozer bulldozer (prefix aw4) service ...fjsekdemmd
The document provides instructions for removing and installing various components of the final drive, steering planetary, and brake systems of a D8T track-type tractor. The components include the outer and inner planetary carriers, ring gear, friction discs, thrust disc, planetary carrier, shaft, gears, and bearings. The instructions describe using various tools to remove bolts, seals, and components. Precautions are given for heavy components that require lifting devices during removal and installation.
Yale e216 erp040 dh lift truck service repair manualfjsekdemmd
This document provides a service manual table of contents for a drive unit assembly. The table of contents lists sections on wet disc brake repair, gearbox replacement, drive unit removal, and main housing repair. Procedures are provided for removing, inspecting, installing, disassembling, assembling, and cleaning various components of the drive unit. Safety precautions are also outlined.
Yale e216 erp25 alf lift truck (europe) service repair manualfjsekdemmd
This document provides a summary of the frame components for an ERP20-30ALF (E216) lift truck model. It describes the main frame, overhead guard, hood and seat assembly, battery restraint system, and counterweight. The main frame supports various other parts and assemblies. The overhead guard fastens to the main frame and cowl to protect the operator. The hood and seat assembly are part of the battery restraint system, which aims to hold the battery in place during a tip over. Adjustable spacers in the battery compartment help secure the battery. The document provides instructions for replacing or servicing various frame parts.
Toyota 62 6 fd20 forklift service repair manualfjsekdemmd
This manual provides service procedures for the Toyota Forklift 6FG10-30 series. It covers models from January 1994 and their corresponding engines. The manual notes that designs may have changed, requiring updates from Toyota. It directs the user to additional engine manuals for service procedures on mounted engines. An index lists the sections of the manual, which include general information, the engine, transmission, axles, steering, body, and maintenance components.
Toyota 62 5fd23 forklift service repair manualfjsekdemmd
This document provides an overview and service manual for the TOYOTA FORKLIFT 5FG10-30/5FD70-30 Series. It covers the models produced between August 1986 and August 1989, as well as models after September 1989 that underwent minor changes. The manual is intended to provide technicians with information to correctly service the corresponding forklift models. It also lists reference manuals for the mounted engines.
Daewoo doosan dx480 lc excavator service repair manualfjsekdemmd
The document provides safety information and instructions for operating a Daewoo track excavator. It outlines general safety essentials, labels the location of safety labels on the machine, provides a summary of safety precautions for lifting, and cautions against unauthorized modifications. Sections cover safety before starting the engine, during machine operation, maintenance, working with batteries, towing, shipping, and lifting with slings. Operators are instructed to thoroughly read and understand the safety content.
Case cx16 b mini excavator service repair manualfjsekdemmd
This document is a service manual for CNH Cre 9-88670 Mini Excavators CX16B and CX18B. It contains sections on safety rules and signs, specifications, maintenance standards and procedures, troubleshooting, and repair of systems like hydraulics, electrical, engine, and other components. The manual provides information on operating principles, disassembly and assembly, tools required, and technical data to aid in maintenance and repairs of the mini excavators.
Charging Fueling & Infrastructure (CFI) Program by Kevin MillerForth
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Massey ferguson mf 34 combine (br) parts catalogue manualfjsekdemmd
This document provides a parts list for the engine and cylinder block of a Massey Ferguson MF 34 combine. It includes 22 line items with part numbers, quantities, descriptions, and comments for individual parts such as the cylinder block, plugs, bushings, bearings, pins, and shims that make up the engine and cylinder block. Serial numbers are provided for some parts to indicate when different part numbers were used.
Massey ferguson mf 34 combine ( 47714) parts catalogue manualfjsekdemmd
This document contains parts lists and diagrams for components of a Massey Ferguson MF 34 combine harvester, including the straw divider, knives and fingers, knife crank and belt crank, and feeder auger. It provides part numbers, quantities, and brief descriptions for over 50 individual parts across these systems. Diagrams visually depict the components and their positions relative to each other.
Massey ferguson mf 32 combines ( 53050) parts catalogue manualfjsekdemmd
This document provides a list of parts for Massey Ferguson MF 30/32 combines. It includes over 150 individual part numbers, quantities, descriptions, and additional comments for items related to knives, fingers, and table augers for the combines. The parts are organized into tables with items numbered sequentially. Specifications like part lengths are included where relevant.
Massey ferguson mf 32 combines ( 53049) parts catalogue manualfjsekdemmd
The document provides a parts list for Massey Ferguson MF 30/32 combines. It contains over 150 items with part numbers, quantities, descriptions, and some additional comments. The parts listed are for components of the feeder drum and knives/fingers assemblies for the combines. Comments provide information on various optional equipment and configurations for different models.
Massey ferguson mf 31 combine parts catalogue manualfjsekdemmd
This document provides a parts list for a Massey Ferguson MF 31 combine. It includes over 50 items with corresponding part numbers, descriptions, and other details. The parts listed are for the straw divider, knives and fingers, knife crank and belt crank, and feeder drum systems of the MF 31 combine.
Massey ferguson mf 30 combines ( 53050) parts catalogue manualfjsekdemmd
This document provides a list of parts for Massey Ferguson MF 30/32 combines. It includes over 150 individual part numbers, quantities, descriptions, and additional comments for items related to knives, fingers, and table augers for the combines. The parts are organized into tables with items numbered sequentially and including specifications like length for some parts. Footnotes provide additional details for some items.
Massey ferguson mf 30 combines ( 53049) parts catalogue manualfjsekdemmd
The document provides a parts list for Massey Ferguson MF 30/32 combines. It contains over 150 items with part numbers, quantities, descriptions, and some additional comments. The parts listed are for components of the feeder drum and knives/fingers assemblies for the combines. Comments provide information on various configurations including drum sizes and optional equipment.
Massey ferguson mf 29 29 xp combines parts catalogue manualfjsekdemmd
This document provides a parts list for a Massey Ferguson MF 29/29 XP combine. It includes over 50 items with part numbers, descriptions, and other identifying information. The parts listed are for components of the straw divider, knives and fingers, knife crank and belt crank, and feeder drum.
Kobelco md140 c hydraulic excavator service repair manualfjsekdemmd
This document is the shop manual for the MD140C hydraulic excavator issued in October 1990. It provides information on repairs and specifications for the MD140C excavator. Kobelco reserves the right to make design changes and improvements to products without updating previously sold units. Dimensions and specifications listed are approximate. Permission is required to reuse any content from this manual.
This document is a service manual that provides instructions for maintaining and repairing a Kobelco 230SRLC-3 hydraulic excavator. It includes 7 sections covering specifications, maintenance, systems, disassembly, troubleshooting, engines, and installing optional attachments. The manual provides details on maintenance procedures, removing and replacing components, and identifying faults. Safety precautions are outlined to prevent injury when working on the excavator. Technical drawings and part numbers are included to aid repair and replacement of parts.
Claas f1200 c1200 soja getreide lexion (type 442) service repair manualfjsekdemmd
This document is a repair manual that provides instructions for repairing various components of an agricultural vehicle. It includes sections on general safety procedures, torque specifications for fasteners, lubrication specifications, and procedures for removing and installing drive belts, drive chains, universal drive shafts, and cam-type cut-out clutches. Detailed diagrams and step-by-step instructions are provided for servicing the vehicle's various drive components.
Caterpillar cat d8 t track type tractor dozer bulldozer (prefix kpz) service ...fjsekdemmd
The document provides instructions for disassembling the transmission of a D8T track-type tractor. It lists the required tools and provides detailed steps and illustrations for removing components such as transmission covers, valves, rotors, gears, pistons, plates, springs, and seals. Special care must be taken when handling springs and heavy components. Friction discs and plates must be kept in their original order.
Caterpillar cat d8 t track type tractor dozer bulldozer (prefix j8b) service ...fjsekdemmd
1. The document provides installation instructions for an implement pump on a D8T track-type tractor. It details 34 steps for installing various parts like valves, springs, seals and bearings into the pump housing.
2. Proper cleaning and lubrication of parts is emphasized before assembly. Tools are listed and safety precautions noted, like wearing protective equipment when working with spring loaded parts.
3. Dimensions are checked at various points using feeler gauges and indicators to ensure correct bearing preloads and clearances. The pump is then installed on the tractor using lifting devices due to its weight of around 165 pounds.
Caterpillar cat d8 t track type tractor dozer bulldozer (prefix aw4) service ...fjsekdemmd
The document provides instructions for removing and installing various components of the final drive, steering planetary, and brake systems of a D8T track-type tractor. The components include the outer and inner planetary carriers, ring gear, friction discs, thrust disc, planetary carrier, shaft, gears, and bearings. The instructions describe using various tools to remove bolts, seals, and components. Precautions are given for heavy components that require lifting devices during removal and installation.
Yale e216 erp040 dh lift truck service repair manualfjsekdemmd
This document provides a service manual table of contents for a drive unit assembly. The table of contents lists sections on wet disc brake repair, gearbox replacement, drive unit removal, and main housing repair. Procedures are provided for removing, inspecting, installing, disassembling, assembling, and cleaning various components of the drive unit. Safety precautions are also outlined.
Yale e216 erp25 alf lift truck (europe) service repair manualfjsekdemmd
This document provides a summary of the frame components for an ERP20-30ALF (E216) lift truck model. It describes the main frame, overhead guard, hood and seat assembly, battery restraint system, and counterweight. The main frame supports various other parts and assemblies. The overhead guard fastens to the main frame and cowl to protect the operator. The hood and seat assembly are part of the battery restraint system, which aims to hold the battery in place during a tip over. Adjustable spacers in the battery compartment help secure the battery. The document provides instructions for replacing or servicing various frame parts.
Toyota 62 6 fd20 forklift service repair manualfjsekdemmd
This manual provides service procedures for the Toyota Forklift 6FG10-30 series. It covers models from January 1994 and their corresponding engines. The manual notes that designs may have changed, requiring updates from Toyota. It directs the user to additional engine manuals for service procedures on mounted engines. An index lists the sections of the manual, which include general information, the engine, transmission, axles, steering, body, and maintenance components.
Toyota 62 5fd23 forklift service repair manualfjsekdemmd
This document provides an overview and service manual for the TOYOTA FORKLIFT 5FG10-30/5FD70-30 Series. It covers the models produced between August 1986 and August 1989, as well as models after September 1989 that underwent minor changes. The manual is intended to provide technicians with information to correctly service the corresponding forklift models. It also lists reference manuals for the mounted engines.
Daewoo doosan dx480 lc excavator service repair manualfjsekdemmd
The document provides safety information and instructions for operating a Daewoo track excavator. It outlines general safety essentials, labels the location of safety labels on the machine, provides a summary of safety precautions for lifting, and cautions against unauthorized modifications. Sections cover safety before starting the engine, during machine operation, maintenance, working with batteries, towing, shipping, and lifting with slings. Operators are instructed to thoroughly read and understand the safety content.
Case cx16 b mini excavator service repair manualfjsekdemmd
This document is a service manual for CNH Cre 9-88670 Mini Excavators CX16B and CX18B. It contains sections on safety rules and signs, specifications, maintenance standards and procedures, troubleshooting, and repair of systems like hydraulics, electrical, engine, and other components. The manual provides information on operating principles, disassembly and assembly, tools required, and technical data to aid in maintenance and repairs of the mini excavators.
Charging Fueling & Infrastructure (CFI) Program by Kevin MillerForth
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Top-Quality AC Service for Mini Cooper Optimal Cooling PerformanceMotor Haus
Ensure your Mini Cooper stays cool and comfortable with our top-quality AC service. Our expert technicians provide comprehensive maintenance, repairs, and performance optimization, guaranteeing reliable cooling and peak efficiency. Trust us for quick, professional service that keeps your Mini Cooper's air conditioning system in top condition, ensuring a pleasant driving experience year-round.
Dahua provides a comprehensive guide on how to install their security camera systems. Learn about the different types of cameras and system components, as well as the installation process.
Charging and Fueling Infrastructure Grant: Round 2 by Brandt HertensteinForth
Brandt Hertenstein, Program Manager of the Electrification Coalition gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Charging Fueling & Infrastructure (CFI) Program Resources by Cat PleinForth
Cat Plein, Development & Communications Director of Forth, gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
car rentals in nassau bahamas | atv rental nassau bahamasjustinwilson0857
At Dash Auto Sales & Car Rentals, we take pride in providing top-notch automotive services to residents and visitors alike in Nassau, Bahamas. Whether you're looking to purchase a vehicle, rent a car for your vacation, or embark on an exciting ATV adventure, we have you covered with our wide range of options and exceptional customer service.
Website: www.dashrentacarbah.com
2. MAINTENANCE SAFETY
Never service the Bobcat telescopic
handler without instructions.
MSW43-EN-0211
Have good ventilation when
welding or grinding painted
parts.
Wear dust mask when grinding
painted parts. Toxic dust and gas
can be produced.
Avoid exhaust fume leaks which
can kill without warning. Exhaust
system must be tightly sealed.
Cleaning and maintenance are
required daily.
CORRECT
P-90216
Lead-acid batteries produce
flammable and explosive gases.
Keep arcs, sparks, flames and
lighted tobacco away from
batteries.
Batteries contain acid which
burns eyes or skin on contact.
Wear protective clothing. If acid
contacts body, flush well with
water. For eye contact flush well
and get immediate medical
attention.
Safety Alert Symbol: This symbol with a warning statement,
means: “Warning, be alert! Your safety
is involved!” Carefully read the
message that follows.
Disconnecting or loosening any
hydraulic tubeline, hose, fitting,
component or a part failure can
cause boom to drop. Do not go
under boom when raised unless
supported by an approved boom
stop. Replace if damaged.
Keep body, jewelry and clothing
away from moving parts,
electrical contact, hot parts and
exhaust.
Wear eye protection to guard
from battery acid, compressed
springs, fluids under pressure
and flying debris when engines
are running or tools are used.
Use eye protection approved for
type of welding.
Never work on telescopic
handler with boom up unless
boom is held by an approved
boom stop. Replace if damaged.
Never modify equipment or add
attachments not approved by
Bobcat Company.
CORRECT
NA5428
WRONG
NA5432
WRONG
NA5433
WRONG
NA5434
WRONG
NA5436
WRONG
B-6589
Maintenance procedures which are given in the Operation & Maintenance Manual can be performed by the owner/operator
without any specific technical training. Maintenance procedures which are not in the Operation & Maintenance Manual must be
performed ONLY BY QUALIFIED BOBCAT SERVICE PERSONNEL. Always use genuine Bobcat replacement parts.
WARNING
Instructions are necessary before operating or servicing machine. Read and
understand the Operation & Maintenance Manual, Operator’s Handbook and
signs (decals) on machine. Follow warnings and instructions in the manuals
when making repairs, adjustments or servicing. Check for correct function after
adjustments, repairs or service. Untrained operators and failure to follow
instructions can cause injury or death. W-2003-0807
3 of 741
DealerCopy--NotforResale
5. TL358
1-7 Service Manual
FOREWORD
This manual is for the Bobcat telescopic handler mechanic. It provides necessary servicing and adjustment
procedures for the Bobcat telescopic handler and its component parts and systems. Refer to the Operation &
Maintenance Manual for operating instructions, starting procedure, daily checks, etc.
A general inspection of the following items must be made after the telescopic handler has had service or repair:
FW TLS EMEA-0411 SM
1. Check that ROPS/FOPS
(Including right side window)
is in good condition and is not
modified.
9. Enclosure door latches must
open and close freely.
2. Check that ROPS mounting
hardware is tightened and is
Bobcat approved.
10. Attachment locking pins must
function correctly and be in
good condition.
3. The seat belt must be
correctly installed, functional
and in good condition.
11. Safety treads must be in good
condition.
4. Check boom support device,
replace if damaged.
12. Check for correct function of
indicator lamps and gauges.
5. Machine signs must be
legible and in the correct
location.
13. Check hydraulic fluid level,
engine oil level and fuel
supply.
6. Check tires for wear and
pressure. Use only approved
tires.
14. Inspect for fuel, oil or
hydraulic fluid leaks.
7. Check for correct function of
the work lights.
15. Lubricate the telescopic
handler.
8. The parking brake must
function correctly.
16. Check the condition of the
battery and cables.
9 of 741
DealerCopy--NotforResale
6. TL358
1-8 Service Manual
FW TLS EMEA-0411 SM
17. Inspect the air cleaner for
damage or leaks. Check the
condition of the element.
20. Operate the telescopic
handler and check all
functions.
18. Check the electrical charging
system.
21. Check for any field
modification not completed.
19. Inspect for loose or broken
parts or connections.
22. Recommend to the owner
that all necessary corrections
be made before the machine
is returned to service.
10 of 741
DealerCopy--NotforResale
7. TL358
1-9 Service Manual
SAFETY INSTRUCTIONS
Safe Operation Is The Operator’s Responsibility
WARNING
Operator must have instructions before operating the
machine. Untrained operators can cause injury or
death.
W-2001-0502
IMPORTANT
This notice identifies procedures which must be
followed to avoid damage to the machine.
I-2019-0284
DANGER
The signal word DANGER on the machine and in the
manuals indicates a hazardous situation which, if not
avoided, will result in death or serious injury.
D-1002-1107
WARNING
The signal word WARNING on the machine and in the
manuals indicates a potentially hazardous situation
which, if not avoided, could result in death or serious
injury.
W-2044-1107
The telescopic handler and attachment must be in good
operating condition before use.
Check all of the items on the Bobcat Service Schedule
Decal under the 8-10 hour column or as shown in the
Operation & Maintenance Manual.
Safe Operation Needs A Qualified Operator
For an operator to be qualified, he or she must not use
drugs or alcoholic drinks which impair alertness or co-
ordination while working. An operator who is taking
prescription drugs must get medical advice to determine
if he or she can safely operate a machine.
A Qualified Operator Must Do The Following:
Understand the Written Instructions, Rules and
Regulations
• The written instructions from Bobcat Company
include the Delivery Report, Operation &
Maintenance Manual, Operator’s Handbook and
machine signs (decals).
• Check the rules and regulations at your location. The
rules may include an employer’s work safety
requirements. For driving on public roads, the
machine must be equipped as stipulated by the local
regulations authorising operation on public roads in
your specific country. Regulations may identify a
hazard such as a utility line.
• For operating the machine, some countries require an
operator license. Check the regulations at your
location.
Have Training with Actual Operation
• Operator training must consist of a demonstration and
verbal instruction. This training is given by your
Bobcat dealer before the product is delivered.
• The new operator must start in an area without
bystanders or structures and use all the controls until
he or she can operate the machine and attachment
safely under all conditions of the work area. Always
fasten seat belt before operating.
Know the Work Conditions
• Know the weight of the materials being handled.
Avoid exceeding the Rated Load Capacity of the
machine (as indicated on the Load Capacity Charts).
Material which is very dense will be heavier than the
same volume of less dense material. Reduce the size
of load if handling dense material.
• The operator must know any prohibited uses or work
areas, for example, he or she needs to know about
excessive slopes.
• Know the location of any underground lines.
• Wear tight fitting clothing. Always wear safety glasses
when doing maintenance or service. Safety glasses,
respiratory equipment, hearing protection or Front
Window Guard are required for some work. See your
Bobcat dealer about Bobcat Safety Equipment.
SI TH EMEA-0913 SM
This symbol with a warning statement means:
“Warning, be alert! Your safety is involved!”
Carefully read the message that follows.
Safety Alert Symbol
11 of 741
DealerCopy--NotforResale
8. TL358
1-10 Service Manual
SAFETY INSTRUCTIONS (CONT’D)
Safe Operation Needs A Qualified Operator (Cont’d)
Where overhead power lines are present in the operating
area, ensure sufficient clearance between the nearest of
these lines and any part of the machine.
The operator must survey his / her field of vision when
operating the telescopic handler. Adjust mirrors to obtain
the best visibility. Clean mirrors every day and more often
when necessary. Immediately replace any broken or
damaged mirrors. If a suspended load or the resulting
boom geometry blocks the vision of the operator
alternative carrying means must be considered.
The operator must know the wind speed. Do not use the
telescopic handler with wind speeds over 12,5 m/s.
Avoid Silica Dust
Cutting or drilling concrete containing sand or rock
containing quartz may result in exposure to silica dust.
Use a respirator, water spray or other means to control
dust.
Dismantling And Disposal
On the completion of its useful life, the machine and its
parts shall be disposed of in an environmental friendly
manner. Please contact your local dealer. Parts of the
machine can be remanufactured like the engine
depending on its age and condition, or recycled like
metals, plastics, rubbers and glasses. Respect the
environment and dispose of waste properly. Worn or
damaged parts shall not be left in the environment. Oils,
brake fluid, cooling refrigerants, batteries and cells shall
be disposed of in a proper manner through your local
dealer or recycling center.
SI TH EMEA-0413 SM
VOLTAGE MINIMUM DISTANCE
up to 50 kV 3 m
beyond 50 kV 5 m
12 of 741
DealerCopy--NotforResale
9. TL358
1-11 Service Manual
FIRE PREVENTION
Maintenance
The machine and some attachments have components
that are at high temperatures under normal operating
conditions. The primary source of high temperatures is
the engine and exhaust system. The electrical system, if
damaged or incorrectly maintained, can be a source of
arcs or sparks.
Flammable debris (leaves, straw, etc.) must be removed
regularly. If flammable debris is allowed to accumulate, it
can cause a fire hazard. Clean often to avoid this
accumulation. Flammable debris in the engine
compartment is a potential fire hazard.
The operator’s area, engine compartment and engine
cooling system must be inspected every day and cleaned
if necessary to prevent fire hazards and overheating.
All fuels, most lubricants and some coolants mixtures are
flammable. Flammable fluids that are leaking or spilled
onto hot surfaces or onto electrical components can
cause a fire.
Operation
Do not use the machine where exhaust, arcs, sparks or
hot components can contact flammable material,
explosive dust or gases.
Electrical
Check all electrical wiring and connections for damage.
Keep the battery terminals clean and tight. Repair or
replace any damaged part or wires that are loose or
frayed.
Battery gas can explode and cause serious injury. Use
the procedure in the Operation & Maintenance Manual
for connecting the battery and for jump starting. Do not
jump start or charge a frozen or damaged battery. Keep
any open flames or sparks away from batteries. Do not
smoke in battery charging area.
Hydraulic System
Check hydraulic tubes, hoses and fittings for damage
and leakage. Never use open flame or bare skin to check
for leaks. Hydraulic tubes and hoses must be properly
routed and have adequate support and secure clamps.
Tighten or replace any parts that show leakage.
Always clean fluid spills. Do not use petrol or diesel fuel
for cleaning parts. Use commercial non-flammable
solvents.
Fueling
Stop the engine and let it cool before adding fuel. No
smoking! Do not refuel a machine near open flames or
sparks. Fill the fuel tank outdoors.
Starting
Do not use ether or starting fluids on any engine that has
glow plugs. These starting aids can cause explosion and
injure you or bystanders.
Use the procedure in the Operation & Maintenance
Manual for connecting the battery and for jump starting.
SI TH EMEA-0413 SM
13 of 741
DealerCopy--NotforResale
10. TL358
1-12 Service Manual
FIRE PREVENTION (CONT’D)
Welding And Grinding
Always clean the machine and attachment, disconnect
the battery, and disconnect the wiring from the Bobcat
controllers before welding. Cover rubber hoses, battery
and all other flammable parts. Keep a fire extinguisher
near the machine when welding.
Have good ventilation when grinding or welding painted
parts. Wear dust mask when grinding painted parts.
Toxic dust or gas can be produced.
Dust generated from repairing non-metallic parts such as
hoods, fenders or covers can be flammable or explosive.
Repair such components in a well ventilated area away
from open flames or sparks.
Fire Extinguishers
Know where fire extinguishers and first aid kits are
located and how to use them. Inspect the fire
extinguisher and service the fire extinguisher regularly.
Obey the recommendations on the instructions plate.
Sl TH EMEA-0413 SM
14 of 741
DealerCopy--NotforResale
11. TL358
1-13 Service Manual
SERIAL NUMBER LOCATION
Always use the serial number of the telescopic handler
when requesting service information or when ordering
parts.
If any serial number plate is damaged, contact your
Bobcat dealer.
Telescopic Handler Serial Number
Figure 1
The telescopic handler serial number plate (Item 1) is
located on the right side of the chassis in front [Figure 1].
Explanation of telescopic handler serial number:
Engine Serial Number
Figure 2
The engine serial number can be found on the engine
serial number plate [Figure 2] in front of you when
opening the engine cover. Always use the full number
when ordering replacement parts.
P118580
P119099
1
XXXX XXXXX
Module 2. - Production
Sequence (Series)
Module 1. - Model / Engine
Combination
1. The four digit Model / Engine Combination Module
number identifies the model number and engine
combination.
2. The five digit Production Sequence Number identifies
the order which the telescopic handler is produced.
S38000
S38001
15 of 741
DealerCopy--NotforResale
12. TL358
1-14 Service Manual
SERIAL NUMBER LOCATION (CONT’D)
Other Serial Numbers
Other components can also have serial numbers and an
identification plate. Always use these serial numbers
when ordering parts.
DELIVERY REPORT
Figure 3
The delivery report [Figure 3] contains a list of items that
must be explained or shown to the owner or operator by
the dealer when the Bobcat telescopic handler is
delivered.
The delivery report must be reviewed and signed by the
owner or operator and the dealer.
B-16315
16 of 741
DealerCopy--NotforResale
13. TL358
1-15 Service Manual
BOBCAT TELESCOPIC HANDLER IDENTIFICATION
[A] Optional or Field Accessory. (Not Standard Equipment).
[B] Attachments - Several different attachments are available for the Bobcat telescopic handler.
[C] ROPS, FOPS - Roll Over Protective Structure, per ISO 3471, and Falling Object Protective Structure
per ISO 3449, Level II.
[D] TIRES - Standard tires are shown. Several different tire styles and sizes are available for the Bobcat telescopic
handler.
ITEM DESCRIPTION ITEM DESCRIPTION
1 Operation & Maintenance Manual and Operator’s
Handbook
11 Seat Belt
2 Mirrors 12 Boom Stop [A]
3 Work Lights 13 Operator Cab (ROPS and FOPS) [C]
4 Load Capacity Charts 14 Rotating Beacon [A]
5 Front Lights 15 Rear Work Light
6 Telescoping Boom 16 Tail Lights and Direction Signals
7 Boom Head 17 Tires [D]
8 Attachment Carrier [B] 18 Engine Cover
9 Boom 19 Sight Level Gauge
10 Parking Brake 20 Rear / Front Interior Mirror
NA9554
NA9555
9
6
8
14
12
11
10
15
3
5
7
1
17
2
13
4
16
18
19
20
2
17 of 741
DealerCopy--NotforResale
17. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
22 of 741
18. TL358
10-10-1 Service Manual
LIFTING AND BLOCKING THE TELESCOPIC
HANDLER
Procedure
Always park the machine on a flat, solid and level
surface.
WARNING
MACHINE FALLING OR MOVING CAN CAUSE
SERIOUS INJURY OR DEATH
Put jackstands under the front and rear of the
machine before running engine for service.
W-2718-0208
Figure 10-10-1
STOP the engine. Put the floor jack (Item 1) under the left
side of the front axle. Lift the telescopic handler and
install the first jackstand (Item 2) [Figure 10-10-1].
Figure 10-10-2
Put the floor jack (Item 1) under the right side of the front
axle. Lift the telescopic handler and install the second
jackstand (Item 2) [Figure 10-10-2].
Figure 10-10-3
Put the floor jack (Item 1) under the center of the rear
weight. Lift the telescopic handler and install jackstands
(Item 2) [Figure 10-10-3].
P119193
1
2
P119194
2
1
P119195
1
2
23 of 741
DealerCopy--NotforResale
19. TL358
10-20-1 Service Manual
OPERATOR CAB
Description
The Bobcat telescopic handler has an operator cab
(ROPS / FOPS) as standard equipment to protect the
operator. The seat belt must be worn for ROPS / FOPS
protection.
Check the ROPS / FOPS cab, mounting, and hardware
for damage. Never modify the ROPS / FOPS cab.
Replace the cab and hardware if damaged. See your
Bobcat dealer for parts.
ROPS / FOPS - Roll Over Protective Structure per ISO
3471, Falling Object Protective Structure per ISO 3449
(FOPS Level II) and OECD code 4, code 9 and code 10.
Operator cab category 1 per EN 15695-1:2009.
The operator cab does not provide protection against
hazardous substances. Do not use this machine under
conditions requiring protection against hazardous
substances.
WARNING
Never modify operator cab by welding, grinding,
drilling holes or adding attachments unless
instructed to do so by Bobcat Company. Do not
operate without right window. Changes to the cab
can cause loss of operator protection from rollover
and falling objects, and result in serious injury or
death.
W-2906-0211
Cab Door
Figure 10-20-1
Figure 10-20-2
The cab door can be opened from the outside of the cab
using the latch (Item 1) [Figure 10-20-1] and opened
from the inside of the cab when you push the lever (Item
1) [Figure 10-20-2] (as shown).
The cab door can be locked (Item 2) [Figure 10-20-1]
with the same key as the starter switch.
P119153
1
2
P119154
1
25 of 741
DealerCopy--NotforResale
20. TL358
10-20-2 Service Manual
OPERATOR CAB (CONT’D)
Cab Door Window
Figure 10-20-3
Turn the handle (Item 1) [Figure 10-20-3] (as shown) to
unlock the window. Push the window fully open until it
latches against the cab.
Figure 10-20-4
Push the knob (Item 1) [Figure 10-20-4] inside the cab to
disengage the latch and close the window.
Figure 10-20-5
Turn the handle (Item 1) [Figure 10-20-5] back into the
original position (as shown) to lock the window.P119155
1
S41638
1
P119155
1
26 of 741
DealerCopy--NotforResale