This document provides safety instructions and guidelines for servicing a Bobcat skid-steer loader. It emphasizes the importance of reading all manuals before operating or servicing the machine and following all warnings and instructions. A general inspection is recommended after any service or repairs to ensure the machine is safe to operate. This includes checking components like the ROPS, seat belt, lift arms, signs, controls and fluid levels. The loader should also be tested to confirm all functions are working properly.
Doosan d34 p scr diesel engine service repair operation maintenance manualfusekfksemwe
This operation and maintenance manual provides information to customers and technicians on engine management and maintenance techniques for Doosan Infracore's DL03 electronically controlled industrial diesel engines. It details specifications, defect diagnosis, component diagrams, and drawings to aid understanding and proper maintenance. Following the recommended procedures ensures high-level maintenance techniques, safety, and best performance. Doosan aims to continuously improve through development and investment.
Manual do proprietario cbx 250 twister 2008Darlan Diego
Este documento fornece instruções sobre a verificação diária do nível de óleo do motor e sobre a realização de revisões periódicas em concessionárias autorizadas Honda para manter a garantia válida. Além disso, orienta o leitor a consultar o manual do proprietário para mais detalhes sobre o funcionamento seguro e manutenção da motocicleta.
O documento fornece informações sobre a garantia e manutenção de motocicletas Honda, incluindo: 1) a garantia de 36 meses contra defeitos de fabricação, exceto itens de desgaste; 2) as duas primeiras revisões são gratuitas se realizadas dentro do prazo; 3) itens como pneus e pastilhas de freio não são cobertos após os primeiros 90 dias.
Este documento fornece instruções de serviço para a embreagem e seletor de marchas de uma motocicleta XR250. Ele inclui especificações de torque, ferramentas necessárias, diagnóstico de defeitos, remoção e instalação dos componentes da embreagem e seletor de marchas.
Este documento fornece instruções para serviços no pistão, árvore de manivelas, transmissão e componentes relacionados de um motor CB500. Inclui procedimentos para diagnóstico de defeitos, separação e montagem das carcaças do motor, remoção e instalação de componentes da transmissão e desmontagem e montagem da árvore primária e secundária.
Este manual fornece instruções para reparos no motor Cursor 13 Stralis, incluindo especificações técnicas, diagnóstico, desmontagem e montagem de componentes, além de dados para lubrificação, arrefecimento e alimentação.
Manual de serviço cg150 titan ks es esd cabecoteThiago Huari
Este documento fornece instruções para serviços no cabeçote e válvulas de um motor, incluindo diagnóstico de defeitos, teste de compressão, remoção e inspeção do cabeçote, substituição de guias de válvulas, e especificações.
Doosan d34 p scr diesel engine service repair operation maintenance manualfusekfksemwe
This operation and maintenance manual provides information to customers and technicians on engine management and maintenance techniques for Doosan Infracore's DL03 electronically controlled industrial diesel engines. It details specifications, defect diagnosis, component diagrams, and drawings to aid understanding and proper maintenance. Following the recommended procedures ensures high-level maintenance techniques, safety, and best performance. Doosan aims to continuously improve through development and investment.
Manual do proprietario cbx 250 twister 2008Darlan Diego
Este documento fornece instruções sobre a verificação diária do nível de óleo do motor e sobre a realização de revisões periódicas em concessionárias autorizadas Honda para manter a garantia válida. Além disso, orienta o leitor a consultar o manual do proprietário para mais detalhes sobre o funcionamento seguro e manutenção da motocicleta.
O documento fornece informações sobre a garantia e manutenção de motocicletas Honda, incluindo: 1) a garantia de 36 meses contra defeitos de fabricação, exceto itens de desgaste; 2) as duas primeiras revisões são gratuitas se realizadas dentro do prazo; 3) itens como pneus e pastilhas de freio não são cobertos após os primeiros 90 dias.
Este documento fornece instruções de serviço para a embreagem e seletor de marchas de uma motocicleta XR250. Ele inclui especificações de torque, ferramentas necessárias, diagnóstico de defeitos, remoção e instalação dos componentes da embreagem e seletor de marchas.
Este documento fornece instruções para serviços no pistão, árvore de manivelas, transmissão e componentes relacionados de um motor CB500. Inclui procedimentos para diagnóstico de defeitos, separação e montagem das carcaças do motor, remoção e instalação de componentes da transmissão e desmontagem e montagem da árvore primária e secundária.
Este manual fornece instruções para reparos no motor Cursor 13 Stralis, incluindo especificações técnicas, diagnóstico, desmontagem e montagem de componentes, além de dados para lubrificação, arrefecimento e alimentação.
Manual de serviço cg150 titan ks es esd cabecoteThiago Huari
Este documento fornece instruções para serviços no cabeçote e válvulas de um motor, incluindo diagnóstico de defeitos, teste de compressão, remoção e inspeção do cabeçote, substituição de guias de válvulas, e especificações.
This document is a repair manual for the Ares 806 containing several chapters on repair procedures and specifications for various components. Chapter A covers injection system checking procedures, injection feed components and identification, and the Tier II engine. It includes sections on checking procedures, component identification, operating principles, adjustments, removal/refitting, and diagnostic sheets.
Este manual fornece instruções para reparação de caminhões e ônibus com transmissões de 10 a 16 marchas, incluindo procedimentos para desmontagem e montagem de componentes como atuador da embreagem, flange de saída, carcaça do grupo planetário e portador planetário. O documento também lista ferramentas e materiais necessários para os reparos.
Catálogo Peças Honda Biz KS, ES, EX - ano 2011 e 2012w4rh4ck3r
O documento apresenta:
(1) Um catálogo de peças para a motocicleta BIZ 125 com instruções de uso, estrutura do catálogo e tabela de cores;
(2) Informações sobre os modelos, códigos de área e números de série aplicáveis;
(3) Uma amostra da etiqueta de cores com os códigos para peças coloridas.
Este documento fornece instruções para serviços no sistema de freio do modelo CB500, incluindo diagnóstico de defeitos, substituição de pastilhas e fluido de freio, sangria do sistema e remoção e inspeção dos componentes do freio dianteiro e traseiro.
Sistema hidráulico
Os tratores 6110J, 6125J, e 6130J são equipados com um sistema hidráulico de centro aberto com fluxo constante (bomba de engrenagem). Opcionalmente, eles podem ser equipados com um sistema hidráulico de centro fechado de 100 L/min (26,4 gpm) com bomba de pistão.
Os tratores 6145J, 6165J, 6180J e 6205J são equipados com um sistema hidráulico de centro fechado com bomba de pistão como equipamento padrão.
Modelo
Sistema hidráulico
Vazão da bomba, L/min (gpm)
6110J
Centro aberto com bomba de engrenagens (padrão)
Centro fechado com pistão de bomba (opcional)
65 (17,1) (padrão)
100 (26,4) (opcional)
6125J
Centro aberto com bomba de engrenagens (padrão)
Centro fechado com pistão de bomba (opcional)
65 (17,1) (padrão)
100 (26,4) (opcional)
6130J
Centro aberto com bomba de engrenagens (padrão)
Centro fechado com pistão de bomba (opcional)
65 () (padrão)
100 (26,4) (opcional)
6145J
Centro fechado com pistão de bomba
100 (26,4)
6165J
Centro fechado com pistão de bomba
110 (29)
6180J
Centro fechado com pistão de bomba
110 (29)
6205J
Centro fechado com pistão de bomba
110 (29)
Uma bomba única com detecção de carga fornece o óleo para o circuito da direção, levante de 3 pontos, válvulas de controle remoto (VCRVCR) e sistema de direção.
O fluxo gerado pela bomba é direcionado para o circuito de direção através de uma válvula de prioridade. O volume de óleo enviado para o sistema de direção é controlado por uma válvula de detecção de carga que identifica a carga a que as rodas direcionais são submetidas. Assim, o sistema fornece ao circuito da direção o fluxo necessário para o volante, sempre garantindo que somente a direção mínima seja necessária, independentemente da carga suportada pelo eixo dianteiro.
Da mesma forma, o circuito de direção, levante de 3 pontos, e módulo de VCR possuem um sistema de detecção de carga que controla a válvula proporcional. Dessa forma, a bomba fornece ao levante de 3 pontos e à VCR somente o fluxo nec
Este documento fornece instruções para serviços na roda traseira e suspensão da motocicleta Honda CR125R, incluindo: remoção e inspeção da roda traseira, diagnóstico de defeitos na suspensão, especificações técnicas e valores de torque recomendados.
Este documento fornece instruções para serviços na roda traseira e suspensão de uma motocicleta Honda CR250R, incluindo especificações técnicas, torques de fixação, ferramentas necessárias e procedimentos para inspeção, remoção, montagem e diagnóstico de defeitos.
O documento fornece instruções sobre como usar o manual de serviço para motocicletas Honda, descrevendo procedimentos de manutenção, especificações técnicas e torque de fixação.
Manual de serviço cg150 titan ks es esd manivelaThiago Huari
O documento fornece especificações e instruções para serviços relacionados à árvore de manivelas, transmissão e conjunto de partida de uma motocicleta CG125, incluindo a separação das carcaças do motor, inspeção dos componentes, substituição de rolamentos e montagem.
Este catálogo lista retentores para motos de várias marcas como Honda, Yamaha e Agrale. Fornece as medidas, local de aplicação e modelo de moto para cada retentor. Contém mais de 100 itens para garantir a fixação de peças como árvores de manivelas, cubos de roda e amortecedores em diversos modelos.
- O manual descreve os procedimentos de serviço para a motocicleta VT750C Shadow 750 de 2009, incluindo especificações, valores de torque, pontos de lubrificação e diagrama elétrico.
- Ele fornece instruções detalhadas para a remoção e instalação de componentes, manutenção preventiva e solução de problemas.
- O manual está organizado em 23 capítulos cobrindo todos os sistemas da motocicleta.
YALE H813 GP-GLP-GDP 090 LIFT TRUCK Service Repair Manualuekjmd kmwsed
This is the Highly Detailed factory service repair manual for theYALE H813 GP-GLP-GDP 090 LIFT TRUCK, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.YALE H813 GP-GLP-GDP 090 LIFT TRUCK Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
Frame
Operator's cab
Gm 4.3l v-6 engines
Kubota engine repair
Kubota diesel 3.6l engine
Cooling system
Lpg fuel system gm 4.3l engine with psi
Gasoline fuel system
1 and 2 sp ps transmission repair
Drive axle - dry brake
Drive axle and differential assembly repair
Steering axle
Brake system
Wet brakes - nmhg
Hydraulic gear pump
Hydraulic cleanliness procedures
Main control valve
Cylinder repair (mast s/n a551, a555, a559, a661, a662, a663, a66, b507,
B508, b509, b551, b555, b559, b562, b563, b564, b661, b662, b663, c515,
C551, c555, c559, d507, d508, d509, d515, d562, d563, d564, e509, and e564)
High voltage switch (hvs) ignition
Wire harness repair
User interface
Electrical system
Mast repairs (s/n a513, a514, a613, a614, a702, a703, a704, a705, a706,
A707, a751, a752, b513, b514, b586, b587, b588, b589, b590, b591, b749, b750, b751, b752, b753, b754)
Metric and inch (sae) fasteners
Calibration procedures
Periodic maintenance
Capacities and specifications
Diagrams and schematics
Diagnostic troubleshooting manual
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveYALE H813 GP-GLP-GDP 090 LIFT TRUCK Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
Manaul de serviço ms cbx250 (2006) 00 x6b-kpf-003 01. informaçõesThiago Huari
1. O documento fornece especificações técnicas detalhadas para vários componentes e sistemas de uma motocicleta, incluindo dimensões, peso, capacidades, especificações do motor, transmissão, suspensão, freios e sistemas elétricos.
2. São listados os padrões e limites de uso para diversas peças do motor, como pistão, biela, cabeçote, válvulas, embreagem, entre outros.
3. Instruções gerais sobre manutenção, ferramentas, números de
Massey ferguson mf290 xtra tractors (india) parts catalogue manualudjjjskkdmme
This document contains parts listings and technical specifications for engine components of Massey Ferguson 275/290 XTRA tractors. It includes sections for the engine, cylinder block, crankshaft, pistons, cylinder head, intake/exhaust valves, camshaft, cylinder head cover, and timing gear housing. Each section lists the relevant parts, quantities, descriptions, and any additional comments needed to identify application or revisions.
Manual de serviço cg150 titan ks es esd informacThiago Huari
Este manual fornece instruções sobre a manutenção de motocicletas CG125 produzidas a partir de 2002, dividido em 20 capítulos que descrevem os sistemas e componentes da motocicleta. O manual destaca a importância da manutenção preventiva de acordo com a tabela do capítulo 3 e fornece detalhes sobre procedimentos de serviço.
Manual de serviço cg125 titan ks es kse cg125 cargo (2002) rodatrasThiago Huari
Este documento fornece instruções para serviços relacionados à roda traseira, freio e suspensão. Ele inclui informações sobre diagnóstico de defeitos, especificações, valores de torque, ferramentas necessárias e procedimentos de remoção, inspeção, montagem e instalação.
Manual de serviço ms nx 4 falcon - 00 x6b-mcg-002 manutencThiago Huari
O documento fornece instruções sobre a manutenção de uma motocicleta, incluindo:
1. Uma tabela de manutenção periódica com itens e intervalos de serviço recomendados.
2. Instruções sobre como inspecionar e ajustar itens como o acelerador, afogador, velas de ignição, folga das válvulas, óleo do motor e corrente de transmissão.
3. Especificações técnicas como folga livre do acelerador, tipo de óleo e velas recomendadas.
Este documento é um suplemento de manual de serviço para a motocicleta Honda CBX250 Twister. Ele fornece especificações técnicas, valores de torque, ferramentas recomendadas e procedimentos de manutenção para o modelo CBX250-3, como números de identificação, sistemas elétrico e de alimentação, embreagem, transmissão e demais componentes.
Bobcat t870 compact track loader service repair manual (sn b47 h11001 and above)yhfhjjkdksmme
This document provides a summary of key safety instructions and considerations for servicing a Bobcat skid-steer loader. It emphasizes the importance of reading all manuals, understanding safety signs on the machine, and ensuring correct function of all parts after any repairs or adjustments. Specific areas checked include ROPS/FOPS installation, seat belts, controls, fluid levels, leaks, lubrication, and the condition of safety-related parts. It also notes the need to inspect for unauthorized modifications and check that the interlock system functions properly before returning the machine to the customer.
Bobcat t870 compact track loader service repair manual (sn b47 h11001 and above)fujsefjfkksekem
This document provides a summary of key safety instructions and considerations for servicing a Bobcat skid-steer loader. It emphasizes that service should only be performed after reading and understanding all manuals and following all warnings. General inspections of safety and operational components are recommended after any service or repair work. Fire prevention procedures are also outlined.
This document is a repair manual for the Ares 806 containing several chapters on repair procedures and specifications for various components. Chapter A covers injection system checking procedures, injection feed components and identification, and the Tier II engine. It includes sections on checking procedures, component identification, operating principles, adjustments, removal/refitting, and diagnostic sheets.
Este manual fornece instruções para reparação de caminhões e ônibus com transmissões de 10 a 16 marchas, incluindo procedimentos para desmontagem e montagem de componentes como atuador da embreagem, flange de saída, carcaça do grupo planetário e portador planetário. O documento também lista ferramentas e materiais necessários para os reparos.
Catálogo Peças Honda Biz KS, ES, EX - ano 2011 e 2012w4rh4ck3r
O documento apresenta:
(1) Um catálogo de peças para a motocicleta BIZ 125 com instruções de uso, estrutura do catálogo e tabela de cores;
(2) Informações sobre os modelos, códigos de área e números de série aplicáveis;
(3) Uma amostra da etiqueta de cores com os códigos para peças coloridas.
Este documento fornece instruções para serviços no sistema de freio do modelo CB500, incluindo diagnóstico de defeitos, substituição de pastilhas e fluido de freio, sangria do sistema e remoção e inspeção dos componentes do freio dianteiro e traseiro.
Sistema hidráulico
Os tratores 6110J, 6125J, e 6130J são equipados com um sistema hidráulico de centro aberto com fluxo constante (bomba de engrenagem). Opcionalmente, eles podem ser equipados com um sistema hidráulico de centro fechado de 100 L/min (26,4 gpm) com bomba de pistão.
Os tratores 6145J, 6165J, 6180J e 6205J são equipados com um sistema hidráulico de centro fechado com bomba de pistão como equipamento padrão.
Modelo
Sistema hidráulico
Vazão da bomba, L/min (gpm)
6110J
Centro aberto com bomba de engrenagens (padrão)
Centro fechado com pistão de bomba (opcional)
65 (17,1) (padrão)
100 (26,4) (opcional)
6125J
Centro aberto com bomba de engrenagens (padrão)
Centro fechado com pistão de bomba (opcional)
65 (17,1) (padrão)
100 (26,4) (opcional)
6130J
Centro aberto com bomba de engrenagens (padrão)
Centro fechado com pistão de bomba (opcional)
65 () (padrão)
100 (26,4) (opcional)
6145J
Centro fechado com pistão de bomba
100 (26,4)
6165J
Centro fechado com pistão de bomba
110 (29)
6180J
Centro fechado com pistão de bomba
110 (29)
6205J
Centro fechado com pistão de bomba
110 (29)
Uma bomba única com detecção de carga fornece o óleo para o circuito da direção, levante de 3 pontos, válvulas de controle remoto (VCRVCR) e sistema de direção.
O fluxo gerado pela bomba é direcionado para o circuito de direção através de uma válvula de prioridade. O volume de óleo enviado para o sistema de direção é controlado por uma válvula de detecção de carga que identifica a carga a que as rodas direcionais são submetidas. Assim, o sistema fornece ao circuito da direção o fluxo necessário para o volante, sempre garantindo que somente a direção mínima seja necessária, independentemente da carga suportada pelo eixo dianteiro.
Da mesma forma, o circuito de direção, levante de 3 pontos, e módulo de VCR possuem um sistema de detecção de carga que controla a válvula proporcional. Dessa forma, a bomba fornece ao levante de 3 pontos e à VCR somente o fluxo nec
Este documento fornece instruções para serviços na roda traseira e suspensão da motocicleta Honda CR125R, incluindo: remoção e inspeção da roda traseira, diagnóstico de defeitos na suspensão, especificações técnicas e valores de torque recomendados.
Este documento fornece instruções para serviços na roda traseira e suspensão de uma motocicleta Honda CR250R, incluindo especificações técnicas, torques de fixação, ferramentas necessárias e procedimentos para inspeção, remoção, montagem e diagnóstico de defeitos.
O documento fornece instruções sobre como usar o manual de serviço para motocicletas Honda, descrevendo procedimentos de manutenção, especificações técnicas e torque de fixação.
Manual de serviço cg150 titan ks es esd manivelaThiago Huari
O documento fornece especificações e instruções para serviços relacionados à árvore de manivelas, transmissão e conjunto de partida de uma motocicleta CG125, incluindo a separação das carcaças do motor, inspeção dos componentes, substituição de rolamentos e montagem.
Este catálogo lista retentores para motos de várias marcas como Honda, Yamaha e Agrale. Fornece as medidas, local de aplicação e modelo de moto para cada retentor. Contém mais de 100 itens para garantir a fixação de peças como árvores de manivelas, cubos de roda e amortecedores em diversos modelos.
- O manual descreve os procedimentos de serviço para a motocicleta VT750C Shadow 750 de 2009, incluindo especificações, valores de torque, pontos de lubrificação e diagrama elétrico.
- Ele fornece instruções detalhadas para a remoção e instalação de componentes, manutenção preventiva e solução de problemas.
- O manual está organizado em 23 capítulos cobrindo todos os sistemas da motocicleta.
YALE H813 GP-GLP-GDP 090 LIFT TRUCK Service Repair Manualuekjmd kmwsed
This is the Highly Detailed factory service repair manual for theYALE H813 GP-GLP-GDP 090 LIFT TRUCK, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.YALE H813 GP-GLP-GDP 090 LIFT TRUCK Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
Frame
Operator's cab
Gm 4.3l v-6 engines
Kubota engine repair
Kubota diesel 3.6l engine
Cooling system
Lpg fuel system gm 4.3l engine with psi
Gasoline fuel system
1 and 2 sp ps transmission repair
Drive axle - dry brake
Drive axle and differential assembly repair
Steering axle
Brake system
Wet brakes - nmhg
Hydraulic gear pump
Hydraulic cleanliness procedures
Main control valve
Cylinder repair (mast s/n a551, a555, a559, a661, a662, a663, a66, b507,
B508, b509, b551, b555, b559, b562, b563, b564, b661, b662, b663, c515,
C551, c555, c559, d507, d508, d509, d515, d562, d563, d564, e509, and e564)
High voltage switch (hvs) ignition
Wire harness repair
User interface
Electrical system
Mast repairs (s/n a513, a514, a613, a614, a702, a703, a704, a705, a706,
A707, a751, a752, b513, b514, b586, b587, b588, b589, b590, b591, b749, b750, b751, b752, b753, b754)
Metric and inch (sae) fasteners
Calibration procedures
Periodic maintenance
Capacities and specifications
Diagrams and schematics
Diagnostic troubleshooting manual
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveYALE H813 GP-GLP-GDP 090 LIFT TRUCK Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
Manaul de serviço ms cbx250 (2006) 00 x6b-kpf-003 01. informaçõesThiago Huari
1. O documento fornece especificações técnicas detalhadas para vários componentes e sistemas de uma motocicleta, incluindo dimensões, peso, capacidades, especificações do motor, transmissão, suspensão, freios e sistemas elétricos.
2. São listados os padrões e limites de uso para diversas peças do motor, como pistão, biela, cabeçote, válvulas, embreagem, entre outros.
3. Instruções gerais sobre manutenção, ferramentas, números de
Massey ferguson mf290 xtra tractors (india) parts catalogue manualudjjjskkdmme
This document contains parts listings and technical specifications for engine components of Massey Ferguson 275/290 XTRA tractors. It includes sections for the engine, cylinder block, crankshaft, pistons, cylinder head, intake/exhaust valves, camshaft, cylinder head cover, and timing gear housing. Each section lists the relevant parts, quantities, descriptions, and any additional comments needed to identify application or revisions.
Manual de serviço cg150 titan ks es esd informacThiago Huari
Este manual fornece instruções sobre a manutenção de motocicletas CG125 produzidas a partir de 2002, dividido em 20 capítulos que descrevem os sistemas e componentes da motocicleta. O manual destaca a importância da manutenção preventiva de acordo com a tabela do capítulo 3 e fornece detalhes sobre procedimentos de serviço.
Manual de serviço cg125 titan ks es kse cg125 cargo (2002) rodatrasThiago Huari
Este documento fornece instruções para serviços relacionados à roda traseira, freio e suspensão. Ele inclui informações sobre diagnóstico de defeitos, especificações, valores de torque, ferramentas necessárias e procedimentos de remoção, inspeção, montagem e instalação.
Manual de serviço ms nx 4 falcon - 00 x6b-mcg-002 manutencThiago Huari
O documento fornece instruções sobre a manutenção de uma motocicleta, incluindo:
1. Uma tabela de manutenção periódica com itens e intervalos de serviço recomendados.
2. Instruções sobre como inspecionar e ajustar itens como o acelerador, afogador, velas de ignição, folga das válvulas, óleo do motor e corrente de transmissão.
3. Especificações técnicas como folga livre do acelerador, tipo de óleo e velas recomendadas.
Este documento é um suplemento de manual de serviço para a motocicleta Honda CBX250 Twister. Ele fornece especificações técnicas, valores de torque, ferramentas recomendadas e procedimentos de manutenção para o modelo CBX250-3, como números de identificação, sistemas elétrico e de alimentação, embreagem, transmissão e demais componentes.
Bobcat t870 compact track loader service repair manual (sn b47 h11001 and above)yhfhjjkdksmme
This document provides a summary of key safety instructions and considerations for servicing a Bobcat skid-steer loader. It emphasizes the importance of reading all manuals, understanding safety signs on the machine, and ensuring correct function of all parts after any repairs or adjustments. Specific areas checked include ROPS/FOPS installation, seat belts, controls, fluid levels, leaks, lubrication, and the condition of safety-related parts. It also notes the need to inspect for unauthorized modifications and check that the interlock system functions properly before returning the machine to the customer.
Bobcat t870 compact track loader service repair manual (sn b47 h11001 and above)fujsefjfkksekem
This document provides a summary of key safety instructions and considerations for servicing a Bobcat skid-steer loader. It emphasizes that service should only be performed after reading and understanding all manuals and following all warnings. General inspections of safety and operational components are recommended after any service or repair work. Fire prevention procedures are also outlined.
Bobcat a770 skid steer loader service repair manual (sn b3 bu11001 and above)jfjskeksemmmd
This service manual provides maintenance and repair instructions for Bobcat skid-steer loaders. It outlines safety procedures and contains sections on hydraulic, hydrostatic, drive, electrical and other systems. Serial numbers for the loader and engine are located on the mainframe and engine, respectively. Delivery inspection reports should be completed to document the condition of new equipment.
Bobcat a770 skid steer loader service repair manual (sn b3 bu11001 and above)fjjskefksmm
This service manual provides maintenance and repair instructions for Bobcat skid-steer loaders. It outlines safety procedures and contains sections on hydraulic, hydrostatic, drive, electrical and other systems. Serial numbers for the loader and engine are located on the mainframe and engine, respectively. Delivery reports should be filled out when a new loader is received.
Bobcat s550 skid steer loader service repair manual (sn ahgm11001 and above)fujsjefjwekskemm
This service manual provides maintenance and repair procedures for Bobcat loaders and their systems. It is intended for use by Bobcat mechanics and covers servicing instructions that require technical training. Safety must be followed when performing any maintenance or repairs. Serial numbers for the loader and engine are included to identify the specific machine.
Bobcat s160 skid steer loader service repair manual (sn a3 l311001 and above)fujsekfksemmaq
This document provides a service manual for a Bobcat S160 skid-steer loader. It includes sections on safety and maintenance, hydraulic systems, hydrostatic systems, drive systems, mainframe, electrical systems, engine service, and heating, ventilation, and air conditioning. It also includes specifications, an index, and information on serial numbers, delivery reports, and loader identification. The manual instructs technicians to follow all safety precautions when servicing equipment and ensure all components are in good working order before returning loaders to service.
Bobcat s160 skid steer loader service repair manual (sn a3 l411001 and above)fujsekfksemmaq
This document provides a service manual for a Bobcat S160 skid-steer loader. It includes sections on safety and maintenance, hydraulic systems, hydrostatic systems, drive systems, mainframe, electrical systems, engine service, and heating, ventilation, and air conditioning. It also includes specifications, an index, and information on serial numbers, delivery reports, and loader identification. The manual instructs technicians to follow all safety precautions when servicing equipment and ensure all components are in good working order before returning loaders to service.
This document provides safety instructions and guidelines for operating and servicing a Bobcat skid-steer loader. It emphasizes the importance of reading all manuals and following all safety warnings and instructions. Operators and service technicians must be trained, as failure to follow safety procedures can result in injury or death. The document outlines specific safety checks that should be performed after service or repairs to ensure proper and safe operation.
This document provides safety instructions and guidelines for operating and servicing a Bobcat skid-steer loader. It emphasizes the importance of reading all manuals and following all safety warnings and instructions. Operators and service technicians must be trained, as failure to follow safety procedures can result in injury or death. The document outlines specific safety checks that should be performed after service or repairs to ensure proper and safe operation.
Similar to Bobcat t870 compact track loader service repair manual (sn b47 l11001 and above) (9)
Hyster e019 (h13.00 xm europe) forklift service repair manualfusjfjsekemwer
This document provides instructions for repairing the frame, counterweight, fenders, hood, hydraulic and fuel tanks, radiator/cooling section, operator compartment, and cab of certain Caterpillar lift trucks. It describes removing and installing the counterweight, which requires a crane due to its heavy weight. Procedures are provided for removing and installing fenders, the hood and air cleaner assembly, and the hydraulic tank. The document emphasizes safety precautions when working on or near heavy components, and when welding or using chemicals during the repair process.
Hyster d005 (h100 e americas) forklift service repair manualfusjfjsekemwer
1) The document provides information on servicing gear pumps used in hydraulic systems. It describes the components and operation of single-stage and tandem gear pumps.
2) The repair process begins with removing the pump, disassembling it, cleaning and inspecting parts. Worn seals are a common cause of failure. Replacement seals are recommended even for parts in good condition.
3) Reassembly involves lubricating parts and installing them back into the pump housings. Proper cleaning and care is important to prevent dirt from damaging parts or entering the hydraulic system.
Hyster c215 (w45 z) forklift service repair manualfusjfjsekemwer
The document provides instructions for repairing frames on forklifts. It describes the main components that attach to the frame, including the lifting mechanism, electrical system, hydraulic pump, and master drive unit. Procedures are outlined for separating a fork frame or drive unit frame if damaged while the rest of the truck is still usable. The steps include removing pins and carefully separating the frames. Reassembly involves replacing the pins in reverse order. Safety warnings are also provided.
Caterpillar cat 322 c l 322cl excavator (prefix bkm) service repair manual (b...fusjfjsekemwer
This document provides instructions for removing and installing fuel system components on a Caterpillar 322C excavator with a 3126 engine. It describes removing and installing the fuel priming pump, primary fuel filter, fuel transfer pump, and fuel shutoff solenoid. Detailed steps and illustrations are provided for each procedure, and tools required are listed. Technicians are advised to keep components clean and contain fluids to prevent contamination.
Caterpillar cat 320 c s excavator (prefix bea) service repair manual (bea0000...fusjfjsekemwer
The document provides instructions for removing and disassembling the stick drift reduction valve on a 320C excavator. It lists the required tools and outlines 7 steps to disassemble the valve, including removing bolts, fittings, seals, springs, and spools. Safety warnings are provided regarding relieving hydraulic pressure before disassembly and preventing contamination of hydraulic components.
Caterpillar cat 320 c s excavator (prefix bbl) service repair manual (bbl0000...fusjfjsekemwer
This document provides instructions for assembling the F4 auxiliary control valve on 320C excavator models. It lists the required tools and notes on cleanliness. The steps include installing O-rings, springs, and other components in the proper order and orientation. Finally, it states to install the F4 auxiliary control valve by referring to another document providing full installation instructions.
Caterpillar cat 320 c ln excavator (prefix bbl) service repair manual (bbl000...fusjfjsekemwer
This document provides installation instructions for auxiliary control valves on a 320C excavator. It describes:
1) Installing the F1 and F4 auxiliary control valves together using existing mount bolts and connecting hoses and electrical connections.
2) Connecting pilot lines, electrical connectors, and tubes to complete the installation of the control valves.
3) Installing panels, filters, and covers to finish the assembly.
This document provides instructions for removing and installing inlet and exhaust valve springs on Caterpillar 3064 and 3066 engines. The procedure involves using several specialized tools to compress the valve springs so that the valve keepers can be removed and installed without removing the cylinder head. Air pressure is applied to the cylinder to hold the valves in position while the springs are worked on individually. Proper compression of the springs is important to avoid damaging the valve stems.
This document provides instructions for disassembling and assembling the piston pump of a 216B3 Skid Steer Loader. It lists 71 steps to fully disassemble the pump by removing components like fittings, springs, seals, bearings, pins and plates. The assembly section lists 8 steps such as installing liners, seals, bearings and shafts. Tools required are also listed.
The document provides instructions for removing and installing an exhaust manifold on a 216B3 Skid Steer Loader with a C2.2 engine. The removal procedure involves loosening fasteners, removing the exhaust manifold and gasket. The installation procedure involves cleaning surfaces, installing a new gasket, aligning and installing the exhaust manifold, and tightening fasteners to the specified torque. Safety notices are provided regarding keeping parts clean and preventing damage.
This document provides instructions for disassembling and assembling the piston motor of a 216B3 Skid Steer Loader. The disassembly process involves removing 25 parts from the motor in a specific order, taking care when removing springs. The assembly process reverses the disassembly steps, heating some parts before installing and using tools to install retaining rings and shafts.
This document provides assembly instructions for a piston pump in a 216B3 skid steer loader. It outlines 78 steps to assemble components like bearings, seals, pins, springs and plates. Special tools are required and parts must be installed in the correct orientation. Measurements taken during disassembly must be matched. The process involves pressing, torquing and installing retaining rings and seals. Finally, the assembled piston pump is installed back into the skid steer loader.
This document provides removal and installation instructions for a turbocharger and exhaust manifold on a 216B2 Skid Steer Loader with a 3024C engine. The turbocharger removal procedure involves removing hoses, bolts, tubes and gaskets. The exhaust manifold removal involves loosening nuts and bolts, removing the manifold and gasket, and possibly studs. Cleaning and inspection steps are outlined. Reinstallation involves cleaning, installing new gaskets, bolts and nuts in the specified order and torque. Valve spring removal and installation procedures are also summarized requiring the use of special tools.
Caterpillar cat 216 b skid steer loader (prefix rll) service repair manual (r...fusjfjsekemwer
This document provides instructions for installing the engine oil pump on a 216B skid steer loader. It describes:
1) Using an alignment tool to install the idler hub into the cylinder block.
2) Lubricating and installing various pump components like the inner rotor and idler gear.
3) Installing retaining rings and checking end play with a feeler gauge.
4) Reinstalling components like the oil strainer if removed previously.
This document provides instructions for removing and installing various components on a Caterpillar 216 Skid Steer Loader, including:
- Removing and installing the gas spring that supports the cab. Precautions are listed to safely release the spring force.
- Removing the fuel transfer pump, including disconnecting fuel lines and removing mounting bolts.
- Removing the fuel injection lines by disconnecting unions at the nozzles and pump, removing banjo bolts, washers and nuts. Identification marks should be made for reinstallation.
Case ih stx 430 tractor service repair manualfusjfjsekemwer
This document provides a master table of contents for a service manual covering STX and Steiger series tractors. It lists the tractor models covered, notes that engine repair information is in separate manuals, and outlines the sections and subsections contained in the service manual books, including specifications, lubrication/maintenance, engine removal/installation, and air induction system for certain tractor models.
Case ih puma 240 cvt tier 4 b (final) tractor service repair manualfusjfjsekemwer
This service manual provides information for servicing the Case IH PUMA® 185 CVT, PUMA® 185, PUMA® 200 CVT, PUMA® 200, PUMA® 220 CVT, PUMA® 220, and PUMA® 240 CVT tractors. The manual covers systems of the tractor such as the engine, transmission, axles, hydraulics, pneumatics, electrical systems, and more. Each system section includes detailed component information, diagrams, and specifications to aid technicians in maintenance and repair of the tractors.
Case 1021 g stage iv wheel loader service repair manualfusjfjsekemwer
This service manual document provides information on servicing wheel loaders, including engine service. It includes specifications for 1121G and 1021G wheel loader models with Tier 4B engines. The document covers removing and servicing the engine and crankcase, as well as fuel, air intake, cooling, lubrication and emissions systems. Safety procedures and instructions are provided throughout.
Case 921 g wheel loader xr eh, new cab tier4b wheel loader service repair manualfusjfjsekemwer
This document is a service manual for CNH Industrial wheel loaders models 821G and 921G. It contains sections covering the engine, transmission, four-wheel drive system, front and rear axle systems, brakes and controls, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, and electrical systems. Safety precautions are provided to prevent injury when servicing the equipment.
New holland w170 d zbar tier4b wheel loader service repair manualfusjfjsekemwer
This document is a service manual for wheel loaders models W130D and W170D. It contains information on engine systems, transmission, four-wheel drive system, front and rear axle systems, brakes and controls, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, and electrical systems. The manual provides maintenance and repair instructions for technicians and is organized by system with section numbers for easy reference.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
2. 1-1 T870 Service Manual
MAINTENANCE SAFETY
Never service the Bobcat Skid-
Steer Loader without instructions.
Have good ventilation when
welding or grinding painted
parts.
Wear dust mask when grinding
painted parts. Toxic dust and gas
can be produced.
Avoid exhaust fume leaks which
can kill without warning. Exhaust
system must be tightly sealed.
Stop, cool and clean engine of
flammable materials before
checking fluids.
Never service or adjust loader
with the engine running unless
instructed to do so in the
manual.
Avoid contact with leaking
hydraulic fluid or diesel fuel
under pressure. It can penetrate
the skin or eyes.
Never fill fuel tank with engine
running, while smoking or when
near open flame.
Disconnecting or loosening any
hydraulic tubeline, hose, fitting,
component or a part failure can
cause lift arms to drop. Do not go
under lift arms when raised
unless supported by an
approved lift arm support device.
Replace it if damaged.
Keep body, jewelry and clothing
away from moving parts,
electrical contact, hot parts and
exhaust.
Wear eye protection to guard
from battery acid, compressed
springs, fluids under pressure
and flying debris when engines
are running or tools are used.
Use eye protection approved for
type of welding.
Keep rear door closed except for
service. Close and latch door
before operating the loader.
Never work on loader with lift
arms up unless lift arms are held
by an approved lift arm support
device. Replace if damaged.
Never modify equipment or add
attachments not approved by
Bobcat Company.
Lead-acid batteries produce
flammable and explosive gases.
Keep arcs, sparks, flames and
lighted tobacco away from
batteries.
Batteries contain acid which
burns eyes or skin on contact.
Wear protective clothing. If acid
contacts body, flush well with
water. For eye contact flush well
and get immediate medical
attention.
Use the correct procedure to lift or
lower operator cab.
Cleaning and maintenance are
required daily.
MSW40-0609
WRONG
B-6589
P-90216
CORRECT
NA1711
CORRECT
NA1715
CORRECT
NA1712
WRONGWRONG
NA1710
WRONG
NA1714
WRONG
NA1722
WRONG
NA1725
WARNING
Instructions are necessary before operating or servicing machine. Read and
understand the Operation & Maintenance Manual, Operator’s Handbook and
signs (decals) on machine. Follow warnings and instructions in the manuals
when making repairs, adjustments or servicing. Check for correct function after
adjustments, repairs or service. Untrained operators and failure to follow
instructions can cause injury or death. W-2003-0807
Maintenance procedures which are given in the Operation & Maintenance Manual can be performed by the owner/
operator without any specific technical training. Maintenance procedures which are not in the Operation & Maintenance
Manual must be performed ONLY BY QUALIFIED BOBCAT SERVICE PERSONNEL. Always use genuine Bobcat
replacement parts. The Service Safety Training Course is available from your Bobcat dealer.
Safety Alert Symbol: This symbol with a warning statement, means: “Warning, be alert! Your safety is
involved!” Carefully read the message that follows.
3 of 946
DealerCopy--NotforResale
5. 1-7 T870 Service Manual
FOREWORD
This manual is for the Bobcat loader mechanic. It provides necessary servicing and adjustment
procedures for the Bobcat loader and its component parts and systems. Refer to the Operation &
Maintenance Manual for operating instructions, starting procedure, daily checks, etc.
A general inspection of the following items must be made after the loader has had service or repair:
FW SSL-0617 SM
1. Check that the ROPS/FOPS
(Including side screens) is in
good condition and is not
modified.
9. The parking brake must
function correctly.
2. Check that ROPS mounting
hardware is tightened and is
Bobcat approved.
10. Enclosure door latches must
open and close freely.
3. The seat belt must be
correctly installed, functional
and in good condition.
11. Bob-Tach® wedges and
linkages must function
correctly and be in good
condition.
4. The seat bar must be
correctly adjusted, clean and
lubricated.
12. Safety treads must be in good
condition.
5. Check lift arm support device,
replace if damaged.
13. Check for correct function of
indicator lamps.
6. Machine signs (decals) must
be legible and in the correct
location.
14. Check all machine fluid
levels.
7. Steering levers, hand controls
and foot pedals must return to
neutral (as applicable).
15. Inspect for fuel, oil or
hydraulic fluid leaks.
8. Check for correct function of
the work lights.
16. Lubricate the loader.
SAFETY &
DRIVE
HVAC
SYSTEM
9 of 946
DealerCopy--NotforResale
6. 1-8 T870 Service Manual
FW SSL-0617 SM
17. Check the condition of the
battery and cables.
23. Operate the machine and
check all functions.
18. Inspect the air cleaner for
damage or leaks. Check the
condition of the element.
24. Check for correct function of
the Bobcat Interlock Control
System (BICS™) before the
machine is returned to the
customer.
19. Check the electrical charging
system.
25. Check for proper function of
front horn and back-up alarm
(if equipped).
20. Check tires for wear and
pressure. Check tracks for
wear and tension. Use only
approved tires or tracks.
26. Check function or condition of
all equipped options and
accessories (examples: fire
extinguisher, rotating beacon,
lift kits, etc.).
21. Inspect for loose or broken
parts or connections.
27. Recommend to the owner
that all necessary corrections
be made before the machine
is returned to service.
22. Check for any field
modification not completed.
CALIFORNIA
PROPOSITION 65 WARNING
Diesel engine exhaust and some of its
constituents are known to the state of California
to cause cancer, birth defects and other
reproductive harm.
10 of 946
DealerCopy--NotforResale
7. 1-9 T870 Service Manual
SAFETY INSTRUCTIONS
WARNING
AVOID INJURY OR DEATH
Instructions are necessary before operating or
servicing machine. Read and understand the
Operation & Maintenance Manual, Operator’s
Handbook and signs (decals) on machine. Follow
warnings and instructions in the manuals when
making repairs, adjustments or servicing. Check for
correct function after adjustments, repairs or
service. Untrained operators and failure to follow
instructions can cause injury or death.
W-2003-0807
IMPORTANT
This notice identifies procedures which must be
followed to avoid damage to the machine.
I-2019-0284
DANGER
The signal word DANGER on the machine and in the
manuals indicates a hazardous situation which, if not
avoided, will result in death or serious injury.
D-1002-1107
WARNING
The signal word WARNING on the machine and in the
manuals indicates a potentially hazardous situation
which, if not avoided, could result in death or serious
injury.
W-2044-1107
The following publications provide information on the safe
use and maintenance of the Bobcat machine and
attachments:
• The Delivery Report is used to assure that complete
instructions have been given to the new owner and
that the machine is in safe operating condition.
• The Operation & Maintenance Manual delivered with
the machine or attachment contains operating
information as well as routine maintenance and
service procedures. It is a part of the machine and can
be stored in a container provided on the machine.
Replacement Operation & Maintenance Manuals can
be ordered from your Bobcat dealer.
• Machine signs (decals) instruct on the safe operation
and care of your Bobcat machine or attachment. The
signs and their locations are shown in the Operation
& Maintenance Manual. Replacement signs are
available from your Bobcat dealer.
• An Operator’s Handbook fastened to the operator
cab. It’s brief instructions are convenient to the
operator. The handbook is available from your dealer
in an English edition or one of many other languages.
See your Bobcat dealer for more information on
translated versions.
• The AEM Safety Manual delivered with the machine
gives general safety information.
• The Service Manual and Parts Manual are available
from your dealer for use by mechanics to do shop-
type service and repair work.
• The Skid-Steer Loader Operator Training Course is
available through your local dealer or at bobcat.com/
training or bobcat.com. This course is intended to
provide rules and practices of correct operation of the
skid-steer loader. The course is available in English
and Spanish versions.
• Service Safety Training Courses are available from
your Bobcat dealer or at bobcat.com/training or
bobcat.com. They provide information for safe and
correct service procedures.
• The Skid-Steer Loader Safety Video is available from
your Bobcat dealer or at bobcat.com/training or
bobcat.com.
SI SSL-1016 SM
This symbol with a warning statement means:
“Warning, be alert! Your safety is involved!”
Carefully read the message that follows.
Safety Alert Symbol
11 of 946
DealerCopy--NotforResale
8. 1-11 T870 Service Manual
FIRE PREVENTION
Maintenance
The machine and some attachments have components
that are at high temperatures under normal operating
conditions. The primary source of high temperatures is
the engine and exhaust system. The electrical system, if
damaged or incorrectly maintained, can be a source of
arcs or sparks.
Flammable debris (leaves, straw, etc.) must be removed
regularly. If flammable debris is allowed to accumulate, it
can cause a fire hazard. Clean often to avoid this
accumulation. Flammable debris in the engine
compartment is a potential fire hazard.
The operator’s area, engine compartment and engine
cooling system must be inspected every day and cleaned
if necessary to prevent fire hazards and overheating.
All fuels, most lubricants and some coolants mixtures are
flammable. Flammable fluids that are leaking or spilled
onto hot surfaces or onto electrical components can
cause a fire.
Operation
Do not use the machine where exhaust, arcs, sparks or
hot components can contact flammable material,
explosive dust or gases.
Electrical
Check all electrical wiring and connections for damage.
Keep the battery terminals clean and tight. Repair or
replace any damaged part or wires that are loose or
frayed.
Battery gas can explode and cause serious injury. Use
the procedure in the Operation & Maintenance Manual
for connecting the battery and for jump starting. Do not
jump start or charge a frozen or damaged battery. Keep
any open flames or sparks away from batteries. Do not
smoke in battery charging area.
Hydraulic System
Check hydraulic tubes, hoses and fittings for damage
and leakage. Never use open flame or bare skin to check
for leaks. Hydraulic tubes and hoses must be properly
routed and have adequate support and secure clamps.
Tighten or replace any parts that show leakage.
Always clean fluid spills. Do not use gasoline or diesel
fuel for cleaning parts. Use commercial nonflammable
solvents.
Fueling
Stop the engine and let it cool before adding fuel. No
smoking! Do not refuel a machine near open flames or
sparks. Fill the fuel tank outdoors.
Ultra Low Sulfur Diesel (ULSD) poses a greater static
ignition hazard than earlier diesel formulations with
higher Sulfur content. Avoid death or serious injury from
fire or explosion. Consult with your fuel or fuel system
supplier to ensure the delivery system is in compliance
with fueling standards for proper grounding and bonding
practices.
Starting
Do not use ether or starting fluids on any engine that has
glow plugs or air intake heater. These starting aids can
cause explosion and injure you or bystanders.
Use the procedure in the Operation & Maintenance
Manual for connecting the battery and for jump starting.
Spark Arrester Exhaust System
The spark arrester exhaust system is designed to control
the emission of hot particles from the engine and exhaust
system, but the muffler and the exhaust gases are still
hot.
Check the spark arrester exhaust system regularly to
make sure it is maintained and working properly. Use the
procedure in the Operation & Maintenance Manual for
cleaning the spark arrester muffler (if equipped).
SI SSL-1016 SM
13 of 946
DealerCopy--NotforResale
9. 1-12 T870 Service Manual
FIRE PREVENTION (CONT’D)
Welding And Grinding
Always clean the machine and attachment, disconnect
the battery, and disconnect the wiring from the Bobcat
controllers before welding. Cover rubber hoses, battery
and all other flammable parts. Keep a fire extinguisher
near the machine when welding.
Have good ventilation when grinding or welding painted
parts. Wear dust mask when grinding painted parts.
Toxic dust or gas can be produced.
Dust generated from repairing nonmetallic parts such as
hoods, fenders or covers can be flammable or explosive.
Repair such components in a well ventilated area away
from open flames or sparks.
Fire Extinguishers
Know where fire extinguishers and first aid kits are
located and how to use them. Inspect the fire
extinguisher and service the fire extinguisher regularly.
Obey the recommendations on the instructions plate.
SI SSL-1016 SM
14 of 946
DealerCopy--NotforResale
10. 1-13 T870 Service Manual
SERIAL NUMBER LOCATIONS
Always use the serial number of the loader when
requesting service information or when ordering parts.
Earlier or later models (identification made by serial
number) may use different parts, or there may be
different procedures to follow when performing a specific
service operation.
Loader Serial Number
Figure 1
The loader serial number plate (Item 1) [Figure 1] is
located on the outside of the loader frame.
Engine Serial Number
Figure 2
The engine serial number (Item 1) [Figure 2] is located
on the side of the engine above the oil filter.
DELIVERY REPORT
Figure 3
The delivery report [Figure 3] contains a list of items that
must be explained or shown to the owner or operator by
the dealer when the Bobcat loader is delivered.
The delivery report must be reviewed and signed by the
owner or operator and the dealer.
P-90642E
1
P121092A
1
NA3106
15 of 946
DealerCopy--NotforResale
11. 1-14 T870 Service Manual
LOADER IDENTIFICATION
[A] Bucket – Several different buckets and other attachments are available for the Bobcat loader.
[B] ROPS – Roll-Over Protective Structure per ISO 3471 and FOPS – Falling-Object Protective Structure per ISO 3449,
Level I. Level II is available.
ITEM DESCRIPTION ITEM DESCRIPTION
1
Operation & Maintenance Manual and Operator’s
Handbook
11 Lift Cylinder (Both Sides)
2 Front Lights 12 Rear Grille
3 Grab Handles 13 Back-up Alarm
4 Operator Seat with Seat Belt and Seat Bar 14 Rear Work Lights and Taillights
5 Tilt Cylinders 15 Rear Door
6
Bucket [A]
16
Rear Tie-down (Both Sides) Front Tie-downs
located behind Bucket
7 Bucket Steps 17 Track
8 Step 18 Lift Arm Support Device
9 Alternate Front Tie-down (Both Sides) 19 Lift Arm
10 Front Auxiliary Quick Couplers 20 Operator Cab (ROPS and FOPS) [B]
NA13640
NA13639
2
3
1
4
5
6
7 8
15
14
13
12
11 20
19
18
17
16
9
10
16 of 946
DealerCopy--NotforResale
14. 10-10-1 T870 Service Manual
LIFTING AND BLOCKING THE LOADER
Procedure
Figure 10-10-1
WARNING
AVOID INJURY OR DEATH
Instructions are necessary before operating or
servicing machine. Read and understand the
Operation & Maintenance Manual, Operator’s
Handbook and signs (decals) on machine. Follow
warnings and instructions in the manuals when
making repairs, adjustments or servicing. Check for
correct function after adjustments, repairs or
service. Untrained operators and failure to follow
instructions can cause injury or death.
W-2003-0807
Read the Removal and Installation, Disassembly and
Assembly, etc. completely to become familiar with the
procedure before beginning [Figure 10-10-1].
Always park the loader on a level surface.
WARNING
MACHINE FALLING OR MOVING CAN CAUSE
SERIOUS INJURY OR DEATH
Put jackstands under the front and rear of the
machine before running engine for service.
W-2718-0208
Figure 10-10-2
Lift the rear of the loader and install jackstands in the
notched area of the frame (Item 1) [Figure 10-10-2].
Figure 10-10-3
Lift the front of the loader and install jackstands under the
front edge of the loader [Figure 10-10-3].
NOTE: Make sure the jackstands do not touch the
tracks. Make sure the tracks clear the floor or
any obstacles.
NOTE: The lift arms are raised for photo clarity.
B-7023A
P127657
1
P127658
19 of 946
DealerCopy--NotforResale
15. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
16. 10-20-1 T870 Service Manual
LIFT ARM SUPPORT DEVICE
Description
WARNING
Never work on a machine with the lift arms up unless
the lift arms are secured by an approved lift arm
support device. Failure to use an approved lift arm
support device can allow the lift arms or attachment
to fall and cause injury or death.
Service lift arm support device if damaged or if parts
are missing. Using a damaged lift arm support or
with missing parts can cause lift arms to drop
causing injury or death.
W-2572-0407
Figure 10-20-1
The lift arm support device (Item 1) [Figure 10-20-1] is
used to support the lift arms while working on a machine
with the lift arms up.
A decal (Item 2) [Figure 10-20-1] located on the right
side of the operator cab provides instructions for
installing and removing the lift arm support device.
The procedures are described in more detail on the
following pages. (See Installing on Page 10-20-2.) and
(See Removing on Page 10-20-3.)
P121445
1
2
21 of 946
DealerCopy--NotforResale
17. 10-20-2 T870 Service Manual
LIFT ARM SUPPORT DEVICE (CONT’D)
Installing
DANGER
P-90328
AVOID DEATH
• Disconnecting or loosening any hydraulic
tubeline, hose, fitting, component or a part failure
can cause lift arms to drop.
• Keep out of this area when lift arms are raised
unless supported by an approved lift arm
support. Replace if damaged.
D-1009-0409
Remove attachment from the loader. (See Operation And
Maintenance Manual.)
Figure 10-20-2
Put jackstands under the rear corners of the loader frame
(Inset) [Figure 10-20-2].
Remove the lift arm support device (Item 1) [Figure 10-
20-2] from the storage position.
The operator must stay in the operator seat with the seat
belt fastened and the seat bar lowered until the lift arm
support device is installed.
Start the engine and raise the lift arms all the way up.
Figure 10-20-3
Have a second person install the lift arm support device
over the rod of one of the lift cylinders [Figure 10-20-3].
The lift arm support device must be tight against the
cylinder rod.
Figure 10-20-4
Lower the lift arms slowly until the lift arm support device
is held between the lift arms and the lift cylinder. The tabs
of the lift arm support device must go past the end of the
cylinder (Inset) [Figure 10-20-4].
P-90672P127599A
1
P-90677
P-90640A
P100399
22 of 946
DealerCopy--NotforResale
18. 10-20-3 T870 Service Manual
LIFT ARM SUPPORT DEVICE (CONT’D)
Removing
DANGER
P-90328
AVOID DEATH
• Disconnecting or loosening any hydraulic
tubeline, hose, fitting, component or a part failure
can cause lift arms to drop.
• Keep out of this area when lift arms are raised
unless supported by an approved lift arm
support. Replace if damaged.
D-1009-0409
The operator must be in the operator’s seat, with the seat
belt fastened and seat bar lowered, until the lift arm
support device is removed, and the lift arms are lowered
all the way.
NOTE: The lift arm support device should remain
resting on the cylinder barrel when the lift
arms are raised. Service or replace the lift arm
support device if the lift arm support raised
with the cylinder rod.
Start the engine and raise the lift arms all the way up.
Figure 10-20-5
Have a second person remove the lift arm support device
[Figure 10-20-5] after the lift arms are all the way up.
Lower the lift arms all the way and stop the engine.
Figure 10-20-6
Return the lift arm support device to the storage position
and secure with the clamping knobs [Figure 10-20-6].
Remove the jackstands.
P-90677
P121445
23 of 946
DealerCopy--NotforResale