Best rebar location and mapping?
•
1 like•1,664 views
Ground Penetrating Radar (GPR) Concrete Imaging can produce high resolution results far superior to that offered by most other techniques. Using a high frequency antennas (typically with a central frequency in the range 2.6GHz to 1.5GHz) metallic and non-metallic objects and features can be detected at depths of up to 500mm.
Report
Share
Report
Share
Download to read offline
Recommended
Miri GA Mini Gas Validation Unit for IVF applications
Miri® GA Mini is a handheld device intended to do spot measurements of CO2 and O2. The Miri® GA Mini can connect to any brand of incubator and is a perfect accessory for spot monitoring on Miri® TL and Miri® Multi-room incubators.
SIMPLE GAS DETECTOR DEVICES - GASCLIP
PSC brings to India simple gas detector devices that does not need calibration or charge. Gas Clip Technologies developed innovative portable gas detectors that offer greater reliability, improved productivity, and better cost-efficiency. Businesses count on these units every day to accurately test for combustible gases, hydrogen sulfide (H2S), carbon monoxide (CO), and oxygen (O2). Our products are designed to withstand the harshest, toughest industries, including oil and gas, utilities, waste water treatment, telecommunications, and marine, among others.
Rough run Oblivious Bloom Intersection
1. The document describes the Oblivious Bloom Intersection protocol for privately comparing sets between a client and server.
2. The client builds a Bloom filter from its set and the server builds garbled Bloom filters (GBFs) from its set using cryptographic techniques.
3. Oblivious transfer is used to retrieve bits from the GBFs to reconstruct the client's Bloom filter, revealing any intersecting elements without revealing non-intersecting elements.
Avida tower bgc project updates as of sep 5, 2013
This document provides inventory reports and updates for several Avida Towers BGC projects as of the first week of September 2013. It reports the total units, units sold, and units available for each project. Additional sections provide graphs of quarterly take-up rates from 2011-2013 and photos of ongoing construction works. The final section outlines various marketing initiatives including ads, events, and sponsorship.
Digital Brix Refractometer by ACMAS Technologies Pvt Ltd.
The digital brix refractometers are highly accurate and precise optical instruments. These digital refratometers use latest and precise optical cells. These refractomers use digital picture processing technique and accurate temperature compensation. Advanced microprocessor is centre of the digital brix refractomer which measure the brix of the liquid with precisions displays as three and half figures number liquid crystal displayer. For More Information Please Logon http://goo.gl/KiMw4K
Concrete Moisture Meter By ACMAS Technologies Pvt. Ltd.
"Moisture meters manufacturer, moisture meter suppliers, moisture meter manufacturer India, moisture meter exporters, moisture meters India, moisture meters, digital moisture meters, moisture meters supplier India, moister meter, moister meters India, digital moister meter suppliers. For More Information Please Logon http://goo.gl/wiqMCh
Glass Moisture Meter by ACMAS Technologies Pvt Ltd.
Weiber Technical Solutions launches its new version of
moisture meter that incorporates a range of design
refinements and highly developed features to bring a
Top Quality 2-in-1 Meter that detect moisture &
temperature.
الموقع العام-Model
The document is an installing diagram for a security system for a lab in Tanta. It includes a list of security equipment such as 16 PTZ cameras, 5 license plate cameras, and fixed cameras along with their housings. It also lists a core switch and access switches that are part of the CCTV system project. The diagram was created by Eng. M. Ibrahem for the Giza Projects Company.
Recommended
Miri GA Mini Gas Validation Unit for IVF applications
Miri® GA Mini is a handheld device intended to do spot measurements of CO2 and O2. The Miri® GA Mini can connect to any brand of incubator and is a perfect accessory for spot monitoring on Miri® TL and Miri® Multi-room incubators.
SIMPLE GAS DETECTOR DEVICES - GASCLIP
PSC brings to India simple gas detector devices that does not need calibration or charge. Gas Clip Technologies developed innovative portable gas detectors that offer greater reliability, improved productivity, and better cost-efficiency. Businesses count on these units every day to accurately test for combustible gases, hydrogen sulfide (H2S), carbon monoxide (CO), and oxygen (O2). Our products are designed to withstand the harshest, toughest industries, including oil and gas, utilities, waste water treatment, telecommunications, and marine, among others.
Rough run Oblivious Bloom Intersection
1. The document describes the Oblivious Bloom Intersection protocol for privately comparing sets between a client and server.
2. The client builds a Bloom filter from its set and the server builds garbled Bloom filters (GBFs) from its set using cryptographic techniques.
3. Oblivious transfer is used to retrieve bits from the GBFs to reconstruct the client's Bloom filter, revealing any intersecting elements without revealing non-intersecting elements.
Avida tower bgc project updates as of sep 5, 2013
This document provides inventory reports and updates for several Avida Towers BGC projects as of the first week of September 2013. It reports the total units, units sold, and units available for each project. Additional sections provide graphs of quarterly take-up rates from 2011-2013 and photos of ongoing construction works. The final section outlines various marketing initiatives including ads, events, and sponsorship.
Digital Brix Refractometer by ACMAS Technologies Pvt Ltd.
The digital brix refractometers are highly accurate and precise optical instruments. These digital refratometers use latest and precise optical cells. These refractomers use digital picture processing technique and accurate temperature compensation. Advanced microprocessor is centre of the digital brix refractomer which measure the brix of the liquid with precisions displays as three and half figures number liquid crystal displayer. For More Information Please Logon http://goo.gl/KiMw4K
Concrete Moisture Meter By ACMAS Technologies Pvt. Ltd.
"Moisture meters manufacturer, moisture meter suppliers, moisture meter manufacturer India, moisture meter exporters, moisture meters India, moisture meters, digital moisture meters, moisture meters supplier India, moister meter, moister meters India, digital moister meter suppliers. For More Information Please Logon http://goo.gl/wiqMCh
Glass Moisture Meter by ACMAS Technologies Pvt Ltd.
Weiber Technical Solutions launches its new version of
moisture meter that incorporates a range of design
refinements and highly developed features to bring a
Top Quality 2-in-1 Meter that detect moisture &
temperature.
الموقع العام-Model
The document is an installing diagram for a security system for a lab in Tanta. It includes a list of security equipment such as 16 PTZ cameras, 5 license plate cameras, and fixed cameras along with their housings. It also lists a core switch and access switches that are part of the CCTV system project. The diagram was created by Eng. M. Ibrahem for the Giza Projects Company.
3D Isomatric View Restaurant
The document describes the building materials and structure for a restaurant based on Chinese architecture. It includes iron pillars, plates, and beams; RCC pillars, beams, and footings; stone walls and slabs; a pitched roof with purlins and struts; tiles; and an iron frame work. The project involves constructing a restaurant with a covered area of 1850 square feet on a land area of 1100 square feet in Ajmer, India.
Trussteel design-manual-2012
The document provides an overview of TrusSteel, a division of ITW Building Components Group that manufactures cold-formed steel trusses, outlining the benefits of TrusSteel trusses such as strength, design flexibility, fire resistance, cost effectiveness, and nationwide availability through their network of authorized fabricators. TrusSteel trusses are engineered using proprietary steelVIEW software and feature unique chord sections, webs, fasteners, and structural connections to create a system that offers superior structural performance, quality, safety during handling and installation, and reduces costs for specifiers, designers, contractors and installers. The document
Roof trusses
This document discusses roof trusses, including their components, designs, fabrication, installation, and safety. It covers truss types, principles of design, how they are assembled using metal connectors, how they provide structure and span for roofs, and how to properly install and brace trusses. Safety measures are emphasized, such as using fall protection when working on trusses.
Design of column according ACI codes
1) The document discusses design considerations for columns according to ACI code, including requirements for different types of columns like tied, spirally reinforced, and composite columns.
2) It provides details on failure modes of tied and spiral columns and code requirements for minimum reinforcement ratios, number of bars, clear spacing, cover, and cross sectional dimensions.
3) Lateral reinforcement requirements are discussed, noting ties help restrain longitudinal bars from buckling while spirals provide additional confinement at ultimate load.
Selecting Columns And Beams
Selecting the correct column in order to support a given load without over engineering the situation takes in many factors. This section takes a step by step approach to one method of selection. The key terminology and calculations are explored by use of a simple example. Extracts of column tables are used to extract key variables. The tables used are extracted from standard construction engineering data sheets.
Steel Roof Truss
This document summarizes steel roof trusses. Most building roofs can be framed with prefabricated light-gauge steel trusses, which offer a high-strength, lightweight roof system that can be installed quickly. Steel trusses are manufactured from C-shaped galvanized steel and are stronger than wood trusses. They are constructed by connecting chord and web members made of steel into triangular shapes, then bolting or welding them together on the ground before installing the completed truss on the roof. All steel roofing has a protective metallic coating to prevent rusting.
Reinforcement steel
Reinforcement steel, also known as rebar or reinforcing steel, is a common steel bar that is used to strengthen concrete. It is made of carbon steel and has ridges to better anchor into concrete. Rebar is susceptible to rusting but the high pH of concrete protects it from corrosion. The steel is heated until red hot and then quenched with water, which tempers the outer layer while leaving the core softer. This creates a reinforced structure with both hardened and softer layers of steel. There are various types of structural steel shapes available, including angles, channels, corrugated sheets, expanded metal, T-sections, and I-beams, which vary in size and specifications depending on their application.
Footing design 10.01.03.054
This presentation discusses footing design and provides information on different types of footings, including spread footings, continuous footings, combined footings, and strap or cantilever footings. It describes the footing design procedure, which involves determining loads, collecting soil data, selecting footing dimensions, reinforcement, and checking for stability. Recommendations are provided for minimum investigation depths when assessing soil conditions for footing design. Load types, eccentric loading, and effective foundation area are also covered.
steel roof truss
The document discusses different types of roof trusses including king post truss, queen post truss, Howe truss, Pratt truss, fan truss, and north light roof truss. It describes the advantages of roof trusses such as being cost effective, allowing for quick installation, and providing stability. Tubular steel trusses are discussed as being used for large span constructions over 25-30 meters. The advantages of tubular steel trusses include reduced maintenance costs and corrosion resistance compared to other materials.
Placing column layout
This document provides three thumb rules for column placement in building design:
1. The minimum column size should be 9"x9" for a single-story structure and 12"x9" for a 1.5-story structure, using appropriate concrete grades. Larger column sizes are needed for greater distances between columns or additional floors.
2. The distance between column centers should not exceed 4m for 9"x9" columns, and larger column sizes are needed to allow for greater distances.
3. Columns should be arranged in a rectangular grid or circular pattern, not zigzag, to avoid structural issues in load transfer, wall construction, and beam placement. Following these thumb rules can help prevent mistakes in structural
Steel roof trusses
This document provides information on metal roofing, including the different types of materials used, advantages and disadvantages, and specifications for metal roof trusses. It discusses various metal options for roofing like corrugated steel, copper, aluminum, and stone-coated steel. It also outlines inputs required when specifying metal roof trusses to manufacturers, such as truss type, location, and open category.
Reinfocing details of column
This document provides details about reinforcing concrete columns and footings. It discusses that columns are vertical members that support loads and transmit them downward. Reinforcement is added to reduce column size and resist compression and bending forces. The main reinforcement runs longitudinally and is arranged in square, rectangular, or circular patterns. Minimum and maximum longitudinal steel requirements are specified. Transverse reinforcement is also included to help position longitudinal bars and confine the concrete.
Sp 34-1987 handbook on reinforcement and detailing
This document is a handbook on reinforcement and detailing published by the Bureau of Indian Standards. It provides information on different types of steel used for reinforcement in concrete, including mild steel, medium tensile steel, high strength deformed steel bars, and hard-drawn steel wire fabric. It specifies the requirements for each type of steel in terms of chemical composition, mechanical properties, dimensions and tolerances. The handbook also covers detailing functions, structural drawings, general detailing requirements, bar bending schedules, and detailing of different structural elements like foundations, columns, beams etc.
Columns lecture#1
This document discusses different types and classifications of columns. It defines a column as a vertical structural member primarily designed to carry axial compression loads. Columns can be classified based on their shape, reinforcement, and type of loading. Common shapes include square, rectangular, circular, L-shaped, and T-shaped sections. Reinforcement types include tied columns with tie bars, spiral columns with helical reinforcement, and composite columns with encased steel. Columns are either concentrically loaded with forces through the centroid, or eccentrically loaded off-center. The document also covers column capacity calculations, resistance factors, and provides an example problem.
Footing design(09.02.03.096)
The document discusses various types of footings used in building foundations. It defines a footing as the lower part of a foundation constructed below ground level on solid ground. The main purposes of footings are to transfer structural loads to the soil over a large area to prevent soil and building movement, and to resist settlement and lateral loads. Common footing types include isolated, strap, strip/continuous, and combined footings. Key data needed for footing design includes soil bearing capacity, structural loads, and column dimensions. The document outlines general design procedures and considerations for spread, combined, strap, and brick footings.
Trusses
Trusses are structures composed of straight members connected at joints. They have three key characteristics: they only experience axial loads, loads are applied only at end points, and members are joined by pins. Trusses are used to support roofs and bridges. To analyze a truss, assumptions are made that loads act only at end points, member weight is ignored, and members experience only axial loads as either tension or compression. The method of joints and method of sections can be used to calculate the internal forces in each member and determine if each member is in tension or compression.
PPT OF TRUSSES
The document discusses trusses and steel sections. A truss is a structure comprising triangular units constructed with straight members connected at joints. Trusses distribute external forces through a framework of triangular elements and are used to span large distances. There are different types of trusses including Pratt trusses, Town's lattice trusses, and bowstring trusses. The document also discusses steel sections which are construction materials formed into specific shapes used in engineering structures. Steel is an alloy of iron and carbon.
Footing and Its Types
This document discusses different types of footings used in building construction. It describes strip footings, which are continuous strips of concrete under walls. It also discusses raft/mat footings, which are continuous footings that support an entire structure. Finally, it covers isolated/pad footings, which are independent slabs of concrete that support individual columns or piers. The document provides details on when each type of footing would be used based on soil conditions, structural loads, and other factors. It also lists variations of pad footings and references additional resources on foundations.
footing
Footings are structural members that support columns and walls and transmit their loads to the soil. Different types of footings include wall footings, isolated/single footings, combined footings, cantilever/strap footings, continuous footings, rafted/mat foundations, and pile caps. Footings must be designed to safely carry and transmit loads to the soil while meeting code requirements regarding bearing capacity, settlement, reinforcement, and shear strength. A proper footing design involves determining loads, allowable soil pressure, reinforcement requirements, and assessing settlement.
Reinforcement detailing
The document discusses proper detailing of reinforced concrete structures, which is essential for safety and structural performance. It provides guidelines and examples of good and bad detailing practices for common reinforced concrete elements like slabs, beams, columns, and foundations. Proper detailing is important to avoid construction errors and ensure the structural design works as intended under gravity and seismic loads.
Findlay Evans Waterproofing with AIW - Article April 2017
Findlay Evans Waterproofing with AIW - Article April 2017MELBOURNE Commercial Waterproofers - Findlay-Evans Waterproofing
The AIW Delivers on the Importance of Waterproofing
On March 29, 2017, the AIW attended and presented at the ADEB (Architects Designers Engineers Builders) Waterproofing Breakfast Seminar in Sydney. The focus was on addressing commercial waterproofing and residential high-rise waterproofing failures and solutions.
Presentations and Key Points
Paul Evans, AIW President, gave an overview of the AIW's role in raising waterproofing standards in Australia. Robert McDonald, an AIW member, delivered a session on the “Australian Standards in Waterproofing.” These presentations covered:
Common defects in internal and external waterproofing
Priming and substrate moisture content
Inspection and testing of waterproofing
Drainage and waterproofing techniques
Product knowledge and standards compliance, including:
CA 55 - 1970 (Design and Installation of Bituminous Fabric Roofing)
AS 3740 (Waterproofing Wet Areas in Residential Buildings)
AS 4858 - 2004 (Wet Area Membranes)
AS 4654 - 2012 (Waterproofing Membrane)
The AIW remains dedicated to updating, providing current information, and educational resources for all industries involved with waterproofing.
Achieving Uniform Waterproofing Compliance Nationally
Achieving uniform waterproofing compliance across Australia involves collaboration with State and Territory Regulatory Authorities, which play a crucial role. Current licensing requirements are often disjointed, and in many states, not mandatory.
Local authorities and building surveyors request Waterproofing Application Certificates to certify compliance with BCA and Australian Standards. These certificates must be issued by a competent person, whose work falls under the scope of their license or who has formal qualifications to carry out the work. Training and qualifications are regulated under the National Qualifications Framework.How are Lilac French Bulldogs Beauty Charming the World and Capturing Hearts ...
After being the most listed dog breed in the United States for 31
years in a row, the Labrador Retriever has dropped to second place
in the American Kennel Club's annual survey of the country's most
popular canines. The French Bulldog is the new top dog in the
United States as of 2022. The stylish puppy has ascended the
rankings in rapid time despite having health concerns and limited
color choices.
More Related Content
Viewers also liked
3D Isomatric View Restaurant
The document describes the building materials and structure for a restaurant based on Chinese architecture. It includes iron pillars, plates, and beams; RCC pillars, beams, and footings; stone walls and slabs; a pitched roof with purlins and struts; tiles; and an iron frame work. The project involves constructing a restaurant with a covered area of 1850 square feet on a land area of 1100 square feet in Ajmer, India.
Trussteel design-manual-2012
The document provides an overview of TrusSteel, a division of ITW Building Components Group that manufactures cold-formed steel trusses, outlining the benefits of TrusSteel trusses such as strength, design flexibility, fire resistance, cost effectiveness, and nationwide availability through their network of authorized fabricators. TrusSteel trusses are engineered using proprietary steelVIEW software and feature unique chord sections, webs, fasteners, and structural connections to create a system that offers superior structural performance, quality, safety during handling and installation, and reduces costs for specifiers, designers, contractors and installers. The document
Roof trusses
This document discusses roof trusses, including their components, designs, fabrication, installation, and safety. It covers truss types, principles of design, how they are assembled using metal connectors, how they provide structure and span for roofs, and how to properly install and brace trusses. Safety measures are emphasized, such as using fall protection when working on trusses.
Design of column according ACI codes
1) The document discusses design considerations for columns according to ACI code, including requirements for different types of columns like tied, spirally reinforced, and composite columns.
2) It provides details on failure modes of tied and spiral columns and code requirements for minimum reinforcement ratios, number of bars, clear spacing, cover, and cross sectional dimensions.
3) Lateral reinforcement requirements are discussed, noting ties help restrain longitudinal bars from buckling while spirals provide additional confinement at ultimate load.
Selecting Columns And Beams
Selecting the correct column in order to support a given load without over engineering the situation takes in many factors. This section takes a step by step approach to one method of selection. The key terminology and calculations are explored by use of a simple example. Extracts of column tables are used to extract key variables. The tables used are extracted from standard construction engineering data sheets.
Steel Roof Truss
This document summarizes steel roof trusses. Most building roofs can be framed with prefabricated light-gauge steel trusses, which offer a high-strength, lightweight roof system that can be installed quickly. Steel trusses are manufactured from C-shaped galvanized steel and are stronger than wood trusses. They are constructed by connecting chord and web members made of steel into triangular shapes, then bolting or welding them together on the ground before installing the completed truss on the roof. All steel roofing has a protective metallic coating to prevent rusting.
Reinforcement steel
Reinforcement steel, also known as rebar or reinforcing steel, is a common steel bar that is used to strengthen concrete. It is made of carbon steel and has ridges to better anchor into concrete. Rebar is susceptible to rusting but the high pH of concrete protects it from corrosion. The steel is heated until red hot and then quenched with water, which tempers the outer layer while leaving the core softer. This creates a reinforced structure with both hardened and softer layers of steel. There are various types of structural steel shapes available, including angles, channels, corrugated sheets, expanded metal, T-sections, and I-beams, which vary in size and specifications depending on their application.
Footing design 10.01.03.054
This presentation discusses footing design and provides information on different types of footings, including spread footings, continuous footings, combined footings, and strap or cantilever footings. It describes the footing design procedure, which involves determining loads, collecting soil data, selecting footing dimensions, reinforcement, and checking for stability. Recommendations are provided for minimum investigation depths when assessing soil conditions for footing design. Load types, eccentric loading, and effective foundation area are also covered.
steel roof truss
The document discusses different types of roof trusses including king post truss, queen post truss, Howe truss, Pratt truss, fan truss, and north light roof truss. It describes the advantages of roof trusses such as being cost effective, allowing for quick installation, and providing stability. Tubular steel trusses are discussed as being used for large span constructions over 25-30 meters. The advantages of tubular steel trusses include reduced maintenance costs and corrosion resistance compared to other materials.
Placing column layout
This document provides three thumb rules for column placement in building design:
1. The minimum column size should be 9"x9" for a single-story structure and 12"x9" for a 1.5-story structure, using appropriate concrete grades. Larger column sizes are needed for greater distances between columns or additional floors.
2. The distance between column centers should not exceed 4m for 9"x9" columns, and larger column sizes are needed to allow for greater distances.
3. Columns should be arranged in a rectangular grid or circular pattern, not zigzag, to avoid structural issues in load transfer, wall construction, and beam placement. Following these thumb rules can help prevent mistakes in structural
Steel roof trusses
This document provides information on metal roofing, including the different types of materials used, advantages and disadvantages, and specifications for metal roof trusses. It discusses various metal options for roofing like corrugated steel, copper, aluminum, and stone-coated steel. It also outlines inputs required when specifying metal roof trusses to manufacturers, such as truss type, location, and open category.
Reinfocing details of column
This document provides details about reinforcing concrete columns and footings. It discusses that columns are vertical members that support loads and transmit them downward. Reinforcement is added to reduce column size and resist compression and bending forces. The main reinforcement runs longitudinally and is arranged in square, rectangular, or circular patterns. Minimum and maximum longitudinal steel requirements are specified. Transverse reinforcement is also included to help position longitudinal bars and confine the concrete.
Sp 34-1987 handbook on reinforcement and detailing
This document is a handbook on reinforcement and detailing published by the Bureau of Indian Standards. It provides information on different types of steel used for reinforcement in concrete, including mild steel, medium tensile steel, high strength deformed steel bars, and hard-drawn steel wire fabric. It specifies the requirements for each type of steel in terms of chemical composition, mechanical properties, dimensions and tolerances. The handbook also covers detailing functions, structural drawings, general detailing requirements, bar bending schedules, and detailing of different structural elements like foundations, columns, beams etc.
Columns lecture#1
This document discusses different types and classifications of columns. It defines a column as a vertical structural member primarily designed to carry axial compression loads. Columns can be classified based on their shape, reinforcement, and type of loading. Common shapes include square, rectangular, circular, L-shaped, and T-shaped sections. Reinforcement types include tied columns with tie bars, spiral columns with helical reinforcement, and composite columns with encased steel. Columns are either concentrically loaded with forces through the centroid, or eccentrically loaded off-center. The document also covers column capacity calculations, resistance factors, and provides an example problem.
Footing design(09.02.03.096)
The document discusses various types of footings used in building foundations. It defines a footing as the lower part of a foundation constructed below ground level on solid ground. The main purposes of footings are to transfer structural loads to the soil over a large area to prevent soil and building movement, and to resist settlement and lateral loads. Common footing types include isolated, strap, strip/continuous, and combined footings. Key data needed for footing design includes soil bearing capacity, structural loads, and column dimensions. The document outlines general design procedures and considerations for spread, combined, strap, and brick footings.
Trusses
Trusses are structures composed of straight members connected at joints. They have three key characteristics: they only experience axial loads, loads are applied only at end points, and members are joined by pins. Trusses are used to support roofs and bridges. To analyze a truss, assumptions are made that loads act only at end points, member weight is ignored, and members experience only axial loads as either tension or compression. The method of joints and method of sections can be used to calculate the internal forces in each member and determine if each member is in tension or compression.
PPT OF TRUSSES
The document discusses trusses and steel sections. A truss is a structure comprising triangular units constructed with straight members connected at joints. Trusses distribute external forces through a framework of triangular elements and are used to span large distances. There are different types of trusses including Pratt trusses, Town's lattice trusses, and bowstring trusses. The document also discusses steel sections which are construction materials formed into specific shapes used in engineering structures. Steel is an alloy of iron and carbon.
Footing and Its Types
This document discusses different types of footings used in building construction. It describes strip footings, which are continuous strips of concrete under walls. It also discusses raft/mat footings, which are continuous footings that support an entire structure. Finally, it covers isolated/pad footings, which are independent slabs of concrete that support individual columns or piers. The document provides details on when each type of footing would be used based on soil conditions, structural loads, and other factors. It also lists variations of pad footings and references additional resources on foundations.
footing
Footings are structural members that support columns and walls and transmit their loads to the soil. Different types of footings include wall footings, isolated/single footings, combined footings, cantilever/strap footings, continuous footings, rafted/mat foundations, and pile caps. Footings must be designed to safely carry and transmit loads to the soil while meeting code requirements regarding bearing capacity, settlement, reinforcement, and shear strength. A proper footing design involves determining loads, allowable soil pressure, reinforcement requirements, and assessing settlement.
Reinforcement detailing
The document discusses proper detailing of reinforced concrete structures, which is essential for safety and structural performance. It provides guidelines and examples of good and bad detailing practices for common reinforced concrete elements like slabs, beams, columns, and foundations. Proper detailing is important to avoid construction errors and ensure the structural design works as intended under gravity and seismic loads.
Viewers also liked (20)
Sp 34-1987 handbook on reinforcement and detailing
Sp 34-1987 handbook on reinforcement and detailing
Recently uploaded
Findlay Evans Waterproofing with AIW - Article April 2017
Findlay Evans Waterproofing with AIW - Article April 2017MELBOURNE Commercial Waterproofers - Findlay-Evans Waterproofing
The AIW Delivers on the Importance of Waterproofing
On March 29, 2017, the AIW attended and presented at the ADEB (Architects Designers Engineers Builders) Waterproofing Breakfast Seminar in Sydney. The focus was on addressing commercial waterproofing and residential high-rise waterproofing failures and solutions.
Presentations and Key Points
Paul Evans, AIW President, gave an overview of the AIW's role in raising waterproofing standards in Australia. Robert McDonald, an AIW member, delivered a session on the “Australian Standards in Waterproofing.” These presentations covered:
Common defects in internal and external waterproofing
Priming and substrate moisture content
Inspection and testing of waterproofing
Drainage and waterproofing techniques
Product knowledge and standards compliance, including:
CA 55 - 1970 (Design and Installation of Bituminous Fabric Roofing)
AS 3740 (Waterproofing Wet Areas in Residential Buildings)
AS 4858 - 2004 (Wet Area Membranes)
AS 4654 - 2012 (Waterproofing Membrane)
The AIW remains dedicated to updating, providing current information, and educational resources for all industries involved with waterproofing.
Achieving Uniform Waterproofing Compliance Nationally
Achieving uniform waterproofing compliance across Australia involves collaboration with State and Territory Regulatory Authorities, which play a crucial role. Current licensing requirements are often disjointed, and in many states, not mandatory.
Local authorities and building surveyors request Waterproofing Application Certificates to certify compliance with BCA and Australian Standards. These certificates must be issued by a competent person, whose work falls under the scope of their license or who has formal qualifications to carry out the work. Training and qualifications are regulated under the National Qualifications Framework.How are Lilac French Bulldogs Beauty Charming the World and Capturing Hearts ...
After being the most listed dog breed in the United States for 31
years in a row, the Labrador Retriever has dropped to second place
in the American Kennel Club's annual survey of the country's most
popular canines. The French Bulldog is the new top dog in the
United States as of 2022. The stylish puppy has ascended the
rankings in rapid time despite having health concerns and limited
color choices.
一比一原版(sfu毕业证书)西蒙菲莎大学毕业证如何办理
原版一模一样【微信：741003700 】【(sfu毕业证书)西蒙菲莎大学毕业证成绩单】【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理(sfu毕业证书)西蒙菲莎大学毕业证【微信：741003700 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(sfu毕业证书)西蒙菲莎大学毕业证【微信：741003700 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(sfu毕业证书)西蒙菲莎大学毕业证【微信：741003700 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(sfu毕业证书)西蒙菲莎大学毕业证【微信：741003700 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
sim owner details | +923099554040 | sim owner details pakistan
Whatsapp Number: +923099554040
sim owner details
sim owner details pakistan
nadra sim owner details
sim owner details by number
sim owner details online
sim owner details apk
sim owner details app
sim owner details online check pakistan
pak sim data sim owner details
zong sim owner details
check sim owner details
how to check sim owner details in pakistan
find sim owner details in pakistan
mobile sim owner details
how to check sim owner details
sim card owner details
sim card owner details online
sim owner details with name and address
track sim card owner details online
jio sim owner details
sim owner details software
check sim card owner details
find sim owner details
how to check airtel sim owner details
how to check sim card owner details
how to find a sim owner details
how to find sim owner details
how to know sim card owner details
how to know sim owner details
idea sim card owner details online
sim card owner details app
sim card owner details software
sim owner name details
ufone sim owner details
00923456435194 sim owner detail
ap to know the sim owners details
check sim number owner details
find out details of owner of sim card
finding sim registration owner details
full details of sim card owner pakistan
how to check my sim owner details
how to check owner detail through sim
how to check owner details of a sim
how to check owner details of jaz sim
how to check sim owner details who tease people
how to check sim owner name and detail warid
how to chek owner details of sim
how to find a sim owner details pakista
how to find a sim owner details pakistan
how to find sim card owner details in pakistan
how to get details of others sim owner in pakistan
how to trace a sim owner details pakistan
idea sim card owner details
iran sim details of owner
iran sim details of owner website
mobile phone number details sim owner name address
mobile phone number details sim owner name address location
online sim owner details.pakistan
pakistan prepaid sim owner details
pakistan sim owner details
phone number details sim owner name address location
search sim card owner and details using apk
sim card owner details app for pakistan
sim detail check online owner
sim details online by number owner name
sim number all details with owner name
sim number all details with owner name id card
sim owner call details online
sim owner details by contact number
sim owner details online with name and address
sim owner name full details
The 5 Most Important Pipefitter Tools.pdf
Equip yourself with the essential tools every pipefitter needs to tackle any job with confidence. "The 5 Most Important Pipefitter Tools" explores the must-have instruments that form the backbone of a pipefitter's toolkit. From pipe wrenches and tube cutters to threading machines and alignment clamps, this guide provides an in-depth look at the key tools that ensure precision and efficiency in every project. Learn about the functions, features, and benefits of each tool, along with expert tips on how to use them effectively.Whether you're a seasoned professional or an aspiring pipefitter, understanding these fundamental tools is crucial for success in the field. Discover how investing in the right equipment can enhance your craftsmanship and productivity in pipefitting tasks.
Top Call Girls in Mumbai || +919920725232 || Quick Booking at Affordable Price
Top Call Girls in Mumbai || +919920725232 || Quick Booking at Affordable Price
Verified Call Girls Mumbai || +919920725232 || Quick Booking at Affordable Price
Verified Call Girls Mumbai || +919920725232 || Quick Booking at Affordable Price
BOOST YOUR CREDIBILITY & TRUST WITH VIDEO TESTIMONIALS.pdf
BOOST YOUR CREDIBILITY & TRUST WITH VIDEO TESTIMONIALS.
Let authentic stories from satisfied clients elevate your brand and connect with your audience. Discover the power of genuine testimonials today.
We are Visual Entity, a video production house, a one-stop shop for all your video requirements. We venture into making unmatched content with our Corporate video, Animated Explainer video, Startup video, Kickstarter video, Product video, TV commercials, and Youtube campaign. We believe in story-driven films that help you make an authentic and meaningful connection with your audience.
The Impact of Team Sports on Social Skills Development.pdf
Explore how team sports contribute to social skills development and why they are an essential part of growing up.
High Tech Central Air Services. | HVAC Services New York
High Tech Central Air Services , specialize in all forms of commercial HVAC projects. We install, repair, and maintain commercial HVAC systems of any type. provides heating and air conditioning services within New York City, Manhattan, Queens, Brooklyn, Bronx, Staten Island, Long Island, New Jersey, Connecticut. Our PTAC services are second to none. If you are interested in any of our PTAC services, please give us a call to schedule an appointment. The number to call is (917) 310-0014. https://www.hightechcentralair.com #hvac #plumbing #airconditioning #cooling #hvaclife #plumber #heatingandcooling #hvacservice #furnace #ac #hvactechnician #boiler #hvactech #plumbinglife #heatingengineer #airconditioner #construction #maintenance #plumbers #hvacinstall #hvacrepair #home #service #boilers #refrigeration #heatingsystem #hvacr #gas #contractor #newyork
Foresic Academy. Information Security Company in Punjab (INDIA)
Forensic Academy follows a broad vision of defending information from unauthorized access, use , disclosure,
disruption, modification, perusal, inspection, recording or destruction. The aim at Forensic Academy is to
provide information security solutions to clients with wide line-up of platforms: network, web application,
Android or IOS Application, Servers, Cloud and databases. Forensic Academy provides practical and interactive
training on Ethical hacking covering various subjects in information security and has structured customized
certification courses covering needs of newbies', students and corporate world- Forensic Academy aims to
cater to the need of all.
FORENSIC ACADEMY has a larger aim of expanding the IT Security which is not more that 10 years old in
INDIA. India has not more than 1000 cyber security experts which are quite less compared to the requirement
of more than 4 lakh experts. Increase in worldwide awareness in cyber security demands a growth in India
too.
The Late Samuel Sekyere Safo-Ankoma Funeral Booklet
The Late Samuel Sekyere Safo-Ankoma Funeral Program.
ICS (Industrial Control System) Cybersecurity Training
ICS Cybersecurity training is intended for security professionals and control system designs in order to give them propelled cybersecurity aptitudes and learning in order to ensure the Industrial Control System (ICS) and keep their mechanical task condition secure against digital dangers.
Audience:
Control engineers, integrators and architects
System administrators, engineers
Information Technology (IT) professionals
Security Consultants
Managers who are responsible for ICS
Researchers and analysts working on ICS security
Vendors, Executives and managers
Information technology professionals, security engineers, security analysts, policy analysts
Investors and contractors
Technicians, operators, and maintenance personnel
Findlay Evans Waterproofing with AIW - Article July 2019
Findlay Evans Waterproofing with AIW - Article July 2019MELBOURNE Commercial Waterproofers - Findlay-Evans Waterproofing
Comprehensive Guide to Balcony Waterproofing Repairs
Addressing Leaking Balconies, Roofs, and Rooftop Terraces
Leaking balconies, roofs, and rooftop terraces can cause catastrophic damage to structures below. Water leaks may cause not only aesthetic and superficial damage but can also compromise the structural integrity of the building envelope. If a failed waterproofing membrane is the cause, re-grouting or surface sealing is merely a temporary fix. Such band-aid methods will eventually fail, causing cracks in tiles, grout, and membranes as the balcony moves.
In many cases, failed membranes require a complete strip-off, structural repairs if needed, reinstallation of waterproofing, and a new finish surface. Key considerations in this process include the strength of the subfloor and screed, presence of substrate dips and hollows, correct balcony slope and fall, window and door frame installation, door threshold sealing, adequate drainage, and the potential for underlying pipe leaks. Existing tiling and expansion joints should also be assessed to determine their role in the balcony failure.
Waterproofing Preparation
Proper preparation is critical for any waterproofing membrane installation. The substrate must be clean, free of dirt and other contaminants. This involves vacuum cleaning and/or diamond grinding to ensure a smooth, dry, and debris-free surface. In some cases, washing the substrate may be necessary.
Waterproofing Detailing
Before installing a waterproofing system, construction features that interrupt the membrane layer must be adequately protected and sealed. This includes:
Perimeter Upturns: Attachment points for railings and balustrades, joints between horizontal and vertical surfaces, and structural and expansion joints. Sealant should be applied 15mm wide to all junctions, reinforced with polyester or fiberglass mat to a DFT of 1.2mm, 100mm above finished floor height, or 25mm above the water line. The membrane system should be installed 200mm onto balcony floor areas.
Door/Window Step Downs: Similar to perimeter upturns, apply sealant 15mm wide to all junctions, reinforced with fiberglass mat to a DFT of 1.2mm, ensuring the membrane system is installed 200mm onto balcony areas.
Drains & Floor Waste Details: All floor wastes should have a recessed leak control flange installed, primed with appropriate primer, and the membrane system installed as per specifications.
Waterproofing Installation: Australian Standards
The installation of a Class 2/3 waterproof membrane system to external concrete must comply with AS 4654.2. Key considerations for installation include:
Installation Conditions: Avoid installation in extreme temperatures (below 10°C or above 35°C) to prevent accelerated or decelerated cure times.
Type of Membrane: Use a flexible waterproofing membrane capable of withstanding normal cyclic fluctuations and ponding water.BU毕业证书挂科购买
波士顿大学毕业证成绩单(留信网认证)【176555708微信】官方原版办理毕业证书丢了
【BU毕业证】176555708微信仿制波士顿大学学位证成绩单BU文凭证书 买本科/硕士学历BU学士学位证BU留信网学历学位认证办BU使馆公证认证
（波士顿大学毕业证成绩单硕士学历）【微信176555708】代办BU学历认证留信网伪造波士顿大学学位证书精仿波士顿大学本科/硕士文凭证书补办波士顿大学 diplomaoffer,Transcript购买【微信176555708】波士顿大学毕业证成绩单购买BU假毕业证学位证书购买伪造波士顿大学文凭证书学位证书,专业办理雅思、托福成绩单，学生ID卡，在读证明，海外各大学offer录取通知书，毕业证书，成绩单，文凭等材料:1:1完美还原毕业证、offer录取通知书、学生卡等各种在读或毕业材料的防伪工艺（包括 烫金、烫银、钢印、底纹、凹凸版、水印、防伪光标、热敏防伪、文字图案浮雕，激光镭射，紫外荧光，温感光标）学校原版上有的工艺我们一样不会少，不论是老版本还是最新版本，都能保证最高程度还原，力争完美以求让所有同学都能享受到完美的品质服务。
How our Rebranding Succeeds in Instilling trust in Every Agri Citizen
Ninjacart recently rebranded to emphasize its mission of improving the lives of agri citizens, including farmers, traders, and retailers. The rebranding introduced affiliated brands NinjaMandi, NinjaGlobal, NinjaKirana, and NinjaKisan, expanding Ninjacart's offerings to credit and commerce. A new brand film honors the contributions of agri citizens, fostering pride and trust among customers. The updated logo symbolizes Ninjacart's commitment to unity and growth in the agri value chain. This transformation highlights Ninjacart’s evolution from a fulfilment-centric business to a comprehensive marketplace platform, aiming to build #BetterLives for all agri citizens.
QuickBooks Unrecoverable Error...........
In the realm of accounting software, QuickBooks stands as a cornerstone for businesses of various sizes. Its robust features streamline financial operations, offering efficiency and accuracy in managing accounts, payroll, invoices, and more. However, like any complex software system, QuickBooks is not immune to errors. Among the most vexing issues users encounter is the "QuickBooks Unrecoverable Error." This error can halt productivity, disrupt workflow, and leave users scrambling for solutions.
一比一原版（UIUC毕业证）UIUC毕业证香槟分校毕业证如何办理
原件一模一样【微信：176555708】【UIUC毕业证香槟分校毕业证（UIUC学位证）成绩单】【微信：176555708】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份【微信：176555708】
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
办理UIUC毕业证香槟分校毕业证（UIUC学位证）学位证【微信：176555708 】外观非常精致，由特殊纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理UIUC毕业证香槟分校毕业证（UIUC学位证）学位证【微信：176555708 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理UIUC毕业证香槟分校毕业证（UIUC学位证）学位证【微信：176555708 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理UIUC毕业证香槟分校毕业证（UIUC学位证）学位证【微信：176555708 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
Findlay Evans Waterproofing with AIW - Article November 2017
Findlay Evans Waterproofing with AIW - Article November 2017MELBOURNE Commercial Waterproofers - Findlay-Evans Waterproofing
Advancing Waterproofing Expertise with AIW
Waterproofing Melbourne and beyond, the Australian Institute of Waterproofing (AIW) is proud to introduce an innovative commercial waterproofing course. Developed in collaboration with the Master Builders Association Vic, this course, led by Andrew Golle, is tailored for project managers overseeing balcony waterproofing, roof waterproofing, and concrete repair. Paul Evans emphasizes the critical nature of these roles in preventing costly post-construction issues. Private sessions for building supervisors are now available, addressing common mistakes due to poor applications and cost-cutting measures.
The course covers essential topics, including product selection, surface preparation, and the importance of basement waterproofing. Paul Evans highlights the recurring problems seen in the industry, where inadequate training and oversight lead to significant issues, from retaining wall waterproofing to lift pit waterproofing.
In response to these challenges, the AIW is developing a "Below Ground Waterproofing Standard" specific to Australia, inspired by UK standards. Paul Evans calls for industry-wide collaboration to ensure the standard encompasses diverse methods and materials, ultimately enhancing the quality and longevity of waterproofing work.
By equipping supervisors and builders with the right knowledge, AIW aims to improve the overall standard of waterproofing practices, reducing the risk of failures and the subsequent mental and financial stress on homeowners. This proactive approach is crucial for the sustainability and reliability of waterproofing in construction projects across Australia.Recently uploaded (20)
Findlay Evans Waterproofing with AIW - Article April 2017
Findlay Evans Waterproofing with AIW - Article April 2017
How are Lilac French Bulldogs Beauty Charming the World and Capturing Hearts ...
How are Lilac French Bulldogs Beauty Charming the World and Capturing Hearts ...
sim owner details | +923099554040 | sim owner details pakistan
sim owner details | +923099554040 | sim owner details pakistan
Top Call Girls in Mumbai || +919920725232 || Quick Booking at Affordable Price
Top Call Girls in Mumbai || +919920725232 || Quick Booking at Affordable Price
Verified Call Girls Mumbai || +919920725232 || Quick Booking at Affordable Price
Verified Call Girls Mumbai || +919920725232 || Quick Booking at Affordable Price
BOOST YOUR CREDIBILITY & TRUST WITH VIDEO TESTIMONIALS.pdf
BOOST YOUR CREDIBILITY & TRUST WITH VIDEO TESTIMONIALS.pdf
The Impact of Team Sports on Social Skills Development.pdf
The Impact of Team Sports on Social Skills Development.pdf
High Tech Central Air Services. | HVAC Services New York
High Tech Central Air Services. | HVAC Services New York
Foresic Academy. Information Security Company in Punjab (INDIA)
Foresic Academy. Information Security Company in Punjab (INDIA)
The Late Samuel Sekyere Safo-Ankoma Funeral Booklet
The Late Samuel Sekyere Safo-Ankoma Funeral Booklet
ICS (Industrial Control System) Cybersecurity Training
ICS (Industrial Control System) Cybersecurity Training
Findlay Evans Waterproofing with AIW - Article July 2019
Findlay Evans Waterproofing with AIW - Article July 2019
How our Rebranding Succeeds in Instilling trust in Every Agri Citizen
How our Rebranding Succeeds in Instilling trust in Every Agri Citizen
Findlay Evans Waterproofing with AIW - Article November 2017
Findlay Evans Waterproofing with AIW - Article November 2017
Best rebar location and mapping?
- 1. Sandberg GPR Tel: 0207 565 7000 Email: gpr@sandberg.co.uk using Ground Penetrating Radar THE BEST REBAR LOCATION AND MAPPING EVER? sandberg
- 2. Sandberg GPR Tel: 0207 565 7000 Email: gpr@sandberg.co.uk 3 STEPS... sandberg 1: Scan 2: Analyse 3: Report
- 3. Sandberg GPR Tel: 0207 565 7000 Email: gpr@sandberg.co.uk • Clean, quick and non-intrusive • All data is saved electronically • High resolution data to 350mm depth • Greater depths at lower resolution possible • Results can be marked up on-site if required sandberg Scanning
- 4. Sandberg GPR Tel: 0207 565 7000 Email: gpr@sandberg.co.uk sandberg Analysis • Undertaken off-site • Latest GSSI Radan software used
- 5. Sandberg GPR Tel: 0207 565 7000 Email: gpr@sandberg.co.uk sandberg Analysis - advanced 3D visualisation Rebar co-ordinates
- 6. Sandberg GPR Tel: 0207 565 7000 Email: gpr@sandberg.co.uk sandberg Reporting Depth slice images
- 7. Sandberg GPR Tel: 0207 565 7000 Email: gpr@sandberg.co.uk sandberg Reporting Cross-section radargrams
- 8. Sandberg GPR Tel: 0207 565 7000 Email: gpr@sandberg.co.uk sandberg Reporting CAD plots
- 9. Sandberg GPR Tel: 0207 565 7000 Email: gpr@sandberg.co.uk Website Concrete Imaging and Rebar Mapping Locating Deep Rebar Contact Tel: 0207 565 7054 Email: gpr@sandberg.co.uk sandberg More information