Beige Travertine Marble is a unbreakable material whose slabs have a resin and web assistance which requires an epoxy setting adhesive like Latapoxy.

1. Beige Travertine
Marble Is A
Breakable Material
Whose Slabs Have
A Resin And Web
Assistance

2. Beige Travertine Marble is a
unbreakable material
whose slabs have a resin
and web assistance which
requires an epoxy setting
adhesive like Latapoxy.
Beige Travertine Marble is a permeable material with naturally
happening holes that may remain unoccupied or factory filled with
resin or cement.It gives an exceptional countenance to your surface as
every piece of travertine has its own natural texture and configuration.
Using this marble to your new building venture adds a delicategrace to
the project.

3. Stone Hub India
Beige Travertine Marble Mending and working
with such materials, an experienced fabricator
will be of much help.

4. 1.
COMMERCIAL
FLOORING
Let’s start with
the first set of
slides

5. “Commercial flooring comprise
shopping malls, retail, hospitality,
hospitals, institutional
environments, retail, hospitality,
office spaces and reception areas
Things to think through.

6. ABRASION RESISTANCE
▸ Materials with a High Abrasion Resistance
rating are less likely to scratch than marble,
limestone, onyx, slate, etc
▸ Materials with a Low Abrasion Resistance
rating will scratch with exposure to sand
and other abrasives.
The finish will patina or dull over time as a
result of this scratching.

7. Materials with a
Minimally Absorbent
rating (i.e. Porcelain
Tile, some
Engineered Stone)
are virtually non-
porous. No sealer is
required, they are
less likely to stain,
and they are typically
easier to maintain.
ABSORPTION
Materials with a
Moderately
Absorbent Rating are
resistant to staining
due to low porosity,
but not impervious.
Materials with Highly
Absorbent rating are
prone to staining.

8. ACID SENSITIVITY
Acidic cleaners and
other acid
pollutants will etch
materials that
contain calcium or
magnesium
carbonate (i.e.
marble, limestone
and travertine).
Materials rated as
Moderately
Sensitive or Highly
Sensitive will patina
more rapidly than
materials rated as
Minimally Sensitive.

9. TRAFFIC
Natural stones rated for
Heavy Commercial
Traffic will patina, but
have a history of wearing
well over time. These
materials typically
require less care and
maintenance than
materials rated for
Moderate, Light or
Residential Traffic.

10. BIG
CONCEPT
Wet areas refers to tub enclosures,
showers, bathroom floors and interior
swimming pools. Things to think through

11. ABSORPTION

12. “Materials with a Minimally Absorbent
rating (i.e. some Engineered Stone) are
virtually non-porous. No sealer is
required, they are less likely to stain, and
they are typically easier to maintain.
Materials with a moderately absorbent
rating are resistant to staining due to
low porosity, but not impervious.
Materials with highly absorbent rating
are prone to staining. Always seal
natural stone prior to use.

13. ACID SENSITIVITY
▸ Acidic cleaners and other acid pollutants
will etch materials that contain calcium or
magnesium carbonate (i.e. marble,
limestone and travertine).
▸ Materials rated as Moderately Sensitive or
Highly Sensitive will patina more rapidly
than materials rated as Minimally Sensitive.

14. CARE
AND
MANTAIN
ENCE

15. Place your screenshot here
OIL-BASED
(grease, tar, cooking oil, milk,
cosmetics) an oil-based stain
will darken the stone. Generally
oil must be chemically
dissolved so the source of the
stain can be flushed or rinsed
away. Clean gently with a soft,
liquid cleanser with bleach OR
household detergent OR
ammonia OR mineral spirits
OR acetone.

16. Place your screenshot
here
ORGANIC
(coffee, tea, fruit, tobacco,
paper, food, urine, leaves, bark,
bird droppings) May cause a
pinkish-brown stain and may
disappear after the source of
the stain has been removed.
Outdoors, with the sources
removed, normal sun and rain
action will generally bleach out
the stains. Indoors, clean with
12% hydrogen peroxide (hair
bleaching strength) and a few
drops of ammonia.

17. Place your screenshot here
METAL
(iron, rust, copper, bronze) Iron or rust
stains are orange to brown in color
and follow the shape of the staining
object such as nails, bolts, screws,
cans, flower pots, metal furniture.
Copper and bronze stains appear as
green or muddy-brown and result
from the action of moisture on nearby
or embedded bronze, copper or brass
items. Metal stains must be removed
with a poultice.

18. Place your screenshot here
BIOLOGICAL
(algae, mildew, lichens,
moss, fungi) Clean with
diluted (1/2 cup in a gallon
of water) ammonia OR
bleach OR hydrogen
peroxide.

19. THANKS!
Any questions?
You can find me at www.stonehubindia &
info@stonehubindia.com