Ted Virakhov is seeking an R&D technician position and has over 12 years of experience in R&D labs, manufacturing, quality control, and quality assurance. He has significant experience determining physical and chemical characteristics through tests and experiments. He is proficient in test setup and execution, data analysis, and reporting. Virakhov has worked in various industries including medical devices, chemicals, and consumer goods where he ensured compliance with quality standards.
Experienced Laboratory Analyst with GC Training and Experience who brings formal education along with on hands experience to the workplace. A trained professional who can function in the field as well as in a corporate setting. A motivated problem solver who utilizes all available resources to complete a given task. I can work independently or on a team. Outstanding communication skills that enable me to present a proposal in a boardroom or teach a safety class in the laboratory. Safety 1st!
Experienced Laboratory Analyst with GC Training and Experience who brings formal education along with on hands experience to the workplace. A trained professional who can function in the field as well as in a corporate setting. A motivated problem solver who utilizes all available resources to complete a given task. I can work independently or on a team. Outstanding communication skills that enable me to present a proposal in a boardroom or teach a safety class in the laboratory. Safety 1st!
Experienced Laboratory Analyst with GC Training and Experience who brings formal education along with on hands experience to the workplace. A trained professional who can function in the field as well as in a corporate setting. A motivated problem solver who utilizes all available resources to complete a given task. I can work independently or on a team. Outstanding communication skills that enable me to present a proposal in a boardroom or teach a safety class in the laboratory. Safety 1st!
Experienced Laboratory Analyst with GC Training and Experience who brings formal education along with on hands experience to the workplace. A trained professional who can function in the field as well as in a corporate setting. A motivated problem solver who utilizes all available resources to complete a given task. I can work independently or on a team. Outstanding communication skills that enable me to present a proposal in a boardroom or teach a safety class in the laboratory. Safety 1st!
Anh Nguyen | Laboratory Technician Resume in San Diego CA | Biotech/Pharmaceu...starshaper
Search for a career in the field of biotech, pharmaceutical or related field. Have more than 3 years experience in the industry, strong background in science especially biology and chemistry.
My updated resume for (UMTS, WCDMA, LTE-Advanced 4G and 5G, SDN and NVF) wireless engineering.
Please feel free to contact me if you have any questions.
SUMMARY OF SKILLSAn experienced professional with a divers.docxpicklesvalery
SUMMARY OF SKILLS
An experienced professional with a diversified skill set, demonstrated knowledge, and proven leadership skills. Perform as a cooperative team player focused on exceeding objectives, achieving immediate/long term goals, and meeting operational deadlines. An industrious mission-support/ project management professional with the ability to provide operational support in government and/or corporate environments. Perform well under challenging and rigorous conditions. Possess the highest level of integrity, professionalism, perseverance, and personal accountability. Proficiency in 3 written/spoken languages (English, French and Haitian Creole) and possess superior verbal/written, interpersonal & communications skills, presentation skills & analytical skills.
· Over 6 years’ experience assembling, troubleshooting, repairing and effectively maintain hardware configurations and electronics aviation support equipment. Performed electronics, electrical, mechanical, sheet metal and hydraulic work on board USS Iwo Jima (lhd-7) and USS George Washington (CVN-73).
· Experience with software programs including MS Office (Word, Excel, Power Point, Project, Access, and Outlook), PeopleSoft, Oracle, QuickBooks, and Windows. Familiar with Agile, SAP, Math lab, Minitab, Multisim Electronics software, and Packet Tracer networking software.
· Technical skills include analog and digital electronics, schematics (reading and drawing), oscilloscopes, LC filters, function generators, rectifiers, network analyzers, transistors, JFET, capacitors, microscope-level testing, MOSFETS, diodes, YIG technology and hardware configuration. Ability to read and interpret (Geometric Dimensioning and Tolerance (GD&T) and Electrical drawings), troubleshoot automated control panels. Knowledge of PLC programming and AutoCAD. Also familiar with UL 508 and 698 control panels. Quick to master new skills.
· Knowledge of the standards, methods and processes used for the development, production, management, and revision of drawings and other design documents, including ability to use CAD Micro station equipment and software tools.
· Knowledge of FDA (21 CFR Part 820) and ISO 9000, 9001 & ISO 13485:2003. Process Review, Product Examination and Quality Management System Audit. Knowledge of Continuous improvements process and implementation of lean manufacturing initiatives: lean, six sigma, gage R&R concepts, Kaizan, 5s and statistical analysis.
EDUCATION / TRAINING COURSES
November 2009-2011 ECPI College of Technology Newport News, VA
Bachelor Degree in Electronics Engineer
Major: Electronics Engineer GPA: 3.50
December 2007 ECPI College of Technology Virginia Beach, VA
Associates Degree in Computer and Information Science
Major: Biomedical Equipment RepairGPA: 3.32
INTERNSHIP EXPERIENCE
Portsmouth Naval Hospital Portsmouth, VA
October 2007-November 2007
Completed 135 internship hours
· Performed preventativ ...
Undergone on-job training in various streams of Test (Labview & Test stand Application development,NPI, Test Engineering, Manufacture Engineering and Diagnostic Engineering) for a period of a year in last 13 years.
Very Strong Programming knowledge in LabVIEW – NI-DAQ - Teststand
Hand on experience in executing project with NI DAQ system (PCI,PXI NI-DAQ,
RS-232 and GPIB instruments
Involved in Equipment & Instrument selection and procurement activities
Commissioning Experience of Testing Lab
Having good working knowledge with different sensors and Instrumentation
Hand on experience in designing signal conditioning and driver hardware circuits
Good team player, keen learner, problem solving ability and effective communicator
Experience with electronic circuitry (Analog/Digital)
Fluent in schematics diagram/circuitry and components specs.
Deploy myself to Plan, establish, and maintain Test & Debug setup in India Factory and get certified by the customer.
Installing Production Support Software’s and Application tool.
Follow quality policies like “Gauge Repeatability & Reproducibility (GRR), Calibration, Correlation principles” for qualifying the test setup.
Maintain DPHU (Defects per Hundred units) rate under control, yield rate, production down time by stabilizing the test setup and troubleshooting the problems that arise during the production.
Report bugs to developers and maintains documentation of test results and ensure closure.
Knowledge to handle and utilize compensate techniques in ICT (Agilent i3070).
1. Ted Virakhov Special Note: U.S. Citizen, Fluent in English
685 Village Field Court, Suwanee GA 30024 Phone: 470-266-7819 E-mail: virakhovt@hotmail.com
OBJECTIVE: an R&D technician position. Highly accountable and realistic candidate with total 12 years of extensive experience
in R&D Lab, Manufacturing Tests/QC/QA. Practical knowledge in Medical Devices, Chemical, Mechanical Test/QC and
experiments. Capable to determine physical/dynamic characteristics i.e. Tensile, Flex, Torsion, Impact, Fatigue with precision
measurements. Reports with statistical data, charts and analysis. Strong mechanical aptitude. Noticing highest attention to details.
Knowledgeable in Drawings, Data/Document Management, GDP. Follow FDA, ISO-13485, CAPA, GMP, 5S requirements. Proven
record of achievements. Performance in a Hi-Tech strongly regulated Industries where Quality, Innovation and Safety are priorities!
AREA of EXPERTIZE (summary):
• Significant experience in R&D Lab to determine chemical/physical/dynamic characteristics, QC and Tests.
• Manage work requests from scientists and schedule for maximal efficiency and priority of scientific Tests.
• Proficient in Lab-testing protocols and experiments through setup and execution on both current and prototype products.
• Specialize in Dynamic, Mechanical Testing, Static and Test set-up according to ISO, ASTM, ASME.
• Proficient in material physical properties evaluation of compounds.
• Earned a reputation for preparing accurate Lab Reports, Sample logs and maintaining Data.
• Interpret Test Reports utilizing SPC, comprehensive Data Analysis through Excel spreadsheets and Charts.
• Compile and evaluate statistical data to determine % of Standard Deviation, Means, Averages, and other SPC data.
• Proficient in creation and verification of Manuals, Test Procedures (SOP), ECN (Engineering Change Notification).
• Oversee implementation of 5S organization system in Lab.
• Coordinates activities of Laboratory Tests and QC.
SKILLS: Highly organized in Critical Data keeping; deeply analyzing root of problem and solution; Ability to prioritize task;
Test set-up; GLP; GDP; Outstanding Project/Time Management skills; Reporting research results with analysis; Multi-task;
Aggressive ambitious to reach a goal, possesses a great deal of Energy towards a work, Scrupulous and Conscientious;
Resourceful, Rational and Perceptive. Computer skills: MS Office 2010, MS Windows 8/XP
EXPERIENCE:
3/2015-present R&D Lab Test Technologist Halyard (Kimberly-Clark) Milton, GA
Tensile Tests to determine maximum elongation, fatigue, force or strength and how the material will react to forces.
Times-to-failure data obtained (Life Tests) in order to quantify the life characteristics of a product.
Simulation, Leak, Flow other Tests to determine medical devices functionality.
4/2014-3/2015 R&D Lab Test Technologist ECO-Lab Alpharetta, GA
Manage variety of Tests to determine Instron tensile characteristics: shear, peel, tear tests, hydrostatic and puncture resistance
Making suggestions to improve Validation and Verification Protocols, SOP and tests setup. Preparing Data Analysis.
Communicate openly with scientists regarding timing and progress of requested work.
QC for the new medical surgical drapes. Checking for seals, adhesives on different engineering created materials.
5/2013 – 9/2013 (contract) Test/Quality Technician Care Fusion Tucker GA
Medical surgical instruments Tests/Quality Control on incoming, in-process and final inspection.
QC on Final Packaging including verification of package, labels and documentations for release.
Engineering and Quality Test (Torsion, Compression) on redesigned instruments with recommendations.
QC/QA of the First Article inspection to check Suppliers quality
2008-2013 R&D Senior Test Technologist Maxxis International Suwanee, GA
Manage variety of Tests to determine physical/dynamic characteristics (Instron Tensile, Flex, Fatigue, Stress Strain-other).
Report to Project Engineer regarding Project activities, progress, issues and concerns.
2. Operate Extruder, ViscoAnalyzer, Flexometer, Friction, Fatigue, Abrasion, Rheometer and other Test equipment.
Tests solutions used in processes for chemical concentration, specific gravity, or other characteristics.
Test set up and equipment preventative maintenance on a daily basis.
Liaison between Management and Technicians to coordinate Tests activities, QC and compliance with Test Procedures.
Assists Engineers in building fixtures and prototypes for testing, in formulating test, evaluation plans and procedures.
Introduce equipment operations and safety procedures to new employees according to MSDS and OSHA regulations.
Followed EPA and OSHA mandates to ensure the proper, safe disposal of hazardous samples and waste.
2003-2008 Test/QA Inspector RTP (General Engineering Consulting Company for MARTA) Atlanta, GA
Tests/QA on Subway Train and Buses Engineering and Production systems.
Maintained Database for Tests, Reports, QA, and Engineering Open Items.
Audit/Revise/Write Technical Manuals, Procedures and Policies to ensure compliance with specifications.
Engineering investigation and problem solving on Test results.
EDUCATION: B.S. in Mechanical Engineering State College of Technology
Enclosure: Cover Letter
Ted Virakhov Special Note: U.S. Citizen, Fluent in English
685 Village Field Court; Suwanee, GA 30024 Phone: 470-266-7819 E-mail: virakhovt@hotmail.com
Dear HR Manager,
I am contacting you to explore employment opportunities for the R&D Technician position. My experience
came from the Hi-Tech Industries where Quality, Safety and Innovation are priorities.
Working in R&D laboratories in different industries I obtained experience testing products to determine
maximum dependability in areas of human life and safety. Conducting numerous of Tensile and other
mechanical/chemical Tests. Verifying innovative engineering ideas in order to creating new products.
I am experienced in creating or revising new Protocols and Test methods, preparing Test Reports with SPC
Data and charts.
My work history allows me to work with different Lab Test equipment, performing Test set-up, Assisting
Engineering in building fixtures and prototypes for testing and many other skills.
I managed System Tests and inspection for the MARTA numerous Hi-Tech Projects with a high level of
Standards in Quality and Safety. Successfully consulted and audited numerous of Tests, QA Programs,
Engineering Projects, Manuals and Reports. I was responsible for updates on Tests and Quality supporting
documentation.
The High-Tech job helps me to develop exceptional organizational skills working with Critical Data, achieve
results with a sense of urgency, multi-task skills, and of course analyze Data and Report research results.
Sincerely,
Ted Virakhov
Enclosure: Resume