The document lists 167 mechanical engineering projects related to automobiles and hydraulic/pneumatic systems from 2012. The projects are listed with a project title, code, and year. They cover a wide range of automotive topics including engines, braking systems, emissions control, and alternative energy vehicles. Many projects also involve hydraulic or pneumatic systems for applications like lifting, cutting, and pressing.
We are Offering the projects in quality and low price with free projects class and demonstration classes. Further Details visit our website TEMASOLUTION.COM
MECHANICAL PROJECTS IN PONDICHERRY, 2020-21 MECHANICAL PROJECTS IN CHE...Nexgen Technology
This document lists 220 potential final year automobile project titles for 2020-2021. It provides contact information for Praveen Kumar, who can be reached by phone or email. The projects cover a wide range of automotive technologies, including electric vehicles, alternative fuels, engine modifications, safety systems, and more.
This document discusses the design of an automatic pneumatic bumper system for vehicles. It would use IR sensors to detect obstacles within 4 feet of the vehicle traveling over 40-50 km/hr. When an obstacle is detected, the control unit would activate the pneumatic bumper system to protect the vehicle and anything in front of it. The system aims to increase safety using intelligent electronic controls and pneumatic components. It consists of IR sensors, a control unit and pneumatic bumper activation components.
Group 7's project focuses on site dumpers. Site dumpers are open vehicles used to carry bulk materials on construction sites. They have the load skip in front of the driver and can tip the skip to dump loads. The group evaluates several common site dumper models from manufacturers like Nu-Star, Terex, Wacker Neuson, and MZ Imer. These dumpers have payloads from 2,200 to 13,000 pounds and are powered by diesel engines. Proper training and safety precautions are needed when operating site dumpers to prevent overturning, which is a major cause of accidents.
We have a complete lab set up and work shop for mechanical project fabrications. With a 15 years experience fabricator. The work shop includes lath machines, Welding Machines, Grinding Machines, Drilling Machines , Measuring Tools and other equipments required for fabrication process.
We have been providing fabrication support for major colleges in Bangalore and across Karnataka. We also provide dealerships across India.
More than 200 concepts are available on conventional and non conventional sources, Solar based projects, Agricultural based projects, Automobile based projects, Automation based projects, Pneumatics, Hydraulics etc.
We give them synopsis guidance, classes on components used in fabrication, Working models with complete report and ppt materials.
Projects available for engineering and diploma students.
IEEE REAL TIME PROJECTS FOR ALL BRANCHES Mechanical titlestema_solution
We are Offering the projects in quality and low price with free projects class and demonstration classes. Further Details visit our website TEMASOLUTION.COM
This document contains contact information for Tema Solutions, including phone numbers, email address, and physical address in Chennai, India. It also lists 140 automobile and mechanical engineering projects completed in 2015, including topics like hybrid vehicles, braking systems, engine designs, and wheelchair modifications. Each project is given a unique code (ME01 - ME140).
We are Offering the projects in quality and low price with free projects class and demonstration classes. Further Details visit our website TEMASOLUTION.COM
MECHANICAL PROJECTS IN PONDICHERRY, 2020-21 MECHANICAL PROJECTS IN CHE...Nexgen Technology
This document lists 220 potential final year automobile project titles for 2020-2021. It provides contact information for Praveen Kumar, who can be reached by phone or email. The projects cover a wide range of automotive technologies, including electric vehicles, alternative fuels, engine modifications, safety systems, and more.
This document discusses the design of an automatic pneumatic bumper system for vehicles. It would use IR sensors to detect obstacles within 4 feet of the vehicle traveling over 40-50 km/hr. When an obstacle is detected, the control unit would activate the pneumatic bumper system to protect the vehicle and anything in front of it. The system aims to increase safety using intelligent electronic controls and pneumatic components. It consists of IR sensors, a control unit and pneumatic bumper activation components.
Group 7's project focuses on site dumpers. Site dumpers are open vehicles used to carry bulk materials on construction sites. They have the load skip in front of the driver and can tip the skip to dump loads. The group evaluates several common site dumper models from manufacturers like Nu-Star, Terex, Wacker Neuson, and MZ Imer. These dumpers have payloads from 2,200 to 13,000 pounds and are powered by diesel engines. Proper training and safety precautions are needed when operating site dumpers to prevent overturning, which is a major cause of accidents.
We have a complete lab set up and work shop for mechanical project fabrications. With a 15 years experience fabricator. The work shop includes lath machines, Welding Machines, Grinding Machines, Drilling Machines , Measuring Tools and other equipments required for fabrication process.
We have been providing fabrication support for major colleges in Bangalore and across Karnataka. We also provide dealerships across India.
More than 200 concepts are available on conventional and non conventional sources, Solar based projects, Agricultural based projects, Automobile based projects, Automation based projects, Pneumatics, Hydraulics etc.
We give them synopsis guidance, classes on components used in fabrication, Working models with complete report and ppt materials.
Projects available for engineering and diploma students.
IEEE REAL TIME PROJECTS FOR ALL BRANCHES Mechanical titlestema_solution
We are Offering the projects in quality and low price with free projects class and demonstration classes. Further Details visit our website TEMASOLUTION.COM
This document contains contact information for Tema Solutions, including phone numbers, email address, and physical address in Chennai, India. It also lists 140 automobile and mechanical engineering projects completed in 2015, including topics like hybrid vehicles, braking systems, engine designs, and wheelchair modifications. Each project is given a unique code (ME01 - ME140).
1. Dumpers and dump trucks are vehicles used to transport bulk materials. Dumpers have the load skip in front of the driver that tips to dump the load, while dump trucks have the cab in front of the load.
2. Modern dumpers can carry payloads of up to 10 tons and usually steer by articulating in the middle. They are powered by diesel engines and use hydraulics for tipping, steering, and body lifting. Larger dump trucks ranging from 10-400 tons are used for construction and mining to transport materials over long distances.
3. There are different types of dump trucks including rear dump, bottom dump, articulated, and tipper trucks which are suited to different haul
IGSLabs Technologies offers an internship program managed by industry professionals to enhance employability. They provide project ideas and abstracts for students' final year projects with expertise in various technologies like embedded systems, robotics, Android, and more. Projects are available for engineering, diploma, MCA/BCA and science students across mechanical, automobile, production, automation, renewable energy, pneumatic, hydraulic, and agriculture domains. IGSLabs aims to assist students in their final year projects through their dedicated team of professionals.
This document provides a list of over 100 potential mechanical engineering project ideas for students. It covers projects related to automobiles, mechanical production, automation/mechatronics, and fabrication/non-conventional energy. Some example projects included are an automatic rain-operated wiper for hovercrafts, a quadcopter, regenerative braking systems, automated metro trains, pick and place robots for industrial applications, line following robots with forklifts, and wind or solar power generation devices. The projects are intended for third or fourth year students and cover a wide range of mechanical and engineering topics.
Are you looking best Final year ece projects in Bangalore.Embedded Innovation Lab is the right place for Learning real time projects. Select Right project and will get high marks.
Mechanical projects List 2014 By TechnogroovyTechnogroovy
like our page for more updates:
https://www.facebook.com/Technogroovyindia
With Best Regard's
Technogroovy Systems India Pvt. Ltd.
www.technogroovy.com
Call- +91-9582888121
Whatsapp- +91-8800718323
The document lists 211 potential topics for projects related to fabrication or design and fabrication of machines, systems, or components across various industries including agriculture, manufacturing, material handling, and more. The topics involve both conventional and non-conventional methods and applications of technologies like pneumatics, hydraulics, electricity, and more. They range from small individual components to entire machines, systems, and processes.
This document provides a list of 241 automation and mechanical engineering projects developed by PIC Automation. The projects cover various applications including automobile systems, industrial automation, pneumatic and hydraulic systems, 3D printing, robotics, and renewable energy. Example projects include an automatic differential locking system for vehicles, a PLC-based multi-machine lubrication system, solar air coolers, and a pick-and-place robot controlled by a PLC or cell phone. PIC Automation is located in Chennai, India and can be contacted for more details on any of the listed projects.
The document lists 65 potential mechanical engineering project topics related to automobiles and transportation. Some highlights include projects involving developing an automatic accident avoiding system, GPS vehicle tracking system, intelligent mobile robot navigation, electric vehicle designs, and fabricating systems like turbo chargers, hydraulic brakes, and vehicle jacks. Overall the document provides a wide range of ideas for projects involving designing and building automated systems, vehicles, and components related to automotive and transportation applications.
Automatic pneumatic brake & bumper for 4 wheelar pptyogesh_17
This document describes the design of an automatic pneumatic bumper activation system for vehicles. The system uses IR sensors to detect obstacles within 4 feet of the vehicle. When an obstacle is detected, the control unit activates the pneumatic bumper system to protect the vehicle and its occupants. Key parts of the system include IR transmitter and receiver circuits, a control unit, pneumatic cylinder, bumper, and frame. The pneumatic system is used to safely stop the vehicle using compressed air or gas when an obstacle is too close.
This document lists over 100 mechanical, automobile, and robotics projects proposed by Newage Technologies & Solutions. It provides contact information for Newage, including their address in Kallakurichi and email/phone. The projects are listed over 8 pages and include ideas like a pedal-powered water purifier, automated drilling machines, hybrid vehicles, medical wheelchairs, and various industrial robots.
This document describes a pneumatic three axis modern trailer system. It contains sections on pneumatic cylinders, elements of the system like the air compressor, cylinder, control valve, and vehicle frame. It explains how the system works using compressed air and a control valve to activate pneumatic cylinders that provide lifting. The system offers advantages like lower lifting costs and less power consumption compared to traditional methods. It has applications in lifting vehicles and cranes. The goal is to provide easier unloading of trailers, especially in difficult areas, to reduce time and fuel usage.
The document describes an automatic hydraulic jack project. It provides background on hydraulics, including Pascal's law and the relationship between pressure, force and area. It then discusses the basic components of a hydraulic system, including a pump, motor, valves, conduits and controller. The project uses syringes to act as actuators and directional control valves. Water is used as the transmission medium, with the syringes working together to lift a load automatically via gears, a motor and controller. Advantages include easy operation and control while disadvantages include potential rupturing losing needed pressure.
Babic components of hydraulic & pneumatic systemswakurets_21
The document discusses the basic components and applications of hydraulic and pneumatic systems. It describes the main types of hydraulic and pneumatic actuators including linear actuators like cylinders, and rotary actuators like motors. It also explains the different types of valves used in hydraulic and pneumatic circuits including directional control valves, flow control valves, and pressure control valves. The purpose and basic operation of common valve types are provided like poppet valves, spool valves, needle valves, check valves, and relief valves.
The document provides a list of 177 mechanical engineering project titles from 2012 related to various topics like automobile, robotics, mechatronics, and their corresponding codes. It also includes contact information for Temasolutions, the organization providing the list. The projects range from fabrication of equipment like solar air coolers to intelligent systems like autonomous navigation robots and automatic vehicle control systems.
2013 NEW PROJECT TITLES LIST FOR MECHANICAL TITLEStema_solution
We are Offering the projects in quality and low price with free projects class and demonstration classes. Further Details visit our website TEMASOLUTION.COM
2013 NEW PROJECT TITLES LIST FOR MECHANICALtema_solution
We are Offering the projects in quality and low price with free projects class and demonstration classes. Further Details visit our website TEMASOLUTION.COM
The document lists 99 robotics projects from 2012, with codes ranging from ME001 to ME099. It provides contact information for Tema Solution, an engineering company located in Chennai, India that specializes in robotics projects. The projects cover areas like search and rescue robots, industrial robots, solar vehicles, military robots, and more. Visitors are directed to the company's website for more details on any of the listed projects.
The document lists 99 robotics projects from 2012, with codes ranging from ME001 to ME099. It provides contact information for Tema Solution, an engineering company located in Chennai, India that specializes in robotics projects. The projects cover areas like search and rescue robots, industrial robots, solar vehicles, military robots, and more. Visitors are directed to the company's website for more details on any of the listed projects.
The document lists 99 robotics projects from 2012, with codes ranging from ME001 to ME099. It provides contact information for Tema Solution, an engineering company located in Chennai, India that specializes in robotics projects. The projects cover areas like search and rescue robots, industrial robots, solar vehicles, military robots, and more. Visitors are directed to the company's website for more details on any of the listed projects.
The document lists 99 robotics projects coded from ME001 to ME099 and developed in 2012. It provides contact information for Tema Solution, a company located in Chennai, India that specializes in robotics projects. The list includes projects like human detection robots, solar vehicles, path finding robots, and more that address applications like search and rescue operations, industrial automation, military, and more. Visitors are directed to the company's website for more details on any of the projects.
The document lists 99 robotics projects from 2012, with codes ranging from ME001 to ME099. It provides contact information for Tema Solution, an engineering company located in Chennai, India that specializes in robotics projects. The projects cover areas like search and rescue robots, industrial robots, solar vehicles, military robots, and more. Visitors are directed to the company's website for more details on any of the listed projects.
1. Dumpers and dump trucks are vehicles used to transport bulk materials. Dumpers have the load skip in front of the driver that tips to dump the load, while dump trucks have the cab in front of the load.
2. Modern dumpers can carry payloads of up to 10 tons and usually steer by articulating in the middle. They are powered by diesel engines and use hydraulics for tipping, steering, and body lifting. Larger dump trucks ranging from 10-400 tons are used for construction and mining to transport materials over long distances.
3. There are different types of dump trucks including rear dump, bottom dump, articulated, and tipper trucks which are suited to different haul
IGSLabs Technologies offers an internship program managed by industry professionals to enhance employability. They provide project ideas and abstracts for students' final year projects with expertise in various technologies like embedded systems, robotics, Android, and more. Projects are available for engineering, diploma, MCA/BCA and science students across mechanical, automobile, production, automation, renewable energy, pneumatic, hydraulic, and agriculture domains. IGSLabs aims to assist students in their final year projects through their dedicated team of professionals.
This document provides a list of over 100 potential mechanical engineering project ideas for students. It covers projects related to automobiles, mechanical production, automation/mechatronics, and fabrication/non-conventional energy. Some example projects included are an automatic rain-operated wiper for hovercrafts, a quadcopter, regenerative braking systems, automated metro trains, pick and place robots for industrial applications, line following robots with forklifts, and wind or solar power generation devices. The projects are intended for third or fourth year students and cover a wide range of mechanical and engineering topics.
Are you looking best Final year ece projects in Bangalore.Embedded Innovation Lab is the right place for Learning real time projects. Select Right project and will get high marks.
Mechanical projects List 2014 By TechnogroovyTechnogroovy
like our page for more updates:
https://www.facebook.com/Technogroovyindia
With Best Regard's
Technogroovy Systems India Pvt. Ltd.
www.technogroovy.com
Call- +91-9582888121
Whatsapp- +91-8800718323
The document lists 211 potential topics for projects related to fabrication or design and fabrication of machines, systems, or components across various industries including agriculture, manufacturing, material handling, and more. The topics involve both conventional and non-conventional methods and applications of technologies like pneumatics, hydraulics, electricity, and more. They range from small individual components to entire machines, systems, and processes.
This document provides a list of 241 automation and mechanical engineering projects developed by PIC Automation. The projects cover various applications including automobile systems, industrial automation, pneumatic and hydraulic systems, 3D printing, robotics, and renewable energy. Example projects include an automatic differential locking system for vehicles, a PLC-based multi-machine lubrication system, solar air coolers, and a pick-and-place robot controlled by a PLC or cell phone. PIC Automation is located in Chennai, India and can be contacted for more details on any of the listed projects.
The document lists 65 potential mechanical engineering project topics related to automobiles and transportation. Some highlights include projects involving developing an automatic accident avoiding system, GPS vehicle tracking system, intelligent mobile robot navigation, electric vehicle designs, and fabricating systems like turbo chargers, hydraulic brakes, and vehicle jacks. Overall the document provides a wide range of ideas for projects involving designing and building automated systems, vehicles, and components related to automotive and transportation applications.
Automatic pneumatic brake & bumper for 4 wheelar pptyogesh_17
This document describes the design of an automatic pneumatic bumper activation system for vehicles. The system uses IR sensors to detect obstacles within 4 feet of the vehicle. When an obstacle is detected, the control unit activates the pneumatic bumper system to protect the vehicle and its occupants. Key parts of the system include IR transmitter and receiver circuits, a control unit, pneumatic cylinder, bumper, and frame. The pneumatic system is used to safely stop the vehicle using compressed air or gas when an obstacle is too close.
This document lists over 100 mechanical, automobile, and robotics projects proposed by Newage Technologies & Solutions. It provides contact information for Newage, including their address in Kallakurichi and email/phone. The projects are listed over 8 pages and include ideas like a pedal-powered water purifier, automated drilling machines, hybrid vehicles, medical wheelchairs, and various industrial robots.
This document describes a pneumatic three axis modern trailer system. It contains sections on pneumatic cylinders, elements of the system like the air compressor, cylinder, control valve, and vehicle frame. It explains how the system works using compressed air and a control valve to activate pneumatic cylinders that provide lifting. The system offers advantages like lower lifting costs and less power consumption compared to traditional methods. It has applications in lifting vehicles and cranes. The goal is to provide easier unloading of trailers, especially in difficult areas, to reduce time and fuel usage.
The document describes an automatic hydraulic jack project. It provides background on hydraulics, including Pascal's law and the relationship between pressure, force and area. It then discusses the basic components of a hydraulic system, including a pump, motor, valves, conduits and controller. The project uses syringes to act as actuators and directional control valves. Water is used as the transmission medium, with the syringes working together to lift a load automatically via gears, a motor and controller. Advantages include easy operation and control while disadvantages include potential rupturing losing needed pressure.
Babic components of hydraulic & pneumatic systemswakurets_21
The document discusses the basic components and applications of hydraulic and pneumatic systems. It describes the main types of hydraulic and pneumatic actuators including linear actuators like cylinders, and rotary actuators like motors. It also explains the different types of valves used in hydraulic and pneumatic circuits including directional control valves, flow control valves, and pressure control valves. The purpose and basic operation of common valve types are provided like poppet valves, spool valves, needle valves, check valves, and relief valves.
The document provides a list of 177 mechanical engineering project titles from 2012 related to various topics like automobile, robotics, mechatronics, and their corresponding codes. It also includes contact information for Temasolutions, the organization providing the list. The projects range from fabrication of equipment like solar air coolers to intelligent systems like autonomous navigation robots and automatic vehicle control systems.
2013 NEW PROJECT TITLES LIST FOR MECHANICAL TITLEStema_solution
We are Offering the projects in quality and low price with free projects class and demonstration classes. Further Details visit our website TEMASOLUTION.COM
2013 NEW PROJECT TITLES LIST FOR MECHANICALtema_solution
We are Offering the projects in quality and low price with free projects class and demonstration classes. Further Details visit our website TEMASOLUTION.COM
The document lists 99 robotics projects from 2012, with codes ranging from ME001 to ME099. It provides contact information for Tema Solution, an engineering company located in Chennai, India that specializes in robotics projects. The projects cover areas like search and rescue robots, industrial robots, solar vehicles, military robots, and more. Visitors are directed to the company's website for more details on any of the listed projects.
The document lists 99 robotics projects from 2012, with codes ranging from ME001 to ME099. It provides contact information for Tema Solution, an engineering company located in Chennai, India that specializes in robotics projects. The projects cover areas like search and rescue robots, industrial robots, solar vehicles, military robots, and more. Visitors are directed to the company's website for more details on any of the listed projects.
The document lists 99 robotics projects from 2012, with codes ranging from ME001 to ME099. It provides contact information for Tema Solution, an engineering company located in Chennai, India that specializes in robotics projects. The projects cover areas like search and rescue robots, industrial robots, solar vehicles, military robots, and more. Visitors are directed to the company's website for more details on any of the listed projects.
The document lists 99 robotics projects coded from ME001 to ME099 and developed in 2012. It provides contact information for Tema Solution, a company located in Chennai, India that specializes in robotics projects. The list includes projects like human detection robots, solar vehicles, path finding robots, and more that address applications like search and rescue operations, industrial automation, military, and more. Visitors are directed to the company's website for more details on any of the projects.
The document lists 99 robotics projects from 2012, with codes ranging from ME001 to ME099. It provides contact information for Tema Solution, an engineering company located in Chennai, India that specializes in robotics projects. The projects cover areas like search and rescue robots, industrial robots, solar vehicles, military robots, and more. Visitors are directed to the company's website for more details on any of the listed projects.
The document lists 99 robotics projects from 2012, with codes ranging from ME001 to ME099. It provides contact information for Tema Solution, an engineering company located in Chennai, India that specializes in robotics projects. Interested parties can visit the company's website or contact them directly for more details on any of the listed projects.
The document lists 67 robotics projects from 2012 with codes ranging from ME001 to ME067. It provides the project title and code for each one. The projects focus on areas like search and rescue robots, inspection robots, solar vehicles, voice controlled robots, and more. The document also provides contact information for Temasolution, the organization offering these robotics projects.
The document lists 67 robotics projects with codes and years. The projects include search and rescue robots, inspection robots, solar vehicles, voice controlled robots, visitor guided robots, pick and place robots, and more. The projects were developed by Temasolutions, an engineering firm located in Chennai, India. Contact information is provided at the top for those seeking more details on the projects.
The document lists 67 robotics projects from 2012 with codes ranging from ME001 to ME067. It provides the project title and code for each one. The projects focus on areas like search and rescue robots, inspection robots, solar vehicles, voice controlled robots, and more. The document also provides contact information for Temasolution, the organization offering these robotics projects.
The document lists 99 robotics projects from 2012, with codes ranging from ME001 to ME099. It provides contact information for Tema Solution, an engineering company located in Chennai, India that specializes in robotics projects. The projects cover areas like search and rescue robots, industrial robots, solar vehicles, military robots, and more. Visitors are directed to the company's website for more details on any of the listed projects.
MINI PROJECT CATLOG FOR MECHANICAL , AUTOMOBILE, Mechatronics &ROBOTICS PROJECT mechvignesan
The document lists over 150 potential mechanical and automobile engineering projects for students at the Mayugam Infotech Final Year Project Training Institute. The projects are numbered ME001 through ME0150 and AG001 through AG050 and include designs and fabrications related to machines, tools, vehicles, agricultural equipment, and more. Contact information is provided at the top for the institute.
MECHANICAL PROJECTS IN PONDICHERRY, 2020-21 MECHANICAL PROJECTS IN CHE...Nexgen Technology
Nexgen Technology Address:
Nexgen Technology
No :66,4th cross,Venkata nagar,
Near SBI ATM,
Puducherry.
Email Id: mailtonexgentech@gmail.com.
www.nexgenproject.com
Mobile: 9791938249,9025656779
NEXGEN TECHNOLOGY as an efficient Software Training Center located at Pondicherry with IT Training on IEEE Projects in Android,IEEE IT B.Tech Student Projects, Android Projects Training with Placements Pondicherry, IEEE projects in pondicherry, final IEEE Projects in Pondicherry , MCA, BTech, BCA Projects in Pondicherry, Bulk IEEE PROJECTS IN Pondicherry.So far we have reached almost all engineering colleges located in Pondicherry and around 90km
electromagnetic braking system by Indrakumar R Padwani.pdfINDRAKUMAR PADWANI
This document provides information about an electromagnetic braking system project report. It includes a title page, certificate of completion signed by faculty, an acknowledgments section thanking those who provided guidance, and an abstract summarizing the project. The project aims to create an electromagnetic braking system model capable of applying brakes without friction loss by using magnetic force and inducing eddy currents to slow rotation. It also includes sections on introduction, literature review, problem definition, block diagram, design, construction, parts, advantages/disadvantages, conclusion, and references.
This document outlines the design of a vehicle called the CAR-O-BIKE that can transform between a four-wheeled configuration and two detached two-wheeled configurations. The key modules that control the vehicle include an Electronic Control Module, Vehicle Control Module, fault detecting unit, and vehicular ad-hoc network. The design has several advantages such as being cost effective, environmentally friendly with no emissions, safe due to a mesh structure body, and time saving through the use of an ad-hoc network to provide optimal routes. Additional supporting factors and annexes with diagrams are also included to further explain the design.
The document appears to be from Tema Solution, providing their contact information and listing 31 power electronics projects from 2012-2011. It includes the project title, code, and year for each project focused on topics like renewable energy, energy storage, grid integration, and power quality compensation technologies. More details on the projects can be found on Tema Solution's website by contacting them.
This document contains a list of 17 projects from 2011-2012 related to wireless networks and technologies. The projects focus on topics like load balancing in wireless sensor networks, secure routing, peer-to-peer networks, cognitive radio networks, resource allocation in OFDMA systems, network planning for cellular systems, and spectrum sensing for cognitive radio. The document provides the titles and years for each of the listed projects.
The document lists proposed mini project titles related to the design and fabrication of various fixtures, jigs, clamps, and machines for manufacturing processes. The projects involve creating fixtures and jigs to securely hold workpieces for operations like milling, drilling, and cutting, as well as designing and building machines like hydraulic jacks, presses, and lifting tables.
The document discusses several MCA projects including:
1) A medical information integration model using cloud computing to provide storage and computing capacity for medical data analysis.
2) A customer relationship and warehouse management system to optimize revenue and customer satisfaction.
3) An issue tracking, managing, monitoring and reporting system for an IT department.
This document lists several Java/J2EE/J2ME projects related to utility computing environments, schema matching, fuzzy ontology generation, wireless sensor networks, wireless MAC protocols, distributed cache updating, selfish routing, collaborative key agreement, TCP congestion control, global roaming in mobile networks, GPS-based emergency response systems, network intrusion detection, honey pots, voice over IP, vehicle tracking, SIP-based teleconferencing, online security systems, and location-aided routing in ad hoc networks. The projects cover a wide range of topics related to distributed systems, wireless networks, and Internet applications.
The document discusses several .NET based application projects, including:
1) A remote data access and enterprise manager tool that simplifies database administration.
2) An online bookstore that allows administrators to manage products and customers to search, order, and view order history.
3) Additional projects cover content management on WAP devices, database-free information retrieval using XML, logistics supply chain management, and more.
The document contains a list of 23 projects with their titles, codes, and year. The projects relate to topics in business administration such as customer satisfaction, job satisfaction, wage administration, employee safety, marketing, training and development, supplier relationships, recruitment, and employee engagement. The document also provides contact information for Temasolution, the organization that compiled the list of projects.
The document lists 37 papers related to image processing and 32 papers related to MATLAB communication. The papers are from 2012 and cover topics such as object tracking, image fusion, biometrics, segmentation, and feature extraction. Codes are provided to identify each paper (e.g. MAT01, MC01).
This document contains a table listing 14 projects with their titles, domains, platforms, and years. It provides contact information for Tema Solution at the top, including their address, phone number, website, and email. The projects cover various technical domains including cloud computing, image processing, neural networks, networking, and secure computing. They involve technologies such as Java, cloud computing, and parallel/distributed systems. The years of the projects range from 2012-2017.
This document contains a list of 43 VLSI projects from 2012, with titles and codes for each project. It provides contact information for Tema Solution, including their address, phone number, website, and email for requesting more details about the VLSI projects. Visitors to the website can learn more about the projects listed.
This document contains a list of 127 image processing projects from 2012 with codes ranging from MAT01 to MAT127. It provides contact information for Temasolution, an organization that specializes in image processing projects. Visitors can find more details on the projects by visiting the listed website or contacting info@temasolution.com.
This document contains a list of 123 projects from 2012 across various domains including cloud computing, knowledge and data engineering, mobile computing, network security, network routing, network attack and induction detection, and more. Each project is given a unique code and covers technical topics such as secure cloud storage, mobile cloud architectures, network intrusion detection, traffic analysis, and topology management. Contact details are provided at the top for more information.
The document provides a list of printed circuit boards (PCBs), RF boards, interface boards, sensors, and wireless boards available from Tema Solutions located in Chennai, India. It includes over 30 PCB designs, 16 RF boards, 18 interface boards, 36 types of sensors, and 8 GSM/GPRS/GPS boards. Tema Solutions offers custom hardware design and manufacturing services.
email : temasolution@gmail.com
The document provides information on various embedded and biomedical projects available from Temasolution, an embedded systems company. It lists over 70 project codes covering areas like embedded projects, ARM controller projects, communication protocols, biomedical projects, and more. Each project code provides a 1-2 line description of the project. The document also provides contact information for Temasolution.
This document lists 28 projects from 2012 across various domains including cloud computing, networking, parallel and distributed systems, secure computing, wireless communication, multimedia, data mining, image processing, and internet computing. It provides the project title, domain, and year for each project. Contact information is also provided for Temasolution, the organization associated with these projects.
The document lists 19 building projects from 2012 with codes and titles like hostel, guest house, primary school. It provides contact information for Tema Solution, an engineering firm located in Chennai, India that offers planning, designing, and cost estimation services. The document directs the reader to the company website for more details on the projects and how to request information from Tema Solution.
The document lists 25 projects from 2012 related to planning, designing, and estimating buildings and structures. It includes projects for a hospital building, apartment building, marriage hall, hotel, jewelry building, IT park, restaurant, bank, car showroom, shopping mall, school, college, stadium, library, precast bridge, computer center, aquarium, underground building, subway with shops, box girder bridge, bridge I section, bridge T section, flyover, railway station, and airport building. It also provides contact information for the company Temasolution.
Automobile and hydraullic and pneumatic titles for 2012Soundar Msr
The document lists 167 mechanical engineering projects related to automobiles and hydraulic/pneumatic systems from 2012. The projects are listed with a project title, code, and year. They cover a wide range of automotive topics including engines, braking systems, emissions control, and alternative energy vehicles. Many projects also involve hydraulic or pneumatic systems for applications like lifting, cutting, and pressing.
The document discusses 6 projects related to mobile application development using Android platform. The projects are in domains like information science, wireless technologies, education, and information technology. They address topics such as image watermarking using Walsh coding, visual interactive and location based mobile learning, mine safety information system, teaching smartphone programming, violence mapping in social networks, and speed/direction estimation using GSM handovers.
This document contains a list of 43 VLSI projects from 2012, with titles and codes for each project. It provides contact information for Tema Solution, including their address, phone number, website, and email for requesting more details about the VLSI projects. Visitors to the website can learn more about the projects listed.
Automobile and hydraullic and pneumatic titles for 2012
1. 28,South Usman Road,, TNagar,
Chennai-17. Ph : 044-43855940
Mobile : +91-9042085008
Web : www.temasolution.com
email : temasolution@gmail.com
S.NO PROJECT TITLE CODE YEAR
AUTOMOBILE
1. Electrical Power generation and refrigeration by using waste heat from IC ME001 2012
engine
2. Fabrication of Air engine with D.C air compressor ME002 2012
3. Fabrication of Automatic pneumatic disc braking system ME003 2012
4. Advanced electric car with regenerative braking & digital locking System ME004 2012
5. Fabrication of Twin cylinder electromagnetic vehicle engine ME005 2012
6. Fabrication of turbo charger for two wheeler ME006 2012
7. Automatic side stands with breaking locking system ME007 2012
8. Fabrication of Multiple Car safety system in bumper ME008 2012
9. Fabrication of Eddy current braking system ME009 2012
10. Fabrication of weighing bridge in moving vehicle ME010 2012
11. Generation of electricity using the flow or velocity of Vehicle exhaust gas ME011 2012
12. Intelligent secure and privacy parking through IR sensor ME012 2012
13. Fabrication of Variable volume engine ME013 2012
14. Over speed indication and Automatic accident Avoiding System for four ME014 2012
wheeler
15. Dual power generation system for Automobile (thermoelectric + exhaust gas ME015 2012
power generation)
16. Fabrication of Segway (Running model) ME016 2012
17. Visual landing gear arrangement with Tyre Pressure Inflation system for Aero ME017 2012
plane
18. Fabrication of Safety mechanism for vehicle (clutch lock) ME018 2012
19. Integrated drunk and drive prevention system ME019 2012
20. Fabrication of Anti theft steering system ME020 2012
21. Joystick control car drive mechanism for physically challenged people ME021 2012
22. Fabrication of three axis pneumatic modern trailer ME022 2012
23. Fabrication of Magnetically Levitated Train ME023 2012
Further more details visit : http://www.temasolution.com/downloads.html
send your request to : info@temasolution.com
2. 28,South Usman Road,, TNagar,
Chennai-17. Ph : 044-43855940
Mobile : +91-9042085008
Web : www.temasolution.com
email : temasolution@gmail.com
24. Experimental investigation of an air conditioning system drive by LPG engine ME024 2012
25. Fabrication of four wheel steering system ME025 2012
26. Fabrication of Cooling jacket for motorcycle ME026 2012
27. Automatic Electro-Magnetic gear transmission for two wheeler ME027 2012
28. Automatic clutch and brake system for four wheeler ME028 2012
29. Fabrication of electro-magnetic Engine ME029 2012
30. Fabrication of Go Ped Drive (Go Ped Scooter) ME030 2012
31. Emission tester (CO2) for automobile ME031 2012
32. Automatic head light dim and bright controller with engine overheating alarm ME032 2012
33. Efficient Car Parking System for four wheeler ME033 2012
34. Fabrication of Hydrogen Engine with load test ME034 2012
35. Emission control in two stroke petrol engine by using multiple spark ME035 2012
36. Sterling engine with parabolic collector (Model) ME036 2012
37. Automatic Vehicle Locking system by Without Helmet ME037 2012
38. Fabrication of Multi Nut (Wheel) Tighter and Looser ME038 2012
39. Button operated electro-magnetic gear shifting system for two wheeler ME039 2012
40. Fabrication of personal mover with engine ME040 2012
41. Fabrication of Buggy with solar hybrid vehicle ME041 2012
42. Automatic Rain Operated Wiper ME042 2012
43. Fabrication of Automatic pneumatic jack ME043 2012
44. Air compressor using crank and slotted link mechanism ME044 2012
45. GPS based automatic vehicle accident information system ME045 2012
46. Elimination of chain drive in by-cycle ME046 2012
47. Fabrication of Dual Brake Single liver System for two wheeler ME047 2012
48. Fabrication of Air Engine ME048 2012
Further more details visit : http://www.temasolution.com/downloads.html
send your request to : info@temasolution.com
3. 28,South Usman Road,, TNagar,
Chennai-17. Ph : 044-43855940
Mobile : +91-9042085008
Web : www.temasolution.com
email : temasolution@gmail.com
49. Regenerative braking using pneumatic interface ME049 2012
50. Fabrication of Electro Magnetic suspension ME050 2012
51. Fabrication of vehicle turn table ME051 2012
52. Fabrication of Digital Gear Level Indicator for Four Wheeler ME052 2012
53. Fabrication of Hydraulic Break show riveting Machine ME053 2012
54. Fabrication of Pneumatic Disc Braking System (PDBS) ME054 2012
55. Fabrication of Mini Jet Engine ME055 2012
56. Quick lifting jack with Gear Arrangement ME056 2012
57. Fabrication of Motorized Screw Jack ME057 2012
58. Fabrication of digital hydraulic jack ME058 2012
59. Pedal Operated cell phone charger ME059 2012
60. Automatic reserve indication system ME060 2012
61. Fabrication of Six stroke engine (model) ME061 2012
62. Shock observer power generation system ME062 2012
63. Fabrication of Nitrogen Air vehicle with load test ME063 2012
64. Fabrication Automatic lawn mover ME064 2012
65. Fabrication of Automatic steering control system for automobile ME065 2012
66. Automatic Visitor Guided with material handling Vehicle ME066 2012
67. Fabrication of Solar Hybrid Car ME067 2012
68. Highways High Speed Indication and automatic Pneumatic Braking System ME068 2012
69. Automatic pneumatic vulcanizing Machine ME069 2012
70. GPS based vehicle root tracking system ME070 2012
71. Fabrication of Foldable two wheeler ME071 2012
72. Automatic Rain operated wiper and Head light Dim/Bright Controller ME072 2012
73. Fabrication of Foldable Electric Go Ped Two wheeler ME073 2012
Further more details visit : http://www.temasolution.com/downloads.html
send your request to : info@temasolution.com
4. 28,South Usman Road,, TNagar,
Chennai-17. Ph : 044-43855940
Mobile : +91-9042085008
Web : www.temasolution.com
email : temasolution@gmail.com
74. Automatic Break Failure indicator and Engine Over Heating Alarm ME074 2012
75. Fabrication of Automatic Railway Gate Controller ME075 2012
76. Fabrication of Digital Fuel Level Indicator ME076 2012
77. Elimination of carbon particles from exhaust gas ME077 2012
78. Fabrication of Automatic car overtaking system ME078 2012
79. Remote controlled scrap collecting vehicle ME079 2012
80. Fabrication of common rail direct injection (CRDI Model) ME080 2012
81. Fabrication of Voice Controlled Wheel Chair ME081 2012
82. Fabrication of wireless tyre pressure monitoring system ME082 2012
83. Efficiency increasing system by using preheating method ME083 2012
84. Fabrication of Electronic ignition system ME084 2012
85. Remote controlled tilting handicapped wheel chair ME085 2012
86. Fabrication of Adaptive breaking system ME086 2012
87. Electro-Hydraulic Braking (EHB) system for Four Wheeler ME087 2012
88. Electro-Hydraulic Braking (EHB) system for Four Wheeler ME088 2012
89. Fabrication of brown gas Engine ME089 2012
90. Fabrication of king star electrical vehicle ME090 2012
91. Fabrication of Automatic Magnetic Accident preventer for Train ME091 2012
92. Shock Absorber test rig using cam and sensors ME092 2012
93. Fabrication of Solar Race Car ME093 2012
94. Fabrication of Electric Two Wheeler ME094 2012
95. Railways accident Avoiding System (Level crossing and Fire Alarm) ME095 2012
96. Fabrication of Two Engine Synchronization for Four Wheeler ME096 2012
97. Fabrication of oil pump and water pump for jeep and tractor ME097 2012
98. Fabrication of Hybrid Vehicle ME098 2012
Further more details visit : http://www.temasolution.com/downloads.html
send your request to : info@temasolution.com
5. 28,South Usman Road,, TNagar,
Chennai-17. Ph : 044-43855940
Mobile : +91-9042085008
Web : www.temasolution.com
email : temasolution@gmail.com
99. Fabrication of exhaust gas heat recovery power generation system ME099 2012
100. Fabrication of self starter for TVS XL ME100 2012
101. Intelligent Braking System in Four Wheeler (IBS) ME101 2012
102. Emergency Braking System in Four Wheeler (EBS) ME102 2012
103. Anti-Lock Braking System In Four wheeler (ABS) ME103 2012
104. Water fuel engine with power generation ME104 2012
105. Automatic Vehicle Accident Information System ME105 2012
106. Fabrication of Sand Collecting Vehicle ME106 2012
107. Automatic head lamp alignment system with Dim/Bright Controller ME107 2012
108. Automatic Vehicle Over speed controlling system for School Zone ME108 2012
109. Smart shock absorber for automobile ME109 2012
HYDRAULIC & PNEUMATIC BASED PROJECTS
110. Pneumatic bumper with automatic braking system ME110 2012
111. Fabrication of coconut tree sprayer ME111 2012
112. Pneumatic can crushing machine ME112 2012
113. Auto Indexing gear cutting attachment for pneumatic shaping Machine ME113 2012
114. Pneumatic brick making machine ME114 2012
115. Automatic bar feeding mechanism for hack saw machine ME115 2012
116. Fabrication of Pneumatic Leaf-Cup Making Machine ME116 2012
117. Fabrication of Hydraulic tail stock ME117 2012
118. Pneumatic acrylic sheet bending machine ME118 2012
119. Fabrication of Automatic Electro hydraulic Jack ME119 2012
120. Automatic side stands with breaking locking system ME120 2012
121. Fabrication of Hydraulic Pallet Truck ME121 2012
122. Quick Lifting hydraulic jack with gear arrangement ME122 2012
Further more details visit : http://www.temasolution.com/downloads.html
send your request to : info@temasolution.com
6. 28,South Usman Road,, TNagar,
Chennai-17. Ph : 044-43855940
Mobile : +91-9042085008
Web : www.temasolution.com
email : temasolution@gmail.com
123. Fabrication of hydraulic pipe clamp pressing machine ME123 2012
124. Air compressor using crank and slotted link mechanism ME124 2012
125. Pneumatic Automatic sheet Cutting Machine ME125 2012
126. Fabrication of Pneumatic Slotting Machine ME126 2012
127. Pneumatic press for coconut pith blocking machine ME127 2012
128. Automatic differential unit locking System ME128 2012
129. Automatic Pneumatic Chapatti making machine ME129 2012
130. Compressed air production using vehicle suspensor ME130 2012
131. Book reading aid for handicapped People ME131 2012
132. Electronic Assisted hydraulic breaking system ME132 2012
133. Fabrication of Pneumatic punch die ME133 2012
134. Automatic pneumatic reciprocating grinding machine ME134 2012
135. Fabrication of Double axis pneumatic JCB Equipment ME135 2012
136. Single lever pneumatic disc braking system in two wheelers ME136 2012
137. D & F of Hydraulic Lift with Pressure Booster ME137 2012
138. Hydraulic Scissor plat form Machine With Power Pack ME138 2012
139. Three axis Hydraulic Modern Trailer ME139 2012
140. Automatic Electro Hydraulic Braking System ME140 2012
141. Fabrication of gear tooth grinding machine ME141 2012
142. Fabrication of Pneumatic 4-axis JCB Equipment ME142 2012
143. Automatic pneumatic Spring End Grinding Machine ME143 2012
144. Fabrication of Pneumatic Bycivator ME144 2012
145. Pneumatic automatic Vegetable Cutting Machine ME145 2012
146. Pneumatic Multipurpose Grinding Machine ME146 2012
147. Automatic conveyor based stamping machine ME147 2012
Further more details visit : http://www.temasolution.com/downloads.html
send your request to : info@temasolution.com
7. 28,South Usman Road,, TNagar,
Chennai-17. Ph : 044-43855940
Mobile : +91-9042085008
Web : www.temasolution.com
email : temasolution@gmail.com
148. Fabrication of Automatic Pneumatic Hammer ME148 2012
149. Automatic paint spraying Equipment ME149 2012
150. Fabrication of Hydraulic Ladde ME150 2012
151. D & F of Pneumatic Auto Feed Punching Machine ME151 2012
152. Fabrication of Hybrid driver seat ME152 2012
153. Pneumatic Bending/Bend Removing Machine ME153 2012
154. Highways high Speed sensing and Automatic Pneumatic braking System ME154 2012
155. Fabrication of over head crane ME155 2012
156. Automatic Paint marking machine for industries ME156 2012
157. Automatic Distance Measurement and Braking System By using Ultrasonic ME157 2012
Waves
158. Fabrication of Hydraulic Break show Riveting Machine ME158 2012
159. Hydraulic operated adaptive breaking system ME159 2012
160. Fabrication of Pneumatic Belt Conveyor ME160 2012
161. Fabrication of pneumatic cargo weight lifter ME161 2012
162. Fabrication of Pneumatic trainer kit with air compressor ME162 2012
163. Automatic hydro-pneumatic Lubrication System ME163 2012
164. D & F of Pneumatic Multipurpose Press System ME164 2012
165. Finger print based Anti theft steering system ME165 2012
166. Hydraulic hybrid system for four wheeler ME166 2012
167. Fabrication of Pneumatic Multipurpose Machine ME167 2012
168. Hydro-Pneumatic Vice with Pressure Booster ME168 2012
169. Automatic Pneumatic punching and riveting Machine ME169 2012
170. Fabrication of Motorized Hydraulic Jack ME170 2012
171. Fabrication of Hydraulic Lift with Power pack ME171 2012
172. Pneumatic Auto feed Drilling Machine ME172 2012
Further more details visit : http://www.temasolution.com/downloads.html
send your request to : info@temasolution.com
8. 28,South Usman Road,, TNagar,
Chennai-17. Ph : 044-43855940
Mobile : +91-9042085008
Web : www.temasolution.com
email : temasolution@gmail.com
173. Pneumatic operated Conveyor Automation ME173 2012
174. D & F of Hydraulic Press with Power Pack ME174 2012
175. Automatic Pneumatic Stand for two wheeler ME175 2012
176. Fabrication of Mini Hydraulic Hand Operated Zip Crane ME176 2012
177. Fabrication of Pneumatic Mobile Crane ME177 2012
178. Pneumatic Operated Emergency Braking System (EBS) ME178 2012
179. Pneumatic Operated Intelligent Braking System (IBS) ME179 2012
180. Pneumatic Operated Anti-Lock Braking System (ABS) ME180 2012
181. Mirror cutting machine by using compressed air ME181 2012
182. Automatic Pneumatic Bottle Washing machine ME182 2012
183. D & F of Pneumatic Injection Moulding Machine ME183 2012
184. Fabrication of automatic multi point grease gun ME184 2012
185. Pedal operated hydro pneumatic vice ME185 2012
186. D & F of Pneumatic Automatic Printing Press ME186 2012
187. Fabrication of Automatic packing Control Machine ME187 2012
188. Pneumatic Auto Feed Riveting Machine ME188 2012
189. D & F of Mini Hydraulic Press ME189 2012
190. Automatic pneumatic bumper for four wheeler ME190 2012
191. Machining Time Reduction in Pneumatic shaping Machine ME191 2012
192. Fully Automated Hydraulic crane ME192 2012
193. Automatic PVC pipe feeding and cutting machine ME193 2012
194. Fabrication of pneumatic disc brake ME194 2012
195. Fabrication of Pneumatic Auto gear changer ME195 2012
196. Automatic pneumatic Jack for Four Wheeler ME196 2012
197. Fabrication of Hydraulic Pipe Bending Machine ME197 2012
Further more details visit : http://www.temasolution.com/downloads.html
send your request to : info@temasolution.com
9. 28,South Usman Road,, TNagar,
Chennai-17. Ph : 044-43855940
Mobile : +91-9042085008
Web : www.temasolution.com
email : temasolution@gmail.com
198. Pneumatic operated ladle tilting mechanism for foundries ME198 2012
199. Fabrication of Cam less air compressor ME199 2012
200. D & F of Hydraulic Scissor Lifter ME200 2012
201. Fabrication of hydro coupling mechanism ME201 2012
202. D & F of Pneumatic reciprocating Hack saw Machine ME202 2012
203. Automatic Reverse locking system using differential unit ME203 2012
204. Fabrication of hydraulic machine vice ME204 2012
205. Fabrication of automatic Multi-purpose press ME205 2012
206. Intelligent Active Suspension system for two wheeler ME206 2012
207. Automatic Sensor Operated Pneumatic Braking System ME207 2012
208. Fabrication of Hydraulic oil pump testing Equipment ME208 2012
209. Pneumatic Operated Inspection conveyor ME209 2012
210. Fabrication of Hydraulic fork lift ME210 2012
211. D & F of Automatic Pneumatic Riveting Machine ME211 2012
212. Accident avoiding System for Punching Machine ME212 2012
213. Hybrid power consumption in train with pneumatic bumper ME213 2012
214. Pneumatic Auto feed Metal Forming Machine ME214 2012
215. Fabrication of Hydraulic Trolley Type Jack ME215 2012
216. Fabrication of Paper Cup Making Machine ME216 2012
217. Automatic sensor based wall painting Robot ME217 2012
218. Fabrication of Radial Plunger Pump ME218 2012
219. Fabrication of three axis pneumatic Modern Trailer ME219 2012
220. Pneumatic Reciprocating Water Pumping System ME220 2012
221. Fabrication of Sticker Making Machine ME221 2012
222. Pneumatic Cold Chamber Die Casting Machine ME222 2012
Further more details visit : http://www.temasolution.com/downloads.html
send your request to : info@temasolution.com
10. 28,South Usman Road,, TNagar,
Chennai-17. Ph : 044-43855940
Mobile : +91-9042085008
Web : www.temasolution.com
email : temasolution@gmail.com
223. Fabrication of Smart shock absorber ME223 2012
224. Fabrication of Auto feed pneumatic vice ME224 2012
225. Remote controlled car/bus Pneumatic door open/close mechanism ME225 2012
226. Automatic pneumatic vice and jack ME226 2012
227. Automatic Pick and Place paint spraying Equipment ME227 2012
228. D & F of Automatic Pneumatic Ramming Machine ME228 2012
229. Pneumatic Four (or) six axis material handling Robot ME229 2012
230. Automatic pneumatic double axis welding machine ME230 2012
231. Fabrication of Hydraulic Cylinder Liner Puller ME231 2012
232. Fabrication of Pneumatic Air engine ME232 2012
233. D & F of Pneumatic Bearing Press and Puller ME233 2012
234. Pneumatic Four-Axis Material Handling Equipment ME234 2012
235. Fabrication of Pneumatic Shaping Machine ME235 2012
236. Pneumatic Cutting and Grinding Machine ME236 2012
237. Electro hydraulic System for Automation in Vehicle ME237 2012
Further more details visit : http://www.temasolution.com/downloads.html
send your request to : info@temasolution.com