This document is a service manual that provides safety information, technical specifications, circuit diagrams, maintenance procedures, and instructions for operating and servicing PT-70 and PT-80 machines. It covers topics such as safety protocols, component specifications, hydraulic and electrical systems, routine maintenance tasks, machine controls, and removing/installing various cab and chassis components. The manual is intended to guide technicians in properly servicing and repairing these machines.
Asv st 50 scout tracked utility vehicle service repair manualfujskekfmsme
This document is a service manual for the ST-50 Rubber Track Utility Vehicle. It contains chapters covering safety, technical specifications, circuit diagrams, maintenance procedures, machine controls and instrumentation, removal and installation of components, and troubleshooting. The manual provides information needed to service the vehicle's engine, hydraulics, chassis, and other systems.
Asv sc 50 scout tracked utility vehicle service repair manualfujskekfmsme
This document is a service manual for the SC-50 Rubber Track Utility Vehicle. It contains chapters covering safety, technical specifications, circuit diagrams, maintenance, controls and instrumentation, component removal and installation procedures, and troubleshooting. The manual provides information needed to service and repair the machine.
Asv posi track rc-50 track loader service repair manualudfjjdjkkmds
The document is a service manual that provides safety information and procedures for disassembling and assembling various components of Rubber Track Loaders models RC-50 and RC-50 Turf Edition. It covers topics such as product safety, technical specifications, system diagrams, machine controls, disassembly/assembly of the operator enclosure, chassis, radiator/oil cooler, hydraulic reservoir, loader/transmission controls, transmission and drive systems, undercarriage, loader, maintenance procedures, hydraulic pressure checks and adjustments, and troubleshooting. The manual contains detailed instructions, diagrams and safety warnings for working on and servicing the loaders.
This document provides copyright information and instructions for performing self-diagnosis on the heating and air conditioning systems of Audi 100 vehicles from 1991. It includes sections on performing self-diagnosis using a fault reader on manually controlled and fully automatic air conditioning systems. Additional sections provide instructions for servicing, removing and installing heating and auxiliary heating components. The document is protected by copyright and copying is only permitted with authorization from AUDI AG.
This document is a service manual for the brake system of the 1991 Audi 100. It contains copyright information, a table of contents, and sections covering technical specifications, anti-lock brake system repair procedures, brake mechanics repair procedures, and illustrations of brake components. The document provides service technicians with information needed to properly service the brakes of the 1991 Audi 100.
Perkins 2000 series 2006 diesel engine(model 2006 tg1a)service repair manualfjjsjeusekkekm
This document provides instructions for servicing and repairing Perkins 2000 Series 6-cylinder diesel engines. It details procedures for removing and installing major engine components like the cylinder head, pistons, crankshaft, and fuel injection system. Safety precautions are also outlined. The document is intended as a workshop manual for mechanics working on these industrial diesel engines.
Asv posi track pt-60 track loader service repair manualudfjjdjkksemmd
This document provides an overview and table of contents for a service manual covering the disassembly and assembly of various components for a rubber track loader. The table of contents outlines 11 chapters that describe safety procedures, technical specifications, system diagrams, machine controls, and procedures for disassembling and reassembling components such as the operator enclosure, chassis, radiator/oil cooler, hydraulic reservoir, loader/transmission controls, transmission and drive systems, and undercarriage. Safety messages and precautions are emphasized for personal safety during maintenance and repair work.
Deutz fahr agroplus 60 tractor service repair manualfusjezsfkskefmsme
This workshop manual provides technicians with information for operating, inspecting, overhauling, and repairing tractors. It contains detailed instructions for dismantling and reassembling components, with a focus on the engine, clutch, transmission, axles, brakes, hydraulics, and electrical systems. The manual is intended as a reference for experienced mechanics to refresh their memory on repair procedures. It is recommended that authorized dealer mechanics keep this publication handy for consultation when performing repairs.
Asv st 50 scout tracked utility vehicle service repair manualfujskekfmsme
This document is a service manual for the ST-50 Rubber Track Utility Vehicle. It contains chapters covering safety, technical specifications, circuit diagrams, maintenance procedures, machine controls and instrumentation, removal and installation of components, and troubleshooting. The manual provides information needed to service the vehicle's engine, hydraulics, chassis, and other systems.
Asv sc 50 scout tracked utility vehicle service repair manualfujskekfmsme
This document is a service manual for the SC-50 Rubber Track Utility Vehicle. It contains chapters covering safety, technical specifications, circuit diagrams, maintenance, controls and instrumentation, component removal and installation procedures, and troubleshooting. The manual provides information needed to service and repair the machine.
Asv posi track rc-50 track loader service repair manualudfjjdjkkmds
The document is a service manual that provides safety information and procedures for disassembling and assembling various components of Rubber Track Loaders models RC-50 and RC-50 Turf Edition. It covers topics such as product safety, technical specifications, system diagrams, machine controls, disassembly/assembly of the operator enclosure, chassis, radiator/oil cooler, hydraulic reservoir, loader/transmission controls, transmission and drive systems, undercarriage, loader, maintenance procedures, hydraulic pressure checks and adjustments, and troubleshooting. The manual contains detailed instructions, diagrams and safety warnings for working on and servicing the loaders.
This document provides copyright information and instructions for performing self-diagnosis on the heating and air conditioning systems of Audi 100 vehicles from 1991. It includes sections on performing self-diagnosis using a fault reader on manually controlled and fully automatic air conditioning systems. Additional sections provide instructions for servicing, removing and installing heating and auxiliary heating components. The document is protected by copyright and copying is only permitted with authorization from AUDI AG.
This document is a service manual for the brake system of the 1991 Audi 100. It contains copyright information, a table of contents, and sections covering technical specifications, anti-lock brake system repair procedures, brake mechanics repair procedures, and illustrations of brake components. The document provides service technicians with information needed to properly service the brakes of the 1991 Audi 100.
Perkins 2000 series 2006 diesel engine(model 2006 tg1a)service repair manualfjjsjeusekkekm
This document provides instructions for servicing and repairing Perkins 2000 Series 6-cylinder diesel engines. It details procedures for removing and installing major engine components like the cylinder head, pistons, crankshaft, and fuel injection system. Safety precautions are also outlined. The document is intended as a workshop manual for mechanics working on these industrial diesel engines.
Asv posi track pt-60 track loader service repair manualudfjjdjkksemmd
This document provides an overview and table of contents for a service manual covering the disassembly and assembly of various components for a rubber track loader. The table of contents outlines 11 chapters that describe safety procedures, technical specifications, system diagrams, machine controls, and procedures for disassembling and reassembling components such as the operator enclosure, chassis, radiator/oil cooler, hydraulic reservoir, loader/transmission controls, transmission and drive systems, and undercarriage. Safety messages and precautions are emphasized for personal safety during maintenance and repair work.
Deutz fahr agroplus 60 tractor service repair manualfusjezsfkskefmsme
This workshop manual provides technicians with information for operating, inspecting, overhauling, and repairing tractors. It contains detailed instructions for dismantling and reassembling components, with a focus on the engine, clutch, transmission, axles, brakes, hydraulics, and electrical systems. The manual is intended as a reference for experienced mechanics to refresh their memory on repair procedures. It is recommended that authorized dealer mechanics keep this publication handy for consultation when performing repairs.
Daewoo doosan solar 420 lc v excavator operator and maintenance manualsoeldksejdksem
This document is an operation and maintenance manual for a Daewoo Solar 420LC-V excavator from 2001. It provides safety information and instructions for operating, maintaining, transporting, and storing the excavator. The manual includes sections on safety labels, lifting capacities, starting and operating the excavator, performing regular maintenance, and troubleshooting issues. Owners are advised to follow the safety precautions and maintenance schedules outlined in the manual.
Cummins onan dfha generator service repair manualjfksemdmmeazx
This document provides instructions and specifications for generator sets and their PowerCommand 3100 series controllers. It contains sections on introduction and overview, control operation, circuit boards and modules, troubleshooting, service and calibration, servicing the generator, day tank fuel transfer pumps, initial startup procedures, and an on-site power system application review for diesel generator systems running at 600VAC or lower. The document is an extensive technical manual for servicing and maintaining these generator sets and controllers.
New holland td60 d tractor service repair manualufusjejfjksekmm
This document is the service manual for TD60D-TD95D model tractors. It contains sections on general information, the engine, clutch, gearbox, transmission of motion, front and rear mechanical transmissions, power take-off, brakes, hydraulic systems, steering, axle and wheels, auxiliary equipment, electrical system, and cab. Each section provides specifications, removal and installation instructions, overhaul procedures, and troubleshooting information for the corresponding systems.
Toyota 7 bpue15 high level orderpicker service repair manualudfjjsjekdkdmm
This document is a service manual for the Toyota Orderpicker Model 7BPUE15 for serial numbers 80,001 and up. It contains sections on safety, systems overview, planned maintenance, troubleshooting, codes and tests, and component level procedures. The manual provides information and instructions for technicians to service and repair the orderpicker.
New holland tn95 fa tractor service repair manualufjjdkksmeme
This document is a service manual for TN75FA-TN85FA-TN95FA tractors. It contains sections on general guidelines, the engine, clutch, transmissions, and other systems. Each section provides specifications, diagrams, removal and installation instructions, and procedures for inspection and repair. The manual is intended exclusively for use by trained service technicians.
Crown lp3010 lift truck service repair manualfjskekdmmem
The document provides maintenance information for LP3010/3020 series trucks. It includes:
1) An overview of revisions made to the manual and specific pages.
2) Tables of contents listing maintenance and repair topics such as lubrication, hydraulics, drive unit, and electrical components.
3) Sections covering maintenance schedules, safety procedures, component access, lubrication points, hydraulic system repairs, and electrical component operation.
Perkins phaser 135 ti model al (euro 2) diesel engine service repair manualfjjsekkksmeik
This document provides a workshop manual for the Perkins Phaser 135 Ti 4 cylinder diesel engine. It contains specifications, instructions for disassembly and assembly of engine components, timing procedures, and safety information. The manual is divided into chapters covering the cylinder head, pistons and connecting rods, crankshaft, timing components, cylinder block, and other systems such as fuel, cooling, and aspiration.
Cummins onan dfhb generator service repair manualfksefkskemm
This document provides an overview and instructions for generator sets with PowerCommand 3100 controllers. It describes the system components, control operation including the control menu displays, troubleshooting procedures, service and calibration of the control and components. It also includes sections on initial system startup and testing procedures.
Cummins onan dfhd generator service repair manualfjsexswkfkmsem
This document provides an overview and instructions for generator sets with PowerCommand 3100 controllers. It describes the system components, control operation including the control menu displays, troubleshooting procedures, service and calibration of the control and components. It also includes sections on initial system startup and testing procedures.
ASV ST-50 Scout Tracked Utility Vehicle Service Repair Manual.pdffjdkksmemd
This document is a service manual for the ST-50 Rubber Track Utility Vehicle. It contains sections covering safety, technical specifications, circuit diagrams, maintenance, controls and instrumentation, component removal and installation procedures, troubleshooting, and more. The manual provides information and instructions for technicians to service and repair the vehicle.
ASV SC-50 Scout Tracked Utility Vehicle Service Repair Manual.pdffjdkksmemd
This document is a service manual for the SC-50 Rubber Track Utility Vehicle. It contains sections covering: safety overview; technical specifications; circuit diagrams; maintenance procedures like changing fluids and filters; controls and instrumentation; removing and installing components like tracks, pumps, and valves; troubleshooting; and specifications for replacement parts. The manual provides information and instructions for technicians to service and repair the vehicle.
Daewoo Doosan 330-III Excavator Service Repair Manual.pdfufjkskdmdmd
This document provides operation and maintenance instructions for a Daewoo excavator. It covers safety procedures, equipment specifications, maintenance and repair of various components. The document includes sections on safety practices for operation and lifting loads, maintenance procedures for hydraulic cylinders, pumps and other components, and specifications for the engine, hydraulic system, dimensions and lift capacity.
Toyota 8TB50 Pallet Truck Service Repair Manualuhjekm ioelpoe
This is the Highly Detailed factory service repair manual for theTOYOTA 8TB50 PALLET TRUCK, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.TOYOTA 8TB50 PALLET TRUCK Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
General Information
Safety
Systems Overview
Planned Maintenance
Troubleshooting
Messages and Codes
Component Procedures
Theory of Operation
Appendix
Index
Wire Diagrams
Parts Catalog
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveTOYOTA 8TB50 PALLET TRUCK Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
Yanmar 3 jh25a marine diesel engine service repair manualfjsekksmem
This document provides service information for the 3JH2 series marine diesel engines, including specifications, component diagrams, maintenance procedures, and troubleshooting guides. It has been revised twice to include additional engine models and technical updates. The manual covers general technical details, disassembly and repair of major engine systems, testing procedures, and part replacement torque specifications.
Yanmar 3 jh2 (b)e marine diesel engine service repair manualfjksekkmsemm
This document provides service information for the 3JH2 series marine diesel engines, including specifications, component diagrams, maintenance procedures, and troubleshooting guides. It has been revised twice to include additional engine models and technical updates. The manual covers general technical details, disassembly and reassembly processes, fuel injection systems, cooling systems, gearboxes, electrical systems, and other relevant topics for servicing these engines.
Yanmar 3 jh2 (b)e marine diesel engine service repair manualfjsekfsmeme
This document provides service information for the 3JH2 series marine diesel engines, including specifications, component diagrams, maintenance procedures, and troubleshooting guides. It has been revised twice to include additional engine models and technical updates. The manual covers general technical details, disassembly and repair of major engine systems, testing procedures, and part replacement torque specifications.
Yanmar 3 jh25a marine diesel engine service repair manualfjjsekkfksmem
This document provides service information for the 3JH2 series marine diesel engines, including specifications, component diagrams, maintenance procedures, and troubleshooting guides. It has been revised twice to include additional engine models and technical updates. The manual covers general technical details, disassembly and repair of major engine systems, fuel injection, cooling, gearboxes, electrical systems, and testing procedures.
Yanmar 3 jh30a marine diesel engine service repair manualfjskekfmsmem
This document provides service information for the 3JH2 series marine diesel engines, including specifications, component diagrams, maintenance procedures, and troubleshooting guides. It has been revised twice to include additional engine models and technical updates. The manual covers general technical details, disassembly and reassembly processes, fuel injection systems, cooling systems, gearboxes, electrical systems, and other relevant topics for servicing these engines.
Yanmar 3 jh2 t(b)e marine diesel engine service repair manualfjjsekkfksmem
This document provides service information for the 3JH2 series marine diesel engines, including specifications, component diagrams, maintenance procedures, and troubleshooting guides. It has been revised twice to include additional engine models and technical updates. The manual covers general technical details, disassembly and reassembly processes, fuel injection systems, cooling systems, gearboxes, electrical systems, and other relevant topics for servicing these engines.
Toyota 7 bpue15 high level orderpicker service repair manualfjskksmem
This document is a service manual for the Toyota Orderpicker Model 7BPUE15 for serial numbers 80,001 and up. It contains sections on safety, systems overview, planned maintenance, troubleshooting, codes and tests, and procedures for various components. The manual provides information to service technicians on maintaining and repairing the orderpicker.
Toyota 6 hbw20 4000lb powered pallet walkie service repair manualfujsjefksekmm
This document is a service manual that provides instructions on how to use and navigate the manual. It begins with an overview of the manual's design, which includes a two-line header on each page indicating the manual name, chapter, and topic. It describes the table of contents and how the manual is organized into chapters covering safety, systems overview, planned maintenance, troubleshooting, and component procedures. The document provides guidance on finding specific information within each chapter using headings, charts, and the index.
Toyota 6 hbw20 4000lb powered pallet walkie service repair manualfhsejkdkmem
This document is a service manual that provides instructions on how to use and navigate the manual. It begins with an overview of the manual's design and formatting. It then provides a table of contents that lists and structures the chapters and their contents. The final section explains how to use the START page to guide the user to the proper section for troubleshooting or component procedures. The summary outlines the key sections and navigation features of the service manual.
Daewoo doosan solar 420 lc v excavator operator and maintenance manualsoeldksejdksem
This document is an operation and maintenance manual for a Daewoo Solar 420LC-V excavator from 2001. It provides safety information and instructions for operating, maintaining, transporting, and storing the excavator. The manual includes sections on safety labels, lifting capacities, starting and operating the excavator, performing regular maintenance, and troubleshooting issues. Owners are advised to follow the safety precautions and maintenance schedules outlined in the manual.
Cummins onan dfha generator service repair manualjfksemdmmeazx
This document provides instructions and specifications for generator sets and their PowerCommand 3100 series controllers. It contains sections on introduction and overview, control operation, circuit boards and modules, troubleshooting, service and calibration, servicing the generator, day tank fuel transfer pumps, initial startup procedures, and an on-site power system application review for diesel generator systems running at 600VAC or lower. The document is an extensive technical manual for servicing and maintaining these generator sets and controllers.
New holland td60 d tractor service repair manualufusjejfjksekmm
This document is the service manual for TD60D-TD95D model tractors. It contains sections on general information, the engine, clutch, gearbox, transmission of motion, front and rear mechanical transmissions, power take-off, brakes, hydraulic systems, steering, axle and wheels, auxiliary equipment, electrical system, and cab. Each section provides specifications, removal and installation instructions, overhaul procedures, and troubleshooting information for the corresponding systems.
Toyota 7 bpue15 high level orderpicker service repair manualudfjjsjekdkdmm
This document is a service manual for the Toyota Orderpicker Model 7BPUE15 for serial numbers 80,001 and up. It contains sections on safety, systems overview, planned maintenance, troubleshooting, codes and tests, and component level procedures. The manual provides information and instructions for technicians to service and repair the orderpicker.
New holland tn95 fa tractor service repair manualufjjdkksmeme
This document is a service manual for TN75FA-TN85FA-TN95FA tractors. It contains sections on general guidelines, the engine, clutch, transmissions, and other systems. Each section provides specifications, diagrams, removal and installation instructions, and procedures for inspection and repair. The manual is intended exclusively for use by trained service technicians.
Crown lp3010 lift truck service repair manualfjskekdmmem
The document provides maintenance information for LP3010/3020 series trucks. It includes:
1) An overview of revisions made to the manual and specific pages.
2) Tables of contents listing maintenance and repair topics such as lubrication, hydraulics, drive unit, and electrical components.
3) Sections covering maintenance schedules, safety procedures, component access, lubrication points, hydraulic system repairs, and electrical component operation.
Perkins phaser 135 ti model al (euro 2) diesel engine service repair manualfjjsekkksmeik
This document provides a workshop manual for the Perkins Phaser 135 Ti 4 cylinder diesel engine. It contains specifications, instructions for disassembly and assembly of engine components, timing procedures, and safety information. The manual is divided into chapters covering the cylinder head, pistons and connecting rods, crankshaft, timing components, cylinder block, and other systems such as fuel, cooling, and aspiration.
Cummins onan dfhb generator service repair manualfksefkskemm
This document provides an overview and instructions for generator sets with PowerCommand 3100 controllers. It describes the system components, control operation including the control menu displays, troubleshooting procedures, service and calibration of the control and components. It also includes sections on initial system startup and testing procedures.
Cummins onan dfhd generator service repair manualfjsexswkfkmsem
This document provides an overview and instructions for generator sets with PowerCommand 3100 controllers. It describes the system components, control operation including the control menu displays, troubleshooting procedures, service and calibration of the control and components. It also includes sections on initial system startup and testing procedures.
ASV ST-50 Scout Tracked Utility Vehicle Service Repair Manual.pdffjdkksmemd
This document is a service manual for the ST-50 Rubber Track Utility Vehicle. It contains sections covering safety, technical specifications, circuit diagrams, maintenance, controls and instrumentation, component removal and installation procedures, troubleshooting, and more. The manual provides information and instructions for technicians to service and repair the vehicle.
ASV SC-50 Scout Tracked Utility Vehicle Service Repair Manual.pdffjdkksmemd
This document is a service manual for the SC-50 Rubber Track Utility Vehicle. It contains sections covering: safety overview; technical specifications; circuit diagrams; maintenance procedures like changing fluids and filters; controls and instrumentation; removing and installing components like tracks, pumps, and valves; troubleshooting; and specifications for replacement parts. The manual provides information and instructions for technicians to service and repair the vehicle.
Daewoo Doosan 330-III Excavator Service Repair Manual.pdfufjkskdmdmd
This document provides operation and maintenance instructions for a Daewoo excavator. It covers safety procedures, equipment specifications, maintenance and repair of various components. The document includes sections on safety practices for operation and lifting loads, maintenance procedures for hydraulic cylinders, pumps and other components, and specifications for the engine, hydraulic system, dimensions and lift capacity.
Toyota 8TB50 Pallet Truck Service Repair Manualuhjekm ioelpoe
This is the Highly Detailed factory service repair manual for theTOYOTA 8TB50 PALLET TRUCK, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.TOYOTA 8TB50 PALLET TRUCK Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
General Information
Safety
Systems Overview
Planned Maintenance
Troubleshooting
Messages and Codes
Component Procedures
Theory of Operation
Appendix
Index
Wire Diagrams
Parts Catalog
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveTOYOTA 8TB50 PALLET TRUCK Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
Yanmar 3 jh25a marine diesel engine service repair manualfjsekksmem
This document provides service information for the 3JH2 series marine diesel engines, including specifications, component diagrams, maintenance procedures, and troubleshooting guides. It has been revised twice to include additional engine models and technical updates. The manual covers general technical details, disassembly and repair of major engine systems, testing procedures, and part replacement torque specifications.
Yanmar 3 jh2 (b)e marine diesel engine service repair manualfjksekkmsemm
This document provides service information for the 3JH2 series marine diesel engines, including specifications, component diagrams, maintenance procedures, and troubleshooting guides. It has been revised twice to include additional engine models and technical updates. The manual covers general technical details, disassembly and reassembly processes, fuel injection systems, cooling systems, gearboxes, electrical systems, and other relevant topics for servicing these engines.
Yanmar 3 jh2 (b)e marine diesel engine service repair manualfjsekfsmeme
This document provides service information for the 3JH2 series marine diesel engines, including specifications, component diagrams, maintenance procedures, and troubleshooting guides. It has been revised twice to include additional engine models and technical updates. The manual covers general technical details, disassembly and repair of major engine systems, testing procedures, and part replacement torque specifications.
Yanmar 3 jh25a marine diesel engine service repair manualfjjsekkfksmem
This document provides service information for the 3JH2 series marine diesel engines, including specifications, component diagrams, maintenance procedures, and troubleshooting guides. It has been revised twice to include additional engine models and technical updates. The manual covers general technical details, disassembly and repair of major engine systems, fuel injection, cooling, gearboxes, electrical systems, and testing procedures.
Yanmar 3 jh30a marine diesel engine service repair manualfjskekfmsmem
This document provides service information for the 3JH2 series marine diesel engines, including specifications, component diagrams, maintenance procedures, and troubleshooting guides. It has been revised twice to include additional engine models and technical updates. The manual covers general technical details, disassembly and reassembly processes, fuel injection systems, cooling systems, gearboxes, electrical systems, and other relevant topics for servicing these engines.
Yanmar 3 jh2 t(b)e marine diesel engine service repair manualfjjsekkfksmem
This document provides service information for the 3JH2 series marine diesel engines, including specifications, component diagrams, maintenance procedures, and troubleshooting guides. It has been revised twice to include additional engine models and technical updates. The manual covers general technical details, disassembly and reassembly processes, fuel injection systems, cooling systems, gearboxes, electrical systems, and other relevant topics for servicing these engines.
Toyota 7 bpue15 high level orderpicker service repair manualfjskksmem
This document is a service manual for the Toyota Orderpicker Model 7BPUE15 for serial numbers 80,001 and up. It contains sections on safety, systems overview, planned maintenance, troubleshooting, codes and tests, and procedures for various components. The manual provides information to service technicians on maintaining and repairing the orderpicker.
Toyota 6 hbw20 4000lb powered pallet walkie service repair manualfujsjefksekmm
This document is a service manual that provides instructions on how to use and navigate the manual. It begins with an overview of the manual's design, which includes a two-line header on each page indicating the manual name, chapter, and topic. It describes the table of contents and how the manual is organized into chapters covering safety, systems overview, planned maintenance, troubleshooting, and component procedures. The document provides guidance on finding specific information within each chapter using headings, charts, and the index.
Toyota 6 hbw20 4000lb powered pallet walkie service repair manualfhsejkdkmem
This document is a service manual that provides instructions on how to use and navigate the manual. It begins with an overview of the manual's design and formatting. It then provides a table of contents that lists and structures the chapters and their contents. The final section explains how to use the START page to guide the user to the proper section for troubleshooting or component procedures. The summary outlines the key sections and navigation features of the service manual.
Toyota 6 hbw20 4000lb powered pallet walkie service repair manualudfjjsjekdkdmm
This document is a service manual that provides instructions on how to use and navigate the manual, which is designed to help technicians efficiently service a Toyota powered pallet walkie. The manual includes chapters covering safety, systems overview, planned maintenance, troubleshooting, and procedures for servicing individual components. It explains that the manual uses a running page header, table of contents, and start page to guide users to the appropriate content. Component procedures are organized based on frequency of attention and physical or functional relationships between parts.
Toyota 6 hbw20 4000lb powered pallet walkie service repair manualfjskksmem
This document is a service manual for the Toyota Powered Pallet Walkie. It provides instructions on how to use the manual, which is designed to help technicians of varying experience levels efficiently service the equipment. The manual contains sections on safety, systems overview, planned maintenance, troubleshooting, and procedures for servicing individual components. It aims to guide users to the appropriate information through its organization, contents pages, and indexing system.
Toyota 7 bpue15 high level orderpicker service repair manualfhsejkdkmem
This document is a service manual for the Toyota Orderpicker Model 7BPUE15 for serial numbers 80,001 and up. It contains sections on safety, systems overview, planned maintenance, troubleshooting, codes and tests, and component level procedures. The manual provides information and instructions for technicians to service and repair the orderpicker.
Toyota 7 bpue15 high level orderpicker service repair manualfujsjefksekmm
This document is a service manual for the Toyota Orderpicker Model 7BPUE15 for serial numbers 80,001 and up. It contains sections on safety, systems overview, planned maintenance, troubleshooting, codes and tests, and component level procedures. The manual provides information and instructions for technicians to service and repair the orderpicker.
This document is a service manual that provides information for servicing and maintaining models TL642 and TL943. It contains sections covering safety practices, general specifications, maintenance schedules, the boom system, operator cab, axles/wheels, transmission, and engine. The manual provides component terminology, removal and installation instructions for parts, specifications, and troubleshooting information.
This document is a service manual that provides information for servicing and maintaining models TL642 and TL943. It contains sections covering safety practices, general specifications, maintenance schedules, the boom system, operator cab, axles/wheels, transmission, and engine. The manual provides component terminology, removal and installation instructions for parts, specifications, and troubleshooting information.
This document is a service manual that provides information for servicing and maintaining models TL642 and TL943. It contains sections covering safety practices, general specifications, maintenance schedules, the boom system, operator cab, axles/wheels, transmission, and engine. The manual provides component terminology, removal and installation instructions for parts, specifications, and troubleshooting information.
Similar to Asv posi track pt-70 track loader service repair manual (20)
Caterpillar cat 936 f wheel loader (prefix 9mk) service repair manual (9mk000...fujskekfmsme
This document provides instructions for disassembling and assembling axle shaft assemblies for a 936F wheel loader. It describes removing the front and rear axle housing groups, and then removing individual components of the axle shaft assemblies including the axle shaft, planetary carrier assembly, retaining rings, seals, and bearings. Detailed steps are provided for disassembling the planetary carrier assembly. The document also includes instructions for assembling the components, including pressing in the ring gear and installing seals, bearings, and the adjusting nut. Tolerances and specifications are provided for installing components and adjusting the bearing nut torque.
Caterpillar cat 933 c lgp hystat track loader (prefix 4ms) service repair man...fujskekfmsme
This document provides instructions for removing and installing inlet and exhaust valve springs and guides on a Caterpillar 3046 engine. It describes the necessary tools and gives step-by-step procedures for removing valve springs and guides from the cylinder head without removing the head, and for installing new springs and guides. Safety notices are included to keep parts clean and contain fluids.
Caterpillar cat 933 c hystat track loader (prefix 4ms) service repair manual ...fujskekfmsme
The document provides instructions for installing and removing an air inlet manifold and valves on a Caterpillar 3046 engine. It describes:
1) Using various tools to compress valve springs and remove caps and keepers to access the valves and springs.
2) Checking valve springs with a spring tester and specifications.
3) Installing new gaskets and bolting the air inlet manifold, elbow, and other components in multiple steps while checking for damage.
4) Maintaining air pressure in cylinders during valve spring removal and installation to hold valves in position.
Caterpillar cat 931 b track loader (prefix 29y) service repair manual (29y000...fujskekfmsme
This document provides instructions for servicing the tracks and track rollers of a Caterpillar 931B track loader. It describes how to remove and install track rollers, disassemble and assemble track rollers, separate and reconnect tracks, and remove and install front idlers. The procedures include removing guards and covers, loosening the tracks, lifting the machine, and removing and installing components using various tools while following warnings about hydraulic pressure and pin removal. Torques and clearances are specified.
Caterpillar cat 930 t wheel loader (prefix 57z) service repair manual (57z040...fujskekfmsme
This document provides instructions for installing the fuel injection pump housing and governor on a Caterpillar 930T wheel loader. It describes:
1) Using an engine turning tool to find the top center position of the No. 1 piston by turning the flywheel and installing a bolt.
2) Installing fuel pump timing pins and turning the flywheel to align the marks for installation.
3) Installing the fuel injection pump housing and governor, checking clearance and installing covers.
The summary highlights the key steps of finding top center position, installing with timing pins, and final installation checks.
Caterpillar cat 930 r wheel loader (prefix 57z) service repair manual (57z040...fujskekfmsme
This document provides instructions for installing the fuel injection pump housing and governor on a Caterpillar 930T wheel loader. It describes:
1) Using an engine turning tool to find the top center position of the No. 1 piston by turning the flywheel and installing a bolt in a hole in the flywheel.
2) Installing fuel pump timing pins and checking that the fuel injection pump gear teeth are aligned with the timing marks on the housing.
3) Installing the fuel injection pump housing and governor, and checking that the governor shaft turns freely once assembled.
Caterpillar cat 930 r wheel loader (prefix 57z) service repair manual (57z030...fujskekfmsme
The document provides instructions for removing and installing the crankshaft front seal on a 930R wheel loader with a 3304 engine. It describes using various tools to remove the old seal and wear sleeve, cleaning the crankshaft, and pressing on a new seal and wear sleeve using an installer tool. The instructions note to keep parts clean and not use lubricants when installing the new seal components.
Caterpillar cat 930 r wheel loader (prefix 57z) service repair manual (57z000...fujskekfmsme
This document provides instructions for assembling a fuel injection pump housing and installing the fuel injection pump and governor on an engine. The key steps include:
1. Assembling the fuel injection pump housing by pressing bearings into place and installing other internal components.
2. Setting the engine's #1 piston to top center to align the fuel injection pump timing.
3. Installing the fuel injection pump housing, governor, and ensuring the timing pin engages the camshaft notch for proper timing.
Caterpillar cat 390 f mobile hydraulic excavator (prefix b37) service repair ...fujskekfmsme
This document provides instructions for disassembling and assembling the travel motor of a 390F Hydraulic Excavator. The disassembly procedure involves 40 steps to remove components like the head, relief valves, spools, pistons, barrel assembly, swashplate, shaft and bearings. The assembly procedure instructs to clean parts, apply oil, and install components like the lip seal, bearing, retaining ring, and shaft in the reverse order of disassembly. Proper tooling and safety precautions are noted throughout.
Caterpillar cat 390 f l excavator (prefix tye) service repair manual (tye0000...fujskekfmsme
This document provides instructions for disassembling and assembling the travel motor of a 390F L Excavator. It lists 40 steps for disassembly, including removing covers, pistons, springs, seals and other components. It then lists 12 steps for reassembly, starting with installing a lip seal and finishing by reinstalling covers. Precautions are provided regarding cleaning parts and applying oil before assembly.
Caterpillar cat 390 f l excavator (prefix mgf) service repair manual (mgf0000...fujskekfmsme
The document provides instructions for disassembling and assembling the travel motor of a 390F L Excavator. It lists 40 steps for disassembly, including removing components like the head, relief valves, springs, seals, piston, and bearings. It then lists 17 steps for assembly, installing these components in reverse order and noting that cleanliness and applying oil to parts is important. Tools required are also listed.
Caterpillar cat 390 f l excavator (prefix hjd) service repair manual (hjd0000...fujskekfmsme
The document provides disassembly instructions for a 390F L excavator travel motor in 40 steps. It details removing components such as the motor head, relief valves, pistons, springs, seals, plates, and bearings. Tools required include link brackets, a slide hammer puller, threaded rods, pliers, and a driver group. Safety notices are provided to contain fluids and brace against spring forces during disassembly.
Caterpillar cat 390 f l excavator (prefix gay) service repair manual (gay0000...fujskekfmsme
This document provides instructions to disassemble a travel motor on a 390F L excavator. It lists 40 steps to completely disassemble the travel motor, removing components like the head, relief valves, pistons, springs, seals, plates, and bearings. Detailed illustrations accompany each step to show how to position the component for removal and what tools are required. Safety notices are included to warn of potential hazards like stored energy in springs.
Caterpillar cat 390 d l excavator (prefix wag) service repair manual (wag0000...fujskekfmsme
This document provides instructions for disassembling and assembling the final drive of a 390D L excavator. It lists the required tools and parts. The disassembly process involves removing over 30 components of the final drive including housing covers, gears, shafts, and seals. Photographs illustrate each step. Precautions are outlined to prevent dirt contamination. The assembly section lists a similar process and notes to inspect parts and apply sealant lubricants.
Caterpillar cat 390 d excavator (prefix kcz) service repair manual (kcz00001 ...fujskekfmsme
This document provides instructions for disassembling and assembling the final drive of a 390D Excavator. It lists over 30 detailed steps for removing components like the housing cover, carrier assemblies, planetary gear assemblies, ring gear, and seals. Precision tools are required and cleanliness is critical to prevent damage to components. The document emphasizes keeping parts protected and surfaces clean during assembly to ensure proper operation of the final drive.
Caterpillar cat 390 d excavator (prefix byp) service repair manual (byp00001 ...fujskekfmsme
This document provides disassembly and assembly instructions for the travel motor on a 390D Excavator. It details 40 steps to disassemble the travel motor by removing components like the head, relief valves, pistons, springs, seals, plates, and bearings. It then lists 13 steps for reassembling the travel motor, applying oil to components and ensuring cleanliness during assembly.
Caterpillar cat 385 c l mobile hydraulic excavator (prefix m3w) service repai...fujskekfmsme
This document provides instructions for disassembling and assembling the final drive of a 385C L Mobile Hydraulic Excavator. It lists over 30 steps for disassembly, removing components like the housing cover, carrier assemblies, planetary gears, and seals. It also lists tools needed and provides illustrations. The assembly section lists a similar number of steps to reinstall components in reverse order and notes the importance of cleanliness.
Caterpillar cat 385 c l mh excavator (prefix waw) service repair manual (waw0...fujskekfmsme
This document provides instructions for removing and installing fuel system components on a 385C Material Handler excavator powered by a C-18 engine, including:
- Removing and installing the fuel priming pump
- Removing and installing the fuel filter base
- Removing and installing the fuel transfer pump
- Removing the electronic unit injectors
The instructions include safety notices and illustrations showing the component locations and part names.
Yamaha outboard f60 ceht service repair manual sn1000001fujskekfmsme
This document provides a service manual for outboard motor models F50F, FT50G, F60C, and FT60D. It contains general information about how to use the manual, identification of applicable models and features, predelivery checks, and troubleshooting guides. The manual is organized into sections covering general information, specifications, periodic checks and adjustments, fuel system, power unit, lower unit, bracket unit, electrical systems, and troubleshooting. It also includes exploded diagrams of components and lists parts with quantities and specifications.
Yale (e877) gdp160 ec lift truck service repair manualfujskekfmsme
The document provides instructions for servicing components of an operator's cab, including:
1. The cab structure is a welded frame with an integrated overhead guard. Cabs can be open or closed.
2. Cabs with a tilt system can be tilted using a hydraulic cylinder and hand pump or optional electric pump.
3. The cab tilt system uses hydraulic pressure to unlock latches and extend/retract the cylinder to raise and lower the cab.
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
5. Chapter Overview
This chapter contains product safety information for the
PT-70/80 Rubber Track Loaders. Read and understand
all product safety information before attempting to
service any Rubber Track Loader.
Safety Messages
Safety messages are included in this document to
serve as warnings of potentially dangerous conditions.
Failure to follow their instructions could result in injury
or death.
These messages are identified by the headings:
!DANGER!….!WARNING!….!CAUTION!.
The messages are to be understood as:
Attention! Your Safety Is Involved!
The information that follows each heading describes
the potential hazard and the precautions necessary to
protect yourself and others from injury. Instructions
may be written or pictorially presented.
This symbol is used to alert service personnel of an
imminently hazardous situation that will result in serious
injury or death.
This symbol is used to alert service personnel of a
potentially hazardous situation that could result in seri-
ous injury or death.
This symbol is used to alert service personnel of an
unsafe practice that could result in injury.
Information Messages
Information messages are also included in this docu-
ment to supplement the instructions and photographs
in each chapter. These messages are identified by the
labels NOTICE or Note.
NOTICE
This label is used to alert service personnel of a situation
that could lead to equipment or machine damage.
Note: This label is used to provide important additional infor-
mation, further explanation, comments or to stress the impor-
tance of a topic.
The person(s) in charge of servicing a Rubber Track
Loader may be unfamiliar with many of the systems on
the machine. This makes it especially important to use
caution when performing service tasks. Familiarize
yourself with the affected system(s) and components
before attempting any type of maintenance or service.
It is not possible to anticipate every potential haz-
ard. The safety messages included in this docu-
ment and displayed on the machine are not all-
inclusive. They are intended to make you aware of
potential risks and encourage a safe approach to
performing service work. If you use a tool, proce-
dure, work method or operating technique that is
not specifically recommended by ASV, you must
satisfy yourself that it is safe for you and others.
You must also ensure that the machine will not be
damaged or be made unsafe by the operation,
lubrication, maintenance or repair procedures that
you choose.
Basic Precautions
Improper or incomplete maintenance/repair of a Rubber
Track Loader can be dangerous and may result in
machine damage, injury or even death.
Do not attempt to perform any type of repair or mainte-
nance on a Rubber Track Loader until you have read and
fully understood the information in this manual.
Refer to the Operation and Maintenance manual for
instructions regarding proper machine operation tech-
niques before operating any Rubber Track Loader.
Following is a list of basic precautions that should
always be observed.
Safety Labels
Safety labels are displayed in various places through-
out the machine to serve as warnings of potentially
dangerous conditions. Read and understand all
"Safety" labels on any Rubber Track Loader before
attempting to operate, maintain or repair it. Replace
any damaged, illegible or missing labels as necessary.
1. Product Safety
1-1
!WARNING!
!CAUTION!
!WARNING!
!DANGER!
6. Protective Equipment
Always wear appropriate protective equipment for
working conditions when working on or around a
Rubber Track Loader. Wear hard hats, protective
glasses, safety shoes and any other equipment nec-
essary to ensure your safety and the safety of others
as you work. In particular, wear protective glasses
when pounding on any part of the machine or its
attachment with a hammer or sledge. Do not wear
loose clothing or jewelry that can catch on components
and cause injury. If welding is required, use welding
gloves, helmet (UV eye protection), apron, boots and
any other protective clothing necessary to ensure your
safety and the safety of others while welding. Avoid
wearing flammable or heat sensitive clothing while per-
forming tasks that involve welding.
Entering and Exiting
Always use steps and handholds when entering or
exiting a Rubber Track Loader. Clean any mud or
debris from steps or work platforms before using them.
Always face the machine when using steps and hand-
holds. When it is not possible to use the designed
entry/exit system, utilize ladders, scaffolds, or work
platforms to safely gain access to the machine.
Lifting
Use a hoist when lifting components that weigh 23 kg
(50 Ib) or more, to avoid back injury. Make sure all
chains, hooks, slings, etc., are in good condition and
are of the correct capacity. Be sure hooks are posi-
tioned correctly and equipped with a spring latch.
Lifting eyes are not to be side loaded during a lifting
operation.
Hot Fluids and Components
Stay clear of hot components and system fluids of the
engine, exhaust, radiator/oil cooler and hydraulic
lines/tubes. Also, use caution when removing fill caps,
breathers and plugs on the machine. Hold a rag over
the cap or plug to prevent being sprayed or splashed
by liquids under pressure. Be especially careful if the
machine has been operated recently, fluids may still be
hot. To ensure your safety, allow the machine to cool
before attempting any service procedure that involves
hot fluids or components.
Corrosion Inhibitor
Corrosion inhibitor contains alkali. Avoid contact with
eyes. Avoid prolonged or repeated contact with skin.
Do not take internally. In case of contact, wash skin
immediately with soap and water. For eyes, flush with
large amounts of water for at least 15 minutes. Call
Physician. Keep out of reach of children.
Batteries
Do not smoke when inspecting the battery electrolyte
level. Never disconnect any charging unit circuit or bat-
tery circuit cable from the battery when the charging
unit is operating. A spark can cause an explosion from
the flammable vapor mixture of hydrogen and oxygen
that is released from the electrolyte through the battery
outlets. Do not let electrolyte solution make contact
with skin or eyes. Electrolyte solution is an acid. In
case of contact, immediately wash skin with soap and
water. For eyes, flush with large amounts of water for
at least 15 minutes. Call Physician. Keep out of reach
of children.
Pressurized Items
1. Do not use hands or any other body part to check
for fluid leaks in the hydraulic system. Always use
a solid material like wood or metal to check for this
type of leak. Leaking fluid under pressure can pen-
etrate body tissue. Fluid penetration can cause
serious injury and even death. If fluid is injected
into your skin, get treatment immediately. Seek
treatment from a doctor that is familiar with this
type of injury.
2. Relieve pressure from the hydraulic system before
disconnecting or removing any lines, fittings or
related items. Do this by relaxing all hydraulic
actuators. If the lift arms are raised, make sure
they are securely braced. Be alert for possible
pressure release when disconnecting any device
from a pressurized system.
3. Lower the lift arms before performing any work on
the machine. If this cannot be done, make sure
they are securely braced to prevent them from
dropping unexpectedly during service.
4. Loose or damaged fuel, oil, hydraulic, lines, tubes
and hoses can cause fires. Do not bend or strike
high pressure lines or install ones that have been
bent or damaged. Check lines, tubes and hoses
carefully. See item 1 for precautions on checking
for fluid leaks.
5. Pressurized air or water can also cause injury.
When pressurized air or water is used for clean-
ing, wear a protective face shield, protective cloth-
ing, and protective shoes. The recommended max-
imum air pressure for cleaning purposes is 205
kPa (30 psi). When using a pressure washer, keep
in mind that nozzle pressures are typically very
high. Generally, pressures are well above 13790
kPa (2000 psi). Follow all recommended practices
provided by the pressure washer manufacturer.
1-2
Rubber Track Loader
1. Product Safety
7. Repair
Accidental machine starting can cause injury or even
death to personnel working on a Rubber Track Loader.
As a precaution, disconnect the battery cables from the
battery terminals, tape the battery clamps and remove
the key from the ignition switch prior to performing any
service work on a Rubber Track Loader.
Place a “Do Not Operate” tag prominently on the
machine to inform personnel that the machine is being
serviced.
1. Disconnect the battery and discharge any capaci-
tor before beginning work on a machine. Attach a
Do Not Operate tag in the cab to alert any opera-
tor that service is in progress.
2. If possible, make all repairs with the machine
parked on a level, hard surface. Use blocks to pre-
vent the machine from rolling while working on or
under the machine.
3. Do not work on or under any machine that is sup-
ported only by a hydraulic jack or hoist. Always
use some sort of mechanical support to ensure
that the machine will not fall. ASV jack stands work
well to support the machine while performing
maintenance or repair work.
4. Make sure the work area around the machine is
safe and make yourself aware of any hazardous
conditions that may exist. If the engine needs to
be started inside an enclosure, make sure that the
engine’s exhaust is properly vented.
5. Be sure all protective devices including guards and
shields are properly installed and functioning cor-
rectly before beginning any service task. If a guard
or shield must be removed to perform the repair
work, use extra caution.
6. Always use the appropriate tools for the work to be
performed. Tools should be in good condition and
you should understand how to use them properly
before performing any service work.
7. When replacing fasteners, use parts of equivalent
grade and size. Do not use a lesser quality fasten-
er if replacements are necessary.
8. Be prepared to stop an engine if it has been re-
cently overhauled or the fuel system has been
recently serviced. If the engine has not been
assembled correctly, or if the fuel settings are not
correct, the engine can possibly overspeed and
cause bodily injury, death or property damage. Be
prepared to shut off the fuel and air supply to the
engine in order to stop the engine.
9. Be careful when removing cover plates. Gradually
back off the last two bolts or nuts located on oppo-
site sides of the cover. Then, pry the cover loose
to relieve any spring or other pressure before
removing the last two nuts or bolts completely.
10. Repairs requiring welding should be performed
only by personnel adequately trained and knowl-
edgeable in welding procedures and with the guid-
ance of appropriate reference information.
Determine the type of metal being welded and
select the correct welding procedure and filler
material to provide a weld that is as strong or
stronger than the original weld.
11. Take precautions to avoid damaging wiring during
removal and installation operations. Carefully route
wires so that they will not contact sharp corners,
objects or hot surfaces during operation.
12. When performing service that requires the lift arms
to be in the raised position, always utilize the lift
arm brace located on the rear of the loader tower.
13. Relieve hydraulic system pressure by relaxing all
hydraulic actuators prior to attempting any
hydraulic maintenance or repair.
14. Always tighten connections to the correct torque
specification. Make sure that all shields, clamps
and guards are installed correctly to avoid exces-
sive heat, vibration or unwanted contact between
parts during operation. Shields that protect
exhaust components from oil spray in event of a
line, tube or seal failure must be correctly installed.
15. Do not operate a machine if any rotating part is
damaged or contacts other parts during operation.
Any high speed rotating component that has been
damaged or altered should be checked for balance
before reusing. Make sure all protective devices,
including guards and shields, are properly installed
and functioning correctly before starting the engine
or operating the machine.
Attachments
Only use attachments that are recommended by ASV.
Make sure that all necessary guards and protective
equipment are in place and functioning prior to operat-
ing any attachment.
1-3
Rubber Track Loader
1. Product Safety
!WARNING!
8. Wear protective glasses and protective equipment as
required by conditions or as recommended in the
attachment’s operation manual.
Ensure that all personnel are far enough away from
the work area so they will not be struck by flying ob-
jects.
Stay clear of the cutting edges, pinching surfaces or
crushing surfaces of the attachment while performing
any attachment maintenance, testing or adjustments.
Asbestos Information
Equipment and replacement parts shipped from the
manufacturer are asbestos free. When replacement
parts are required, use only genuine manufacturer’s
replacement parts
Use caution when handling replacement parts from
another supplier if these parts contain asbestos. Avoid
inhaling dust that might be generated when handling
these components or when handling asbestos debris.
Inhaling this dust can be hazardous to your health.
The components that may contain asbestos fibers are
lining material, and some gaskets. The asbestos that is
used in these components is usually encased in a
resin or sealed in some way. Normal handling is not
hazardous unless airborne dust containing asbestos is
generated.
If dust that may contain asbestos is present, there are
several guidelines that should be followed.
1. Never use compressed air for cleaning. Avoid
brushing or grinding materials that contain as-
bestos. Use a wet method to clean up asbestos
debris. A vacuum that is equipped with the high-
efficiency particulate air filter (HEPA filter) can also
be used.
2. Use exhaust ventilation on permanent machining
jobs.
3. Wear an approved respirator if there is no other
way to control the dust.
4. Comply with applicable rules and regulations for
the work place. In the USA, use Occupational
Safety and Health Administration requirements.
These OSHA requirements can be found in 29
CFR 1910.1001.
5. Obey environmental regulations for disposal of
asbestos.
6. Stay away from areas that might have asbestos
particles in the air.
When replacement parts are required for your machine,
use only genuine ASV replacement parts or parts that
meet or exceed original specifications including, but not
limited to physical dimensions, type, strength and mate-
rial.
Installing lesser components can lead to premature fail-
ures, product damage, personal injury or death.
Machine Labels and Decals
Labels and decals placed on the machine provide
safety information and operating instructions.
Familiarize yourself with the location and significance
of these labels to ensure your safety.
Product Identification Number
The Product Identification Number (PIN) is located on
the front of the cab enclosure in the lower right corner.
(figure 1-1). Always provide the PIN when contacting
the dealer about parts, service, warranty or acces-
sories. No warranty claims will be processed unless
the PIN is provided.
Engine Serial Number
The engine serial number is located on the top of the
engine valve cover near the rear of the machine.
(figure 1-2)
1-4
Rubber Track Loader
1. Product Safety
!WARNING!
1-1
1-2
Model ID Tag
Serial # Tag
9. Machine Label and Decal Examples
Examples of the labels and decals displayed on the
machine are shown on this page.
1-5
Rubber Track Loader
1. Product Safety
Keep out from under raised lift arms!
Do not go beneath raised lift arms unless the lift arm
brace has been properly installed. See operation and
maintenance manual for installation procedure.
Failure to observe or comply with warnings may result in
serious injury or even death.
DANGER
2045-466
WARNING
Entering & Exiting
Maintain 3-point contact
with step and hand rails.
Engine Warm-Up
Allow the engine to
warm up prior to opera-
tion.
Carrying Loads
Carry loads low. Load,
unload and turn on level
ground.
Inclines
Travel with heaviest end
of machine facing uphill.
Riders
Riders not permitted.
Work Platform
Never use a work tool as
a work platform.
Disclaimer
Failure to observe and
comply with the warn-
ings listed above may
result in machine dam-
age, personal injury, or
even death.
Pre-Start Checklist
1. Operator seated in
cab.
2. Seat belt fastened.
3. Lap bar pivoted down.
4. Joystick controls in
neutral position.
5. Quick attach switch in
locked position.
6. High & low flow auxil-
iary switches off.
2045-469
WARNING
Brushcutting
Brushcutting, mowing or
operations that generate
airborne debris can
cause fires.
With the engine off
and cool:
1. Inspect the engine
compartment and any
other areas containing
hot or rotating parts
2. Thoroughly clean
these areas as often
as necessary to
avoid combustion.
Failure to do so could
result in fire that may
cause machine damage,
personal injury, or even
death.
2-Speed
(if equipped)
To engage:
Press the button located
on the front of the right
joystick control.
To disengage:
Press the button a sec-
ond time.
2045-468
DANGER
Operating Position
Never operate the
machine with any part of
your body protruding
out of the operator
enclosure.
Failure to do so may
result in serious injury or
even death.
Prior to Operating
Read and fully under-
stand the operation and
maintenance manual
prior to operating this
machine.
2045-472
WARNING Keep away from tracks while machine is in motion.
Serious personal injury or even death may result.
Inspect undercarriages daily for accumulation of
debris. Build-up of debris may shorten component
life and decrease machine performance.CAUTION 2045-467
Follow instructions closely!
Failure to install lift arm brace correctly
may result in personal injury or death.
WARNING
NEVER GO BENEATH UNSECURED LIFT ARMS
1. Remove any attachment from the machine.
2. Have an assistant remove the lift arm brace from its stowed position.
3. Start the engine and carefully raise the lift arms.
4. Have the assistant install the brace around the exposed portion of the lift cylinder rod.
5. Have the assistant secure the brace to the rod with the retaining pins, then stand clear.
6. Slowly lower the lift arms until they come to rest on the brace.
7. Shut the engine off and carefully exit the machine.
8. Reverse this procedure to lower and re-secure the lift arm brace. 2045-646
10. PT-80 Specifications
Engine
- Model: Perkins 804C-33T
- Displacement: 3.3 liter
- Gross horsepower: 80.5 hp (60 kW)
- Torque: 186 lb-ft. (253 Nm)
- Idle rpm: 1000 (low idle), 2600 (high idle)
- Average water /thermostat temperature: 190°F,
87.8°C
Transmission
- Model: Cat A22VG45 tandem (Rexroth)
Drive Pumps
- Displacement: 2.7459 in3/rev (45 cc/rev)
- Relief pressure: 5500 psi (380 bar)
- Flow: 30.91 gpm (117 lpm) @ 2600 rpm (per
pump)
Charge Pump
- Displacement: 1.373 in3/rev (22.5 cc/rev)
- Relief pressure: 475 +/- 30 psi (32.75 bar)
- Flow: 15.4 gpm (58.3 lpm) @2600 rpm
Drive Motors
- Model: Rexroth MCR 5
- Displacement: 50 in3/rev (820 cc/rev)
Pilot Controls (Joysticks)
- Model: Rexroth 08-351
Auxiliary Pump
- Make: Rexroth
- Type: Axial Piston, Variable Load Sense
- Displacement: 2.75 in3/rev (45 cc/rev)
- Max Flow: 30 gpm (113.6 lpm) @ 2600 rpm
- Relief pressure: 3000 psi (20,680 kPa)
- Marginal (Standby) Pressure: 218 psi (1,503 kPa)
- Cooling/filtering: Oil is filtered and cooled at all
times. In auxiliary mode, the oil is filtered after the
attachment to protect the machine if the attach-
ment motor fails or contaminants are introduced
from the quick couplers.
Lift Arm Control Valve
- Make: Rexroth
- Type: Load Sense
Oil Cooler
- Operating pressure: 150 psi (1034 kPa)
- Bypass relief pressure: 80 psi (689 kPa)
- Hot oil sending unit: 225°F (107.2°C)
- Avg. oil operating temp. 50-60°F above ambient.
(High flow application 80°F above ambient.)
Critical Torque Specs
- Transmission Mounting Bolts
-- 85 ft-lb. w/Blue Loctite
- Drive Sprocket Drive Teeth Bolts
-- 88 ft-lb. -Dry
- Bogie Wheel (10” Idler) Retaining Bolt
-- 180 ft-lb. - w/Red Loctite
- 15” Idler Wheel Retaining Nut
-- 350 ft-lb. -Dry
- Drive Sprocket Lug Nut
-- 206 ft-lb. -Dry
- Drive Motor Mounting Bolts
-- 206 ft-lbs. -Dry
Cycle Times
• Lift-Arm up: 3.5 seconds (+/- .35 seconds)
• Lift-Arm Down: 3.3 seconds (+/- .33 seconds)
• Bucket Curl: 1.7 seconds (+/- .17 seconds)
• Bucket Dump: 1.9 seconds (+/- .19 seconds)
Service Tools
Listed below are common service tools which are iden-
tified and utilized in the service procedures described
in this manual. Use tools recommended by ASV when-
ever possible to reduce risk of injury and or machine
damage during service.
• ASV Jack Stands (2) (ASV P/N: 0402-900)
• Heavy Duty Hydraulic Jack (5-ton rating)
• Test Gauge Kit (ASV P/N: 0402-935)
• Ratchet Strap
• Long Pry Bar(s)
• ASV Service Cart (0402-871)
2. Technical Specifications
& Service Tools
2-1
11. PT-70 Specifications
Engine
- Model: Perkins 804C-33T
- Displacement: 3.3 liter
- Gross horsepower: 71 hp (53 kW)
- Torque: 173 lb-ft. (234 Nm)
- Idle rpm: 1000 (low idle), 2600 (high idle)
- Average water /thermostat temperature: 190°F,
87.8°C
Transmission
- Model: Cat A22VG45 tandem (Rexroth)
Drive Pumps
- Displacement: 2.7459 in3/rev (45 cc/rev)
- Relief pressure: 5500 psi (380 bar)
- Flow: 30.91 gpm (117 lpm) @ 2600 rpm (per
pump)
Charge Pump
- Displacement: 1.373 in3/rev (22.5 cc/rev)
- Relief pressure: 475 +/- 30 psi (32.75 bar)
- Flow: 15.4 gpm (58.3 lpm) @2600 rpm
Drive Motors
- Model: Rexroth MCR 05 C
- Displacement: 37.8 in3/rev (620 cc/rev)
Pilot Controls (Joysticks)
- Model: Rexroth 08-351
Auxiliary Pump
- Make: Rexroth
- Type: Axial Piston, Variable Load Sense
- Displacement: 2.75 in3/rev (45 cc/rev)
- Max Flow: 30 gpm (113.6 lpm) @ 2600 rpm
- Relief pressure: 3000 psi (20,680 kPa)
- Marginal (Standby) Pressure: 218 psi (1,503 kPa)
- Cooling/filtering: Oil is filtered and cooled at all
times. In auxiliary mode, the oil is filtered after the
attachment to protect the machine if the attach-
ment motor fails or contaminants are introduced
from the quick couplers.
Lift Arm Control Valve
- Make: Rexroth
- Type: Load Sense
Oil Cooler
- Operating pressure: 150 psi (1034 kPa)
- Bypass relief pressure: 80 psi (689 kPa)
- Hot oil sending unit: 225°F (107.2°C)
- Avg. oil operating temp. 50-60°F above ambient.
(High flow application 80°F above ambient.)
Critical Torque Specs
- Transmission Mounting Bolts
-- 85 ft-lb. w/Blue Loctite
- Drive Sprocket Drive Teeth Bolts
-- 88 ft-lb. -Dry
- 10” Idler Wheel Retaining Nut
-- 350 ft-lb. -Dry
- 15” Idler Wheel Retaining Nut
-- 350 ft-lb. -Dry
- Drive Sprocket Lug Nut
-- 129 ft-lb. -Dry
- Drive Motor Mounting Bolts
-- 129 ft-lbs. -Dry
Cycle Times
• Lift-Arm up: 3.5 seconds (+/- .35 seconds)
• Lift-Arm Down: 3.3 seconds (+/- .33 seconds)
• Bucket Curl: 1.7 seconds (+/- .17 seconds)
• Bucket Dump: 1.9 seconds (+/- .19 seconds)
Service Tools
Listed below are common service tools which are iden-
tified and utilized in the service procedures described
in this manual. Use tools recommended by ASV when-
ever possible to reduce risk of injury and or machine
damage during service.
• ASV Jack Stands (2) (ASV P/N: 0402-900)
• Heavy Duty Hydraulic Jack (5-ton rating)
• Test Gauge Kit (ASV P/N: 0402-935)
• Ratchet Strap
• Long Pry Bar(s)
• ASV Service Cart (0402-871)
2-2
Rubber Track Loader
2. Technical Specifications & Service Tools
12. Chapter Overview
This chapter contains diagrams for the following PT-
70/80 circuits: hydraulic charge circuit, hydraulic auxil-
iary circuit, hydraulic drive circuit, loader valve,
hydraulic pilot generation (solenoid) block and electri-
cal attachment outlet. It also contains hose routing
information for the control configurations for the drive
and lift arm pilot controls.
Figure 3-1 PT-70/80 Hydraulic Charge Circuit
Hydraulic Charge Circuit
3. Circuit Diagrams
3-1
OIL COOLER
TANK
INLET
CHARGE PUMP
FLOW
PILOT GEN BLOCK
CHARGE PRESSURE
TEST PORT
(475 +/- 30 PSI)
TO HYD Q/A (OPTIONAL PT-70)
TANK
5 MICRON FILTER
TANK
CHECK VALVE
(15 PSI) CHECK VALVE
(0 PSI)
CHARGE PRESSURE
RELIEF VALVE
(475 +/- 30 PSI)
13. Hydraulic Auxiliary Circuit
Figure 3-2 PT-70/80 Hydraulic Auxiliary Circuit
3-2
Rubber Track Loader
3. Circuit Diagrams
OIL COOLER
TO TANK
TO ATTACHMENT
CASE DRAIN Q/C
LOAD SENSE
TO LIFT ARM CYL.
TO AUXILIARY Q/C
TO TANK
FLOW
AUXILIARY PUMP
LOADER CONTROL
LIFT ARM VALVE
PILOT GEN. BLOCK
TO LIFT ARM CYL.
TO TANK
CHARGE PUMP INLET
TO BUCKET CYL.
CHECK VALVE
(80 PSI)
AUXILIARY PUMP INLET
14. Hydraulic Drive Circuit
Figure 3-3 PT-70/80 Hydraulic Drive Circuit
3-3
Rubber Track Loader
3. Circuit Diagrams
DRIVE MOTOR
DRIVE MOTOR DRIVE PUMP
DRIVE CONTROL
TO COOLER
TANK
CASE DRAIN
BRAKE
2-SPEED SHIFT (PT-80)
DRIVE PRESSURE
RELIEF VALVES (4)
5500 PSI
16. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.