Assignment
Prepare a vulnerability scanning report that will be prepared as the initial phase of a penetration
testing engagement. The goal of the scan is to identify weaknesses that are most likely to succeed
in gaining access to a network.
You have permission to execute an unrestricted vulnerability scan against the target network
range 192.168.42.1 - 192.168.42.100.
Reporting
The vulnerability scanning report must contain the following sections:
1. Scope and objective of engagement. This information must be presented in normal business-
style written English and should consists of no more than three of four paragraphs. Tools must be
listed using their name and version numbers. For example, mention that these scans were
conducted with Nessus Community Edition version 10.1.0.
2. Methods and tools used. This information must be presented in normal business-style written
English and should consists of no more than three of four paragraphs. Mention what kind of scan
you ran and what changes you made to any defaults set by the product. That way, the reader
could consider reproducing your results.
3. Prioritized findings. A prioritized list of findings. For each vulnerability, include reference to
CVE, CVSS, product/service affected, and a (brief) description of the mechanism of attack.
Vulnerabilities that are unlikely to result in access to systems must be listed, but can be simply
presented in an appendix as a table containing Product, CVE, CVSS. General comments When
writing a report, always make sure to include a title page that contains title, author, date, etc.
Avoid essay-style reports. Be complete but concise. Stick to the provided structure.
" I NEED HELP IN THIS REPORT".
For more classes visit
www.snaptutorial.com
Project 1
Step 1: Conduct a Security Analysis Baseline
In the first step of the project, you will conduct a security analysis baseline of the IT systems, which will include a data-flow diagram of connections and endpoints, and all types of access points, including wireless. The baseline report will be part of the overall security assessment report (SAR).
You will get your information from a data-flow diagram and report from the Microsoft Threat Modeling Tool
For more course tutorials visit
www.tutorialrank.com
Project 1
Step 1: Conduct a Security Analysis Baseline
In the first step of the project, you will conduct a security analysis baseline of the IT systems, which will include a data-flow diagram of connections and endpoints, and all types of access points, including wireless. The baseline report will be part of the overall security assessment report (SAR).
You will get your information from a data-flow diagram and report from the Microsoft Threat Modeling Tool 2016. The scope should include network IT security for the whole organization. Click the following to view the data-flow diagram: [diagram and report]
For more classes visit
www.snaptutorial.com
Project 1
Step 1: Conduct a Security Analysis Baseline
In the first step of the project, you will conduct a security analysis baseline of the IT systems, which will include a data-flow diagram of connections and endpoints, and all types of access points, including wireless. The baseline report will be part of the overall security assessment report (SAR).
For more classes visit
www.snaptutorial.com
Project 1
Step 1: Conduct a Security Analysis Baseline
In the first step of the project, you will conduct a security analysis baseline of the IT systems
FOR MORE CLASSES VISIT
www.cst630rank.com
Project 1 Step 1: Conduct a Security Analysis Baseline In the first step of the project, you will conduct a security analysis baseline of the IT systems, which will include a data-flow diagram of connections and endpoints, and all types of access points, including wireless. The baseline report will be part of the overall security assessment report (SAR). You will get your information from a data-flow diagram and report from the Microsoft Threat Modeling
For more classes visit
www.snaptutorial.com
Project 1
Step 1: Conduct a Security Analysis Baseline
In the first step of the project, you will conduct a security analysis baseline of the IT systems, which will include a data-flow diagram of connections and endpoints, and all types of access points, including wireless. The baseline report will be part of the overall security assessment report (SAR).
FOR MORE CLASSES VISIT
www.cst630rank.com
Project 1 Step 1: Conduct a Security Analysis Baseline In the first step of the project, you will conduct a security analysis baseline of the IT systems, which will include a data-flow diagram of connections and endpoints, and all types of access points, including wireless. The baseline report
For more classes visit
www.snaptutorial.com
Project 1
Step 1: Conduct a Security Analysis Baseline
In the first step of the project, you will conduct a security analysis baseline of the IT systems, which will include a data-flow diagram of connections and endpoints, and all types of access points, including wireless. The baseline report will be part of the overall security assessment report (SAR).
You will get your information from a data-flow diagram and report from the Microsoft Threat Modeling Tool
For more course tutorials visit
www.tutorialrank.com
Project 1
Step 1: Conduct a Security Analysis Baseline
In the first step of the project, you will conduct a security analysis baseline of the IT systems, which will include a data-flow diagram of connections and endpoints, and all types of access points, including wireless. The baseline report will be part of the overall security assessment report (SAR).
You will get your information from a data-flow diagram and report from the Microsoft Threat Modeling Tool 2016. The scope should include network IT security for the whole organization. Click the following to view the data-flow diagram: [diagram and report]
For more classes visit
www.snaptutorial.com
Project 1
Step 1: Conduct a Security Analysis Baseline
In the first step of the project, you will conduct a security analysis baseline of the IT systems, which will include a data-flow diagram of connections and endpoints, and all types of access points, including wireless. The baseline report will be part of the overall security assessment report (SAR).
For more classes visit
www.snaptutorial.com
Project 1
Step 1: Conduct a Security Analysis Baseline
In the first step of the project, you will conduct a security analysis baseline of the IT systems
FOR MORE CLASSES VISIT
www.cst630rank.com
Project 1 Step 1: Conduct a Security Analysis Baseline In the first step of the project, you will conduct a security analysis baseline of the IT systems, which will include a data-flow diagram of connections and endpoints, and all types of access points, including wireless. The baseline report will be part of the overall security assessment report (SAR). You will get your information from a data-flow diagram and report from the Microsoft Threat Modeling
For more classes visit
www.snaptutorial.com
Project 1
Step 1: Conduct a Security Analysis Baseline
In the first step of the project, you will conduct a security analysis baseline of the IT systems, which will include a data-flow diagram of connections and endpoints, and all types of access points, including wireless. The baseline report will be part of the overall security assessment report (SAR).
FOR MORE CLASSES VISIT
www.cst630rank.com
Project 1 Step 1: Conduct a Security Analysis Baseline In the first step of the project, you will conduct a security analysis baseline of the IT systems, which will include a data-flow diagram of connections and endpoints, and all types of access points, including wireless. The baseline report
FOR MORE CLASSES VISIT
www.cst630rank.com
Project 1 Step 1: Conduct a Security Analysis Baseline In the first step of the project, you will conduct a security analysis baseline of the IT systems, which will include a data-flow diagram of connections and endpoints, and all types of access points, including wireless. The baseline report will be part of the overall security assessment report (SAR). You will get your information
FOR MORE CLASSES VISIT
www.cst630rank.com
Project 1 Step 1: Conduct a Security Analysis Baseline In the first step of the project, you will conduct a security analysis baseline of the IT systems, which will include a data-flow diagram of connections and endpoints, and all types of access points, including wireless. The baseline report will be part of the overall security assessment report (SAR). You
The customer will typically be required to provide or choose a billing address, a mailing address, a delivery option, and payment details like a credit card number. As soon as the order is placed, a customer notification email is delivered.
Given the wide range of Source Code Analysis Tools, security professionals, auditors and developers alike are faced with the same developers alike are faced with the question: What is the best way to assess a Static Application Security Testing (SAST) tool for deployment?
Choosing the right tool requires different considerations during each stage of the SAST tool evaluation process.
Recently, Harbinger presented a session at the Pune round of STeP-IN Summit 2014, an International software testing conference. STeP-IN unlike many conferences dwelled right into the practical approaches towards improving the quality of software. Many interesting software testing strategies and methods like mind mapping, outcome based testing were discussed along with testing in mobile and social media era.
In our 2 hours speaker session ‘Smart Testing – Test less, Cover more, Benefit manifold’ conducted by Avinash Magdum, General Manager-Quality, Harbinger Systems, we talked about the root cause of defect leakages and their solutions to enable quality delivery with increased test coverage and reduced testing efforts.
Key AssignmentThe management team as well as your peers are happy .docxsleeperfindley
Key Assignment
The management team as well as your peers are happy with the work performed to this point:
Setting up Intrusion Detection Systems and audit data.
Defining and understanding vulnerabilities
Identifying various attack mechanisms
Creating a policy
The last and final step is to perform a vulnerability assessment against a workstation, server or combination and analyze the findings. Recommend the solutions to remediate any serious issues based on the established company policies.
It is important to know and understand the security posture of the devices attached to the network, as these might often be a step in a more sophisticated and multilevel attack of the infrastructure. An important step in the risk management process is to determine what vulnerabilities exist on these devices. Choose a vulnerability assessment tool and perform a vulnerability assessment against your target(s) in your environment, and report the findings. The information should include:
A description about the tool used to perform the scan.
A list of identified hosts (Obfuscate any specific IP addresses).
The list of serious (on a scale of 1-5 (1 being the highest) report the 1 and 2 issues)
Describe or list any false positive information.
Discuss potential safeguards and remediation actions that could be implemented for each finding to reduce the risk.
At this point the Key Assignment Template is Complete. The following Sections should be completed, and ensure to incorporate any feedback previously received from the instructor and peer reviews:
Title Page
Table of Contents (Updated to reflect correct page numbers)
Intrusion Tools and Techniques
Common Vulnerabilities and Exposures
Attack Methods
Intrusion Detection System Policies
Protective Measures
References
Add the discussion about the scan, the analysis and results and the remediation suggestions to the section titled:
Protective Measures.
.
Web Application Penetration Tests - ReportingNetsparker
These slides look into what is most probably the most overlooked stage of the website security assessment; reporting. The reporting stage is the ultimate deliverable from your security engagement.
PVS-Studio advertisement - static analysis of C/C++ codePVS-Studio
This document advertises the PVS-Studio static analyzer. It describes how using PVS-Studio reduces the number of errors in code of C/C++/C++11 projects and costs on code testing, debugging and maintenance. A lot of examples of errors are cited found by the analyzer in various Open-Source projects. The document describes PVS-Studio at the time of version 4.38 on October 12-th, 2011, and therefore does not describe the capabilities of the tool in the next versions. To learn about new capabilities, visit the product's site http://www.viva64.com or search for an updated version of this article.
Software Requirements Specification
for
<Project>
Version 1.0 approved
Prepared by <author>
<organization>
<date created>
Table of Contents
TOC \o "1-2" \t "TOCentry,1" Table of Contents
PAGEREF _Toc441230970 \h ii
Revision History
PAGEREF _Toc441230971 \h ii
1.
Introduction
PAGEREF _Toc441230972 \h 1
1.1
Purpose
PAGEREF _Toc441230973 \h 1
1.2
Document Conventions
PAGEREF _Toc441230974 \h 1
1.3
Intended Audience and Reading Suggestions
PAGEREF _Toc441230975 \h 1
1.4
Product Scope
PAGEREF _Toc441230976 \h 1
1.5
References
PAGEREF _Toc441230977 \h 1
2.
Overall Description
PAGEREF _Toc441230978 \h 2
2.1
Product Perspective
PAGEREF _Toc441230979 \h 2
2.2
Product Functions
PAGEREF _Toc441230980 \h 2
2.3
User Classes and Characteristics
PAGEREF _Toc441230981 \h 2
2.4
Operating Environment
PAGEREF _Toc441230982 \h 2
2.5
Design and Implementation Constraints
PAGEREF _Toc441230983 \h 2
2.6
User Documentation
PAGEREF _Toc441230984 \h 2
2.7
Assumptions and Dependencies
PAGEREF _Toc441230985 \h 3
3.
External Interface Requirements
PAGEREF _Toc441230986 \h 3
3.1
User Interfaces
PAGEREF _Toc441230987 \h 3
3.2
Hardware Interfaces
PAGEREF _Toc441230988 \h 3
3.3
Software Interfaces
PAGEREF _Toc441230989 \h 3
3.4
Communications Interfaces
PAGEREF _Toc441230990 \h 3
4.
System Features
PAGEREF _Toc441230991 \h 4
4.1
System Feature 1
PAGEREF _Toc441230992 \h 4
4.2
System Feature 2 (and so on)
PAGEREF _Toc441230993 \h 4
5.
Other Nonfunctional Requirements
PAGEREF _Toc441230994 \h 4
5.1
Performance Requirements
PAGEREF _Toc441230995 \h 4
5.2
Safety Requirements
PAGEREF _Toc441230996 \h 5
5.3
Security Requirements
PAGEREF _Toc441230997 \h 5
5.4
Software Quality Attributes
PAGEREF _Toc441230998 \h 5
5.5
Business Rules
PAGEREF _Toc441230999 \h 5
6.
Other Requirements
PAGEREF _Toc441231000 \h 5
Appendix A: Glossary
PAGEREF _Toc441231001 \h 5
Appendix B: Analysis Models
PAGEREF _Toc441231002 \h 5
Appendix C: To Be Determined List
PAGEREF _Toc441231003 \h 6
Revision History
Name
Date
Reason For Changes
Version
Introduction
Purpose
<Identify the product whose software requirements are specified in this document, including the revision or release number. Describe the scope of the product that is covered by this SRS, particularly if this SRS describes only part of the system or a single subsystem.>
Document Conventions
<Describe any standards or typographical conventions that were followed when writing this SRS, such as fonts or highlighting that have special significance. For example, state whether priorities for higher-level requirements are assumed to be inherited by detailed requirements, or whether every requirement statement is to have its own priority.>
Intended Audience and Reading Suggestions
<Describe the different types of reader that the document is intended for, such as developers, project managers, marketing staff, users, testers, and documentation writers. Describ.
Aplicar el Cap�tulo 11 de Bancarrota a Community Choice Financial In.pdftsekar2004
Aplicar el Captulo 11 de Bancarrota a Community Choice Financial Incorporated (CCFI).
Proporcione una lista de actividades e impactos que tendran lugar en el procedimiento del
Captulo 11. (Puede consultar el captulo 38 en su texto para obtener orientacin).
-Quiebra Captulo 11 = Reorganizacin - Captulo 11 (procedimiento de quiebra bajo el Ttulo 11
del Cdigo de Quiebras)
-captulo 38 = Ley federal de quiebras (menciona un detalle sobre Reorganizacin - Captulo 11).
Aplicando Lecciones Aprendidas(identificar-documento -Analizar-Almacenar -Recuperar )
enproyecto de reciclaje de aceite de cocina usado
por favor explique en detalles
por favor explique en detalles.
More Related Content
Similar to AssignmentPrepare a vulnerability scanning report that will be pre.pdf
FOR MORE CLASSES VISIT
www.cst630rank.com
Project 1 Step 1: Conduct a Security Analysis Baseline In the first step of the project, you will conduct a security analysis baseline of the IT systems, which will include a data-flow diagram of connections and endpoints, and all types of access points, including wireless. The baseline report will be part of the overall security assessment report (SAR). You will get your information
FOR MORE CLASSES VISIT
www.cst630rank.com
Project 1 Step 1: Conduct a Security Analysis Baseline In the first step of the project, you will conduct a security analysis baseline of the IT systems, which will include a data-flow diagram of connections and endpoints, and all types of access points, including wireless. The baseline report will be part of the overall security assessment report (SAR). You
The customer will typically be required to provide or choose a billing address, a mailing address, a delivery option, and payment details like a credit card number. As soon as the order is placed, a customer notification email is delivered.
Given the wide range of Source Code Analysis Tools, security professionals, auditors and developers alike are faced with the same developers alike are faced with the question: What is the best way to assess a Static Application Security Testing (SAST) tool for deployment?
Choosing the right tool requires different considerations during each stage of the SAST tool evaluation process.
Recently, Harbinger presented a session at the Pune round of STeP-IN Summit 2014, an International software testing conference. STeP-IN unlike many conferences dwelled right into the practical approaches towards improving the quality of software. Many interesting software testing strategies and methods like mind mapping, outcome based testing were discussed along with testing in mobile and social media era.
In our 2 hours speaker session ‘Smart Testing – Test less, Cover more, Benefit manifold’ conducted by Avinash Magdum, General Manager-Quality, Harbinger Systems, we talked about the root cause of defect leakages and their solutions to enable quality delivery with increased test coverage and reduced testing efforts.
Key AssignmentThe management team as well as your peers are happy .docxsleeperfindley
Key Assignment
The management team as well as your peers are happy with the work performed to this point:
Setting up Intrusion Detection Systems and audit data.
Defining and understanding vulnerabilities
Identifying various attack mechanisms
Creating a policy
The last and final step is to perform a vulnerability assessment against a workstation, server or combination and analyze the findings. Recommend the solutions to remediate any serious issues based on the established company policies.
It is important to know and understand the security posture of the devices attached to the network, as these might often be a step in a more sophisticated and multilevel attack of the infrastructure. An important step in the risk management process is to determine what vulnerabilities exist on these devices. Choose a vulnerability assessment tool and perform a vulnerability assessment against your target(s) in your environment, and report the findings. The information should include:
A description about the tool used to perform the scan.
A list of identified hosts (Obfuscate any specific IP addresses).
The list of serious (on a scale of 1-5 (1 being the highest) report the 1 and 2 issues)
Describe or list any false positive information.
Discuss potential safeguards and remediation actions that could be implemented for each finding to reduce the risk.
At this point the Key Assignment Template is Complete. The following Sections should be completed, and ensure to incorporate any feedback previously received from the instructor and peer reviews:
Title Page
Table of Contents (Updated to reflect correct page numbers)
Intrusion Tools and Techniques
Common Vulnerabilities and Exposures
Attack Methods
Intrusion Detection System Policies
Protective Measures
References
Add the discussion about the scan, the analysis and results and the remediation suggestions to the section titled:
Protective Measures.
.
Web Application Penetration Tests - ReportingNetsparker
These slides look into what is most probably the most overlooked stage of the website security assessment; reporting. The reporting stage is the ultimate deliverable from your security engagement.
PVS-Studio advertisement - static analysis of C/C++ codePVS-Studio
This document advertises the PVS-Studio static analyzer. It describes how using PVS-Studio reduces the number of errors in code of C/C++/C++11 projects and costs on code testing, debugging and maintenance. A lot of examples of errors are cited found by the analyzer in various Open-Source projects. The document describes PVS-Studio at the time of version 4.38 on October 12-th, 2011, and therefore does not describe the capabilities of the tool in the next versions. To learn about new capabilities, visit the product's site http://www.viva64.com or search for an updated version of this article.
Software Requirements Specification
for
<Project>
Version 1.0 approved
Prepared by <author>
<organization>
<date created>
Table of Contents
TOC \o "1-2" \t "TOCentry,1" Table of Contents
PAGEREF _Toc441230970 \h ii
Revision History
PAGEREF _Toc441230971 \h ii
1.
Introduction
PAGEREF _Toc441230972 \h 1
1.1
Purpose
PAGEREF _Toc441230973 \h 1
1.2
Document Conventions
PAGEREF _Toc441230974 \h 1
1.3
Intended Audience and Reading Suggestions
PAGEREF _Toc441230975 \h 1
1.4
Product Scope
PAGEREF _Toc441230976 \h 1
1.5
References
PAGEREF _Toc441230977 \h 1
2.
Overall Description
PAGEREF _Toc441230978 \h 2
2.1
Product Perspective
PAGEREF _Toc441230979 \h 2
2.2
Product Functions
PAGEREF _Toc441230980 \h 2
2.3
User Classes and Characteristics
PAGEREF _Toc441230981 \h 2
2.4
Operating Environment
PAGEREF _Toc441230982 \h 2
2.5
Design and Implementation Constraints
PAGEREF _Toc441230983 \h 2
2.6
User Documentation
PAGEREF _Toc441230984 \h 2
2.7
Assumptions and Dependencies
PAGEREF _Toc441230985 \h 3
3.
External Interface Requirements
PAGEREF _Toc441230986 \h 3
3.1
User Interfaces
PAGEREF _Toc441230987 \h 3
3.2
Hardware Interfaces
PAGEREF _Toc441230988 \h 3
3.3
Software Interfaces
PAGEREF _Toc441230989 \h 3
3.4
Communications Interfaces
PAGEREF _Toc441230990 \h 3
4.
System Features
PAGEREF _Toc441230991 \h 4
4.1
System Feature 1
PAGEREF _Toc441230992 \h 4
4.2
System Feature 2 (and so on)
PAGEREF _Toc441230993 \h 4
5.
Other Nonfunctional Requirements
PAGEREF _Toc441230994 \h 4
5.1
Performance Requirements
PAGEREF _Toc441230995 \h 4
5.2
Safety Requirements
PAGEREF _Toc441230996 \h 5
5.3
Security Requirements
PAGEREF _Toc441230997 \h 5
5.4
Software Quality Attributes
PAGEREF _Toc441230998 \h 5
5.5
Business Rules
PAGEREF _Toc441230999 \h 5
6.
Other Requirements
PAGEREF _Toc441231000 \h 5
Appendix A: Glossary
PAGEREF _Toc441231001 \h 5
Appendix B: Analysis Models
PAGEREF _Toc441231002 \h 5
Appendix C: To Be Determined List
PAGEREF _Toc441231003 \h 6
Revision History
Name
Date
Reason For Changes
Version
Introduction
Purpose
<Identify the product whose software requirements are specified in this document, including the revision or release number. Describe the scope of the product that is covered by this SRS, particularly if this SRS describes only part of the system or a single subsystem.>
Document Conventions
<Describe any standards or typographical conventions that were followed when writing this SRS, such as fonts or highlighting that have special significance. For example, state whether priorities for higher-level requirements are assumed to be inherited by detailed requirements, or whether every requirement statement is to have its own priority.>
Intended Audience and Reading Suggestions
<Describe the different types of reader that the document is intended for, such as developers, project managers, marketing staff, users, testers, and documentation writers. Describ.
Similar to AssignmentPrepare a vulnerability scanning report that will be pre.pdf (20)
Aplicar el Cap�tulo 11 de Bancarrota a Community Choice Financial In.pdftsekar2004
Aplicar el Captulo 11 de Bancarrota a Community Choice Financial Incorporated (CCFI).
Proporcione una lista de actividades e impactos que tendran lugar en el procedimiento del
Captulo 11. (Puede consultar el captulo 38 en su texto para obtener orientacin).
-Quiebra Captulo 11 = Reorganizacin - Captulo 11 (procedimiento de quiebra bajo el Ttulo 11
del Cdigo de Quiebras)
-captulo 38 = Ley federal de quiebras (menciona un detalle sobre Reorganizacin - Captulo 11).
Aplicando Lecciones Aprendidas(identificar-documento -Analizar-Almacenar -Recuperar )
enproyecto de reciclaje de aceite de cocina usado
por favor explique en detalles
por favor explique en detalles.
An�lisis FODA para una dulcer�a local saludable con fortalezas exter.pdftsekar2004
Anlisis FODA para una dulcera local saludable con fortalezas externas e internas, debilidades
externas e internas, oportunidades externas e internas y amenazas externas e internas.
Fortalezas; desde dentro (interno) y desde fuera (externo).
las debilidades, las oportunidades y las amenazas pueden provenir del interior o pueden ser
precipitadas por factores externos.
respuesta directa por favor.
An�lisis de Shoe Corporation of Illinois. Analice la estructura or.pdftsekar2004
Anlisis de Shoe Corporation of Illinois.
Analice la estructura organizacional de Shoe Corporation, incluido cmo la cultura corporativa ha
impactado la estructura.
Qu sugerencias tiene para mejorar el flujo de informacin?
Cmo caracterizara la actual interdependencia entre departamentos? Qu tcnicas de gestin usara
para ayudar a facilitar el cambio dada la interdependencia dentro de la empresa?
Dado que la intencin del presidente es cambiar los estilos de zapatos con frecuencia, cmo se
podra fomentar la innovacin?.
answer these two questions 1 . why are brand marketers concerned.pdftsekar2004
answer these two questions :
1 . why are brand marketers concerned with stimulus discrimination ?
2. individuals react to other similar stimuli in much the same way as they responded to and
original stimulus ; what is this phenomenon? How can marketers use it?
1 . why are brand marketers concerned with stimulus discrimination ?
2. individuals react to other similar stimuli in much the same way as they responded to and
original stimulus ; what is this phenomenon? How can marketers use it?.
An�lisis de caso de desarrollo de liderazgo Pat Talley se puso de .pdftsekar2004
Anlisis de caso de desarrollo de liderazgo
Pat Talley se puso de pie y observ, con admiracin a regaadientes, mientras Carmelita Surez
trabajaba en la habitacin. Aguda, encantadora y armada con una personalidad que dej un
recuerdo imborrable, Carmelita en un momento tena la oreja del CEO Chris Blount y al siguiente
se la poda observar sonriendo y estudiando algo en su cuaderno electrnico con el asistente
ejecutivo de una importante junta. miembro. Ella es asombrosa, le susurr Kent Schlain a Pat
mientras le serva un cctel. Me gusta observar y aprender. Ella es una verdadera educacin en
poltica de oficina. No estamos en poltica, respondi Pat a la defensiva. Estamos en TI. Vamos,
Pat. brome Kent. Dime que ella no te preocupa. Todo el mundo sabe que ella es su principal
competencia para el puesto de CIO. Pat sonri, tom un sorbo de su whisky con agua y dijo con
sarcasmo: Estoy preocupado. Satisfecho?"
Al alejarse de las maliciosas incitaciones de Kent, la confianza habitual de Pat sufri una fugaz
punzada de miedo. No, estoy bien. Estoy bien, pens. Tengo ms experiencia que nadie, incluida
Carmelita, y no tengo miedo de establecer la ley para completar los proyectos. Despus de
semanas de especulaciones, entrevistas, visitas in situ de altos ejecutivos y esperas interminables,
el CEO Blount deba tomar una decisin sobre el nuevo CIO y anunciarla esta semana durante la
reunin anual. Aunque Mansfield, Inc. contaba con un grupo de TI extraordinariamente talentoso,
los expertos de la empresa y los observadores de la industria acordaron que la decisin se reducira
a elegir entre Carmelita Suarez y Pat Talley. Hasta este punto, Pat contaba con la confianza de un
excelente rcord de 20 aos con Mansfield. Dotado tcnicamente, fue uno de los miembros del
equipo que dise e implement el sistema de TI original de la empresa y ha sido un jugador
importante a lo largo de los aos en la orientacin de su crecimiento y expansin. Orientado a las
tareas casi hasta el extremo, Pat se gan la reputacin de ser un tipo que analizaba las necesidades
sin descanso y luego avanzaba hasta completar el trabajo, por lo general por debajo del
presupuesto. Su fortaleza especial resida en las reas gemelas de seguridad electrnica y gestin de
riesgos. Pat consider que la experiencia tcnica y la competencia son las calificaciones para el
puesto de CIO, como explic durante una entrevista reciente con ejecutivos y miembros de la
junta. Nuestro trabajo y reputacin deben ser las nicas consideraciones, enfatiz Pat. Mi trabajo no
es charlar y dar la mano. No me postulo para un cargo pblico. Dirijo una divisin de TI. A lo largo
de los aos, Pat mantuvo reas estrictamente definidas de trabajo y amistad y, de hecho, poda
contar con los dedos de una mano el nmero de amistades casuales relacionadas con el trabajo que
haba desarrollado durante 20 aos. Estaba orgulloso de su capacidad para compartimentar estas
reas de modo que las relaciones personales no influyeran en las decisiones de gestin. Consider
qu.
Antes de la promulgaci�n de la Ley de Seguridad de los Ingresos de.pdftsekar2004
Antes de la promulgacin de la Ley de Seguridad de los Ingresos de Jubilacin de los Empleados
de 1974 (ERISA), los empleadores podan discriminar a los empleados de varias maneras,
incluidas todas las siguientes, excepto:
Opcin multiple
elegibilidad para beneficios de pensin.
la cantidad de tiempo necesaria para obtener un beneficio de pensin completa.
prdida de beneficios debido a la venta de la empresa justo antes de la adjudicacin.
terminacin del plan de pensiones justo despus de que los empleados lo adquieran..
answers arent clear d. Residents of Lilliput .pdftsekar2004
answers arent clear
d. Residents of Lilliput hold real money balances and experience shoeleather costs, e. Firms in
Lilliput face menu costs. f. If both nations tax nominal capital gains, the after-tax real return on
savings is in Lilliput. g. Inflation uncertainty is probably in Lilliput..
answerhelp with 13 14 and. short reflection 13. What gene is m.pdftsekar2004
answer
help with 13 14 and. short reflection 13. What gene is mutated in some that might have cause
resistance to the plague? What is the name of the mutated gene? 14. How was Eyam's Delta 32
rate verified to be significant? Short Reflection: (1 Page) Short reflection paper of what you
thought of the videos' main points. Make sure you address the flowing questions How was
Biotechnology used to understand the connection between the Black Death and AIDS? With the
information learned in the film how can Biotechnology be
13. What gene is mutated in some that might have cause resistance to the plague? What is the
name of the mutated gene? 14. How was Eyam's Delta 32 rate verified to be significant? Short
Reflection: (1 Page) Short reflection paper of what you thought of the videos' main points. Make
between the Black Death and AIDS? With the information learned in the film how can Biond the
connectionnology be used to heln tho hiumar.
AssignmentModify the Python program by adding the create_dictiona.pdftsekar2004
Assignment:
Modify the Python program by adding the create_dictionary function. The parameter file_name
is the name of the csv file that contains several lines of ASCII encodings. The format of this file
is described in the link above. The function should return a dictionary where the keys are
characters and the values are the 8 bit representations. Note: use the characters for comma, quote,
and space characters, instead of the words comma, quote, and space.
Add the translate function. The parameter sentence consists of a number of characters. The
parameter dictionary is the dictionary returned by the create_dictionary function. The parameter
file_name is the name of the output file where all output should be sent. In the output file, the
text should be a binary string (zeros and ones only) with each 8 bit ascii code appearing one after
the other. (see sample transcripts)
If a character does not appear in the dictionary, the string "\nUNDEFINED\n" should appear
instead of an 8 bit representation.
When the program is run, it should produce the following three output files: output-1.txt, output-
2.txt and output-3.txt.
Grading:
2 points - The create_dictionary function returns a dictionary that contains the correct binary
code for each character of length one.
1 point - The create_dictionary function returns a dictionary that contains the correct binary code
for comma, quote, and space.
3 points - When your program is tested with different values for the variable sentence, all
characters that exist in the dictionary are translated correctly.
1 point - When your program is tested with different values for the variable sentence, characters
that do NOT exist in the dictionary are translated correctly to the word UNDEFINED on a line of
its own.
1 point - The format of any output files created match the format of the sample output files
exactly. def create_dictionary(f): \# f is the filename; rename the parameter as you wish pass \#
open the file for reading and assign to a file handle variable* \# make a dictionary variable -- it
can be empty to start with \# use the file handle variable step through each line doing this.." \#
make the line into a list, splitting it up at the commas \# optional: temporarily try printing it out.
What you expected? \# assign the binary number to a variable as a string \# optional: temporarily
try printing it out. What you expected? \# assign the character to a variable as a string \#
optional: temporarily try printing it out. What you expected? \# use the two new variables to add
an entry to the dictionary \# optional: temporarily try printing it out. What you expected? \#
Note: you will want the comma, space, and quote mark keys to be those actual characters.". \#
"make sure that gets handled at some point before returning the dictionary \# *don't forget to
close the file \# return the dictionary to where it was called from def translate(s, d, f): \# rename
the parameters as you wish pass
010000010010000001101100011.
Answer the questions about the instructions Topic Pregnancychoos.pdftsekar2004
Answer the questions about the instructions
Topic: Pregnancy/choosing to have a family
Context: Mary are having lunch with 2 colleagues, one of whom has recently joined the firm.
She are professionals who work in high-profile roles in a traditionally male-dominated industry.
As the newer colleague discusses the possibility of her and her partner adopting and staffing a
family, she more-tenured colleague hesitatingly says the following:
Comment: Look, I don't want anyone blindsided the way Mary was, so she telling people in
confidence, okay? Do she know what happened when her boss (now her boss) found out she was
pregnant? He stood up and yelled, 'F#*@! Are you kidding me? What the hell are we supposed
to do if you go off on vacation for a year?' She reported it to HR and they told her to just keep
her head down and not make a fuss about the boss's behaviour because that was just how he
was!"
Instructions: Imagine she want to break the silence. Work through the following, assuming that
she choose to try to learn more and get advice from her colleague on how to navigate this
situation for yourself:
Questions:
1. Recognizing the discomfort her colleague is facing, how would continue with the discussion?
What to say? How would express the purpose in continuing the conversation? Practice your
words out loud until you find language that you would feel comfortable saying.
2. How might the request to keep talking be received? Role play the conversation, if possible.
3. What factors make it difficult to dig deeper when the silence has been broken with regard to
this type of situation?
4. What fears or concerns come to mind? What questions come to mind?
5. Have ever encountered something like this? What happened? What do wish had happened?
6. Determine what to do in the future. What options can think of what conversations might have
happened?.
Assessment Description You are required to do the modelli.pdftsekar2004
Assessment Description
You are required to do the modelling for a database of given the following design requirements.
Aim: to give you practical experience in using entity-relationship and relational modelling
techniques.
Assignment 1 Database Modelling & Development of an ER Diagram and Schema
Course Objectives:
This assessment task focuses on the following course objective:
Develop a normalised database design and implement the design.
Due Date:
Submit a soft copy by 23:55 on the Sunday of Week 8. (Refer to unit outline on Moodle site for
further dates and times).
Project Specification & Problem Domain
You have been commissioned by the manager at a local hotel in Sydneyto design a database to
assist them with managing their hotel bookings and billing. The hotel has increased in size to a
total of 100 rooms. Without automation, the management of the hotel has become an unwieldy
task. The end users day-to-day work of managing the hotel will be much easier with the
database application. You are only required to provide the design of the database at this stage.
The hotel manager needs a system that keeps track of its bookings (future, current, and archived),
rooms, and guests. A room can be of a particular type and a particular price band. Room prices
vary from room to room (depending on its type, available facilities, view, etc.) and from season
to season (depending on the time of the year).
The main purpose of the Hotel Management System (HMS) database is to assist staff with
maintaining a record of guest bookings and payments for services. The database will also allow
managers to receive information on room occupancy and revenue.
The hotel would like to store information regarding its guests. For guests, they would like to
store the contact title (e.g., Mr, Mrs), contact name, address details (including their street, city,
and postcode), email address and phone numbers (mobile, home, work), drivers license number,
passport number, date entered, and loyalty card number.
The manager would like to store notes related to each guest. Guest notes should include the
entry date, entry time, initials of the user entering the note, details of the note, assigned to (which
is used to assign or delegate the note to another staff person, a follow-up date, and a completed
date. The manager would like to trial the use of notes when guests make reservations, request a
room change, and record any other details which require some action by a staff member.
In the database, the manager would also like to store information about their staff. Staff may be
employed full-time, part-time, or on a casual basis. The hotel needs to store contact information
for the staff (address and phone), along with their TFN. Some staff members are supervisors of
other staff members, and this also needs to be identified.
In the database, the manager would also like to store information about their services which
includes a service code, and a service description. The service charge.
Assignment2 (driver class) Agency reference to the Agency class pub.pdftsekar2004
Assignment2 (driver class) Agency: reference to the Agency class public void init() throws
FileNotFoundException: This method gets the ArrayList and ArrayList form AddressReader and
PropertyReader, and uses them to create subtype Objects and adds them to the Agency.HashMap
properties public void doSearches(): This method provides the primary user interface through
command prompts that will allow the user to choose which search operations to perform. See the
Sample Interface below. Each search will display results to the console. public static void
main(String[] args) throws FileNotFoundException: Will create an instance of Assignment2 and
use that to call init() and then doSearches.
Assignment-2 on Windows Server Administration (Note Partial Marks a.pdftsekar2004
Assignment-2 on Windows Server Administration (Note: Partial Marks are available for partially
done work) You are working as a Network Administrator at ABC Technical
Solution
s. Recently your company has undertaken a big project to install a domain based network with
around 245 users. Under this project, you are setting up the network as per following
information: Network Domain : ilac.edu Main Server Name: Your last Name+last 2 digit of
Student ID FQDN : (Your last Name+last 2 digit of.
Assignment Introduction to AWS Iot and Cloud StorageInstructions.pdftsekar2004
Assignment: Introduction to AWS Iot and Cloud Storage
Instructions
Please answer the following questions in a separate text document:
1. (2) What is AWS IoT and why was it created?
2. (2) What are the benefits of using AWS IoT as opposed to a custom-built approach?
3. (2) What AWS services can work with AWS IoT?
4. (3) What are 3 different communication protocols AWS IoT uses to communicate with
hardware devices?
5. (2) What is a Device Shadow ?
6. (2) What is the Device Gateway used for by AWS IoT?
7. (2) What is AWS IoT Greengrass and where is it used?
8. (4) What are 2 types of cloud storage options you can use alongside AWS and AWS IoT?
What are examples of data you would store in each type?
9. (3) What are 3 major use cases for cloud storage? How do these relate to IoT?.
Assignment DetailsThe board of Trustees of an organization tasked .pdftsekar2004
Assignment Details
The board of Trustees of an organization tasked you with presenting why you believe they
should or not invest in virtualization software. This assignment should enlighten the board as to
whether or not you believe virtualization would be a worthwhile project to explore further.
Research the pros and cons that virtualization would offer the company and create a report
highlighting any crucial features that only virtualization may offer
You will need to write your findings in a formal report format, just like you would present your
research to the board. . Remember that a Board of Trustees is interested in technical concerns
and business drivers.
Success Criterial/Deliverable
* Minimum two (2) pages written in a business report format (search critics for examples if you
are unfamiliar with business reports)
* Articulated pros and cons for utilizing virtualization in a business settings
* A clear argument for OR against leveraging virtualization in this business
* Backing the argument with at least three (3) cited external sources
* An exploit recommendation based on the details provided in the writtenresponse.
Assignment on Pen testing1. Executive Summary(Which PT is rele.pdftsekar2004
Assignment on Pen testing
1. Executive Summary
(Which PT is relevant to this section? )
Introduction
DISCUSS: What is the target? What assessment type did you use?
(How long should this be? 3-4 sentences)
Scope
Describe the scope of your penetration test. What methods or approaches did you use?
(How long should this be? 3-4 sentences)
Overview
1. Planning and Reconnaissance
(SUMMARIZE: provide a 1-sentence summary of your findings in this section)
2. Social Engineering and Physical Security
(SUMMARIZE: provide a 1-sentence summary of your findings in this section)
3. Scanning the Network
(SUMMARIZE: provide a 1-sentence summary of your findings in this section)
3. Gaining Access
(SUMMARIZE: provide a 1-sentence summary of your findings in this section)
3. Exploits and Attacks
(SUMMARIZE: provide a 1-sentence summary of your findings in this section)
Overall Recommendations
(Provide a minimum of 7 recommendations here for the target to strengthen their security. For
each recommendation, please rate it as high, medium, or low importance. Explain your
rationale.)
1. Recommendation:(1-2 sentences -- based on your findings, recommend a specific thing the
target should do to strengthen their security)
Importance: (high, medium, or low)
Rationale (1 sentence - why is this important?)
2. Recommendation:
Importance:
Rationale:
3. Recommendation:
Importance:
Rationale:
4. Recommendation:
Importance:
Rationale:
5. Recommendation:
Importance:
Rationale:
6. Recommendation:
Importance:
Rationale:
7. Recommendation:
Importance:
Rationale:
2. Planning and Reconnaissance
(Which PT is relevant to this section? )
Overview
Provide a 1-3 sentence summary of your findings related to Planning and Reconnaissance.
(TIP: write this overview AFTER you have detailed your findings, below!)
Detail Findings:
1. Potential Attack Surfaces
Website (include a list of all domains registered to the target)
Network (include all networks you can discover)
Insiders (include a list of all important people and their contact information)
Email (include email server info)
Social media accounts (include social media accounts of the target)
Physical locations (include addresses, photos, and maps)
Be sure to include photos and as many details as possible!
3. Social Engineering and Physical Security
(Which PT is relevant to this section?)
Overview
Provide a 1-3 sentence summary of your findings related to Social Engineering and Physical
Security
(TIP: write this overview AFTER you have detailed your findings, below!)
List of vulnerabilities identified
Provide a brief list of the vulnerabilities relevant to this section (which you will detail below)
Details:
Vulnerability 3.1
Description:
(What is this vulnerability? Describe and document it. Write at least 3-4 sentences. Provide
screenshots or other illustrations, where possible.)
Exploitation:
(How would someone exploit this vulnerability? Explain, in at least 3 sentences.)
Impact:
(If an attacker exploited this vulnerability, what could .
The French Revolution, which began in 1789, was a period of radical social and political upheaval in France. It marked the decline of absolute monarchies, the rise of secular and democratic republics, and the eventual rise of Napoleon Bonaparte. This revolutionary period is crucial in understanding the transition from feudalism to modernity in Europe.
For more information, visit-www.vavaclasses.com
Ethnobotany and Ethnopharmacology:
Ethnobotany in herbal drug evaluation,
Impact of Ethnobotany in traditional medicine,
New development in herbals,
Bio-prospecting tools for drug discovery,
Role of Ethnopharmacology in drug evaluation,
Reverse Pharmacology.
Operation “Blue Star” is the only event in the history of Independent India where the state went into war with its own people. Even after about 40 years it is not clear if it was culmination of states anger over people of the region, a political game of power or start of dictatorial chapter in the democratic setup.
The people of Punjab felt alienated from main stream due to denial of their just demands during a long democratic struggle since independence. As it happen all over the word, it led to militant struggle with great loss of lives of military, police and civilian personnel. Killing of Indira Gandhi and massacre of innocent Sikhs in Delhi and other India cities was also associated with this movement.
How to Create Map Views in the Odoo 17 ERPCeline George
The map views are useful for providing a geographical representation of data. They allow users to visualize and analyze the data in a more intuitive manner.
How to Split Bills in the Odoo 17 POS ModuleCeline George
Bills have a main role in point of sale procedure. It will help to track sales, handling payments and giving receipts to customers. Bill splitting also has an important role in POS. For example, If some friends come together for dinner and if they want to divide the bill then it is possible by POS bill splitting. This slide will show how to split bills in odoo 17 POS.
Synthetic Fiber Construction in lab .pptxPavel ( NSTU)
Synthetic fiber production is a fascinating and complex field that blends chemistry, engineering, and environmental science. By understanding these aspects, students can gain a comprehensive view of synthetic fiber production, its impact on society and the environment, and the potential for future innovations. Synthetic fibers play a crucial role in modern society, impacting various aspects of daily life, industry, and the environment. ynthetic fibers are integral to modern life, offering a range of benefits from cost-effectiveness and versatility to innovative applications and performance characteristics. While they pose environmental challenges, ongoing research and development aim to create more sustainable and eco-friendly alternatives. Understanding the importance of synthetic fibers helps in appreciating their role in the economy, industry, and daily life, while also emphasizing the need for sustainable practices and innovation.
Instructions for Submissions thorugh G- Classroom.pptxJheel Barad
This presentation provides a briefing on how to upload submissions and documents in Google Classroom. It was prepared as part of an orientation for new Sainik School in-service teacher trainees. As a training officer, my goal is to ensure that you are comfortable and proficient with this essential tool for managing assignments and fostering student engagement.
How to Make a Field invisible in Odoo 17Celine George
It is possible to hide or invisible some fields in odoo. Commonly using “invisible” attribute in the field definition to invisible the fields. This slide will show how to make a field invisible in odoo 17.
Students, digital devices and success - Andreas Schleicher - 27 May 2024..pptxEduSkills OECD
Andreas Schleicher presents at the OECD webinar ‘Digital devices in schools: detrimental distraction or secret to success?’ on 27 May 2024. The presentation was based on findings from PISA 2022 results and the webinar helped launch the PISA in Focus ‘Managing screen time: How to protect and equip students against distraction’ https://www.oecd-ilibrary.org/education/managing-screen-time_7c225af4-en and the OECD Education Policy Perspective ‘Students, digital devices and success’ can be found here - https://oe.cd/il/5yV
AssignmentPrepare a vulnerability scanning report that will be pre.pdf
1. Assignment
Prepare a vulnerability scanning report that will be prepared as the initial phase of a penetration
testing engagement. The goal of the scan is to identify weaknesses that are most likely to succeed
in gaining access to a network.
You have permission to execute an unrestricted vulnerability scan against the target network
range 192.168.42.1 - 192.168.42.100.
Reporting
The vulnerability scanning report must contain the following sections:
1. Scope and objective of engagement. This information must be presented in normal business-
style written English and should consists of no more than three of four paragraphs. Tools must be
listed using their name and version numbers. For example, mention that these scans were
conducted with Nessus Community Edition version 10.1.0.
2. Methods and tools used. This information must be presented in normal business-style written
English and should consists of no more than three of four paragraphs. Mention what kind of scan
you ran and what changes you made to any defaults set by the product. That way, the reader
could consider reproducing your results.
3. Prioritized findings. A prioritized list of findings. For each vulnerability, include reference to
CVE, CVSS, product/service affected, and a (brief) description of the mechanism of attack.
Vulnerabilities that are unlikely to result in access to systems must be listed, but can be simply
presented in an appendix as a table containing Product, CVE, CVSS. General comments When
writing a report, always make sure to include a title page that contains title, author, date, etc.
Avoid essay-style reports. Be complete but concise. Stick to the provided structure.
" I NEED HELP IN THIS REPORT"
