This document provides information on various abrasive and grinding products from Taipan, including: - Cutting discs and flap discs in different sizes, materials (aluminum, stainless steel), and grits for cutting various materials. - Wire brushes, knot wheels, cup brushes and bevel brushes for surface preparation and finishing in various sizes and materials. - "Platinum" is the highest quality designation for extra fine cutting discs that cut quickly with low pressure. Ceramic grinding discs provide flexible grinding with a consistent finish.

2. Platinum Quality
The Taipan ‘Platinum’ status is reserved for only the
very best abrasive products, offering unbeatable
performance and wear life.
Extra Fine... EXTREMELY FAST!
The extra-fine cutting disc Razor-Cut AS 60
with a thickness of 1.0mm (.035’) or
1.2mm (.045”) is the right choice for cutting
thin-walled profiles and pipes, thin sheets
and ropes. The extra-smooth cutting disc is
characterized by its fast and smooth cutting
with low contact pressure.

3. Extra Fine... EXTREMELY FAST!
Look for our RED LIFETIME-PLUS freshness seal!
• Discs come packaged in
25s in convenient,
stackable, durable steel
tins
• Sizes 4-1/2” and 5” discs
only
• Over 30% * more service-
life (number of cuts)
• Stops the natural aging
process of synthetic resin-
bonded discs
• Keeps cutting discs fresh
until the pack is
opened for the
first time
TO-6550 5” x .045” x 7/8” Depressed 12,250 1-TCPRD125X12A 25 $2.83
PART# SIZE IN. TYPE RPM ARTICLE# QTY PRICE
Aluminum Cutting Discs • Razor Cut • Platinum
TP-6002 4-1/2” x .035” x 7/8” Flat 13,280 1-TCPRF115X10 25 $2.67
TP-6004 5” x .035” x 7/8” Flat 12,200 1-TCPRF125X10 25 $2.83
TP-6006 4-1/2” x .045” x 7/8” Flat 13,280 1-TCPRF115X12 25 $2.28
TP-6008 5” x .045” x 7/8” Flat 12,200 1-TCPRF125X12 25 $2.39
TP-6010 6” x .045” x 7/8” Flat 10,200 1-TCPRF150X12 25 $3.61
TP-6012 4-1/2” x .045” x 7/8” Depressed 13,280 1-TCPRD115X12 25 $2.60
TP-6014 5” x .045”x 7/8” Depressed 12,200 1-TCPRD125X12 25 $2.67
TP-6016 6” x .045” x 7/8” Depressed 10,200 1-TCPRD150X12 25 $3.68
TP-6018 7” x .062” x 7/8” Depressed 8,600 1-TCPRD180X12 25 $3.84
PART# SIZE IN. TYPE RPM ARTICLE# QTY PRICE
Cutting Discs • Razor Cut • Platinum
AS60-T-INOX
ALUMINUMSTAINLESSSTEEL
ALUMINUM

4. Features: This best-seller has a brilliant price/performance ratio and has proven itself
time and again. The Original line shows best results on every angle grinder. Professional
use in every application demands the right disc, therefore
abrasive grits and bonds exactly match the material.
This increases performance and minimizes
working time.

5. Notching/Grinding Discs
Original A60-QBF
TO-6100 4” x 3/32” x 5/8” 15,300 25 $2.39
TO-6102 4-1/2” x 3/32” x 7/8” 13,300 25 $2.55
TO-6104 5” x 3/32” x 7/8” 12,250 25 $2.82
TO-6106 6” x 3/32” x 7/8” 10,200 25 $3.22
TO-6108 7” x 3/32” x 7/8” 8,500 25 $3.73
TO-6110 4” x 1/8” x 5/8” 15,300 25 $2.62
TO-6112 4-1/2” x 1/8” x 7/8” 13,300 25 $2.54
TO-6114 5” x 1/8” x 7/8” 12,250 25 $2.67
TO-6116 6” x 1/8” x 7/8” 10,200 25 $2.82
TO-6118 7” x 1/8” x 7/8” 8,500 25 $3.73
TO-6120 4” x 1/4” x 5/8” 15,300 25 $2.61
TO-6122 4-1/2” x 1/4” x 7/8” 13,300 25 $2.85
TO-6124 5” x 1/4” x 7/8” 12,250 25 $2.92
TO-6126 6” x 1/4” x 7/8” 10,200 25 $3.99
TO-6128 7” x 1/4” x 7/8” 8,500 25 $4.43
PART# SIZE IN. RPM QTY PRICE
STAINLESSSTEEL
• Resin bonded
• Reinforced with glass fibre
• Good lifetime
• Good removal rate
• Good for steel and
stainless steel
• Contaminant-free
Original Quality:
The Taipan Original series is a
base range of industrial
abrasives delivering safe,
reliable, quality and good
value. Our everyday
workhorse product line.

6. • Flexible grinding
• Consistent finish
• Cooler grinding
• Longer lasting Ceramic material
• Trimable backing means longer life and product usage

7. TP-5200 5” x 5/8”- 11 QUICKSPIN - TRIMABLE BACK - CERAMIC #40 12,250 10 $10.99
TP-5202 5” x 5/8”- 11 QUICKSPIN - TRIMABLE BACK - CERAMIC #60 12,250 10 $10.99
TP-5204 5” x 5/8”- 11 QUICKSPIN - TRIMABLE BACK - CERAMIC #80 12,250 10 $10.99
TP-5206 5” x 5/8”- 11 QUICKSPIN - TRIMABLE BACK - CERAMIC #120 12,250 10 $10.99
TP-5208 6” x 5/8”- 11 QUICKSPIN - TRIMABLE BACK - CERAMIC #40 10,200 10 $12.99
TP-5210 6” x 5/8”- 11 QUICKSPIN - TRIMABLE BACK - CERAMIC #60 10,200 10 $12.99
TP-5212 6” x 5/8”- 11 QUICKSPIN - TRIMABLE BACK - CERAMIC #80 10,200 10 $12.99
TP-5214 6” x 5/8”- 11 QUICKSPIN - TRIMABLE BACK - CERAMIC #120 10,200 10 $12.99
TP-5216 7” x 5/8”- 11 QUICKSPIN - TRIMABLE BACK - CERAMIC #40 8,500 10 $15.99
TP-5218 7” x 5/8”- 11 QUICKSPIN - TRIMABLE BACK - CERAMIC #60 8,500 10 $15.99
TP-5220 7” x 5/8”- 11 QUICKSPIN - TRIMABLE BACK - CERAMIC #80 8,500 10 $15.99
TP-5222 7” x 5/8”- 11 QUICKSPIN - TRIMABLE BACK - CERAMIC #120 8,500 10 $15.99
PART# SIZE IN. DESCRIPTION GRIT RPM QTY PRICE
Ceramic Razor Flap Discs • Platinum
STEEL STAINLESS ALUMINUM
• Easy and fast mounting of disc by special made 5/8 -11center • Threaded plastic hub –5/8-11” • The best quality paper material

8. The superiority of Taipan Flap Discs:
• Long life
• Maximum benefit
• Maximum productivity
• Silent with vibration-free grinding
• No burning of parts during operation
• Suitable for
more than
one
application
• Economical:
avoid
frequent
disc
changing
Features: Taipan flap discs have high grinding capacity and long life.
In workshops flap discs increase the productivity during the grinding
application.
Our conical flap discs provide the productivity on grinding of the
edges in oblique angles without burn. They give maximum
performance with the help of their forms using their
bite to the limits.

9. Flap Discs • Original • Conical
TO-5002 4” x 5/8” 100mm x 16mm Zirconia #40 15,300 10 $4.48
TO-5004 4” x 5/8” 100mm x 16mm Zirconia #60 15,300 10 $4.48
TO-5006 4” x 5/8” 100mm x 16mm Zirconia #80 15,300 10 $4.48
TO-5008 4” x 5/8” 100mm x 16mm Zirconia #120 15,300 10 $4.48
TO-5010 4-1/2” x 7/8” 115mm x 22mm Zirconia #24 13,300 10 $4.65
TO-5012 4-1/2” x 7/8” 115mm x 22mm Zirconia #40 13,300 10 $4.65
TO-5014 4-1/2” x 7/8” 115mm x 22mm Zirconia #60 13,300 10 $4.65
TO-5016 4-1/2” x 7/8” 115mm x 22mm Zirconia #80 13,300 10 $4.65
TO-5018 4-1/2” x 7/8” 115mm x 22mm Zirconia #120 13,300 10 $4.65
TO-5020 5” x 7/8” 125mm x 22mm Zirconia #24 12,250 10 $5.32
TO-5022 5” x 7/8” 125mm x 22mm Zirconia #40 12,250 10 $5.32
TO-5024 5” x 7/8” 125mm x 22mm Zirconia #60 12,250 10 $5.32
TO-5026 5” x 7/8” 125mm x 22mm Zirconia #80 12,250 10 $5.32
TO-5028 5” x 7/8” 125mm x 22mm Zirconia #120 12,250 10 $5.32
TO-5030 6” x 7/8” 150mm x 22mm Zirconia #24 10,200 10 $8.65
TO-5032 6” x 7/8” 150mm x 22mm Zirconia #40 10,200 10 $8.65
TO-5034 6” x 7/8” 150mm x 22mm Zirconia #60 10,200 10 $8.65
TO-5036 6” x 7/8” 150mm x 22mm Zirconia #80 10,200 10 $8.65
TO-5038 6” x 7/8” 150mm x 22mm Zirconia #120 10,200 10 $8.65
TO-5040 7” x 7/8” 180mm x 22mm Zirconia #24 8,500 10 $10.65
TO-5042 7” x 7/8” 180mm x 22mm Zirconia #40 8,500 10 $10.65
TO-5044 7” x 7/8” 180mm x 22mm Zirconia #60 8,500 10 $10.65
TO-5046 7” x 7/8” 180mm x 22mm Zirconia #80 8,500 10 $10.65
TO-5048 7” x 7/8” 180mm x 22mm Zirconia #120 8,500 10 $10.65
PART# SIZE IN. SIZE MM GRAIN GRIT RPM QTY PRICE
ALUMINUMSTAINLESSSTEEL

10. Features:
These stringer bead wire wheel
brushes for angle grinders are
made from quality wire
that is knotted, and
each tuft is
precisely
positioned and
set for perfect
balance and
vibration-free
operation. Improved construction
ensures maximum operator safety and
fast material removal.
• Fast removal
• Perfect balance
• Vibration-free
• Best quality wire
• Ideal for pipeline
weld/bead
cleaning

11. TO-3602 Stringer Bead 5” 5/8-11” Thread Twist-Knot Stainless Steel 12,500 10 $30.07
TO-3604 Stringer Bead 6” 5/8-11” Thread Twist-Knot Stainless Steel 12,500 10 $45.19
PART# DESCRIPTION SIZE TYPE RPM QTY PRICE
Stainless Steel String Bead Brushes - 1/4” Face Width
STAINLESS
TO-3002 Stringer Bead 5” - 1/4” Face 5/8-11”Thread Twist-Knot Steel 12,500 10 $13.99
TO-3004 Stringer Bead 6” - 1/4” Face 5/8-11” Thread Twist-Knot Steel 12,500 10 $18.26
TO-3012 Knot Wheel 6” - 1/2” Face HD 5/8-11” Thread Twist-Knot Steel 12,500 10 $21.27
TO-3008 Knot Wheel 5” - 1/2” Face 5/8-11” Thread Twist-Knot Steel 12,500 10 $13.27
TO-3006 Knot Wheel 6” - 1/2” Face 5/8-11” Thread Twist-Knot Steel 12,500 10 $14.18
TO-3010 Knot Wheel 6”- 7/8” - 1/2” Face HD 5/8-11” Thread Twist-Knot Steel 12,500 10 $28.34
TO-3024 Cup Brush 2 - 3/4” 5/8-11” Thread Crimped Brass-Coated Steel 14,000 10 $6.55
TO-3022 Cup Brush 2 - 3/4” 5/8-11” Thread Twist-Knot Steel 14,000 10 $9.91
TO-3020 Cup Brush 3 - 1/2” 5/8-11” Thread Twist-Knot Steel 9,000 10 $13.41
TO-3018 Cup Brush 5” 5/8-11” Thread Twist-Knot Steel 9,000 10 $23.49
TO-3016 Cup Brush 6” 5/8-11” Thread Twist-Knot Steel 6,000 10 $33.42
PART# DESCRIPTION SIZE TYPE RPM QTY PRICE
Stringer Bead Brushes, Knot Twist Wheels & Cup Brushes
STEEL
TO-3028 Bevel/Saucer 4-1/2” - 45º Working Angle 5/8-11” Thread Twist-Knot Steel 12,500 1 $11.59
TO-3614 Bevel/Saucer 4-1/2” - 45º Working Angle 5/8-11” Thread Twist-Knot Stainless Steel 12,500 1 $21.67
TO-3014 Knot End 1-1/8” 1/4” Shaft Twist-Knot Steel 20,000 1 $7.90
TO-3606 Knot End 1-1/8” 1/4” Shaft Twist-Knot Stainless Steel 20,000 1 $15.62
PART# DESCRIPTION SIZE TYPE RPM QTY PRICE
Bevel/Saucer & Knot End Brushes
TO-3206 4-Row Yellow Handle Carbon Steel - Straight 0.35mm 12 120 $3.18
TO-3208 4-Row Yellow Handle Stainless Steel - Straight 0.35mm 12 120 $4.52
PART# ROW HANDLE COLOUR / WIRE TYPE PRICE
Hand Brushes CARTON
QTY
BOX
QTY
STAINLESSSTEEL
STAINLESSSTEEL

12. Date: __________________ P.O. #: ___________________
Distributor Sales Contact: ____________________________
SOLD TO: SHIP TO:
CUSTOMER CONTACT: DELIVERY BY:
TEL: FAX:
ETA:
TERMS:
QTY PART# DESCRIPTION UNIT AMOUNT
SUBTOTAL
S&H
SUBTOTAL
G.S.T.
TOTAL
SHIPPING INFO:
THANK YOU FOR YOUR ORDER!
TO-9204 Carbide Burr Set - 8 x burs - SA/SB/SC/SD/SE/SF/SG/SL - 3/8" head x 1/4" shank - For Steel $129.99
PLEASE QUOTE PROMO CODE TC1302
Offer valid April 1 to June 30, 2013