To add text labels to a drawing on a TI-Nspire CX calculator, open the text tool by pressing MENU and selecting Actions then Text. Place the cursor on a point of the drawing until it blinks, then click to open a text box and type the label. Continue this process to label multiple points on lines with letters until all labels are added, closing each text box with Enter.

1. Add Text or Labels
to a Drawing

2. DIRECTIONS FOR ACTIVITY 4
For this task, you will use the TI-Nspire CX to add a text label to a drawing.
To open the text tool:
Press [MENU]  Actions  Text

3. LABEL DRAWING
1. Move the cursor to a point on the line until it starts to blink and its name appears.
2. Press [CLICK] to open a text box.
3. Type A to label the line.
4. Press [ENTER] to close the text box.

4. MORE LABELING
1. Move the cursor to a different point on one of the lines until it starts to blink and its
name appears.
2. Press [CLICK] to open a text box.
3. Type B to label the line.
4. Continue this process until you have labeled A, B, C, and D.
5. Press [ENTER] to close the text box.

5. YOU HAVE
COMPLETED
ACTIVITY 4!