IIIE SECTION A ECONOMICS NOTES iiie section a notes
•Download as PPT, PDF•
0 likes•451 views
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive functioning. Exercise causes chemical changes in the brain that may help protect against developing mental illness and improve symptoms for those who already have a condition.
Report
Share
Report
Share
Recommended
IIIE SECTION A MANUFACTURING TECHNOLOGY NOTES : 10.CASTINGS AND ITS DEFECTS
Casting defects fall into five main categories: gas porosity, shrinkage defects, mold material defects, pouring metal defects, and metallurgical defects. Shrinkage defects occur when liquid metal shrinks as it solidifies and can leave pores or cavities. Gas porosity forms when dissolved gas comes out of solution during solidification. Pouring metal defects like cold shuts happen when liquid metal fronts do not fuse properly. Metallurgical defects include cracks from residual stresses or uneven cooling. Common defects in sand castings include erosion from too much mold strength, drops from improper ramming, and penetration from coarse sand. Inspections use visual, ultrasonic, x-ray, and mechanical tests to detect internal and external
IIIE SECTION A MANUFACTURING TECHNOLOGY NOTES 9.design for gating and rising
Risers are reservoirs built into casting molds to prevent cavities from shrinkage. They are located at the top of the casting and their volume is 25-55% of the casting. Riser design aims to overcome problems from uneven solidification like voids or stresses. The size and placement of risers depends on factors like the shape and freezing rate of the casting. Gating systems convey liquid material to molds, and their design controls shrinkage, flow speed, turbulence and traps dross. Gates are attached at thick parts to control shrinkage, and multiple gates may be needed for large castings.
IIIE SECTION A MANUFACTURING TECHNOLOGY NOTES 8.die castings
This document summarizes the die casting process used to produce metal castings. It discusses:
- Die casting forces molten metal into a mold cavity under high pressure (1500-25400 psi).
- Common materials used are zinc, aluminum, magnesium, copper, lead, and tin alloys.
- There are four main steps: die preparation, filling, ejection, and shakeout to separate scrap.
- Different types of die casting machines (hot chamber, cold chamber, vacuum) are used depending on the material and required pressure.
IIIE SECTION A MANUFACTURING TECHNOLOGY NOTES 7.centrifugal casting
Centrifugal casting involves pouring molten metal into a revolving mold, which uses centrifugal force to push the metal against the mold walls where it solidifies. This allows for the mass production of hollow cylindrical parts like pipes. There are three main types: true centrifugal casting produces perfectly cylindrical parts using a hollow, rotating mold; semi-centrifugal casting uses a core to form an inner surface while still utilizing centrifugal force; and centrifuged casting applies high fluid pressure to force molten metal into molds of complex, non-symmetrical shapes. Centrifugal casting provides dense, clean castings and eliminates the need for runners, risers, and cores, but is limited to annular parts and involves high initial
IIIE SECTION A MANUFACTURING TECHNOLOGY NOTES 6.investment casting
Investment casting, also known as lost-wax casting, is a process for producing metal parts with high dimensional accuracy and intricate details. It involves creating a wax pattern, coating it with ceramic slurry to create an outer mold, melting out the wax, and pouring molten metal into the empty mold cavity. The process allows for complex internal and external geometries without parting lines. Investment casting is well-suited for small, precision parts, especially those made of high-melting point alloys, and is used in industries like aerospace and firearms manufacturing.
IIIE SECTION A MANUFACTURING TECHNOLOGY NOTES 5.shell moulding.
Shell moulding is a casting technique used for mass production that provides a smooth finish. It was invented in Germany during World War 2 by Mr. J. Corning. The process uses thin resin-bonded sand shells that are clamped together to form a mould. Patterns are made of metal and heated before applying the sand mixture. Zircon or silica sand is used with thermosetting resin as the binder. The shells provide excellent surface finish and dimensional accuracy for casting thin sections. Some advantages are lower costs, less space and labor required, and flexibility in scheduling. However, it is more suited to larger production quantities due to high initial costs.
IIIE SECTION A MANUFACTURING TECHNOLOGY NOTES 4.melting,pouring,feeding,solid...
Virgin material, scrap, and alloying elements are melted in a furnace to produce molten metal. The melt is refined to remove impurities and its chemistry is adjusted before being tapped into a transport vessel. Molten metal is then poured into molds, which can be done by gravity, vacuum, or gas pressure. Modern foundries often use automatic machines while traditionally pouring was done by hand. When pouring, the molten metal must flow through the gating system and fill the mold cavity completely before solidifying. The pouring temperature and rate must be carefully controlled to avoid defects from turbulence or premature solidification.
IIIE SECTION A MANUFACTURING TECHNOLOGY NOTES 3.sand preparation and mould m...
Sand preparation and mould making involves using moulding sand composed mainly of silica to make moulds for casting metals. Natural sand collected from rivers and lakes can be used directly as green sand or processed further with binders like bentonite to make synthetic sand. Different sand properties like permeability, cohesiveness and plasticity are required for moulds. Common mould types include green sand, skin dry, and dry sand moulds made using natural moisture, partial drying, or no moisture respectively. Moulds are produced using bench, floor, plate, pit and machine moulding methods depending on the size and required production quantity of the casting.
Recommended
IIIE SECTION A MANUFACTURING TECHNOLOGY NOTES : 10.CASTINGS AND ITS DEFECTS
Casting defects fall into five main categories: gas porosity, shrinkage defects, mold material defects, pouring metal defects, and metallurgical defects. Shrinkage defects occur when liquid metal shrinks as it solidifies and can leave pores or cavities. Gas porosity forms when dissolved gas comes out of solution during solidification. Pouring metal defects like cold shuts happen when liquid metal fronts do not fuse properly. Metallurgical defects include cracks from residual stresses or uneven cooling. Common defects in sand castings include erosion from too much mold strength, drops from improper ramming, and penetration from coarse sand. Inspections use visual, ultrasonic, x-ray, and mechanical tests to detect internal and external
IIIE SECTION A MANUFACTURING TECHNOLOGY NOTES 9.design for gating and rising
Risers are reservoirs built into casting molds to prevent cavities from shrinkage. They are located at the top of the casting and their volume is 25-55% of the casting. Riser design aims to overcome problems from uneven solidification like voids or stresses. The size and placement of risers depends on factors like the shape and freezing rate of the casting. Gating systems convey liquid material to molds, and their design controls shrinkage, flow speed, turbulence and traps dross. Gates are attached at thick parts to control shrinkage, and multiple gates may be needed for large castings.
IIIE SECTION A MANUFACTURING TECHNOLOGY NOTES 8.die castings
This document summarizes the die casting process used to produce metal castings. It discusses:
- Die casting forces molten metal into a mold cavity under high pressure (1500-25400 psi).
- Common materials used are zinc, aluminum, magnesium, copper, lead, and tin alloys.
- There are four main steps: die preparation, filling, ejection, and shakeout to separate scrap.
- Different types of die casting machines (hot chamber, cold chamber, vacuum) are used depending on the material and required pressure.
IIIE SECTION A MANUFACTURING TECHNOLOGY NOTES 7.centrifugal casting
Centrifugal casting involves pouring molten metal into a revolving mold, which uses centrifugal force to push the metal against the mold walls where it solidifies. This allows for the mass production of hollow cylindrical parts like pipes. There are three main types: true centrifugal casting produces perfectly cylindrical parts using a hollow, rotating mold; semi-centrifugal casting uses a core to form an inner surface while still utilizing centrifugal force; and centrifuged casting applies high fluid pressure to force molten metal into molds of complex, non-symmetrical shapes. Centrifugal casting provides dense, clean castings and eliminates the need for runners, risers, and cores, but is limited to annular parts and involves high initial
IIIE SECTION A MANUFACTURING TECHNOLOGY NOTES 6.investment casting
Investment casting, also known as lost-wax casting, is a process for producing metal parts with high dimensional accuracy and intricate details. It involves creating a wax pattern, coating it with ceramic slurry to create an outer mold, melting out the wax, and pouring molten metal into the empty mold cavity. The process allows for complex internal and external geometries without parting lines. Investment casting is well-suited for small, precision parts, especially those made of high-melting point alloys, and is used in industries like aerospace and firearms manufacturing.
IIIE SECTION A MANUFACTURING TECHNOLOGY NOTES 5.shell moulding.
Shell moulding is a casting technique used for mass production that provides a smooth finish. It was invented in Germany during World War 2 by Mr. J. Corning. The process uses thin resin-bonded sand shells that are clamped together to form a mould. Patterns are made of metal and heated before applying the sand mixture. Zircon or silica sand is used with thermosetting resin as the binder. The shells provide excellent surface finish and dimensional accuracy for casting thin sections. Some advantages are lower costs, less space and labor required, and flexibility in scheduling. However, it is more suited to larger production quantities due to high initial costs.
IIIE SECTION A MANUFACTURING TECHNOLOGY NOTES 4.melting,pouring,feeding,solid...
Virgin material, scrap, and alloying elements are melted in a furnace to produce molten metal. The melt is refined to remove impurities and its chemistry is adjusted before being tapped into a transport vessel. Molten metal is then poured into molds, which can be done by gravity, vacuum, or gas pressure. Modern foundries often use automatic machines while traditionally pouring was done by hand. When pouring, the molten metal must flow through the gating system and fill the mold cavity completely before solidifying. The pouring temperature and rate must be carefully controlled to avoid defects from turbulence or premature solidification.
IIIE SECTION A MANUFACTURING TECHNOLOGY NOTES 3.sand preparation and mould m...
Sand preparation and mould making involves using moulding sand composed mainly of silica to make moulds for casting metals. Natural sand collected from rivers and lakes can be used directly as green sand or processed further with binders like bentonite to make synthetic sand. Different sand properties like permeability, cohesiveness and plasticity are required for moulds. Common mould types include green sand, skin dry, and dry sand moulds made using natural moisture, partial drying, or no moisture respectively. Moulds are produced using bench, floor, plate, pit and machine moulding methods depending on the size and required production quantity of the casting.
IIIE SECTION A MANUFACTURING TECHNOLOGY NOTES 2.core materilas and making
Cores are pre-shaped masses of sand that are made separately from molds. They are used to create internal cavities and surfaces in castings. Cores are made from refractory sand mixed with a binder, such as clay or synthetic resin. The mixture is packed into a core box and then baked to harden it. After baking, cores are strong enough to be handled and inserted into molds before metal pouring. Cores must be permeable, collapsible after solidification, thermally stable during casting, and strong enough to retain their shape during handling.
IIIE SECTION A ECONOMICS NOTES Publicandprivatesectorinindia 090522055926-ph...
This document discusses the public and private sectors in India. It provides information on:
1) The objectives and organization of the public sector, including providing infrastructure, promoting development, and setting prices.
2) Reasons for privatization in India including budget deficits, growth in private sectors abroad, and changes in other countries.
3) Key ways privatization has occurred in India including disinvestment, contracting, and permitting private sector entry.
4) Challenges to privatization like lack of political commitment and underdeveloped capital markets.
IIIE SECTION A ECONOMICS NOTES Principal problems of the public enterprises a...
The document discusses five principal problems faced by public enterprises in India: 1) Underutilization of capacity, as most public sector enterprises operate well below full capacity despite increases in output and value. 2) Undesirable bureaucratic interference that has replaced management by specialists and technocrats, leading to reduced efficiency, productivity and profitability. 3) Remuneration that is divorced from productivity, weakening the link between higher rewards and performance. 4) Stagnation in production in some vital industries despite large investments. 5) Incurring of losses, even though profit maximization is not the primary goal of public enterprises, they are still expected to operate efficiently and earn profits.
IIIE SECTION A ECONOMICS NOTES Ppf
The document discusses key economic concepts including the production possibility frontier (PPF), opportunity cost, comparative advantage, and absolute advantage. It explains that the PPF represents the most efficient allocation of resources and shows the tradeoffs between producing different goods. Opportunity cost is the value of the next best alternative forgone. Countries specialize in producing goods where they have a comparative advantage in order to benefit from trade. Absolute advantage occurs when a country can produce more of both goods than another country.
IIIE SECTION A ECONOMICS NOTES Monoploistic competition
This document provides an overview of monopolistic competition. It defines monopolistic competition as a market with many firms producing differentiated products, free entry and exit, and firms competing on quality, price, and marketing. It explains that in the short run, firms set price where marginal revenue equals marginal cost. In the long run, entry continues until firms earn zero economic profit. It also discusses how firms use product development, innovation, and advertising to maintain an advantage over competitors in monopolistically competitive markets.
IIIE SECTION A ECONOMICS NOTES Fundamentals of-aggregate-demand-and-aggregat...
The document outlines the aggregate demand and aggregate supply model. It discusses:
- The aggregate demand curve shows price-output combinations where goods and money markets are in equilibrium. It is derived from the IS-LM framework.
- Fiscal and monetary policies can shift the aggregate demand curve by impacting income, spending, and the money supply.
- The aggregate supply curve explains production and pricing. In the short-run it is upward sloping, but in the long-run other factors adjust and it is vertical.
- The intersection of aggregate demand and supply determines equilibrium output, employment, prices in the short-run. In the long-run, aggregate supply is the main determinant of economic growth
IIIE SECTION A ECONOMICS NOTES Economics question papers
Economics can be defined as the study of how societies allocate scarce resources to satisfy unlimited wants. It deals with production, distribution, and consumption of goods and services, as well as the transfer of wealth. As economics involves human behavior, it is considered a social science rather than an exact science. The main focus of economics is scarcity - the gap between limited resources and unlimited wants. Scarcity forces people and societies to make choices about how to use resources.
IIIE SECTION A ECONOMICS NOTES Economic development in india
Economic development in India followed socialist policies until the 1980s, when the country began opening up its markets through economic liberalization. Since 1991, India has made further reforms towards a free market economy. India's GDP growth has increased substantially in recent decades, reaching over 7.5% in the late 2000s, though concerns remain about poverty and malnutrition. The economy is driven by expansion of the services sector, which has grown faster than other sectors.
IIIE SECTION A ECONOMICS NOTES Down loads
Perfect competition is a theoretical market structure characterized by many small firms, homogeneous products, perfect information, and no barriers to entry or exit. Under perfect competition, no individual firm can influence the market price. In reality, few markets meet all the strict conditions of perfect competition. Monopolistic competition involves many firms selling differentiated products, while oligopoly describes a market dominated by a small number of interdependent firms.
IIIE SECTION A ECONOMICS NOTES Copy of monoploistic competition
Monopolistic competition is characterized by many firms producing differentiated products. Each firm faces a downward-sloping demand curve and competes through quality, price, and marketing. In the short run, firms set price where marginal revenue equals marginal cost. In the long run, free entry and exit causes firms to earn zero economic profit. Firms invest in product development and heavy advertising to differentiate their products and shift their demand curves, though this may result in excess capacity and prices above marginal cost.
IIIE SECTION A ECONOMICS NOTES A public limited company is an independent leg...
A public limited company is an independent legal entity with shareholders who have limited liability. It requires a minimum of two directors and can issue shares to the public that are traded on stock exchanges.
A private company is limited by shares and is usually smaller than a public company. Unlike a public company, it does not offer shares to the public or have its shares traded on exchanges. It can also be limited by guarantee where shareholders agree to cover company debts if it becomes insolvent.
A public limited company must comply with share capital requirements before starting business, such as having a quarter of the nominal share value paid upfront plus premiums. It is subject to more reporting standards than a private company since its shares can be publicly
IIIE SECTION A ECONOMICS NOTES : Unemployment in india
Unemployment in India is a major issue, with estimates of unemployed or underemployed Indians ranging from 70-100 million. This level of unemployment undermines India's development goals and has led to social and economic problems. While India's economy has grown recently, this growth has not generated enough jobs, and unemployment may be rising. The government has implemented various programs aimed at job creation, rural development, skills training, and entrepreneurship, but these efforts have faced challenges in addressing the enormous scale of unemployment in India. Expanding employment opportunities remains a critical priority for India's future.
Section a august 2012 (2)
This document contains an exam for Financial Accounting & Costing from the Indian Institution of Industrial Engineering. It includes 8 questions related to topics like:
1. A confectionary company mixing three types of toffees to maximize profit, determining the optimal mix.
2. Solving a transportation problem to find the optimal solution.
3. Solving an assignment problem to maximize sales.
4. Solving a game theory problem.
5. Determining the number of seats needed in a cafeteria to accommodate customers with a 95% probability based on arrival and service times.
6. Explaining methods for testing random numbers.
7. Writing short notes on principles of
Decision treeprimer 1
This document introduces decision tree analysis for addressing complex decisions involving uncertainty. It provides examples to illustrate key concepts.
1) A decision tree is used to represent a company's choice between developing two new products, accounting for the costs, potential revenues, and risks of failure for each option. 2) Probabilities of success or failure can be added to the tree, but do not necessarily make the best choice clear. 3) The concept of expected value is introduced as a decision-making criterion that considers outcomes and their probabilities.
Material handling
The document discusses the objectives and principles of efficient material handling systems. The main objectives are to reduce costs by decreasing inventory levels and waste while improving productivity, workflow, and worker conditions. Some key principles are to aggregate materials into standardized unit loads for transport, minimize movement distances, utilize a straight-line flow, and mechanized movement where possible to speed up transport. The selection of material handling equipment depends on factors like production volume and rates, product type, available space, and costs.
How to Predict Vendor Bill Product in Odoo 17
This slide will guide us through the process of predicting vendor bill products based on previous purchases from the vendor in Odoo 17.
skeleton System.pdf (skeleton system wow)
🔥🔥🔥🔥🔥🔥🔥🔥🔥
إضغ بين إيديكم من أقوى الملازم التي صممتها
ملزمة تشريح الجهاز الهيكلي (نظري 3)
💀💀💀💀💀💀💀💀💀💀
تتميز هذهِ الملزمة بعِدة مُميزات :
1- مُترجمة ترجمة تُناسب جميع المستويات
2- تحتوي على 78 رسم توضيحي لكل كلمة موجودة بالملزمة (لكل كلمة !!!!)
#فهم_ماكو_درخ
3- دقة الكتابة والصور عالية جداً جداً جداً
4- هُنالك بعض المعلومات تم توضيحها بشكل تفصيلي جداً (تُعتبر لدى الطالب أو الطالبة بإنها معلومات مُبهمة ومع ذلك تم توضيح هذهِ المعلومات المُبهمة بشكل تفصيلي جداً
5- الملزمة تشرح نفسها ب نفسها بس تكلك تعال اقراني
6- تحتوي الملزمة في اول سلايد على خارطة تتضمن جميع تفرُعات معلومات الجهاز الهيكلي المذكورة في هذهِ الملزمة
واخيراً هذهِ الملزمة حلالٌ عليكم وإتمنى منكم إن تدعولي بالخير والصحة والعافية فقط
كل التوفيق زملائي وزميلاتي ، زميلكم محمد الذهبي 💊💊
🔥🔥🔥🔥🔥🔥🔥🔥🔥
Stack Memory Organization of 8086 Microprocessor
The stack memory organization of 8086 microprocessor.
More Related Content
More from Bhaskar Nagarajan
IIIE SECTION A MANUFACTURING TECHNOLOGY NOTES 2.core materilas and making
Cores are pre-shaped masses of sand that are made separately from molds. They are used to create internal cavities and surfaces in castings. Cores are made from refractory sand mixed with a binder, such as clay or synthetic resin. The mixture is packed into a core box and then baked to harden it. After baking, cores are strong enough to be handled and inserted into molds before metal pouring. Cores must be permeable, collapsible after solidification, thermally stable during casting, and strong enough to retain their shape during handling.
IIIE SECTION A ECONOMICS NOTES Publicandprivatesectorinindia 090522055926-ph...
This document discusses the public and private sectors in India. It provides information on:
1) The objectives and organization of the public sector, including providing infrastructure, promoting development, and setting prices.
2) Reasons for privatization in India including budget deficits, growth in private sectors abroad, and changes in other countries.
3) Key ways privatization has occurred in India including disinvestment, contracting, and permitting private sector entry.
4) Challenges to privatization like lack of political commitment and underdeveloped capital markets.
IIIE SECTION A ECONOMICS NOTES Principal problems of the public enterprises a...
The document discusses five principal problems faced by public enterprises in India: 1) Underutilization of capacity, as most public sector enterprises operate well below full capacity despite increases in output and value. 2) Undesirable bureaucratic interference that has replaced management by specialists and technocrats, leading to reduced efficiency, productivity and profitability. 3) Remuneration that is divorced from productivity, weakening the link between higher rewards and performance. 4) Stagnation in production in some vital industries despite large investments. 5) Incurring of losses, even though profit maximization is not the primary goal of public enterprises, they are still expected to operate efficiently and earn profits.
IIIE SECTION A ECONOMICS NOTES Ppf
The document discusses key economic concepts including the production possibility frontier (PPF), opportunity cost, comparative advantage, and absolute advantage. It explains that the PPF represents the most efficient allocation of resources and shows the tradeoffs between producing different goods. Opportunity cost is the value of the next best alternative forgone. Countries specialize in producing goods where they have a comparative advantage in order to benefit from trade. Absolute advantage occurs when a country can produce more of both goods than another country.
IIIE SECTION A ECONOMICS NOTES Monoploistic competition
This document provides an overview of monopolistic competition. It defines monopolistic competition as a market with many firms producing differentiated products, free entry and exit, and firms competing on quality, price, and marketing. It explains that in the short run, firms set price where marginal revenue equals marginal cost. In the long run, entry continues until firms earn zero economic profit. It also discusses how firms use product development, innovation, and advertising to maintain an advantage over competitors in monopolistically competitive markets.
IIIE SECTION A ECONOMICS NOTES Fundamentals of-aggregate-demand-and-aggregat...
The document outlines the aggregate demand and aggregate supply model. It discusses:
- The aggregate demand curve shows price-output combinations where goods and money markets are in equilibrium. It is derived from the IS-LM framework.
- Fiscal and monetary policies can shift the aggregate demand curve by impacting income, spending, and the money supply.
- The aggregate supply curve explains production and pricing. In the short-run it is upward sloping, but in the long-run other factors adjust and it is vertical.
- The intersection of aggregate demand and supply determines equilibrium output, employment, prices in the short-run. In the long-run, aggregate supply is the main determinant of economic growth
IIIE SECTION A ECONOMICS NOTES Economics question papers
Economics can be defined as the study of how societies allocate scarce resources to satisfy unlimited wants. It deals with production, distribution, and consumption of goods and services, as well as the transfer of wealth. As economics involves human behavior, it is considered a social science rather than an exact science. The main focus of economics is scarcity - the gap between limited resources and unlimited wants. Scarcity forces people and societies to make choices about how to use resources.
IIIE SECTION A ECONOMICS NOTES Economic development in india
Economic development in India followed socialist policies until the 1980s, when the country began opening up its markets through economic liberalization. Since 1991, India has made further reforms towards a free market economy. India's GDP growth has increased substantially in recent decades, reaching over 7.5% in the late 2000s, though concerns remain about poverty and malnutrition. The economy is driven by expansion of the services sector, which has grown faster than other sectors.
IIIE SECTION A ECONOMICS NOTES Down loads
Perfect competition is a theoretical market structure characterized by many small firms, homogeneous products, perfect information, and no barriers to entry or exit. Under perfect competition, no individual firm can influence the market price. In reality, few markets meet all the strict conditions of perfect competition. Monopolistic competition involves many firms selling differentiated products, while oligopoly describes a market dominated by a small number of interdependent firms.
IIIE SECTION A ECONOMICS NOTES Copy of monoploistic competition
Monopolistic competition is characterized by many firms producing differentiated products. Each firm faces a downward-sloping demand curve and competes through quality, price, and marketing. In the short run, firms set price where marginal revenue equals marginal cost. In the long run, free entry and exit causes firms to earn zero economic profit. Firms invest in product development and heavy advertising to differentiate their products and shift their demand curves, though this may result in excess capacity and prices above marginal cost.
IIIE SECTION A ECONOMICS NOTES A public limited company is an independent leg...
A public limited company is an independent legal entity with shareholders who have limited liability. It requires a minimum of two directors and can issue shares to the public that are traded on stock exchanges.
A private company is limited by shares and is usually smaller than a public company. Unlike a public company, it does not offer shares to the public or have its shares traded on exchanges. It can also be limited by guarantee where shareholders agree to cover company debts if it becomes insolvent.
A public limited company must comply with share capital requirements before starting business, such as having a quarter of the nominal share value paid upfront plus premiums. It is subject to more reporting standards than a private company since its shares can be publicly
IIIE SECTION A ECONOMICS NOTES : Unemployment in india
Unemployment in India is a major issue, with estimates of unemployed or underemployed Indians ranging from 70-100 million. This level of unemployment undermines India's development goals and has led to social and economic problems. While India's economy has grown recently, this growth has not generated enough jobs, and unemployment may be rising. The government has implemented various programs aimed at job creation, rural development, skills training, and entrepreneurship, but these efforts have faced challenges in addressing the enormous scale of unemployment in India. Expanding employment opportunities remains a critical priority for India's future.
Section a august 2012 (2)
This document contains an exam for Financial Accounting & Costing from the Indian Institution of Industrial Engineering. It includes 8 questions related to topics like:
1. A confectionary company mixing three types of toffees to maximize profit, determining the optimal mix.
2. Solving a transportation problem to find the optimal solution.
3. Solving an assignment problem to maximize sales.
4. Solving a game theory problem.
5. Determining the number of seats needed in a cafeteria to accommodate customers with a 95% probability based on arrival and service times.
6. Explaining methods for testing random numbers.
7. Writing short notes on principles of
Decision treeprimer 1
This document introduces decision tree analysis for addressing complex decisions involving uncertainty. It provides examples to illustrate key concepts.
1) A decision tree is used to represent a company's choice between developing two new products, accounting for the costs, potential revenues, and risks of failure for each option. 2) Probabilities of success or failure can be added to the tree, but do not necessarily make the best choice clear. 3) The concept of expected value is introduced as a decision-making criterion that considers outcomes and their probabilities.
Material handling
The document discusses the objectives and principles of efficient material handling systems. The main objectives are to reduce costs by decreasing inventory levels and waste while improving productivity, workflow, and worker conditions. Some key principles are to aggregate materials into standardized unit loads for transport, minimize movement distances, utilize a straight-line flow, and mechanized movement where possible to speed up transport. The selection of material handling equipment depends on factors like production volume and rates, product type, available space, and costs.
More from Bhaskar Nagarajan (15)
IIIE SECTION A MANUFACTURING TECHNOLOGY NOTES 2.core materilas and making
IIIE SECTION A MANUFACTURING TECHNOLOGY NOTES 2.core materilas and making
IIIE SECTION A ECONOMICS NOTES Publicandprivatesectorinindia 090522055926-ph...
IIIE SECTION A ECONOMICS NOTES Publicandprivatesectorinindia 090522055926-ph...
IIIE SECTION A ECONOMICS NOTES Principal problems of the public enterprises a...
IIIE SECTION A ECONOMICS NOTES Principal problems of the public enterprises a...
IIIE SECTION A ECONOMICS NOTES Monoploistic competition
IIIE SECTION A ECONOMICS NOTES Monoploistic competition
IIIE SECTION A ECONOMICS NOTES Fundamentals of-aggregate-demand-and-aggregat...
IIIE SECTION A ECONOMICS NOTES Fundamentals of-aggregate-demand-and-aggregat...
IIIE SECTION A ECONOMICS NOTES Economics question papers
IIIE SECTION A ECONOMICS NOTES Economics question papers
IIIE SECTION A ECONOMICS NOTES Economic development in india
IIIE SECTION A ECONOMICS NOTES Economic development in india
IIIE SECTION A ECONOMICS NOTES Copy of monoploistic competition
IIIE SECTION A ECONOMICS NOTES Copy of monoploistic competition
IIIE SECTION A ECONOMICS NOTES A public limited company is an independent leg...
IIIE SECTION A ECONOMICS NOTES A public limited company is an independent leg...
IIIE SECTION A ECONOMICS NOTES : Unemployment in india
IIIE SECTION A ECONOMICS NOTES : Unemployment in india
Recently uploaded
How to Predict Vendor Bill Product in Odoo 17
This slide will guide us through the process of predicting vendor bill products based on previous purchases from the vendor in Odoo 17.
skeleton System.pdf (skeleton system wow)
🔥🔥🔥🔥🔥🔥🔥🔥🔥
إضغ بين إيديكم من أقوى الملازم التي صممتها
ملزمة تشريح الجهاز الهيكلي (نظري 3)
💀💀💀💀💀💀💀💀💀💀
تتميز هذهِ الملزمة بعِدة مُميزات :
1- مُترجمة ترجمة تُناسب جميع المستويات
2- تحتوي على 78 رسم توضيحي لكل كلمة موجودة بالملزمة (لكل كلمة !!!!)
#فهم_ماكو_درخ
3- دقة الكتابة والصور عالية جداً جداً جداً
4- هُنالك بعض المعلومات تم توضيحها بشكل تفصيلي جداً (تُعتبر لدى الطالب أو الطالبة بإنها معلومات مُبهمة ومع ذلك تم توضيح هذهِ المعلومات المُبهمة بشكل تفصيلي جداً
5- الملزمة تشرح نفسها ب نفسها بس تكلك تعال اقراني
6- تحتوي الملزمة في اول سلايد على خارطة تتضمن جميع تفرُعات معلومات الجهاز الهيكلي المذكورة في هذهِ الملزمة
واخيراً هذهِ الملزمة حلالٌ عليكم وإتمنى منكم إن تدعولي بالخير والصحة والعافية فقط
كل التوفيق زملائي وزميلاتي ، زميلكم محمد الذهبي 💊💊
🔥🔥🔥🔥🔥🔥🔥🔥🔥
Stack Memory Organization of 8086 Microprocessor
The stack memory organization of 8086 microprocessor.
Mule event processing models | MuleSoft Mysore Meetup #47
Mule event processing models | MuleSoft Mysore Meetup #47
Event Link:- https://meetups.mulesoft.com/events/details/mulesoft-mysore-presents-mule-event-processing-models/
Agenda
● What is event processing in MuleSoft?
● Types of event processing models in Mule 4
● Distinction between the reactive, parallel, blocking & non-blocking processing
For Upcoming Meetups Join Mysore Meetup Group - https://meetups.mulesoft.com/mysore/YouTube:- youtube.com/@mulesoftmysore
Mysore WhatsApp group:- https://chat.whatsapp.com/EhqtHtCC75vCAX7gaO842N
Speaker:-
Shivani Yasaswi - https://www.linkedin.com/in/shivaniyasaswi/
Organizers:-
Shubham Chaurasia - https://www.linkedin.com/in/shubhamchaurasia1/
Giridhar Meka - https://www.linkedin.com/in/giridharmeka
Priya Shaw - https://www.linkedin.com/in/priya-shaw
Chapter wise All Notes of First year Basic Civil Engineering.pptx
Chapter wise All Notes of First year Basic Civil Engineering
Syllabus
Chapter-1
Introduction to objective, scope and outcome the subject
Chapter 2
Introduction: Scope and Specialization of Civil Engineering, Role of civil Engineer in Society, Impact of infrastructural development on economy of country.
Chapter 3
Surveying: Object Principles & Types of Surveying; Site Plans, Plans & Maps; Scales & Unit of different Measurements.
Linear Measurements: Instruments used. Linear Measurement by Tape, Ranging out Survey Lines and overcoming Obstructions; Measurements on sloping ground; Tape corrections, conventional symbols. Angular Measurements: Instruments used; Introduction to Compass Surveying, Bearings and Longitude & Latitude of a Line, Introduction to total station.
Levelling: Instrument used Object of levelling, Methods of levelling in brief, and Contour maps.
Chapter 4
Buildings: Selection of site for Buildings, Layout of Building Plan, Types of buildings, Plinth area, carpet area, floor space index, Introduction to building byelaws, concept of sun light & ventilation. Components of Buildings & their functions, Basic concept of R.C.C., Introduction to types of foundation
Chapter 5
Transportation: Introduction to Transportation Engineering; Traffic and Road Safety: Types and Characteristics of Various Modes of Transportation; Various Road Traffic Signs, Causes of Accidents and Road Safety Measures.
Chapter 6
Environmental Engineering: Environmental Pollution, Environmental Acts and Regulations, Functional Concepts of Ecology, Basics of Species, Biodiversity, Ecosystem, Hydrological Cycle; Chemical Cycles: Carbon, Nitrogen & Phosphorus; Energy Flow in Ecosystems.
Water Pollution: Water Quality standards, Introduction to Treatment & Disposal of Waste Water. Reuse and Saving of Water, Rain Water Harvesting. Solid Waste Management: Classification of Solid Waste, Collection, Transportation and Disposal of Solid. Recycling of Solid Waste: Energy Recovery, Sanitary Landfill, On-Site Sanitation. Air & Noise Pollution: Primary and Secondary air pollutants, Harmful effects of Air Pollution, Control of Air Pollution. . Noise Pollution Harmful Effects of noise pollution, control of noise pollution, Global warming & Climate Change, Ozone depletion, Greenhouse effect
Text Books:
1. Palancharmy, Basic Civil Engineering, McGraw Hill publishers.
2. Satheesh Gopi, Basic Civil Engineering, Pearson Publishers.
3. Ketki Rangwala Dalal, Essentials of Civil Engineering, Charotar Publishing House.
4. BCP, Surveying volume 1
Temple of Asclepius in Thrace. Excavation results
The temple and the sanctuary around were dedicated to Asklepios Zmidrenus. This name has been known since 1875 when an inscription dedicated to him was discovered in Rome. The inscription is dated in 227 AD and was left by soldiers originating from the city of Philippopolis (modern Plovdiv).
HYPERTENSION - SLIDE SHARE PRESENTATION.
IT WILL BE HELPFULL FOR THE NUSING STUDENTS
IT FOCUSED ON MEDICAL MANAGEMENT AND NURSING MANAGEMENT.
HIGHLIGHTS ON HEALTH EDUCATION.
Wound healing PPT
This document provides an overview of wound healing, its functions, stages, mechanisms, factors affecting it, and complications.
A wound is a break in the integrity of the skin or tissues, which may be associated with disruption of the structure and function.
Healing is the body’s response to injury in an attempt to restore normal structure and functions.
Healing can occur in two ways: Regeneration and Repair
There are 4 phases of wound healing: hemostasis, inflammation, proliferation, and remodeling. This document also describes the mechanism of wound healing. Factors that affect healing include infection, uncontrolled diabetes, poor nutrition, age, anemia, the presence of foreign bodies, etc.
Complications of wound healing like infection, hyperpigmentation of scar, contractures, and keloid formation.
Elevate Your Nonprofit's Online Presence_ A Guide to Effective SEO Strategies...
Whether you're new to SEO or looking to refine your existing strategies, this webinar will provide you with actionable insights and practical tips to elevate your nonprofit's online presence.
A Visual Guide to 1 Samuel | A Tale of Two Hearts
These slides walk through the story of 1 Samuel. Samuel is the last judge of Israel. The people reject God and want a king. Saul is anointed as the first king, but he is not a good king. David, the shepherd boy is anointed and Saul is envious of him. David shows honor while Saul continues to self destruct.
Recently uploaded (20)
Mule event processing models | MuleSoft Mysore Meetup #47
Mule event processing models | MuleSoft Mysore Meetup #47
Chapter wise All Notes of First year Basic Civil Engineering.pptx
Chapter wise All Notes of First year Basic Civil Engineering.pptx
spot a liar (Haiqa 146).pptx Technical writhing and presentation skills
spot a liar (Haiqa 146).pptx Technical writhing and presentation skills
Elevate Your Nonprofit's Online Presence_ A Guide to Effective SEO Strategies...
Elevate Your Nonprofit's Online Presence_ A Guide to Effective SEO Strategies...
Juneteenth Freedom Day 2024 David Douglas School District
Juneteenth Freedom Day 2024 David Douglas School District