The document summarizes investigations into label bubbling issues that occurred with a contract packager's products in 2012 and again in 2016. Label trials were conducted both times that found bubbling occurred around logos and edges due to moisture exposure. Tests showed labels with extra coating were less prone to bubbling. A new face stock addressed the issue for several years until it reemerged in 2016 bottles, suggesting changes in environmental conditions impacted the labels' performance.
Blow molding is a manufacturing process that uses air pressure to form molten plastic into hollow shapes. It is commonly used to produce plastic bottles. The blow molding process involves heating plastic pellets, forming them into parisons, placing the parisons into molds, injecting air to push the plastic against the mold walls, and cooling the final product. Blow molding creates uniform, seamless parts and has lower tooling costs than injection molding. Custom blow molding allows companies to produce bottles with customized features like logos or colors. Streamline Plastics offers custom blow molding services for plastic containers and bottles.
Blow molding is a manufacturing process for forming and joining together hollow plastic parts. It is also used for forming glass bottles or other hollow shapes. In general, there are three main types of blow molding: extrusion blow molding, injection blow molding, and injection stretch blow molding.
The document discusses different plastic processing methods used by group members Muazz Ali and Irfan Ali. Muazz Ali focuses on injection molding, blow molding, and injection blow molding. Irfan Ali discusses extrusion blow molding, stretch blow molding, and thermoforming. Both members provide details on the basic principles, processes, parameters, advantages, disadvantages and applications of each plastic processing technique.
Blow Molding is defined appropriately and also the process compatible materials are listed. Blow Molding is broadly classified as - extrusion type, injection type, Multilayer type. All three processes are explained appropriately with diagrams and their application is also listed. Since every thing has advantages and disadvantages, so is the case with blow molding. References are also cited correctly. I hope you all find it useful
The document discusses Polyethylene terephthalate (PET), a type of polyester used to make plastic bottles and containers. PET is created through a poly-condensation reaction between terephthalic acid and ethylene glycol. There are different types of blow molding processes used to form PET bottles, with stretch blow molding being the most common. Stretch blow molding involves either a single-stage or two-stage process of injection molding a preform, reheating it, and then blowing compressed air inside to expand it against the mold and form the shaped bottle.
Presentation given at SPE section meeting held at Hennepin Technical College March 29, 2016. Covers why injection molding training is so important, best practices for injection molding training and case studies from Paulson injection molding customers and scientific molding training
Blow molding is a manufacturing process that uses air pressure to form hollow plastic parts like bottles. There are three main blow molding processes: extrusion blow molding where a tube of molten plastic (parison) is captured in a mold and inflated, injection blow molding where a preform is first injection molded and then blown, and stretch blow molding where preforms are first made via injection molding and then reheated and blown into shape. Blow molding can make parts from various plastics like PET, HDPE, and PP. It is used widely to make containers and bottles for foods, drinks, chemicals and more.
Blow molding is a manufacturing process that uses air pressure to form molten plastic into hollow shapes. It is commonly used to produce plastic bottles. The blow molding process involves heating plastic pellets, forming them into parisons, placing the parisons into molds, injecting air to push the plastic against the mold walls, and cooling the final product. Blow molding creates uniform, seamless parts and has lower tooling costs than injection molding. Custom blow molding allows companies to produce bottles with customized features like logos or colors. Streamline Plastics offers custom blow molding services for plastic containers and bottles.
Blow molding is a manufacturing process for forming and joining together hollow plastic parts. It is also used for forming glass bottles or other hollow shapes. In general, there are three main types of blow molding: extrusion blow molding, injection blow molding, and injection stretch blow molding.
The document discusses different plastic processing methods used by group members Muazz Ali and Irfan Ali. Muazz Ali focuses on injection molding, blow molding, and injection blow molding. Irfan Ali discusses extrusion blow molding, stretch blow molding, and thermoforming. Both members provide details on the basic principles, processes, parameters, advantages, disadvantages and applications of each plastic processing technique.
Blow Molding is defined appropriately and also the process compatible materials are listed. Blow Molding is broadly classified as - extrusion type, injection type, Multilayer type. All three processes are explained appropriately with diagrams and their application is also listed. Since every thing has advantages and disadvantages, so is the case with blow molding. References are also cited correctly. I hope you all find it useful
The document discusses Polyethylene terephthalate (PET), a type of polyester used to make plastic bottles and containers. PET is created through a poly-condensation reaction between terephthalic acid and ethylene glycol. There are different types of blow molding processes used to form PET bottles, with stretch blow molding being the most common. Stretch blow molding involves either a single-stage or two-stage process of injection molding a preform, reheating it, and then blowing compressed air inside to expand it against the mold and form the shaped bottle.
Presentation given at SPE section meeting held at Hennepin Technical College March 29, 2016. Covers why injection molding training is so important, best practices for injection molding training and case studies from Paulson injection molding customers and scientific molding training
Blow molding is a manufacturing process that uses air pressure to form hollow plastic parts like bottles. There are three main blow molding processes: extrusion blow molding where a tube of molten plastic (parison) is captured in a mold and inflated, injection blow molding where a preform is first injection molded and then blown, and stretch blow molding where preforms are first made via injection molding and then reheated and blown into shape. Blow molding can make parts from various plastics like PET, HDPE, and PP. It is used widely to make containers and bottles for foods, drinks, chemicals and more.
This document summarizes the history and operations of Termopol Polimer Sanayi ve Ticaret A.Ş., a Turkish manufacturer of thermoplastic elastomers (TPEs). Key milestones in the company's growth include becoming a Kraton Polymers distributor in 2001, starting TPE production in 2006, and expanding production capacity to 10,000 tons per year. The company serves customers in extrusion applications and exports 65% of its sales. It has ISO 9001 certification and FDA approval for some product lines.
The preservation of food by freezing has become a major industry.Preservation of a food by freezing occurs by several mechanisms. At
temperatures below 0°C there is a significant reduction in growth
rates for microorganisms and in the corresponding deterioration of
the product due to microbial activity.
Several freezing systems for food operate with direct contact between
the refrigerant and the product.
cryogenic freezer is direct contact freezer.
This document provides information about plastic injection molding processes. It begins with an overview of plastic products and mold types, including injection, blow, rotational, and extrusion molding. It then covers the product development process for injection molding, including mold design, machining, materials, defects, and design considerations. The document discusses the main components of injection molding machines and their functions. It also explains cooling systems, gate types, and ejection systems for molds. In summary, the document outlines the key steps and factors involved in plastic injection molding from design to production.
The document provides an overview of chemical plant operations including common unit processes and unit operations. It discusses key equipment used in chemical plants such as boilers, pumps, heat exchangers, valves, pipes, storage tanks and reactors. It also describes common unit operations like filtration, sedimentation, crystallization, drying, extraction, distillation, screening, and mixing.
This document summarizes the product line and technologies of BARRIER Water Filters. It offers:
1) A range of water pitchers, compact systems, and inline systems for tap water filtration in homes and businesses.
2) Five types of replacement cartridges that remove various contaminants like chlorine, iron, fluoride, and hardness.
3) Proprietary technologies like high-quality coconut activated carbon and ion-exchange resins that purify water efficiently.
4) An extensive product portfolio that leads the Russian market with the highest distribution and largest selection of SKUs.
methods of preparation of porous materialNimraRazzaq3
This document outlines 5 methods for preparing porous materials: space holder, replication, bubble generation, casting, and describes the space holder and replication methods in detail. The space holder method involves mixing metal powder with a space holder, compressing and sintering the mixture, then removing the space holder. The replication method coats a spongy material in slurry, then heats and sinters the mixture to obtain the final porous product.
Lyophilization, or freeze drying, is a process that removes water from a frozen product under vacuum conditions, allowing ice to change directly from solid to vapor without passing through the liquid phase. The process consists of three main steps - freezing, primary drying where ice sublimates under vacuum, and secondary drying to remove residual moisture. Lyophilization is useful for drying thermolabile compounds as it occurs at low temperatures, resulting in a stable dry powder that can be reconstituted for use.
How to save contacts to an iCloud account - for Apple usersJo Jensen
To save contacts to an iCloud account, go to Settings, click Contacts, then Accounts. Turn on Contacts for your iCloud account. Go back to Accounts and Contacts, select your iCloud account as the default so new contacts are automatically saved to iCloud.
El documento habla brevemente sobre creer en algo sin pruebas directas, formar hábitos a través de la repetición y disciplina, y disfrutar de la vida. También menciona visualizarse a uno mismo logrando metas y desprenderse de malos hábitos desconectándose de ellos.
Este documento describe la carrera de psicología. Explica que la psicología consiste en entender el comportamiento y pensamientos humanos para promover la salud mental y el bienestar de las personas. Un psicólogo es un profesional de la salud que se especializa en trastornos psicológicos causados por dificultades personales y de relación, más que por alteraciones neurológicas. Los psicólogos estudian el comportamiento humano a nivel individual, social y patológico para ayudar a las personas a comprender y control
The document is an introduction to a sermon on being "born again" or experiencing the "new birth." It poses a series of questions to the congregation about whether they are following the broad or narrow path, whether their lives demonstrate obedience to God's word, and whether they have truly repented of their sins and believed in Jesus. It indicates that being born again is necessary to enter God's kingdom, but is something that happens to people rather than something they can achieve through their own efforts. The sermon will address five points about the doctrine of regeneration or being born again.
We are the one stop solution for getting unsulphured dried apricots. The organization is specialized in producing-unsulfured, sun dried, dice apricots, organic, etc. Please visit to the online store for more information.
Este documento presenta información sobre el curso de geofísica. Explica la ley de Ohm, cómo se mide la resistividad en laboratorio, perforaciones y campo, y los diferentes dispositivos para medir la resistividad como el método de Wenner. También describe el sondaje eléctrico vertical para determinar la variación de resistividad con la profundidad. La clase finalizará con una práctica de campo para aplicar el método de sondaje eléctrico vertical e interpretar los resultados.
abs n. 7: 1. R. Villano “Foto. Volume 1”, carrellata di una selezione di circa 200 fotografie originali e inedite (realizzate dall'autore in oltre 30 anni), arricchita da riflessioni a tema e suggestive colonne sonore. (83,5 Mb; 6 files, 226 diapositive), Chiron dpt Ph@rma, Roma, dicembre 2014);
Lazy learning methods store training data and wait until test data is received to perform classification, taking less time to train but more time to predict. Eager learning methods construct a classification model during training. Lazy methods like k-nearest neighbors use a richer hypothesis space while eager methods commit to a single hypothesis. The k-nearest neighbor algorithm classifies new examples based on the labels of its k closest training examples. Case-based reasoning uses a symbolic case database for classification while genetic algorithms evolve rule populations through crossover and mutation to classify data.
IBM Bluemix Paris Meetup #21-20170131 Meetup @Ingima - MangOH to AirVantage t...IBM France Lab
This document summarizes a presentation given by Sierra Wireless on their mangOH open source hardware platform, AirVantage IoT cloud platform, and a demo connecting a sensor to the cloud using these technologies. The presentation introduced mangOH as a flexible open source hardware solution for prototyping IoT devices, AirVantage as an end-to-end cloud platform for managing devices and applications, and demonstrated a simple sensor-to-cloud application using mangOH, AirVantage and IBM Bluemix. Representatives from Sierra Wireless discussed their solutions for building the Internet of Things.
oVirt and OpenStack look kind of similar from a distance. But they cater to different use-cases. That said, they do have some common needs. How can they work together? And when is it better to use one over the other?
This document summarizes the history and operations of Termopol Polimer Sanayi ve Ticaret A.Ş., a Turkish manufacturer of thermoplastic elastomers (TPEs). Key milestones in the company's growth include becoming a Kraton Polymers distributor in 2001, starting TPE production in 2006, and expanding production capacity to 10,000 tons per year. The company serves customers in extrusion applications and exports 65% of its sales. It has ISO 9001 certification and FDA approval for some product lines.
The preservation of food by freezing has become a major industry.Preservation of a food by freezing occurs by several mechanisms. At
temperatures below 0°C there is a significant reduction in growth
rates for microorganisms and in the corresponding deterioration of
the product due to microbial activity.
Several freezing systems for food operate with direct contact between
the refrigerant and the product.
cryogenic freezer is direct contact freezer.
This document provides information about plastic injection molding processes. It begins with an overview of plastic products and mold types, including injection, blow, rotational, and extrusion molding. It then covers the product development process for injection molding, including mold design, machining, materials, defects, and design considerations. The document discusses the main components of injection molding machines and their functions. It also explains cooling systems, gate types, and ejection systems for molds. In summary, the document outlines the key steps and factors involved in plastic injection molding from design to production.
The document provides an overview of chemical plant operations including common unit processes and unit operations. It discusses key equipment used in chemical plants such as boilers, pumps, heat exchangers, valves, pipes, storage tanks and reactors. It also describes common unit operations like filtration, sedimentation, crystallization, drying, extraction, distillation, screening, and mixing.
This document summarizes the product line and technologies of BARRIER Water Filters. It offers:
1) A range of water pitchers, compact systems, and inline systems for tap water filtration in homes and businesses.
2) Five types of replacement cartridges that remove various contaminants like chlorine, iron, fluoride, and hardness.
3) Proprietary technologies like high-quality coconut activated carbon and ion-exchange resins that purify water efficiently.
4) An extensive product portfolio that leads the Russian market with the highest distribution and largest selection of SKUs.
methods of preparation of porous materialNimraRazzaq3
This document outlines 5 methods for preparing porous materials: space holder, replication, bubble generation, casting, and describes the space holder and replication methods in detail. The space holder method involves mixing metal powder with a space holder, compressing and sintering the mixture, then removing the space holder. The replication method coats a spongy material in slurry, then heats and sinters the mixture to obtain the final porous product.
Lyophilization, or freeze drying, is a process that removes water from a frozen product under vacuum conditions, allowing ice to change directly from solid to vapor without passing through the liquid phase. The process consists of three main steps - freezing, primary drying where ice sublimates under vacuum, and secondary drying to remove residual moisture. Lyophilization is useful for drying thermolabile compounds as it occurs at low temperatures, resulting in a stable dry powder that can be reconstituted for use.
How to save contacts to an iCloud account - for Apple usersJo Jensen
To save contacts to an iCloud account, go to Settings, click Contacts, then Accounts. Turn on Contacts for your iCloud account. Go back to Accounts and Contacts, select your iCloud account as the default so new contacts are automatically saved to iCloud.
El documento habla brevemente sobre creer en algo sin pruebas directas, formar hábitos a través de la repetición y disciplina, y disfrutar de la vida. También menciona visualizarse a uno mismo logrando metas y desprenderse de malos hábitos desconectándose de ellos.
Este documento describe la carrera de psicología. Explica que la psicología consiste en entender el comportamiento y pensamientos humanos para promover la salud mental y el bienestar de las personas. Un psicólogo es un profesional de la salud que se especializa en trastornos psicológicos causados por dificultades personales y de relación, más que por alteraciones neurológicas. Los psicólogos estudian el comportamiento humano a nivel individual, social y patológico para ayudar a las personas a comprender y control
The document is an introduction to a sermon on being "born again" or experiencing the "new birth." It poses a series of questions to the congregation about whether they are following the broad or narrow path, whether their lives demonstrate obedience to God's word, and whether they have truly repented of their sins and believed in Jesus. It indicates that being born again is necessary to enter God's kingdom, but is something that happens to people rather than something they can achieve through their own efforts. The sermon will address five points about the doctrine of regeneration or being born again.
We are the one stop solution for getting unsulphured dried apricots. The organization is specialized in producing-unsulfured, sun dried, dice apricots, organic, etc. Please visit to the online store for more information.
Este documento presenta información sobre el curso de geofísica. Explica la ley de Ohm, cómo se mide la resistividad en laboratorio, perforaciones y campo, y los diferentes dispositivos para medir la resistividad como el método de Wenner. También describe el sondaje eléctrico vertical para determinar la variación de resistividad con la profundidad. La clase finalizará con una práctica de campo para aplicar el método de sondaje eléctrico vertical e interpretar los resultados.
abs n. 7: 1. R. Villano “Foto. Volume 1”, carrellata di una selezione di circa 200 fotografie originali e inedite (realizzate dall'autore in oltre 30 anni), arricchita da riflessioni a tema e suggestive colonne sonore. (83,5 Mb; 6 files, 226 diapositive), Chiron dpt Ph@rma, Roma, dicembre 2014);
Lazy learning methods store training data and wait until test data is received to perform classification, taking less time to train but more time to predict. Eager learning methods construct a classification model during training. Lazy methods like k-nearest neighbors use a richer hypothesis space while eager methods commit to a single hypothesis. The k-nearest neighbor algorithm classifies new examples based on the labels of its k closest training examples. Case-based reasoning uses a symbolic case database for classification while genetic algorithms evolve rule populations through crossover and mutation to classify data.
IBM Bluemix Paris Meetup #21-20170131 Meetup @Ingima - MangOH to AirVantage t...IBM France Lab
This document summarizes a presentation given by Sierra Wireless on their mangOH open source hardware platform, AirVantage IoT cloud platform, and a demo connecting a sensor to the cloud using these technologies. The presentation introduced mangOH as a flexible open source hardware solution for prototyping IoT devices, AirVantage as an end-to-end cloud platform for managing devices and applications, and demonstrated a simple sensor-to-cloud application using mangOH, AirVantage and IBM Bluemix. Representatives from Sierra Wireless discussed their solutions for building the Internet of Things.
oVirt and OpenStack look kind of similar from a distance. But they cater to different use-cases. That said, they do have some common needs. How can they work together? And when is it better to use one over the other?
This document discusses different prepositions of place in English and provides examples of their usage. It covers prepositions like "at", "in", "under", "between", "behind", "on", "in front of", and "next to" followed by short phrases illustrating how each preposition is used to indicate spatial relationships and locations.
Floor Waste Requirements for Bathrooms in Australia
Waterproofing Melbourne and the entire construction industry must stay updated with the latest amendments to the Australian Standard AS3740 and the National Construction Code (NCC). Recent changes emphasize floor waste requirements and fall requirements in bathrooms, which are crucial for maintaining high standards of commercial waterproofing and other waterproofing practices.
Scope
The amendments clarify the waterproofing of wet areas within residential buildings across various states, including New South Wales, Queensland, and Western Australia. The NCC, a performance-based code, includes Volumes 1 and 2 (Building Code of Australia) and Volume 3 (Plumbing Code of Australia).
Legislation Overview
The NCC provides the minimum necessary standards for safety, health, sustainability, and amenity in building and plumbing legislation across Australia. It is divided into performance requirements and allows for compliance through Deemed-to-Satisfy Provisions or alternative solutions.
BCA Volume 1
F1.7 Waterproofing of Wet Areas: Ensures wet areas in buildings are adequately waterproofed to prevent damage and maintain safety.
F1.11 Floor Grading: In Class 2 or 3 buildings or Class 4 parts of a building, bathroom or laundry floors located above a sole occupancy unit or public space must be graded to prevent water spillage.
BCA Volume 2
Performance Requirement P2.4.1: Addresses waterproofing of wet areas in Class 1 and 10 buildings, specifying that these areas must meet specific performance criteria to ensure effective waterproofing.
Floor Waste and Grading Requirements
The NCC Volume 1 and 2, along with the Australian Standard, provide performance requirements for waterproofing elements in wet areas. However, the BCA Volume 2 does not mandate floor waste installation in Class 1 buildings, such as single dwelling houses, except for rooms with wall-hung urinals. The floor in these buildings does not need to be graded to a floor waste gully, even if one is present.
In contrast, Class 2, 3, or 4 buildings with bathrooms or laundries located above other sole occupancy units or public spaces require floor waste installations to prevent water from entering the spaces below. The floors in these areas must be graded to the floor waste.
Importance of Compliance
Compliance with these standards is critical for preventing waterproofing failures, which can lead to significant post-construction issues, including structural damage and health hazards. Ensuring proper waterproofing in areas like basement waterproofing, retaining wall waterproofing, and lift pit waterproofing is essential for the longevity and safety of buildings.
The Role of Training and Education
Paul Evans highlights the importance of ongoing training and education in the waterproofing industry. By staying informed about legislative changes and best practices, professionals can improve the quality of their work and reduce the risk of defects.
Comprehensive Guide to Balcony Waterproofing Repairs
Addressing Leaking Balconies, Roofs, and Rooftop Terraces
Leaking balconies, roofs, and rooftop terraces can cause catastrophic damage to structures below. Water leaks may cause not only aesthetic and superficial damage but can also compromise the structural integrity of the building envelope. If a failed waterproofing membrane is the cause, re-grouting or surface sealing is merely a temporary fix. Such band-aid methods will eventually fail, causing cracks in tiles, grout, and membranes as the balcony moves.
In many cases, failed membranes require a complete strip-off, structural repairs if needed, reinstallation of waterproofing, and a new finish surface. Key considerations in this process include the strength of the subfloor and screed, presence of substrate dips and hollows, correct balcony slope and fall, window and door frame installation, door threshold sealing, adequate drainage, and the potential for underlying pipe leaks. Existing tiling and expansion joints should also be assessed to determine their role in the balcony failure.
Waterproofing Preparation
Proper preparation is critical for any waterproofing membrane installation. The substrate must be clean, free of dirt and other contaminants. This involves vacuum cleaning and/or diamond grinding to ensure a smooth, dry, and debris-free surface. In some cases, washing the substrate may be necessary.
Waterproofing Detailing
Before installing a waterproofing system, construction features that interrupt the membrane layer must be adequately protected and sealed. This includes:
Perimeter Upturns: Attachment points for railings and balustrades, joints between horizontal and vertical surfaces, and structural and expansion joints. Sealant should be applied 15mm wide to all junctions, reinforced with polyester or fiberglass mat to a DFT of 1.2mm, 100mm above finished floor height, or 25mm above the water line. The membrane system should be installed 200mm onto balcony floor areas.
Door/Window Step Downs: Similar to perimeter upturns, apply sealant 15mm wide to all junctions, reinforced with fiberglass mat to a DFT of 1.2mm, ensuring the membrane system is installed 200mm onto balcony areas.
Drains & Floor Waste Details: All floor wastes should have a recessed leak control flange installed, primed with appropriate primer, and the membrane system installed as per specifications.
Waterproofing Installation: Australian Standards
The installation of a Class 2/3 waterproof membrane system to external concrete must comply with AS 4654.2. Key considerations for installation include:
Installation Conditions: Avoid installation in extreme temperatures (below 10°C or above 35°C) to prevent accelerated or decelerated cure times.
Type of Membrane: Use a flexible waterproofing membrane capable of withstanding normal cyclic fluctuations and ponding water.
CRH is committed to sustainability through its integrated approach to environmental, social, and governance practices. As a leading building materials company, CRH focuses on minimizing its environmental footprint, promoting social responsibility, and ensuring robust governance.
Visit Us : - https://www.crhrural.com/
How are Lilac French Bulldogs Beauty Charming the World and Capturing Hearts ...Lacey Max
After being the most listed dog breed in the United States for 31
years in a row, the Labrador Retriever has dropped to second place
in the American Kennel Club's annual survey of the country's most
popular canines. The French Bulldog is the new top dog in the
United States as of 2022. The stylish puppy has ascended the
rankings in rapid time despite having health concerns and limited
color choices.
Whatsapp Number: +923099554040
sim owner details
sim owner details pakistan
nadra sim owner details
sim owner details by number
sim owner details online
sim owner details apk
sim owner details app
sim owner details online check pakistan
pak sim data sim owner details
zong sim owner details
check sim owner details
how to check sim owner details in pakistan
find sim owner details in pakistan
mobile sim owner details
how to check sim owner details
sim card owner details
sim card owner details online
sim owner details with name and address
track sim card owner details online
jio sim owner details
sim owner details software
check sim card owner details
find sim owner details
how to check airtel sim owner details
how to check sim card owner details
how to find a sim owner details
how to find sim owner details
how to know sim card owner details
how to know sim owner details
idea sim card owner details online
sim card owner details app
sim card owner details software
sim owner name details
ufone sim owner details
00923456435194 sim owner detail
ap to know the sim owners details
check sim number owner details
find out details of owner of sim card
finding sim registration owner details
full details of sim card owner pakistan
how to check my sim owner details
how to check owner detail through sim
how to check owner details of a sim
how to check owner details of jaz sim
how to check sim owner details who tease people
how to check sim owner name and detail warid
how to chek owner details of sim
how to find a sim owner details pakista
how to find a sim owner details pakistan
how to find sim card owner details in pakistan
how to get details of others sim owner in pakistan
how to trace a sim owner details pakistan
idea sim card owner details
iran sim details of owner
iran sim details of owner website
mobile phone number details sim owner name address
mobile phone number details sim owner name address location
online sim owner details.pakistan
pakistan prepaid sim owner details
pakistan sim owner details
phone number details sim owner name address location
search sim card owner and details using apk
sim card owner details app for pakistan
sim detail check online owner
sim details online by number owner name
sim number all details with owner name
sim number all details with owner name id card
sim owner call details online
sim owner details by contact number
sim owner details online with name and address
sim owner name full details
ICS (Industrial Control System) Cybersecurity TrainingForensic Academy
ICS Cybersecurity training is intended for security professionals and control system designs in order to give them propelled cybersecurity aptitudes and learning in order to ensure the Industrial Control System (ICS) and keep their mechanical task condition secure against digital dangers.
Audience:
Control engineers, integrators and architects
System administrators, engineers
Information Technology (IT) professionals
Security Consultants
Managers who are responsible for ICS
Researchers and analysts working on ICS security
Vendors, Executives and managers
Information technology professionals, security engineers, security analysts, policy analysts
Investors and contractors
Technicians, operators, and maintenance personnel
The 5 Most Important Pipefitter Tools.pdfSchulteSupply
Equip yourself with the essential tools every pipefitter needs to tackle any job with confidence. "The 5 Most Important Pipefitter Tools" explores the must-have instruments that form the backbone of a pipefitter's toolkit. From pipe wrenches and tube cutters to threading machines and alignment clamps, this guide provides an in-depth look at the key tools that ensure precision and efficiency in every project. Learn about the functions, features, and benefits of each tool, along with expert tips on how to use them effectively.Whether you're a seasoned professional or an aspiring pipefitter, understanding these fundamental tools is crucial for success in the field. Discover how investing in the right equipment can enhance your craftsmanship and productivity in pipefitting tasks.
Waterproofing Changes in Victoria
The Building Act 1993 remains, but the Building Regulation 2006 will be replaced by the Building Regulations 2017, expected to be legislated around September. Key changes affecting the waterproofing industry include Part 13, which mandates inspection prior to covering a waterproofing membrane in any wet area.
The regulations remain consistent in other areas affecting waterproofing, such as the adoption of the NCC and relevant Australian Standards, methods of assessment of compliance, material testing, and compliance certificates.
The VBA confirms that only a registered Building Practitioner can authorize compliance of waterproofing works. Subcontractors who are not registered cannot authorize compliance. Although they can state that they have complied with the relevant standards, liability lies primarily with the registered builder, now shared with the Building Inspector or Surveyor for wet areas.
QBCC Tradie Tours
Waterproofing is consistently one of the most common defects reported to the QBCC, with mistakes being costly. In June 2017, the QBCC presented ten waterproofing seminars throughout Queensland, dedicated to waterproofing and tiling issues with a focus on preventing waterproofing defects. Approximately 1000 builders, waterproofers, certifiers, and tilers attended these seminars.
Bayset’s Training & Quality Manager, Frank Moebus, provided in-depth information about avoiding installation problems. The Tradie Tour received positive feedback from the industry.
Project Reference: Botanicca Corporate Park
Overview:
Property Type: Commercial
Project Type: Restoration
Scope: Leaking roof joints affecting company suites
Applicator: Australian Waterproofing Company Pty Ltd
Area: 1150m²
Category: Waterproofing
Products Used:
Soprema Soprasun 3.0S
Soprema Sopradhere Primer
Soprema Alsan Flashing
Soprema Roof Vents
Project Details:
Botanicca Corporate Park experienced leaks in the roof joints that affected various company suites and balconies. The building, constructed in 2006, required a watertight roof to ensure its longevity. A 20-year warranty was provided, and the Soprema Torch On system was applied to achieve a high-quality waterproofing result, both aesthetically and functionally.
Gary Moody, project manager, described the project as challenging but rewarding due to the successful outcome achieved by the experienced applicator.
Importance of Waterproofing Standards and Compliance
Legislative Changes and Their Impact
The introduction of the Building Regulations 2017 brings significant changes to the waterproofing industry, particularly regarding inspection and compliance requirements. For the first time, building inspectors or surveyors must inspect waterproofing membranes before they are covered in any wet areas. This change emphasizes the importance of thorough inspections to prevent defects and ensure high-quality waterproofing.
Foresic Academy. Information Security Company in Punjab (INDIA)Forensic Academy
Forensic Academy follows a broad vision of defending information from unauthorized access, use , disclosure,
disruption, modification, perusal, inspection, recording or destruction. The aim at Forensic Academy is to
provide information security solutions to clients with wide line-up of platforms: network, web application,
Android or IOS Application, Servers, Cloud and databases. Forensic Academy provides practical and interactive
training on Ethical hacking covering various subjects in information security and has structured customized
certification courses covering needs of newbies', students and corporate world- Forensic Academy aims to
cater to the need of all.
FORENSIC ACADEMY has a larger aim of expanding the IT Security which is not more that 10 years old in
INDIA. India has not more than 1000 cyber security experts which are quite less compared to the requirement
of more than 4 lakh experts. Increase in worldwide awareness in cyber security demands a growth in India
too.
The AIW Delivers on the Importance of Waterproofing
On March 29, 2017, the AIW attended and presented at the ADEB (Architects Designers Engineers Builders) Waterproofing Breakfast Seminar in Sydney. The focus was on addressing commercial waterproofing and residential high-rise waterproofing failures and solutions.
Presentations and Key Points
Paul Evans, AIW President, gave an overview of the AIW's role in raising waterproofing standards in Australia. Robert McDonald, an AIW member, delivered a session on the “Australian Standards in Waterproofing.” These presentations covered:
Common defects in internal and external waterproofing
Priming and substrate moisture content
Inspection and testing of waterproofing
Drainage and waterproofing techniques
Product knowledge and standards compliance, including:
CA 55 - 1970 (Design and Installation of Bituminous Fabric Roofing)
AS 3740 (Waterproofing Wet Areas in Residential Buildings)
AS 4858 - 2004 (Wet Area Membranes)
AS 4654 - 2012 (Waterproofing Membrane)
The AIW remains dedicated to updating, providing current information, and educational resources for all industries involved with waterproofing.
Achieving Uniform Waterproofing Compliance Nationally
Achieving uniform waterproofing compliance across Australia involves collaboration with State and Territory Regulatory Authorities, which play a crucial role. Current licensing requirements are often disjointed, and in many states, not mandatory.
Local authorities and building surveyors request Waterproofing Application Certificates to certify compliance with BCA and Australian Standards. These certificates must be issued by a competent person, whose work falls under the scope of their license or who has formal qualifications to carry out the work. Training and qualifications are regulated under the National Qualifications Framework.
Melbourne's premier landscape architect specializes in creating sustainable, innovative outdoor spaces. Renowned for blending natural beauty with functional design, they transform urban and residential areas into breathtaking landscapes. Their expertise spans gardens, parks, and public spaces, ensuring each project harmonizes with its surroundings while enhancing aesthetic appeal and usability.
Advancing Waterproofing Expertise with AIW
Waterproofing Melbourne and beyond, the Australian Institute of Waterproofing (AIW) is proud to introduce an innovative commercial waterproofing course. Developed in collaboration with the Master Builders Association Vic, this course, led by Andrew Golle, is tailored for project managers overseeing balcony waterproofing, roof waterproofing, and concrete repair. Paul Evans emphasizes the critical nature of these roles in preventing costly post-construction issues. Private sessions for building supervisors are now available, addressing common mistakes due to poor applications and cost-cutting measures.
The course covers essential topics, including product selection, surface preparation, and the importance of basement waterproofing. Paul Evans highlights the recurring problems seen in the industry, where inadequate training and oversight lead to significant issues, from retaining wall waterproofing to lift pit waterproofing.
In response to these challenges, the AIW is developing a "Below Ground Waterproofing Standard" specific to Australia, inspired by UK standards. Paul Evans calls for industry-wide collaboration to ensure the standard encompasses diverse methods and materials, ultimately enhancing the quality and longevity of waterproofing work.
By equipping supervisors and builders with the right knowledge, AIW aims to improve the overall standard of waterproofing practices, reducing the risk of failures and the subsequent mental and financial stress on homeowners. This proactive approach is crucial for the sustainability and reliability of waterproofing in construction projects across Australia.
Check CNIC Information | 03099554040 | CNIC Details Checkerownerdetailssim
Whatsapp Number For Paid Service:
03099554040
The CNIC Information System is a comprehensive database managed by the National Database and Registration Authority (NADRA) of Pakistan. It serves as the primary source of identification for Pakistani citizens and residents, containing vital information such as name, date of birth, address, and biometric data.
nadra cnic details
cnic details with picture
cnic details
how to check cnic details with picture
check cnic details
cnic details online
cnic number details
how to check cnic details
how to check cnic number details online
cnic detail by cnic number
how can i check my cnic details
nadra cnic detail check
number details with cnic
how to check cnic details online
cnic details with picture online
cnic sim details
check cnic details online
how can i check my cnic details online
how to check sim detail on cnic
how to check sim details on cnic
check cnic number details online in pakistan
cnic check details
cnic full detail
how can i check cnic details
my cnic details
pakistan cnic number details
cnic details finder
cnic details pakistan
how to check cnic details by mobile number
how to check nadra cnic details
online cnic details check
pakistani cnic details
sim cnic detail
sim details on cnic
check detail with cnic number
check mobilink sim number customer detail and cnic number
find cnic details
how to check cnic details pakistan
how to check my cnic details online
my cnic card details
bank account details by cnic number
check cnic number details
cnic details by number
cnic number sim detail
details through cnic number
how to check my cnic details
sim number details by cnic
cnic details with mother name
fbr cnic details
how to check father cnic number details online
mobile number cnic details online
cnic detail with cnic number
online check cnic detail
verify cnic details
check online cnic detail
cnic pic details
get details from cnic number
how can i check my cnic details through cnic number
how to find cnic details
how to find cnic number details
pakistan cnic details
pakistan cnic details online
check cnic detail by cnic number
check detail by cnic number
check sim details by cnic
cnic card details
details from cnic number
find details by cnic number
how to get details from cnic number
mobile number detail with name and cnic in pakistan
can i check my cnic details online
check cnic card details
check cnic details nadra
check cnic details pakistan
check cnic number details online
check cnic sim details
check details of cnic number
check my cnic details
check nadra cnic details
check nadra cnic full detail and print copy
check online cnic id card verification and detail bio data
check sim details on cnic
check your cnic details online
cnic code details
cnic details check online
cnic details online check
cnic details through sms
cnic details with father name
cnic details with mobile number
cnic details with name
cnic details with picture online pakistan
cnic no detail
cnic number check details
4. A day in the life
of a contract packager
Presentation by
Jamie Roehr
WPA
5. 5
Label Issue
• In January 2012 a customer
found labelled stock with
issues of lifting and bubbling
• Product bottled July/August
2011
Photo of bubbling seen on the labels in storage
6. 6
Let’s look at the circumstances in 2012
• The 4 SKUs were bottled on different dates on 2 different lines
• The lifting/bubbling was similar across all 4 SKUs
• All finished stock was held in customer warehouse
• Two different printers produced the labels for the 4 SKUs
7. 7
Label Trials
• Trials included:
• Two Printers
• Two Face stocks
• Label coatings:
Extra Coating
Standard Coating
Control Label
• Three tests were
performed
8. 8
RESULTS
• Bubbling occurred around the embossed logo on all labels
• Labels with extra coating showed less bubbling or no signs of
bubbling
• Control label displayed minimum bubbling
Test 1: Steam Test
• Sample bottles were taken from the line and left to stand for 24
hours – then held over steam for 30 seconds
9. 9
Test 2: Condensation Test
• Sample bottles were taken from the line and left to stand for 24
hours
• Bottles then refrigerated for 24 hours, removed and then
placed high humidity conditions
RESULTS
• All bubbling that occurred was around the embossed logo and
bottle seam
• Labels with extra coating showed less bubbling, or no signs of
bubbling
• Control label displayed minimum bubbling
10. 10
Test 3: Condensation Test
RESULTS
• Labels with standard coating showed very slight bubbling
• Labels with extra coating showed no bubbling
• 2nd face stock showed a slight bubble
• Control label showed slight bubbling
• Sample bottles were taken from the line and left to stand for 48
hours
• Bottles then refrigerated for 24 hours, removed and then placed
high humidity conditions
11. 11
• Best performing face stock selected for next vintage
• Label successfully applied for the following 4 years
Outcomes
12. 12
• August 2016 - same customer identified slight label edge lift and
bubbling from the production runs June & July 2016 across 4 SKUs
• Investigation commences
Fast forward to 2016 – Back to the Future!
13. 13
• All finished stock was held in a 3rd party warehouse
• The lifting and bubbling was similar across all 4 SKUs
• The 4 SKUs were bottled on different dates on 2
different lines which rules out application error
Let’s look at the circumstances
15. 15
RESULT
• Bubbling occurred around the edges of the label
Label Trial 2016 - Steam Test
• Label hand applied to bottles and left to stand
for 24 hours then held over steam for 30
seconds
16. 16
Label Trial 2016 - Condensation Test
• Labels hand applied and left to stand for 24 hours
• Bottles refrigerated for 24 hours and removed
RESULT
• Bubbling occurred around the edges of the label
17. 17
• We hand applied labels to
plate glass to compare
variations in adhesive
contact
Plate Glass Application Test
<NATHAN> Introduces David Hutton back onto the stage.
<DAVID>
In a contract packagers day there can be up to 20 individual customers’ brands being bottled and packaged at one site – all with their own individual dry goods.
.
.
<DAVID>
I’d like to begin by showing the fault logs captured in 2015 and compare it to 2016
Glass 55%
Labels 21%
Cartons 19%
Caps 5%
Wires .005%
Cork .002%
<DAVID>
We have seen:
A slight decline in glass faults to 44.8%
Slight increase in label issues 23.7%
Slight decrease in cartons 17.2%
Big increase in Capsule problems 135% increase to 11.7% , and a
250% jump in cork issues to 2.5%
-----------------
So, what we’ve done is put together a couple of actual scenarios on labels issues to give you a glimpse into the kind of investigative effort we put in when a label malfunctions
– is it application? Is it glass? Is it paper stock?
Without a doubt the focus is always on application error and it is from that point that we begin.
So I’d like to introduce Jamie Roehr and Peta Ingall to the stage.
<JAMIE>
Good afternoon. I have worked at Vinpac for the last 22 years beginning as a machine operator and then shift manager.
7 years ago I was given the incredible opportunity to be an apprentice to one of the packaging gurus of our time, Mr Peter Ridings.
The breadth of Peter’s experience and knowledge cannot be easily contained in a few short sentences.
Enough to say I have learned a great deal over the course of my time with him and I continue to learn and build my knowledge base everyday.
FYI - Peter retired earlier this year and is currently cruising in Europe instead of being here with us………
I have been involved with many trouble-shooting investigations where we are scrutinising the suitability and performance of dry goods on automated bottling lines across South Australia.
My presentation today is called “A Day in the life of contract packager” but let’s be realistic I’ve had to choose just one example to give – which is an overview of how a perceived small change can have such a huge impact on the finished product.
<JAMIE>
In January 2012 our customer found an issue with the front label on finished stock - lifting, bubbling/blistering.
We had bottled 4 skus using the same label size, paperstock and adhesive, so a cross section of all 4 was inspected at their warehouse and we found occurrences across all of them.
Samples of identified issues were taken back to our facility for further testing.
The QA data collected for these runs was checked for issues – with no anomalies found.
<JAMIE>
Let’s look at the circumstances
The 4 SKU’s were bottled on different dates on different bottling lines and all exhibited similar lifting and bubbling.
This shifted our thoughts away from an application issue as we were seeing the identical failure across all stock of the 4 SKU’s in question
Cool conditions – Finished goods were being stored in a 3rd party warehouse without climate control
2 different printers were used to produce the labels using the same face stock and adhesive combination
Note: Whilst the same facestock is used by both printers, there are some differences in the capabilities of both.
One printer has extra stations on their print press which provides the ability to apply extra processes and/or embellishments.
<JAMIE>
We approached the printers and paper suppliers and asked them to undertake trials and report, using their knowledge and expertise of the print and paper/adhesive processes.
The paper manufacturers came on board and investigations/testing concluded that the paperstock and adhesive were all within specification and moisture ingress appeared to be the cause of the lifting/bubbling.
Based on this outcome, the printers decided to conduct further tests – in total 7 trial labels were produced at two different printer sites to the same print specifications as those used in 2010.
All labels were then applied online and tested to identify the most robust option.
<JAMIE>
For the Vinpac Steam test, bottles are held over a boiling urn for 30 seconds and observed for moisture ingress.
Result: The steam swelled the paper fibres and lifted the edges of the label.
Unfortunately the original photographs taken from this test could not be sourced from the reporter.
<JAMIE>
Test performed 24hrs post application.
Bottles were then placed into fridge for 24 hours, removed and then placed into high humidity conditions using the printers’ standard condensation test
The labels with extra coating showed less bubbling or no signs of bubbling.
Other variants displayed bubbling around the embossed logo and bottle seam.
The “control” label displayed minimal bubbling.
<JAMIE>
The reason for 2 condensation tests was to verify that labels performance was similar after additional adhesion time
Trial labels with standard coating showed very slight bubbling
Trials with extra coating showed no bubbling
Control label with standard coating showed slight bubbling
<JAMIE>
Based on the trial results the best performing stock/varnish/ink combination was selected - this stock used on next print run in agreeance with all parties.
Issues not seen on next production run.
Customer happy with outcome.
Random checks of product in warehouse within 3 weeks of bottling showed no signs of lifting or bubbling.
Overall a total of 44 manhours and 120 line minutes were taken by Vinpac staff to help resolve this issue
<JAMIE>
Customer has identified slight edge lift on the labels from the production runs bottled in June & July 2016
<JAMIE>
All finished stock was held in 3rd party customer warehouse post bottling
Temperature estimate of 8-10 degrees inside. ?????
We had bottled 4 SKUs so a cross section of all 4 was inspected at 3rd party warehouse and we found occurrences across all of them.
In our opinion this rules out an application issue as we were seeing the similar failure across all stock of the 4 SKU’s
Samples were taken back to Vinpac for testing.
Production data from these runs was reviewed and no anomalies found.
In gathering our information on the 2014 vintage labels it was then we noticed that a different printer had produced them using a different paperstock and adhesive combination. ????
<JAMIE>
Here is an example of “Dry Labels” 3 weeks after application, before we revisit another round of testing.
Note the label has already started lifting slightly.
<JAMIE>
We completed our own testing methods:
Steam stress tests were carried out on all labelled bottles.
The test method involved holding bottles directly over boiling water and stressing the label to steam for 30 seconds.
Here we can see how the steam has swelled the paper fibres and lifted the edges of the label.
<JAMIE>
Here is the “Refrigerated Labels” before we revisit another round of testing.
This is the same bottle as the previous slide
Edge lifting is accentuated from being in the fridge.
<JAMIE>
The Adhesive contact with the glass was investigated further.
To do this, we hand applied labels from both the 2015 and 2016 bottlings to assess and compare the differences and variations in adhesive contact.
<JAMIE>
The plate glass test clearly shows the difference if the coverage of adhesive contact against the glass and we understand this is primarily due to the difference in liner – Glassine vs PET
<JAMIE>
During our label trial process we discovered that there was one point of difference between the bottling of 2015 and 2016 – there had been a change of label printer and face stock.
The customer, printer and Vinpac QA all attended the next bottling using the same labels.
The labeler application process and set up were observed and all present agreed that label finish quality was acceptable.
All labels assessed at the time of bottling were deemed to be free of lifting and bubbling.
Labelled samples were taken straight from the line and left for 24hrs in dry & warm conditions (office)
These samples were then placed into the refrigerator for 24hrs.
After 24hrs in the refrigerator lifting and bubbling were observed – results almost identical to initial trial results.
As of today this investigation is ongoing while all other factors are tested/investigated
In closing, I chose this example to highlight how one change can have such an detrimental effect on label application.
As a contract packager we are the last link in the supply chain – and when the end result doesn’t meet the expectations of the customer it seems that application is the strong suspect.
Yes there can be other influences such as glass sink and bulge, cold end coating, label too big for the label panel.
But together we can use our different knowledge and expertise in our given fields to set benchmark tests and specifications that provide our customers and their designers with the tools and information they need to make the best decisions for their brands.
<NATHAN>
Question Time
You have 10 minutes to forward either an email or txt of q question you would like raised at the Q&A Session this afternoon
Please insert WINE PACKAGERS into the subject line