5 Tips To Ensure Safety At Your Automotive Workplace
•Download as PPTX, PDF•
2 likes•238 views
Safety is extremely important in the automotive industry because mechanics work with lifts, tools, and chemicals that are potentially dangerous. And accidents can cost lives. Incorporating safety equipment, practices and disciplines in your workplace will keep you, your employees, and your visitors safe.
Report
Share
Report
Share
Recommended
Machine Safety - April 2015
Machine Safety - This presentation covers basic #machinesafety in the work environment and some of the ways to protect staff and visitors from harm.
MOVUS Mining Case Study
This MOVUS Mining Customer Saved $1.7m of Lost Production using our Continuous Condition Monitoring Solution.
CSF Proteins - Case Study
CSF Proteins has experienced zero unplanned outages in less than 12 months adopting predictive maintenance
8 Ways to Improve On-the-Job Safety for Metal Fabrication Workers
Implementing stringent safety policies and training employees on safety practices can help reduce injuries for metal fabrication workers. Key things include offering safety training, providing protective gear, keeping work areas clear of obstructions, conducting equipment inspections, using incentives to encourage safe behaviors, having employees report all incidents, prioritizing efficiency while maintaining safety, and integrating safety into all business operations. The goal is for employees to leave work in the same condition they arrived in terms of health and safety.
Punctuality at work
PUNCTUALITY AT WORK
The issue of TIMELINESS perhaps you think that is not related to the prevention of accidents. However, although this ratio is not too lean and there indirectly.
PUNCTUALITY AT WORK
Visit in Youtube the channel INDUSTRIAL SECURITY
Australian Water Utility
This case study shows how a water utility early detect an error in their bearing and saved millions of dollars in maintenance cost using FitMachine
Intelligent pneumatic-bumber-to-reduce-collion-effect
This document summarizes a project to develop an automatic impact reducing system for vehicles using pneumatic bumpers. The system uses infrared sensors to detect when a vehicle is approaching too closely, which then activates a solenoid valve to direct compressed air to a cylinder. This causes the pneumatic bumper to deploy, increasing the crash distance and improving safety. The goals are to ensure timely braking, increase crash distances, improve pre-crash safety, enhance external vehicle protection, decrease passenger injuries, and reduce the need for internal airbags.
Management of Port Equipment
The document discusses the management of port equipment. It outlines several goals of effective equipment management, including minimizing costs, increasing efficiency and safety. There are different models of equipment ownership - ports can fully own equipment, partly own via leasing, or hire from external companies. Key aspects of management include maintenance through preventative, predictive, corrective and proactive strategies. Inspections also help maximize the lifespan of expensive equipment. Ensuring resource use and operational safety are important objectives of best practice port equipment management.
Recommended
Machine Safety - April 2015
Machine Safety - This presentation covers basic #machinesafety in the work environment and some of the ways to protect staff and visitors from harm.
MOVUS Mining Case Study
This MOVUS Mining Customer Saved $1.7m of Lost Production using our Continuous Condition Monitoring Solution.
CSF Proteins - Case Study
CSF Proteins has experienced zero unplanned outages in less than 12 months adopting predictive maintenance
8 Ways to Improve On-the-Job Safety for Metal Fabrication Workers
Implementing stringent safety policies and training employees on safety practices can help reduce injuries for metal fabrication workers. Key things include offering safety training, providing protective gear, keeping work areas clear of obstructions, conducting equipment inspections, using incentives to encourage safe behaviors, having employees report all incidents, prioritizing efficiency while maintaining safety, and integrating safety into all business operations. The goal is for employees to leave work in the same condition they arrived in terms of health and safety.
Punctuality at work
PUNCTUALITY AT WORK
The issue of TIMELINESS perhaps you think that is not related to the prevention of accidents. However, although this ratio is not too lean and there indirectly.
PUNCTUALITY AT WORK
Visit in Youtube the channel INDUSTRIAL SECURITY
Australian Water Utility
This case study shows how a water utility early detect an error in their bearing and saved millions of dollars in maintenance cost using FitMachine
Intelligent pneumatic-bumber-to-reduce-collion-effect
This document summarizes a project to develop an automatic impact reducing system for vehicles using pneumatic bumpers. The system uses infrared sensors to detect when a vehicle is approaching too closely, which then activates a solenoid valve to direct compressed air to a cylinder. This causes the pneumatic bumper to deploy, increasing the crash distance and improving safety. The goals are to ensure timely braking, increase crash distances, improve pre-crash safety, enhance external vehicle protection, decrease passenger injuries, and reduce the need for internal airbags.
Management of Port Equipment
The document discusses the management of port equipment. It outlines several goals of effective equipment management, including minimizing costs, increasing efficiency and safety. There are different models of equipment ownership - ports can fully own equipment, partly own via leasing, or hire from external companies. Key aspects of management include maintenance through preventative, predictive, corrective and proactive strategies. Inspections also help maximize the lifespan of expensive equipment. Ensuring resource use and operational safety are important objectives of best practice port equipment management.
PSR - LOLER
The Lifting Operations and Lifting Equipment Regulations (LOLER) require that lifting equipment used for work at height, such as cherry pickers and scissor lifts, undergo thorough inspection every six months to ensure it is safe. These inspections must be documented and defects addressed. PSR offers thorough inspections and repair services performed by qualified engineers to help customers comply with LOLER.
Top 10 security guard job website
The document lists the top 10 websites to apply for security guard jobs, including eurojobs.com, eurograduate.com, Europa.eu, Jobs.telegraph.co.uk, Stepstone, iAgora, Executives, Jobsite, and Learn 4 Good. It encourages visiting Securityguardsuae.com for more information on finding security guard positions.
Sydney trains failure to uphold protection arrangements
1. The document discusses a near miss incident at a train station where a work group conducting track measurements lost sight of their lookout. The lookout then saw an approaching train and sounded their warning device, but the work group was only alerted by the train's whistle as it applied its emergency brake.
2. The network rules and procedures clearly state that lookouts must maintain sight and hearing of the work group, and if sight is lost then work must stop until sight is reestablished. In this case, the protection arrangements failed as the lookout lost sight of the work group.
3. The document emphasizes that lookout working should only be used as a last resort, and if used then the implementation arrangements
Warehouse safety
OSHA issues top 10 citations for warehouse safety violations. These include forklifts, hazard communication, electrical wiring and systems, guarding floor and wall openings, exits, mechanical power transmission, respiratory protection, lockout/tagout, and portable fire extinguishers. The document provides guidance on safety practices for each area to ensure worker protection and compliance with regulations.
Safety Moment - Personal Protection Equipment
Halliburton promotes safety rules for properly maintaining personal protection equipment (PPE). The document outlines that before using any PPE, employees should identify potential hazards, properly maintain all equipment, and inspect each piece to ensure it is ready. Halliburton stresses that safety precautions begin with taking care of PPE, as equipment cannot protect workers if it is not properly maintained.
Eric Banwon CV
The document provides information about Eric Banwon who is applying for the position of Occupational Health & Safety Officer. It includes his contact information, educational background which includes various safety related certificates obtained between 2005-2014, and his job experience as a Safety Officer at ArcelorMittal Iron Ore Mining from 2011-2015. It also lists 20 duties and responsibilities of the role and provides two references from his current employer ArcelorMittal Iron Ore Mining.
Control of Contractors on Site - Aug 2016
Dave Bennion - "Control of Contractors on Site" is a basic presentation outlining some of the measures to ensure your site operates safe when contractors our about. It is about the contractors operating safety, appropriate supervision and protecting the companies workers from contractor actions.
Csi 2015 js
This document provides a summary of health, safety, and environmental standards and certifications achieved by ONWJ CSI in 2014-2015. It notes that in 2014, ONWJ CSI received ISO 50001 certification for energy management, ISO 14001 certification for facilities management, and OHSAS 18001 certification for several facilities. It also received awards from government organizations for its HSE performance and commitment to using alternative fuels. Statistics on total recordable incident rate and safe man hours worked are provided for 2006-2014. Three recordable incidents that occurred in 2015 are described. The document proposes commitments to improve safety, such as recognizing hazards, increasing safety observation and supervision, and not underestimating risk.
Toyota
Toyota Motor Corporation is a Japanese automotive manufacturer headquartered in Aichi, Japan. It was founded in 1937 and is the world's 14th largest company by revenue. Toyota is known for its Toyota Production System which focuses on just-in-time inventory management and the prevention of defects. Toyota produces a range of vehicles and also focuses on developing advanced robotics and fuel cell and electric vehicle technology to further its mission of building more sustainable and environmentally friendly cars.
Exp Engineering Automotive
Experis is a large professional staffing firm that provides high-performance engineering talent and solutions to the automotive industry. It has approximately 1,000 staff employees and places over 12,000 consultants annually in North America through its 100+ offices. Experis recruits for a wide range of automotive engineering positions and delivers candidates quickly through its established networks and recruiting expertise. It offers a full spectrum of resourcing solutions, from providing individual contractors to managing entire project outsourcing engagements. Experis leverages the global scale and financial stability of its parent company, ManpowerGroup, to reliably serve major automotive clients.
Introduction to Automotive Safety and Assessment Engineering Program at TGGS-...
The document discusses the Automotive Safety and Assessment Engineering (ASAE) program at the King Mongkut's University of Technology North Bangkok. It provides an overview of the program's history, research focus areas including vehicle safety, pedestrian safety, and motorcycle safety. It also outlines the program's course curriculum, research activities involving crash tests, simulations, and collaboration with international universities. The ASAE program aims to develop testing protocols and safety standards while researching injury mechanisms to improve vehicle and traffic safety.
Introduction to Automotive Safety
This document discusses the history of automotive safety and accidents. It covers some of the earliest automobile accidents in the late 1800s that resulted in injuries and fatalities. It then discusses the UN Decade of Road Safety from 2010-2020 and the "6 E's of Road Safety": education, enforcement, engineering, environment, enactment, and emergency response. Finally, it covers different automotive safety systems, dividing them into active safety systems that help prevent crashes and passive safety systems that help protect occupants during a crash.
Vehicle safety system
The document discusses various automobile safety systems such as ABS, collision warning systems, sturdy body cells, electronic stability control, blind spot detectors, survival cells, air bags, and seat belts. It provides details on how each system works, such as how ABS uses speed sensors and valves to allow wheels to maintain contact during braking. Safety is important for automakers and special departments work to improve safety. While safety systems help, following safe driving practices like wearing seat belts and avoiding speeding is also important for preventing accidents and injuries.
Automobile Ppt
The automobile industry in India has grown significantly over the past few decades. It began with only two major players and licensed manufacturing in the initial years. In the 1980s, more companies entered the market and government support increased. In the 1990s, delicensing led to more players and easier financing, creating a buyers market. Domestic sales and exports have grown strongly in recent years, with India now among the top global markets. Motorcycles dominate two-wheeler sales while passenger vehicles lead exports. Key players hold major shares in different vehicle segments. The industry faces challenges around infrastructure and customer expectations but benefits from favorable demographics and policy support focused on areas like product development, manufacturing, and supply chains.
Pre-Operatoin Forklift Inspections: Why They MAtter and What to Check
Forklifts are a common sight in many industries. Whether used in warehouses, retail
applications or elsewhere, these vehicles are crucial tools in the daily operations of many
businesses. Because of this frequent level of use, however, many operators and nearby
pedestrians become complacent regarding safety protocols. This complacency can have many
ill effects, including asset damage, employee discipline, fines, injury, and even death.
Fork Lift Truck Association Safety 4MOST
The document discusses safety practices for operating forklift trucks. It addresses safety responsibilities for four areas:
1. Management safety - Managers are ultimately responsible for safety and must ensure proper training, equipment, and risk assessment.
2. Operator safety - Operators must respect equipment, follow training, and look out for others. Common unsafe practices like not wearing seatbelts are addressed.
3. Site safety - Sites should be designed, maintained, and have a culture that promotes safety. Hazards should be promptly addressed.
4. Truck safety - Proper trucks must be selected for the job and location. Regular maintenance and inspections are vital to ensure truck safety.
It Maintenance for TVT collage (Horaizone)
The document provides guidance on developing and implementing proper maintenance procedures for computer hardware and software. It outlines types of maintenance like preventative and corrective maintenance. Safety rules and general safety practices are discussed. Steps for documenting procedures, orienting staff, and ensuring adherence to maintenance schedules while observing occupational health and safety are presented. Maintaining equipment in good working order through organized maintenance activities is important.
5 Tips for Maintaining Overall Waste Fleet Health
Whether you have 1 truck or 1,000, it is critical to properly maintain your fleet. Waste handling companies can reduce costs when their fleet is up and running under an effective PMI program.
10 safety mistakes hotel managers make
The document outlines 10 safety mistakes that hotel managers commonly make and how to avoid them. These mistakes include cutting back on security personnel, not having evacuation routes posted in meeting rooms, insufficient lighting on the property, lack of employee training programs, non-compliance with OSHA standards, storing backup data on-site, not installing phones in fitness centers, failing to perform background checks on employees, not regularly checking detection devices, and not periodically inspecting emergency equipment. The author recommends implementing preventative safety measures to protect guests, employees, and the business.
AUTOMOTIVE SERVICING.pptx
The document provides information about an automotive servicing training program. It teaches the basic skills required for diagnosis, maintenance, and repair of passenger cars and light trucks. It identifies exterior parts of a vehicle's body from a picture and discusses factors to consider when planning and preparing for automotive repair tasks, such as having the proper workplace, materials, tools, safety procedures, and waste disposal. It stresses the importance of using tools that are in good condition and suitable for the job.
Planned preventive maintenance report
This document discusses planned preventive maintenance techniques. It divides maintenance activities into cleaning (C), oiling (O), and tightening (T). It recommends scheduling preventive maintenance tasks on a regular weekly basis. Key aspects of preventive maintenance include using computerized systems to generate and schedule tasks, focusing on operational efficiency, performance, safety, and cost reduction. Total productive maintenance (TPM) aims for zero breakdowns or defects by making all staff responsible for equipment. It utilizes techniques like autonomous maintenance, predictive analysis, and categorizing parts by importance.
Four steps to an audit proof measurement system by PQ Systems
Cuatro pasos para lograr un sistema de medición a "prueba de balas".
Mejore sus sistema de medición, asegure su calidad.
Gracias a PQ Systems, aliado de Blackberry&Cross desde 2006.
Más información: http://www.blackberycross.com
More Related Content
What's hot
PSR - LOLER
The Lifting Operations and Lifting Equipment Regulations (LOLER) require that lifting equipment used for work at height, such as cherry pickers and scissor lifts, undergo thorough inspection every six months to ensure it is safe. These inspections must be documented and defects addressed. PSR offers thorough inspections and repair services performed by qualified engineers to help customers comply with LOLER.
Top 10 security guard job website
The document lists the top 10 websites to apply for security guard jobs, including eurojobs.com, eurograduate.com, Europa.eu, Jobs.telegraph.co.uk, Stepstone, iAgora, Executives, Jobsite, and Learn 4 Good. It encourages visiting Securityguardsuae.com for more information on finding security guard positions.
Sydney trains failure to uphold protection arrangements
1. The document discusses a near miss incident at a train station where a work group conducting track measurements lost sight of their lookout. The lookout then saw an approaching train and sounded their warning device, but the work group was only alerted by the train's whistle as it applied its emergency brake.
2. The network rules and procedures clearly state that lookouts must maintain sight and hearing of the work group, and if sight is lost then work must stop until sight is reestablished. In this case, the protection arrangements failed as the lookout lost sight of the work group.
3. The document emphasizes that lookout working should only be used as a last resort, and if used then the implementation arrangements
Warehouse safety
OSHA issues top 10 citations for warehouse safety violations. These include forklifts, hazard communication, electrical wiring and systems, guarding floor and wall openings, exits, mechanical power transmission, respiratory protection, lockout/tagout, and portable fire extinguishers. The document provides guidance on safety practices for each area to ensure worker protection and compliance with regulations.
Safety Moment - Personal Protection Equipment
Halliburton promotes safety rules for properly maintaining personal protection equipment (PPE). The document outlines that before using any PPE, employees should identify potential hazards, properly maintain all equipment, and inspect each piece to ensure it is ready. Halliburton stresses that safety precautions begin with taking care of PPE, as equipment cannot protect workers if it is not properly maintained.
Eric Banwon CV
The document provides information about Eric Banwon who is applying for the position of Occupational Health & Safety Officer. It includes his contact information, educational background which includes various safety related certificates obtained between 2005-2014, and his job experience as a Safety Officer at ArcelorMittal Iron Ore Mining from 2011-2015. It also lists 20 duties and responsibilities of the role and provides two references from his current employer ArcelorMittal Iron Ore Mining.
Control of Contractors on Site - Aug 2016
Dave Bennion - "Control of Contractors on Site" is a basic presentation outlining some of the measures to ensure your site operates safe when contractors our about. It is about the contractors operating safety, appropriate supervision and protecting the companies workers from contractor actions.
Csi 2015 js
This document provides a summary of health, safety, and environmental standards and certifications achieved by ONWJ CSI in 2014-2015. It notes that in 2014, ONWJ CSI received ISO 50001 certification for energy management, ISO 14001 certification for facilities management, and OHSAS 18001 certification for several facilities. It also received awards from government organizations for its HSE performance and commitment to using alternative fuels. Statistics on total recordable incident rate and safe man hours worked are provided for 2006-2014. Three recordable incidents that occurred in 2015 are described. The document proposes commitments to improve safety, such as recognizing hazards, increasing safety observation and supervision, and not underestimating risk.
What's hot (8)
Sydney trains failure to uphold protection arrangements
Sydney trains failure to uphold protection arrangements
Viewers also liked
Toyota
Toyota Motor Corporation is a Japanese automotive manufacturer headquartered in Aichi, Japan. It was founded in 1937 and is the world's 14th largest company by revenue. Toyota is known for its Toyota Production System which focuses on just-in-time inventory management and the prevention of defects. Toyota produces a range of vehicles and also focuses on developing advanced robotics and fuel cell and electric vehicle technology to further its mission of building more sustainable and environmentally friendly cars.
Exp Engineering Automotive
Experis is a large professional staffing firm that provides high-performance engineering talent and solutions to the automotive industry. It has approximately 1,000 staff employees and places over 12,000 consultants annually in North America through its 100+ offices. Experis recruits for a wide range of automotive engineering positions and delivers candidates quickly through its established networks and recruiting expertise. It offers a full spectrum of resourcing solutions, from providing individual contractors to managing entire project outsourcing engagements. Experis leverages the global scale and financial stability of its parent company, ManpowerGroup, to reliably serve major automotive clients.
Introduction to Automotive Safety and Assessment Engineering Program at TGGS-...
The document discusses the Automotive Safety and Assessment Engineering (ASAE) program at the King Mongkut's University of Technology North Bangkok. It provides an overview of the program's history, research focus areas including vehicle safety, pedestrian safety, and motorcycle safety. It also outlines the program's course curriculum, research activities involving crash tests, simulations, and collaboration with international universities. The ASAE program aims to develop testing protocols and safety standards while researching injury mechanisms to improve vehicle and traffic safety.
Introduction to Automotive Safety
This document discusses the history of automotive safety and accidents. It covers some of the earliest automobile accidents in the late 1800s that resulted in injuries and fatalities. It then discusses the UN Decade of Road Safety from 2010-2020 and the "6 E's of Road Safety": education, enforcement, engineering, environment, enactment, and emergency response. Finally, it covers different automotive safety systems, dividing them into active safety systems that help prevent crashes and passive safety systems that help protect occupants during a crash.
Vehicle safety system
The document discusses various automobile safety systems such as ABS, collision warning systems, sturdy body cells, electronic stability control, blind spot detectors, survival cells, air bags, and seat belts. It provides details on how each system works, such as how ABS uses speed sensors and valves to allow wheels to maintain contact during braking. Safety is important for automakers and special departments work to improve safety. While safety systems help, following safe driving practices like wearing seat belts and avoiding speeding is also important for preventing accidents and injuries.
Automobile Ppt
The automobile industry in India has grown significantly over the past few decades. It began with only two major players and licensed manufacturing in the initial years. In the 1980s, more companies entered the market and government support increased. In the 1990s, delicensing led to more players and easier financing, creating a buyers market. Domestic sales and exports have grown strongly in recent years, with India now among the top global markets. Motorcycles dominate two-wheeler sales while passenger vehicles lead exports. Key players hold major shares in different vehicle segments. The industry faces challenges around infrastructure and customer expectations but benefits from favorable demographics and policy support focused on areas like product development, manufacturing, and supply chains.
Viewers also liked (6)
Introduction to Automotive Safety and Assessment Engineering Program at TGGS-...
Introduction to Automotive Safety and Assessment Engineering Program at TGGS-...
Similar to 5 Tips To Ensure Safety At Your Automotive Workplace
Pre-Operatoin Forklift Inspections: Why They MAtter and What to Check
Forklifts are a common sight in many industries. Whether used in warehouses, retail
applications or elsewhere, these vehicles are crucial tools in the daily operations of many
businesses. Because of this frequent level of use, however, many operators and nearby
pedestrians become complacent regarding safety protocols. This complacency can have many
ill effects, including asset damage, employee discipline, fines, injury, and even death.
Fork Lift Truck Association Safety 4MOST
The document discusses safety practices for operating forklift trucks. It addresses safety responsibilities for four areas:
1. Management safety - Managers are ultimately responsible for safety and must ensure proper training, equipment, and risk assessment.
2. Operator safety - Operators must respect equipment, follow training, and look out for others. Common unsafe practices like not wearing seatbelts are addressed.
3. Site safety - Sites should be designed, maintained, and have a culture that promotes safety. Hazards should be promptly addressed.
4. Truck safety - Proper trucks must be selected for the job and location. Regular maintenance and inspections are vital to ensure truck safety.
It Maintenance for TVT collage (Horaizone)
The document provides guidance on developing and implementing proper maintenance procedures for computer hardware and software. It outlines types of maintenance like preventative and corrective maintenance. Safety rules and general safety practices are discussed. Steps for documenting procedures, orienting staff, and ensuring adherence to maintenance schedules while observing occupational health and safety are presented. Maintaining equipment in good working order through organized maintenance activities is important.
5 Tips for Maintaining Overall Waste Fleet Health
Whether you have 1 truck or 1,000, it is critical to properly maintain your fleet. Waste handling companies can reduce costs when their fleet is up and running under an effective PMI program.
10 safety mistakes hotel managers make
The document outlines 10 safety mistakes that hotel managers commonly make and how to avoid them. These mistakes include cutting back on security personnel, not having evacuation routes posted in meeting rooms, insufficient lighting on the property, lack of employee training programs, non-compliance with OSHA standards, storing backup data on-site, not installing phones in fitness centers, failing to perform background checks on employees, not regularly checking detection devices, and not periodically inspecting emergency equipment. The author recommends implementing preventative safety measures to protect guests, employees, and the business.
AUTOMOTIVE SERVICING.pptx
The document provides information about an automotive servicing training program. It teaches the basic skills required for diagnosis, maintenance, and repair of passenger cars and light trucks. It identifies exterior parts of a vehicle's body from a picture and discusses factors to consider when planning and preparing for automotive repair tasks, such as having the proper workplace, materials, tools, safety procedures, and waste disposal. It stresses the importance of using tools that are in good condition and suitable for the job.
Planned preventive maintenance report
This document discusses planned preventive maintenance techniques. It divides maintenance activities into cleaning (C), oiling (O), and tightening (T). It recommends scheduling preventive maintenance tasks on a regular weekly basis. Key aspects of preventive maintenance include using computerized systems to generate and schedule tasks, focusing on operational efficiency, performance, safety, and cost reduction. Total productive maintenance (TPM) aims for zero breakdowns or defects by making all staff responsible for equipment. It utilizes techniques like autonomous maintenance, predictive analysis, and categorizing parts by importance.
Four steps to an audit proof measurement system by PQ Systems
Cuatro pasos para lograr un sistema de medición a "prueba de balas".
Mejore sus sistema de medición, asegure su calidad.
Gracias a PQ Systems, aliado de Blackberry&Cross desde 2006.
Más información: http://www.blackberycross.com
Mit lp training 2013 day 1
The document outlines the department structure and responsibilities of the Corporate Support Center, including sections on safety, policies and procedures, inventory control, claims, and investigations. It introduces the leadership team and specialist roles. The department is made up of six sections to help preserve revenue and profits through operational compliance assessments, training, and addressing issues.
Workshop anc-st-john's
The document provides information on farm safety training. It discusses responsibilities for farm safety, identifying hazards, and implementing controls. The training covers hazard management programs including identifying jobs and associated hazards, and steps to control hazards through engineered, administrative and personal protective equipment methods. It also addresses incident management and fall protection programs.
Duke_WhitePaper_PreventiveMaintenance.pdf
The document discusses how adopting a preventive maintenance mindset can help avoid costly equipment failures and downtime. It recommends shifting from a reactive "fix-it-when-it's-broken" strategy to a preventive strategy of scheduled maintenance check-ups. A preventive strategy can reduce maintenance costs by 40% and downtime by 50% by identifying issues before they cause problems. The document provides tips for creating a preventive maintenance mindset, including implementing total productive maintenance practices, being prepared for failures, scheduling regular maintenance checks, and ensuring adequate resources.
Industrial Preventative Maintenance - Nanoprecise
In the Nanoprecise, industrial preventative maintenance is a crucial aspect of ensuring the smooth operation and longevity of your machinery. Finally, by investing in proper preventive maintenance, you can save money in the long run while increasing overall production output. So don't wait any longer; start implementing these tips today!
Nanoprecise Data Services Pvt. Ltd. IndiQube- Edge Service Centre Khatha No. 571/630/6/4, (Sy No.6/4), Ambalipura Village, Outer Ring Road, Varthur Hobli,Bangalore-560103
Talk to our experts
at solutions@nanoprecise.io
Asia - +91 75681 21121
How to improve machine performance
Life of equipment depends not only on how well it is used but also on how well it is maintained. Various versions of maintenance techniques are in use. Total Productive Maintenance popularized by Japanese is one of the best methodology used worldwide
Lubrication linked with a maintenance strategy
As the industry has evolved, so have the practices and philosophies for how and when to perform maintenance and lubrication. More options and tools are now available to guide the actions of personnel for nearly all lubrication tasks.
Building Operational Excellence in Petroleum Refining Training Course
There are many aspects of building operational excellence. Partial list may include;
1. Health, Safety and the Environment
2. Reliability – Continuity of Operations
3. Quality
4. Cost
5. People Development
PM PRESENTATION
1) The document outlines the preventive maintenance program of Al Ayuni Investment and Contracting Company. It defines preventive maintenance and describes the goals of avoiding equipment failure and unplanned downtime.
2) Details of the planning, implementation, and documentation processes are provided. Formats for maintenance scheduling, part requirements, and task tracking are referenced.
3) Requirements for equipment, tools, and dedicated personnel are listed to properly support the preventive maintenance of all company assets. This includes service trucks, stations, and a separate vehicle for greasing tasks.
TPM the effective maintenance with Autonomous Maintenance
This is a 2 days course on Total Productive Maintenance (TPM) that will guide you through to implement Autonomous Maintenance (AM) on your current Equipment and to plan the execution of your Preventive (PM) & Predictive Maintenance (PdM).TPM defines your Maintenance schedule and Goals. TPM helps you plan and develop the optimal program for your facility, resulting in increased efficiency and cost savings.
Day 1
TPM General Overview with Autonomous
Maintenance (AM) as the back bone of TPM
6 Steps to Autonomous Maintenance
Audit , Review & Externalize Inspection Activities
from Equipment Manual to (AM)
Executing Equipment Audit to start (AM) & (PM)
-TPM Board & AM Checklist with Visual
Management Implementation.
project on safety and prevention measures in petrol pumps of indianoil corpo...
project on safety and prevention measures in petrol pumps of indianoil corpo...central institute of bussiness management and research and development
The document discusses safety measures and prevention in the workplace. It outlines several key control hierarchies for reducing risks, including designing processes to minimize hazardous substances, applying collective protection measures, and using personal protective equipment as a last resort. It also discusses providing safety training and information to workers, adopting hygiene measures, and keeping the number of exposed workers low. Several specific measures for oil refineries are mentioned, including requiring photo IDs, properly labeling equipment, maintaining stock records, and buying insurance while also implementing safety steps. The objectives are listed as determining the safety measures provided by Indian Oil Corporation.Procedure Based Maintenance
This white paper discusses the importance of procedure based maintenance in facilities. It argues that relying only on the skills and experience of maintenance staff can lead to failures and inconsistencies. Effective, repeatable procedures are needed to ensure safety, reliability, and sustainable results. The paper recommends making staff aware of issues, training them on procedures, implementing procedures, continuously improving, and monitoring results. Procedure based maintenance can help reduce variation and human error.
Procedure Based Maintenance White Paper
“My maintenance staff is highly trained and do not like using procedures.” If the statement is valid, and the cost of asset failure is not important to our operation, then your staff must have an unlimited and infallible memory – congratulations!
Did you know that the most complex equipment ever built was a nuclear submarine and that the first nuclear submarines experienced failures due to lack of effective procedures, thus ending in catastrophic failure?
If safety is number one in your organization, then repeatable, effective work procedures should be as well.
Similar to 5 Tips To Ensure Safety At Your Automotive Workplace (20)
Pre-Operatoin Forklift Inspections: Why They MAtter and What to Check
Pre-Operatoin Forklift Inspections: Why They MAtter and What to Check
Four steps to an audit proof measurement system by PQ Systems
Four steps to an audit proof measurement system by PQ Systems
Building Operational Excellence in Petroleum Refining Training Course
Building Operational Excellence in Petroleum Refining Training Course
TPM the effective maintenance with Autonomous Maintenance
TPM the effective maintenance with Autonomous Maintenance
project on safety and prevention measures in petrol pumps of indianoil corpo...
project on safety and prevention measures in petrol pumps of indianoil corpo...
Recently uploaded
EV Charging at MFH Properties by Whitaker Jamieson
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
EV Charging at Multifamily Properties by Kevin Donnelly
Kevin Donnelly gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill Roads
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Catalytic Converter theft prevention - NYC.pptx
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Hand Gesture Control Robotic Arm using image processing.pptx
Hand Gesture Control Robotic Arm using image processing
What do the symbols on vehicle dashboard mean?
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Expanding Access to Affordable At-Home EV Charging by Vanessa Warheit
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
一比一原版(WashU文凭证书)圣路易斯华盛顿大学毕业证如何办理
一模一样【微信：176555708】【(WashU文凭证书)圣路易斯华盛顿大学毕业证成绩单Offer】【微信：176555708】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
快速办理(napier毕业证书)英国龙比亚大学毕业证在读证明一模一样
学校原件一模一样【微信：741003700 】《(napier毕业证书)英国龙比亚大学毕业证》【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
AadiShakti Projects ( Asp Cranes ) Raipur
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
一比一原版(Columbia文凭证书)哥伦比亚大学毕业证如何办理
一模一样【微信：176555708】【(Columbia文凭证书)哥伦比亚大学毕业证成绩单Offer】【微信：176555708】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
Here's Why Every Semi-Truck Should Have ELDs
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
原版制作(Exeter毕业证书)埃克塞特大学毕业证完成信一模一样
学校原件一模一样【微信：741003700 】《(Exeter毕业证书)埃克塞特大学毕业证》【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Recently uploaded (17)
EV Charging at MFH Properties by Whitaker Jamieson
EV Charging at MFH Properties by Whitaker Jamieson
EV Charging at Multifamily Properties by Kevin Donnelly
EV Charging at Multifamily Properties by Kevin Donnelly
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill Roads
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill Roads
Hand Gesture Control Robotic Arm using image processing.pptx
Hand Gesture Control Robotic Arm using image processing.pptx
Expanding Access to Affordable At-Home EV Charging by Vanessa Warheit
Expanding Access to Affordable At-Home EV Charging by Vanessa Warheit
Globalfleet - global fleet survey 2021 full results
Globalfleet - global fleet survey 2021 full results
53286592-Global-Entrepreneurship-and-the-Successful-Growth-Strategies-of-Earl...
53286592-Global-Entrepreneurship-and-the-Successful-Growth-Strategies-of-Earl...
5 Tips To Ensure Safety At Your Automotive Workplace
- 1. 5 tips to ensure safety at your automotive workplace Specializes in installing and repairing lifts, waste oil containers, compressed air piping, dispensing systems for lubrication, dryers, exhaust, and bulk fluid.
- 2. Train Your Employees With Accident Prevention Program 1. Educating and training your employees with an accident prevention program will help them become aware of the safety procedures, practices, and discipline on how to work safely with various equipment. This will help prevent accidents, thus saving valuable lives. www.griceshopequipment.com
- 3. Inspect The Automotive Lifting Equipment 2. It is necessary to keep the shop floor clean when you are dealing with transmission fluid changes, oil changes and other vehicle maintenance procedures. The fluids spilled on the shop floor can be extremely dangerous. www.griceshopequipment.com
- 4. Keep The Floor Clean 3. Perform daily inspection of the Auto lifts and other equipment before using. This will help you identify a malfunction in the equipment. The sooner you identify the problems in the equipment, better it will be. It will help avoid accidents. www.griceshopequipment.com
- 5. Provide Safety Gear To Your Workers 4. Provide safety gear to your workers such as, protective eye goggles, gloves, and boots. Eye goggles will protect eyes from dangerous automotive debris. Gloves will ensure hand safety from hazardous chemicals, and boots will protect feet from sharp alien objects on the shop floor. www.griceshopequipment.com
- 6. Install Oil Pit Netting 5. Installing oil pit netting provides safety to both employees and visitors. It helps prevent fall accidents into the oil pits which contain hazardous liquids. Oil pit netting helps clearly see the level of the hazardous liquid inside the pit. www.griceshopequipment.com