Model Name EDO295FM01
Display Type AMOLED
Display Brand EDO
Interface MIPI
Screen Size 2.95
Orientation Landscape
Display Color Full Color
Manufacturer EDO
Resolution 1080(RGB)×1200
Driver IC COG Built-in RM67295
Active Area (mm) 50.11(H)×55.68(V) mm
Luminance 300 cd/m² (Typ.)
Viewing Angle 80/80/80/80 (Typ.)(CR≥200)
Color Depth 16.7M 105% (CIE1931)
Mass 10±1g
Refresh Rate 60Hz
Signal Type 39 pins MIPI (4 data lanes), FPC
https://www.panoxdisplay.com/amoled/2-95-amoled-1080x1200-vr.html
Model Name H497TLB01
Display Type AMOLED
Display Brand AUO
Interface MIPI
Screen Size 5.0
Orientation Portrait
Display Color Full Color
Manufacturer AUO
Resolution 720(RGB)×1280
Driver IC RM69052
Active Area (mm) 61.92(H)×110.08(V) mm
Luminance 250 cd/m² (Typ.)
Viewing Angle 80/80/80/80 (Min.)(CR≥200)
Color Depth 16.7M 100% (CIE1931)
Refresh Rate 60Hz
Signal Type MIPI DSI,39 pin
Voltage Supply
Operating Temp -30 ~ 60 °C
Storage Temp -40 ~ 70 °C
Aspect Ratio 9:16 (H: V)
Screen Type AM-OLED, OLED
Arrangement RGB Vertical Stripe
https://www.panoxdisplay.com/amoled/5-0-amoled-720x1280-full-color.html
Model Name H381DLN01
Display Type AMOLED
Display Brand AUO
Interface MIPI
Screen Size 3.81
Orientation Portrait
Display Color Full Color
Manufacturer AUO
Resolution 1080(RGB)×1200
Driver IC COG Built-in RM69071
Active Area (mm) 64.8(H)×72(V) mm
Luminance 100 cd/m² (Typ.)
Viewing Angle 80/80/80/80 (Min.)(CR≥480
Color Depth 16.7M 100% (CIE1931)
Refresh Rate 90Hz
Signal Type MIPI (4 data lanes), 39 pins, FPC
OLED detail
https://www.panoxdisplay.com/amoled/3-81-amoled-1080x1200-vr.html
3.5 inch OLED 1400x1600 MIPI VR DisplayPanox Display
Model Name AMS350MU04
Display Type AMOLED
Display Brand Samsung
Interface MIPI
Screen Size 3.5
Orientation Landscape
Display Color Full Color
Manufacturer Samsung
Resolution 1440(RG/BG)×1600
Driver IC Built-in COG S6E3HA3
Active Area (mm) 59.4 × 66 (H×V)
Luminance 165 cd/m² (Typ.)
Color Depth 16.7M 95% (CIE1931)
Refresh Rate 90Hz
Signal Type MIPI (2 ch, 4 data lanes) , FPC , 61 pins
OLED Porduct
https://www.panoxdisplay.com/amoled/3-5-amoled-1440x1600-vr-ams350mu04.html
Model Name AMS347FF01
Display Type AMOLED
Display Brand Samsung
Interface MIPI
Screen Size 3.47
Orientation Portrait
Display Color Full Color
Manufacturer Samsung
Resolution 360x640
Active Area (mm) 43.05(H)×76.80(V) mm
Luminance 300 cd/m² (Typ.)
Viewing Angle 80/80/80/80 (Min.)(CR≥10)
Color Depth 16.7M
Refresh Rate 60Hz
Signal Type MIPI DSI 1 lane
OLED Product
https://www.panoxdisplay.com/amoled/3-5-inch-oled-handheld-detection.html
Model Name BO269FM800
Display Type OLED, AM-OLED
Display Brand BOE
Interface MIPI
Screen Size 2.69
Orientation Landscape
Display Color Full Color
Manufacturer BOE
Resolution 800x600
Active Area (mm) 54.6 × 40.95 (H×V)
Luminance 460 cd/m² (Typ.)
Viewing Angle 80/80/80/80 (Min.)(CR≥1600)
Color Depth 16.7M
Signal Type MIPI (2 data lanes)
2.6 inch 240x320 AM OLED Display RGB MCU InterfacePanox Display
Model Name AMS260DN01
Display Type AMOLED
Display Brand Samsung
Interface SPI,RGB
Screen Size 2.6
Orientation Landscape
Display Color Full Color
Manufacturer Samsung
Resolution 240(RGB)×320, QVGA
Driver IC COG Built-in S6E63D3
Consumption 350/400mW (Typ./Max.)
Active Area (mm) 40.32(W)×54.08(H) mm
Bezel Area (mm) 43.0(W)×56.76(H) mm
Luminance 200 cd/m² (Typ.)
Viewing Angle -
Color Depth 262K 73% (CIE1931)
Mass 16.0g (Typ.)
Signal Type 8/9/16/18-bit 6800/8080 parallel, 6/16/18-bit RGB, SPI, 61 pins, FPC
OLED
https://www.panoxdisplay.com/amoled/2-6-amoled-full-color-320x240.html
1.78 inch 368x488 OLED Display Touch PanelPanox Display
This document is a product specification for a 1.78-inch AMOLED display with model number ED178AM368MS. Key details include:
- Display resolution of 368xRGBx448 dots with a pixel pitch of 78x78 μm
- Brightness of 315-385 cd/m2, contrast ratio over 10,000:1, and response time under 4ms
- Electrical specifications for normal, idle, and deep standby power consumption
- Recommended operating sequences and conditions for the touch IC and display driver
- Reliability testing parameters and mechanical dimensions
Model Name H497TLB01
Display Type AMOLED
Display Brand AUO
Interface MIPI
Screen Size 5.0
Orientation Portrait
Display Color Full Color
Manufacturer AUO
Resolution 720(RGB)×1280
Driver IC RM69052
Active Area (mm) 61.92(H)×110.08(V) mm
Luminance 250 cd/m² (Typ.)
Viewing Angle 80/80/80/80 (Min.)(CR≥200)
Color Depth 16.7M 100% (CIE1931)
Refresh Rate 60Hz
Signal Type MIPI DSI,39 pin
Voltage Supply
Operating Temp -30 ~ 60 °C
Storage Temp -40 ~ 70 °C
Aspect Ratio 9:16 (H: V)
Screen Type AM-OLED, OLED
Arrangement RGB Vertical Stripe
https://www.panoxdisplay.com/amoled/5-0-amoled-720x1280-full-color.html
Model Name H381DLN01
Display Type AMOLED
Display Brand AUO
Interface MIPI
Screen Size 3.81
Orientation Portrait
Display Color Full Color
Manufacturer AUO
Resolution 1080(RGB)×1200
Driver IC COG Built-in RM69071
Active Area (mm) 64.8(H)×72(V) mm
Luminance 100 cd/m² (Typ.)
Viewing Angle 80/80/80/80 (Min.)(CR≥480
Color Depth 16.7M 100% (CIE1931)
Refresh Rate 90Hz
Signal Type MIPI (4 data lanes), 39 pins, FPC
OLED detail
https://www.panoxdisplay.com/amoled/3-81-amoled-1080x1200-vr.html
3.5 inch OLED 1400x1600 MIPI VR DisplayPanox Display
Model Name AMS350MU04
Display Type AMOLED
Display Brand Samsung
Interface MIPI
Screen Size 3.5
Orientation Landscape
Display Color Full Color
Manufacturer Samsung
Resolution 1440(RG/BG)×1600
Driver IC Built-in COG S6E3HA3
Active Area (mm) 59.4 × 66 (H×V)
Luminance 165 cd/m² (Typ.)
Color Depth 16.7M 95% (CIE1931)
Refresh Rate 90Hz
Signal Type MIPI (2 ch, 4 data lanes) , FPC , 61 pins
OLED Porduct
https://www.panoxdisplay.com/amoled/3-5-amoled-1440x1600-vr-ams350mu04.html
Model Name AMS347FF01
Display Type AMOLED
Display Brand Samsung
Interface MIPI
Screen Size 3.47
Orientation Portrait
Display Color Full Color
Manufacturer Samsung
Resolution 360x640
Active Area (mm) 43.05(H)×76.80(V) mm
Luminance 300 cd/m² (Typ.)
Viewing Angle 80/80/80/80 (Min.)(CR≥10)
Color Depth 16.7M
Refresh Rate 60Hz
Signal Type MIPI DSI 1 lane
OLED Product
https://www.panoxdisplay.com/amoled/3-5-inch-oled-handheld-detection.html
Model Name BO269FM800
Display Type OLED, AM-OLED
Display Brand BOE
Interface MIPI
Screen Size 2.69
Orientation Landscape
Display Color Full Color
Manufacturer BOE
Resolution 800x600
Active Area (mm) 54.6 × 40.95 (H×V)
Luminance 460 cd/m² (Typ.)
Viewing Angle 80/80/80/80 (Min.)(CR≥1600)
Color Depth 16.7M
Signal Type MIPI (2 data lanes)
2.6 inch 240x320 AM OLED Display RGB MCU InterfacePanox Display
Model Name AMS260DN01
Display Type AMOLED
Display Brand Samsung
Interface SPI,RGB
Screen Size 2.6
Orientation Landscape
Display Color Full Color
Manufacturer Samsung
Resolution 240(RGB)×320, QVGA
Driver IC COG Built-in S6E63D3
Consumption 350/400mW (Typ./Max.)
Active Area (mm) 40.32(W)×54.08(H) mm
Bezel Area (mm) 43.0(W)×56.76(H) mm
Luminance 200 cd/m² (Typ.)
Viewing Angle -
Color Depth 262K 73% (CIE1931)
Mass 16.0g (Typ.)
Signal Type 8/9/16/18-bit 6800/8080 parallel, 6/16/18-bit RGB, SPI, 61 pins, FPC
OLED
https://www.panoxdisplay.com/amoled/2-6-amoled-full-color-320x240.html
1.78 inch 368x488 OLED Display Touch PanelPanox Display
This document is a product specification for a 1.78-inch AMOLED display with model number ED178AM368MS. Key details include:
- Display resolution of 368xRGBx448 dots with a pixel pitch of 78x78 μm
- Brightness of 315-385 cd/m2, contrast ratio over 10,000:1, and response time under 4ms
- Electrical specifications for normal, idle, and deep standby power consumption
- Recommended operating sequences and conditions for the touch IC and display driver
- Reliability testing parameters and mechanical dimensions
EDO 1.47 inch AM-OLED 194X368 SPI InterfacePanox Display
Model Name E1473AC63
Display Type OLED
Display Brand EDO
Interface SPI
Screen Size 1.47 inch
Orientation Portrait
Display Color Full Color
Manufacturer EDO
Resolution 194x368
Driver IC SH8501B(COF)
Active Area (mm) 17.46 (W)×33.12 (H) mm
Luminance 500 cd/m² (Max)
Viewing Angle 85/85/85/85 (Typ.)(CR≥200)
Color Depth 16.7M (RGB x 24 bits)
Refresh Rate 55 Hz
Signal Type Q-SPI
Voltage Supply 1.8/3.3/3.3/-3.3 V (Typ.)(VDDIO/VCI/ELVDD/ELVSS)
OLED Product
https://www.panoxdisplay.com/amoled/147oled197rgb368spi.html
EDO 1.41 inch On-Cell PCAP Touch Panel 320X360Panox Display
Display Type OLED
Display Brand EDO/AUO
Interface MIPI
Screen Size 1.41
Orientation Portrait
Display Color Full Color
Manufacturer EDO
Resolution 320(RGB)×360
Driver IC RM67162
Active Area (mm) 23.84(H)×26.82(V) mm
Luminance 350 cd/m² (Typ.)
Viewing Angle 88/88/88/88 (Typ.)(CR≥10)
Color Depth 16.7M 105% (CIE1931)
Mass 3.95g (Typ.)
Refresh Rate 60Hz
Signal Type 30 pins MIPI (1 data lane) , Connector
OLED page
https://www.panoxdisplay.com/amoled/1-41-amoled-full-color-320x360.html
Model: H139BLN01.0 (AUO 24 pins Left side interface)
E1392AM1 (EDO 20 pins Right Side Interface)
Display Brand AUO/EDO
Interface MIPI
Screen Size 1.39
Orientation Landscape
Display Color Full Color
Manufacturer AUO/EDO
Resolution 400(RGB)×400
Driver IC RM69080/RM67160
Active Area (mm) 35.4 × 35.4 (H×V)
Luminance 350 or 300 cd/m² (Typ.)
Viewing Angle 80/80/80/80 (Min.)(CR≥1600)
Color Depth 16.7M 100% (CIE1931)
Mass 2.15±0.33g
Refresh Rate 30 Hz
Signal Type MIPI (1 data lane) , Connector , 24 pins/20 pins
OLED Product Page
https://www.panoxdisplay.com/amoled/1-39-round-amoled-full-color-400x400.html
1.39 inch OLED 454X454 OLED MIPI InterfacePanox Display
Model Name BOE139F454SM
Display Type AMOLED
Display Brand BOE
Interface MIPI
Screen Size 1.39
Orientation Landscape
Display Color Full Color
Manufacturer BOE
Resolution 454(RGB)×454
Driver IC RM67162FI
Active Area (mm) 35.412(H)×35.412(V) mm
Bezel Area (mm) 38.212(H)×38.212(V)x0.5(T) mm
Luminance 350 cd/m² (Typ.)
Viewing Angle 80/80/80/80 (Min.)(CR≥1600)
Color Depth 16.7M 100% (CIE1931)
Mass 2.65 g
Signal Type MIPI (1 data lane) , 20 pins , Connector
Voltage Supply 1.8/2.8/4.6/-2.4V (Typ.)(VDDIO/VCI/ELVDD/ELVSS)
Operating Temp -30 ~ 70 °C
Storage Temp -40 ~ 80 °C
AMOLED product
https://www.panoxdisplay.com/amoled/1-39-round-amoled-454x454.html
Display Type AM-OLED
Display Brand BOE
Interface SPI,MIPI
Screen Size 1.39 inch
Orientation Landscape
Display Color Full Color
Manufacturer BOE
Resolution 454x454
Driver IC RM69330
Consumption 50uW~260mW
Active Area (mm) ¢35.412
Luminance 800 cd/m2 (Max)
Viewing Angle 80/80/80/80 (Typ.)(CR≥10)
Color Depth 16.7M
Refresh Rate 45 Hz
For More Display Photo
https://www.panoxdisplay.com/amoled/1-39-inch-round-oled-454x454-spi.html
OLED Display 1.2 inch 60 Hz 390x390 QSPIPanox Display
Model Name E120A390QSR
Screen Size 1.2 inch
Interface QSPI,MIPI
Active Area 30.42(W)×30.42(H) mm
Resolution 390x390 325 PPI
Contrast Ratio 100000:1 (Typ.) (TM)
OLED information
https://www.panoxdisplay.com/amoled/1-2-inch-round-oled-390-spi-60hz.html
OLED Display 0.95 inch 120x240 SPI For SmartBandPanox Display
Model Name TR095A120SPC
Display Type AMOLED
Interface SPI
Resolution 120(RGB)×240
Luminance 400 ~500 cd/m²
Active Area (mm) 10.8 X 21.6 mm
Contrast Ratio 80000:1 (Typ.) (TM)
Product Photo
https://www.panoxdisplay.com/amoled/0-95-amoled-120x240-spi-truly-edition.html
EDO 1.47 inch AM-OLED 194X368 SPI InterfacePanox Display
Model Name E1473AC63
Display Type OLED
Display Brand EDO
Interface SPI
Screen Size 1.47 inch
Orientation Portrait
Display Color Full Color
Manufacturer EDO
Resolution 194x368
Driver IC SH8501B(COF)
Active Area (mm) 17.46 (W)×33.12 (H) mm
Luminance 500 cd/m² (Max)
Viewing Angle 85/85/85/85 (Typ.)(CR≥200)
Color Depth 16.7M (RGB x 24 bits)
Refresh Rate 55 Hz
Signal Type Q-SPI
Voltage Supply 1.8/3.3/3.3/-3.3 V (Typ.)(VDDIO/VCI/ELVDD/ELVSS)
OLED Product
https://www.panoxdisplay.com/amoled/147oled197rgb368spi.html
EDO 1.41 inch On-Cell PCAP Touch Panel 320X360Panox Display
Display Type OLED
Display Brand EDO/AUO
Interface MIPI
Screen Size 1.41
Orientation Portrait
Display Color Full Color
Manufacturer EDO
Resolution 320(RGB)×360
Driver IC RM67162
Active Area (mm) 23.84(H)×26.82(V) mm
Luminance 350 cd/m² (Typ.)
Viewing Angle 88/88/88/88 (Typ.)(CR≥10)
Color Depth 16.7M 105% (CIE1931)
Mass 3.95g (Typ.)
Refresh Rate 60Hz
Signal Type 30 pins MIPI (1 data lane) , Connector
OLED page
https://www.panoxdisplay.com/amoled/1-41-amoled-full-color-320x360.html
Model: H139BLN01.0 (AUO 24 pins Left side interface)
E1392AM1 (EDO 20 pins Right Side Interface)
Display Brand AUO/EDO
Interface MIPI
Screen Size 1.39
Orientation Landscape
Display Color Full Color
Manufacturer AUO/EDO
Resolution 400(RGB)×400
Driver IC RM69080/RM67160
Active Area (mm) 35.4 × 35.4 (H×V)
Luminance 350 or 300 cd/m² (Typ.)
Viewing Angle 80/80/80/80 (Min.)(CR≥1600)
Color Depth 16.7M 100% (CIE1931)
Mass 2.15±0.33g
Refresh Rate 30 Hz
Signal Type MIPI (1 data lane) , Connector , 24 pins/20 pins
OLED Product Page
https://www.panoxdisplay.com/amoled/1-39-round-amoled-full-color-400x400.html
1.39 inch OLED 454X454 OLED MIPI InterfacePanox Display
Model Name BOE139F454SM
Display Type AMOLED
Display Brand BOE
Interface MIPI
Screen Size 1.39
Orientation Landscape
Display Color Full Color
Manufacturer BOE
Resolution 454(RGB)×454
Driver IC RM67162FI
Active Area (mm) 35.412(H)×35.412(V) mm
Bezel Area (mm) 38.212(H)×38.212(V)x0.5(T) mm
Luminance 350 cd/m² (Typ.)
Viewing Angle 80/80/80/80 (Min.)(CR≥1600)
Color Depth 16.7M 100% (CIE1931)
Mass 2.65 g
Signal Type MIPI (1 data lane) , 20 pins , Connector
Voltage Supply 1.8/2.8/4.6/-2.4V (Typ.)(VDDIO/VCI/ELVDD/ELVSS)
Operating Temp -30 ~ 70 °C
Storage Temp -40 ~ 80 °C
AMOLED product
https://www.panoxdisplay.com/amoled/1-39-round-amoled-454x454.html
Display Type AM-OLED
Display Brand BOE
Interface SPI,MIPI
Screen Size 1.39 inch
Orientation Landscape
Display Color Full Color
Manufacturer BOE
Resolution 454x454
Driver IC RM69330
Consumption 50uW~260mW
Active Area (mm) ¢35.412
Luminance 800 cd/m2 (Max)
Viewing Angle 80/80/80/80 (Typ.)(CR≥10)
Color Depth 16.7M
Refresh Rate 45 Hz
For More Display Photo
https://www.panoxdisplay.com/amoled/1-39-inch-round-oled-454x454-spi.html
OLED Display 1.2 inch 60 Hz 390x390 QSPIPanox Display
Model Name E120A390QSR
Screen Size 1.2 inch
Interface QSPI,MIPI
Active Area 30.42(W)×30.42(H) mm
Resolution 390x390 325 PPI
Contrast Ratio 100000:1 (Typ.) (TM)
OLED information
https://www.panoxdisplay.com/amoled/1-2-inch-round-oled-390-spi-60hz.html
OLED Display 0.95 inch 120x240 SPI For SmartBandPanox Display
Model Name TR095A120SPC
Display Type AMOLED
Interface SPI
Resolution 120(RGB)×240
Luminance 400 ~500 cd/m²
Active Area (mm) 10.8 X 21.6 mm
Contrast Ratio 80000:1 (Typ.) (TM)
Product Photo
https://www.panoxdisplay.com/amoled/0-95-amoled-120x240-spi-truly-edition.html
4. 版 本 号:01
第 4 页 / 共 16 页
1 Scope
2 Features
2.1 Product Applications
VR (Virtual Reality)
2.2 Product Features
1) Display color:16.7M (RGB x 8bits)
2) Display format:2.95” 1080 x 1200
3) Pixel arrangement:Sub Pixel Rendering
4) Interface:MIPI 4 lanes
5) Driver IC:RM 67295
6) Frequency: 90 Hz
3 Mechanical Specifications
Item Specification unit
Dimension outline 52.91 x 62.58 x 0.65 (Including Cushion) mm
LTPS Glass outline 52.91 x 62.58 mm
Encapsulation Glass outline 52.91 x 59.58 mm
Resolution 1080(W) x 1200(H)
Active area 50.11 x 55.68 mm
Diagonal size 2.95 inch
Pixel pitch 23.2 x 46.4 μm
Glass thickness
(LTPS/encapsulation glass)
0.2 / 0.2 mm
Weight 10 (±10%, without FPC) g
Note: Refer to 9 Outline Dimension Drawing
Panox Display
sales@panoxdisplay.com
skype: panoxwesley
5. 版 本 号:01
第 5 页 / 共 16 页
4 Maximum Rating
Parameter Symbol
Spec
Unit Note
Min. Typ. Max.
Analog/boost power voltage VCI -0.3 - 5.5 V -
VCI I/O voltage VCI_IF -0.3 - 5.5 V -
I/O voltage VDDI -0.3 - 5.5 V -
VSP voltage VSP -0.3 - 6.6 V -
VPP(OTP power) VPP(NC) - - 8.25 V -
Operating temperature Top -40 85 ℃
Storage temperature Tstg -55 125 ℃
5 Electrical Specifications
5.1 Electrical Characteristics
5.1.1 Power Characteristic:
Item Symbol Min. Typ. Max. Unit Remark
AMOLED Power
positive
ELVDD - 4.6 - V
AMOLED power
Negative
ELVSS - -2.5 - V Ref
Gamma Voltage VSP 6.1 6.4 6.5 V Ref
Digital Power supply VDDI 1.65 1.8 3.6 V Ref
Analog Power supply VCI 2.5 3.3 4.8 V Ref
Mode Symbol Condition Min. Typ. Max. Unit Remark
@
Gray 255
IELVDD / IELVSS VELVDD = 4.6V
VELVSS =-2.5V
VCI =3.3V
VDDIO =1.8V
VSP =6.4
TBD mA Ref
IVCI TBD mA Ref
IVDDIO TBD mA Ref
IVSP TBD mA Ref
Panox Display
sales@panoxdisplay.com
skype: panoxwesley
6. 版 本 号:01
第 6 页 / 共 16 页
5.1.2 Power supply circuit application (This is for reference only):
Power IC recommend: ST:STAM1330, Silicon Mitus:SM3301, Richtek:RT4722
5.2 I/O Connection and Block Diagrams
5.2.1 I/O Connection
# Pin Name I/O Description
1 ELVSS Power AMOLED power Negative
2 ELVSS Power AMOLED power Negative
3 ELVSS Power AMOLED power Negative
4 ELVDD Power AMOLED power Positive
5 ELVDD Power AMOLED power Positive
6 ELVDD Power AMOLED power Positive
7 GND Power The power ground
8 D2N Power MIPI DSI data2-
9 D2P O MIPI DSI data2+
10 GND I The power ground
11 D0N O MIPI DSI data0-
12 D0P I MIPI DSI data0+
13 GND Power The power ground
14 CLKN Power MIPI DSI clock-
15 CLKP Power MIPI DSI clock+
16 GND I/O The power ground
17 D1N Power MIPI DSI data1-
Panox Display
sales@panoxdisplay.com
skype: panoxwesley
7. 版 本 号:01
第 7 页 / 共 16 页
18 D1P I/O MIPI DSI data1+
19 GND I The power ground
20 D3N Power MIPI DSI data3-
21 D3P Power MIPI DSI data3+
22 GND Power The power ground
23 VDDIO I Driver IC digital I/O supply
24 VDDIO I Driver IC digital I/O supply
25 VCI Power Driver IC analog supply
26 VCI Power Driver IC analog supply
27 RESX I
This signal will reset the device and must be applied to
properly initialize the chip. Active low.
28 SWIRE O Power IC control pin
29 OLED_EN O Power IC enable
30 MTP Power
Power supply for OTP.
Leave the pin to open when not in use.
31 GND I/O The power ground
32 VSP Power Power supply for Analog system
33 VSP Power Power supply for Analog system
34 ELVDD Power AMOLED power Positive
35 ELVDD Power AMOLED power Positive
36 ELVDD Power AMOLED power Positive
37 ELVSS Power AMOLED power Negative
38 ELVSS Power AMOLED power Negative
39 ELVSS Power AMOLED power Negative
5.2.2 Display Module Block Diagram
Panox Display
sales@panoxdisplay.com
skype: panoxwesley
10. 版 本 号:01
第 10 页 / 共 16 页
5.4.4 Timing Parameters
Parameter Description Min Typ Max Unit
TCLK-POST
Time that the transmitter continues to send
HS clock after the last associated Data Lane
has transitioned to LP Mode. Interval is
defined as the period from the end of
THS-TRAIL to the beginning of TCLK-TRAIL.
60ns +
52*UI
- - ns
TCLK-TRAIL
Time that the transmitter drives the HS-0
state after the last payload clock bit of a
HS transmission burst.
60 - - ns
THS-EXIT
Time that the transmitter drives LP-11
following a HS burst.
300 - - ns
TCLK-TERM-EN
Time for the Clock Lane receiver to enable
the HS line termination, starting from the
time point when Dn crosses VIL,MAX.
Time for
Dn to
reach
VTERM-EN
- 38 ns
TCLK-PREPARE
Time that the transmitter drives the Clock
Lane LP-00 Line state immediately before the
HS-0 Line state starting the HS
transmission.
38 - 95 ns
TCLK-PRE
Time that the HS clock shall be driven by the
transmitter prior to any associated Data
Lane beginning the transition from LP to HS
mode.
8 - - UI
TCLK-PREPARE +
TCLK-ZERO
TCLK-PREPARE + time that the transmitter
drives the HS-0 state prior to starting the
Clock.
300
- - ns
TD-TERM-EN
Time for the Data Lane receiver to enable the
HS line termination, starting from the time
point when Dn crosses VIL,MAX .
Time for
Dn to
reach
VTERM-EN
-
35 ns
+4*UI
ns
THS-PREPARE
Time that the transmitter drives the Data
Lane LP-00 Line state immediately before the
HS-0 Line state starting the HS transmission
40ns +
4*UI
-
85 ns +
6*UI
ns
THS-PREPARE +
THS-ZERO
THS-PREPARE + time that the transmitter
drives the HS-0 state prior to transmitting
the Sync sequence.
145ns +
10*UI
-
85ns+6*
UI
ns
THS-TRAIL
Time that the transmitter drives the flipped
differential state after last payload data
bit of a HS transmission burst
60ns +
4*UI
- - ns
Panox Display
sales@panoxdisplay.com
skype: panoxwesley
11. 版 本 号:01
第 11 页 / 共 16 页
5.4.5 Timing requirements for RESETB
When RESETB of the reset pin equals to Low, it will be in the condition of reset.
When it is in the condition of reset, it will make the device recover the initial set.
However, in order to avoid the reset noise cause reset, there is a mechanism to judge about
whether the reset is needed or not. The closed interval of Low can be shown as the
following.
Figure: Reset timing
(Test condition: VDDIO=1.65V~3.6V, VSS=0V, TA=-20℃~+85℃)
Symbol Parameter
Related
Pins
Spec
Note Unit
Min. Typ. Max.
TRESW
Reset low
pulse width
RESX 10 us
TREST
Reset
complete time
- 5
When reset applied
during Sleep in mode
ms
- 120
When reset applied
during Sleep out mode
ms
Table: Reset timing
6 Electro-Optical Specification
Item Symbol Conditions Min. Typ. Max. Unit Remark
Brightness
Note1
100 - cd/m2
Note2
Brightness Uniformity 75 - %
Contrast Ratio CR 10,000 - -
CIE
Chro
mati
city
White
x
Normal to surface
(0.28) (0.3) (0.32) -
y (0.29) (0.31) (0.33) -
Red
x (0.63) (0.66) (0.69) -
y (0.31) (0.34) (0.37) -
Green
x (0.16) (0.21) (0.26) -
y (0.68) (0.73) (0.78) -
Blue
x (0.09) (0.13) (0.17) -
y (0.02) (0.06) (0.10) -
Color Gamut vs. NTSC 80 105 - %
Viewing angle U/D/L/R CR≥200 80 - °
Panox Display
sales@panoxdisplay.com
skype: panoxwesley
12. 版 本 号:01
第 12 页 / 共 16 页
Cross-talk
4% black or white
window, 117 gray scale
- - 5 % Note3
Gamma
V(Gray)=48,72,104,132,
164,192,224,255
2.0 2.2 2.4 -
Response time - - 2 ms Note 4
Note1: Temp.25℃,
(Angle、distance)
Environmental conditions:Temp.25℃±3℃,65±20%RH,Dark Room。
Distance of OLED display center to measuring machine is 50cm。
Note2: Brightness, Brightness Uniformity and Contrast Ratio definition
Measure 5 points of Display Brightness. P1~P5.
1) Brightness definition
Luminance = [ P1 + P2 + P3 + P4 + P5 ] / 5
2) Brightness Uniformity definition
Brightness Uniformity = Y(min) / Y(max)
3) Contrast Ratio definition
Dark Room C.R= Luminance (White) / Luminance (Black)
Note3: Cross-talk
4% black or white window ,117 gray background.
Panox Display
sales@panoxdisplay.com
skype: panoxwesley
13. 版 本 号:01
第 13 页 / 共 16 页
LW_OFF =
Lw1+Lw2+Lw3+Lw4
4
LB_OFF =
LB1+LB2+LB3+LB4
4
CT =
|LWi_ON − LW_OFF|
LW_OFF
× 100%(i = 5 𝑡𝑜 8)
For white windows AWi (i = 5 to 8), and
CT =
|LBi_ON − LB_OFF|
LB_OFF
× 100%(i = 5 to 8)
For black windows ABi (i = 5 to 8).
The maximum cross-talk value shall be noted in the measurement report.
Note4: Response Time
Response time=Pixel turn on and turn off time (White<=>Black).
It is measuring transition time from 10% to 90% of luminance.
7 Reliability
7.1 Environmental Test
No Item Conditions(Note1)
1 High Temperature Operation 60℃ / 128 hours
2 High Temperature non-Operation 70℃ / 128 hours
3 Low Temperature Operation -20℃ / 128 hours
4 Low Temperature non-Operation -30℃ / 128 hours
7.2 Electrical Test
No Item Conditions
1 Air discharge ±4KV,150PF/330Ω (Module level)
2 Contact discharge ±3KV, 150PF/330Ω (Module level)
Panox Display
sales@panoxdisplay.com
skype: panoxwesley
14. 版 本 号:01
第 14 页 / 共 16 页
8 Handling Precautions
8.1 When cleaning ITO pad, avoid using hard and abrasive material or corrosive solution.
8.2 Keep module away from direct sunlight or fluorescent light, and keep it at room
temperature and humidity.
8.3 Strong impact & pressure on module and packing is prohibited.
8.4 Following normal power on/off sequence is necessary for preventing abnormal display
or permanent damage to display.
8.5 Optimal contrast ratio under ideal voltage is AMOLED module’s characteristic, hence it
is recommended a voltage control function available.
8.6 Image sticking may occur if an image displays for an extended period of time.
8.7 When interfered by system’s overall mechanical design, an abnormal display may
occur.
8.8 After considering emitting energy, you should plan your design to satisfy EMI
standards.
8.9 Host side should place a surge-prevent circuit at power trace (ie: VCI, Vddi) to protect
AMOLED module.
Panox Display
sales@panoxdisplay.com
skype: panoxwesley