This document contains log entries from April 30, 2013 where entries were made at 9:03:32 PM, 9:03:42 PM, and 9:03:44 PM but does not include any other context or information about the content of the log entries.
The document discusses drugs that act on the autonomic nervous system, including:
- Adrenergic drugs that stimulate the sympathetic nervous system by mimicking norepinephrine and epinephrine. This includes both catecholamines and non-catecholamines.
- Adrenergic blockers that block the actions of norepinephrine and epinephrine at adrenergic receptor sites. This includes both alpha-blockers and beta-blockers.
- Cholinergic drugs that stimulate the parasympathetic nervous system by mimicking acetylcholine, and anticholinergic drugs that block acetylcholine's actions. Cholinergic drugs can be direct-acting or indirect-
This document provides an overview of sheet metal forming processes. It discusses both cutting (shearing) operations like punching, blanking, and notching as well as forming operations like bending, drawing, squeezing, and hydroforming. The document describes various bending operations including V-bending, roll bending, and tube bending. It also discusses processes for forming parts like deep drawing, ironing, redrawing, and the multi-step metal forming process used to produce aluminum beverage cans.
Sheet metal is a thin piece of metal between 0.006 and 0.25 inches thick. Sheet metal can be cut, bent, and stretched into various shapes through forming and cutting operations. Common forming operations include bending, deep drawing, and roll forming. Common cutting operations include shearing, blanking, punching, notching, and slitting. Sheet metal workers use tools like dies and presses to perform these operations and shape the metal.
The document discusses drugs used to treat respiratory conditions like the common cold, allergies, asthma, and COPD. It describes the actions and side effects of various antihistamines (sedating like Benadryl and non-sedating like Claritin), decongestants, expectorants, bronchodilators like albuterol, leukotriene inhibitors like Singulair, and inhaled or oral corticosteroids. Treatment approaches are outlined for varying severities of asthma using these drug classes in a stepwise approach. COPD treatments include long-acting bronchodilators, anticholinergics like Atrovent, and oral medications like Theophylline.
This document provides information on various construction projects completed by Shitole Industries. It lists several projects including building structures for Infosys and Cognizant with heights up to 38 meters and tonnages up to 800 tons. Other projects included precast column erection for Liebherr up to 42 columns of 40 tons each at 20 meters height and precast work for Precast India including columns of 25 tons and rafters of 18 tons. The largest project was a pre-engineered building for Simplex Pre-Fab with a plan area of 5500 square meters and total tonnage of 2500 tons.
This document provides guidelines for calibration laboratories seeking accreditation for mechanical measurements. It outlines general requirements for organization, management systems, personnel, facilities, equipment, calibration range and uncertainty, certificates, and proficiency testing. The document defines calibration and measurement capability (CMC) and states that laboratories must comply with requirements in ISO/IEC 17025. It describes maintaining traceability of measurements to national standards and monitoring equipment performance. Laboratories must demonstrate they can achieve their claimed measurement uncertainties.
This document provides guidelines for calibration laboratories seeking accreditation for thermal and optical measurements. It discusses the organization, management system, personnel, facilities, equipment, measurement traceability, and other general requirements for laboratories. The document has three parts: Part I discusses general requirements, Part II provides specific criteria for different thermal and optical parameters, and Part III gives guidelines on measurement uncertainties for various standard accuracies.
The document discusses drugs that act on the autonomic nervous system, including:
- Adrenergic drugs that stimulate the sympathetic nervous system by mimicking norepinephrine and epinephrine. This includes both catecholamines and non-catecholamines.
- Adrenergic blockers that block the actions of norepinephrine and epinephrine at adrenergic receptor sites. This includes both alpha-blockers and beta-blockers.
- Cholinergic drugs that stimulate the parasympathetic nervous system by mimicking acetylcholine, and anticholinergic drugs that block acetylcholine's actions. Cholinergic drugs can be direct-acting or indirect-
This document provides an overview of sheet metal forming processes. It discusses both cutting (shearing) operations like punching, blanking, and notching as well as forming operations like bending, drawing, squeezing, and hydroforming. The document describes various bending operations including V-bending, roll bending, and tube bending. It also discusses processes for forming parts like deep drawing, ironing, redrawing, and the multi-step metal forming process used to produce aluminum beverage cans.
Sheet metal is a thin piece of metal between 0.006 and 0.25 inches thick. Sheet metal can be cut, bent, and stretched into various shapes through forming and cutting operations. Common forming operations include bending, deep drawing, and roll forming. Common cutting operations include shearing, blanking, punching, notching, and slitting. Sheet metal workers use tools like dies and presses to perform these operations and shape the metal.
The document discusses drugs used to treat respiratory conditions like the common cold, allergies, asthma, and COPD. It describes the actions and side effects of various antihistamines (sedating like Benadryl and non-sedating like Claritin), decongestants, expectorants, bronchodilators like albuterol, leukotriene inhibitors like Singulair, and inhaled or oral corticosteroids. Treatment approaches are outlined for varying severities of asthma using these drug classes in a stepwise approach. COPD treatments include long-acting bronchodilators, anticholinergics like Atrovent, and oral medications like Theophylline.
This document provides information on various construction projects completed by Shitole Industries. It lists several projects including building structures for Infosys and Cognizant with heights up to 38 meters and tonnages up to 800 tons. Other projects included precast column erection for Liebherr up to 42 columns of 40 tons each at 20 meters height and precast work for Precast India including columns of 25 tons and rafters of 18 tons. The largest project was a pre-engineered building for Simplex Pre-Fab with a plan area of 5500 square meters and total tonnage of 2500 tons.
This document provides guidelines for calibration laboratories seeking accreditation for mechanical measurements. It outlines general requirements for organization, management systems, personnel, facilities, equipment, calibration range and uncertainty, certificates, and proficiency testing. The document defines calibration and measurement capability (CMC) and states that laboratories must comply with requirements in ISO/IEC 17025. It describes maintaining traceability of measurements to national standards and monitoring equipment performance. Laboratories must demonstrate they can achieve their claimed measurement uncertainties.
This document provides guidelines for calibration laboratories seeking accreditation for thermal and optical measurements. It discusses the organization, management system, personnel, facilities, equipment, measurement traceability, and other general requirements for laboratories. The document has three parts: Part I discusses general requirements, Part II provides specific criteria for different thermal and optical parameters, and Part III gives guidelines on measurement uncertainties for various standard accuracies.
Investing in land has several benefits: it is easy to invest in, has low risk, provides ownership and control over price. There are also options to either pay in full or through installments over 48 months, with the company offering to buy back the plot at double the rate. The document promotes a land development project in Pali, noting its proximity to beaches, forts and other attractions. It highlights factors considered like affordable prices and EMIs, plans for residential development, and infrastructure with roads. The project offers facilities like a clubhouse, pools, cottages and gardens for rejuvenation.
Yellow Chilli is a reputed food chain in the hospitality industry endorsed by famous chef Sanjeed Kapoor. They offer a variety of exotic dishes and an in-house bar. Yellow Chilli trusted Fireman India Security Solutions to implement a CCTV surveillance project at their Pune, Maharashtra restaurant, installing four high-resolution day and night cameras along with a Digital Video Recorder.
This document discusses different types of partitions including classroom partitions used to divide classrooms, industrial partitions for warehouses and factories, mall partitions to create separate areas in shopping centers, partitions with staggered joints to join panels at different heights, and toilet partitions to separate bathroom stalls.
The document lists various types of prefabricated structures that could be constructed including bungalow out houses, farm houses, hotel cottages, labour colonies, rooms on terraces, sample flats, site offices, and site office interiors. It also mentions mazzenine flooring and schools and colleges.
PCS Corporation manufactures plastic moulds and components. It has moderate performance capability and financial strength. Key strengths include the proprietor's 10 years of experience and established supplier relationships. Risks include weak organization structure and systems, geographic concentration, raw material price volatility, and weak margins. Financials show increasing sales and profits over the past three years due to higher orders and manufacturing commencement in 2011-12. However, organization and financial risks remain.
This document provides an introduction and overview of S R Home Appliances Pvt. Ltd., an Indian company that manufactures water treatment plants and partners with other companies like Prakruti Environmental Engineers. It summarizes the types of plants manufactured like purified water plants, waste water treatment plants, reverse osmosis plants, and lists the industries served. Key aspects of quality assurance and some client examples are also briefly mentioned.
This document provides dimensional standards for butt welding pipe fittings according to ANSI B-16.9, B-16.28, and MS SS P43 standards. It includes specifications for 90 degree elbows and 180 degree return bends in short radius configurations for various nominal pipe sizes from 1/2 inch to 36 inches. Charts list dimensions for outside diameter, center to face, back to face, center to center, and other measurements required to construct the pipe fittings.
The document provides specifications for various types of forged flanges that comply with ANSI B16.5 and ISO standards. It includes dimensional details like diameters, thicknesses, hole counts for different standard pipe sizes ranging from 1/2 inch to 24 inches. Flange types include slip-on, welding neck, blind, and lap joint. Dimensions are in millimeters and specifications are provided for 150 psi and 300 psi pressure classes.
The document contains tables with specifications for pipe flanges including:
- Nominal pipe diameter in mm
- Diameter and number of bolts for the flange
- Diameter of the bolt circle
- Thickness of bolts and flanges
It provides this information for standard pipe sizes ranging from 15 mm to 600 mm diameter. The tables include specifications that comply with British Standard 10.
The document contains specifications for forged steel flanges in accordance with ANSI B16.5 standards. It provides the dimensions for various types of flanges for pipe sizes ranging from 1/2 inch to 24 inches. Flange dimensions include the diameter, bolt hole circle diameter, number of bolts, thickness, and other parameters. Flanges are available in 150 psi and 300 psi pressure classes.
This document summarizes key specifications from various ASTM standards for stainless steel tubes and pipes. It provides allowable tolerances for outside diameter, wall thickness, length, and testing requirements for different material sizes under standards including ASTM A-270, A-249, A-312, A-269, A-213, A-268, and A-358. The table lists specification details like diameter ranges, diameter and thickness variation limits, length tolerances, and mandated test procedures for each standard based on material size.
This document provides a table listing the nominal thickness and weights of stainless steel pipes of various sizes according to ANSI B36-10 pipe dimension standards. It includes the nominal outside diameter in both mm and inches, as well as the thickness and weight in kg/m for schedules 5S through 60. Pipes range in size from 1/8 inch to 36 inches in diameter. The table notes that thickness and weights for extra-strong and double extra-strong standards can be found in corresponding schedule values, and a formula is provided for calculating weights for different thicknesses.
This document provides a table listing the nominal thickness and weights of stainless steel pipes of various sizes, from 1/8" to 36" in diameter, and schedules 5S through 60. For each size and schedule, it gives the outside diameter in both mm and inches, as well as the weight in kg/m. It notes that thicknesses and weights for standard extra-strong and double extra-strong pipes can be found using a corresponding schedule. The table provides a reference for determining the standard dimensions and weights of stainless steel pipes according to ANSI B36.10 specifications.
Investing in land has several benefits: it is easy to invest in, has low risk, provides ownership and control over price. There are also options to either pay in full or through installments over 48 months, with the company offering to buy back the plot at double the rate. The document promotes a land development project in Pali, noting its proximity to beaches, forts and other attractions. It highlights factors considered like affordable prices and EMIs, plans for residential development, and infrastructure with roads. The project offers facilities like a clubhouse, pools, cottages and gardens for rejuvenation.
Yellow Chilli is a reputed food chain in the hospitality industry endorsed by famous chef Sanjeed Kapoor. They offer a variety of exotic dishes and an in-house bar. Yellow Chilli trusted Fireman India Security Solutions to implement a CCTV surveillance project at their Pune, Maharashtra restaurant, installing four high-resolution day and night cameras along with a Digital Video Recorder.
This document discusses different types of partitions including classroom partitions used to divide classrooms, industrial partitions for warehouses and factories, mall partitions to create separate areas in shopping centers, partitions with staggered joints to join panels at different heights, and toilet partitions to separate bathroom stalls.
The document lists various types of prefabricated structures that could be constructed including bungalow out houses, farm houses, hotel cottages, labour colonies, rooms on terraces, sample flats, site offices, and site office interiors. It also mentions mazzenine flooring and schools and colleges.
PCS Corporation manufactures plastic moulds and components. It has moderate performance capability and financial strength. Key strengths include the proprietor's 10 years of experience and established supplier relationships. Risks include weak organization structure and systems, geographic concentration, raw material price volatility, and weak margins. Financials show increasing sales and profits over the past three years due to higher orders and manufacturing commencement in 2011-12. However, organization and financial risks remain.
This document provides an introduction and overview of S R Home Appliances Pvt. Ltd., an Indian company that manufactures water treatment plants and partners with other companies like Prakruti Environmental Engineers. It summarizes the types of plants manufactured like purified water plants, waste water treatment plants, reverse osmosis plants, and lists the industries served. Key aspects of quality assurance and some client examples are also briefly mentioned.
This document provides dimensional standards for butt welding pipe fittings according to ANSI B-16.9, B-16.28, and MS SS P43 standards. It includes specifications for 90 degree elbows and 180 degree return bends in short radius configurations for various nominal pipe sizes from 1/2 inch to 36 inches. Charts list dimensions for outside diameter, center to face, back to face, center to center, and other measurements required to construct the pipe fittings.
The document provides specifications for various types of forged flanges that comply with ANSI B16.5 and ISO standards. It includes dimensional details like diameters, thicknesses, hole counts for different standard pipe sizes ranging from 1/2 inch to 24 inches. Flange types include slip-on, welding neck, blind, and lap joint. Dimensions are in millimeters and specifications are provided for 150 psi and 300 psi pressure classes.
The document contains tables with specifications for pipe flanges including:
- Nominal pipe diameter in mm
- Diameter and number of bolts for the flange
- Diameter of the bolt circle
- Thickness of bolts and flanges
It provides this information for standard pipe sizes ranging from 15 mm to 600 mm diameter. The tables include specifications that comply with British Standard 10.
The document contains specifications for forged steel flanges in accordance with ANSI B16.5 standards. It provides the dimensions for various types of flanges for pipe sizes ranging from 1/2 inch to 24 inches. Flange dimensions include the diameter, bolt hole circle diameter, number of bolts, thickness, and other parameters. Flanges are available in 150 psi and 300 psi pressure classes.
This document summarizes key specifications from various ASTM standards for stainless steel tubes and pipes. It provides allowable tolerances for outside diameter, wall thickness, length, and testing requirements for different material sizes under standards including ASTM A-270, A-249, A-312, A-269, A-213, A-268, and A-358. The table lists specification details like diameter ranges, diameter and thickness variation limits, length tolerances, and mandated test procedures for each standard based on material size.
This document provides a table listing the nominal thickness and weights of stainless steel pipes of various sizes according to ANSI B36-10 pipe dimension standards. It includes the nominal outside diameter in both mm and inches, as well as the thickness and weight in kg/m for schedules 5S through 60. Pipes range in size from 1/8 inch to 36 inches in diameter. The table notes that thickness and weights for extra-strong and double extra-strong standards can be found in corresponding schedule values, and a formula is provided for calculating weights for different thicknesses.
This document provides a table listing the nominal thickness and weights of stainless steel pipes of various sizes, from 1/8" to 36" in diameter, and schedules 5S through 60. For each size and schedule, it gives the outside diameter in both mm and inches, as well as the weight in kg/m. It notes that thicknesses and weights for standard extra-strong and double extra-strong pipes can be found using a corresponding schedule. The table provides a reference for determining the standard dimensions and weights of stainless steel pipes according to ANSI B36.10 specifications.