Ambar Marijan completed a job training program in 2011 at Adikarya Selogiri in Wonogiri where he learned various metalworking skills. He cut steel plates, made screws, drilled holes of various sizes, turned iron on a lathe, welded plates, and milled plates to specifications. While some tasks like cutting plates and drilling holes went well, others such as welding and milling plates were less satisfactory. Overall, Ambar gained valuable work experience and metalworking skills during the program.

1. JOB ON TRAINING INDUSTRY
AT ADIKARYA SELOGIRI
WONOGIRI IN 2011
AMBAR MARIJAN
XII TP

2. MY ACTIVITIES
• Cutting the plate iron with length 100 cm
• Make thread of a screw with diameter 14 cm
• Drill the plate iron with diameter 19 cm,7 cm,13
cm and 22 cm
• Lathe the iron with diameter 19 cm become
diameter 14 cm
• Welding two the plate iron with length 15 cm
• Milling the plate iron agree with size

3. Cutting the plate iron with length
100 cm
• 2 people
• A half hour
• Size long less

4. Make thread of a screw with
diameter 14 cm
• 4 people
• Two days
• The

5. Drill the plate iron with diameter 19
cm,7 cm,13 cm and 22 cm
• 3 people
• One day
• The result is good and right size

6. Lathe the iron with diameter 19 cm
become diameter 14 cm
• 5 people
• Two days
• Turning pretty good result

7. Welding two the plate iron with
length 15 cm
• 4 people
• Two days
• Unsatisfactory welding result

8. Milling the plate iron agree with size
• 4 people
• Three days
• Size less than maximum

9. conclusion
After I job on training industry at Adikarya
selogiri wonogiri in 2011 here,I get a lot of
skill on iron lathe,drill steel plate,cut some
metal and of course here I also received a
lot of work experience machining
techniques.

10. GOOD BYE