2010 cia-catalog

Nationally Accredited CIC Certifications and
Authorized Practical Examiner Training . . . . .2-3

Training Programs:
Mobile Crane . . . . . . . . . . . . . . . . . . . . . .5-7, 9
Boom Truck . . . . . . . . . . . . . . . . . . . . . . . . . .8
Tower Crane . . . . . . . . . . . . . . . . . . . . . . . . .10
Overhead Crane . . . . . . . . . . . . . . . . . . . . . .11
Rigger/Signalperson . . . . . . . . . . . . . . . . .12-13
Aerial Lift . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Forklift . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Train-The-Trainer . . . . . . . . . . . . . . . . . . . . .16
Products:
Safety Training Videos . . . . . . . . . . . . . . .17-19
Field Guides/Handbooks/Manuals . . .20-21, 23
Standards & Checklists . . . . . . . . . . . . . . . . .22
Crane & Lift Equipment Models . . . . . . . .24-25
Safety Cards & More . . . . . . . . . . . . . . . .26-29

Registration & Product Order Form . . . . . . .30-31

CIC Crane Operator Certifications

Written & Practical Exam Dates
Crane Institute of America is a CIC-approved test site that
administers written and practical exams for mobile crane
operators at our Orlando facility on the following dates:

Jan.-June 2010 July-Dec. 2010
Written Practical Written Practical
January 8 January 9 July 15 July 16
January 14 January 15 August 5 August 6
February 4 February 5 September 17 September 18
March 5 March 6 September 23 September 24
CIC Crane Operator and March 11 March 12 October 8 October 9
April 16 April 17 October 14 October 15
Rigger/Signalperson April 22 April 23 November 5 November 6
Certifications are Accredited May 7 May 8 November 11 November 12
May 13 May 14 December 3 December 4
by NCCA! June 11 June 12 December 9 December 10
June 17 June 18

Become a Nationally Accredited To register for CIC Crane Operator
CIC Certified Crane Operator Certification Exams, go online to www.CICcert.com
or call (763) 476-4242
CIC operator certifications meet state and federal OSHA
requirements and will meet the proposed OSHA regulation
mandating accredited crane operator certification. Operator Become an Authorized
certification is offered on the following types of mobile cranes: CIC Practical Examiner for
• Telescoping Boom up Mobile Cranes
to 21 ton To be authorized as a
• Telescoping Boom 21 CIC Mobile Crane
to 75 ton Practical Examiner, the
• Telescoping Boom over examiner-candidate
75 ton must participate in a
• Lattice Boom Carrier CIC Practical Examiner
Mounted training session. CIC is
• Lattice Boom Crawler offering Practical
Mounted Examiner training on:

Advantages of CIC Certifications 2010 Practical Examiner Training Dates

• Fewer written exams Orlando, FL Jan. 5-7 Orlando, FL July 13-15
Orlando, FL Feb. 9-11 Orlando, FL Aug. 10-12
• One practical exam for up to (5) certifications Orlando, FL March 9-11 Orlando, FL Sept. 14-16
• Less expensive Orlando, FL April 13-15 Orlando, FL Oct. 12-14
• Online or written exams Orlando, FL May 4-6 Orlando, FL Dec. 14-16
• Calculators allowed during exams Orlando, FL June 8-10
• Test questions relevant to the job

Operator Re-Certification CIC prep training and written and practical exams can
also be administered on-site at your facility (see pages
Re-certification is available to operators currently certificated 6 & 7). For more information call (800) 832-2726.
through an accredited program. For your convenience written or
online re-certification exams are available at multiple locations in
virtually every community nationwide.

2 Crane Institute of America • 800 832-2726 • www.craneinstitute.com

CIC Rigger/Signalperson Certifications

Become a Nationally Accredited To register for CIC Rigger/Signalperson
Exams, go online to www.CICcert.com or call
CIC Certified Rigger/Signalperson (763) 476-4242
CIC rigger/signalperson certifications meet
state and federal OSHA requirements and will
meet the proposed OSHA regulation Introductory
Price
mandating accredited basic
rigger/signalperson. $99
Advantages of CIC Certifications
• Fewer written exams
• One practical exam for
two certifications
• Less expensive
• Online or written exams
• Test questions relevant to
the job

Written & Practical Exam Dates CIC prep training and written and practical exams can
Crane Institute of America is a CIC-approved test site that adminis- also be administered on-site at your facility (see page
ters written and practical exams for rigger/signalpersons at our 12). For more information call (800) 832-2726.
Orlando facility.
Training: CIC Certification:

2010 Basic Rigger/Signalperson (800) 832-2726 (763) 476-4242
Exam Dates www.craneinstitute.com www.CICcert.com

July 20
January 26
February 23 August 24 Coming Soon!
March 23 September 14
April 20 October 19
Advanced Rigger and Lift Director accredited certifications are
May 18 November 16 currently being developed and will be available in 2010.
June 22 December 14

Become a CIC Test Site
CIA’s testing center. CIC operator and rigger/signalperson practical exams are quick
and easy to set-up while providing a complete and valid measure-
ment of the operator’s and signalperson’s practical skill.
For more information call (763) 476-4242
or go online to www.CICcert.com.

Crane Institute of America • 800 832-2726 • www.craneinstitute.com 3

The Standard in Training Programs

MOBILE CRANES • BOOM TRUCKS • OVERHEAD CRANES • GANTRY CRANES & HOISTS
MARINE/OFFSHORE CRANES • PEDESTAL CRANES • RIGGING
AERIAL LIFTS • FORKLIFTS • TRAIN-THE-TRAINER

Hands-On Training in Orlando Training at Locations Near You
At Crane Institute’s 5-acre facility near Orlando, Florida, our Conscientious employers are taking advantage of Crane Institute’s
instructor’s conduct hands-on training on mobile cranes, industrial powerful, time-proven training programs. Our nationally scheduled
cranes, boom trucks and rigging equipment. Our hands-on pro- open-enrollment programs are ideal for individuals as well as
grams are excellent for trainees or as a refresher for experienced corporate or government entities desiring training for specific
personnel. We cover all the bases, from pre-op inspection to setup personnel. Programs are conveniently scheduled at 33 locations
to operation to shutdown. throughout the U.S. For dates, see pages 5-16!
Our building block approach to training is unlike any available
today. Students move from the classroom to the crane On Site at Your Facility
simulator to actual operation of equipment, acquiring the
practical skills they’ll need on the job. This “building-block” All of our training programs can be brought directly to your job
technique enables students to learn the skills much quicker than site. Each training program is customized to your company’s
through other methods of training, and with proven results. specific lifting and rigging equipment requirements. Instructors
can conduct hands-on training with your equipment at your job
site. Call (800) 832-2726 for a cost proposal.
Training Benefits
• Reduce accident potential FREE! Crane Institute of America
• Reduce liability exposure Video DVD with purchase of an on-site
• Reduce insurance rates
training program!
• Boost worker morale
• Create an attitude of safety
• Comply with OSHA and Industry standards


Managing Crane Safety
CERTIFICATE OF TRAINING A fast paced program loaded with exercises and workshops designed to
A Certificate of Training suitable for framing is awarded to each enable you to improve crane safety and management back on the job.
participant upon successful completion of training program.
You will learn solid, factual and usable information that will enable you to
comply with OSHA and Industry standards, prevent accidents, limit your
liability exposure and provide maximum job site safety. You will also
receive hands-on instruction on our mobile crane simulator at Orlando
programs.

2 Days $595
CRANES AND RIGGING COVERED
• Telescoping Boom Cranes
• Lattice Boom Cranes
• Boom Trucks
• Industrial Cranes
• Construction and Industrial Rigging

TOPICS COVERED
• Management’s role in hazard awareness, elimination & mitigation.
• Why Cranes present such potential for accidents.
• How to reduce your liability exposure.
• Understanding how cranes have changed.
• How to interpret load charts.
• Selecting operational aids.
• Inspection requirements and record keeping.
• How to set-up a crane inspection program.
• New ASME document on owner, user, supervisor, lift director, and
operator responsibilities.
• How to train and certify your crane operators.
2010 Schedule • Applying OSHA and ASME standards to your workplace.
• Where we stand on OSHA’s new operator certification requirement.
Houston, TX Jan. 12-13 Salt Lake City, UT July 13-14 • Hoisting personnel with cranes.
Pittsburgh, PA Feb. 2-3 Nashville, TN Aug. 3-4 • The most common unsafe crane and rigging practices.
Chicago, IL March 9-10 Orlando, FL Sept. 20-21
• Rigging equipment and procedures.
Orlando, FL March 15-16 Dallas, TX Sept. 21-22
• How to plan a critical lift.
Birmingham, AL April 13-14 Baton Rouge, LA Oct. 19-20
New York City, NY May 11-12 Orlando, FL Nov. 1-2
Milwaukee, WI June 15-16 Charlotte, NC Nov. 9-10 YOU WILL RECEIVE
Orlando, FL June 21-22 Newark, NJ Dec. 14-15
• Managing Crane Safety workbook
• Mobile Cranes handbook
• Rigging handbook
• Crane safety reference card

22
• Rigging safety reference card
• Safety decal
• Hoisting personnel safety reference card
• Applicable OSHA and ASME standards
Years of • Pre-operational inspection checklists

Excellence • Annual inspection checklists, load
chart worksheets, critical lift plan,
hoisting personnel plan, and
much more!


Mobile Crane Operator
TELESCOPING & LATTICE BOOM CRANES • BOOM TRUCKS • INDUSTRIAL CRANES

A safety program ideal for operators, supervisors
and other personnel who require a thorough Excellent preparation for taking CIC
knowledge of mobile crane operation and safety. certification exams and becoming a nationally
accredited certified Mobile Crane Operator!

3 Days $895
Free Operator Qualification Certificate!
YOU WILL LEARN
• Causes & results of mobile crane accidents.
• Types, components & terminology of mobile cranes.
• How mobile cranes are rated.
• How to interpret and use load charts.
• Pre-lift considerations.
• Set-up and site considerations.
• Safe operating practices and procedures.
• ASME B30.5 - operator, rigger, and supervisory responsibilities.
• How to perform pre-operational inspections.
• How to conduct pick & carry operations safely.
• How to prepare for a critical lift.
• Procedures for boom/jib assembly/disassembly.
• Correct hand signals & responsibility of signalpersons.
• Procedures for safely working cranes near power lines.
• How to comply with OSHA when hoisting personnel with mobile cranes.
• Basic rigging procedures: wire rope, slings, hardware, lifting devices, etc.
Simulator Training Included
with all Orlando Classes
2010 Schedule YOU WILL RECEIVE
Anchorage, AK Jan. 5-7 Guam June 7-9 • Mobile Crane Safety workbook
Orlando, FL Jan. 11-13 San Antonio, TX June 8-10
• Mobile Cranes handbook
Las Vegas, NV Jan. 12-14 Orlando, FL June 14-16
Denver, CO Jan. 19-21 Orlando, FL July 12-14
Pittsburgh, PA Jan. 26-28 Baltimore, MD July 13-15 • Rigger's capacity card
Orlando, FL Feb. 1-3 Savannah, GA July 20-22 • Hand signal card
Seattle, WA Feb. 2-4 Kansas City, KS July 27-29 • Safety decals
Minneapolis, MN Feb. 9-11 Charlotte, NC July 27-29
• Certificate of training
Houston, TX Feb. 16-18 Orlando, FL Aug. 2-4
Nashville, TN Feb. 23-25 Milwaukee, WI Aug. 10-12 • Operator qualification card, if applicable
Chicago IL March 2-4 Philadelphia, PA Aug. 31-Sept. 2
Orlando, FL March 8-10 Houston, TX Aug. 31-Sept. 2
Charleston, WV March 9-11 Nashville, TN Sept. 14-16
St. Louis, MO March 16-18 Orlando, FL Sept. 20-22
Phoenix, AZ March 23-25 Columbus, OH Sept. 21-23
Sacramento, CA April 6-8 Portland, OR Sept. 28-30
Albuquerque, NM April 13-15 Baton Rouge, LA Oct. 5-7
Orlando, FL April 19-21 Orlando, FL Oct. 11-13
Birmingham, AL April 20-22 Birmingham, AL Oct. 12-14
Salt Lake City, UT April 20-22 Orlando, FL Nov. 8-10 An operator qualification certificate is available to those operators who
Newark, NJ April 27-29 Atlanta, GA Nov. 16-18
Little Rock, AR May 4-6
meet the physical, written and experience requirements.
Buffalo, NY Nov. 30-Dec. 2
Orlando, FL May 10-12 Orlando, FL Dec. 6-8
Tulsa, OK May 11-13 Dallas, TX Dec. 7-9
Honolulu, HI May 25-27


Mobile Crane Operator, Hands-On
TELESCOPING & LATTICE BOOM CRANES • BOOM TRUCKS • INDUSTRIAL CRANES

STEP 1 Excellent preparation for taking CIC
certification exams and becoming a nationally
TECHNICAL accredited certified Mobile Crane Operator!
CLASSROOM
TRAINING
Classroom instruction in the
technical aspects of mobile
crane operation with Basic Program
4 Days $995
emphasis on safety, load
charts, setup and operating practices.

STEP 2 Free Operator Qualification Certificate!
CRANE 3 Days Classroom
SIMULATOR
TRAINING
1 Day Hands-On
You can begin to apply the Our basic 4-day program is an excellent introduction for beginners or
technical information learned occasional operators, and a perfect refresher for experienced operators.
in the classroom using our It’s also a great opportunity for supervisors, safety personnel and anyone
realistic crane simulator. else who wants to experience what it is like to operate a crane.
Learn the principals of actual crane operation in a safe
environment without the fear of having an accident. In addition to 3 days of classroom training, this program includes
1 day of intensive hands-on instruction covering the following areas:
STEP 3 • Causes & results of mobile crane accidents.
HANDS-ON • Types, components & terminology of mobile cranes.
TRAINING • How mobile cranes are rated.
After satisfactory completion • How to interpret and use load charts.
of both classroom and • Pre-lift considerations.
simulation training, get behind • Set-up and site considerations.
the controls of an actual • Safe operating practices and procedures.
crane. Develop and improve • ASME B30.5 - operator, rigger, and supervisory responsibilities.
your operating skills in the unique setting of our 5-acre • How to perform pre-operational
“hands-on” training site. inspections.
• How to conduct pick & carry
operations safely.
• Procedures for boom/jib
assembly/disassembly.
2010 Schedule • Correct hand signals &
responsibility of signalpersons.
Orlando, FL Jan. 4-7 Orlando, FL Sept. 13-16 • Procedures for safely working
Orlando, FL March 1-4 Orlando, FL Oct. 4-7 cranes near power lines.
Orlando, FL April 12-15 Orlando, FL Nov. 1-4 • How to comply with OSHA when
Orlando, FL May 3-6 Orlando, FL Nov. 29-Dec. 2 hoisting personnel with mobile
Orlando, FL June 7-10 cranes.
• Basic rigging procedures: wire
rope, slings, hardware, lifting
devices, etc.

An operator qualification certificate is available to those operators
who meet the physical, written and experience requirements.


Boom Truck Operator, Hands-On
Classroom and hands-on instruction specifically Excellent preparation for taking CIC
designed to train personnel to safely operate a certification exams and becoming a nationally
boom truck. This program offers a qualification
certificate ensuring that beginners or experienced
accredited certified Boom Truck Operator!
personnel meet or exceed OSHA and ASME
requirements.
5 Days $1,295
HANDS-ON TRAINING Free Operator Qualification Certificate!
3 Days Classroom
2 Days Hands-On

YOU WILL LEARN
• Causes & results of crane accidents.
• Types, components & terminology of boom trucks.
• How boom trucks are rated.
• How to interpret and use load charts.
• Set-up and site considerations.
• ASME B30.5 - operator, rigger, and supervisory responsibilities.
• How to perform pre-operational inspections.
• Procedures for erecting and stowing jibs.
• Correct hand signals & responsibility of signalpersons.
• Procedures for safely working boom trucks near power lines.
• How to comply with OSHA when hoisting personnel with boom trucks.

HANDS-ON
• Pre-operational inspection
• Proper boom truck setup
• How to install & reeve load blocks & headache balls
• Principles of boom truck operation
• How to control load swing
• Safety devices & operational aids
• How to stow & erect extensions & jibs
• Start-up and shutdown

YOU WILL RECEIVE
2010 Schedule
• Boom Truck Operator workbook
Orlando, FL Jan. 18-22 Orlando, FL July 26-30 • Mobile Cranes handbook
Orlando, FL April 26-30 Orlando, FL Oct. 18-22 • Rigging handbook
• Pre-operational inspection forms
• Rigger's capacity card
• Hand signal card
• Safety decals
An operator qualification certificate is available to • Certificate of training
those operators who meet the physical, written and • Operator qualification card, if
applicable
experience requirements.


Mobile Crane Inspector & Certification
TELESCOPING BOOM CRANES • LATTICE BOOM CRANES • BOOM TRUCKS • INDUSTRIAL CRANES (CARRY DECKS)
This program enables companies to perform their
own in-house crane inspections, which include the
OSHA required Monthly and Annual Inspections as 4 Days $995
well as the ASME Periodic Inspections.
Inspector Certification $295
Training and certification also ensure that
inspectors meet the OSHA and ASME competency
Sign up 2, get 3rd tuition free!*
and qualification requirements.
YOU WILL LEARN
• How to inspect your mobile cranes in-house.
• How to set up a mobile crane inspection program.
• What constitutes a competent and qualified mobile crane inspector.
• How to identify individual components.
• Understanding and applying the three levels of inspection.
• OSHA and ASME mobile crane inspection requirements.
• The role of mobile crane inspectors in reducing crane accidents & liability
exposure.
• How to interpret & apply OSHA & ASME crane safety standards.
• Inspection procedures and techniques.
• How to recognize immediate and potential hazards.
• How to interpret load charts when performing a load test.
• How to select the correct rigging equipment when performing a load test.
• The correct way to write inspection reports.
• When to perform a non-destructive crack detection test.
• How to inspect structural components, booms, jibs, gears, drums, sheaves,
blocks, hooks, operating mechanisms, hydraulic and pneumatic systems,
hydraulic cylinders, wire rope, operational aids, etc.

YOU WILL RECEIVE
• Mobile Crane Inspector workbook
• OSHA & ASME standards
• Monthly wire rope & hook
inspection forms
• Periodic & annual inspection forms
for boom trucks, lattice and
Hands-On Training included telescoping boom cranes
in all Orlando Programs! • Sheave gauge
2010 Schedule • Inspection certificate decal
Orlando, FL Jan. 12-15 San Antonio, TX June 15-18
Anchorage, AK Jan. 12-15 Guam June 21-24 • Hand signal card
Pittsburgh, PA Jan. 19-22 Savannah, GA July 13-16 • Safety decals
Las Vegas, NV Jan. 19-22 Baltimore, MD July 20-23
Denver, CO Jan. 26-29 Kansas City, KS July 20-23
Hartford CT Feb. 2-5 Orlando, FL July 27-30 • Inspector certification card, if
Seattle, WA Feb. 9-12 Charlotte, NC Aug. 3-6 applicable
Orlando, FL Feb. 16-19 Milwaukee, WI Aug. 17-20
Minneapolis, MN Feb. 16-19 Houston, TX Aug. 24-27
Houston, TX Feb. 23-26 Nashville, TN Sept. 21-24 INSPECTOR CERTIFICATION REQUIREMENTS
Salt Lake City, UT March 2-5 Columbus, OH Sept. 28-Oct. 1
Chicago, IL March 9-12 Portland, OR Oct. 5-8 • Complete a Crane Institute of America Mobile Crane Inspector training program.
Charleston, WV March 16-19 Anchorage, AK Oct. 12-15 • Pass a written examination.
Phoenix, AZ March 16-19 Philadelphia, PA Oct. 19-22
• Have three (3) years experience working in a capacity of operation,
St. Louis, MO March 23-26 Orlando, FL Oct. 26-29
Orlando, FL April 13-16 Baton Rouge, LA Oct. 26-29
maintenance, repair, inspection, safety or supervision with telescoping and/or
Nashville, TN April 20-23 Atlanta, GA Nov. 9-12 lattice boom cranes.
Birmingham, AL April 27-30 Seattle, WA Nov. 16-19 A trainee certification is available for personnel who do not meet
Newark, NJ May 11-14 Dallas, TX Nov. 30-Dec. 3 inspector experience requirements.
Tulsa, OK May 18-21 Buffalo, NY Dec. 7-10
Honolulu, HI June 1-4 Orlando, FL Dec. 14-17
*See registration details on page 31.


Tower Crane Operator & Inspector Certification
SELF-ERECTING • HAMMERHEAD TOWER CRANES • LUFFING TOWER CRANES
After completion of this training and certification

4 Days $995
program, operators and inspectors will meet the
OSHA and ASME competency and qualification
requirements.

Also, this program enables companies to perform
Operator Certification $95
their own in-house crane inspections, which Inspector Certification $295
include the OSHA required Daily, Monthly and
Annual Inspections as well as the ASME Periodic YOU WILL LEARN
Inspections.
• Causes and results of tower crane accidents.
2010 Schedule • Types, components, and terminology of tower cranes.
• Understanding and using rated capacity charts.
Orlando, FL Feb . 23-26 Orlando, FL Aug. 31-Sept. 3
Orlando, FL June 29-July 2
Orlando, FL Nov. 30-Dec. 3
• Operator, rigger and supervisor responsibilities.
• Hand signals, radios and other ways to direct the crane operator.
• Procedures for safely working tower cranes around power lines.
• How to comply with OSHA’s requirements when hoisting personnel.
• What constitutes a competent and qualified tower crane inspector.
• How to inspect your tower cranes in-house.
• OSHA and ASME tower crane inspection requirements.
• The role of tower crane inspectors in reducing crane accidents & liability
exposure.
• How to interpret & apply OSHA & ASME tower crane standards.
• How to inspect structural components, booms, jibs, gears, drums, sheaves,
blocks, hooks, operating mechanisms, electrical system, power plants,
braking systems, hydraulic and pneumatic systems, safety devices and
operational aids.

YOU WILL RECEIVE
• Tower Crane Safety &
Inspector workbook
• OSHA & ASME standards
OPERATOR CERTIFICATION REQUIREMENTS • Periodic & annual inspection
• Pass a physical examination. A CDL physical is acceptable. forms
• Complete a Crane Institute of America Tower Crane Operator & • Hand signal card
Inspector training program. • Rigger's capacity card
• Pass a written examination. • Sheave gauge
• Have a minimum of 2 years operating experience. • Inspection certificate decal
• Safety decals
INSPECTOR CERTIFICATION REQUIREMENTS • Certificate of training
• Complete a Crane Institute of America Tower Crane Operator • Inspector and operator
& Inspector training program. certification card, if
applicable
• Pass a written examination.
• Have 3 years experience working in a capacity of operation,
maintenance, repair, inspection, safety or supervision of
tower cranes.
A trainee certification is available for personnel who do
not meet operator/inspector experience requirements.


Overhead Crane Safety & Inspector Certification
CAB OPERATED • PENDANT OPERATED • REMOTE CONTROL OPERATED
For operators, inspectors and other personnel who
require a thorough knowledge of overhead and
gantry cranes, monorail systems and hoists. This 4 Days $995
program enables companies to perform their own
in-house crane inspections, which include the OSHA Operator Certification $95
required Monthly and Periodic Inspections. Training
and certification also ensure that operators and Inspector Certification $295
inspectors meet the OSHA and ASME competency
and qualification requirements. Sign up 2, get 3rd tuition free!*
YOU WILL LEARN
• Causes & results of overhead crane accidents.
• Types, components and terminology of overhead cranes.
• How to give correct hand signals and responsibilities of signal persons.
• How to control load swing.
• Operator, rigger and supervisor responsibilities.
• Rigging: wire rope, slings, chain, rigging hardware, lifting devices,
calculating sling loading, determining load weight, safe rigging practices
and procedures and how to prepare a lift plan.
• How to perform daily, monthly and periodic inspections.
• The role of inspectors in reducing overhead crane accidents and liability
exposure.
• How to interpret & apply OSHA & ASME overhead crane safety standards.
2010 Schedule • Inspection procedures, techniques & checklists.
• Record-keeping requirements and the correct way to write inspection
Pittsburgh, PA Jan. 5-8 Detroit, MI June 15-18 reports.
Orlando, FL Jan. 26-29 Guam June 16-18
• Selecting the right inspection tools for the job.
Anchorage, AK Feb. 9-12 Charleston, WV June 29-July 2
Buffalo, NY Feb. 16-19 Chicago, IL Aug. 10-13 • How to perform overhead crane load tests following ASME procedures.
Seattle, WA Feb. 23-26 Louisville, KY Aug. 24-27 • How to select correct rigging when performing a load test.
Denver, CO March 2-5 Pittsburgh, PA Sept. 14-17 • How to inspect bridges, end trucks, trolleys, runways, rails, footwalks,
Orlando, FL March 16-19 Columbus, OH Oct. 19-22 gears, drums, sheaves, blocks, hooks, operating mechanisms, control
Milwaukee, WI May 4-7 Newark, NJ Nov. 2-5
systems, braking systems, hydraulic & pneumatic components, electrical
Orlando, FL May 11-14 Dallas, TX Nov. 9-12
equipment, safety devices & operational aids, etc.
Newark, NJ May 25-28 Orlando, FL Nov. 16-19
Houston, TX June 8-11 Minneapolis, MN Dec. 14-17
YOU WILL RECEIVE
OPERATOR CERTIFICATION REQUIREMENTS
• Overhead Crane Safety &
• A doctor’s statement for a recent physical examination. Inspector workbook
(Applicable to cab operated cranes only.) • Rigging handbook
• Complete a Crane Institute of America Overhead Crane Safety • Annual/periodic & monthly
& Inspector training program.
inspection checklists
• Sheave gauge
• Have a minimum of 2 years operating experience.
INSPECTOR CERTIFICATION REQUIREMENTS • Inspection certificate decal
• Complete a Crane Institute of America Overhead Crane Safety • Hand signal card
& Inspector training program. • Safety decals
• Pass a written examination. • Certificate of training
• Have 3 years experience working in a capacity of operation, • Certification card, if applicable
maintenance, repair, inspection, safety or supervision with
overhead cranes.
A trainee certification is available for personnel who do
not meet operator/inspector experience requirements.
*See registration details on page 31.


Rigger/Signalperson

An excellent training program for Excellent preparation for taking CIC
construction, industrial and maintenance certification exams and becoming a nationally
craftsmen who use rigging equipment to accredited certified Rigger/Signalperson!
perform their jobs.

2 Days $595
Nationally Accredited
CIC Rigger/Signalperson
Certification - Introductory Offer $99
YOU WILL LEARN
• How to properly use wire rope, chain and synthetic web slings,
rigging hardware, and lifting devices.
• How to interpret capacity charts for wire rope, slings and rigging
hardware when performing proof test.
• The three methods used to calculate sling loading.
• Safe rigging practices and procedures.
• The correct way to give ASME hand signals & voice signals.
• ASME responsibilities of signalpersons.
• Procedures for safely working cranes near power lines.
• How to interpret and comply with OSHA’s steel erection standard.
• How to comply with OSHA requirements when hoisting personnel
with cranes.
• How to perform a pre-use inspection on wire rope, chain and
synthetic web slings, hooks, shackles, eye bolts, hoist rings,
2010 Schedule turnbuckles, spreader/lifting beams, load blocks, sheaves, etc.
• How to determine the weight of a load.
Orlando, FL Jan. 25-26 Orlando, FL July 19-20
Orlando, FL Feb. 22-23 Orlando, FL Aug. 23-24 • How to prepare a lift plan.
Orlando, FL March 22-23 Orlando, FL Sept. 13-14 • How to properly use hoists, chain falls and come-alongs.
Orlando, FL May 17-18 Orlando, FL Nov. 15-16
Orlando, FL June 21-22 Orlando, FL Dec. 13-14
YOU WILL RECEIVE
*Rigger/Signalperson & Rigging Equipment Inspector (pg. 13)
programs are scheduled on consecutive days so you can attend • Rigging Safety
both programs in one week! workbook
• Rigging safety reference
card
• Rigger’s capacity card
• Overhead crane hand
signal card
• Sheave gauge
• Safety decals
Coming Soon! • Certificate of Training
Advanced Rigger and Lift Director certifications are • Rigger qualification card,
currently being developed and will be available in 2010. if applicable.


Rigging Equipment Inspector & Certification
WIRE ROPE • SLINGS • HARDWARE • PROOF TESTING

Participants will learn how to inspect all types
of rigging equipment in accordance with OSHA 3 Days $795
and ASME requirements. Inspector certification
will ensure that the inspector is competent and Inspector Certification $295
qualified.
YOU WILL LEARN

HANDS-ON TRAINING • How to set up a rigging equipment inspection program.
• How to identify individual components of rigging equipment.
• The role of rigging equipment inspectors in reducing crane and rigging
accidents and liability exposure.
• How to perform a pre-use, frequent and periodic inspection of rigging
equipment.
• Inspection procedures and techniques.
• How to perform rated load tests or proof tests.
• How to inspect wire rope, chain and synthetic web slings, hooks, shackles,
eye bolts, hoist rings, turnbuckles, spreader/lifting beams, load blocks,
sheaves, hoists, chain falls and come-alongs.
• Hands-on training on the inspection of wire rope, chain and synthetic slings.
• Hands-on training on the inspection of rigging hardware.

YOU WILL RECEIVE
• Rigging Equipment Inspector
workbook
• Periodic/annual inspection forms
for wire rope, chain slings,
chainfalls and come-alongs
• Rigger’s capacity card
• Sheave guage
• Inspection certificate decal
• Safety decals
2010 Schedule
Orlando, FL Jan. 27-29 Orlando, FL July 21-23 • Certification card, if applicable
Orlando, FL February 24-26 Orlando, FL Aug. 25-27
Orlando, FL March 24-26 Orlando, FL Sept. 15-17
Orlando, FL May 19-21 Orlando, FL Nov. 17-19
Orlando, FL June 23-25 Orlando, FL Dec. 15-17
INSPECTOR CERTIFICATION REQUIREMENTS
*Rigger/Signalperson & Rigging Equipment Inspector (pg. 12)
programs are scheduled on consecutive days so you can attend
• Complete a Crane Institute of America Rigging Equipment Inspector
both programs in one week! training program.
• Have 2 years experience working in a capacity of operation, maintenance,
repair, inspection, safety or supervision with rigging.

A trainee certification is available for personnel who do not meet
inspector experience requirements.


Aerial Lift Safety & Inspector Certification
VEHICLE-MOUNTED AERIAL LIFTS • BOOM-SUPPORTED AERIAL LIFTS • SCISSORS LIFTS

Designed for maintenance, construction craftsmen
and other personnel who require a thorough 3 Days $795
knowledge of aerial lift safety. This training and
certification program ensures that operators are Operator Certification $95
qualified and also enables companies to perform
their own aerial lift inspections in-house as Inspector Certification $295
required by OSHA and ANSI.
YOU WILL LEARN
2010 Schedule • Causes and results of aerial lift accidents.
Orlando, FL Feb. 10-12 Orlando, FL Sept. 1-3
• Different types of aerial lifts.
Orlando, FL April 7-9 Orlando, FL Dec. 8-10 • Types, components, and terminology of aerial lifts.
Orlando, FL July 14-16 • How to interpret and use rated capacity charts.
• How to select the right aerial lift for the job.
• Pre-use considerations and setup.
• Safe operating procedures.
• How to perform a pre-use, monthly and annual inspection.
• The aerial lift inspector's role in reducing accidents and liability exposure.
• How to interpret and apply OSHA and ANSI aerial lift safety standards.
• Inspection procedures, techniques and checklists that work.
• Understanding and applying the three levels of aerial lift inspection.
• How to comply with OSHA and ANSI recordkeeping requirements.
• When to "tag out" the aerial lift.
• Responsibilities of manufacturers, dealers, installers, owners, and users.
• How to inspect booms, structural components, gears, operating
mechanisms, functions and control systems, power plants, braking
systems, attachments, pins and shafts, hydraulic, electric and pneumatic
components, emergency safety devices and operator aids, etc.

YOU WILL RECEIVE
• Aerial Lift Safety & Inspector
OPERATOR CERTIFICATION REQUIREMENTS workbook
• Complete a Crane Institute of America Aerial Lift Safety
& Inspector training program. • Aerial Platform Safety Manual
• Pass a written examination. • Pre-operational inspection
checklists
• Have 6 months operating experience with aerial lifts.
• Annual/periodic inspection
checklists for vehicle-mounted
INSPECTOR CERTIFICATION REQUIREMENTS and boom-supported aerial lifts
and scissors lifts
• Complete a Crane Institute of America Aerial Lift Safety
& Inspector training program. • Rigger's capacity card
• Pass a written examination. • Sheave gauge
• Have 2 years experience working in a capacity of • Inspection certificate decal
operation, maintenance, repair, inspection, safety or • Safety decals
supervision with aerial lifts. • Certificate of training
• Certification card, if applicable
A trainee certification is available for personnel who
do not meet operator/ inspector experience
requirements.


Forklift Safety & Inspector Certification
INDUSTRIAL FORKLIFTS • ROUGH TERRAIN FORKLIFTS

Most personnel operating and working around
forklifts have had little or no quality training. This
training program exceeds OSHA’s new training
3 Days $795
requirements and enables companies to perform
their own OSHA and ASME daily and annual
Operator Certification $95
inspections in-house. Inspector Certification $295
YOU WILL LEARN
2010 Schedule • Causes and results of forklift accidents.
• Types, components and terminology of forklifts.
Orlando, FL Feb. 17-19 Orlando, FL Aug. 11-13 • How to interpret and use rated capacity charts.
Orlando, FL April 28-30 Orlando, FL Nov. 3-5 • Safe operating procedures.
• How to comply with OSHA standards when lifting personnel.
• How to perform a pre-use inspection.
• The role of the inspector in reducing forklift accidents and liability
exposure.
• How to set up your own forklift inspection program.
• Understanding and applying the three levels of forklift inspection.
• How to keep records that comply with OSHA and ITSDF standards.
• How to interpret and apply OSHA and ITSDF forklift safety standards.
• Selecting the right inspection tools for the job.
• Creating a safe site for inspecting forklifts.
• Inspection procedures, techniques and checklists.
• How to write inspection reports the correct way.
• Types, use, and inspection of forklift attachments.
• Rigging: slings, chain, rigging hardware, lifting devices, calculating sling
loading, determining load weight and safe rigging practices and
procedures.

YOU WILL RECEIVE
• Forklift Safety & Inspector
OPERATOR CERTIFICATION REQUIREMENTS workbook
• Forklifts handbook
• Complete a Crane Institute of America Forklift Safety &
Inspector training program. • Rigging handbook
• Pass a written examination. • Applicable OSHA and ITSDF
standards
• Have 1 year operating experience with forklifts.
• Pre-operational/annual industrial
and rough terrain lift truck
INSPECTOR CERTIFICATION REQUIREMENTS inspection checklists
• Complete a Crane Institute of America Forklift Safety &
Inspector training program. • Inspection certificate decal
• Safety decals
• Have 2 years experience working in a capacity of
operation, maintenance, repair, inspection, safety or • Certification card, if applicable
supervision with forklifts.

A trainee certification is available for personnel who
do not meet operator/inspector experience
requirements.


Train-The-Trainer Safety Training Programs
MOBILE CRANES • BOOM TRUCKS • OVERHEAD CRANES • RIGGING • AERIAL LIFTS • FORKLIFTS
Learn how to conduct the same training programs that
have made Crane Institute the most recognized and
successful training company in the business! These
Trainer Certification $345 (Classroom only)
valuable train-the-trainer programs are developed
specifically for companies desiring to establish or
upgrade their in-house training programs. Students who YOU WILL LEARN
successfully complete our Train-The-Trainer program may • How adults learn
apply for an additional credential as a Certified Trainer. • How to create a learning environment
• Be more effective with communication
• How to develop & implement a lesson plan
• How to develop visual aids & other training materials
• Training equipment & operation
• Deliver proficient instruction without lectures

TECHNICAL TOPICS
• Equipment components & terminology
• Safe practices & accident prevention
• Inspection procedures & record-keeping
• Applicable OSHA, ITSDF, ANSI & ASME standards
• Load charts & calculating equipment capacities (where applicable)
• Also included are topics specific to individual programs & equipment.
See p. 5-15 for details.
• Hands-On Training in our mobile crane & rigging programs

YOU WILL RECEIVE
All Programs Receive:
• CIA student workbook
• Pre-operational inspection forms for
applicable equipment
• Safety decals
• Two safety posters
9-DAY CLASS $2,295
• Discounts on books/materials
TRAIN-THE-TRAINER, MOBILE CRANES Mobile Crane and Boom Truck
Orlando, FL Feb. 2-12 Orlando, FL Aug. 10-20 Programs:
Orlando, FL June 8-18 Orlando, FL Nov. 9-19 • Mobile Cranes handbook
• Mobile Crane hand signal card
4-DAY CLASSES $1,395 Overhead Cranes Program:
TRAIN-THE-TRAINER, BOOM TRUCKS • Overhead Crane hand signal card
Orlando, FL Jan. 5-8 Orlando, FL Aug. 3-6 Rigging Program:
Orlando, FL May 25-28 Orlando, FL Oct. 26-29 • Mobile & Overhead Cranes hand
TRAIN-THE-TRAINER, OVERHEAD CRANES signal cards
Orlando, FL Jan. 19-22 Orlando, FL June 29-July 2 Forklifts Program:
Orlando, FL April 20-23 Orlando, FL Oct. 5-8 • Forklifts handbook
• Hoisting Personnel safety reference
TRAIN-THE-TRAINER, RIGGING card
Orlando, FL March 23-26 Orlando, FL Sept. 28-Oct. 1 Aerial Lift Program:
Orlando, FL May 18-21 • Aerial Platform Safety Manual
• Hoisting Personnel safety reference card
TRAIN-THE-TRAINER, AERIAL LIFTS
• Fall Protection field guide
Orlando, FL March 2-5 Orlando, FL Oct. 12-15
Orlando, FL July 20-23
TRAIN-THE-TRAINER, FORKLIFTS
Orlando, FL Feb. 23-26 Orlando, FL July 28-31 Student materials available for purchase at discount prices
Orlando, FL May 4-7 Orlando, FL Oct. 13-16 for those who attend our Train-the-Trainer Programs.


Special Purchase Safety Training Videos
Crane Institute of America offers you Buy 2 or More of the following 7
top-of-the-line DVD’s/VHS’s for all DVD’s/VHS’s and SAVE!
your training programs, safety meet-
ings and refresher programs for mobile Hand Signal Communication
cranes, overhead cranes and rigging. SKU # vid01 dvd01 20 minutes
Since the operator is required to respond to signals given by the signal
person, they must be correct. This video shows how to effectively and
accurately direct the crane using the hand signals required by OSHA and
ASME.

How to Properly Interpret a Load Chart
SKU # vid06 dvd06 25 minutes
Now more than ever, the exact limitations of a crane must be known.
The viewer is guided step by step in how to find gross capacity,
determine capacity deductions, calculate net capacity and determine
parts of a line. Also included is a dramatic accident involving a two-
crane lift.

Overhead Crane Safety
Inspection, operating practices, operator qualification requirements and
when to lock-out and tag-out overhead cranes are thoroughly covered
in this video. It uses a hands-on approach to provide practical safety
instruction for those working with and around overhead cranes.

Pre-Op Inspection for Lattice Boom Cranes
The pre-operational inspection is the cornerstone of all safe crane
operations. Using OSHA and ASME as a guide, this video covers the
$305 For the first DVD inspection of control functions, operational aids, booms and jibs, wire
$255 Each additional DVD rope, and other critical components of lattice boom cranes.

$205 Each for All Seven! Pre-Op Inspection for Telescoping Boom
Deduct $10.00 for VHS’s Cranes
FREE Mobile Cranes Pre-operational inspection is the first job of the day and maybe the most
handbook with the important. Following OSHA and ANSI guidelines, this video covers the
purchase of one or more inspection of control functions and operational aids, booms, jibs, wire
of our crane safety rope, and other critical components of telescoping boom cranes.
DVD’s or VHS’s.
A $29.95 value! Setup for Safety
FREE Rigging handbook with SKU # vid03 dvd03 20 minutes
the purchase of one or more More than fifty percent of all mobile crane accidents are attributed to improper
of our rigging DVD’s setup. This video covers the important areas of crane setup, which include
or VHS’s. site preparation, blocking under outriggers, use of mats for soft surfaces and
A $19.95 value! how to level the crane. A highlight is the animated section illustrating how the
crane and load weight impose force on the ground.

Working Cranes Near Power Lines
Starting with the pre-lift meeting, the viewer is taken through the
procedures necessary to avoid the lethal results that often occur when
Please note our product return policy on p. 31 cranes contact power lines. A personal account of a worker who lost
three limbs when his crane contacted a power line will leave the viewer
emotionally charged to do the things necessary to avoid contact.


Safety Training Videos
The Best Videos on Cranes and Rigging!
Advanced Tips for Rigging & Lifting
SKU # vadrig $195 dvadrig $205 Forklift 2000 Package AVAILABLE IN SPANISH

Filmed under the guidance of professional riggers, these tips are the SKU # vfpack: 3 Videos & CD $395
result of years of experience. After a quick review of the basics, this OR 4 CD’s $500
video offers tips on how to estimate the weight and center of gravity for Package Contents: (can be purchased individually)
large or odd shaped loads. Topics covered: analyzing loads – the big
picture, determining load weight, sling placement, lift points, odd SKU # vfvid - Forklift 2000 Video - 60 min. $245
shaped loads, productivity and safety tips. 26 minutes Engineering principles, auto/forklift differences, load centers, lateral/longitudinal
engineering, turnovers/ tipovers, rules & maintenance.
Backhoe Loader Pre-Start Inspection
SKU # vssm - Site-Specific Modules Video - 60 min. $195
SKU # vbhlpre $195 dvbhlpre $205 dvbhlpreS $205*
Covers: carbon monoxide poisoning, electric pallet jacks, battery charging, propane
Begin at the beginning. A good daily pre-start inspection helps keep safety, pedestrians - forklifts - walkie stackers.
the machine running reliably all day long. And a good inspection
means more than pulling the dipstick and kicking the tires. Many SKU # vteop - Training For Exp. Operators Video - 16 min. $125
operators have never been taught what they really need to look for. Updates new engineering principles, technical information of new OSHA standards.
This video provides an organized way to check out the machine
before putting it to work. 12 minutes *Available in Spanish SKU # cdfwm - CD-ROM Written Materials - $95

Backhoe Loader Safe Operating
Techniques Fire Extinguisher Training
SKU # vbhlop $195 dvbhlop $205 dvbhlopS $205* SKU # vfext $125 dvfext $205 dvfextS $205*
Lots of people can drive a backhoe loader. A few people can This program explains the various classes of fires, different types
operate one. This video provides tips on how to operate smoothly of fire extinguishers, the key word PASS, and other tips for
and safely in a wide variety of work conditions with several emergency use of fire extinguishers. 17 minutes Available in DVD.
different attachments. 16 minutes *Available in Spanish *Available in Spanish

Construction Forklift Safety Forklift Operator Training
SKU # vcfs $195 dvcfs $205 dvcfsS $205*
SKU # vforks $195 dvforks $205 dvforks $205*
This program is designed to meet mandatory training requirements
Designed for employees responsible for operating forklift
for anyone operating forklifts on the job site. Program details
equipment in a foundry or other industrial settings. Explains forklift
forklift engineering principles, safe operating rules and operator
engineering principles, safe operating rules, forklift maintenance,
maintenance. Excellent program to improve forklift performance
and more. Available in DVD. 16 minutes *Available in Spanish
and safety. Available in DVD. 15 minutes *Available in Spanish

Crawler Excavator Pre-Start Inspection Handling Structural Steel
SKU # vcepre $195 dvcepre $205 SKU # vid08 $195 dvd08 $205 dvd08S $205*
Whether you call it the dipper or the stick, the tool or the bucket, Beginning at the steel fabricator's shop, this video explains OSHA's
the lower or the undercarriage, you need to know what you are new standard "Steel Erection". Also featured are correct techniques
really looking for when you do a pre-start inspection. Operators will for maximizing load stability during transport and rigging
learn to look for things they never thought could give them trouble. techniques for sorting, shaking out and Christmas treeing, with
10 minutes emphasis on how to rig specific type loads. Additionally, the
dangers of improperly chained loads, incorrect load binder use and
Crawler Excavator Safe Operating how to safely release binders are graphically shown when a load
Techniques spills. 28 minutes *Available in Spanish

SKU # vceop $195 dvceop $205
Hand Signals for Construction
There are safe operating techniques to use in sewer work, road
construction, heavy traffic, clinging to a mountainside, taking down
Equipment
a bridge at night or working in a scrap operation. A dynamic video SKU # vgu $195 dvgu $205 dvguS $205*
produced and narrated by real operators, specifically for other This video shows the SAE hand signals in use with various types
operators. 23 minutes of construction equipment in a clear concise manner. Visual use
of the hand signals published as SAE J1307, Verbal explanation of
Fall Protection the correct use of established hand signals, How the machine
SKU # vefpro $195 dvcfpro $205 dvcfproS $205* operator responds to clear signals, The effect of hand signals on
safety, Situations where hand signals may be the best form of
Even a short fall can cause serious ingury or even death. This communication. 11 minutes *Available in Spanish
great training tool covers body harnesses, shock absorbing
lanyards, swing effect, rope grabs, retractable lanyards, and more.
21 minutes *Available in Spanish Please note our product return policy on p. 31


Safety Training Videos
Large Capacity Forklift Operation – Transporting Construction Equipment
Indoor SKU # vtrailer $295 dvtrailer $305 dvtrailerS $305*
SKU # vlcfo $195 dvlcfo $205 New federal regulations in the summer of 2006 affect everyone
transporting construction equipment - whether it’s cross country or
Filmed indoors and outside at a wood processing plant, this video
cross town. Numerous visual examples and easily understood
promotes safe operating techniques. Even seasoned operators will
graphics enhance understanding of complicated regulations.
be reminded of the dangers associated with this equipment. Trailer /
Aggregate Working Load LImit is explained using easy-to-understand
box car loading, Tail swing / overhead clearances, 8 tips for safe,
graphics and real-world examples. 34 minutes.
productive operation, Pick up / transport / delivery of large loads.
*Available in Spanish
19 minutes

Large Capacity Forklift Operation – Trenching And Shoring Operations
Lumber Yard SKU # vtsop $195 dvtsop $205 dvtsopS $205*
SKU # vflumbe $195 dvdflumbe $205 Meets training requirements for those persons assigned the job of
trenching and shoring. Explains the safety rules, requirements, procedures
This video combines the tips and experiences of real lumber yard
and emergency procedures. Available in DVD. 12 minutes
operators with practical safety advice. Real accidents highlighted, *Available in Spanish
Pedestrian and equipment traffic, Design and operating capabilities,
Center of Gravity & safe load transport Night operations & working
on slopes. 23 minutes

Rigging & Lifting with Mobile Wheel Loader Operating Techniques
Construction Equipment SKU # vwlop $195 dvwlop $205 dvwlopS $205*
Recovering from a slide on a side hill, how to avoid slipping into an open
SKU # vrig $195 dvrig $205 dvrigS $205*
excavation, safe road travel, trailer transport techniques, undercutting a
Hydraulic excavators, wheel loaders and rubber-tired backhoes bank, truck loading from stockpiles, loading hoppers, operating near high
were not originally designed to sling load materials. However, they speed traffic or pedestrians, night operations, buried utilities and dozens
frequently are used to lift and handle loads. This video provides other operating situations are covered in this fast-paced video.
easy-to-follow information on the correct rigging and handling 21 minutes *Available in Spanish
when excavation and earthmoving equipment are used to sling and
move loads. 29 minutes *Available in Spanish

Rigging & Lifting with Small Hydraulic Wheel Loader Walk-Around and
Cranes Introduction
SKU # vcrnrig $195 dvcrnrig $205 dvcrnrigS $205* SKU # vwalk $195 dvwalk $205
This is a very important video for anyone who is involved in rigging This walk-around video shows operators how to look for more than
loads to be lifted. Through the use of simple graphics and on-the- fluid levels and leaks, tells them why and what can go wrong if they
job demonstrations, the three basic types of hitches and several miss something. Knowing when, how and why to drain the moisture
variations are clearly shown. The effects of sling angles, rigging out of an air tank can help avoid an accident. This is a video full of
hardware, balance points, sling materials and a dozen other solid advice that even the experienced professionals need to see.
elements affecting safe rigging are graphically addressed and easily 15 minutes
understood. 26 minutes *Available in Spanish

Scaffold Safety Other Titles SKU # Min. Price
SKU # vscaf $99 dvscaf $139 dvscafS $139* Large Capacity Forklift Inspection & Maintenance vlcfim 9:00 $195
Training program for anyone working on or near scaffolding. Basic
Backhoe Loader Maintenance & Transport vbhlmain 11:00 $195
safety rules, operating procedures and how to use scaffolds safely
without injury. Meets training requirements for scaffold safety. Crawler Excavator Maintenance & Transport vcemain 15:00 $195
8 minutes *Available in Spanish Road Crew Safety vcrew 26:00 $195
It Always Happens to the Other Guy vguy 26:00 $195
Seeing Is Believing – Exposing Buried Utilities vsibebu 23:00 $195
Sliding Boom (Telescoping) Forklift
Lifting the Big Ones (Big Cranes, Big Lifts) vidk01 60:00 $145
Operating Techniques
Fire Extinguisher Safety* vfexs 5:00 $69
SKU # vtfot $195 dvdtfot $205
Operators of this equipment are subject to some difficult conditions. *Available in Spanish. All titles available in DVD.
From rough terrain and people on the job site to proper hand signals and
avoiding power lines, this video is a great summary of ten rules to live
by. Importance of Load Charts, Center of Gravity-avoiding tip overs,
Roading the forklift and hills, Steering options and leveling the load. Please note our product return policy on p. 31


Field Guides & Handbooks
Sensible format, straightforward language and superb
graphics make Crane Institute safety handbooks and
field guides easy to consult, understand and apply!

FREE Crane Safety or Rigging Safety Reference
Card with the purchase of one or more Mobile
Cranes or Rigging handbooks!
Basic Operating Practices
SKU # bkt11 $6.95
This guide provides a thorough introduction to many of the essential
practices and procedures employees need to be familiar with before
beginning work around lifting equipment. Mobile Cranes (Seventh Edition)
SKU # mnl11 $29.95
Conditions That Reduce Capacity This crane safety handbook is the most up-to-date publication
SKU # bkt12 $6.95 available on mobile cranes. Topics include: conditions that reduce
Avoiding conditions that cause a crane's capacity to be lowered or lifting capacities, understanding load charts, pre-op inspection,
compromised is the major focus of this field guide. Some of the factors crane setup, working around power lines, operating procedures,
discussed are crane condition, being out of level, operating in high winds, hoisting personnel, and more. A training program in itself. Excellent
dynamic loading, and duty cycle operations. preparation for operators taking licensing and certification exams.
Quantity Discounts:
Fall Protection 2-10 Books $26.95 11-49 Books $23.95
SKU # bkt15 $14.95 50-99 Books $20.95 100+ Books $17.95
Following OSHA guidelines, this field guide discusses types, requirements
and applications of standard fall protection systems. This field guide is an
excellent model for training personnel in the reduction of fall-related Rigging (Ninth Edition)
accidents. Sure to catch the reader's attention are the sections on dynamics SKU # mnl12 $19.95
of a fall, and fatality statistics.
Words that describe this pocket-size handbook: practical, organized and
How to Use Load Charts great illustrations. Contains the latest information on wire rope, rigging
hardware, and slings, including capacity tables and charts. Also covers
SKU # bkt14 $9.95 load weight estimation, sling loading calculations, and proper handling of
Using load charts correctly is considered the single most important aspect loads. This is a must-have handbook for anyone who works with cranes
of safe crane operation. Step by step, this guide explains how to determine and rigging. Also an excellent text for training.
the lifting capacity of a crane. Areas of operation, load radius, gross and net Quantity Discounts:
capacity, parts of the line and other common technical terms are also 2-10 Books $17.95 11-49 Books $14.95
defined and illustrated. 50-99 Books $11.95 100 + Books $9.95
Hoisting Personnel
SKU # bkt10 $6.95 Forklifts (Second Edition)
Using OSHA as a guide, this is a thorough overview of a vitally important yet SKU # mnl21 $17.95
often misunderstood aspect of crane operations. Topics include platform Absolutely the best handbook published on the safe use of forklifts.
specification, trial and test lifts, pre-lift inspections and the procedures This pocket-size handbook provides operators, managers and safety
required to safely lift personnel. professionals with the tools to identify and control lift truck hazards.
Details training requirements, physical principles, lifting, moving, and
Working Cranes Near Power Lines placing loads in various operating environments. In addition, this
SKU # bkt09 $6.95 handbook provides sample safety checklists for pre-operational
inspection and lift planning. A must for operator training!
Power line contacts account for the majority of crane-related fatalities. To
avoid this highly lethal type of accident, certain procedures must be Quantity Discounts:
followed. This field guide takes you step by step through the pre-lift meeting, 2-10 Books $14.95 11-49 Books $12.95
maintaining the required clearances, utilizing a signal person, driving under 50 + Books $9.95
power lines, and what an operator should do in the event of contact.

Pre-Operational Inspection Scaffolding Safety (Second Edition)
SKU # bkt13 $6.95 SKU # bkt16 $15.95
Guides the person charged with this task through the key phases of the This handbook presents OSHA's scaffolding regulations in a clear,
inspection, from the physical inspection to the final pre-operational test of all understandable format. Illustrations provide the competent person and
functions. Emphasis is placed on the inspection of wire rope and when it others the knowledge to erect frame scaffolding in compliance with
should be replaced. Ideal for both lattice and telescoping boom cranes. federal regulations. Describes major types of metal frame scaffolding
and their use; details potential hazards associated with scaffolding
Crane Setup erection and provides remedies. Safety checklists and scaffolding
exercises are also included. Great text for training!
SKU # bkt08 $6.95
Quantity Discounts:
Statistics reveal that proper crane setup reduces accidents by 50%. This
field guide helps you do just that by illustrating and discussing all the 2-10 Books $14.95 11-49 Books $13.95
important aspects, such as site preparation, setup on soft surfaces, how to 50 + Books $12.95
level the crane, and more.


Books & Manuals
Cranes and Derricks (Third Edition) Rigging Manual
SKU # mnl22 $99.95 SKU # mnl02 $48.95
Cranes and Derricks explains the selection, installation and safe This true benchmark in the rigging industry contains over 600
use of cranes and derricks on construction sites. Also addressed photos/illustrations and 70+ data tables. Topics include: wire &
are new technologies, operational planning, load handling, and fiber rope, chain, rigging hardware, rigging procedures and
updates in safety and accident avoidance guidelines. Over precautions. 188 pages.
600 pages.

Wire Rope Users Manual
Crane Stability on Site (Fourth Edition)
SKU # mnl09 $69.95
SKU # mnl06 $29.95
This book aims to reduce incidents of crane instability by giving
Written and published by the Wire Rope Technical Board, this
information on the various factors which have to be considered
manual is the most comprehensive and in-depth discussion on
when planning the use on site of mobile and tower cranes. The
wire rope published. Topics include: basic components,
factors discussed include type and choice of crane, loading
handling and installation, operation, inspection and
cases, ground conditions and foundation details.
maintenance of wire rope. In addition, capacity charts for all
commonly used types of wire rope are included.

Handbook of Rigging (Fifth Edition)
SKU # mnl20 $95.95 Wire Rope Sling Users Manual
Updated and expanded to incorporate new advances and (Third Edition)
technologies, this book is a comprehensive source of information
and guidelines on rigging. Also contains data tables, formulas and SKU # mnl05 $29.95
a wide range of techniques. Also written and published by the Wire Rope Technical Board,
this companion volume provides a thorough treatment of the
following areas: glossary of wire rope sling terms, useful
Operating Techniques for the guidelines for riggers, turning loads with slings, capacity charts
for all types of wire rope slings, rigger's checklist, crane hand
Tractor-Loader-Backhoe signals, and how to care for wire rope slings. Both books are a
SKU # mnl08 $39.95 must for anyone whose job involves the use of wire rope and
wire rope slings.
Since 1983 this book has been the standard training source for
schools, utilities, and public works. Operating Techniques for the Mobile Crane Manual
Tractor-Loader-Backhoe explains how to get maximum
productivity from this versatile machine. In 1996 it was adopted SKU # mnl03 $72.95
for training by the International Union of Operating Engineers. With 560 illustrations and 156 load chart problems, this is an
excellent presentation of components, terminology, quadrants
of operation, pre-lift considerations, setup and operating
Construction Foreman’s Safety procedures. 424 pages
Handbook
SKU # mnl07 $42.95 Hoisting & Rigging Safety Manual
Written to help managers, supervisors and foremen understand (2009 Edition)
the basic components of a safety program, this book discusses
what they can do to prepare for a very important part of their SKU # mnl13 $34.95
job — accident prevention. This manual identifies the basic hazards in rigging and hoisting,
explains the safeguards necessary to control or eliminate these
hazards, and spells out other safety requirements.
Construction Math Made Easy
SKU # mnl38 $29.95 Other Titles SKU # Price
The contents of this book have been proof read by a graduate The Top 10 Construction Achievements of the 20th Century mnl28 $79.95
engineer with multiple degrees who was totally amazed at its
simplicity and accuracy. The book allows a person with limited or The History of Road Building Equipment mnl27 $79.95
no training to perform advanced math problems with ease.
Elevated Work Platforms & Scaffolding mnl01 $89.95
Aerial Platform Safety Manual mnl29 $7.95
Construction Health & Safety Manual Digger Derrick Safety Manual mnl04 $7.95
SKU # mnl31 $24.95 Backhoe/Loader Safety Manual mnl24 $7.95
This is the book to read for protection against construction health Hydraulic Excavator Safety Manual mnl30 $7.95
and safety hazards. Topics include personal protective equipment,
scaffolds, hazardous substances, swing stages, scissor and Wheel Loader/Tractor Safety Manual mnl34 $7.95
boom lifts, trenching, and much more.
Skid Steer Safety Manual mnl35 $7.95
Crawler Tractor/Loader Safety Manual mnl36 $7.95
Please note our product return policy on p. 31 Compact Excavator Safety Manual mnl37 $7.95


Standards & Checklists
ASME Standards for Cranes & Lifting Devices
NEW B30.1 Jacks (2009) $63.00
B30.2 Overhead Cranes (Single or Multiple Girder) $72.00
NEW B30.3 Construction Tower Cranes (2009) $63.00
B30.4 Portal, Tower, Pedestal Cranes $69.00
B30.5 Mobile & Locomotive Cranes (2007) $97.00
B30.6 Derricks $57.00
B30.7 Base Mounted Drum Hoists $62.00
B30.8 Floating Cranes/Floating Derricks $72.00
B30.9 Slings $79.00
B30.10 Hooks $72.00
B30.11 Monorails & Underhung Cranes $79.00
B30.12 Handling Loads Suspended from Rotorcraft $57.00
B30.13 Storage Retrieval(S/R) Machines...Equipment $65.00
B30.14 Side Boom Tractors $57.00
B30.16 Overhead Hoists (Underhung) $69.00
B30.17 Overhead Cranes $69.00
B30.18 Stacker Cranes $57.00
B30.19 Cableway $74.00
B30.20 Below-The-Hook Lifting Devices $79.00
B30.21 Manually Lever-Operated Hoists $74.00
B30.22 Articulating Boom Cranes $77.00
B30.23 Personnel Lifting Systems $65.00
B30.24 Container Cranes (2008) $48.00
B30.25 Scrap and Material Handlers $60.00
B30.26 Rigging Hardware $57.00
NEW B30.27 Material Placement System (2009) $54.00

Checklists for OSHA Required Annual Inspections
(12 individual checklists in packet)
Ensure complete OSHA & ANSI/ASME compliance by using these unique annual, periodic and
monthly crane inspection checklists. Our multi-page inspection checklists are made of heavy
card stock and provide an OSHA & ANSI/ASME reference for each item inspected. Also
included are areas for documenting wire rope inspection and load testing (where applicable).
Checklists for OSHA
Mobile Cranes (Telescoping Boom) SKU #acl17 $34.95
Required Pre-Operational Inspections Mobile Cranes (Lattice Boom) SKU #acl18 $34.95
(Pads of 50) $17.95
Boom Trucks SKU #acl19 $34.95
Mobile Cranes (Lattice Boom) SKU #poc18
Tower Cranes SKU #acl20 $34.95
Mobile Cranes (Telescoping Boom) SKU #poc19
Overhead Bridge & Gantry Cranes SKU #acl21 $34.95
Overhead Bridge Crane SKU #poc20
Monorail Systems SKU #acl22 $34.95
Industrial Lift Trucks SKU #poc21
Jib Cranes & Hoists SKU #acl23 $34.95
Aerial Lifts SKU #poc22
Industrial Lift Trucks SKU #acl24 $34.95
Bridge, Gantry and Monorail Crane SKU #poc23
Scissors Lifts SKU #acl25 $34.95
Jib Crane and Hoist SKU #poc24
Vehicle-Mounted Aerial Lifts SKU #acl26 $34.95
Boom-Supported Aerial Lifts SKU #acl27 $34.95
Personnel Hoisting- Lift Plan Chain Slings SKU #acl28 $34.95
(Pads of 50) SKU # acl32 $19.95
Rough Terrain Lift Trucks SKU #acl29 $34.95
Minimize risk when hoisting personnel with cranes by using this
Suspended Personnel Platform SKU#ac130 $19.95
outstanding form for planning and compliance with OSHA
requirements. Manual Chain Hoists SKU #acl33 $34.95
Lever-Operated Hoists SKU #acl34 $34.95
Critical Lift Plan
(Pads of 50) SKU # acl31 $19.95 Checklist for Critical Lifts
Exceptional for the documentation of crane configuration, net and 15 pages SKU #rcc17 $6.95
gross load weight and rigging, all of which are necessary to This pocket size checklist is a quick reference guide to the important
ensure that proper calculations are made before performing a safety measures to consider before beginning a critical lift. It focuses
critical lift. on rigging, equipment, plan, and multiple crane lifts.


Technical Handbooks & Manuals
IPT Cranes and Rigging NEW!
Handbook
SKU # mnl43 $22.95
Bigger and better! All of the existing sections have been
reorganized, updated and expanded. Five new sections, and
over 100 new pages were added. The IPT’s Crane and
Rigging Handbook is used for reference and/or training in
every type of industry and all methods of classroom training
in North America.
Mike’s Rigging Mysteries
SKU # mnl55 $49.95
IPT Cranes and Rigging Training 11 booklets, 24 pages per book, 4.25” x 5.5”, softbound. This series of books
Manual contains over 100 informative and educational rigging workshops. These
SKU # mnl52 $38.00 booklets will entertain non-riggers and riggers alike with hours of fun problem-
Bigger and better! All of the existing sections have been solving activities. Included with this series of books are three field reference
reorganized, updated and expanded. Five new sections, and cards that contain charts, tables, formulas and rigging illustrations for solving
over 100 new pages were added. The IPT’s Crane and the workshops.
Rigging Handbook is used for reference and/or training in
Mike’s Safety Tips
every type of industry and all methods of classroom training
in North America.
NEW! SKU # mnl56 $6.99
3 booklets, 26 pages, 2.75” x 4:75”. These
easy to read “tips” booklets work great as a set
IPT Electrical Handbook or as individuals. Each booklet contains over 25
SKU # mnl49 $22.95 tips per subject: rigging practices, mobile crane
IPT's ELECTRICAL HANDBOOK serves the double role of operations and overhead crane use. Your
being a classroom or self study text, and is a superb employees will really enjoy the discussion that
reference for electrical fundamentals, trade practices, and is generated around the “tips” subjects during
engineering data. It is designed for immediate practical use monthly safety meetings. These booklets are
in the field, classroom or office. This book refers to both the also excellent for annual employee handouts,
NEC and CEC codes. safety gifts and training supplements.

IPT Rotating Equipment Inspection Guidelines
NEW!
Handbook SKU # rcc18 $3.95
SKU # mnl48 $22.95 12 pages, 8.5” x 11”, softbound Guidelines for
IPT's ROTATING EQUIPMENT HANDBOOK emphasizes the inspecting a wire rope system or installation are
use of proven diagnostic, and corrective methods and now available in a new 12-page brochure from
procedures for determining machinery condition and the Wire Rope Technical board. The publication
predicting mechanical problems for Millwrights, Industrial provides a clear and concise approach to
Mechanics, Heavy Duty Mechanics, Machinists, and assisting wire rope users’ needs to comply with
Rotating Equipment Technicians. industry and governmental regulations that
require inspection of individual ropes, fittings
and attachments, as well as entire operating
IPT Metal Trades & Welding systems at regularly scheduled intervals.
Handbook
SKU # mnl44 $22.95
IPT's METAL TRADES & WELDING HANDBOOK has become LiftCalc 3 “Rigging
one of the most widely accepted industrial books across Calculator” Software
North America. It is used by journeymen and apprentices in
SKU # dvlc3 $95.00
all types industrial and resource based industries, including
fabrication, construction, and in-plant maintenance. Created for Microsoft®Excel® this application
is designed to assist users with simple and
Other Titles SKU # Price complex rigging problems. This "not so
IPT Industrial Fasteners Handbook mnl46 $22.95 ordinary" spreadsheet application is well
organized, and highly illustrated. It has so many
IPT Industrial Hydraulics Handbook mnl47 $22.95
user friendly features that it almost looks like a
IPT Industrial Trades Handbook mnl51 $22.95 stand alone program instead of an Excel
IPT Guide to Blueprint Interpretation mnl50 $37.95 Workbook. Includes: Tensions and Angles,
IPT Safety First Handbook mnl45 $22.95 Rigging Equipment, Weight Calculations.


Crane & Lift Equipment Models
Beautifully crafted b. c.
models, certain to a.
please any collector!

d.

Our Grove GMK 7550
has a length of 59”
and height of 84”! e. f. g.

Only
$400.00

h. i.

Large Scale Models!
This Page Page 25
a. GROVE GMK 7550 j. POTAIN IGO21 TOWER CRANE
SKU # crm13 Length: 59” Height: 84” $400.00 SKU # crm21* Length: 12” Jib Height: 41” $150.00
b. GROVE YARDBOSS 5515 k. POTAIN MDT-178 TOWER CRANE
SKU # crm03 Length: 4” Jib Height: 19” $80.00 SKU # crm02* Length: 53” Jib Height: 43” $450.00
c. GROVE TM 9120 *cm02Red or cm02Yellow
SKU # crm05 Length: 11” Boom H: 10” $160.00 l. TEREX DEMAG AC 200
d. TEREX DEMAG AC 35 MAMMOET* SKU # crm14 Length: 12” Boom H: 65” $165.00
SKU # crm10 Length: 7” Boom H: 32” $85.00 m.GROVE RT 700 E SUNSHINE
*Note: this model is only available in Red. See our website, SKU # crm11S Length: 6.5” Boom H: 26” $55.95
www.craneinstitute.com for updated photograph. n. WESERHUTTE W180 DRAG LINE
e. NATIONAL 1400 SKU # crm24 Length: 8” $295.00
SKU # crm19 Length: 9.5” Boom H: 33” $150.00 o. MANITOWOC 16000
f. SHUTTLELIFT CARRY DECK 5540F SKU # crm08 Length: 7” Boom Height: 71” $550.00
SKU # crm09 Length: 4” Height: 19” $80.00 p. GROVE GMK 5135/5110-1
g. GROVE GMK 3055/3050 SKU # crm30 Length: 10.625” Width: 2.625”
SKU # crm04 Length: 9” Jib Height: 41” $150.00 Boom Height: 3’ $299.95
h. MANLIFT r. MANITOWOC 555
SKU # crm25 Length: 7” Height: 10” $90.00 SKU # crm17 Length: 8” Height: 24” $350.00
i. SCISSOR LIFT s. GROVE RT540E
SKU # crm26 Length: 3” Height: 8” $90.00 SKU # crm32 Length: 9.4” Width: 2”
Boom Height: 2.8” $189.95


Crane & Lift Equipment Models

l. m.
j.

k.

n. o. p.

q. r. s. t.

Amazing Detail! Expert Crafting!
t. NATIONAL 1300H
u. v. SKU # crm18 Length: 11” Max Boom: 25” $150.00
u. MANITOWOC 18000
SKU # crm22 Length: 7” Boom Height: 6’ $695.00
v. MANITOWOC 4100W
SKU # crm28 Boom Height: 5’ $295.00
Also available:
• Manitowoc 4100W in 1:50 scale
• Ringer model
• Tower Extension Kit
• Boom Extension Kit

See photographs of the following NEW models on our website,
www.craneinstitute.com.

TEREX BENDINI RC45 CRANE
SKU # crm33 1:50 Scale $145.95
TEREX PM AC40/2L MICHIELSENS
SKU # crm34 $163.95
JOEL NISSAN FORKLIFT
SKU # crm35 1:25 Scale $36.95
Visit our website www.craneinstitute.com SHINSEI KOBELCO PANTHER X250 CRANE
to view our complete line of models. SKU # crm36 $89.95
BUCYRUS ERIE 22-B CABLE SHOVEL
SKU # crm37 $179.95
GROVE TM 1500
Please note our product return policy on page 31 SKU # crm07w Length: 11” Jib Height: 45” $95.00


Safety Cards & More

Rigging Capacity Wall Chart
SKU # pst19 $14.95 Handyman In-
Pocket Ref
Full color graphic SKU # mnl25 $ 12.95 Your-Pocket
design; 22" x SKU # mnl26 $12.95
28"; Displays The Pocket Reference
capacity tables covers air and gases, The Handyman is loaded
for shackles, automotive, carpentry, with graphics, data, and
eye bolts, wire chemistry, computers, tables on anchors, belts,
rope, chain and constants, electrical, first aid, general bolts, glues, paints, solvent, nails,
synthetic web science, geology, glues, solvents, spikes, staples, pipes, pumps, rope,
slings. paints, hardware, math, mine, money, screws, sheet metal, water and air,
plumbing, rope, cable, steel, survey- welding and conversion tables. Also
ing, tools, water, weather safety, and included is general science, carpentry,
conversion tables. The ultimate prob- and math information.
lem solving resource.

In a Flash - Rigging Inspection
Training Field Reference Guide
SKU # mnl57 $19.95
224 pages, 3” x 5”, softbound

Rigger's Capacity Card An amazing collection of 110 color photos that depict the most
common types of damage as outlined by OSHA, ANSI, &
SKU # rcc13 $2.95 • ASME regulations which require the rigging gear’s removal
3.5" x 6.25" 6 panels from service. Also included are 110 corresponding back &
white photos outlining the reason for removal.
This wallet size fold-up card contains
capacities for eye bolts, shackles and
wire rope, chain and synthetic web slings. Crane Safety Reference Card
Included are weights of common SKU # rcc14 $6.95 each
materials used on job sites and a step-by- 25-199 $5.21 each
step example of how to calculate sling 200 or more $3.48 each
loading. (min. order 10, laminated &
7" x 6.25" four panels
weatherproof, fold up)
This pocket size-fold up card is a valuable reference
guide for all operators and other personnel working
with mobile cranes. Key areas covered are crane
setup, pre-operational inspection, working near
power lines and how to interpret load charts.
Rigging Safety Reference Card Laminated, weatherproof, folds in half.
SKU # rcc16 $6.95
25-199 $5.21 each
200 or more $3.48 each
7" x 6.25" four panels Hoisting Personnel Safety
This pocket size fold-up card is a Reference Card
quick reference card to the SKU # rcc15 $4.95
important aspects of rigging. The 25-199 $3.71 each
key areas covered are wire rope, 200 or more $2.48 each
slings, hardware and rigging 3.5" x 6.25" two panels
practices. Laminated, weatherproof
folds in half. This pocket size reference card is ideal for pre-lift
meetings, training, and to help improve safety when
cranes are used to lift personnel. Covers platform
requirements, selection of rigging, trial and test lifts
and pre-lift inspection. Laminated and weatherproof.


Safety Cards & More

Crane Institute Safety Posters - Hand Signal Charts Now
Set of Two Available in Spanish!
SKU # pst16 $18.95
Full color graphic design.
18" x 24" Mobile Crane Hand Signal
Wall Chart
SKU # pst17 $14.95 SKU # pst17S $14.95*
18" x 24" *Available in Spanish

Overhead Crane Hand Signal Wall
Chart
SKU # pst18 $14.95 SKU # pst18S $14.95*
18" x 24" *Available in Spanish

Please note our product return policy on p. 31


Safety Cards & More

Mobile Crane Hand Signal Charts
Hand Signal OSHA required, for posting on
outside of crane or in the work
Card area, self-adhesive, weatherproof.
SKU # hsc14 $1.95
SKU # hsc14S $1.95*
Mobile Cranes
Wallet size to illustrate the SKU # hsc22 $14.95
correct hand signals SKU # hsc22S $14.95*
required by OSHA and
8.5" x 11"
ANSI/ASME when
*Now available in Spanish!
directing operators of
mobile cranes (min. order Overhead Cranes
10, laminated & SKU # hsc21 $9.95
weatherproof, folds in 5.5" x 8.5"
half)

*Now available in Spanish!

Overhead
Crane Crane & Equipment
Hand Signal Inspection Certificate
Card Decal
SKU # dcl16 $2.95 (qty. discounts available)
SKU # hsc15 $1.50
These long-lasting full color foil decals guard
Wallet size to illustrate the
against fading and peeling. They provide clear
correct signals required
and concise documentation of OSHA and ASME
by OSHA and ANSI/ASME
crane or equipment inspections, such as forklifts
when directing the
and rigging.
operation of overhead
cranes.(min. order 10,
laminated & weatherproof)

Calipers
SKU # svg24 $16.95
Tower Crane Made of sturdy stainless steel, measures the inside
Hand Signal and outside diameter of wire rope and other
inspection items.
Card
SKU # hsc16 $1.50

Wallet size to illustrate the
correct signals required by
OSHA and ANSI/ASME when
directing the operation of Sheave Gauges
tower cranes.(min. order 10,
laminated & weatherproof) Heavy Duty Poly SKU # svg23 $7.95

A necessary tool when inspecting cranes, load
blocks and other hoisting equipment which utilize
sheaves.


Safety Cards & More

Crane Institute of America Handheld
Embroidered Golf Shirt Anemometer
Comfortable polyester/cotton blend, short sleeve, available in eight colors
and sizes Medium, Large, X-Large, and XX-Large. SKU # svg-25 $39.95
SKU # golfbark* $19.95 SKU # golfhunter $19.95
SKU # golfnavy $19.95 SKU # golfstone $19.95
Features:
SKU # golfgray $19.95 SKU # golfsage $19.95
SKU # golfburgundy $19.95 SKU # golfslate $19.95 Wind Speed (mph, km/h, m/s,
*Limited sizes available Knos)

Displays MAX & Average Wind
Speed Since Power On

Beaufort Scale Bar Graph (0-2)

Wind Chill (oF or oC)

Temperature (oF or oC)

Backlight with Auto Off

Battery Saving Auto Off

Neck Band Included for Easy Carrying

Specifications:
Crane Institute of America T-Shirt Maximum Measured Speed : 67 mph
Pre-shrunk, 100% cotton. White only. Available in sizes: Small, Medium,
Large, X-Large, and XX-Large. Minimum Measured Speed : 0.44 mph

SKU # TShirtS $ 9.95 SKU # TShirtXL $ 9.95 Resolution-Wind Speed: 0.1 for All Units
SKU # TShirtM $ 9.95 SKU # TShirtXXL $12.95
Temperature Measuring Range: -21.8 to 138.2 oF/ -29.9 to
SKU # TShirtL $ 9.95 59 oC

Resolution-Temperature : 0.2oF/0.1oC

Power Requirements:
Power Requirements : 1 CR2032 Button Cell (Not Included)

They provide clear and concise documentation of OSHA
and ANSI/ASME

Crane Institute of America 2-Tone Cap Receiver:
Brushed cotton constructed cap with embroidery on front center. 6 panel cap 1.63” L x .7” W x 4” H
has a self-fabric adjustable closure with brass buckle and grommet. Available
in Kakhi and Navy.
SKU # Hat $14.95 Package:
2.5” L x 1.25” W x 5.5” H



Registration & Product Order Form

Sign up 2 for an Inspector class, get the 3rd tuition free!*
*Students must to Mobilethe same company, in the same inspector training program.
Only applies
be from
Crane Inspector and Overhead Crane Inspector classes.

Registration Free Follow-up Services PROGRAM CODES FOR ALL TRAINING PROGRAMS
Call, fax, mail or e-mail the Training program participants are Code Program Length Fee $
registration with payment to Crane automatically enrolled in our Crane ALSI Aerial Lift Safety & Inspector 3 days $795
Institute of America, Inc. Attendance Safety Hotline service for post-
at these training programs is training support and consultation. BTO Boom Truck Operator, “Hands-On” 5 days $1295
carefully limited. To guarantee your E-mail your technical questions to MMCS Managing (Mobile) Crane Safety 2 days $595
place, register now. Confirmation and instructors@craneinstitute.com
hotel information will follow. Visa, FLSI Forklift Safety & Inspector 3 days $795
Mastercard and American Express Cancellation Policy MCO(3) Mobile Crane Operator 3 days $895
accepted.
We appreciate at least 7 days MCO(4) Mobile Crane Operator, “Hands-On” 4 days $995
advance notice for cancellations. MCI * Mobile Crane Inspector 4 days $995
Accommodations
There will be a processing fee of $50
We have arranged for training for "no-shows". OCSI * Overhead Crane Safety & Inspector 4 days $995
program participants to receive R/SP Rigger/Signalperson 2 days $595
discounted room rates. When making Taxes RSI Rigging Equipment Inspector 3 days $795
room reservations, please identify
yourself as a Crane Institute of All classes held in states where state TCSI Tower Crane Operator & Inspector 4 days $995
America seminar attendee. tax is applicable are subject to state
TTAL Train-The-Trainer, Aerial Lifts 4 days $1395
tax in addition to the course fee.
TTBT Train-The-Trainer, Boom Trucks 4 days $1395
Training Program Schedule
Note: TTF Train-The-Trainer, Forklifts 4 days $1195
All training programs will begin at All hands-on programs require work TTMC Train-The-Trainer, Mobile Cranes 9 days $2295
8:00 AM and conclude at 4:00 PM. boots/shoes. Be sure to bring a
TTOC Train-The-Trainer, Overhead Cranes 4 days $1395
calculator when attending training
Certificates of Training programs. Audio and/or video TTR Train-The-Trainer, Rigging 4 days $1395
recording of programs is strictly OEX Certification for all Operator courses $95
Certificates suitable for framing are
prohibited.
awarded to all attendees who IEX Certification for all Inspector courses $295
complete the training program(s).
TEX Certification for all Trainer courses (classroom only) $345
*Sign up 2 for MCI or OCSI class and get the 3rd tuition free.


Registration & Product Order Form
Complete this section for product order & registration! PRODUCT ORDER
Billing Information SKU# Item Description Quantity Unit Price Price

Contact:

Company:

Billing Address:

City, State, Zip Code:

Phone Number:

Fax Number:

E-mail Address:

• Florida residents add 7% sales tax. • Please allow 12 - 15 business days for
Product Shipping Information (if different from Billing Information)
• Alaska, Hawaii and U.S. territories add delivery.
$15.00. • Standard shipping and handling prices are
Contact: • Rush orders: subject to change without notice. Subtotal
Add $15 for 2-day shipping • Mastercard, Visa and American Express
Add $20 for overnight shipping are accepted. 7% Sales Tax
Company: • Foreign Countries - Call us directly for total • If 20 or more of any MNL item is ordered, FL Residents Only
shipping amount. Your choice of UPS or S&H is 5% of the order (or actual shipping
USPS. Please specify your delivery cost). Shipping** *
Shipping Address:
method. Your account will be charged
actual postage plus a handling fee. Grand Total
City, State, Zip Code:
Product Return Policy: Please note that we can **For Totals Add...
Phone Number: only offer refunds on merchandise that is returned ...Up to $50 $7.95
$50.01 to $100 $13.95
unopened, in its original packaging. A restocking
Fax Number: $100.01 to $300 $17.95
fee of 15% will be deducted from your refund. $300.01 to $500 $19.95
500.01 to $800 $22.95
E-mail Address:
You may also purchase products or register at $800.01 to $1,000 $27.95
Over $1,000 $29.95
Complete this section for payment! www.craneinstitute.com
Call: 800-832-2726 • 407-322-6800 • Fax: 407-330-0660

REGISTRATION
PAYMENT:(Circle One) VISA MC AMEX CHECK PO** Security Code# __-__-__-__
American Express has a 4-digit security code on front/MC Visa has 3-digit code within signature strip

Credit Card Account Number: Exp. Date: Sign up 2 for Inspector Program, get 3rd tuition free!
(Mobile Crane & Overhead Crane)
Name on Card:
PLEASE PRINT OR TYPE
Signature:
Student Name Job Title Program Code* City/Dates
Check enclosed for $ made payable to Crane Institute of America, Inc
Purchase Orders accepted for training programs & product orders of $100
or more. Please fax to 407 330-0660

Purchase order enclosed #

Military - Form DD-1556

Company:
Mailing Address:
Crane Institute of America, Inc. Address:
3880 St. Johns Parkway
Sanford, FL, 32771 City: State: Zip:

Phone: Fax: E-mail Address:

Authorized by:
CRANE INSTITUTE PROMISE
*See Program Codes on Page 30
SATISFACTION GUARANTEED!
Please note: Registration/Exam fees are due prior to program start date.


The Standard in Crane Training

3880 St. Johns Parkway
Sanford, Florida 32771

Attention Mailroom: If undeliverable to addressee, please
reroute this brochure to the Maintenance Manager.

Nationally Accredited CIC Certifications and
Authorized Practical Examiner Training . . . . . .2-3

Training Programs:
Mobile Crane . . . . . . . . . . . . . . . . . . . . . .5-7, 9
Boom Truck . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Tower Crane . . . . . . . . . . . . . . . . . . . . . . . . .10
Overhead Crane . . . . . . . . . . . . . . . . . . . . . . .11
Rigger/Signalperson . . . . . . . . . . . . . . . . .12-13
Aerial Lift . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Forklift . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Train-The-Trainer . . . . . . . . . . . . . . . . . . . . . .16

Products:
Safety Training Videos . . . . . . . . . . . . . . .17-19
Field Guides/Handbooks/Manuals . . . .20-21, 23
Standards & Checklists . . . . . . . . . . . . . . . . .22
Crane & Lift Equipment Models . . . . . . . .24-25
Safety Cards & More . . . . . . . . . . . . . . . . .26-29

Registration & Product Order Form . . . . . . .30-31

2010 cia-catalog

More Related Content

Viewers also liked

Similar to 2010 cia-catalog

2010 cia-catalog