This document contains 13 questions related to national security policy and foreign affairs. The questions cover a range of topics, including presidential decision-making processes, the influence of technology on security strategies, and the roles of key agencies in national security issues.
Jobs and Protectionism in the Stimulus Package Preside.docxchristiandean12115
Jobs and Protectionism in the Stimulus
Package
President Obama's spending bill promotes the use of
American goods and labor. Despite foreign and domestic
protests, the language is mainly rhetorical
Members of the Senate and the House hash out differences between the two versions of the
economic stimulus legislation at the U.S. Capitol on Feb. 11 Chip Somodevilla/Getty Images
By Moira Herbst
The $787 billion spending legislation being signed on Feb. 17 by President Barack Obama is
designed to jolt some life into a moribund economy. Already, though, provisions to use the
money to "buy American"—whether that means American iron, steel, or labor—is sparking a
debate about whether such rules in a global economy amount to protectionism.
Organized labor and small U.S. manufacturers won an amendment to the stimulus bill to ensure
that more materials used on construction and infrastructure are made in the U.S. Critics of the H-
1B visa program won tougher rules governing when banks that are bailed out by the Troubled
Assets Relief Program (TARP) can fill jobs with skilled immigrants.
The final language drew criticism from abroad, where editorials and government officials
warned it could run afoul of trade agreements. But both provisions are less stringent than earlier
versions had been, and neither is likely to have a radical effect on how stimulus spending takes
shape.
http://www.businessweek.com/bios/Moira_Herbst.htm
Opposition from Exporters
The clearest attempt to wall off foreign companies from U.S. spending came in a "Buy
American" provision. That rule requires that only U.S. iron, steel, and other manufactured goods
be used for public buildings and public works funded under the bill. However, it comes with
several key caveats. For one, the language states that the Buy American policy must not violate
U.S. obligations under existing international trade agreements. Nor does the rule apply if
American goods aren't available in sufficient quantities or if they'll increase the cost of the
overall project by more than 25%. Federal highway, transit, and airport projects are already
covered by similar Buy American requirements.
The battle over the provision had been contentious. On Feb. 3, 100 business groups and
companies—including the U.S. Chamber of Commerce, General Electric (GE), Caterpillar
(CAT), and other major construction, defense, and high-tech companies—wrote a letter to Senate
leaders warning that a far-reaching Buy American rule "will harm American workers and
companies across the entire U.S. economy, undermine U.S. global engagement, and result in
mirror-image trade restrictions abroad that would put at risk huge amounts of American exports."
But advocates of the provision—including the Alliance for American Manufacturing, a
partnership of manufacturing companies and the United Steelworkers union—said such rules are
needed to stem the tide of layoffs in th.
The document discusses the trade tensions between the US and other countries regarding steel and aluminum tariffs. It provides background on President Trump's views on restarting the US steel industry and his belief that other countries were taking advantage of the US in trade. It also summarizes the reactions of the US, China, EU, and other countries to the tariffs. The EU and others threatened retaliation while China said it did not want a trade war but was not afraid of one. The document also discusses the potential impacts on domestic US industries and jobs as well as other countries' economies and strategies for responding to the trade tensions.
EDITORS PICK2,374 views Mar 30, 2020,0937 am EDTForbesCoro.docxbudabrooks46239
EDITORS' PICK|2,374 views| Mar 30, 2020,09:37 am EDT
Forbes
Coronavirus Highlights U.S. Strategic Vulnerabilities Spawned By Over-Reliance On China
Loren ThompsonSenior Contributor
Aerospace & Defense
I write about national security, especially its business dimensions.
President Trump has been criticized for highlighting the Chinese origins of the current coronavirus crisis. Whether such comments are constructive or not, the crisis has provoked a broader debate about the role that China plays in the American economy.
In the two decades since Beijing was admitted to the World Trade Organization, it has gradually eclipsed America’s preeminence as a manufacturing nation. For instance, the U.S. had two dozen aluminum smelters within its borders when the new century began; by the time President Trump took office, only five remained of which two were functioning at full capacity.
Chinese smelters have no inherent pricing advantage, so critics have correctly concluded that China became the world’s largest producer (and exporter) of aluminum through the use of subsidies and other trade-distorting practices. A similar pattern prevails in steel, which explains why both industries became early targets of Trump tariffs.
More broadly, China has tended to dominate production of every new technology in recent years, from smart phones to wind turbines to solar panels to commercial drones. U.S. officials are unanimous in agreeing that at least part of the reason China has become the world’s biggest manufacturing center is traceable to the kind of mercantilist practices supposedly banned by WTO rules.
What brought coronavirus into this discussion was Washington’s realization early in the pandemic of how dependent the U.S. has become on Chinese sources of drugs. The South China Morning Post reported in December that almost all of the ibuprofen and hydrocortisone, and most of the acetaminophen, consumed in the U.S. originates in China. So do many generic prescription drugs; even when they are manufactured in India or other countries, they often require active ingredients made only in China.
The U.S. Food and Drug Administration admits it lacks the capacity to track the supply chain of imported drugs. The value of those pharmaceutical imports, at $350 million per day, exceeds the value of cell phone imports. The U.S. thus may have developed vulnerabilities in the availability of drugs needed during wartime without knowing it.
This is not a xenophobic fantasy. The last penicillin producer in the U.S. closed over a decade ago after facing price competition from heavily subsidized Chinese companies. The South China Morning Post found 80% of antibiotics consumed in the U.S. are made in China.
There is no indication this occurred with a military purpose in mind, but that doesn’t mean Beijing wouldn’t leverage what one author calls its “global chokehold” on drugs and their constituent compounds in a conflict.
But drugs are just the beginning of the problem. The U.S. h.
This document provides an overview and introduction to a paper that will examine the military industrial complex and its effects on government spending, particularly during the Cold War and post-Cold War periods. The introduction outlines that the paper will include a brief history of the MIC, an examination of how its constituent parts interact to form the complex system, an analysis of defense spending data, and a summary of the implications. It defines the MIC as the interaction between public and private sectors in defense and notes its real implications for politics, economics, and society both domestically and globally.
Government Policy and International Trade Chapter 7 219Itroutmanboris
Government Policy and International Trade Chapter 7 219
In the 15 years up to 2015, China increased its steel
production fivefold as it forged the steel products
demanded by its huge boom in construction and
infrastructure spending. By 2015, the country produced
800 million tons of steel a year, half of the world’s
annual output. However, in 2015 the bottom fell out of
the Chinese domestic market for steel. The economy
slowed down, and the government shifted its priorities
away from massive infrastructure investments and to-
ward boosting consumer spending. By the end of 2015,
Chinese steelmakers were estimated to be producing
300 million more tons of steel a year than required for
domestic consumption.
With prices for steel slumping, China’s largest 101
steel firms lost more than $12 billion in 2015, roughly
twice what they made in profits during 2014. Not sur-
prisingly, the Chinese are seeking to export this un-
wanted product, even if it is at a loss. China exported
more than 100 million tons of steel for the first time in
2015, making its steel exports alone larger than the pro-
duction of any other country in the world except for
Japan. The prices for Chinese steel products appear to
be at least 10 percent lower outside of China than within
the country.
Those low-priced exports are having a devastating im-
pact on steelmakers around the globe. American produc-
ers have responded by clamoring for action from the U.S.
Commerce Department to stop what they perceive to be
the illegal dumping of steel products below the costs of
production. Moreover, they have argued that cheap steel
from China has also persuaded producers in India, Italy,
South Korea, and Taiwan to dump their excess produc-
tion on the world market, further harming U.S. produc-
ers. In November 2015, the Commerce Department ruled
that all of these countries except Taiwan were dumping
steel and placed duties as high as 236 percent on some
imports of foreign steel. In late December, the Commerce
Department ruled that China was also selling corrosion-
resistant steel at unfairly low prices and placed an addi-
tional 256 percent tariff on such imports. This erected a
huge barrier to certain Chinese steel imports into the
United States.
The European Union also took similar steps. The
United Kingdom has been particularly hard hit by
Chinese imports. Chinese imports now take 45 percent of
the UK market for steel rebar, up from nothing in 2010.
Overall, steel imports from China doubled between 2014
and 2015. The United Kingdom lost some 4,000 steelmaking
jobs in the second half of 2015 as the Chinese grabbed
market share. Elsewhere in Europe, the Luxembourg-
based steel giant ArcelorMittal blamed dumping by Chinese
firms for a $8 billion loss in 2015.
In response, in January 2016, the EU placed a
13 percent tariff on imports of Chinese steel. EU steel-
makers called this totally inadequate, particularly given
the much large tariff ...
Steel tariffs, pro and conThe Washington Times (Washington, .docxdessiechisomjj4
Steel tariffs, pro and con
The Washington Times (Washington, DC), January 22, 2003
Byline: THE WASHINGTON TIMES
The editorial endorsing the existing steel tariffs completely ignores the devastating consequences the
tariffs have had on steel-consuming companies in the United States ("The steel tariffs," Editorial,
Monday). Before declaring the steel tariffs a success, a closer look at the downside of tariffs is in
order.
The steel tariffs have led to price increases, supply disruptions and massive business and financial
losses to steel consumers in the United States. Many downstream industries are faced with the choice
of going out of business or moving overseas, resulting in many thousands of American manufacturing
workers losing their jobs. The tariff policy creates a situation in which steel producers are protected
from competition while their customers must continue to compete in the global marketplace against
foreign rivals with access to world-priced steel.
I also must take exception to the editorial's statement that the steel industry "could become dependent
on tariff protection." Could become dependent? The U.S. steel industry has been shielded from
international competition via tariffs, quotas, duties, voluntary restraint agreements and other trade
restrictions by presidential administrations dating to Lyndon B. Johnson's. The latest bid by steel
producers to expand tariffs to developing countries is yet more evidence that no amount of trade
protection will ever satisfy steel producers.
Instead of considering new tariffs that would further damage steel users, the Bush administration
needs to take a closer look at evidence of widespread damage to the economy caused by the tariffs.
The only way to end this cycle of protection is to encourage steel producers to compete in the global
market - like their customers do every day.
JON E. JENSON
President
Consuming Industries Trade Action Coalition
Independence, Ohio
*
I applaud The Washington Times for recognizing the wisdom of President Bush's imposition of
temporary steel tariffs. The steel industry is using this temporary reprieve from low-cost, often illegally
dumped imports to restructure and consolidate. Many inefficient steel companies have gone out of
business (30 at last count), leaving the survivors with the opportunity to improve their order books at
increased transaction prices, thus providing much-needed capital for modernization.
Unfortunately, serious economic problems still will face those survivors when the tariffs expire in 2005.
A look at this nation's November trade deficit - a record $40 billion - provides a view of the future for all
of American industry, not just steel.
The trade figures show that goods manufactured in the United States are not very competitive versus
those manufactured abroad. The American steel-consuming industries knew this and fought the steel
tariffs without success. Without the steel tariffs, our nation would have become totally de.
This document discusses the challenges facing Minnesota's iron mining industry. It summarizes that iron mining has historically played an important economic role in Minnesota but has faced difficulties recently due to falling iron ore prices and steel imports. The US steel industry argues that China and other countries are illegally dumping steel at below-cost prices. This has led to layoffs in Minnesota's iron mines and economic impacts on surrounding communities. The steel industry and politicians are pushing for stronger trade laws and enforcement to address unfair trade practices from countries like China.
This brief argues that the Presidential Proclamation banning certain visas violates the United States' obligations under the World Trade Organization's General Agreement on Trade in Services (GATS). As a WTO member, the US is bound by GATS, which requires admitting L-1 intracompany transferee visas. The Proclamation banning these visas contradicts this commitment and could lead other WTO members to challenge the US through the WTO dispute resolution process, potentially authorizing retaliation against American exports and companies abroad.
Jobs and Protectionism in the Stimulus Package Preside.docxchristiandean12115
Jobs and Protectionism in the Stimulus
Package
President Obama's spending bill promotes the use of
American goods and labor. Despite foreign and domestic
protests, the language is mainly rhetorical
Members of the Senate and the House hash out differences between the two versions of the
economic stimulus legislation at the U.S. Capitol on Feb. 11 Chip Somodevilla/Getty Images
By Moira Herbst
The $787 billion spending legislation being signed on Feb. 17 by President Barack Obama is
designed to jolt some life into a moribund economy. Already, though, provisions to use the
money to "buy American"—whether that means American iron, steel, or labor—is sparking a
debate about whether such rules in a global economy amount to protectionism.
Organized labor and small U.S. manufacturers won an amendment to the stimulus bill to ensure
that more materials used on construction and infrastructure are made in the U.S. Critics of the H-
1B visa program won tougher rules governing when banks that are bailed out by the Troubled
Assets Relief Program (TARP) can fill jobs with skilled immigrants.
The final language drew criticism from abroad, where editorials and government officials
warned it could run afoul of trade agreements. But both provisions are less stringent than earlier
versions had been, and neither is likely to have a radical effect on how stimulus spending takes
shape.
http://www.businessweek.com/bios/Moira_Herbst.htm
Opposition from Exporters
The clearest attempt to wall off foreign companies from U.S. spending came in a "Buy
American" provision. That rule requires that only U.S. iron, steel, and other manufactured goods
be used for public buildings and public works funded under the bill. However, it comes with
several key caveats. For one, the language states that the Buy American policy must not violate
U.S. obligations under existing international trade agreements. Nor does the rule apply if
American goods aren't available in sufficient quantities or if they'll increase the cost of the
overall project by more than 25%. Federal highway, transit, and airport projects are already
covered by similar Buy American requirements.
The battle over the provision had been contentious. On Feb. 3, 100 business groups and
companies—including the U.S. Chamber of Commerce, General Electric (GE), Caterpillar
(CAT), and other major construction, defense, and high-tech companies—wrote a letter to Senate
leaders warning that a far-reaching Buy American rule "will harm American workers and
companies across the entire U.S. economy, undermine U.S. global engagement, and result in
mirror-image trade restrictions abroad that would put at risk huge amounts of American exports."
But advocates of the provision—including the Alliance for American Manufacturing, a
partnership of manufacturing companies and the United Steelworkers union—said such rules are
needed to stem the tide of layoffs in th.
The document discusses the trade tensions between the US and other countries regarding steel and aluminum tariffs. It provides background on President Trump's views on restarting the US steel industry and his belief that other countries were taking advantage of the US in trade. It also summarizes the reactions of the US, China, EU, and other countries to the tariffs. The EU and others threatened retaliation while China said it did not want a trade war but was not afraid of one. The document also discusses the potential impacts on domestic US industries and jobs as well as other countries' economies and strategies for responding to the trade tensions.
EDITORS PICK2,374 views Mar 30, 2020,0937 am EDTForbesCoro.docxbudabrooks46239
EDITORS' PICK|2,374 views| Mar 30, 2020,09:37 am EDT
Forbes
Coronavirus Highlights U.S. Strategic Vulnerabilities Spawned By Over-Reliance On China
Loren ThompsonSenior Contributor
Aerospace & Defense
I write about national security, especially its business dimensions.
President Trump has been criticized for highlighting the Chinese origins of the current coronavirus crisis. Whether such comments are constructive or not, the crisis has provoked a broader debate about the role that China plays in the American economy.
In the two decades since Beijing was admitted to the World Trade Organization, it has gradually eclipsed America’s preeminence as a manufacturing nation. For instance, the U.S. had two dozen aluminum smelters within its borders when the new century began; by the time President Trump took office, only five remained of which two were functioning at full capacity.
Chinese smelters have no inherent pricing advantage, so critics have correctly concluded that China became the world’s largest producer (and exporter) of aluminum through the use of subsidies and other trade-distorting practices. A similar pattern prevails in steel, which explains why both industries became early targets of Trump tariffs.
More broadly, China has tended to dominate production of every new technology in recent years, from smart phones to wind turbines to solar panels to commercial drones. U.S. officials are unanimous in agreeing that at least part of the reason China has become the world’s biggest manufacturing center is traceable to the kind of mercantilist practices supposedly banned by WTO rules.
What brought coronavirus into this discussion was Washington’s realization early in the pandemic of how dependent the U.S. has become on Chinese sources of drugs. The South China Morning Post reported in December that almost all of the ibuprofen and hydrocortisone, and most of the acetaminophen, consumed in the U.S. originates in China. So do many generic prescription drugs; even when they are manufactured in India or other countries, they often require active ingredients made only in China.
The U.S. Food and Drug Administration admits it lacks the capacity to track the supply chain of imported drugs. The value of those pharmaceutical imports, at $350 million per day, exceeds the value of cell phone imports. The U.S. thus may have developed vulnerabilities in the availability of drugs needed during wartime without knowing it.
This is not a xenophobic fantasy. The last penicillin producer in the U.S. closed over a decade ago after facing price competition from heavily subsidized Chinese companies. The South China Morning Post found 80% of antibiotics consumed in the U.S. are made in China.
There is no indication this occurred with a military purpose in mind, but that doesn’t mean Beijing wouldn’t leverage what one author calls its “global chokehold” on drugs and their constituent compounds in a conflict.
But drugs are just the beginning of the problem. The U.S. h.
This document provides an overview and introduction to a paper that will examine the military industrial complex and its effects on government spending, particularly during the Cold War and post-Cold War periods. The introduction outlines that the paper will include a brief history of the MIC, an examination of how its constituent parts interact to form the complex system, an analysis of defense spending data, and a summary of the implications. It defines the MIC as the interaction between public and private sectors in defense and notes its real implications for politics, economics, and society both domestically and globally.
Government Policy and International Trade Chapter 7 219Itroutmanboris
Government Policy and International Trade Chapter 7 219
In the 15 years up to 2015, China increased its steel
production fivefold as it forged the steel products
demanded by its huge boom in construction and
infrastructure spending. By 2015, the country produced
800 million tons of steel a year, half of the world’s
annual output. However, in 2015 the bottom fell out of
the Chinese domestic market for steel. The economy
slowed down, and the government shifted its priorities
away from massive infrastructure investments and to-
ward boosting consumer spending. By the end of 2015,
Chinese steelmakers were estimated to be producing
300 million more tons of steel a year than required for
domestic consumption.
With prices for steel slumping, China’s largest 101
steel firms lost more than $12 billion in 2015, roughly
twice what they made in profits during 2014. Not sur-
prisingly, the Chinese are seeking to export this un-
wanted product, even if it is at a loss. China exported
more than 100 million tons of steel for the first time in
2015, making its steel exports alone larger than the pro-
duction of any other country in the world except for
Japan. The prices for Chinese steel products appear to
be at least 10 percent lower outside of China than within
the country.
Those low-priced exports are having a devastating im-
pact on steelmakers around the globe. American produc-
ers have responded by clamoring for action from the U.S.
Commerce Department to stop what they perceive to be
the illegal dumping of steel products below the costs of
production. Moreover, they have argued that cheap steel
from China has also persuaded producers in India, Italy,
South Korea, and Taiwan to dump their excess produc-
tion on the world market, further harming U.S. produc-
ers. In November 2015, the Commerce Department ruled
that all of these countries except Taiwan were dumping
steel and placed duties as high as 236 percent on some
imports of foreign steel. In late December, the Commerce
Department ruled that China was also selling corrosion-
resistant steel at unfairly low prices and placed an addi-
tional 256 percent tariff on such imports. This erected a
huge barrier to certain Chinese steel imports into the
United States.
The European Union also took similar steps. The
United Kingdom has been particularly hard hit by
Chinese imports. Chinese imports now take 45 percent of
the UK market for steel rebar, up from nothing in 2010.
Overall, steel imports from China doubled between 2014
and 2015. The United Kingdom lost some 4,000 steelmaking
jobs in the second half of 2015 as the Chinese grabbed
market share. Elsewhere in Europe, the Luxembourg-
based steel giant ArcelorMittal blamed dumping by Chinese
firms for a $8 billion loss in 2015.
In response, in January 2016, the EU placed a
13 percent tariff on imports of Chinese steel. EU steel-
makers called this totally inadequate, particularly given
the much large tariff ...
Steel tariffs, pro and conThe Washington Times (Washington, .docxdessiechisomjj4
Steel tariffs, pro and con
The Washington Times (Washington, DC), January 22, 2003
Byline: THE WASHINGTON TIMES
The editorial endorsing the existing steel tariffs completely ignores the devastating consequences the
tariffs have had on steel-consuming companies in the United States ("The steel tariffs," Editorial,
Monday). Before declaring the steel tariffs a success, a closer look at the downside of tariffs is in
order.
The steel tariffs have led to price increases, supply disruptions and massive business and financial
losses to steel consumers in the United States. Many downstream industries are faced with the choice
of going out of business or moving overseas, resulting in many thousands of American manufacturing
workers losing their jobs. The tariff policy creates a situation in which steel producers are protected
from competition while their customers must continue to compete in the global marketplace against
foreign rivals with access to world-priced steel.
I also must take exception to the editorial's statement that the steel industry "could become dependent
on tariff protection." Could become dependent? The U.S. steel industry has been shielded from
international competition via tariffs, quotas, duties, voluntary restraint agreements and other trade
restrictions by presidential administrations dating to Lyndon B. Johnson's. The latest bid by steel
producers to expand tariffs to developing countries is yet more evidence that no amount of trade
protection will ever satisfy steel producers.
Instead of considering new tariffs that would further damage steel users, the Bush administration
needs to take a closer look at evidence of widespread damage to the economy caused by the tariffs.
The only way to end this cycle of protection is to encourage steel producers to compete in the global
market - like their customers do every day.
JON E. JENSON
President
Consuming Industries Trade Action Coalition
Independence, Ohio
*
I applaud The Washington Times for recognizing the wisdom of President Bush's imposition of
temporary steel tariffs. The steel industry is using this temporary reprieve from low-cost, often illegally
dumped imports to restructure and consolidate. Many inefficient steel companies have gone out of
business (30 at last count), leaving the survivors with the opportunity to improve their order books at
increased transaction prices, thus providing much-needed capital for modernization.
Unfortunately, serious economic problems still will face those survivors when the tariffs expire in 2005.
A look at this nation's November trade deficit - a record $40 billion - provides a view of the future for all
of American industry, not just steel.
The trade figures show that goods manufactured in the United States are not very competitive versus
those manufactured abroad. The American steel-consuming industries knew this and fought the steel
tariffs without success. Without the steel tariffs, our nation would have become totally de.
This document discusses the challenges facing Minnesota's iron mining industry. It summarizes that iron mining has historically played an important economic role in Minnesota but has faced difficulties recently due to falling iron ore prices and steel imports. The US steel industry argues that China and other countries are illegally dumping steel at below-cost prices. This has led to layoffs in Minnesota's iron mines and economic impacts on surrounding communities. The steel industry and politicians are pushing for stronger trade laws and enforcement to address unfair trade practices from countries like China.
This brief argues that the Presidential Proclamation banning certain visas violates the United States' obligations under the World Trade Organization's General Agreement on Trade in Services (GATS). As a WTO member, the US is bound by GATS, which requires admitting L-1 intracompany transferee visas. The Proclamation banning these visas contradicts this commitment and could lead other WTO members to challenge the US through the WTO dispute resolution process, potentially authorizing retaliation against American exports and companies abroad.
WWII CLASSShort and constructive response to classmates.docxshericehewat
WWII CLASS
Short and constructive response to classmates
Respond to classmates and add resources if necessary under each response.
Respond to Melissa Karnath
While both sides of this conflict had resources of both manpower and equipment available to them from their own countries and also from other countries the turning point of the conflict seemed to develop when changes were made.
The Soviet side was receiving food resources from Great Britain and the United States along with some other raw resources. Stalin also put a great emphasize on production of weapons. He instituted a mandatory number of work hours in order for citizens to receive food. "Stalin
focused all efforts on military production and extorting maximum labour from a workforce whose only guarantee of food was to turn up at the factory and work the arduous 12-hour shifts." 1 The Soviet side also began to make changes in their tanks, which made them more equivalent to the German tanks. Soviet tanks became more heavily armed and sturdy. The Soviet side also began using radios with their tanks. Radios greatly increased communication with their tank units allowing for an increase in mobilization, organization along with fire and maneuver.
The Soviet side also evaluated and made changes to their intelligence and tactics. "Camouflage, surprise and misinformation were brilliantly exploited to keep the German army in the dark about major Soviet intentions." 1 With these changes the Soviets changed the way they fought during offensive and defensive measures taking the German forces by surprise. This kept the German forces guessing and made the Soviet forces more effective against the Germans.
"Millions of Soviets worked in camp labourers who worked fully for the war effort. They kept up the production of food, weapons and equipment."1
The changes and advancements within the Soviet Army helped to bolster the impact and effectiveness of the Soviet Army during the war with Germany combined with the constant mass production of military equipment by the Soviet civilian population.
1.The Soviet-German War 1941 - 1945 By Overlay, Richard.
http://www.bbc.co.uk/history/worldwars/wwtwo/soviet_german_war_01.shtml
Short and constructive response to classmates
Respond to classmates and add resources if necessary under each response.
Respond
Gabriel
One significant change that World War II brought on pre-existing racial barriers was lived by Japanese-Americans in the United States. Japanese-americans believed they could gain citizenship by the passage of several laws in 1924. But, the attack in Pearl Harbor changed a lot of things for them. Not only in Hawaii but also in the west coast. More than 110,000 Japanese-Americans were forced to leave everything behind and forced to live in one of ten relocation centres. This kind racism had not been seen done to German-Americans or Italian-Americans. Even after the Supreme Court ruled that the detention of Japanese-Americans whose loyalty .
The document analyzes trade relations between the US and China over time. It discusses how the two nations have become highly economically interdependent, with China manufacturing many inexpensive goods for American consumers and relying heavily on the US market. However, tensions exist due to the US trade deficit with China and accusations that China keeps its currency artificially low. The financial crisis further strained relations and led to "Buy American" policies on both sides. Any major changes in policies could significantly damage both economies due to their close ties.
This document summarizes a paper analyzing how key arms exporting states have implemented the OECD Anti-Bribery Convention. It discusses the convention's development from US domestic law to an international agreement. It analyzes implementation by the US, France, and UK, as well as accession by non-OECD states Russia and Israel. The US has been the most committed enforcer, while the UK has lagged. France has done well, motivated partly by domestic politics. Overall implementation has been uneven among states.
First in a two-part Blog on the Rare Earths (RE) sector, a Black Swan event and the impact of a United States (US) potential new Republican Administration.
This document summarizes a report titled "The Strategic Defense: America's Next National Security Concept" authored by Major Mark W. Elfers of the U.S. Marine Corps. The report argues that due to economic challenges, the U.S. needs to adopt a new national security concept called the "Strategic Defense." This concept would involve maintaining a credible military force but only using it defensively to defeat attacking enemies, rather than offensively attacking others. The report outlines this concept and addresses counterarguments, concluding that a Strategic Defense aligns with America's founding principles and would help ensure long-term national security.
This file describes how increasing trade barriers in the US can deteriorate the economic situation of poorer households and increase wealth inequality.
2. The challenges of strategic management in the twenty-first century.pdfValerie Felton
The document discusses the challenges of strategic management in the 21st century. It notes that markets are experiencing increasing turbulence, volatility, complexity and ambiguity. Traditional strategic planning tools may be inadequate for today's fast-changing environments. Scenario-based planning can help companies cope with today's uncertainties by developing multiple potential scenarios and strategies. The document also examines key dimensions of the uncertain environment including volatility, complexity, and ambiguity in factors like the global marketplace, variety of products, stakeholder interests, and information overload.
This document provides an overview of Chapter 25 from the textbook "Out of Many: A History of the American People, Seventh Edition". The chapter discusses World War II and is divided into several sections, including: The Coming of World War II, The Great Arsenal of Democracy, The Home Front, Men and Women in Uniform, The World at War, and The Last Stages of War. It describes the US mobilization for war through increased military spending and production, the economic boom as the country shifted to a wartime economy, the entrance of more women and minorities into the workforce, and the social changes on the home front despite no direct fighting on US soil.
The federal reserve - 331 Words - NerdySeal. Federal Reserve system Essay Example | Topics and Well Written Essays .... Risk Management - the US Government, the Federal Reserve Essay Example .... The US Monetary Policy: Federal Reserve - 878 Words | Essay Example. Federal Reserve System. Monetary Policy: The Federal Reserve | Free Essay Example. Essay about the federal reserve system was created. Federal Reserve Paper Essay Example | Topics and Well Written Essays .... The Functions of the Federal Reserve Essay Example | Topics and Well .... Federal Reserve and the Open Market Essay Example | Topics and Well .... federal reserve.. The Federal Reserve Essay - P a g e | 1 The Federal Reserve BUS 2203 .... Structure Underlying the Federal Reserve Essay Example | Topics and .... The Role of the Federal Reserve - 954 Words | Essay Example. The Federal Reserve was effective/successful in its management of the Essay. Federal Reserve Essay Example | Topics and Well Written Essays - 500 .... Read «The Federal Reserve» Essay Sample for Free at SupremeEssays.com. The Federal Reserve Essay.
This document summarizes the challenges of transatlantic defense cooperation due to US export controls like ITAR. It discusses debates around ITAR and efforts at reform, how European firms try to deal with the restrictions, and possibilities for the future. Key points include: ITAR is seen by some as protectionist rather than for security, reforms have had limited success, European firms pursue bilateral US relationships or consolidation to access technologies needed for projects like the Joint Strike Fighter. The UK-US Defense Trade Cooperation Treaty could streamline transfers if ratified by the US Senate.
This document outlines the assignments, discussion questions, and final paper for POL 201 Entire Course: Ashford University. It includes assignments on the basic principles of the US Constitution, civil liberties and national security, the roles and relationships between levels of government, the Supreme Court process, the electoral college, the media, and policies addressing the 2008 economic crisis and environmental policy. Students are asked to discuss and analyze these various topics related to American government and politics.
The document summarizes media coverage of the Aviation Week's A&D Technology & Requirements (ADTR) Conference 2011 held in Washington DC from February 16-17. It discusses that over 200 senior defense executives attended the conference to discuss the US Department of Defense's spending plans, priority programs, new technologies, and military requirements. Prominent speakers like Ashton Carter and Admiral Gary Roughead attracted significant media attention, resulting in over 110 articles in top publications. The document provides a list of registered media attendees and summarizes some of the articles that were produced covering comments from speakers and topics discussed at the conference.
Conflicts Affecting Economic Trade Between the UnitedSta.docxmaxinesmith73660
Conflicts Affecting Economic Trade Between the UnitedStates and Mexico
Policy Paper Proposal
John Doe
GOVT 2305-2XXX Spring 2018
Dr. J. Mark Skorick
Word Count (206)
On January 1, 1994, the North American Free Trade Agreement (NAFTA) became law. NAFTA is an agreement between the United States, Mexico, and Canada that allows free trade across its borders and brings economic growth between the three countries (Hymson et al. 220). The policy paper will speak specifically on the economic trade between the United States and Mexico. Currently, there are worries about the security of the United States border due to several detrimental matters that have occurred. Some major issues that have occurred since NAFTA became law include: drug smuggling by criminal cartels, human smuggling into the United States, money laundering and sex trafficking, to name a few (Cooper 471-2). While there are some risks that pose a threat to US border security, the United States has greatly benefited from the economic free trade with Mexico (Gallaher 331). Such benefits include: reduced costs of goods, increased job growth, and Mexico becoming one of the largest auto exporters to the United States (Gallaher 332). This policy paper will outline the advantages and disadvantages United States and Mexican foreign policy concerning economic trade policy. The paper will investigate various ways that both the United States and Mexico can improve the border’s security so economic trade can continue seamlessly.
Works Cited
COOPER, JAMES M. "The Rise of Private Actors along the United States-Mexico Border." Wisconsin International Law Journal, vol. 33, no. 3, Winter2015, pp. 470-511. EBSCOhost, dcccd.idm.oclc.org/login?url=http://search.ebscohost.com.dcccd.idm.oclc.org/login.aspx?direct=true&db=a9h&AN=113657684&site=ehost-live.
Gallaher, Carolyn. "Mexico, the Failed State Debate, and the Mérida Fix." Geographical Journal, vol. 182, no. 4, Dec. 2016, pp. 331-341. EBSCOhost, doi:10.1111/geoj.12166.
Hymson, Edward, et al. "Increasing Benefits and Reducing Harm Caused by the North American Free Trade Agreement." Southern Law Journal, vol. 19, no. 1, Fall2009, pp. 219-243. EBSCOhost, dcccd.idm.oclc.org/login?url=http://search.ebscohost.com.dcccd.idm.oclc.org/login.aspx?direct=true&db=a9h&AN=48238274&site=ehost-live.
1
Strengthening the United States Cybersecurity Relationship with China
Policy Paper Project
Jane Doe
GOVT 2305-2XXX
Dr. J. Mark Skorick
Spring 2018
Word Count (1636)
The United States and China are intense competitors for global dominance. The U.S. and China are the two largest economies in the world and the two nations are in constant economic competition. The two nations also compete politically and ideologically, with China being a communist state with harsh restrictions on freedom of speech and the U.S. being a representative democracy with strict protections for freedom of speech. As China seeks to surpass the United States in economic.
The document discusses the debate around free trade in the 2016 US presidential election. It provides background on the US shift towards expanding trade agreements since 2000 and the economic and foreign policy reasons for this. While trade has largely benefited the US economy overall, it has had uneven impacts across regions and industries. This has contributed to populism and criticism of trade agreements by candidates like Trump and Sanders, who have tapped into voter concerns about the economy. The impacts and politics of trade are expected to continue playing a role in the election.
This document is a report from the Council on Foreign Relations' Independent Task Force on Innovation and National Security. It finds that while the US historically led the world in technological innovation, fueled by heavy federal R&D investment following Sputnik, it now risks falling behind competitors like China. It recommends a national security innovation strategy focused on: 1) Restoring federal funding for R&D; 2) Attracting and educating a science and technology workforce; 3) Supporting technology adoption in the defense sector; and 4) Bolstering technology alliances. This will help ensure the US remains preeminent in emerging technologies critical for national security.
The document discusses challenges facing US defense innovation. It notes that while US defense spending remains the highest globally, it has declined in recent years due to budget constraints. This threatens US technological leadership, as other nations increase spending. The document outlines the history of US defense innovation and key actors like DOD, DARPA, and defense contractors. It analyzes issues like declining budgets, short-term thinking, acquisition problems, erosion of the defense industry, and rising foreign competition. Maintaining US innovation leadership will require restoring investment in defense R&D to develop new technologies and offset adversaries' capabilities despite limited budgets.
In
te
rn
at
io
na
lt
op
ic
s
E
co
no
m
ic
s
Editor
Stefan Schneider
+49 69 910-31790
[email protected]
Technical Assistant
Pia Johnson
+49 69 910-31777
[email protected]
Deutsche Bank Research
Frankfurt am Main
Germany
Internet: www.dbresearch.com
E-mail: [email protected]
Fax: +49 69 910-31877
Managing Director
Norbert Walter
October 1, 2004 Current Issues
The U.S. balance of payments: wide-
spread misconceptions and exaggerated
worries
• The U.S. balance of payments is by far the most confusing and least
understood area of the U.S. economy. The confusion is centered around the
large and rapidly growing deficits. Indeed, the deficit on the current account of
the balance of payments rose to new records, both in absolute and relative
terms.
• These developments created worries and fears regarding the sustainability of
the external deficits. However, closer examination of the issue shows that the
worries and fears are exaggerated and, most importantly, there are no short-
and medium-term solutions because of a number of structural reasons.
Mieczyslaw Karczmar, +1 212 586-3397 ([email protected])
Economic Adviser to DB Research
Guest authors express their own opinions, which may not necessarily be those of Deutsche Bank
Research.
October 1, 2004 Current Issues
Economics 3
The U.S. balance of payments is by far the most confusing and least
understood area of the U.S. economy. The confusion is centered
around the large and rapidly growing deficits. Indeed, the deficit on
the current account of the balance of payments rose from USD 474
billion in 2002 to USD 531 billion in 2003 and is estimated to reach
over USD 600 billion in 2004 (see table 1). In relative terms, the
deficits amount to 4.5%, 4.9% and 5.3% of GDP, respectively, in
those years. Both in absolute and relative terms, these are all-time
records.
The sustainability of external deficits
Persistent and rising external deficits have attracted increasing at-
tention of politicians, economists and the media. Needless to say,
the deficits are generally viewed as highly negative for the U.S.
economy and U.S. financial conditions. The main points of concern
are:
• Rising foreign indebtedness that might create financial difficulties
over time.
• A potential massive dollar depreciation needed to rectify the
situation.
• In an extreme case, a financial crisis as foreigners refuse to fi-
nance U.S. deficits and switch their capital to other places.
The media, regardless of their political outlook, have been
commenting on the U.S. external deficits for quite some time,
spreading fear and predicting all sorts of calamities, which
apparently sells newspapers well. About five years ago, in the fall of
1999, The New York Times ran an article with a pointed headline:
“The United States sets a record for living beyond its means;” and a
Barron’s article talked about a current account crisis and a ticking
time bomb.
Had t.
CIA Stratergic Communication - September 2004Khairi Aiman
This report is a product of the Defense Science Board (DSB). The DSB is a Federal
Advisory Committee established to provide independent advice to the Secretary of
Defense. Statements, opinions, conclusions, and recommendations in this report do
not necessarily represent the official position of the Department of Defense.
Please respond to the followingAnalyze ONE of the Neo-Piageti.docxSONU61709
Please respond to the following:
Analyze ONE of the Neo-Piagetians’ theories of cognitive development
Examine the primary ways in which the chosen theory falls short in addressing adult learners from a different class, ethnicity, gender, and/or social context.
Suggest specific implications of applying the chosen conceptualization within a learning setting comprising adult learners. Justify your response.
.
Please respond to the followingBased on the discussion prepar.docxSONU61709
Please respond to the following:
Based on the discussion preparation for this week, suggest two biologically rooted approaches that instructors may use in order to facilitate learning of one particular task. Illustrate the process by which embodied learning would foster a deeper learning of the task in question.
.
Please respond to the following in an approx. 5-6 page paper, double.docxSONU61709
Please respond to the following in an approx. 5-6 page paper, double-spaced, 12 point font:
Considering everything we have learned to date about Palestine: the history of the region, the contemporary events leading to the establishment of Israel, and the different factions involved, was the failure to find a sustainable solution for all sides inevitable? Why or why not?
Your essay must have a clear thesis, and be supported by specific examples from the material we have covered (lecture, text, etc.). You must also draw on some of the primary sources (documents), in order to support your position.
I will be sending you my id and password for all the presentation lectures.
.
Please respond to the followingImagine you have recently .docxSONU61709
Please respond to the following:
Imagine you have recently been hired to be the Chief Learning Officer (CLO) for a corporation and have been tasked to establish a corporate university.
Discuss the various types of training media you would use to educate your corporate students and how these media would be put to use.
Make sure to include a rationale and at least one citation from your reading.
.
More Related Content
Similar to 1. How do domestic considerations make foreign and security polici.docx
WWII CLASSShort and constructive response to classmates.docxshericehewat
WWII CLASS
Short and constructive response to classmates
Respond to classmates and add resources if necessary under each response.
Respond to Melissa Karnath
While both sides of this conflict had resources of both manpower and equipment available to them from their own countries and also from other countries the turning point of the conflict seemed to develop when changes were made.
The Soviet side was receiving food resources from Great Britain and the United States along with some other raw resources. Stalin also put a great emphasize on production of weapons. He instituted a mandatory number of work hours in order for citizens to receive food. "Stalin
focused all efforts on military production and extorting maximum labour from a workforce whose only guarantee of food was to turn up at the factory and work the arduous 12-hour shifts." 1 The Soviet side also began to make changes in their tanks, which made them more equivalent to the German tanks. Soviet tanks became more heavily armed and sturdy. The Soviet side also began using radios with their tanks. Radios greatly increased communication with their tank units allowing for an increase in mobilization, organization along with fire and maneuver.
The Soviet side also evaluated and made changes to their intelligence and tactics. "Camouflage, surprise and misinformation were brilliantly exploited to keep the German army in the dark about major Soviet intentions." 1 With these changes the Soviets changed the way they fought during offensive and defensive measures taking the German forces by surprise. This kept the German forces guessing and made the Soviet forces more effective against the Germans.
"Millions of Soviets worked in camp labourers who worked fully for the war effort. They kept up the production of food, weapons and equipment."1
The changes and advancements within the Soviet Army helped to bolster the impact and effectiveness of the Soviet Army during the war with Germany combined with the constant mass production of military equipment by the Soviet civilian population.
1.The Soviet-German War 1941 - 1945 By Overlay, Richard.
http://www.bbc.co.uk/history/worldwars/wwtwo/soviet_german_war_01.shtml
Short and constructive response to classmates
Respond to classmates and add resources if necessary under each response.
Respond
Gabriel
One significant change that World War II brought on pre-existing racial barriers was lived by Japanese-Americans in the United States. Japanese-americans believed they could gain citizenship by the passage of several laws in 1924. But, the attack in Pearl Harbor changed a lot of things for them. Not only in Hawaii but also in the west coast. More than 110,000 Japanese-Americans were forced to leave everything behind and forced to live in one of ten relocation centres. This kind racism had not been seen done to German-Americans or Italian-Americans. Even after the Supreme Court ruled that the detention of Japanese-Americans whose loyalty .
The document analyzes trade relations between the US and China over time. It discusses how the two nations have become highly economically interdependent, with China manufacturing many inexpensive goods for American consumers and relying heavily on the US market. However, tensions exist due to the US trade deficit with China and accusations that China keeps its currency artificially low. The financial crisis further strained relations and led to "Buy American" policies on both sides. Any major changes in policies could significantly damage both economies due to their close ties.
This document summarizes a paper analyzing how key arms exporting states have implemented the OECD Anti-Bribery Convention. It discusses the convention's development from US domestic law to an international agreement. It analyzes implementation by the US, France, and UK, as well as accession by non-OECD states Russia and Israel. The US has been the most committed enforcer, while the UK has lagged. France has done well, motivated partly by domestic politics. Overall implementation has been uneven among states.
First in a two-part Blog on the Rare Earths (RE) sector, a Black Swan event and the impact of a United States (US) potential new Republican Administration.
This document summarizes a report titled "The Strategic Defense: America's Next National Security Concept" authored by Major Mark W. Elfers of the U.S. Marine Corps. The report argues that due to economic challenges, the U.S. needs to adopt a new national security concept called the "Strategic Defense." This concept would involve maintaining a credible military force but only using it defensively to defeat attacking enemies, rather than offensively attacking others. The report outlines this concept and addresses counterarguments, concluding that a Strategic Defense aligns with America's founding principles and would help ensure long-term national security.
This file describes how increasing trade barriers in the US can deteriorate the economic situation of poorer households and increase wealth inequality.
2. The challenges of strategic management in the twenty-first century.pdfValerie Felton
The document discusses the challenges of strategic management in the 21st century. It notes that markets are experiencing increasing turbulence, volatility, complexity and ambiguity. Traditional strategic planning tools may be inadequate for today's fast-changing environments. Scenario-based planning can help companies cope with today's uncertainties by developing multiple potential scenarios and strategies. The document also examines key dimensions of the uncertain environment including volatility, complexity, and ambiguity in factors like the global marketplace, variety of products, stakeholder interests, and information overload.
This document provides an overview of Chapter 25 from the textbook "Out of Many: A History of the American People, Seventh Edition". The chapter discusses World War II and is divided into several sections, including: The Coming of World War II, The Great Arsenal of Democracy, The Home Front, Men and Women in Uniform, The World at War, and The Last Stages of War. It describes the US mobilization for war through increased military spending and production, the economic boom as the country shifted to a wartime economy, the entrance of more women and minorities into the workforce, and the social changes on the home front despite no direct fighting on US soil.
The federal reserve - 331 Words - NerdySeal. Federal Reserve system Essay Example | Topics and Well Written Essays .... Risk Management - the US Government, the Federal Reserve Essay Example .... The US Monetary Policy: Federal Reserve - 878 Words | Essay Example. Federal Reserve System. Monetary Policy: The Federal Reserve | Free Essay Example. Essay about the federal reserve system was created. Federal Reserve Paper Essay Example | Topics and Well Written Essays .... The Functions of the Federal Reserve Essay Example | Topics and Well .... Federal Reserve and the Open Market Essay Example | Topics and Well .... federal reserve.. The Federal Reserve Essay - P a g e | 1 The Federal Reserve BUS 2203 .... Structure Underlying the Federal Reserve Essay Example | Topics and .... The Role of the Federal Reserve - 954 Words | Essay Example. The Federal Reserve was effective/successful in its management of the Essay. Federal Reserve Essay Example | Topics and Well Written Essays - 500 .... Read «The Federal Reserve» Essay Sample for Free at SupremeEssays.com. The Federal Reserve Essay.
This document summarizes the challenges of transatlantic defense cooperation due to US export controls like ITAR. It discusses debates around ITAR and efforts at reform, how European firms try to deal with the restrictions, and possibilities for the future. Key points include: ITAR is seen by some as protectionist rather than for security, reforms have had limited success, European firms pursue bilateral US relationships or consolidation to access technologies needed for projects like the Joint Strike Fighter. The UK-US Defense Trade Cooperation Treaty could streamline transfers if ratified by the US Senate.
This document outlines the assignments, discussion questions, and final paper for POL 201 Entire Course: Ashford University. It includes assignments on the basic principles of the US Constitution, civil liberties and national security, the roles and relationships between levels of government, the Supreme Court process, the electoral college, the media, and policies addressing the 2008 economic crisis and environmental policy. Students are asked to discuss and analyze these various topics related to American government and politics.
The document summarizes media coverage of the Aviation Week's A&D Technology & Requirements (ADTR) Conference 2011 held in Washington DC from February 16-17. It discusses that over 200 senior defense executives attended the conference to discuss the US Department of Defense's spending plans, priority programs, new technologies, and military requirements. Prominent speakers like Ashton Carter and Admiral Gary Roughead attracted significant media attention, resulting in over 110 articles in top publications. The document provides a list of registered media attendees and summarizes some of the articles that were produced covering comments from speakers and topics discussed at the conference.
Conflicts Affecting Economic Trade Between the UnitedSta.docxmaxinesmith73660
Conflicts Affecting Economic Trade Between the UnitedStates and Mexico
Policy Paper Proposal
John Doe
GOVT 2305-2XXX Spring 2018
Dr. J. Mark Skorick
Word Count (206)
On January 1, 1994, the North American Free Trade Agreement (NAFTA) became law. NAFTA is an agreement between the United States, Mexico, and Canada that allows free trade across its borders and brings economic growth between the three countries (Hymson et al. 220). The policy paper will speak specifically on the economic trade between the United States and Mexico. Currently, there are worries about the security of the United States border due to several detrimental matters that have occurred. Some major issues that have occurred since NAFTA became law include: drug smuggling by criminal cartels, human smuggling into the United States, money laundering and sex trafficking, to name a few (Cooper 471-2). While there are some risks that pose a threat to US border security, the United States has greatly benefited from the economic free trade with Mexico (Gallaher 331). Such benefits include: reduced costs of goods, increased job growth, and Mexico becoming one of the largest auto exporters to the United States (Gallaher 332). This policy paper will outline the advantages and disadvantages United States and Mexican foreign policy concerning economic trade policy. The paper will investigate various ways that both the United States and Mexico can improve the border’s security so economic trade can continue seamlessly.
Works Cited
COOPER, JAMES M. "The Rise of Private Actors along the United States-Mexico Border." Wisconsin International Law Journal, vol. 33, no. 3, Winter2015, pp. 470-511. EBSCOhost, dcccd.idm.oclc.org/login?url=http://search.ebscohost.com.dcccd.idm.oclc.org/login.aspx?direct=true&db=a9h&AN=113657684&site=ehost-live.
Gallaher, Carolyn. "Mexico, the Failed State Debate, and the Mérida Fix." Geographical Journal, vol. 182, no. 4, Dec. 2016, pp. 331-341. EBSCOhost, doi:10.1111/geoj.12166.
Hymson, Edward, et al. "Increasing Benefits and Reducing Harm Caused by the North American Free Trade Agreement." Southern Law Journal, vol. 19, no. 1, Fall2009, pp. 219-243. EBSCOhost, dcccd.idm.oclc.org/login?url=http://search.ebscohost.com.dcccd.idm.oclc.org/login.aspx?direct=true&db=a9h&AN=48238274&site=ehost-live.
1
Strengthening the United States Cybersecurity Relationship with China
Policy Paper Project
Jane Doe
GOVT 2305-2XXX
Dr. J. Mark Skorick
Spring 2018
Word Count (1636)
The United States and China are intense competitors for global dominance. The U.S. and China are the two largest economies in the world and the two nations are in constant economic competition. The two nations also compete politically and ideologically, with China being a communist state with harsh restrictions on freedom of speech and the U.S. being a representative democracy with strict protections for freedom of speech. As China seeks to surpass the United States in economic.
The document discusses the debate around free trade in the 2016 US presidential election. It provides background on the US shift towards expanding trade agreements since 2000 and the economic and foreign policy reasons for this. While trade has largely benefited the US economy overall, it has had uneven impacts across regions and industries. This has contributed to populism and criticism of trade agreements by candidates like Trump and Sanders, who have tapped into voter concerns about the economy. The impacts and politics of trade are expected to continue playing a role in the election.
This document is a report from the Council on Foreign Relations' Independent Task Force on Innovation and National Security. It finds that while the US historically led the world in technological innovation, fueled by heavy federal R&D investment following Sputnik, it now risks falling behind competitors like China. It recommends a national security innovation strategy focused on: 1) Restoring federal funding for R&D; 2) Attracting and educating a science and technology workforce; 3) Supporting technology adoption in the defense sector; and 4) Bolstering technology alliances. This will help ensure the US remains preeminent in emerging technologies critical for national security.
The document discusses challenges facing US defense innovation. It notes that while US defense spending remains the highest globally, it has declined in recent years due to budget constraints. This threatens US technological leadership, as other nations increase spending. The document outlines the history of US defense innovation and key actors like DOD, DARPA, and defense contractors. It analyzes issues like declining budgets, short-term thinking, acquisition problems, erosion of the defense industry, and rising foreign competition. Maintaining US innovation leadership will require restoring investment in defense R&D to develop new technologies and offset adversaries' capabilities despite limited budgets.
In
te
rn
at
io
na
lt
op
ic
s
E
co
no
m
ic
s
Editor
Stefan Schneider
+49 69 910-31790
[email protected]
Technical Assistant
Pia Johnson
+49 69 910-31777
[email protected]
Deutsche Bank Research
Frankfurt am Main
Germany
Internet: www.dbresearch.com
E-mail: [email protected]
Fax: +49 69 910-31877
Managing Director
Norbert Walter
October 1, 2004 Current Issues
The U.S. balance of payments: wide-
spread misconceptions and exaggerated
worries
• The U.S. balance of payments is by far the most confusing and least
understood area of the U.S. economy. The confusion is centered around the
large and rapidly growing deficits. Indeed, the deficit on the current account of
the balance of payments rose to new records, both in absolute and relative
terms.
• These developments created worries and fears regarding the sustainability of
the external deficits. However, closer examination of the issue shows that the
worries and fears are exaggerated and, most importantly, there are no short-
and medium-term solutions because of a number of structural reasons.
Mieczyslaw Karczmar, +1 212 586-3397 ([email protected])
Economic Adviser to DB Research
Guest authors express their own opinions, which may not necessarily be those of Deutsche Bank
Research.
October 1, 2004 Current Issues
Economics 3
The U.S. balance of payments is by far the most confusing and least
understood area of the U.S. economy. The confusion is centered
around the large and rapidly growing deficits. Indeed, the deficit on
the current account of the balance of payments rose from USD 474
billion in 2002 to USD 531 billion in 2003 and is estimated to reach
over USD 600 billion in 2004 (see table 1). In relative terms, the
deficits amount to 4.5%, 4.9% and 5.3% of GDP, respectively, in
those years. Both in absolute and relative terms, these are all-time
records.
The sustainability of external deficits
Persistent and rising external deficits have attracted increasing at-
tention of politicians, economists and the media. Needless to say,
the deficits are generally viewed as highly negative for the U.S.
economy and U.S. financial conditions. The main points of concern
are:
• Rising foreign indebtedness that might create financial difficulties
over time.
• A potential massive dollar depreciation needed to rectify the
situation.
• In an extreme case, a financial crisis as foreigners refuse to fi-
nance U.S. deficits and switch their capital to other places.
The media, regardless of their political outlook, have been
commenting on the U.S. external deficits for quite some time,
spreading fear and predicting all sorts of calamities, which
apparently sells newspapers well. About five years ago, in the fall of
1999, The New York Times ran an article with a pointed headline:
“The United States sets a record for living beyond its means;” and a
Barron’s article talked about a current account crisis and a ticking
time bomb.
Had t.
CIA Stratergic Communication - September 2004Khairi Aiman
This report is a product of the Defense Science Board (DSB). The DSB is a Federal
Advisory Committee established to provide independent advice to the Secretary of
Defense. Statements, opinions, conclusions, and recommendations in this report do
not necessarily represent the official position of the Department of Defense.
Similar to 1. How do domestic considerations make foreign and security polici.docx (18)
Please respond to the followingAnalyze ONE of the Neo-Piageti.docxSONU61709
Please respond to the following:
Analyze ONE of the Neo-Piagetians’ theories of cognitive development
Examine the primary ways in which the chosen theory falls short in addressing adult learners from a different class, ethnicity, gender, and/or social context.
Suggest specific implications of applying the chosen conceptualization within a learning setting comprising adult learners. Justify your response.
.
Please respond to the followingBased on the discussion prepar.docxSONU61709
Please respond to the following:
Based on the discussion preparation for this week, suggest two biologically rooted approaches that instructors may use in order to facilitate learning of one particular task. Illustrate the process by which embodied learning would foster a deeper learning of the task in question.
.
Please respond to the following in an approx. 5-6 page paper, double.docxSONU61709
Please respond to the following in an approx. 5-6 page paper, double-spaced, 12 point font:
Considering everything we have learned to date about Palestine: the history of the region, the contemporary events leading to the establishment of Israel, and the different factions involved, was the failure to find a sustainable solution for all sides inevitable? Why or why not?
Your essay must have a clear thesis, and be supported by specific examples from the material we have covered (lecture, text, etc.). You must also draw on some of the primary sources (documents), in order to support your position.
I will be sending you my id and password for all the presentation lectures.
.
Please respond to the followingImagine you have recently .docxSONU61709
Please respond to the following:
Imagine you have recently been hired to be the Chief Learning Officer (CLO) for a corporation and have been tasked to establish a corporate university.
Discuss the various types of training media you would use to educate your corporate students and how these media would be put to use.
Make sure to include a rationale and at least one citation from your reading.
.
Please respond to one (1) the followingRead the article e.docxSONU61709
Please respond to
one (1)
the following:
Read the article entitled
“Leadership Excellence: Communicate Your Vision”
. Next, assess the consequences of leaders not being able to communicate their change vision. Discuss the outcomes of a change management plan with an under-communicated vision of change. Develop a strategy for avoiding under-communicating the change vision.
View the video titled “John Kotter – Communicating a Vision for Change” (4 min 16 s) below. You may also view the video at
https://www.youtube.com/watch?v=bGVe3wRKmH0
. Next, assess the means of communication that are available to us as leaders. Review Kotter’s comments regarding communication, and efficient and effective communications. As the leader of a large organization implementing a change, develop a strategy for communicating your vision of change. Discuss the tools that the organization would use as well as the frequency of communication.
.
Please respond to the followingResearch on the Internet a rec.docxSONU61709
Please respond to the following:
Research on the Internet a recent public relations campaign that was undertaken to address a corporate scandal or misbehavior by a government official or celebrity, and study what part ethics played in the campaign, whether positively or negatively. Communications professor John Marston proposed a four-step model of the process through which public relations can influence public opinion. These steps include research, action, communication, and evaluation. Explain in detail how Marston’s four-step approach can be used to shape public opinion on the story you researched.
Research on the Internet a celebrity who has generated negative publicity in recent years for his/her sponsoring company. Businesses choose celebrities to endorse their products for a variety of reasons. Unfortunately, some of these celebrities act in ways that generate a lot of negative publicity for themselves and, by extension, for the sponsors who pay them. In the case of the celebrity you researched, explain in detail what actions you would take in this situation and why you would take them.
.
Please respond to Question One (bolded) and one additional ess.docxSONU61709
Please respond to
Question One
(bolded) and
one additional essay
question under
Question Two
of your choice. Please provide a complete essay response for both questions. Each response should be at least two pages (double- spaced, 12 pitch, Times New Roman). One reference page should accompany your work in APA format. Please place your name on each page. No late work will be accepted.
Question One:
As a student researcher, please introduce one theorist from the list below and describe what major components he or she has offered to those attempting to understand the development of children and/or families? Please include a photo of the selected theorist and critique his or her theory. For example, please discuss the strengths
and limitations of the individual’s theory.
Albert Bandura
David Liu
Erik Erikson
Harriette Pipes McAdoo
Jean Piaget
Lawrence Kohlberg
Lev Vygotsky
Question Two: (Choose One Question To Answer Below)
•
Linda Espinosa
•
Maria Montessori
•
Robert Coles
•
Sigmund Freud
•
Terry Cross
•
Urie Bronfenbrenner
What happens to children who experience consistent and high levels of stress and Cortisol? https://www.medstargeorgetown.org/ourservices/psychiatry/treatments/child-and-adolescent- psychiatryprogram/
How can parents work to protect children from Contaminants at School? http://www.niehs.nih.gov/research/supported/translational/peph/podc asts/school/index.cfm
Many children love being in or around water, whether it’s a backyard pool or a local beach. But without proper safety measures, water can be dangerous for young children. Please identify one academic journal article related to water safety? How can parents make water safety a priority? Please review this site: https://www.redcross.org/gethelp/how-to-prepare-for-emergencies/types-of-emergencies/watersafety.html
How could the Special Supplemental Nutrition Program for Women, Infants, and Children, also known as the WIC program, assist a single parent with limited income? What foods are eligible under this program?
hat steps can parents take to keep their children healthy?
https://www.cdc.gov/coronavirus/2019-ncov/daily-life- coping/children.html?CDC_AA_refVal=https%3A%2F%2Fwww.cdc.gov%2Fcoronavirus%2F2019- ncov%2Fprepare%2Fchildren.html
According to the NIEHS and EPA how can parents help prevent lead poisoning in children and youth? What is your state or local area doing to help eradicate lead poisoning?
*Student should utilize the referenced links above as well as other scholarly documents to develop their responses.
*Students must include a reference page for each question in APA format.
Important: Work submitted without a reference page
will not
be graded.
.
Please respond to the following in a substantive post (3–4 paragraph.docxSONU61709
Please respond to the following in a substantive post (3–4 paragraphs):
Explain the primary reasons project management causes a cultural change.
Describe the impact of that cultural change on integrative information technology.
Provide at least one example of a cultural change that project management can cause.
Be sure to provide full citations and references
.
Please respond to the followingDebate if failing to reje.docxSONU61709
Please respond to the following:
Debate if “failing to reject the null” is the same as “accepting the null.” Support your position with examples of acceptance or rejection of the null.
Be sure to respond to at least one of your classmates’ posts.
Click here to watch the video
Reply Quote
.
Please respond to the followingCharts and graphs are used.docxSONU61709
Please respond to the following:
Charts and graphs are used quite often in newspapers, magazines, books, and various online articles. There are pros and cons to using these types of visual representations.
Describe one pro and one con for using a graph or chart. Share an example of a time when this type of visual changed your mind about something or gave you a deeper understanding of a topic or current event.
.
Please respond to the followingAppraise the different approac.docxSONU61709
Please respond to the following:
Appraise the different approaches (e.g., biological, psychological, sociocultural, etc.) that may influence the myriad of methods by which adults construct learning. Suggest key instructional strategies that you might use that favor an integrated approach to teaching within a diverse learning context. Provide examples of such strategies in use in order to support your response.
.
Please respond to the following discussion with a well thought out r.docxSONU61709
Please respond to the following discussion with a well thought out response with relating to at least one source (cite using APA). Post your main post within midnight Thursday.
How could you use milestones and/or Earned Value Management as a measure of success in a project?
What limitation does just offering milestones provide as a means of project reporting?
Define some best practices with monitoring project quality.
Choose at least one quality tool and explain how it may be used in a project.
.
Please respond to each classmate if there is a need for it and als.docxSONU61709
Please respond to each classmate if there is a need for it and also any suggestion and comment that u may think are need it in order to correct the rough draft for the final use it
1)Hey---------, I like your introduction, your thesis is clear and it is in the last sentence of the intro. I think that the big theme of this story is to hold on to our traditional ancestral values, or at least respect these values because they are important and we clearly see it in the story. I would suggest to watch out for spelling errors and to work a little more on your conclusion, I would recommend giving more summary and more details in explaining your thesis.
2) hello -----,
I like your explination and view of this short story. Other then giving a little more detail from the story I think you did great. What made you choose this story to write about?
After reading you paper what made you choice this story? I like how you talk about the story and how you break everything down. I know you wanted to keep everything original I believe you could have adding just a little more to your paper. I can completely understand how writing papers can be hard keep up the amazing work.
3)Hi, -----------
I also had chosen the same story to write about. I thought you had done a good job. I know its hard to think of so many words, about the the same thing. But my understanding is we werent allowed to use out side sources. We were only allowed to use our book. May be I misunderstood, which is very possible. Did you agree with the villagers for destroying the school, because their path was blocked off?
Running head: FICTION ANALYSIS: DEAD MEN’S PATH 1
FICTION ANALYSIS: DEAD MEN’S PATH 4
Fiction Analysis:Dead Men's Path
Estrella Gonzalez
South University
ENG1300 SU01 Composition III/Literature
Joseph Walker
Fiction Analysis:Dead Men's Path Comment by Joseph: Start actual paper at the top of a new page.
Dead Men's Path by China Achebe delves into the implications of making choices. Achebe uses symbolism to bring home his views on the repercussions that choices people make can have on their lives. Achebe presents a society that is torn apart in two divides: between the tradition on one hand and modernity on the other hand. The society is not willing to welcome the new progressive thoughts that have been brought by the missionaries(Achebe, 2009). Through the use of symbolism, Achebe makes a cataclysmic flowing story that has much deeper imnsights than the superficial representations in words. What are some of the dangers of disregarding the opinions that is supported by majority in the society? Achebe’s Dead Men's Path answers this question using symbolic presentations. Comment by Joseph: Set off titles. Comment by Joseph: Be careful of the spelling of names. Comment by Joseph: You don’t need a citation for simple plot summary. Comment by J.
please respond to both discussion in your own words in citation plea.docxSONU61709
please respond to both discussion in your own words in citation please need it in your own words
1.The Florida bog frog could be a small and uncommon land and water proficient. This species features a yellowish-brown upper body, a yellow stomach, brown eardrum, yellow throat, a contract ridge that runs along the side down the back, and littler webbed feet with bigger toes . There's restricted data accessible approximately the reproduction of the Florida bog frog. Florida bog frogs breed between the months of April and August. Amid the breeding season, marsh frogs will let out boisterous “chucks” to pull in a mate.Florida bog frogs occupy numerous regions including shallow, acidic spring leaks; boggy floods of streams; .The most risk to the Florida marsh frog is the degradation of its habitat. Bog frogs flourish best in early succession vegetation.
2.The Florida mouse is a species of rodent in the family Cricetidae. It is the only species in the genus Podomys, which is the single mammal genus endemic to Florida. I like this mouse because it reminds me of Mickey Mouse created by Walt Disney, and redirect me to its amusement parks in Orlando, Florida. This mouse also caught my attention because it looks so funny and different from the rest of the mice. The Florida mouse is found only in a limited area in central peninsular Florida and one small area in the Florida panhandle. The mouse inhabits some of Florida's hottest and driest regions in the high pinelands, sandhills, flatlands, and coastal scrub. They average between 5 to 8 inches long, and their tails are between 2 to 3.5 inches long, weighing between 1/2 ounce to 1 ounce. The Florida mouse has soft silky fur that is brown or brownish-orange in color. Its underparts are white. Their ears are large and furless. Their tails are long, and their back paws are large and have 5 pads. Their teeth are sharp, and they use them for gnawing.
The Florida mouse is nocturnal and is active throughout the year except on unusually cold nights. The mouse can climb but is primarily a terrestrial species. They communicate by emitting high pitched squeals, and when they are excited, they thump the ground with their front paws producing a drumming sound. The Florida mouse also has a distinctive odor, almost like a skunk. A baby of a Florida mouse is called a pinkie, kitten, or pup. The females are called doe and males buck. A Florida mouse group is called a nest, colony, harvest, horde, or mischief.
The Florida mouse is an omnivore, and its diet consists of acorns when available, insects, seeds, nuts, fungi, crickets, ticks, fruit, berries, and other plant material and vertebrates. A 1987 report indicates the mouse feeds on engorged ticks (
Ornithodorus turicata americanus
) that parasitize gopher frogs (
Rana areolata
) and gopher tortoises.
According to the official State of Florida's Endangered and Threatened Species List of wildlife, the Florida mouse is considered as State Species of Special Conce.
please respond In your own words not citations1. The Miami blu.docxSONU61709
please respond In your own words not citations
1. The Miami blue butterfly may be a little butterfly .The Miami blue butterfly can be found in tropical pine rock-lands, and beach side in Florida. The Miami blue was thought extinct until it was rediscovered in 1999 . In spite of many changes the Bahia Honda populace held on until 2010, when it vanished, maybe due to a combination of dry spell, cold temperatures, and being eaten by non-native green iguanas. They was rediscovered in Key West National Natural life Asylum in 2006. The are one of Florida most endangered species. I love butterflies because they're colorful with wings of distinctive patterns. I love how they change from caterpillars to cocoons to butterflies. Its so relate able to life , always changing and evolving . Its astonishing that the butterfly emerges from the unpleasant small caterpillar and shapes a cocoon and after that rises as a butterfly
2.Six families of dragonflies exist in Florida with most found near ponds and other freshwater sources. Dragonflies feature large eyes that make up most of their head and a muscular body that helps the insects use their large wings to fly. Sometimes you'll see dragonflies hovering near blacktop parking lots, but for the most part, the insects stay near water except when they look for a mate. They then return to the water to breed and deposit eggs.
Adult dragonflies will eat any insect as long as they can catch it. Dragonfly nymphs live in the water, and they usually wait on aquatic vegetation.
From the nymph stage to the adult stage, the dragonfly has a significant, positive ecological impact. Dragonfly eggs are laid and hatched in or near water, so their lives impact both water and land ecosystems. Once hatched, dragonfly nymphs can breathe underwater, and they use a motion similar to jet propulsion to move through their environment. This enables them to eat harmful aquatic organisms such as mosquito larvae. The nymph will continue contributing to this ecosystem for one to five years before becoming a mature adult. The adult dragonfly has enormous compound eyes that are useful in searching for flying insects. While flying, it uses its six legs to scoop food out of the air. Clasping the prey in its front legs, it then eats the insect in flight.
Dragonflies play ecological roles not only as predators but also as prey of birds, frogs, and other creatures. The presence of dragonflies indicates freshwater. One of the most useful dragonfly facts is that they reside low in the food chain, so a scientific study of their numbers and their health can reveal changes in water ecosystems more quickly than studying other animals or plants. Some national parks are beginning to use this species to survey and document the health of the park's water ecosystems. Since dragonflies eat mosquitoes and other insects, they help gardeners and outdoor enthusiasts. This also helps the environment because it allows humans to reduce the u.
Please respond in 300 words the followingWe see SWOT present.docxSONU61709
Please respond in 300 words the following
We see SWOT presented in a 4 block matrix:
Internal: S/W
External: O/Th
Choose a department in a hospital, such as labor and delivery, and provide an analysis that involves both internal and external matrices.
Use an outside resource for your initial post. Seek information through healthcare news articles and journals. Write in third person and do not use “I think or in my opinion”. Keep your information factual and follow APA standards on referencing
.
Please respond to the followingReflect on the usefulness .docxSONU61709
A portfolio can be an effective way to provide evidence of accomplishments to pursue career goals by collecting examples of one's work, qualifications, and achievements in one place. It allows potential employers to easily see relevant skills and experience. According to Smith (2019), portfolios provide a comprehensive picture of a candidate that can strengthen their application.
Please respond to the followingLeadership talent is an or.docxSONU61709
Please respond to the following:
Leadership talent is an organization-wide goal. Discuss how the responsibilities of the development of leadership talent should be partitioned among Human Resources staff and line managers. Be sure to address both the identification and development of future leadership.
.
Please respond to the followingHealth care faces critic.docxSONU61709
Please respond to the following:
Health care faces critical staffing shortages. Imagine you are part of the executive management team researching health care shortages.
Outline some of the staffing shortages in the market where you live. Are they consistent with national trends?
Design a strategy that describes how your organization would alleviate some staffing shortages, including whether you would hire licensed practical nurses instead of registered nurses. Include concepts from readings throughout your program or from peer-reviewed journal articles.
.
Please respond to the followingMNCs, IOs, NGOs, and the E.docxSONU61709
Please respond to the following:
MNCs, IOs, NGOs, and the European Union are nonstate actors in the role of pushing foreign policy to combat terrorism. Discuss 1 or 2 ways in which the national strategy influences any of these nonstate actors.
Analyze the benefits or disadvantages for the United States with regard to the agency's position on foreign aid. Provide 1 or 2 examples to support your response.
.
How to Add Chatter in the odoo 17 ERP ModuleCeline George
In Odoo, the chatter is like a chat tool that helps you work together on records. You can leave notes and track things, making it easier to talk with your team and partners. Inside chatter, all communication history, activity, and changes will be displayed.
How to Fix the Import Error in the Odoo 17Celine George
An import error occurs when a program fails to import a module or library, disrupting its execution. In languages like Python, this issue arises when the specified module cannot be found or accessed, hindering the program's functionality. Resolving import errors is crucial for maintaining smooth software operation and uninterrupted development processes.
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...PECB
Denis is a dynamic and results-driven Chief Information Officer (CIO) with a distinguished career spanning information systems analysis and technical project management. With a proven track record of spearheading the design and delivery of cutting-edge Information Management solutions, he has consistently elevated business operations, streamlined reporting functions, and maximized process efficiency.
Certified as an ISO/IEC 27001: Information Security Management Systems (ISMS) Lead Implementer, Data Protection Officer, and Cyber Risks Analyst, Denis brings a heightened focus on data security, privacy, and cyber resilience to every endeavor.
His expertise extends across a diverse spectrum of reporting, database, and web development applications, underpinned by an exceptional grasp of data storage and virtualization technologies. His proficiency in application testing, database administration, and data cleansing ensures seamless execution of complex projects.
What sets Denis apart is his comprehensive understanding of Business and Systems Analysis technologies, honed through involvement in all phases of the Software Development Lifecycle (SDLC). From meticulous requirements gathering to precise analysis, innovative design, rigorous development, thorough testing, and successful implementation, he has consistently delivered exceptional results.
Throughout his career, he has taken on multifaceted roles, from leading technical project management teams to owning solutions that drive operational excellence. His conscientious and proactive approach is unwavering, whether he is working independently or collaboratively within a team. His ability to connect with colleagues on a personal level underscores his commitment to fostering a harmonious and productive workplace environment.
Date: May 29, 2024
Tags: Information Security, ISO/IEC 27001, ISO/IEC 42001, Artificial Intelligence, GDPR
-------------------------------------------------------------------------------
Find out more about ISO training and certification services
Training: ISO/IEC 27001 Information Security Management System - EN | PECB
ISO/IEC 42001 Artificial Intelligence Management System - EN | PECB
General Data Protection Regulation (GDPR) - Training Courses - EN | PECB
Webinars: https://pecb.com/webinars
Article: https://pecb.com/article
-------------------------------------------------------------------------------
For more information about PECB:
Website: https://pecb.com/
LinkedIn: https://www.linkedin.com/company/pecb/
Facebook: https://www.facebook.com/PECBInternational/
Slideshare: http://www.slideshare.net/PECBCERTIFICATION
Exploiting Artificial Intelligence for Empowering Researchers and Faculty, In...Dr. Vinod Kumar Kanvaria
Exploiting Artificial Intelligence for Empowering Researchers and Faculty,
International FDP on Fundamentals of Research in Social Sciences
at Integral University, Lucknow, 06.06.2024
By Dr. Vinod Kumar Kanvaria
Chapter wise All Notes of First year Basic Civil Engineering.pptxDenish Jangid
Chapter wise All Notes of First year Basic Civil Engineering
Syllabus
Chapter-1
Introduction to objective, scope and outcome the subject
Chapter 2
Introduction: Scope and Specialization of Civil Engineering, Role of civil Engineer in Society, Impact of infrastructural development on economy of country.
Chapter 3
Surveying: Object Principles & Types of Surveying; Site Plans, Plans & Maps; Scales & Unit of different Measurements.
Linear Measurements: Instruments used. Linear Measurement by Tape, Ranging out Survey Lines and overcoming Obstructions; Measurements on sloping ground; Tape corrections, conventional symbols. Angular Measurements: Instruments used; Introduction to Compass Surveying, Bearings and Longitude & Latitude of a Line, Introduction to total station.
Levelling: Instrument used Object of levelling, Methods of levelling in brief, and Contour maps.
Chapter 4
Buildings: Selection of site for Buildings, Layout of Building Plan, Types of buildings, Plinth area, carpet area, floor space index, Introduction to building byelaws, concept of sun light & ventilation. Components of Buildings & their functions, Basic concept of R.C.C., Introduction to types of foundation
Chapter 5
Transportation: Introduction to Transportation Engineering; Traffic and Road Safety: Types and Characteristics of Various Modes of Transportation; Various Road Traffic Signs, Causes of Accidents and Road Safety Measures.
Chapter 6
Environmental Engineering: Environmental Pollution, Environmental Acts and Regulations, Functional Concepts of Ecology, Basics of Species, Biodiversity, Ecosystem, Hydrological Cycle; Chemical Cycles: Carbon, Nitrogen & Phosphorus; Energy Flow in Ecosystems.
Water Pollution: Water Quality standards, Introduction to Treatment & Disposal of Waste Water. Reuse and Saving of Water, Rain Water Harvesting. Solid Waste Management: Classification of Solid Waste, Collection, Transportation and Disposal of Solid. Recycling of Solid Waste: Energy Recovery, Sanitary Landfill, On-Site Sanitation. Air & Noise Pollution: Primary and Secondary air pollutants, Harmful effects of Air Pollution, Control of Air Pollution. . Noise Pollution Harmful Effects of noise pollution, control of noise pollution, Global warming & Climate Change, Ozone depletion, Greenhouse effect
Text Books:
1. Palancharmy, Basic Civil Engineering, McGraw Hill publishers.
2. Satheesh Gopi, Basic Civil Engineering, Pearson Publishers.
3. Ketki Rangwala Dalal, Essentials of Civil Engineering, Charotar Publishing House.
4. BCP, Surveying volume 1
it describes the bony anatomy including the femoral head , acetabulum, labrum . also discusses the capsule , ligaments . muscle that act on the hip joint and the range of motion are outlined. factors affecting hip joint stability and weight transmission through the joint are summarized.
Main Java[All of the Base Concepts}.docxadhitya5119
This is part 1 of my Java Learning Journey. This Contains Custom methods, classes, constructors, packages, multithreading , try- catch block, finally block and more.
Walmart Business+ and Spark Good for Nonprofits.pdfTechSoup
"Learn about all the ways Walmart supports nonprofit organizations.
You will hear from Liz Willett, the Head of Nonprofits, and hear about what Walmart is doing to help nonprofits, including Walmart Business and Spark Good. Walmart Business+ is a new offer for nonprofits that offers discounts and also streamlines nonprofits order and expense tracking, saving time and money.
The webinar may also give some examples on how nonprofits can best leverage Walmart Business+.
The event will cover the following::
Walmart Business + (https://business.walmart.com/plus) is a new shopping experience for nonprofits, schools, and local business customers that connects an exclusive online shopping experience to stores. Benefits include free delivery and shipping, a 'Spend Analytics” feature, special discounts, deals and tax-exempt shopping.
Special TechSoup offer for a free 180 days membership, and up to $150 in discounts on eligible orders.
Spark Good (walmart.com/sparkgood) is a charitable platform that enables nonprofits to receive donations directly from customers and associates.
Answers about how you can do more with Walmart!"
A review of the growth of the Israel Genealogy Research Association Database Collection for the last 12 months. Our collection is now passed the 3 million mark and still growing. See which archives have contributed the most. See the different types of records we have, and which years have had records added. You can also see what we have for the future.
Reimagining Your Library Space: How to Increase the Vibes in Your Library No ...Diana Rendina
Librarians are leading the way in creating future-ready citizens – now we need to update our spaces to match. In this session, attendees will get inspiration for transforming their library spaces. You’ll learn how to survey students and patrons, create a focus group, and use design thinking to brainstorm ideas for your space. We’ll discuss budget friendly ways to change your space as well as how to find funding. No matter where you’re at, you’ll find ideas for reimagining your space in this session.
LAND USE LAND COVER AND NDVI OF MIRZAPUR DISTRICT, UPRAHUL
This Dissertation explores the particular circumstances of Mirzapur, a region located in the
core of India. Mirzapur, with its varied terrains and abundant biodiversity, offers an optimal
environment for investigating the changes in vegetation cover dynamics. Our study utilizes
advanced technologies such as GIS (Geographic Information Systems) and Remote sensing to
analyze the transformations that have taken place over the course of a decade.
The complex relationship between human activities and the environment has been the focus
of extensive research and worry. As the global community grapples with swift urbanization,
population expansion, and economic progress, the effects on natural ecosystems are becoming
more evident. A crucial element of this impact is the alteration of vegetation cover, which plays a
significant role in maintaining the ecological equilibrium of our planet.Land serves as the foundation for all human activities and provides the necessary materials for
these activities. As the most crucial natural resource, its utilization by humans results in different
'Land uses,' which are determined by both human activities and the physical characteristics of the
land.
The utilization of land is impacted by human needs and environmental factors. In countries
like India, rapid population growth and the emphasis on extensive resource exploitation can lead
to significant land degradation, adversely affecting the region's land cover.
Therefore, human intervention has significantly influenced land use patterns over many
centuries, evolving its structure over time and space. In the present era, these changes have
accelerated due to factors such as agriculture and urbanization. Information regarding land use and
cover is essential for various planning and management tasks related to the Earth's surface,
providing crucial environmental data for scientific, resource management, policy purposes, and
diverse human activities.
Accurate understanding of land use and cover is imperative for the development planning
of any area. Consequently, a wide range of professionals, including earth system scientists, land
and water managers, and urban planners, are interested in obtaining data on land use and cover
changes, conversion trends, and other related patterns. The spatial dimensions of land use and
cover support policymakers and scientists in making well-informed decisions, as alterations in
these patterns indicate shifts in economic and social conditions. Monitoring such changes with the
help of Advanced technologies like Remote Sensing and Geographic Information Systems is
crucial for coordinated efforts across different administrative levels. Advanced technologies like
Remote Sensing and Geographic Information Systems
9
Changes in vegetation cover refer to variations in the distribution, composition, and overall
structure of plant communities across different temporal and spatial scales. These changes can
occur natural.
LAND USE LAND COVER AND NDVI OF MIRZAPUR DISTRICT, UP
1. How do domestic considerations make foreign and security polici.docx
1. 1. How do domestic considerations make foreign and security
policies different than they would be on the basis of
international and strategic considerations alone?
2. How have technological innovations affected the evolution of
U.S. security policy since the end of World War II? To what
extent can it be said that technology determines strategy?
3. In your view, why did President Eisenhower adopt first a
policy of massive retaliation and later Mutually Assured
Destruction (MAD)? What were his reasons, was he justified,
and how has history judged him?
4. Which model (from Essence of Decision) best explains the
US response to the Soviets placing missiles in Cuba? Justify
your selection.
5. What is more important in determining presidential success
in foreign policy, the way the NSC is organized or presidential
management style?
6. How have the 9/11 terrorist attacks on U.S. soil affected
presidential power in national security affairs – and is this a
positive or negative development and why?
7. Is it possible to move some of the growing interagency
coordination burden outside of the presidency? How? What
would the president gain or lose as a result?
8. Who were the key interagency players in President Bush’s
decision to invade Iraq in 2003? What other players should have
had greater input and why were they marginalized?
9. In your view, what defines (list three characteristics) the U.S.
Strategic Culture and how has it influence/shaped recent U.S.
Foreign or National Security Policies? Provide at least one
example in your response.
10. How does the “Surge” of U.S. forces in Afghanistan support
the US Strategy for that country and the region? In your view is
it working or do the Ends-Ways-Means and risk need to be
reassessed – if so how, if not why not?
2. 11. When the U.S. decides to use military force, how important
are national and international perceptions of U.S. legitimacy
and moral authority?
12. What is counter-proliferation? What is nonproliferation?
What are the similarities and the differences between the two
policies?
13. What are the three primary threats that the Department of
Homeland Security is responsible for? Rank order the threats in
terms of importance and list which of DHS’s subordinate
agencies has the lead and which other agencies are in principle
support? In your response justify your ranking of the threats and
if you feel another agency should have the lead state which one
and why.
14. Name three things you feel the Department of Homeland
Security could have done to mitigate the disruption and
suffering caused by Hurricane Katrina.
15. Why can it be argued that modern industrial warfare
(Interstate or State Centric warfare) may have ended with the
Cold War? Do you agree or disagree with this position and if
true what implications does it have for national security policy?
16. What are important international and domestic constraints
on the use of force in the current era? Under what conditions
would you expect these constraints to be more or less powerful?
Kennedy School of Government
Case Program C15-02-1651.0
HKS075
This case was written by Susan Rosegrant for Robert Z.
Lawrence, Albert L. Williams Professor of International
4. members of Congress, and most US steelmakers, unfairly priced
foreign imports had caused the
alarming declines. To restore the industry’s profitability, steel
representatives repeatedly called for
the Clinton administration to seek a trade ruling—known as a
Section 201 action— that, if
successful, would allow the president to impose a steel quota or
other form of far-reaching relief.
But a range of critics claimed such a measure would be
misplaced and would provide
unjustified relief. Foreign steelmakers insisted US firms were
struggling because of increasing
domestic competition and a lack of consolidation at home; many
steel analysts said falling steel
profits were the inevitable result of excess capacity worldwide,
including in the US; and a number
of US steel consumers and economists argued that cheap foreign
steel was actually good for the
country, and that quotas would inevitably spur trade retaliation.
If the government imposed a steel
quota, many observers agreed, it would unnecessarily harm
foreign countries dependent on steel
exports, and would benefit one narrow product sector at the
expense of the broader US economy.
The Clinton administration ultimately left office without
bringing a Section 201 case. But as
the health of the domestic steel industry continued to deteriorate
in 2001, the Bush administration
For the exclusive use of Y. Gao, 2017.
This document is authorized for use only by Yuanyuan Gao in
Industrial Organization II: Spring 2017 taught by Erich
Muehlegger, University of California - Davis from April 2017
5. to June 2017.
Standing up for Steel
_____________________________________________________
____ C15-02-1651.0
2
faced increasingly urgent pleas to open a comprehensive 201
trade investigation. Whatever Bush
decided would likely have far-reaching consequences for the
domestic steel industry, the US
economy, and the nation’s relationships with its foreign trading
partners.
A History of Trade Remedies
The steel industry’s quest for trade relief was not new. For
much of the 20th century, the US
steel industry had served as the nation’s industrial backbone,
providing jobs for generations of
workers, and in the process becoming a potent symbol of the
country’s industrial might. But since
the 1960s, when foreign steel first entered the US market in
significant quantities, domestic
companies and steelworkers had complained of unfairly priced
imports and an uneven playing
field.
While market conditions had changed over the years, and the
number of steel-producing
countries had grown, many of the fundamental issues remained
the same. According to US
industry, domestic companies couldn’t compete effectively
6. against most imported steel because of
pervasive market-distorting practices overseas. These practices
included closed markets that
permitted few imports, such as Japan’s protected domestic
market; non-market economies under
which steel enterprises were state-owned and supported, such as
in the former Soviet Union; and
reliance on government subsidies, such as the assumption of
pension costs by European
governments to aid restructuring during the 1980s and 1990s. In
addition, US steelmakers said,
production costs in the US were generally higher due to more
stringent labor and environmental
controls.
Because foreign steelmakers enjoyed such home market
advantages, US companies
claimed, they often could afford to sell steel in the US at prices
well below what US steelmakers
needed to charge to remain profitable. Domestic steelmakers
didn’t compete directly with imports
for all their business. Large steel consumers, such as the major
auto manufacturers, for example,
met most of their steel needs through contracts with US
companies. By contrast, most foreign steel
was imported by metal trading companies or steel service
centers that sold the steel on the so-
called “commodity grade” spot market. But even the large
contract sales were affected when cheap
imports forced down overall prices, industry representatives
said.
In order to protect profitability and market share, the US steel
industry and its workers
had repeatedly appealed to the government for protection from
foreign imports, claiming that
7. without relief the domestic industry would be unable to
compete. Government had been unusually
responsive, due in large part to the clout of the United
Steelworkers of America union and the
strength of the Congressional Steel Caucus, a powerful
bipartisan group of lawmakers who
represented districts and states with steel manufacturers.
For the exclusive use of Y. Gao, 2017.
This document is authorized for use only by Yuanyuan Gao in
Industrial Organization II: Spring 2017 taught by Erich
Muehlegger, University of California - Davis from April 2017
to June 2017.
Standing up for Steel
_____________________________________________________
____ C15-02-1651.0
3
Four administrations in a row imposed import restraints,
beginning with President
Richard Nixon, who in 1969 established quota-like voluntary
restraint agreements lasting five years
that affected steel from Japan and Europe. In the late 1970s, the
Carter administration devised a
“trigger price mechanism,” which allowed a certain amount of
steel imports into the country if
sold at or above a set trigger price. After that expired, President
Reagan negotiated a new round of
voluntary restraint agreements, later renewed by President
George Bush, that apportioned shares
of a limited import pool among foreign steel-producing
8. countries. Many critics pointed to this
series of import restraints as evidence of undue government
protectionism. “Beginning with
import quotas in 1969, protection has been the rule rather than
the exception for the steel industry,”
according to Daniel Griswold, associate director of the Cato
Institute’s Center for Trade Policy
Studies.1
By the time Bill Clinton assumed the presidency in 1993, the
voluntary restraint
agreements of the Reagan and Bush era had expired. Domestic
steelmakers, however, continued to
make aggressive use of the US trade laws at their disposal.
Antidumping and Countervailing Duty Laws
The antidumping and countervailing duty laws dealt specifically
with unfair trade. Most
frequently brought were antidumping cases, often referred to
simply as dumping cases. If a union
or group of domestic steel companies believed that a steel
product was being imported at an unfair
price, or “dumped,” it could request that the US Commerce
Department initiate an investigation.2
If Commerce concluded that unfair pricing had occurred, by
finding that the import price was
lower than the home market price or than the cost of production,
it then determined the margin of
dumping.3 Finally, the petitioners went before the International
Trade Commission (ITC), an
independent, quasi-judicial federal agency, to try to prove that
the dumping had caused injury or
threat of injury to the industry.4
9. Countervailing duty cases also involved unfair trade, but were
brought when domestic
companies believed a government subsidy in a foreign country
was giving an industry in that
country an unfair advantage. Unfair government subsidies could
include the granting of interest-
If the ITC reached a positive finding, the importer had to pay
duties equal to the dumping margin. While it could take 12 to
18 months for a final ruling,
importers had to post a bond to cover estimated duties as soon
as a preliminary positive finding
had been reached, a process typically completed within about
six months.
1
Daniel Griswold, “Counting the Cost of Steel Protection,”
Hearing on steel trade issues before the House
Committee on Ways and Means Subcommittee on Trade,
February 25, 1999.
2
The Treasury Department had originally overseen dumping
cases, but Commerce assumed responsibility in 1979, a
move that most observers agreed had contributed to the process
becoming more industry-responsive.
3
If using the home market price as the basis of comparison, for
example, the dumping margin would be the
difference between that price and the US import price.
4
ITC regulations required that no more than three of the six
commissioners be of the same political party. In
10. practice, this usually resulted in a commission split between
Democrats and Republicans.
For the exclusive use of Y. Gao, 2017.
This document is authorized for use only by Yuanyuan Gao in
Industrial Organization II: Spring 2017 taught by Erich
Muehlegger, University of California - Davis from April 2017
to June 2017.
Standing up for Steel
_____________________________________________________
____ C15-02-1651.0
4
free loans and the assumption of pension and health care costs.
If the ITC found injury, Commerce
would have the US Customs Service impose a “countervailing”
or offsetting duty on the imports
equal to the estimated subsidy.
Section 201 of the Trade Act of 1974
Unlike antidumping and countervailing duty investigations, a
Section 201 case did not rely
on proof of unfair trade practices. Rather, if the ITC determined
that the volume of a particular
import constituted a substantial cause or threat of serious injury
to a domestic industry, the
president could impose temporary import relief without
violating the rules of the World Trade
Organization (WTO). Once initiated, usually by industry, the
11. case went straight to the ITC, which
ruled on the case and, if positive, made a recommendation to the
president, all within six months.
The president then had 60 days to come up with a remedy,
which could be no action at all; a tariff;
a quota; a tariff-rate quota; or some form of trade adjustment
assistance.
Section 201 had the potential to provide a more comprehensive
remedy than dumping
investigations. In the case of steel, for example, a 201
investigation could target all steel imports
from all countries, while a dumping or countervailing duty
investigation dealt only with one
product and one country at a time, such as hot-rolled steel from
Japan. But in part because the
injury standard was higher for a 201 than for a dumping or
countervailing duty case, and thus
harder to prove, and in part because the outcome was entirely at
the president’s discretion, 201
cases were far less common.
Critics of the dumping laws insisted that they were too plaintiff-
friendly. Indeed, from
1980 to 1997, 80 percent of all dumping cases brought in the
US—including steel actions—were
successful. According to William Barringer, a partner at Willkie
Farr & Gallagher who represented
Japanese and Brazilian steelmakers, foreign countries often
didn’t even bother to respond to
dumping cases, believing that their chances of prevailing were
so slim. Industry representatives in
the US, however, maintained that the dumping laws were a
completely legitimate and necessary
tool to combat surges of unfairly priced imported steel. The
number of successful cases, they
12. contended, merely demonstrated the prevalence of dumping and
subsidization.
In either case, many economists noted that all steelmakers
periodically engaged in
dumping because in a cyclical and capital intensive industry it
was more profitable to sell below
cost during a downturn than not to sell at all, as long as
revenues covered variable costs. While it
was legal to sell below cost in a home market, something US
firms did regularly, to do so overseas
was dumping.5
5
US steelmakers exported very little steel.
“This is completely economically rational behavior in a period
of excess capacity,”
says one economist, “but it runs afoul of the dumping laws.”
Because selling below cost was so
common in the industry, and because the domestic industry was
aggressive in seeking protection,
For the exclusive use of Y. Gao, 2017.
This document is authorized for use only by Yuanyuan Gao in
Industrial Organization II: Spring 2017 taught by Erich
Muehlegger, University of California - Davis from April 2017
to June 2017.
Standing up for Steel
_____________________________________________________
____ C15-02-1651.0
13. 5
steel companies historically had used the dumping law more
than any other industry, and were
responsible for about a third of all cases brought between 1980
and 1995.
History of Restructuring
Although the US steel industry continued to seek relief from
what it deemed unfair
imports, foreign steelmakers and some other industry observers
argued that most of the steel
industry’s problems were the result of internal decisions and
conditions at home. US steel
companies—loath to make the huge capital investments
required—had taken longer than many of
their foreign competitors to upgrade their outdated open-hearth
blast furnace technology to more
cost-efficient basic oxygen furnaces, critics said. Not until the
1980s did serious industry
reinvestment begin, and the last open hearth furnace in the US
didn’t close until 1991.
The older integrated steel mills—so called because of the
vertically integrated process they
used to turn raw inputs such as iron ore into finished carbon
flat-rolled steel products—also faced
growing competition domestically from mini-mills, many of
which began operating in the 1970s.
These faster and more flexible companies typically had far
lower costs than the integrateds: They
produced finished steel from abundant scrap metal melted in
highly efficient electric-arc furnaces;
their workforces were often non-union; and because they were
14. young, they did not have to pay
benefits to large numbers of retired workers. Although the steel
produced by the early mini-mills
was mostly low grade, the product improved with the
technology. By 1998, the mini-mills were
competing directly against the integrateds in certain product
areas, and their share of US
production had increased to almost 40 percent.
Some critics also claimed that US companies had not done
enough to consolidate,
particularly compared to European and Latin American firms.
According to foreign steel attorney
William Barringer, efforts by the United Steelworkers of
America union to keep all plants in
operation—regardless of their performance—had constrained
restructuring and resuscitated entire
companies that should have been allowed to fail. By 1997,
Barringer says, the industry could be
broken into three distinct segments: the large integrated
steelmakers, like AK Steel, Bethlehem
Steel, and U.S. Steel, most or all of whose operations were cost
competitive; globally competitive
mini-mills, like Nucor and Steel Dynamics; and the second-tier
integrated mills, such as Weirton,
Wheeling-Pittsburgh, and Geneva Steel, which, he claims, were
“on the verge of bankruptcy, have
been on the verge of bankruptcy, and will continue to be on the
verge of bankruptcy.”
Consolidation efforts were hampered as well by the so-called
legacy costs borne by the
older integrated firms. In the 1970s, even as industry and union
representatives decried the market
incursions of steel from abroad, and appealed to government to
protect the domestic industry,
15. wages for steelworkers grew more rapidly than wages in any
other industrial sector—increasing
not only current worker benefits, but also the benefits that
would be paid out as workers retired or
were laid off during subsequent plant closures. Such generous
wage policies, negotiated during a
For the exclusive use of Y. Gao, 2017.
This document is authorized for use only by Yuanyuan Gao in
Industrial Organization II: Spring 2017 taught by Erich
Muehlegger, University of California - Davis from April 2017
to June 2017.
Standing up for Steel
_____________________________________________________
____ C15-02-1651.0
6
period of industry decline, had contributed by the 1990s to
soaring legacy costs in the form of
pension, health, and severance benefits that drove down
company profits, raised the cost of
restructuring, and made steel companies unattractive as
potential acquisitions.
US industry and union representatives, however, presented a
very different picture. A
two-decade period of comprehensive restructuring, they
insisted, had by 1997 created a world-
class industry characterized by quality, efficiency, and
productivity. Dozens of inefficient mills
closed, and employment fell from more than 547,000 workers in
16. 1980 to about 236,000 in 1997, a
more than 50 percent drop in the labor force. In fact, the very
real burden of legacy costs, US
steelmakers argued, was painful proof of the industry’s
aggressive consolidation. Over the same
period, domestic steelmakers—with the federal government’s
encouragement—invested more than
$50 billion in updated facilities and equipment, including more
than $7 billion in environmental
controls. Productivity increased at twice the average rate of all
US manufacturing, helped by the
more productive mini-mills, and, at less than four man-hours
per ton of steel, was among the
highest in the world.
However, even some analysts who conceded that US
steelmakers had made great strides
over the last two decades questioned whether government
policies supporting widespread
reinvestment had been wise. The reason steelmakers were
struggling both in the US and abroad,
they argued, was the combination of global overcapacity with
quickly rising worldwide
productivity and relatively sluggish growth in demand. Despite
the domestic plant closings and
layoffs, total shipments of steel products in the US had risen
from about 84 million tons in 1980 to
about 105 million tons in 1997. Thus, as more developing
nations became steel producers and
countries such as the US increased production, excess global
capacity, which in the last few
decades had often topped 20 percent of production, would only
get worse. “Why would we try to
force an industry that is in decline and supposed to be reducing
its capacity to actually take money
and invest it in the steel industry?” asks one former government
17. official.
In addition, some industry observers questioned whether the US
government should
protect the domestic steel industry at all. Cheap foreign
imports, after all, lowered the cost of steel
for downstream users, who by the 1990s far exceeded steel
producers in employment and
capitalization. Moreover, given the growing strength of the
mini-mills and the number of new
steel-producing entrants worldwide, the risk of a single foreign
country or company driving all US
firms out of business, taking control of the steel market, and
then raising prices was moot. “If the
United States adjusted out of steel and we ended up producing
only 20 percent of our steel needs,
would we be in deep trouble, and unable to have our
manufacturing sector produce the kind of
machinery we need?” asks one economist. “The answer is no.”
But most Americans still believed in the importance of a vital
US steel industry. While
steel-consuming businesses wanted access to imports, they also
wanted a reliable and accessible
domestic supply. In addition, despite deep layoffs and numerous
plant closings, steel was still a
For the exclusive use of Y. Gao, 2017.
This document is authorized for use only by Yuanyuan Gao in
Industrial Organization II: Spring 2017 taught by Erich
Muehlegger, University of California - Davis from April 2017
to June 2017.
18. Standing up for Steel
_____________________________________________________
____ C15-02-1651.0
7
highly visible industry, and regional pockets around the country
depended on steel mills to keep
their economies afloat. Finally, even some economists who
considered themselves supporters of
free trade argued that simply allowing market forces to work
wasn’t fair in a global industry so
skewed by foreign subsidies. “It has been distorted by so much
government intervention on so
many different levels for so long,” says Greg Mastel, trade
counsel and chief economist for the
Senate Finance Committee, “that it’s a marketplace where it is
hard to say, ‘Just let the market
operate.’”
The 1998 Steel Crisis
Despite ongoing restructuring, the 1990s were a period of
recovery for much of the US
steel industry. The nation’s strong economy created a ready
market for steel, as domestic demand
increased by about seven percent a year. While steel imports
accounted for 20 percent of the US
market in 1997, much of that was needed, since domestic
demand exceeded what US companies
could supply by more than 15 percent. Moreover, about a
quarter of the imports were semifinished
steel brought in by the domestic steel industry itself for further
finishing. US steel shipments were
at a record level, and domestic steel mill capacity utilization—a
key measure of industry health—
19. was above 90 percent.
By the fall of 1997, however, George Becker, president of the
United Steelworkers of
America, was becoming uneasy about how the domestic industry
would be affected by the
growing financial crisis in Asia. Demand for steel in Asia had
collapsed, making the US market
more than usually attractive, and regional currency devaluations
in steel-making countries like
South Korea and Japan were resulting in even cheaper foreign
steel. Becker met with the Clinton
administration to voice his concerns, but the data did not yet
support his contention that rising
imports and falling prices might spiral out of control. After all,
the steel industry’s 1997 financial
results were the best in more than 15 years.
By the summer of 1998, though, the Asian crisis, coupled with
an economic collapse in
Russia, began to have a serious impact on the global steel
market. As a backlog of steel
accumulated, much of which would formerly have gone to Asia,
prices fell worldwide and a huge
volume of low-priced steel—in particular, hot-rolled steel from
Japan, Russia, Korea, and Brazil—
poured into the US market.6
6
US imports of Japanese hot-rolled steel for the year would
eventually show a 381 percent increase over 1997.
Imports in a few categories rose to nearly 40 percent of the US
market,
about double what they had been the year before. Despite a
20. booming domestic economy, US
steelmakers faced the choice of following prices down or giving
up market share. Even Nucor, the
mini-mill whose low-cost production had helped make it the
nation’s second largest steelmaker,
wrote to Commerce Secretary William Daley in August to warn
that unfairly priced imports were
taking a dangerous bite out of the US industry’s profitability.
“When Nucor came and said it was
hurting,” one former official says, “that got the attention of
people in the administration.”
For the exclusive use of Y. Gao, 2017.
This document is authorized for use only by Yuanyuan Gao in
Industrial Organization II: Spring 2017 taught by Erich
Muehlegger, University of California - Davis from April 2017
to June 2017.
Standing up for Steel
_____________________________________________________
____ C15-02-1651.0
8
To combat the sudden surge of imports, the United Steelworkers
of America union began
to work several fronts simultaneously. In September, it
launched “Stand Up for Steel,” a $4 million
advertising and public relations campaign designed to implicate
steel imports, and to exert
pressure on political representatives. “In this great economy
when everybody else was doing well,
we had to penetrate and push through with the message that
21. there was a major American industry
and a lot of employees that weren’t sharing in the good
fortune,” says William Klinefelter,
legislative and political director for the United Steelworkers of
America. “We had to say that we
were under attack. We had to get that message home.”
That same month, the Steelworkers Union began bombarding
Congress and the Clinton
administration with requests for legislative and executive
action.7 According to Klinefelter, the
union was convinced that only a comprehensive solution could
provide the quick and far-reaching
action that the steel industry needed to avoid plant closures and
job losses. While a legislative
quota limiting imports was its clear first choice, the union also
considered the likely effectiveness
of a Section 201 trade case. “I think we all realized that the
dumping cases were not going to be
enough, that we had to shut off more products from every
place,” Klinefelter explains. “So that’s
when the idea of the 201 case came up amongst us.” In
particular, the union wanted the Clinton
administration to self-initiate a 201 case. If the administration
brought the case, union officials
reasoned, the president would be more likely to grant
significant relief should it succeed.8
The US steel industry, however, disagreed with the union
position on quotas and 201.
9
Industry didn’t speak out against the union’s efforts, since it
didn’t want to sour relations
22. with the union, but it also didn’t directly support them. For its
part, a dozen steel companies filed
dumping cases September 30 on hot-rolled steel against Japan,
Russia, and Brazil, as well as a
countervailing duty case against Brazil. The union, which was
also hedging its bets, joined in the
filing.
Since the Reagan and Bush-imposed voluntary restraint
agreements ended in the early 1990s,
dumping cases had become the main remedy for industry.
Section 201 cases, while more
comprehensive than dumping cases, carried a number of risks,
steel representatives say. They were
difficult to bring; the injury standard was high; and relief was at
the discretion of the president,
who was often constrained by foreign policy considerations. “In
the last 20 years, no major
industry had gotten relief under 201,” says Alan Wolff, a
partner at Dewey Ballantine who
represented a group of major US integrated steel firms.
7
Although the crisis had become apparent the previous month,
Klinefelter says, the union delayed the letter-writing
campaign because “nothing happens in Washington in August.”
8
Although it was most common for industries to request a 201
investigation, unions, the president, the United States
Trade Representative, the House Committee on Ways and
Means, and the Senate Finance Committee were all
authorized to initiate.
23. 9
According to William Barringer, the second-tier firms were the
only ones pushing for 201 along with the unions
because they were desperate for any form of comprehensive
relief. “At the end of the day, what they were really
looking for was a political solution—a bailout,” Barringer says.
For the exclusive use of Y. Gao, 2017.
This document is authorized for use only by Yuanyuan Gao in
Industrial Organization II: Spring 2017 taught by Erich
Muehlegger, University of California - Davis from April 2017
to June 2017.
Standing up for Steel
_____________________________________________________
____ C15-02-1651.0
9
Becker and Klinefelter met with leading members of the
Congressional Steel Caucus
through the fall. Although the steel crisis hit late in the year for
Congress to react, the House,
among other legislation, approved a non-binding resolution
calling for a one-year ban on unfair
steel imports from ten countries, including Japan, Russia, and
Brazil. In addition, Senators John
Rockefeller (D-WV) and Arlen Specter (R-PA) introduced a bill
that would make it easier to bring a
Section 201 case. “What I was trying to tell the administration
with these resolutions,” says
24. Klinefelter, “was that if you don’t do something, don’t think
that Congress won’t act, because the
Congress will act.”
The administration had its own reasons to respond. “There is a
lot of merit to the argument
that foreigners have subsidized their steel industries,” says one
former Clinton official. “While
there is a huge amount of latent political support for free trade,
the Republicans and the Democrats
also compete in being tough against unfair trade.”
The Early Clinton Administration Response
During the fall, as the steel crisis worsened, the Clinton
administration tried to reduce the
onslaught of imports without resorting to market-closing
measures. US Trade Representative
(USTR) Charlene Barshefsky in October urged the European
Union (EU) to accept more Russian
steel, and pressured Japan, which was responsible for almost
half of the import surge, to begin
cutting its steel exports.10
In addition, Commerce streamlined its dumping investigations
and instituted a new
“critical circumstances” policy that allowed it to impose duties
retroactively on whatever
preliminary margins were eventually determined, rather than
waiting until the margins had been
assessed for duties to take effect. On November 23, after the
ITC found injury in the dumping cases
filed against Japan, Russia, and Brazil, Commerce announced it
would apply retroactive duties to
affected imports that had entered the US beginning November
12.
25. 11
But such actions didn’t comprise a policy. Since August there
had been frequent
interagency meetings of top officials involved in the steel issue
to discuss what to do. In particular,
administration representatives debated the wisdom of bringing a
201 case, the only comprehensive
import remedy the administration could impose that was WTO-
compatible. Principals’ meetings—
chaired by National Economic Council head Gene Sperling, who
coordinated steel trade policy—
consisted of Cabinet-level officials such as Treasury Secretary
Robert Rubin; Commerce Secretary
William Daley; USTR Charlene Barshefsky; Chairman of the
Council of Economic Advisers Janet
The threat of dumping duties
helped drive December steel imports down by one-third from
the previous month.
10
Although the EU talks were largely fruitless, imports of
Japanese steel fell by almost 50 percent in December in
response to the dumping case and administration negotiations.
11
This policy helped stop importers from rushing in products
targeted by a dumping action before duties had been
assessed and imposed.
26. For the exclusive use of Y. Gao, 2017.
This document is authorized for use only by Yuanyuan Gao in
Industrial Organization II: Spring 2017 taught by Erich
Muehlegger, University of California - Davis from April 2017
to June 2017.
Standing up for Steel
_____________________________________________________
____ C15-02-1651.0
10
Yellen; and White House Chief of Staff Erskine Bowles, usually
accompanied by their deputies. But
much of the real work occurred in the deputies meetings,
chaired by Deputy Assistant to the
President for International Economics Lael Brainard. These
sessions normally included Deputy
Secretary Lawrence Summers; Under Secretary of Commerce
for International Trade David Aaron,
backed up by Assistant Secretary for Import Administration
Robert LaRussa; USTR General
Counsel Susan Esserman; State Department Assistant Secretary
Alan Larson; Deputy National
Security Adviser James Steinberg; and Council of Economic
Advisers (CEA) member Robert
Lawrence.
According to inside observers, the policy positions of agencies
and individuals were
largely predictable. Officials at the Commerce Department and
USTR, who were meeting regularly
with industry lawyers and officials, wanted to pursue all legal
27. mechanisms that might help the
troubled steel industry, and were considering both the union’s
request for a Section 201 action and
regulatory changes that might make it easier for the industry to
win trade relief. While USTR
thought industry should bring the 201 case, some Commerce
officials felt the administration
should consider self-initiating an investigation. “It was an
emergency measure—that’s what it was
designed for,” says then Commerce Under Secretary David
Aaron. “We were in an emergency, and
I felt that was the right way to go.”
Officials at the White House, meanwhile, including President
Clinton; Chief of Staff
Bowles, later replaced by John Podesta; and Deputy Assistant to
the President Karen Tramantano,
were sympathetic to the steelworkers’ plight. But the White
House was also very concerned about
the message that self-initiating a Section 201 case would send.
“If we did this, it would be
interpreted that we had gone protectionist,” Aaron explains.
“The Democrats felt vulnerable [to
that charge] as a national party. They kept saying, ‘We have the
right to do this, it’s accepted in the
WTO, and maybe it’s even the best solution, but it would send a
terrible signal.’” Adds Klinefelter:
“We had tremendous access to the administration. But the
philosophical mindset was for free
trade. They did not want to send any signal that they were
deviating from that.”
Not surprisingly, most of the economists—members of the
National Economic Council, the
Council of Economic Advisers and the Office of Management
and Budget—and agencies
28. concerned with foreign policy, such as the State Department and
the National Security Council,
wanted to support free trade to the extent possible.
But the most powerful voice was that of Treasury Secretary
Robert Rubin. Rubin’s
handling of national and international economic issues over the
last four years had given him a
“stature within the administration that was beyond anything the
other members of the Cabinet
could possibly reach,” according to one well-placed observer. In
the midst of the deepening Asian
financial crisis—considered by many officials to be the world’s
worst financial crisis in 50 years—
Rubin’s paramount concern was to avoid any action that could
further destabilize financial markets
and lead to inevitable repercussions on the US economy. Part of
that effort was keeping the US
For the exclusive use of Y. Gao, 2017.
This document is authorized for use only by Yuanyuan Gao in
Industrial Organization II: Spring 2017 taught by Erich
Muehlegger, University of California - Davis from April 2017
to June 2017.
Standing up for Steel
_____________________________________________________
____ C15-02-1651.0
11
open to steel. “Any signals we sent that we would be closing
our markets could really destabilize
29. the markets, especially in Asia,” says one former White House
official. “The US was the importer
of first and last resort during that time period, so we recognized
the problem in steel could have
much larger ramifications.”
Rubin’s conviction that the US needed to keep accepting steel
imports set him solidly
against a Section 201, whether self-initiated by government or
filed by industry. “You have to give
him credit for the way in which he handled the whole crisis, and
the way the people on the Hill
and the people overseas had confidence in his ability to handle
it,” the union’s Klinefelter says.
“But we were coming to him and saying, ‘Mr. Secretary, what
you’re doing may be good for the
overall economy, but it’s going to have a flashback on us.’”
Due to the differing administration perspectives, reaching
consensus on a cohesive steel
policy was not easy. One official remembers appearing along
with union head George Becker
before the Senate Steel Caucus November 30 and worrying
because the administration didn’t have
a comprehensive strategy to announce, beyond promising a steel
action plan by early January, as
requested by a congressional resolution. “At the time, we were
saying vigorous trade law
enforcement, immediate forays with countries around the world,
and bilateral initiatives to have
them keep down their exports,” the official recalls. “I was quite
concerned at the time that it wasn’t
sufficient, but there were a lot of debates within the
administration about what to do.”
Meanwhile, the union and the second-tier steel companies
30. continued to press for
comprehensive relief. According to the American Iron and Steel
Institute, the average price per
metric ton for all steel imports had dropped more than 20
percent between January and October to
$400, the industry had lost 10,000 jobs over the previous year,
and steel mill capacity utilization
had fallen to 74 percent. Alarmed by the continuing slide, USTR
counsel Susan Esserman called
industry representatives into her office. “I said, ‘Let’s go over a
201 case. If you’re interested in a
201 case, we’re interested in working with you.’” But the
response, she says, was decidedly
unenthusiastic. Lawyers for the integrated steelmakers, on the
other hand, say they felt it was up to
the Clinton administration to take the lead. “We met with Sue
Esserman and our feeling was it’s a
wholly discretionary statute, and the president can do what the
president wants to do,” recounts
lawyer Alan Wolff. “If the president was not committed to the
notion that relief was warranted, it
would be something of a fool’s errand to go ahead.”
Perhaps more to the point, the steelmakers’ lawyers didn’t
believe that a comprehensive
201 case was winnable at the time, both because the import
surge was most pronounced in just a
few categories, such as hot-rolled steel and wire rod, and
because there wasn’t a long enough
history of import penetration and injury. Although overcapacity
had forced prices and profits
down, and US steel imports for the year had increased 37
percent over 1997, domestic companies
had shipped 102 million tons of steel in 1998 despite lower
overall employment—a production
level that was topped in the previous 20 years only by the peak
31. year of 1997—and eleven of the top
For the exclusive use of Y. Gao, 2017.
This document is authorized for use only by Yuanyuan Gao in
Industrial Organization II: Spring 2017 taught by Erich
Muehlegger, University of California - Davis from April 2017
to June 2017.
Standing up for Steel
_____________________________________________________
____ C15-02-1651.0
12
13 steel companies were still profitable. “If you have
diminished profits in a cyclical, capital-
intensive industry during the peak of the business cycle, is that
injury?” asks Wolff. “The ITC has
never found that. So our feeling was that the statutory criteria
as interpreted by the ITC could not
be met.” He adds however, that had the Clinton administration
chosen to self-initiate, it would
have improved the case’s chances “significantly.”
Although the Clinton administration continued to debate the
merits of a 201 case through
the end of 1998, Rubin’s opposition to market restraints carried
the day. “Clearly he did not want
to send any signals to our Asian trading partners,” Klinefelter
of the union recalls. “Their
economies were in danger of serious collapse. If we could
absorb some of that pain, he felt our
economy was strong enough and we were robust enough that we
32. could do it.” He adds: “I think
they felt that we’d weather it. The world economy would
stabilize, the imports would go down,
and we’d be back to normal.”
The January Steel Plan and the Negotiated Agreements
On January 7, 1999, the Clinton administration delivered the
steel action plan promised the
previous year. Titled, “Report to Congress on a Comprehensive
Plan for Responding to the
Increase in Steel Imports,” the program included a demand that
Japan cut steel exports to the US
back to pre-crisis levels; a system of earlier import monitoring,
since, as one former administration
official says, “There was the sense that somehow this crisis had
occurred and we hadn’t known it
was happening;” $300 million in tax relief for steelmakers,
spread over five years; financial
adjustment assistance for out-of-work steelworkers and hard-hit
steel mill communities; and a
continued commitment to strongly enforce all US trade laws.
“The Clinton administration’s
posture could be characterized as, ‘We will aggressively
implement the laws, but we are not going
to go beyond them,’” says Robert Lawrence, who that March
joined the Council of Economic
Advisers chaired by Janet Yellen as one of its two members.
“We will neither change the laws nor
violate them.”
Klinefelter, who says the January steel plan “was not considered
a bold new way to go,”
met with John Podesta and Karen Tramantano to reiterate the
union’s strong support for 201.
Although he got no definitive answer, Klinefelter says, it was
33. clear the administration would not
self-initiate.12
Industry also objected to the import agreements that the Clinton
administration announced
one month later. Since September 1998, Russian steelmakers
and government officials—alarmed by
Nor were steelmakers pleased. Instead of faster import
monitoring, industry for
months had been lobbying for a licensing system similar to
Canada’s, which didn’t restrict imports
but required a license or permit to import, allowing faster and
more accurate tracking of products
entering the country.
12
According to Klinefelter, “The Clinton administration had a
way of never saying no, but never saying yes.”
For the exclusive use of Y. Gao, 2017.
This document is authorized for use only by Yuanyuan Gao in
Industrial Organization II: Spring 2017 taught by Erich
Muehlegger, University of California - Davis from April 2017
to June 2017.
Standing up for Steel
_____________________________________________________
____ C15-02-1651.0
13
34. the sharp industrial and economic declines in that country—had
been pleading with the
administration not to impose dumping orders on Russian steel,
even publishing a full-page letter
to Vice President Al Gore in The Washington Post. In February,
Commerce announced two tentative
deals with Russia: an agreement suspending the dumping case
on hot-rolled steel, and a
comprehensive agreement covering all other steel exports. Hot-
rolled imports were to be cut back
to 750,000 tons a year, with a minimum price ranging from
$255 to $280 per metric ton. Both
agreements, which were to remain in effect five years, returned
steel exports to pre-crisis levels.
Former Assistant Secretary for Import Administration Robert
LaRussa, who led the
Russian negotiations, says the deals were designed to protect
US steel companies while still giving
Russia more access to the US market—and to much-needed
foreign currency—than it would have
had under the dumping order. According to foreign steel
attorney William Barringer, the US
government had another strong motivation in negotiating:
“Russia can export three things:
weaponry, oil, or steel. There was a lot of pressure within the
administration not to shut the
Russians out of this market for fear that they would ship other
products.”
The US steel industry, however, saw the agreements as another
example of the Clinton
administration’s willingness to sacrifice steel to some other
agenda. “Suspension agreements are
always done to help the foreigner,” says one US steel lawyer.
35. “They are never done to help the
domestic industry.” In a May 24 letter to Commerce Secretary
Daley, almost two dozen steel
executives expressed their opposition to the agreements.
“Foreign policy and other objectives do
not have a place in the administration of the antidumping laws,”
they wrote, adding later, “If
foreign aid is to be granted to Russia, it should not be at the
expense of a single American
industry.”
Ironically, because steel prices didn’t rebound as much as
expected after 1998, LaRussa
says, the minimum prices set as part of the suspension
agreement effectively excluded Russian hot-
rolled steel from the US market, contrary to administration
intentions. Nevertheless, the US steel
industry challenged both the Russian agreements and a similar
suspension agreement negotiated
with Brazil, charging that they allowed imports in at dumped
prices, and questioning Commerce’s
commitment to enforcing the dumping laws. The
administration’s actions apparently pleased
almost no one. Russian steelmakers and American steel users
also attacked the agreements,
claiming they were too restrictive to allow needed trade.
The 1999 Steel Legislation
As the administration worked with foreign trading partners—
negotiating agreements with
Russia and Brazil, pressuring Japan and Korea to cut exports
and correct market-distorting
practices, and appealing again to the EU to buy more Russian
steel—the Steelworkers Union was
tackling a separate set of initiatives. In a January 8 letter to
36. President Clinton, union President
George Becker wrote that given the limitations of the January
steel plan, “…we now have no choice
For the exclusive use of Y. Gao, 2017.
This document is authorized for use only by Yuanyuan Gao in
Industrial Organization II: Spring 2017 taught by Erich
Muehlegger, University of California - Davis from April 2017
to June 2017.
Standing up for Steel
_____________________________________________________
____ C15-02-1651.0
14
but to work with our supporters in Congress, of which there are
many, to pass into law the
absolutely vital relief which the Administration is apparently
unwilling to provide—legally
binding quantitative restraints which reduce steel imports to
their pre-crisis levels.”
Becker could confidently speak of congressional support. Much
of the union’s clout came
from its close ties to the more than 120 House and Senate
members of the Congressional Steel
Caucus. More important than these sheer numbers, committed
Caucus members like congressmen
Peter Visclosky (D-IN), Jack Quinn (R-NY), and Philip English
(R-PA), and senators Arlen Specter,
John Rockefeller, and Robert Byrd (D-WV) were senior
legislators in a position to cast swing votes
37. on key pieces of legislation. “We have people in the right places
to deliver a message and to deliver
members when you have a vote,” says Klinefelter. “I talked with
Rockefeller’s office and
Visclosky’s office every day. That’s how a union with less than
200,000 members could be as
effective as we were.”
Starting in January, both the House and the Senate debated
several pieces of union-backed
steel legislation. Key among these was the Steel Recovery Act,
introduced by Peter Visclosky and
Jack Quinn. While the bill included a number of provisions, its
main thrust was a quota cutting all
steel imports over a three-year period to the average monthly
volume during the three years
preceding July 1997. The administration immediately spoke out
in opposition. To impose a quota
unilaterally without an injury determination was a violation of
the rules of the WTO and, as
Commerce’s Aaron says, “was completely antithetical to the
administration’s philosophy of more
liberalized trade.” Adds a former White House official: “The
president and the vice president felt it
was important to use the trade remedies we had negotiated
assertively, but that we should make it
clear that we were operating within WTO consistency, and that
we expected other countries to do
the same.” The House, however, seemed to feel no such
compunction. As one former official puts
it: “One of the marvels of the American system of government
is that we can sign an international
agreement, the Congress can implement that agreement, and the
Congress can violate that
agreement. Domestic law has precedence over international
treaties.”
38. In place of the quota bill, USTR and the White House worked
quietly with Representative
Sander Levin (D-MI) on legislation that would change Section
201—making it easier for petitioners
to prove injury—and charge the ITC with addressing the
problem of anticompetitive practices in
foreign steel markets. The purpose of Levin’s bill, says attorney
Barringer, “was to try to give
Congress an alternative to a quota bill, so members could still
say, ‘We’re helping steel.’” The
administration wasn’t united in support of the bill, however.
One insider says some officials
argued the 201 injury standard should be lower, so that dumping
cases wouldn’t be overused
relative to 201; others argued that it was appropriate for
dumping standards to be lower, since they
dealt with unfair trade; and some said “any rewriting of our
laws to look less pro-trade would be a
very bad thing for world confidence and stability.”
For the exclusive use of Y. Gao, 2017.
This document is authorized for use only by Yuanyuan Gao in
Industrial Organization II: Spring 2017 taught by Erich
Muehlegger, University of California - Davis from April 2017
to June 2017.
Standing up for Steel
_____________________________________________________
____ C15-02-1651.0
15
39. While the union supported Levin’s bill, it threw its real weight
behind the quota
legislation, working the issue hard. “We had 1,000 or more
members in 150 congressional
districts,” Klinefelter explains. “If we have 1,000 or more
members in any congressional district,
we’re going to be a factor.” Industry, which didn’t want to
support legislation in violation of the
WTO, remained quiet.13
On March 17, the House passed the quota bill by a vote of 289
to 141, short of the two-
thirds majority needed to override a presidential veto. While
Klinefelter describes the vote as a
significant victory, others say it was more symbolic than
substantive. “The union’s hope was that
the votes in Congress, especially the House, would push the
ITC, the Commerce Department, and
others to consider their trade actions more favorably,” says
Finance Committee economist Greg
Mastel. Adds William Barringer: “It was a free vote for House
members, because they felt it
probably would be blocked in the Senate, but if it wasn’t
blocked in the Senate, it would be vetoed
by the president.”
The administration, for its part, spoke out against the quota
bill, one
official recounts, but did not expect to prevail. Although the
pro-free trade Republican leadership
might ordinarily have been expected to block quota legislation,
congressional sources say, Speaker
Dennis Hastert (R-IL) asked that the act be allowed to come to a
vote in order to put Clinton in the
awkward position of opposing a union-backed bill.
40. As administration officials were quick to point out, however,
the last thing President
Clinton wanted was to have to veto legislation backed by key
Democratic allies and a powerful
constituency like the steel union. Democratic Senator John
Rockefeller of West Virginia, who had
been a close friend of Clinton’s since the two were governors,
had been pushing the president to
self-initiate a 201 case since the previous fall.14 According to
Ellen Doneski, Rockefeller’s legislative
director, the senator was opposed to WTO-incompatible quotas,
and had earlier refused to back
such legislation. When it became clear that Clinton wouldn’t
bend on the 201, though, Rockefeller
introduced a Senate version of the House quota bill.15
This time, the administration launched a serious assault, holding
press conferences,
courting the Steel Caucus, and meeting with individual senators
and lobbyists. “After the vote in
the House, the administration was all over the Hill,” recalls
Klinefelter. In making its case against
trade barriers, the administration was joined by free trade
advocates in Congress; domestic steel
users concerned about quota-induced steel shortages and
inflated prices; and even a coalition of
farm groups, which sent a letter to the Senate in mid-June
warning that a steel quota would likely
spur foreign retaliation against US agriculture exports.
13
Weirton Steel, a struggling second-tier integrated mill, was
one of the only companies to publicly endorse the bill.
41. 14
West Virginia-based Weirton and Wheeling-Pittsburgh, the 8th
and 9th largest of the integrateds, were two of the
steelmakers most in danger of failing, and Rockefeller believed
only a comprehensive solution could save them.
15
Like the House, the Senate considered several steel bills,
including a measure similar to Levin’s bill, but the quota
bill garnered the most attention.
For the exclusive use of Y. Gao, 2017.
This document is authorized for use only by Yuanyuan Gao in
Industrial Organization II: Spring 2017 taught by Erich
Muehlegger, University of California - Davis from April 2017
to June 2017.
Standing up for Steel
_____________________________________________________
____ C15-02-1651.0
16
Even during the earlier House bill debate, the administration
had been poring over import
figures, looking for evidence that the already imposed dumping
cases and bilateral negotiations
had ended the import surge, thus making a quota unnecessary.
“The questions we kept asking
were, ‘Will the industry recover, and when will the industry
recover,” says then Council of
42. Economic Advisers (CEA) member Robert Lawrence, “hoping
that would take off the political
pressure and, indeed, help the industry.” Because of a buildup
of inventories, Lawrence says, the
domestic industry didn’t bounce back as quickly as some had
expected. But by May, Commerce
Secretary Daley was able to announce an encouraging drop in
imports and an increase in domestic
prices. By mid-June, although Klinefelter insists “there was not
much truth to it,” Daley was
declaring at every opportunity that the crisis was over.16
On June 22, the Senate effectively killed the quota bill in a
procedural vote. Improved
import levels were only part of the picture. Senators generally
were more attuned to foreign policy
considerations and less likely to pass this kind of special
interest legislation, observers say, in part
because they had to report to broader constituencies.
17
Although the quota effort died and none of the measures in the
House or Senate to change
Section 201 advanced, one piece of legislation went through
that summer that pleased the union
and at least a segment of the domestic steel industry. Senator
Robert Byrd, a senior member of the
Appropriations Committee, attached an amendment to an
emergency appropriations bill allocating
$1 billion to establish the Emergency Steel Loan Guarantee Act.
Under the act, troubled
steelmakers that met certain requirements could get loans from
private lenders that Treasury
would guarantee for up to 85 percent of the loan amount. Critics
43. charged that the amendment, also
backed by fellow West Virginia Democrat Senator Rockefeller,
was a blatant effort to bail out
failing steel mills in West Virginia, in particular Weirton.
“Senator Rockefeller has two major steel
manufacturers,” says legislative director Doneski, “and what he
didn’t want to have occur was for
the steel market to stabilize after one or two bankruptcies in
West Virginia.”
“It is a much more difficult place for us to
operate,” says Klinefelter, “because we just don’t have enough
people in enough states to control
the Senate.” Even some of the bill’s staunchest supporters admit
they never expected it to pass in
the Senate. Instead, they say, it was a necessary exercise to
show the union and concerned
companies that a quota bill was not doable, and that it was time
to try something else.
The Clinton administration didn’t like the amendment, but it
also didn’t go out of its way
to fight it. Ironically, the Byrd amendment may have been most
unpopular among segments of
industry. The better performing mini-mills and those companies
that had undergone successful
restructuring didn’t want to see uneconomic competitors kept
afloat by government subsidies, thus
adding to the problem of excess inefficient capacity.
16
Although import levels had not returned to 1997 levels, they
were well below the surge that began in August 1998.
17
44. Even senators from strong steel states also typically
represented exporting businesses or major steel users.
For the exclusive use of Y. Gao, 2017.
This document is authorized for use only by Yuanyuan Gao in
Industrial Organization II: Spring 2017 taught by Erich
Muehlegger, University of California - Davis from April 2017
to June 2017.
Standing up for Steel
_____________________________________________________
____ C15-02-1651.0
17
With a recovery in steel apparently underway, calls for a
government launched 201
investigation mostly subsided. A flurry of trade cases worked
through the system—industry had
filed dumping cases in cold-rolled steel, steel beams, and two
different sizes of pipe, as well as two
Section 201 cases in pipe and wire rod. Meanwhile, some
observers blamed the failure of the WTO
Ministerial in Seattle that fall in part on the unwillingness of
the US to allow discussion of
dumping laws. LaRussa and Aaron of Commerce, however, say
that countries opposed to
launching a new trade round called for new dumping
negotiations, knowing that the US would
refuse, and that they could then blame the collapse of the
ministerial on US intransigence.
45. A Brief Recovery—A Further Fall
For the steel industry, the year 2000 began with some promise.
Imports had fallen, at least
in some key categories, and the US economy was strong.
Domestic demand for steel in autos and
construction was booming, and steel mill capacity utilization
had increased markedly from the
1998 slump. Still, steel industry profits remained low. Prices
had not fully recovered, nor did
imports drop to their pre-1998 level.
In July, Commerce released the Global Steel Trade Report, a
steel market study promised
the previous year after the failure of the quota legislation.
Because the report had been modified
through an inter-agency review, with particular care not to
include anything that could harm the
presidential candidacy of Vice President Gore, the
recommendations were “pretty limp,” says
David Aaron, who left Commerce in April . “I would have liked
to have seen them recommend a
201 and an international initiative. I felt that having talked to
some of the foreign steel people and
countries that they would not take us seriously without at least
starting a 201.” He adds: “Once we
got to this report, all the easy things we could do ourselves,
apart from 201, had been exhausted.”
Nevertheless, industry and the union embraced the document,
which summarized unfair
and uneconomic practices in other countries, and how those had
affected the US steel industry and
the problem of global overcapacity. Klinefelter, who calls the
report “an incredibly valuable
document,” says, “It was the first time that our government had
46. ever laid out what our trading
partners were doing to us in a systematic fashion in regard to
steel.”
By the time the report came out, however, another downturn had
begun. Due in part to
price increases announced by domestic producers earlier in the
year, steel imports had risen in
early 2000. After the nation’s industrial sector began to slow in
May, steel buyers cut back on
imports, but even so, weakened domestic demand for steel drove
down plant capacity utilization
rates once again. Excess inventory and flagging sales soon took
a toll on prices: By the fall, hot-
rolled steel was selling for only $180 a ton, about half what it
had gone for in the early spring. Steel
For the exclusive use of Y. Gao, 2017.
This document is authorized for use only by Yuanyuan Gao in
Industrial Organization II: Spring 2017 taught by Erich
Muehlegger, University of California - Davis from April 2017
to June 2017.
Standing up for Steel
_____________________________________________________
____ C15-02-1651.0
18
company stock prices also plummeted, drying up available
sources of capital.18
By the beginning of October, with the presidential campaigns of
47. Gore and Texas Governor
George W. Bush running neck-and-neck, and both candidates
struggling to lock in key
constituencies, union head George Becker began meeting with
Karen Tramantano and John
Podesta, pleading for the Clinton administration to self-initiate
a 201 case.
The steel slump,
coming as it did just two years after the surge of imports in
1998, hit particularly hard. “You had
them getting absolutely hammered in ‘98, you had a little bit of
a recovery going into 2000, then the
bottom fell out, so [the integrated steelmakers] didn’t really
have any reserves left,” says a former
Senate Finance Committee staffer.
19
The chorus of calls for the administration to self-initiate was
understandable. Although
some Clinton representatives had insisted all along that a
Section 201 case brought by industry
would have as much chance of success as one self-initiated by
government, virtually no one in the
union or in industry agreed. Instead, most observers concurred,
having the administration self-
initiate changed the equation in important ways. First, self-
initiation demonstrated that the
president had already concluded that imports were the cause of
serious injury. “It’s a signal to the
trading partners, it’s a signal to the ITC, it’s a signal to the
courts who may be looking at an
appeal,” says former ITC Commissioner Thelma Askey. “It’s a
lot different when the
administration says, ‘We think that given all the considerations
48. of the broader economy, this
warrants our backing.’”
In an October 16 letter
to President Clinton, the union and more than 70 representatives
of steelmakers and related firms
wrote: “We need a clear public recognition that once again there
is a crisis devastating the domestic
steel industry and that the existing orders affecting the industry
must remain in place. We need
you to immediately impose meaningful restraints on steel
imports from offending non-WTO
countries. Finally, given this extraordinary circumstance, we
need the Administration to
immediately initiate a comprehensive case under Section 201 of
our trade laws. Only through these
actions can we stop the onslaught we are facing.” Members of
Congress, in support, began working
on legislation calling on the administration to self-initiate a 201
case.
In addition, if the administration brought the case and it was
successful, industry
presumably could count on the president using his discretion to
impose a significant trade remedy.
Finally, and perhaps most important, some observers say, if the
ITC ruled against the 201, the
president might still feel bound to provide industry with some
meaningful relief. “What it all boils
down to was putting the president on the hook for a
comprehensive solution,” says William
Corbett, then on the staff of the National Economic Council, “so
that regardless of the outcome at
18
49. One former administration official recalls the head of a major
steel firm shouting in a meeting that the value of a
share of stock had fallen to less than a cup of latte.
19
As an indication of the union’s desperation, Becker even
appealed to the administration to provide steel industry
protection under a national security provision, but that, one
official says, “didn’t have a chance in hell,” since only
a fraction of US steel capacity went to the military.
For the exclusive use of Y. Gao, 2017.
This document is authorized for use only by Yuanyuan Gao in
Industrial Organization II: Spring 2017 taught by Erich
Muehlegger, University of California - Davis from April 2017
to June 2017.
Standing up for Steel
_____________________________________________________
____ C15-02-1651.0
19
the ITC, the president of the United States is responsible for
assisting the industry out of its crisis.”
Given how few comprehensive solutions existed, Corbett says,
any such relief could easily run
afoul of WTO rules concerning quotas or subsidies.
The union appeal, coming as it did just weeks before the
presidential election, put the
50. administration on the spot—as it was no doubt intended to do.20
But in a letter to Clinton the following day, the Executive
Committee of the Congressional
Steel Caucus complained that the time for more studies was
over. “As you know, a Section 201
action would result in a comprehensive investigation of steel
imports, similar to the investigation
you already propose,” the letter read in part. “Any remedy
proposed at the end of this
investigation would be implemented at the discretion of the
President. If the next President feels
action is unwarranted, he could choose not to act.” On the same
day, however, the Consuming
Industries Trade Action Coalition, a group of steel-using
companies formed in 1999, wrote Clinton
arguing that the steel industry had exaggerated the impact of
imports, and that severe trade
restraints would hurt far more companies and employees than it
would help.
“We could say, ‘No, we won’t
initiate,’” says former CEA economist Robert Lawrence, “but
that would put a big wedge between
Gore and the steelworkers. But if we said, ‘Yes,’ we would be
labeled protectionists.” In mid-
October, the principals began meeting again in earnest on the
steel issue, and Gene Sperling
convened meetings among Becker, various steel industry CEOs,
and the major economic policy
makers in the administration to further analyze the crisis. In an
October 25 letter to Becker, John
Podesta assured the union head that the president was still
reviewing Section 201 relief, and that
USTR was simultaneously consulting with countries including
the Ukraine, Taiwan, India, and
51. China about moderating their steel exports.
According to White House insiders, the ensuing administration
debate on immediate self-
initiation of a 201 centered on three main areas of concern: the
political ramifications of any
decision on the upcoming election; the likelihood of the ITC
reaching a positive finding; and the
broader economic impact—both in the US and abroad—of such
a trade-limiting measure. While
those involved say the short-term political effect was given the
least attention, administration
strategists concluded there was more to lose than gain by
initiating. “We had the steelworkers on
our side in the campaign already,” says David Aaron, formerly
of Commerce, “so we weren’t
going to get anything out of it, except that we would hand Bush
an issue to say that we were
protectionist.”
A more critical question, insiders say, was whether a 201 case
would even be winnable.
According to former CEA member Lawrence, because imports
were subsiding, it would be hard to
20
Economist Greg Mastel notes that elections had played an
important role in past steel trade policy decisions.
President Reagan, for example, endorsed voluntary restraint
agreements during his re-election campaign. “Unions
and companies are both aware in elections that they have some
unique influences,” Mastel says, “and they use
them.”
52. For the exclusive use of Y. Gao, 2017.
This document is authorized for use only by Yuanyuan Gao in
Industrial Organization II: Spring 2017 taught by Erich
Muehlegger, University of California - Davis from April 2017
to June 2017.
Standing up for Steel
_____________________________________________________
____ C15-02-1651.0
20
prove they were the major cause of the industry’s distress.
Moreover, just six months earlier, the
ITC had ruled against industry during the injury part of a
dumping case on cold-rolled steel—a
case with lower injury standards than a 201.21
Perhaps most significant, however, was the fact that industry
had also apparently
concluded that the case wasn’t ripe. Despite the steel company
signatures on the letter to Clinton
calling for self-initiation of a 201, industry lawyers at a USTR
meeting held soon after that included
Esserman, Lawrence, and Klinefelter “spent most of the time
saying there was no case to be made,”
recalls one participant. Esserman, who says she would have had
to rely on steel company data to
judge whether a 201 case could succeed, says government would
not have considered self-
initiating without the full support of industry. “It was
disquieting to know that the industry
lawyers most familiar with the facts did not think it was a good
53. option,” she recalls. “There was an
immense interest coming from the White House and from
various agencies to do something that
would be genuinely helpful, and not simply a political stunt.”
Given that a few steel product areas were still doing
reasonably well, that industry had only posted one quarter of
bad economic results, and that
certain product segments were already protected by dumping
orders, winning a comprehensive
case appeared unlikely. “It seemed to me that the immediate
problems of the steel industry were
caused by a combination of too much capacity and a slowdown
domestically,” Lawrence recalls.
“The biggest source of their injury was not imports.”
Finally, although Robert Rubin had left Treasury, his successor,
Lawrence Summers, was
equally adamant that a Section 201, even though temporary,
would be bad for the US economy and
would send the wrong message to foreign trading partners,
possibly spurring retaliatory trade-
restricting measures. “If you looked at US economic interests
overall in the eight years under the
Clinton administration, it was pretty clear that regular
predictable access to foreign markets was an
enormous part of our economic success,” explains one
administration official. “As the world’s
largest exporter, our vulnerability to retaliation was very high
in a lot of industries that employ as
many or many times more workers than steel.”
One final issue influenced the decision. According to many
observers, Bill Clinton was
acutely aware of his legacy. While he was proud of his trade
record overall, including such
54. significant accomplishments as winning approval of the North
American Free Trade Agreement,
the president had been discouraged by his failure to get fast-
track negotiating authority, which
would have strengthened his ability to negotiate trade
agreements.22
21
The ITC decision provoked outrage among industry and union
representatives, who claimed the commission had
relied on an inappropriate econometric model in making its
decision, rather than the usual analysis of market
conditions. In a letter of complaint to President Clinton, Becker
and three steel executives pointed out that
Commerce had already found dumping margins ranging from 16
to 80 percent, and that the volume of cold-rolled
imports had doubled between 1996 and 1998 to 2.2 million tons.
Self-initiating a 201 case, in
22
Fast-track negotiating authority would give Clinton the ability
to negotiate trade agreements that Congress could
either vote down or approve, but could not amend. The authority
increased the willingness of foreign governments
to negotiate with the US.
For the exclusive use of Y. Gao, 2017.
This document is authorized for use only by Yuanyuan Gao in
Industrial Organization II: Spring 2017 taught by Erich
Muehlegger, University of California - Davis from April 2017
to June 2017.
55. Standing up for Steel
_____________________________________________________
____ C15-02-1651.0
21
the eyes of some, would have further sullied Clinton’s free trade
credentials. “He didn’t want to
add another black mark to his second term record on trade,”
says one insider.
Election day arrived November 7 without a decision to self-
initiate. “We were pushing
them, pushing them, pushing them, trying to get Al Gore
elected,” says Klinefelter. “We were
telling them that they had to do something very visible for Gore
for us to bring back to those steel
states. They wouldn’t do it.”
The Post-Election Transition
The results of the 2000 presidential election were mired in
controversy over vote-counting
irregularities in Florida. Even after it became clear that George
W. Bush would be the next
president, however, the Section 201 debate lingered on.
Klinefelter, who notes that Bush narrowly
won normally Democratic West Virginia, says the results might
have been different if the Clinton
administration had self-initiated a 201. “It would have gone a
long way if he could have walked
into West Virginia saying that this administration has initiated a
201 to save the basic steel
56. industry,” he says. Although industry remained ambivalent
about the trade case, union and Steel
Caucus representatives who had Clinton’s ear still hoped they
might convince the president to self-
initiate. “We pushed on 201 with Clinton right up to the end,”
says Rockefeller legislative director
Ellen Doneski.
Within the administration, there were also still a few
individuals who believed Clinton
should bring a 201. Domestic steel industry results, after all,
had continued to deteriorate.
Wheeling-Pittsburgh filed for bankruptcy in November,
followed by LTV, the nation’s third largest
steel producer, at the end of December.23
In the final analysis, however, many of Clinton’s top
policymakers still didn’t believe that a
Section 201 was a legitimate response. Although the steel
industry was unquestionably suffering,
Lawrence says, the downturn was primarily due to the
weakening US economy. “We thought it
wasn’t good policy, because we thought we couldn’t make the
case that these people merited it,”
he explains. “Our hearts bled for the steel industry, but we
didn’t think they were being damaged
by imports.”
Moreover, some 201 supporters claimed that self-
initiating would be a politically astute move—an argument that
Senator Rockefeller made
repeatedly. “We could easily have used the logic that we will
show our friends in the steel industry
that we care about them,” says Robert Lawrence. “We will send
this thing to the ITC and put huge
pressure on the next Republican president to give them
57. protection.”
The union never gave up on its push for 201. According to
Klinefelter, on January 19, six
hours before the administration left office, he and Becker went
to the White House to make a final
23
A number of smaller companies had already filed.
For the exclusive use of Y. Gao, 2017.
This document is authorized for use only by Yuanyuan Gao in
Industrial Organization II: Spring 2017 taught by Erich
Muehlegger, University of California - Davis from April 2017
to June 2017.
Standing up for Steel
_____________________________________________________
____ C15-02-1651.0
22
pitch to Summers, Podesta, and a few others. Instead of a trade
case, though, Klinefelter says, all
the union won was a letter from Clinton to the chairman of the
ITC, urging him to look hard at the
merits of a 201 case. In the letter, Clinton summarized the
administration’s steel initiatives, noting
that it had processed more than 100 dumping and countervailing
duty cases involving steel
products since 1998; negotiated the Russian agreements;
58. initiated consultations with Japan, Korea,
and other significant steel exporters; and completed the global
steel study, among other measures.
“In spite of these efforts, however,” the president concluded,
“our analysis of the current and
prospective import situation and recent events in the steel
industry lead us to believe that Section
201 relief may be warranted in the near future. Therefore, I urge
the International Trade
Commission to proceed urgently, on its own motion or upon the
motion of industry, union,
Congressional or Executive Branch petitioners, to provide
effective relief for the US steel industry.”
For the union, it was too little, too late. According to one
outgoing administration official,
George Becker was particularly bitter, declaring, “You didn’t
give us any help at all.”
The Case for a 201
Although many Democratic members of the Steelworkers Union
and Congressional Steel
Caucus didn’t have established relationships with newly
inaugurated President George W. Bush or
his Cabinet, the change of administration didn’t slow their
efforts to win protection from steel
imports. Senator John Rockefeller, for example, wrote President
Bush within days of his
inauguration urging him to self-initiate a Section 201, and soon
met with Vice President Dick
Cheney, Commerce Secretary Donald Evans, and White House
political staff. “The Senator has
made the case to those whom he thought would be sensitive not
just to the economic or the
business or the trade argument, but the political argument,” says
59. Ellen Doneski. “They’re certainly
interested in winning West Virginia again.”
The quickly worsening condition of the steel industry also
spurred a new round of
legislation. On March 1, representatives Peter Visclosky and
Jack Quinn introduced the Steel
Revitalization Act of 2001, a sprawling four-pronged bill that
dwarfed the congressmen’s 1999
quota bill. In addition to a more restrictive quota provision, the
act increased the funds available
under Senator Byrd’s loan guarantee program to $10 billion and
upped the government-
guaranteed percentage from 85 to 95 percent; set a 1.5 percent
surcharge on all steel to bankroll a
legacy cost fund that companies could draw on for retirees’
health care; and established a $500
million grant program to encourage consolidation within the
domestic steel industry by funding
environmental cleanups and restructuring.24
24
Only one company, Geneva Steel, had received funds under
Byrd’s original loan guarantee program, in part
because applicants looked like such bad risks that commercial
banks didn’t want to assume responsibility for even
a 15 percent portion of the loan.
For the exclusive use of Y. Gao, 2017.
This document is authorized for use only by Yuanyuan Gao in
Industrial Organization II: Spring 2017 taught by Erich
Muehlegger, University of California - Davis from April 2017
60. to June 2017.
Standing up for Steel
_____________________________________________________
____ C15-02-1651.0
23
Finally, in a reversal of its former position, the steel industry
joined the union and
Congress in calling for comprehensive relief. “One is driven by
the circumstances in which one
finds oneself—the factual and policy bases for getting relief in
a section 201 case were now
satisfied,” sums up steel lawyer Wolff. In March, a broad-based
coalition of steel associations
called for the administration to self-initiate a 201 case, or to
find some other WTO-compatible way
to restrict imports.25
Driving industry to unity was an accelerating decline that went
well beyond the bad news
of 1998, as demand for steel dried up along with the slowing
domestic economy. Even with
imports down, capacity continued to exceed demand, and hot-
rolled and cold-rolled sheet prices
fell that spring to their lowest point in 20 years. A total of 18
steel companies had filed for
bankruptcy since the end of 1997, and about 23,500 workers had
lost their jobs. Moreover, between
November 2000 and June 2001, more than seven million net
tons of capacity in the US shut down.
“It’s a fair assessment to say that the domestic industry was
being absolutely devastated,” says an
61. inside observer. “You can argue about whose fault it was, but
the reality is you had a quarter of the
industry in bankruptcy, you had seven million tons of it shut
down as a result of actual
liquidations, and you had stock valuations that had fallen
through the floor.”
While mini-mills and integrated steel companies still disagreed
about whether
government should help with legacy costs and restructuring,
they were united on the need for
protection from excess global steel.
Adding to industry’s interest in a Section 201 was the reality
that dumping cases no longer
seemed adequate to stem imports. As quickly as a dumping
order shut off product supply from
one country, another steel entrant stepped up exports of the
same product to fill the gap. Despite
the earlier successful hot-rolled steel dumping cases brought
against Japan, Russia, and Brazil, for
example, imports of hot-rolled steel crept up again in 2000 until
a group of companies led by
Nucor filed a second round of cases against 11 countries,
including India, South Africa, China, and
the Ukraine. “The global steel market is much more elastic than
it used to be,” says Klinefelter.
“People know how to shop around, and these items can be made
in any country in the world
where there is a steel mill, so things move much more quickly
than they used to.”
Industry may also have felt that the ITC would be more
receptive to a 201 case than at any
other time in recent history. At the end of his tenure, President
Clinton had decided not to re-
62. nominate Commissioner Thelma Askey at the urging of the
Steelworkers Union and the
Congressional Steel Caucus, whose members claimed Askey’s
aggressive free-trade stance had
earned her the commission’s worst voting record on trade relief
for steel. Although President Bush
had attempted to re-appoint Askey, he withdrew her nomination
after encountering opposition
from legislators whose support was critical to moving his tax
bill through the House Ways and
25
The coalition included the American Iron and Steel Institute,
the Cold Finished Steel Bar Institute, the Committee
on Pipe and Tube Imports, the Specialty Steel Industry of North
America, and the Steel Manufacturers Association.
For the exclusive use of Y. Gao, 2017.
This document is authorized for use only by Yuanyuan Gao in
Industrial Organization II: Spring 2017 taught by Erich
Muehlegger, University of California - Davis from April 2017
to June 2017.
Standing up for Steel
_____________________________________________________
____ C15-02-1651.0
24
Means and Senate Finance committees.26 According to many
observers, Askey’s replacement,
63. Dennis Devaney, was seen as a more reliable vote for
protection.27
A Plan for Steel
“The union has changed the
complexion of the commission sufficiently so that it is very
difficult for them to lose,” says one
critic.
Given the steel industry’s clear sense of desperation, the steel
issue was “up front and
center” for the new Bush administration, according to one
official, who says there was also
“intense pressure from the Hill,” even from legislators who had
always opposed a quota concept.
Commerce Secretary Evans, Treasury Secretary Paul O’Neill,
and USTR Robert Zoellick took the
lead, aided by CEA Chairman Glenn Hubbard, spending hours
with Wall Street analysts to study
the industry.28
On the surface, steel’s chances of getting the Bush
administration to act on a 201 might
have seemed low, in view of the Republican Party’s historic
support of free-trade principles, and
Bush’s specific focus on issues of free trade and non-
interference in markets during his campaign.
But some observers, noting that the Republican administrations
of Reagan and George Bush senior
had implemented the arguably protectionist voluntary restraint
agreements, claimed that Bush
might feel free to act precisely because of his free-trade
reputation. “After all, it took Nixon to go to
China,” says Peder Maarbjerg, legislative director for
Representative Peter Visclosky. “It took
64. Clinton to reform welfare. Bush already had all the business
people on his side.” Adds Rockefeller
aide Doneski: “The Republicans weren’t afraid to look like they
were willing to use our trade laws,
because nobody is going to accuse them of being anti-free
trade.”
Meanwhile, the National Security Council and the National
Economic Council doled
out research assignments to the various agencies.
Even with industry’s support, the question remained of whether
a case could be made that
imports were the primary cause of injury, as required under
Section 201. Preliminary Commerce
figures at the end of May showed that steel imports through
March were 6.2 million metric tons, a
more than 30 percent decrease from the year earlier period. In
order to implicate imports in the
current industry slide, a 201 case would have to employ a five-
year trend line encompassing the
earlier 1998 import surge. Considering that steelmakers had
never fully recovered from the 1998
crisis, though, 201 supporters argued that linking the two
downturns was legally sound.
By May, the Bush administration—convinced that the steel
industry needed some kind of
intervention—was seriously grappling with the possibility of
self-initiating a 201. To do so could
26
Bush nominated Askey instead to be director of the US Trade
and Development Agency, a government agency
65. dedicated to encouraging US exports to developing and middle-
income countries.
27 After not re-appointing Askey, Clinton had put Devaney on
the ITC as a recess appointment.
28
Steel got unusual high-level attention, some insiders say,
because few sub-Cabinet level positions had been filled.
For the exclusive use of Y. Gao, 2017.
This document is authorized for use only by Yuanyuan Gao in
Industrial Organization II: Spring 2017 taught by Erich
Muehlegger, University of California - Davis from April 2017
to June 2017.
Standing up for Steel
_____________________________________________________
____ C15-02-1651.0
25
bring significant political rewards. USTR Robert Zoellick
believed a 201 case could serve as an
olive branch to the union and the Steel Caucus, insiders say,
improving the president’s chances of
winning trade promotion authority—formerly known as fast-
track. With trade promotion
authority, Bush would be in a better position to pursue two key
goals— negotiating a Free Trade
Area of the Americas and launching a new WTO trade round.29
“His hope was not to get the
support of the unions for either of those endeavors,” says
66. foreign steel attorney William Barringer,
“but to make steel a non-issue in at least launching those
initiatives.”30
White House Senior Advisor Karl Rove and other political
strategists were also reportedly
pushing for a 201, arguing that it would help Bush promote non-
trade issues—such as tax cuts and
education reform—as well as build support in key electoral
states in preparation for the next
presidential election. Klinefelter says the strategy was sound.
“In 2004, Bush could go into
Pennsylvania, Ohio, Indiana, Illinois, and West Virginia and
say, ‘I’m the president who saved
your job.’ Now it doesn’t make any difference what the
leadership of the Steelworkers Union says
about the next Democratic presidential candidate. If Bush comes
through on this 201, he’s going to
get our guys.”
But insiders insist political motives were taking a backseat to
policy considerations. Evans,
O’Neill, and Zoellick were more interested in tackling the
global steel industry’s chronic issues of
subsidies and inefficient excess capacity than they were in
blocking imports, observers say. But
they reasoned that a 201 case could provide temporary relief,
while helping to persuade
steelmakers—both domestically and abroad—to address the
industry’s deeper problems. Officials
weren’t sure what form such discussions should take, or whether
they should be bilateral or
multilateral, but they resolved to pursue some form of
international steel negotiations. “People
realized that if we didn’t act, there was a good chance we were
67. going to get steel quotas or
something else that was going to gum up the works in terms of a
broader trade agenda,” one
official says.
While still deliberating at the end of May, the White House got
an unexpected prod.
Rockefeller and other steel-supporting members of the Senate
Finance Committee had wanted the
committee to take the initiative and launch a 201 since the
beginning of the year, but Republican
Chair Charles Grassley (R-IA) had blocked progress on the
motion. After Senator James Jeffords
(R-VT) defected from the Republican Party, however, giving
control of the Finance Committee to
the Democrats, the new chair, Montana Democrat Max Baucus,
vowed to move ahead. Had the
Finance Committee been first to initiate, many observers say,
the Democrats would have grabbed
much of the political capital to be gained from the action.
29
A Free Trade Area of the Americas agreement would lower
tariffs and encourage open borders within the Western
Hemisphere.
30
The likely impact of a 201 self-initiation on long-held
congressional stands on trade, however, was debatable. As
one former Clinton official says: “The Democrats in Congress
still have to work with the unions. I don’t know that
the unions are just going to roll over and say, ‘Go ahead and get
your fast track and sign your WTO agreement.’”
68. For the exclusive use of Y. Gao, 2017.
This document is authorized for use only by Yuanyuan Gao in
Industrial Organization II: Spring 2017 taught by Erich
Muehlegger, University of California - Davis from April 2017
to June 2017.
Standing up for Steel
_____________________________________________________
____ C15-02-1651.0
26
The administration, however, moved first. In a step that took
industry, the union, and
Congress by surprise, President Bush announced June 5 that his
administration would self-initiate
a 201 investigation for 33 types of steel imports.31
A Measure of Protection
Declaring that, “The US steel industry has been
affected by a 50-year legacy of foreign government intervention
in the market and direct financial
support of their steel industries,” Bush also announced that his
administration would conduct two
sets of international steel negotiations—one to eliminate
inefficient excess global capacity, and a
longer term effort to reduce market-distorting subsidies. “They
sat down and they actually came
up with a coherent plan, not all of which we had suggested,”
says steel lawyer Wolff. “The Clinton
administration really never came to grips with what could be
69. done, although, to be fair, its options
were more limited. By the time the Bush administration acted,
the crisis had fully arrived, and
more tools were clearly available.”
President Bush’s unanticipated announcement elicited an
immediate and powerful
response. “It is an important message that the United States will
not allow its steel industry to be
destroyed by illegal steel imports,” declared James G. Bradley,
president of Wheeling-Pittsburgh.32
Those opposed to trade barriers and special protection for steel,
however, reacted with
anger and concern, accusing the Bush administration of caving
in to union and industry pressure.
“A Section 201 investigation is a very serious step,” Janet
Kopenhaver, executive director of the
Consuming Industries Trade Action Coalition—the steel users
group—declared in a written
statement. “If it results in restricting steel imports, it could
severely impact US consumers and steel
consuming industries, but won’t solve the US industry’s basic
problems.” Similarly, in letters sent
to Zoellick, Evans, and O’Neill, the president of the American
Institute for International Steel
wrote, “Our firm belief is that the current difficult conditions
the US steel industry finds itself in
stems from living in a protected steel market for over 30 years
and benefiting from subsidy
programs provided by federal, state and local governments.
Simply put, protectionism and
subsidies do not create competitive industries.”
For the union and Steel Caucus representatives who had
70. invested so much time and energy during
both the Clinton and Bush administrations, the action was a
long awaited payoff, and a welcome
sign of the new president’s receptiveness to steel concerns. “I
was so frustrated with the Clinton
people, and disappointed in the way that they dealt with this,”
says Klinefelter. “I’ve got to say,
this Bush administration seems to care more about working
people. They care more about jobs, and
that’s what working people are about.”
31
The Senate Finance Committee later filed a 201 case
structured on the administration’s case as evidence of Hill
support.
32
Leslie Wayne, “A Significant Lift for a Long-Ailing US
Industry,” The New York Times, June 6, 2001.
For the exclusive use of Y. Gao, 2017.
This document is authorized for use only by Yuanyuan Gao in
Industrial Organization II: Spring 2017 taught by Erich
Muehlegger, University of California - Davis from April 2017
to June 2017.
Standing up for Steel
_____________________________________________________
____ C15-02-1651.0
27
71. Foreign trading partners also expressed their strong displeasure,
in particular, EU
representatives, who blamed US steel woes on the fact that
industry had shirked the painful and
across-the-board consolidation undertaken by European steel
firms over the last two decades. Five
EU steelmakers were among the world’s ten largest steel
producers, EU officials noted as proof of
European industry reform, while the largest American producer,
U.S. Steel, came in at number
eleven. “The cost of restructuring in the US steel sector should
not be shifted to the rest of the
world,” European Trade Commissioner Pascal Lamy asserted in
a statement. “The imposition of
safeguard measures would risk seriously disrupting world steel
trade.”33
On June 22, Robert Zoellick formally self-initiated the 201
action on behalf of the
administration, with an ITC decision expected four months
later. How the ITC would rule was
debatable, particularly given the fact that many observers in
mid-2001 still questioned whether the
proper conditions existed to bring a 201 case. Nevertheless, in
October 2001, the ITC gave a clear
vote in favor of safeguards, ruling that imports were injuring
US steel producers in 16—or almost
half—of the 33 categories under investigation. In December, the
commissioners recommended
remedies ranging from moderate quotas to prohibitive tariffs of
30 to 40 percent.
34
72. During January and February, the Bush administration was
flooded with appeals. These
ranged from an EU proposal that—in lieu of tariffs—the US
impose a tax on both domestic and
imported steel shipments to help cover industry legacy costs and
aid in restructuring, to a letter
signed by 140 Congress members advocating across-the-board
tariffs that would run a full four
years. On March 6, 2002, after intensive consultations with
political and economic advisers,
President Bush announced what many observers termed a
carefully balanced compromise. The US
would impose three-year safeguards on ten of the 12 categories
of steel imports, with tariffs
ranging from a low of 8 percent for stainless steel rod to a high
of 30 percent for flat-rolled and
three other categories of steel. The tariffs, which went into
effect March 20, were slated to drop
each year of the three-year remedy period.
It would be up
to the president to decide on the exact remedy, if any.
Softening the blow, however, were a number of exclusions. All
countries with free trade
agreements with the US were excluded—most notably Canada
and Mexico—as were developing
nations with imports to the US of less than 3 percent of the
domestic market.35
33
Alan Cowell, “Swift Condemnation of US on Steel,” The New
York Times, June 7, 2001.
73. In certain categories
of steel, these exclusions amounted to as much as 35 percent of
imports. Also excluded were
certain steel products that US manufacturers didn’t make or
weren’t interested in making
themselves. Over the next few months, the Bush administration
promised to evaluate the many
hundreds of further requests for exclusions it had received, both
from domestic steel makers and
users, and from foreign petitioners.
34 The actual remedy recommendation covered 12 categories,
since the ITC combined five groups into one.
35 In addition to Canada and Mexico, Israel and Jordan had
free trade agreements with the US, and more than a dozen
developing countries qualified for the exclusions.
For the exclusive use of Y. Gao, 2017.
This document is authorized for use only by Yuanyuan Gao in
Industrial Organization II: Spring 2017 taught by Erich
Muehlegger, University of California - Davis from April 2017
to June 2017.
Standing up for Steel
_____________________________________________________
____ C15-02-1651.0
28
The World Reacts
The reactions of various constituencies to the tariffs were, for