03 06-2021
•
0 likes•7 views
This document provides the schedule for construction activities from June 3 to June 9 for the CP-SEZ project by Alok Infracon Pvt Ltd. Key activities include backfilling, laying gravel sand bedding, floor paving concrete, shuttering, reinforcement, concrete work, anti-termite treatment, and brick work. The schedule specifies the areas and sections where each activity will take place over the course of the week.
Report
Share
Report
Share
Download to read offline
Recommended
Project Involved in Oil & Gas Industry 
This document outlines several oil and gas projects undertaken by three companies - Tanjung Offshore Services Sdn Bhd, EPIC Mushtari Engineering Sdn Bhd, and Ramunia Fabricator Sdn Bhd. It describes projects ranging from wellhead upgrades, piping replacements, and platform maintenance for clients including Petronas Carigali Sdn Bhd, FPSO Ventures Sdn Bhd, and Sarawak Shell Berhad carried out between 2008-2014. The projects involved engineering disciplines like structures, piping, fabrication, and commissioning activities on offshore platforms and vessels.
CV Bernard Graves
Bernard Graves is a British cost estimator with over 30 years of experience in the oil and gas industry. He currently works as a lead estimator for Genesis Oil & Gas Consultants Ltd, where he has performed cost estimates for numerous offshore and onshore projects around the world. Previously, he held estimator and project manager roles for several engineering and construction companies, where he was responsible for capital and operating cost estimates, cost control, and project management.
Projects Involved
The document outlines the work experience and training of a field service erection engineer specializing in turbine blading at GE Power Solutions in Malaysia from May 2014 to present. It lists 14 projects the engineer worked on in various countries involving inspection and upgrades of gas turbine blades. It also lists 9 safety and technical training courses completed, including courses on blading, seals, carriers and base fleet operations at the Alstom training center in Switzerland as well as safety certifications in Malaysia. The engineer has gained extensive experience inspecting and upgrading gas turbine blades on projects across Asia and Europe.
CSM_Profile
CSM Construction provides telecommunications network planning, design, construction, operation and maintenance services. It offers turnkey solutions or customized services for network design, build and maintenance. The company prides itself on executing challenging projects across India with experienced professionals. Its services include civil works, electrical works, cable network installation, and rights of way acquisition. It aims to complete cable laying projects on schedule with customer satisfaction.
Al Qasr Mall presentation
This document provides an overview and status update of the Al Qasr Mall project in Saudi Arabia. It summarizes that the project is 99.6% complete, with construction of core packages finished and critical milestones like energizing transformer rooms achieved. It also lists potential additional works and notes 44.18% of the mall's leasable area is fitted out and ready for tenants. Key pre-opening tasks are still needed before the mall can open.
Abdullah Jaber Civil Eng CV EXP. 5 yrs
Abdullah Jaber is a civil engineer from Jordan seeking a challenging position that utilizes his 5 years of experience managing construction projects. He has a bachelor's degree in civil engineering and certifications in areas like construction supervision, cost estimation, and Autocad. His professional experience includes roles as a resident engineer, site engineer, and trainee where he oversaw projects in water treatment and supply.
CopyofZeeshanAliChannaResume1 (1) (1) (1)
Engr. Zeeshan Ali has over 8 years of experience as a civil engineer working on government and private construction projects in Pakistan, Saudi Arabia, and the UAE. He has experience supervising infrastructure projects such as hospitals, flood protection works, industrial buildings, and residential complexes. His responsibilities have included construction supervision, quality control testing, preparing design plans, and ensuring work is completed according to specifications. He holds a B.E. in Civil Engineering from M.U.E.T Jamshoro, Pakistan and is registered as a professional engineer with the Pakistan Engineering Council.
Recommendation Letter from FABRICOM-GTI-SUEZ
Fabricom G11m is proposing to prefabricate spools in carbon steel and stainless steel with different schedules and bore sizes to be installed on modules for a new refinery in Norway. A reference from P&M Europe Division notes that Fabricom's past performance and conduct on a job was excellent, and they recommend the company for further work.
Recommended
Project Involved in Oil & Gas Industry
This document outlines several oil and gas projects undertaken by three companies - Tanjung Offshore Services Sdn Bhd, EPIC Mushtari Engineering Sdn Bhd, and Ramunia Fabricator Sdn Bhd. It describes projects ranging from wellhead upgrades, piping replacements, and platform maintenance for clients including Petronas Carigali Sdn Bhd, FPSO Ventures Sdn Bhd, and Sarawak Shell Berhad carried out between 2008-2014. The projects involved engineering disciplines like structures, piping, fabrication, and commissioning activities on offshore platforms and vessels.
CV Bernard Graves
Bernard Graves is a British cost estimator with over 30 years of experience in the oil and gas industry. He currently works as a lead estimator for Genesis Oil & Gas Consultants Ltd, where he has performed cost estimates for numerous offshore and onshore projects around the world. Previously, he held estimator and project manager roles for several engineering and construction companies, where he was responsible for capital and operating cost estimates, cost control, and project management.
Projects Involved
The document outlines the work experience and training of a field service erection engineer specializing in turbine blading at GE Power Solutions in Malaysia from May 2014 to present. It lists 14 projects the engineer worked on in various countries involving inspection and upgrades of gas turbine blades. It also lists 9 safety and technical training courses completed, including courses on blading, seals, carriers and base fleet operations at the Alstom training center in Switzerland as well as safety certifications in Malaysia. The engineer has gained extensive experience inspecting and upgrading gas turbine blades on projects across Asia and Europe.
CSM_Profile
CSM Construction provides telecommunications network planning, design, construction, operation and maintenance services. It offers turnkey solutions or customized services for network design, build and maintenance. The company prides itself on executing challenging projects across India with experienced professionals. Its services include civil works, electrical works, cable network installation, and rights of way acquisition. It aims to complete cable laying projects on schedule with customer satisfaction.
Al Qasr Mall presentation
This document provides an overview and status update of the Al Qasr Mall project in Saudi Arabia. It summarizes that the project is 99.6% complete, with construction of core packages finished and critical milestones like energizing transformer rooms achieved. It also lists potential additional works and notes 44.18% of the mall's leasable area is fitted out and ready for tenants. Key pre-opening tasks are still needed before the mall can open.
Abdullah Jaber Civil Eng CV EXP. 5 yrs
Abdullah Jaber is a civil engineer from Jordan seeking a challenging position that utilizes his 5 years of experience managing construction projects. He has a bachelor's degree in civil engineering and certifications in areas like construction supervision, cost estimation, and Autocad. His professional experience includes roles as a resident engineer, site engineer, and trainee where he oversaw projects in water treatment and supply.
CopyofZeeshanAliChannaResume1 (1) (1) (1)
Engr. Zeeshan Ali has over 8 years of experience as a civil engineer working on government and private construction projects in Pakistan, Saudi Arabia, and the UAE. He has experience supervising infrastructure projects such as hospitals, flood protection works, industrial buildings, and residential complexes. His responsibilities have included construction supervision, quality control testing, preparing design plans, and ensuring work is completed according to specifications. He holds a B.E. in Civil Engineering from M.U.E.T Jamshoro, Pakistan and is registered as a professional engineer with the Pakistan Engineering Council.
Recommendation Letter from FABRICOM-GTI-SUEZ
Fabricom G11m is proposing to prefabricate spools in carbon steel and stainless steel with different schedules and bore sizes to be installed on modules for a new refinery in Norway. A reference from P&M Europe Division notes that Fabricom's past performance and conduct on a job was excellent, and they recommend the company for further work.
Faisalaiah project (english) 3 REV.03
This document provides an update on the Design, Construction, Testing & Commissioning of Strategic Reservoirs project in Faisaliah, Jeddah. Key details include:
- Excavation for Tank #1 is 50% complete
- Soil improvement is finished for Tank #3 and approved for Tanks 2 & 4
- Foundation, wall, and piping designs are under review or revision
- 394 workers and 76 pieces of equipment are on site to complete the work
- The project completion date was extended by 9 months to April 23, 2016.
summer internship
This document summarizes a tunnel construction project in Delhi using a Tunnel Boring Machine (TBM). Key details include:
- The project involves tunneling between Motibagh and Lajpatnagar stations on the Delhi Metro Rail system using a TBM to bore two tunnels totaling 9.374 km.
- A production report from May 2015 showed the major activities like excavation and ring building took 33.4% and 19.2% of time respectively, while delays accounted for 38.1% of time.
- Analysis found the main cause of delays was waiting for skips to transport excavated material, so increasing skip rates could save time for critical activities like excavation and ring building.
CV-Atif_Ashraf-4
Atif Ashraf has over 7 years of experience as a civil engineer in Saudi Arabia and Pakistan. He is currently a Civil Inspector for the Municipality of Huraymila in Riyadh, Saudi Arabia, where he supervises construction projects and ensures work is completed according to specifications. Previously, he held roles as a Sub Engineer and Civil Supervisor in Pakistan, overseeing infrastructure projects. He has a Diploma in Civil Technology and skills in AutoCAD, Microsoft Office, and communication in English, Arabic, Urdu, Punjabi, and Hindi.
jyotithakurkumar@gmail.com
This document contains the resume of Jyoti Kumar Thakur, an engineer with over 2 years of experience in structural steel construction. He has worked on projects in the oil, gas, and petrochemical industries. His responsibilities have included site execution, documentation, quality control, safety coordination, and ensuring smooth project operations. He holds a diploma in mechanical engineering and technical skills in AutoCAD. Currently he works as an engineer on a petrochemical complex project for Reliance Industries.
SwartJ-cv (Jan 2016)
Johan Swart is a senior expediter with Foster & Wheeler and has experience leading expediting efforts for Amec on projects in Namibia and Mozambique. He has over 30 years of experience in project planning, coordination, and expediting roles in industries including refining, LNG, power, mining, and chemicals. His background includes roles as an apprentice fitter, planner, project coordinator, and expeditor for companies including Sasol, Murray & Roberts, and Foster & Wheeler. He is currently assisting as lead expediter on the Husab uranium project in Swakopmund, Namibia.
CV WAQAR.
This document is a curriculum vitae that summarizes an individual's qualifications and experience as a senior land surveyor. It includes:
- Over 11 years of total experience, including 5 years of experience in the UAE and Saudi Arabia.
- Academic qualifications including a bachelor's degree in art and diplomas in civil surveying and AutoCAD.
- Details of professional experience on infrastructure projects in the UAE, Saudi Arabia, and Pakistan from 2003 to the present.
- Responsibilities involving surveying, establishing control points, topographic surveys, setting out construction elements, and producing CAD drawings.
Updated CV of Satheeshkumar
This resume is for R. Satheeshkumar, a civil engineer with over 25 years of experience managing construction projects in India and Qatar. He holds a BE in Civil Engineering from Anna University and has worked as a senior project manager or project manager on various residential, commercial, and industrial construction projects. His roles included project execution, budget monitoring, planning, coordination, and ensuring projects were completed per schedule. Currently he works as a senior project manager at Danem Engineering Works in Doha, Qatar and is seeking a new opportunity with an expected salary of 8000 USD per month.
GIRIRAJAN
Girirajan Natarajan has applied for the position of Senior Land Surveyor. He has over 17 years of experience as a land surveyor working on infrastructure projects in Qatar and Kuwait. His experience includes supervising surveying staff, checking contractors' work, and ensuring accuracy of setting out. He is proficient in AutoCAD, Microsoft Office, and surveying instruments including total stations.
GlennN Resume
Nicholas Glenn has less than one year of experience as a junior construction inspector. He has experience inspecting CDOT roadway and culvert projects to ensure contractor compliance with specifications. He is proficient with design software such as AutoCAD and Revit as well as data management software including Excel and Primavera P6. Glenn received a B.S. in Construction Engineering and Management from Virginia Tech in 2015 and is an Engineer in Training in Colorado.
L&T Portfolio
The document discusses Larsen & Toubro Limited's work on the Chennai Metro Rail Project involving the construction of elevated viaduct packages ECV02 and ECV03. It provides an overview of the project scope, including 758 piles, 235 open foundations, 426 piers, 212 precast segment erections, and details some of the construction challenges like working in congested urban areas, through stations, and river crossings. It highlights techniques used like balanced cantilever and segmental construction methods.
LAND SURVEYOR Resume 2013 legat
Sylvain Legat is a Belgian land surveyor with over 20 years of experience working on projects across Europe, Africa, Asia, and the Middle East. He has extensive experience managing survey teams and projects in various industries including construction, oil/gas, mining, transportation, and utilities. Legat holds degrees in land surveying and construction supervision and regularly trains on the latest surveying equipment and software. He is proficient in both English and Dutch.
RESUME RAJBIR SINGH (1)
Rajbir Singh is seeking a leadership position after over 15 years of experience managing electrical engineering projects in India. He has worked as an assistant project manager, area project manager, and senior site engineer on rural electrification projects involving installation of overhead and underground power lines. Rajbir Singh's professional experience includes surveying sites, preparing drawings and budgets, erecting power lines, installing substations, training staff, and documenting projects. He holds a diploma in electrical engineering and seeks a salary commensurate with his experience and qualifications.
Amos_Kivelowitz_Resume
Amos Kivelowitz is seeking a position in Mechanical Engineering Technology with experience in machine design, HVAC systems, and failure analysis. He has a Bachelor's degree in Mechanical Engineering Technology from Rochester Institute of Technology. His experience includes engineering consultant work designing mechanical systems, project coordination installing hoists, and co-op engineering designing bottle rotators and testing pumps.
Senior surveyor ragab atta c.v
1. Study, review (as Consultant) or prepare (as Contractor) Shop Drawings according to Design.
2. Coordination and prepare Composite drawing for all activities.
3. Follow up the construction (as Consultant) or construct (as Contractor) the Surveying works for all activities.
4. Quantities survey for excavations & backfilling by computer programs.
Autodesk Land Desktop program
AutoCAD AutoCAD Civil3D
TERRAMODEL Surfer program
Microsoft windows Microsoft Office
Project Controller
Vinayak K Shenoy has over 16 years of experience in project planning, scheduling, cost control, and contract management for fertilizer, chemical, and petrochemical projects in India and abroad. He currently works as a Deputy General Manager for Praj Industries, where he is responsible for preparing schedules, reviewing contracts, cost control, and progress reporting. Previously he held managerial roles at BASF India and UHDE India, where he managed planning, scheduling, cost control, and progress monitoring for various projects.
Steve Miller CV 2017
Steven is a versatile civil engineer with over 3.5 years of experience in structural design, inspections, site management, and railway engineering. He has strong skills in structural design software like LUSAS and Super Stress. As a site engineer and consultant, he has experience managing labour, tackling challenges, and completing tasks to a high standard with minimal supervision. His most recent roles include designing footbridge strengthening and modular buildings as an assistant engineer at AECOM and managing steel bridge repair projects as an engineer and site agent at Dyer and Butler.
Construction Outlook 2011 - Ernie Swickard (Office of Court Construction Mgmt)
This document provides an overview of California court construction projects from 2001 to 2011. It discusses the establishment of the Court Facilities Master Plans in 2003 and the funding of initial capital projects in 2005. Major legislation included the Trial Court Facilities Act of 2002 and Senate Bill 1407 in 2008, which approved 41 new projects totaling an estimated $5 billion. The document outlines the capital project delivery process, including site acquisition, design phases, bidding, construction, and occupancy. It provides details on several specific court construction projects at different stages and a master schedule of projects through 2011.
Narrow Pavement Widening - San Angelo District
This document discusses two projects involving narrow pavement widening conducted by the San Angelo District. The first project details an in-house method developed using a road widener attachment and conveyor system to widen roads by 2-3 feet at a cost of $2000 and production rate of 0.5 miles per day. The second project discusses the widening of RM 336 from 18-20 feet to 21 feet using a Roadtec milling machine to remove material and widen the road. The RM 336 project cost $145,000 per mile to complete.
57 MAIN ROAD WEST (2)
This floor plan shows the layout of a proposed commercial space. Key features include a unisex toilet for staff, a grease trap under the shed, a tandoor oven, bin storage area, gas burners, a dishwasher, preparation bench, cool room, office, cash register counter, and dining area. The general notes specify that the builder should check all dimensions on site before construction and notify any errors or discrepancies to the architect. Drawings are not to be used for construction until issued for that purpose.
M Halsey CV
Michael Halsey has over 40 years of experience in instrumentation design and engineering. He currently works as an Instrument Designer and Project Engineer for ENG-CAD LTD, where he is responsible for design of control and instrument systems, carrying out site surveys, and producing technical documentation. Previously he held several roles with increasing responsibilities in instrumentation design, project engineering, and CAD operations for offshore oil and gas companies.
Review of PH-16 With CRB.pptx
This document outlines 12 traffic facility works projects in the Phulpur division targeted for completion during 2022-23. It provides details of each project such as name, year of sanction, total cost, amount spent to date, additional funds required, targeted month of completion, and current status. The projects involve development of stacking areas, station remodeling, bypass line construction, yard modifications, approach road improvements, line extensions, and interlocking works to remove bottlenecks and improve train operations in the region. Completion of these infrastructure upgrade projects is aimed to enhance railway network efficiency and capacity in the Phulpur division.
Project Review Meeting - 14.02.23.ppt
This document provides a project summary for the heightening and conversion of existing 220kV and 132kV overhead lines that infringe on the alignment of Pune Metro Line 3. The key details are:
- The project value is INR 1,10,80,08,369 (Rs. 110.80 crores) and is split into 5 packages covering different sections of line.
- The work involves installing 11 monopoles across 3 packages to heighten existing lines and laying 17.3km of underground cable across 2 packages to convert the existing lines.
- Key challenges include securing right of way clearances, obtaining design approvals, and finalizing cable routes and equipment locations. Action plans are in
More Related Content
What's hot
Faisalaiah project (english) 3 REV.03
This document provides an update on the Design, Construction, Testing & Commissioning of Strategic Reservoirs project in Faisaliah, Jeddah. Key details include:
- Excavation for Tank #1 is 50% complete
- Soil improvement is finished for Tank #3 and approved for Tanks 2 & 4
- Foundation, wall, and piping designs are under review or revision
- 394 workers and 76 pieces of equipment are on site to complete the work
- The project completion date was extended by 9 months to April 23, 2016.
summer internship
This document summarizes a tunnel construction project in Delhi using a Tunnel Boring Machine (TBM). Key details include:
- The project involves tunneling between Motibagh and Lajpatnagar stations on the Delhi Metro Rail system using a TBM to bore two tunnels totaling 9.374 km.
- A production report from May 2015 showed the major activities like excavation and ring building took 33.4% and 19.2% of time respectively, while delays accounted for 38.1% of time.
- Analysis found the main cause of delays was waiting for skips to transport excavated material, so increasing skip rates could save time for critical activities like excavation and ring building.
CV-Atif_Ashraf-4
Atif Ashraf has over 7 years of experience as a civil engineer in Saudi Arabia and Pakistan. He is currently a Civil Inspector for the Municipality of Huraymila in Riyadh, Saudi Arabia, where he supervises construction projects and ensures work is completed according to specifications. Previously, he held roles as a Sub Engineer and Civil Supervisor in Pakistan, overseeing infrastructure projects. He has a Diploma in Civil Technology and skills in AutoCAD, Microsoft Office, and communication in English, Arabic, Urdu, Punjabi, and Hindi.
jyotithakurkumar@gmail.com
This document contains the resume of Jyoti Kumar Thakur, an engineer with over 2 years of experience in structural steel construction. He has worked on projects in the oil, gas, and petrochemical industries. His responsibilities have included site execution, documentation, quality control, safety coordination, and ensuring smooth project operations. He holds a diploma in mechanical engineering and technical skills in AutoCAD. Currently he works as an engineer on a petrochemical complex project for Reliance Industries.
SwartJ-cv (Jan 2016)
Johan Swart is a senior expediter with Foster & Wheeler and has experience leading expediting efforts for Amec on projects in Namibia and Mozambique. He has over 30 years of experience in project planning, coordination, and expediting roles in industries including refining, LNG, power, mining, and chemicals. His background includes roles as an apprentice fitter, planner, project coordinator, and expeditor for companies including Sasol, Murray & Roberts, and Foster & Wheeler. He is currently assisting as lead expediter on the Husab uranium project in Swakopmund, Namibia.
CV WAQAR.
This document is a curriculum vitae that summarizes an individual's qualifications and experience as a senior land surveyor. It includes:
- Over 11 years of total experience, including 5 years of experience in the UAE and Saudi Arabia.
- Academic qualifications including a bachelor's degree in art and diplomas in civil surveying and AutoCAD.
- Details of professional experience on infrastructure projects in the UAE, Saudi Arabia, and Pakistan from 2003 to the present.
- Responsibilities involving surveying, establishing control points, topographic surveys, setting out construction elements, and producing CAD drawings.
Updated CV of Satheeshkumar
This resume is for R. Satheeshkumar, a civil engineer with over 25 years of experience managing construction projects in India and Qatar. He holds a BE in Civil Engineering from Anna University and has worked as a senior project manager or project manager on various residential, commercial, and industrial construction projects. His roles included project execution, budget monitoring, planning, coordination, and ensuring projects were completed per schedule. Currently he works as a senior project manager at Danem Engineering Works in Doha, Qatar and is seeking a new opportunity with an expected salary of 8000 USD per month.
GIRIRAJAN
Girirajan Natarajan has applied for the position of Senior Land Surveyor. He has over 17 years of experience as a land surveyor working on infrastructure projects in Qatar and Kuwait. His experience includes supervising surveying staff, checking contractors' work, and ensuring accuracy of setting out. He is proficient in AutoCAD, Microsoft Office, and surveying instruments including total stations.
GlennN Resume
Nicholas Glenn has less than one year of experience as a junior construction inspector. He has experience inspecting CDOT roadway and culvert projects to ensure contractor compliance with specifications. He is proficient with design software such as AutoCAD and Revit as well as data management software including Excel and Primavera P6. Glenn received a B.S. in Construction Engineering and Management from Virginia Tech in 2015 and is an Engineer in Training in Colorado.
L&T Portfolio
The document discusses Larsen & Toubro Limited's work on the Chennai Metro Rail Project involving the construction of elevated viaduct packages ECV02 and ECV03. It provides an overview of the project scope, including 758 piles, 235 open foundations, 426 piers, 212 precast segment erections, and details some of the construction challenges like working in congested urban areas, through stations, and river crossings. It highlights techniques used like balanced cantilever and segmental construction methods.
LAND SURVEYOR Resume 2013 legat
Sylvain Legat is a Belgian land surveyor with over 20 years of experience working on projects across Europe, Africa, Asia, and the Middle East. He has extensive experience managing survey teams and projects in various industries including construction, oil/gas, mining, transportation, and utilities. Legat holds degrees in land surveying and construction supervision and regularly trains on the latest surveying equipment and software. He is proficient in both English and Dutch.
RESUME RAJBIR SINGH (1)
Rajbir Singh is seeking a leadership position after over 15 years of experience managing electrical engineering projects in India. He has worked as an assistant project manager, area project manager, and senior site engineer on rural electrification projects involving installation of overhead and underground power lines. Rajbir Singh's professional experience includes surveying sites, preparing drawings and budgets, erecting power lines, installing substations, training staff, and documenting projects. He holds a diploma in electrical engineering and seeks a salary commensurate with his experience and qualifications.
Amos_Kivelowitz_Resume
Amos Kivelowitz is seeking a position in Mechanical Engineering Technology with experience in machine design, HVAC systems, and failure analysis. He has a Bachelor's degree in Mechanical Engineering Technology from Rochester Institute of Technology. His experience includes engineering consultant work designing mechanical systems, project coordination installing hoists, and co-op engineering designing bottle rotators and testing pumps.
Senior surveyor ragab atta c.v
1. Study, review (as Consultant) or prepare (as Contractor) Shop Drawings according to Design.
2. Coordination and prepare Composite drawing for all activities.
3. Follow up the construction (as Consultant) or construct (as Contractor) the Surveying works for all activities.
4. Quantities survey for excavations & backfilling by computer programs.
Autodesk Land Desktop program
AutoCAD AutoCAD Civil3D
TERRAMODEL Surfer program
Microsoft windows Microsoft Office
Project Controller
Vinayak K Shenoy has over 16 years of experience in project planning, scheduling, cost control, and contract management for fertilizer, chemical, and petrochemical projects in India and abroad. He currently works as a Deputy General Manager for Praj Industries, where he is responsible for preparing schedules, reviewing contracts, cost control, and progress reporting. Previously he held managerial roles at BASF India and UHDE India, where he managed planning, scheduling, cost control, and progress monitoring for various projects.
Steve Miller CV 2017
Steven is a versatile civil engineer with over 3.5 years of experience in structural design, inspections, site management, and railway engineering. He has strong skills in structural design software like LUSAS and Super Stress. As a site engineer and consultant, he has experience managing labour, tackling challenges, and completing tasks to a high standard with minimal supervision. His most recent roles include designing footbridge strengthening and modular buildings as an assistant engineer at AECOM and managing steel bridge repair projects as an engineer and site agent at Dyer and Butler.
Construction Outlook 2011 - Ernie Swickard (Office of Court Construction Mgmt)
This document provides an overview of California court construction projects from 2001 to 2011. It discusses the establishment of the Court Facilities Master Plans in 2003 and the funding of initial capital projects in 2005. Major legislation included the Trial Court Facilities Act of 2002 and Senate Bill 1407 in 2008, which approved 41 new projects totaling an estimated $5 billion. The document outlines the capital project delivery process, including site acquisition, design phases, bidding, construction, and occupancy. It provides details on several specific court construction projects at different stages and a master schedule of projects through 2011.
Narrow Pavement Widening - San Angelo District
This document discusses two projects involving narrow pavement widening conducted by the San Angelo District. The first project details an in-house method developed using a road widener attachment and conveyor system to widen roads by 2-3 feet at a cost of $2000 and production rate of 0.5 miles per day. The second project discusses the widening of RM 336 from 18-20 feet to 21 feet using a Roadtec milling machine to remove material and widen the road. The RM 336 project cost $145,000 per mile to complete.
57 MAIN ROAD WEST (2)
This floor plan shows the layout of a proposed commercial space. Key features include a unisex toilet for staff, a grease trap under the shed, a tandoor oven, bin storage area, gas burners, a dishwasher, preparation bench, cool room, office, cash register counter, and dining area. The general notes specify that the builder should check all dimensions on site before construction and notify any errors or discrepancies to the architect. Drawings are not to be used for construction until issued for that purpose.
M Halsey CV
Michael Halsey has over 40 years of experience in instrumentation design and engineering. He currently works as an Instrument Designer and Project Engineer for ENG-CAD LTD, where he is responsible for design of control and instrument systems, carrying out site surveys, and producing technical documentation. Previously he held several roles with increasing responsibilities in instrumentation design, project engineering, and CAD operations for offshore oil and gas companies.
What's hot (20)
Construction Outlook 2011 - Ernie Swickard (Office of Court Construction Mgmt)
Construction Outlook 2011 - Ernie Swickard (Office of Court Construction Mgmt)
Similar to 03 06-2021
Review of PH-16 With CRB.pptx
This document outlines 12 traffic facility works projects in the Phulpur division targeted for completion during 2022-23. It provides details of each project such as name, year of sanction, total cost, amount spent to date, additional funds required, targeted month of completion, and current status. The projects involve development of stacking areas, station remodeling, bypass line construction, yard modifications, approach road improvements, line extensions, and interlocking works to remove bottlenecks and improve train operations in the region. Completion of these infrastructure upgrade projects is aimed to enhance railway network efficiency and capacity in the Phulpur division.
Project Review Meeting - 14.02.23.ppt
This document provides a project summary for the heightening and conversion of existing 220kV and 132kV overhead lines that infringe on the alignment of Pune Metro Line 3. The key details are:
- The project value is INR 1,10,80,08,369 (Rs. 110.80 crores) and is split into 5 packages covering different sections of line.
- The work involves installing 11 monopoles across 3 packages to heighten existing lines and laying 17.3km of underground cable across 2 packages to convert the existing lines.
- Key challenges include securing right of way clearances, obtaining design approvals, and finalizing cable routes and equipment locations. Action plans are in
General Project report standing abrevation stock fy mou rt if olc hgf hhb h ...
dsgghs jbgscjbbvc jhbjsbcb jhbjbc jnb cb bbsn bcb hbjbcb kjb hb jcbbbh bb b nmbscbch hb scb b bsnsvsf gjbnkb ghnbbiuuhcosj uhkjgfbdlddvbvihnb jnh jhj ubjnhgbdbyj 89jfbf uib kjhjhjhh hhhjsbhjuic hfvnk jhhdh jh hnnd jifh jhjnnh khjkbjjnklj jkbu dsgghs jbgscjbbvc jhbjsbcb jhbjbc jnb cb bbsn bcb hbjbcb kjb hb jcbbbh bb b nmbscbch hb scb b bsnsvsf gjbnkb ghnbbiuuhcosj uhkjgfbdlddvbvihnb jnh jhj ubjnhgbdbyj 89jfbf uib kjhjhjhh hhhjsbhjuic hfvnk jhhdh jh hnnd jifh jhjnnh khjkbjjnklj jkbu dsgghs jbgscjbbvc jhbjsbcb jhbjbc jnb cb bbsn bcb hbjbcb kjb hb jcbbbh bb b nmbscbch hb scb b bsnsvsf gjbnkb ghnbbiuuhcosj uhkjgfbdlddvbvihnb jnh jhj ubjnhgbdbyj 89jfbf uib kjhjhjhh hhhjsbhjuic hfvnk jhhdh jh hnnd jifh jhjnnh khjkbjjnklj jkbu dsgghs jbgscjbbvc jhbjsbcb jhbjbc jnb cb bbsn bcb hbjbcb kjb hb jcbbbh bb b nmbscbch hb scb b bsnsvsf gjbnkb ghnbbiuuhcosj uhkjgfbdlddvbvihnb jnh jhj ubjnhgbdbyj 89jfbf uib kjhjhjhh hhhjsbhjuic hfvnk jhhdh jh hnnd jifh jhjnnh khjkbjjnklj jkbu chjvfjkvmn njdnjvnjkbv nvbjk ofjvbjkfb gdhgg hbb jhbjbb jhjghg hgvvgcn jvh
MCV
This CV summarizes the professional experience of Mr. Mudassar Iqbal, a Pakistani civil engineer with over 20 years of experience in construction project management in Saudi Arabia, Qatar, UAE, and Pakistan. He has managed a variety of large-scale construction projects including oil refineries, power plants, hotels, and infrastructure projects. His responsibilities have included overseeing construction activities, coordinating with subcontractors, ensuring quality standards, and project completion. Currently he works as the Construction Manager for a hotel project in Riyadh, Saudi Arabia.
Ahmed el gohary cv
This document is a curriculum vitae for Ahmed Refaat El Gohary. It summarizes his contact information, career objective, education, languages, and work experience over 13 years as a civil engineer. His most recent role is as a civil engineer for Alexandria Carbon Black in Egypt since 2012, where he is responsible for civil works, maintenance, and coordinating with contractors. He holds a B.Sc. in Civil Engineering from Alexandria University in Egypt.
cv بدون
Osama Ali Mohamed Hammam is an Egyptian civil engineer with over 15 years of experience as a site engineer and executive manager on various construction projects in Egypt and Saudi Arabia. He has a bachelor's degree in civil engineering from Zagazig University and is proficient in AutoCAD, Microsoft Office, and spoken/written English. His work experience includes projects such as schools, factories, water and sewage lines. He is skilled at project management, teamwork, problem-solving, and adapting to new tasks. References and certificates are available upon request.
Bill ure cv 31 08-16
I am a time served mechanical engineer with experience in the oil & gas industry & In the recycling process plants.
NIZAM ENTERPRISE profile (1)
Nizam Enterprise provides engineering design and drawing services. They are looking to support clients by designing projects that comply with industry standards and safety aspects. The company has over 10 years experience in structural design engineering, pipeline drawing, and site administration. They have handled numerous projects in the oil and gas sector involving structural design, 3D modeling, general arrangement drawings, and construction administration. Contact information is provided for Nizam Enterprise and a secondary contact at Lantana Services.
Project management report of stadium
Simplest report of project management which propose the cost and other things to contractor as a project manager.
ayman y7ia
Ayman Yahia Hassan is seeking a career opportunity in a stable organization. He has over 10 years of experience in quality control and assurance roles on infrastructure and construction projects in Egypt, Qatar, and the United States. He holds a Bachelor's degree in civil engineering and is proficient in Arabic and English.
CONSTRUCTION PRESENTATION
This document is a weekly progress report from L&T Construction for the Design & Build of the Free Trade Warehousing Zone at JNPT, Mumbai project dated December 12-18, 2022. It provides details on EHS, overall progress, scheduling, approvals, finishing schedules, resources and quality. Key activities ongoing include deep cleaning, de-snagging, final coat painting, granite fixing, and MEP works across warehouses and administration buildings. Approvals for lifts, CEIG and chimney are also discussed.
Buildings so r 14 15
This document provides guidelines for the Buildings Schedule of Rates for 2014-2015 (Buildings SoR: 2014-15) in Andhra Pradesh, India.
It establishes a committee of chief engineers to finalize building rates. Rates from the Common SoR 2014-15 for labor, materials, and equipment remain applicable. Overheads and contractor profit of 14% apply to building works.
The document outlines what is covered by overheads, such as site setup, office costs, supervision, documentation, mobilization, camps, vehicles, testing, tools, insurance, and taxes. Allowances may apply for labor in municipal or tribal areas. Rates for ready mix concrete are also included.
CV _Abdullah_Highway Design Engineer
Abdullah has over 25 years of experience as a highway designer and engineer. He has extensive experience designing highways in Bangladesh and Afghanistan using software such as MX Road. Some of his past projects include designing a 550km highway in Afghanistan for ADB and an 111km road in Bangladesh as part of a climate resilience project financed by ADB. He is proficient in tasks like survey data checking, digital terrain modeling, horizontal and vertical alignment design, and producing plans, profiles, and cross-sections.
status report.pdf
This document provides a status report on various construction projects for Nova Design Build across multiple sites. It lists 17 total tasks or issues across projects in Annex C, Linac Block, Main Block, Warangal, Omega Kurnool, Mahendra Hills, MLA House, Rakesh Villa, and Dr. Kiran's House. For each task, it provides information on the current status, who is responsible for follow up action, initial and revised committed dates, and any relevant remarks or dependencies. The majority of tasks are still in progress, with some open, some pending dependent works, and a few that have been closed out recently.
CV-Priono_Update
This resume summarizes Yono W. Priono's professional experience as a piping engineer and lead designer working on oil and gas projects in Indonesia over 25 years. Some of the key projects listed include the Suban Compression Project, Corridor Gas Mercury Removal Project, West Belut Project, and Suban Long Term Water Disposal Project while working at ConocoPhillips Indonesia from 2007 to present. Prior experience includes working on the South Jambi "B" Shallow Gas Project, Suban Phase I Gas Project, and Sumpal Gas Project while at Gulf Indonesia Resources Ltd from 1996 to 2003. The resume lists his responsibilities, which include design reviews, coordinating contractors, and providing deliverables
ANPARA D FGD PPT 07.06.2023-M (2).pptx
The chairman reviewed the FGD project at Anpara power plant. Based on the contractor's revised schedule, the expected completion dates for the two units are June 2024 and September 2024, which is later than the previous dates. The project progress is currently at 33% overall. Several milestones are delayed compared to the original schedule. The contractor has deployed 413 workers which is less than the promised 500. Critical issues include a subcontractor stopping work due to payment issues and insufficient material and equipment. The contractor has also submitted a claim notice seeking an equitable price adjustment of over USD 10 million and INR 232 crores citing unforeseen conditions and changes in law.
GOPAL
This curriculum vitae summarizes the qualifications and experience of G. Subramanian applying for a Senior Land Surveyor position. He has 13 years of total experience, including 9 years working on survey projects in Gulf countries like Qatar, Oman, Kuwait, and Saudi Arabia. His technical qualifications include a Diploma in Civil Engineering and certifications in GPS, total station, and CAD software. He has extensive experience setting out infrastructure like roads, pipelines, and buildings using surveying equipment and software.
elsayed cv last
Elsayed Ahmed Hegazy has over 17 years of experience as a civil construction site supervisor. He has worked on numerous projects in Egypt, Kuwait, UAE, and Oman for companies including Kharafi National, CCC, and ABB. Currently he is a Superintended for Kharafi National working on pipeline installation projects in Kuwait. He has extensive experience overseeing civil works such as foundations, piping, reinforced concrete, and architecture.
Rajib Ali CV (Final)
Rajib Ali Kehar is seeking an entry-level position in a national or multinational organization. He has over 18 years of experience as a surveyor and supervisor on various infrastructure projects in Pakistan including barrages, bridges, roads, buildings, and transmission lines. He is proficient in surveying software like AutoCAD, Eagle Point, and Prolink and has experience using total stations and theodolites.
NEMER- CV - 16
Nemer Abuhajar has over 21 years of experience as an MEP Project/Operations Manager. He holds a B.Sc. in Electrical Engineering and has managed numerous projects in Qatar and Jordan involving piping, equipment installation, and MEP works. His responsibilities included management, engineering, procurement, construction, pre-commissioning, commissioning, and start-up of projects in industries such as oil and gas, mining, and utilities.
Similar to 03 06-2021 (20)
General Project report standing abrevation stock fy mou rt if olc hgf hhb h ...
General Project report standing abrevation stock fy mou rt if olc hgf hhb h ...
Recently uploaded
一比一原版(CalArts毕业证)加利福尼亚艺术学院毕业证如何办理
CalArts毕业证学历书【微信95270640】CalArts毕业证’圣力嘉学院毕业证《Q微信95270640》办理CalArts毕业证√文凭学历制作{CalArts文凭}购买学历学位证书本科硕士,CalArts毕业证学历学位证【实体公司】办毕业证、成绩单、学历认证、学位证、文凭认证、办留信网认证、（网上可查，实体公司，专业可靠）
(诚招代理)办理国外高校毕业证成绩单文凭学位证,真实使馆公证（留学回国人员证明）真实留信网认证国外学历学位认证雅思代考国外学校代申请名校保录开请假条改GPA改成绩ID卡
1.高仿业务:【本科硕士】毕业证,成绩单（GPA修改）,学历认证（教育部认证）,大学Offer,,ID,留信认证,使馆认证,雅思,语言证书等高仿类证书；
2.认证服务: 学历认证（教育部认证）,大使馆认证（回国人员证明）,留信认证（可查有编号证书）,大学保录取,雅思保分成绩单。
3.技术服务：钢印水印烫金激光防伪凹凸版设计印刷激凸温感光标底纹镭射速度快。
办理加利福尼亚艺术学院加利福尼亚艺术学院毕业证文凭证书流程：
1客户提供办理信息：姓名生日专业学位毕业时间等（如信息不确定可以咨询顾问：我们有专业老师帮你查询）；
2开始安排制作毕业证成绩单电子图；
3毕业证成绩单电子版做好以后发送给您确认；
4毕业证成绩单电子版您确认信息无误之后安排制作成品；
5成品做好拍照或者视频给您确认；
6快递给客户（国内顺丰国外DHLUPS等快读邮寄）
-办理真实使馆公证（即留学回国人员证明）
-办理各国各大学文凭（世界名校一对一专业服务,可全程监控跟踪进度）
-全套服务：毕业证成绩单真实使馆公证真实教育部认证。让您回国发展信心十足！
（详情请加一下 文凭顾问+微信:95270640）欢迎咨询！子小伍玩小伍比山娃小一岁虎头虎脑的很霸气父亲让山娃跟小伍去夏令营听课山娃很高兴夏令营就设在附近一所小学山娃发现那所小学比自己的学校更大更美操场上还铺有塑胶跑道呢里面很多小朋友一班一班的快快乐乐原来城里娃都藏这儿来了怪不得平时见不到他们山娃恍然大悟起来吹拉弹唱琴棋书画山娃都不懂却什么都想学山娃怨自己太笨什么都不会斟酌再三山娃终于选定了学美术当听说每月要交元时父亲犹豫了山娃也说爸算了吧咱学校一学期才转
UNLOCKING HEALTHCARE 4.0: NAVIGATING CRITICAL SUCCESS FACTORS FOR EFFECTIVE I...
The Fourth Industrial Revolution is transforming industries, including healthcare, by integrating digital,
physical, and biological technologies. This study examines the integration of 4.0 technologies into
healthcare, identifying success factors and challenges through interviews with 70 stakeholders from 33
countries. Healthcare is evolving significantly, with varied objectives across nations aiming to improve
population health. The study explores stakeholders' perceptions on critical success factors, identifying
challenges such as insufficiently trained personnel, organizational silos, and structural barriers to data
exchange. Facilitators for integration include cost reduction initiatives and interoperability policies.
Technologies like IoT, Big Data, AI, Machine Learning, and robotics enhance diagnostics, treatment
precision, and real-time monitoring, reducing errors and optimizing resource utilization. Automation
improves employee satisfaction and patient care, while Blockchain and telemedicine drive cost reductions.
Successful integration requires skilled professionals and supportive policies, promising efficient resource
use, lower error rates, and accelerated processes, leading to optimized global healthcare outcomes.
Computational Engineering IITH Presentation
This Presentation will give you a brief idea about what Computational Engineering at IIT Hyderabad has to offer.
The Python for beginners. This is an advance computer language.
Python language is very important language at this time. we can easily understand this language by these notes.
Unit-III-ELECTROCHEMICAL STORAGE DEVICES.ppt
Batteries -Introduction – Types of Batteries – discharging and charging of battery - characteristics of battery –battery rating- various tests on battery- – Primary battery: silver button cell- Secondary battery :Ni-Cd battery-modern battery: lithium ion battery-maintenance of batteries-choices of batteries for electric vehicle applications.
Fuel Cells: Introduction- importance and classification of fuel cells - description, principle, components, applications of fuel cells: H2-O2 fuel cell, alkaline fuel cell, molten carbonate fuel cell and direct methanol fuel cells.
Casting-Defect-inSlab continuous casting.pdf
Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting
Advanced control scheme of doubly fed induction generator for wind turbine us...
This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
Slides for the 4th Presentation on LLM Fine-Tuning with QLoRA Presented by Anant, featuring DataStax Astra
学校原版美国波士顿大学毕业证学历学位证书原版一模一样
原版一模一样【微信：741003700 】【美国波士顿大学毕业证学历学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
哪里办理(csu毕业证书)查尔斯特大学毕业证硕士学历原版一模一样
原版一模一样【微信：741003700 】【(csu毕业证书)查尔斯特大学毕业证硕士学历】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Embedded machine learning-based road conditions and driving behavior monitoring
Car accident rates have increased in recent years, resulting in losses in human lives, properties, and other financial costs. An embedded machine learning-based system is developed to address this critical issue. The system can monitor road conditions, detect driving patterns, and identify aggressive driving behaviors. The system is based on neural networks trained on a comprehensive dataset of driving events, driving styles, and road conditions. The system effectively detects potential risks and helps mitigate the frequency and impact of accidents. The primary goal is to ensure the safety of drivers and vehicles. Collecting data involved gathering information on three key road events: normal street and normal drive, speed bumps, circular yellow speed bumps, and three aggressive driving actions: sudden start, sudden stop, and sudden entry. The gathered data is processed and analyzed using a machine learning system designed for limited power and memory devices. The developed system resulted in 91.9% accuracy, 93.6% precision, and 92% recall. The achieved inference time on an Arduino Nano 33 BLE Sense with a 32-bit CPU running at 64 MHz is 34 ms and requires 2.6 kB peak RAM and 139.9 kB program flash memory, making it suitable for resource-constrained embedded systems.
International Conference on NLP, Artificial Intelligence, Machine Learning an...
International Conference on NLP, Artificial Intelligence, Machine Learning and Applications (NLAIM 2024) offers a premier global platform for exchanging insights and findings in the theory, methodology, and applications of NLP, Artificial Intelligence, Machine Learning, and their applications. The conference seeks substantial contributions across all key domains of NLP, Artificial Intelligence, Machine Learning, and their practical applications, aiming to foster both theoretical advancements and real-world implementations. With a focus on facilitating collaboration between researchers and practitioners from academia and industry, the conference serves as a nexus for sharing the latest developments in the field.
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Medical image analysis has witnessed significant advancements with deep learning techniques. In the domain of brain tumor segmentation, the ability to
precisely delineate tumor boundaries from magnetic resonance imaging (MRI)
scans holds profound implications for diagnosis. This study presents an ensemble convolutional neural network (CNN) with transfer learning, integrating
the state-of-the-art Deeplabv3+ architecture with the ResNet18 backbone. The
model is rigorously trained and evaluated, exhibiting remarkable performance
metrics, including an impressive global accuracy of 99.286%, a high-class accuracy of 82.191%, a mean intersection over union (IoU) of 79.900%, a weighted
IoU of 98.620%, and a Boundary F1 (BF) score of 83.303%. Notably, a detailed comparative analysis with existing methods showcases the superiority of
our proposed model. These findings underscore the model’s competence in precise brain tumor localization, underscoring its potential to revolutionize medical
image analysis and enhance healthcare outcomes. This research paves the way
for future exploration and optimization of advanced CNN models in medical
imaging, emphasizing addressing false positives and resource efficiency.
Recently uploaded (20)
UNLOCKING HEALTHCARE 4.0: NAVIGATING CRITICAL SUCCESS FACTORS FOR EFFECTIVE I...
UNLOCKING HEALTHCARE 4.0: NAVIGATING CRITICAL SUCCESS FACTORS FOR EFFECTIVE I...
The Python for beginners. This is an advance computer language.
The Python for beginners. This is an advance computer language.
john krisinger-the science and history of the alcoholic beverage.pptx
john krisinger-the science and history of the alcoholic beverage.pptx
gray level transformation unit 3(image processing))
gray level transformation unit 3(image processing))
Manufacturing Process of molasses based distillery ppt.pptx
Manufacturing Process of molasses based distillery ppt.pptx
Advanced control scheme of doubly fed induction generator for wind turbine us...
Advanced control scheme of doubly fed induction generator for wind turbine us...
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
Embedded machine learning-based road conditions and driving behavior monitoring
Embedded machine learning-based road conditions and driving behavior monitoring
International Conference on NLP, Artificial Intelligence, Machine Learning an...
International Conference on NLP, Artificial Intelligence, Machine Learning an...
ML Based Model for NIDS MSc Updated Presentation.v2.pptx
ML Based Model for NIDS MSc Updated Presentation.v2.pptx
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
03 06-2021
- 1. Project - CP- SEZ Client - CaterPillar Signs Pvt Ltd PMC - Sakshaam Consultancy Architect & Structure - VMS Engineering & Design Services (P) Ltd Project By - Alok Infracon Pvt Ltd Sr No Activity Target Target Date 1 Back Filling @ Plinth Level From Grid C/M To 1/8 Will Be Done 09-06-2021 2 GSB Lying From Grid F-M To 1-8 Will Be Done (Part 1 To Part 4 ) 09-06-2021 3 Floor PCC From Grid F-M To 1-8 Will Be Done (Part 1 To Part 4 ) 09-06-2021 4 Shuttering Work Part - 1 Slab Part -1 From Grid J/M - 1/4.5 09-06-2021 Part -2 From Grid J/M - 4.5/8 Running Column Up Tp GF Slab 1st Flight Of All Will Be Done & 2nd Flight From C To M 09-06-2021 5 Reinforcement Work Part -1 Slab It Will Be Start 09-06-2021 Column Up Tp GF Slab It Will Be Done From A To M & 1 To 8 09-06-2021 6 Concrete Work Column Up Tp GF Slab 1st Flight Of All Will Be Done & 2nd Flight From C To M 09-06-2021 7 Anti Termite Treatment From Grid F-A To 1-8 Will Be Done (Part 1 To Part 4 ) 09-06-2021 8 Brick Work Outer Side Brick Work Will Be Done 10-06-2021 ALOK INFRACON PVT LTD NEXT WEEK SCHEDULE FROM 03-06-2021 TO 09-06-2021