003948_Old Treasury Building 17
•
0 likes•126 views
This document contains plans and details for a reflection pond, including: - Plan and section drawings showing the layout of the pond with granite pavers, benches, and lighting features - Details of the pond construction including a fibreglass drain liner, waterproof membrane, and overflow drain - Specifications for the granite and pedestals materials, and references to structural documents for supports.
Report
Share
Report
Share
Download to read offline
Recommended
Rda standard-drawings-
This document provides details for the construction of slab culverts and box culverts, including layout plans, sections, reinforcement details and notes. It includes information on typical abutment and headwall layouts, culvert dimensions, rebar specifications, concrete grades, embedment and protection. Reinforcement schedules are provided for slab and box culvert sections of varying sizes, as well as headwalls, wingwalls and parapets. Construction notes specify requirements for dimensions, materials, cover thickness and refer to other related drawings.
150506_PRIME LINE WORK DR-TR-05
The document lists various plant types and quantities to be used in a landscape design. It includes 16 types of shrubs with quantities ranging from 6 to 50. It also lists 15 types of trees with quantities ranging from 1 to 32. Materials include turf grass and various sized pots for the plantings.
150319_Phar lap concept_PP_baldivis
The document is a location plan for the Tuart Ridge Estate Main Street concept from March 2015. It includes a legend describing various elements like exposed concrete mixes, urban stone pavers, bicycle racks, and rendered blockwork planters. It also shows sections A and A1 depicting how the road surface lifts and drops down in certain areas and includes elements like a plaza with raised wall seating and artwork.
150115_Osbourne concept REV A
This landscape concept document contains a diagram and list of proposed landscape elements for an Osbourne residence, including:
1) A corten fire bowl, existing tree, BBQ, timber crate seat, and timber slat artwork in the backyard.
2) Proposed additions of native violet groundcover, stepping stones, clothes line, fence covered by climber and green fern wall.
3) A custom timber seat/storage with retaining wall, herb/vegetable garden, corten retaining wall, tall bamboo screening hedge, timber seat/pool cover storage, and 1.8m timber fence panel and gate.
151019_Shaftesbury%20Ave_Hydrozone
The document outlines plans to upgrade Shaftesbury Avenue Reserve in South Perth. It details that the irrigation system will be upgraded and hydrozoned to reduce overall water usage while maintaining park quality. All existing trees will be retained and new native trees planted. Garden beds with low-water plants and native species will increase biodiversity. New paths, seating, and a multi-use court will improve amenity. The upgrades are scheduled for construction in Summer 2015-2016.
140804_Leeman concept layout low res pdf
The document proposes landscape improvements to the Leeman Foreshore area. It includes formalizing and installing landscaping in existing and proposed carparks, creating pedestrian routes and paths, installing fencing and retaining walls to protect dune vegetation, screening views, improving beach access with dune rehabilitation planting, reducing turf areas, adding trees for shade and wind protection, and improving the skate park area, playground, picnic areas and shelters. A comprehensive master plan is recommended to incorporate all proposed civil and landscape works.
150702_OSB_LPLAN - 1 to 75 at A1
The document provides a planting plan and legend for a landscape design project located at 34 Abordale Street, Floreat, WA. It includes a list of over 50 different plant species to be used in the design along with their quantities. It also notes various hard landscape elements like retaining walls, a pool, decking, and pavers. The legend provides symbols and abbreviations for all materials. The notes provide instructions regarding set out, services, referencing contract documents, discrepancies, standards, and requiring service location prior to commencing works.
151125_V2_Copley_natureplay_concepts
The document is a landscape concept plan for Copley Park Nature Playground. It includes a list of proposed surface materials and play items for the playground, such as grass, granite boulders, timber structures, sand, and limestone pathways. A diagram illustrates the proposed layout of the play area, showing the location and placement of various play equipment and features including a timber rope climber, tree trunk steppers, swings, sand pits, and seating areas.
Recommended
Rda standard-drawings-
This document provides details for the construction of slab culverts and box culverts, including layout plans, sections, reinforcement details and notes. It includes information on typical abutment and headwall layouts, culvert dimensions, rebar specifications, concrete grades, embedment and protection. Reinforcement schedules are provided for slab and box culvert sections of varying sizes, as well as headwalls, wingwalls and parapets. Construction notes specify requirements for dimensions, materials, cover thickness and refer to other related drawings.
150506_PRIME LINE WORK DR-TR-05
The document lists various plant types and quantities to be used in a landscape design. It includes 16 types of shrubs with quantities ranging from 6 to 50. It also lists 15 types of trees with quantities ranging from 1 to 32. Materials include turf grass and various sized pots for the plantings.
150319_Phar lap concept_PP_baldivis
The document is a location plan for the Tuart Ridge Estate Main Street concept from March 2015. It includes a legend describing various elements like exposed concrete mixes, urban stone pavers, bicycle racks, and rendered blockwork planters. It also shows sections A and A1 depicting how the road surface lifts and drops down in certain areas and includes elements like a plaza with raised wall seating and artwork.
150115_Osbourne concept REV A
This landscape concept document contains a diagram and list of proposed landscape elements for an Osbourne residence, including:
1) A corten fire bowl, existing tree, BBQ, timber crate seat, and timber slat artwork in the backyard.
2) Proposed additions of native violet groundcover, stepping stones, clothes line, fence covered by climber and green fern wall.
3) A custom timber seat/storage with retaining wall, herb/vegetable garden, corten retaining wall, tall bamboo screening hedge, timber seat/pool cover storage, and 1.8m timber fence panel and gate.
151019_Shaftesbury%20Ave_Hydrozone
The document outlines plans to upgrade Shaftesbury Avenue Reserve in South Perth. It details that the irrigation system will be upgraded and hydrozoned to reduce overall water usage while maintaining park quality. All existing trees will be retained and new native trees planted. Garden beds with low-water plants and native species will increase biodiversity. New paths, seating, and a multi-use court will improve amenity. The upgrades are scheduled for construction in Summer 2015-2016.
140804_Leeman concept layout low res pdf
The document proposes landscape improvements to the Leeman Foreshore area. It includes formalizing and installing landscaping in existing and proposed carparks, creating pedestrian routes and paths, installing fencing and retaining walls to protect dune vegetation, screening views, improving beach access with dune rehabilitation planting, reducing turf areas, adding trees for shade and wind protection, and improving the skate park area, playground, picnic areas and shelters. A comprehensive master plan is recommended to incorporate all proposed civil and landscape works.
150702_OSB_LPLAN - 1 to 75 at A1
The document provides a planting plan and legend for a landscape design project located at 34 Abordale Street, Floreat, WA. It includes a list of over 50 different plant species to be used in the design along with their quantities. It also notes various hard landscape elements like retaining walls, a pool, decking, and pavers. The legend provides symbols and abbreviations for all materials. The notes provide instructions regarding set out, services, referencing contract documents, discrepancies, standards, and requiring service location prior to commencing works.
151125_V2_Copley_natureplay_concepts
The document is a landscape concept plan for Copley Park Nature Playground. It includes a list of proposed surface materials and play items for the playground, such as grass, granite boulders, timber structures, sand, and limestone pathways. A diagram illustrates the proposed layout of the play area, showing the location and placement of various play equipment and features including a timber rope climber, tree trunk steppers, swings, sand pits, and seating areas.
GA-01.pdf
The document contains architectural drawings showing sections and details of proposed building foundations and structures. It includes 5 sections and 2 details of foundations, showing elements like rubble masonry walls, isolation joints, ground floor slabs, sand and polythene layers. It also provides notes on dimensions, materials, specifications, and abbreviations. The scale of the drawings ranges from 1:5 to 1:30.
Red Reedbuck Bush Lodge
This document contains site plans, floor plans, and elevations for a proposed bush camp project in Lesoma, Zimbabwe. It includes:
- A site plan at a scale of 1:500 showing the layout of the main building, staff accommodation, tent units, parking, and other site features.
- Floor plans at 1:75 scale of the main building interior layout and tent unit layout.
- Elevations, sections, and construction details at various scales showing wall, roof, and foundation construction methods using sandbags and timber frames.
- A schedule listing the areas of the different structures, number of parking spaces, and revisions made to the drawings.
LDavis_work_examples
This document contains work examples and specifications for manufacturing turbine blades and related components out of nickel alloys like Inconel. It includes summaries of 4 product launches for OEM manufacturing of turbine blades and compressor discs and 1 for component repair. It also provides details on the materials, number of operations, and specifications for components like dimensions, tolerances and surface finishes. Engineering drawings with additional details are referenced.
BSP Chamber Final 1
This document provides a piping schematic for a BSP Chamber Pipework system. It includes labels for pipe sizes and components such as flanges, reducers, elbows, valves, and dismantling joints. Notes specify weld and paint standards to be followed for construction.
SAMPLE REVIT DRAWINGS-SUNIT K DHINGRA-COMPLETE - EASTWOODS
This document contains plans and details for basement construction including sump pits. Key information includes:
1) Dimensions and details for two sump pits, including reinforced concrete construction and connection to drainage.
2) Sections and construction details for the basement slab, walls, and connection to overlying floors including use of waterproof concrete and insulation.
3) Notes specifying use of a waterproofing system from Pudlo for the basement concrete structures.
Landscape architecture Portfolio 2018
Leen Maraqa
Supervisor: Dr. Rami Daher
AUB, Faculty of Agricultural and Food Sciences
Department of Landscape Design and Ecosystem Management
May 2018
MARA - Design Development Portfolio
- The document appears to be architectural plans and details for a proposed childcare centre. It includes existing and proposed floor plans, elevations, fencing details and construction details.
- Floor plans show room layouts and spaces for 16-18 children in different age groups, as well as staff areas, outdoor spaces and 21 parking spaces.
- Elevations depict the building design and materials, and shadow diagrams illustrate the impact on neighboring properties.
- Fencing and construction details provide specifications for fences, roofs and walls to meet acoustic and building requirements.
Amaia Scapes Twin Pod Housing Plan Design
The document contains plans and specifications for the construction of a residential building including:
- A site plan showing the layout of the building structures and surrounding areas.
- Floor plans showing the layout and dimensions of rooms.
- Elevations depicting the exterior views of the building.
- Sections through the building illustrating structural details.
- Schedules with information like material specifications and dimensions of building components.
EJECTOR-ASSEMBLY.PDF
The document includes an exploded view diagram, bill of materials table, and multiple engineering drawings for an ejector assembly. The exploded view shows the 17 individual parts that make up the assembly and their positioning. The bill of materials lists each of the 17 parts with information like item number, part number, description, material, and quantity. The engineering drawings provide additional views and specifications for several of the individual parts that make up the ejector assembly.
3 Baobabs Lodge As Built
The document is a drawing list for a project titled "3 BAOBABS - AS BUILT PLANS". It includes 6 drawings:
1) Managers House + Workshop plans, sections and elevations
2) Staff + Kitchen plans, sections and elevations
3) Guest Tents plans, sections and elevations
4) Site Plan showing building layout
5) Location Plan showing site in relation to nearby towns
6) Main Tent plans per manufacturer specs
Khupe River Lodge
The document is a site plan for a proposed tourism development at Plot 106-RO in the Kazungula Ferry Precinct in March 2015. It shows plans for a camp site area with chalets, meru tents, a conference center, parking areas, and walking trails. Infrastructure is also shown including access roads, a wastewater treatment plant, and electricity and water connections. Dimensions and areas of buildings and facilities are specified. The site plan is at a scale of 1:500, with additional location plans at scales of 1:5000 and 1:10000.
Dick Smith
This document contains plans and specifications for a Dicksmith store renovation project. It includes a cover page, drawing list, feasibility plan, floor plan, and notes. The feasibility plan provides fixture layout and quantities. The floor plan shows the proposed flooring materials for each area. Notes provide instructions and requirements for the project.
Ananth.K.Samy_PRo_Sample
The document contains shop drawings for a steel sliding gate, including plans, elevations, sections, and details. It includes dimensions for the gate frame, track profile, and foundations. Notes indicate the gate frame will be enamel painted and powered by an automation system. Reinforcing exposed in foundations will be welded to support rails and plates, with gaps grouted later. The drawings are reviewed for compliance with specifications and contract documents.
BOQ - 945.23 Rev.00 - Warehouse - Colombia.pdf
This document provides drawings for a proposed warehouse steel structure project located in Colombia. The drawings include plans for the column layout, mezzanine floor, roof sheeting, elevations, and sections. Notes provide specifications for materials, welding, bolts, and tolerances. Dimensions and views are shown at scales of 1:100 and 1:150. The general contractor for the project is P.K.
Brisbane ferries project drawings
This document provides a cover sheet and legend for architectural drawings for a new CityCat ferry terminal. It includes a project description, list of drawings, abbreviations legend and general notes. The legend defines abbreviations used on the drawings and notes provide guidance on materials and construction methods. The project involves construction of a new ferry terminal with waiting area, gangway, pontoon and associated infrastructure at Macarthur Avenue, Hamilton QLD.
25-AHUH 7600 CFM 150 SP
This document provides specifications for an air handling unit including:
1) Dimensions of 4824mm length, 1565mm width, and 1400+100mm height. It has a airflow capacity of 7600 CFM.
2) It includes prefilters, fine filters, heating and cooling coils, and fans. The heating coil has 4 rows and the cooling coil has 6 rows.
3) Technical details are provided like motor power, fan speed, coil specifications, insulation thickness, air velocities, and materials used.
STEEL BUILDING DETAILs -006.pdf
The document contains architectural drawings for a construction project including:
1. Elevation drawings showing structural members and dimensions.
2. Floor framing plans identifying beam and joist components.
3. Schedules listing structural members and their properties.
4. Details of reinforcement, bracing installation, and structural connections.
Lot 280 Bogdanich way
The document provides plans and details for a proposed residential development including a house, garage, alfresco area, and pool. It includes a site plan at a scale of 1:100 showing the layout of the property and location of structures, elevations of all sides of the building, a section detail, and floor plans of the buildings. Dimensions and materials are specified. The documents are intended to support a planning application for the development.
Architecture Portfolio
This document contains architectural drawings and details for a proposed office block. It includes floor plans showing room layouts and dimensions, elevations of the building, and section drawings showing structural details. Notes provide information on compliance with building codes and regulations regarding structures, materials, lighting and ventilation, fire safety, and other requirements. Schedules list dimensions for stairways and other elements. The drawings and notes provide technical specifications and compliance details for the proposed office block design.
Lcl users manual electrical drawings
This document contains a list of part numbers, revisions, pages and titles for various electrical drawings related to a DataPlace LCL system. It includes assemblies for printed circuit boards, electrical panels, sensors and other electrical and electronic components. Revisions provide information on changes made to drawings and released versions.
04093_Interp appendix2
This document contains concepts for elements of the Esperance waterfront redevelopment illustrated through a series of figures. The figures explore design ideas for different areas and features of the waterfront including open spaces, pathways, and recreational facilities.
More Related Content
Similar to 003948_Old Treasury Building 17
GA-01.pdf
The document contains architectural drawings showing sections and details of proposed building foundations and structures. It includes 5 sections and 2 details of foundations, showing elements like rubble masonry walls, isolation joints, ground floor slabs, sand and polythene layers. It also provides notes on dimensions, materials, specifications, and abbreviations. The scale of the drawings ranges from 1:5 to 1:30.
Red Reedbuck Bush Lodge
This document contains site plans, floor plans, and elevations for a proposed bush camp project in Lesoma, Zimbabwe. It includes:
- A site plan at a scale of 1:500 showing the layout of the main building, staff accommodation, tent units, parking, and other site features.
- Floor plans at 1:75 scale of the main building interior layout and tent unit layout.
- Elevations, sections, and construction details at various scales showing wall, roof, and foundation construction methods using sandbags and timber frames.
- A schedule listing the areas of the different structures, number of parking spaces, and revisions made to the drawings.
LDavis_work_examples
This document contains work examples and specifications for manufacturing turbine blades and related components out of nickel alloys like Inconel. It includes summaries of 4 product launches for OEM manufacturing of turbine blades and compressor discs and 1 for component repair. It also provides details on the materials, number of operations, and specifications for components like dimensions, tolerances and surface finishes. Engineering drawings with additional details are referenced.
BSP Chamber Final 1
This document provides a piping schematic for a BSP Chamber Pipework system. It includes labels for pipe sizes and components such as flanges, reducers, elbows, valves, and dismantling joints. Notes specify weld and paint standards to be followed for construction.
SAMPLE REVIT DRAWINGS-SUNIT K DHINGRA-COMPLETE - EASTWOODS
This document contains plans and details for basement construction including sump pits. Key information includes:
1) Dimensions and details for two sump pits, including reinforced concrete construction and connection to drainage.
2) Sections and construction details for the basement slab, walls, and connection to overlying floors including use of waterproof concrete and insulation.
3) Notes specifying use of a waterproofing system from Pudlo for the basement concrete structures.
Landscape architecture Portfolio 2018
Leen Maraqa
Supervisor: Dr. Rami Daher
AUB, Faculty of Agricultural and Food Sciences
Department of Landscape Design and Ecosystem Management
May 2018
MARA - Design Development Portfolio
- The document appears to be architectural plans and details for a proposed childcare centre. It includes existing and proposed floor plans, elevations, fencing details and construction details.
- Floor plans show room layouts and spaces for 16-18 children in different age groups, as well as staff areas, outdoor spaces and 21 parking spaces.
- Elevations depict the building design and materials, and shadow diagrams illustrate the impact on neighboring properties.
- Fencing and construction details provide specifications for fences, roofs and walls to meet acoustic and building requirements.
Amaia Scapes Twin Pod Housing Plan Design
The document contains plans and specifications for the construction of a residential building including:
- A site plan showing the layout of the building structures and surrounding areas.
- Floor plans showing the layout and dimensions of rooms.
- Elevations depicting the exterior views of the building.
- Sections through the building illustrating structural details.
- Schedules with information like material specifications and dimensions of building components.
EJECTOR-ASSEMBLY.PDF
The document includes an exploded view diagram, bill of materials table, and multiple engineering drawings for an ejector assembly. The exploded view shows the 17 individual parts that make up the assembly and their positioning. The bill of materials lists each of the 17 parts with information like item number, part number, description, material, and quantity. The engineering drawings provide additional views and specifications for several of the individual parts that make up the ejector assembly.
3 Baobabs Lodge As Built
The document is a drawing list for a project titled "3 BAOBABS - AS BUILT PLANS". It includes 6 drawings:
1) Managers House + Workshop plans, sections and elevations
2) Staff + Kitchen plans, sections and elevations
3) Guest Tents plans, sections and elevations
4) Site Plan showing building layout
5) Location Plan showing site in relation to nearby towns
6) Main Tent plans per manufacturer specs
Khupe River Lodge
The document is a site plan for a proposed tourism development at Plot 106-RO in the Kazungula Ferry Precinct in March 2015. It shows plans for a camp site area with chalets, meru tents, a conference center, parking areas, and walking trails. Infrastructure is also shown including access roads, a wastewater treatment plant, and electricity and water connections. Dimensions and areas of buildings and facilities are specified. The site plan is at a scale of 1:500, with additional location plans at scales of 1:5000 and 1:10000.
Dick Smith
This document contains plans and specifications for a Dicksmith store renovation project. It includes a cover page, drawing list, feasibility plan, floor plan, and notes. The feasibility plan provides fixture layout and quantities. The floor plan shows the proposed flooring materials for each area. Notes provide instructions and requirements for the project.
Ananth.K.Samy_PRo_Sample
The document contains shop drawings for a steel sliding gate, including plans, elevations, sections, and details. It includes dimensions for the gate frame, track profile, and foundations. Notes indicate the gate frame will be enamel painted and powered by an automation system. Reinforcing exposed in foundations will be welded to support rails and plates, with gaps grouted later. The drawings are reviewed for compliance with specifications and contract documents.
BOQ - 945.23 Rev.00 - Warehouse - Colombia.pdf
This document provides drawings for a proposed warehouse steel structure project located in Colombia. The drawings include plans for the column layout, mezzanine floor, roof sheeting, elevations, and sections. Notes provide specifications for materials, welding, bolts, and tolerances. Dimensions and views are shown at scales of 1:100 and 1:150. The general contractor for the project is P.K.
Brisbane ferries project drawings
This document provides a cover sheet and legend for architectural drawings for a new CityCat ferry terminal. It includes a project description, list of drawings, abbreviations legend and general notes. The legend defines abbreviations used on the drawings and notes provide guidance on materials and construction methods. The project involves construction of a new ferry terminal with waiting area, gangway, pontoon and associated infrastructure at Macarthur Avenue, Hamilton QLD.
25-AHUH 7600 CFM 150 SP
This document provides specifications for an air handling unit including:
1) Dimensions of 4824mm length, 1565mm width, and 1400+100mm height. It has a airflow capacity of 7600 CFM.
2) It includes prefilters, fine filters, heating and cooling coils, and fans. The heating coil has 4 rows and the cooling coil has 6 rows.
3) Technical details are provided like motor power, fan speed, coil specifications, insulation thickness, air velocities, and materials used.
STEEL BUILDING DETAILs -006.pdf
The document contains architectural drawings for a construction project including:
1. Elevation drawings showing structural members and dimensions.
2. Floor framing plans identifying beam and joist components.
3. Schedules listing structural members and their properties.
4. Details of reinforcement, bracing installation, and structural connections.
Lot 280 Bogdanich way
The document provides plans and details for a proposed residential development including a house, garage, alfresco area, and pool. It includes a site plan at a scale of 1:100 showing the layout of the property and location of structures, elevations of all sides of the building, a section detail, and floor plans of the buildings. Dimensions and materials are specified. The documents are intended to support a planning application for the development.
Architecture Portfolio
This document contains architectural drawings and details for a proposed office block. It includes floor plans showing room layouts and dimensions, elevations of the building, and section drawings showing structural details. Notes provide information on compliance with building codes and regulations regarding structures, materials, lighting and ventilation, fire safety, and other requirements. Schedules list dimensions for stairways and other elements. The drawings and notes provide technical specifications and compliance details for the proposed office block design.
Lcl users manual electrical drawings
This document contains a list of part numbers, revisions, pages and titles for various electrical drawings related to a DataPlace LCL system. It includes assemblies for printed circuit boards, electrical panels, sensors and other electrical and electronic components. Revisions provide information on changes made to drawings and released versions.
Similar to 003948_Old Treasury Building 17 (20)
SAMPLE REVIT DRAWINGS-SUNIT K DHINGRA-COMPLETE - EASTWOODS
SAMPLE REVIT DRAWINGS-SUNIT K DHINGRA-COMPLETE - EASTWOODS
More from Mark Jumeaux
04093_Interp appendix2
This document contains concepts for elements of the Esperance waterfront redevelopment illustrated through a series of figures. The figures explore design ideas for different areas and features of the waterfront including open spaces, pathways, and recreational facilities.
140721_node explanation
This document is a landscape design proposal for a median island on Leahy Street in Dalwallinu. The proposal includes using crushed local rock as mulch with a formed steel edge. It also features stone accents and low ground-cover planting. Drainage from the road will be directed into the median island through a break in the curb.
151012_bayview public info sheet
Proposed decorative planters and seating are to be installed around the existing "Ooh la la" artwork in Bay view Tce. The plan view shows the layout of the proposed decorative planters and seating around the artwork. For more information, contact Andrew Head, Manager Parks and Environment at the City of Claremont.
150729_BVT planter box
This document provides design plans from Folium Landscape Architecture for planter boxes and seating areas at Bay View Terrace. The plans include views from multiple angles and a key plan showing the layout. New raised planters and a curved seat will be added, and an existing sculpture will be relocated as shown in the design from July 2015.
151120_Marapikurrinya_Community Concept_Web file
This document is a concept plan for a nature play area called Marapikurrinya Park in Port Hedland, Western Australia. The plan proposes a design inspired by passing bulk carriers at the adjacent port. Key elements include a timber ship bow accessible by ramp and ladder, a timber wheel house and bridge at the ship's stern accessible by ramp and ladder, and a central area with a pyramid climbing net and sand pit or rubber soft-fall area. Local plant species and rock would be used throughout, with small local eucalyptus trees providing shade. The goal is to source equipment from custom and manufactured items to create a nature play space themed around ships.
140731_A4_Mary street_Rev1
This landscape plan proposes treatments for Mary Street Reserve, including exposed aggregate paving, feature pavers or cobbles, a circular timber table, curved timber seating, olive trees, and a Viburnum tinus hedge. A location plan and detail plan at a scale of 1:100 are provided, with the location plan also at a scale of 1:750. The plan was developed from a concept supplied by the Town of Claremont and issued on July 31, 2014.
More from Mark Jumeaux (7)
003948_Old Treasury Building 17
- 1. RL 15.86 01 REFLECTION POND SECTION Scale: 1:10- WL 16.11 RL 15.86 RL 16.26 LED STRIP LIGHT CLIPPED TO UNDERSIDE OF BENCH TO AECOM SPECIFICATIONS 100-170MM BUZON DPH-5 PEDESTAL WITH 10MM SPACERS 40MM AUSTRAL VERDE PAVER FIBREGLASS DRAIN LINER TO POOL CONSULTANTS SPECIFICATION POND WATER PROOF MEMBRANE POND SCREED SLAB MEMBRANE SS LEAF CATCHER TO POOL CONSULTANTS SPECIFICATION SS ANGLE SUPPORTED OVERHANG 700 150 60 200 310 200 PODIUM STRUCTURAL SLAB. REFER TO STRUCTURAL DOCUMENTATIONS/S 30MM DIA. SLEEVED AND CHEMSET TO CONCRETE POOL FORM 100 100250350 3 X AUSTRAL VERDE GRANITE, FLAMED FINISH BENCH SEATS 2185 X 700 X 150 SKATESTOP MAX SSM. 610mm LONG. FOR SPACINGS REFER TO WALL DETAIL PLANS. REFER TO MANUFACTURERS SPECIFICATION FOR INSTALLATION DETAILS 50 FIBREGLASS DRAIN LINER TO POOL CONSULTANTS SPECIFICATION AUSTRAL VERDE GRANITE CLADDING 2185 RAISED AUSTRAL VERDE FALSE POND BASE INTERNAL GALVANISED STEEL SUPPORT FRAME AS PER STRUCTURAL ENGINEERS SPECIFICATION AUSTRAL VERDE GRANITE SLAB, WITH INTERNAL REBATE FOR STRUCTURAL SUPPORT. BUTT JOINT WITH NEXT SLAB. AUSTRAL VERDE CLAD INFINITY EDGE REFLECTION POND 40MM WIDE OVERFLOW COLLECTION DRAIN 04 REFLECTION POND PERSPECTIVE Scale: NOT TO SCALE- AUSTRAL VERDE 800X390X400 PEDESTAL MOUNTED, GRANTE PAVER WITH 10MM GAP TO PERMIT WATER FLOW BEANEATH. 100 170-290MM BUZON DPH-6 PEDESTAL WITH 10MM SPACERS 810 1062 800 10 390 655410410 REMOVABLE PIT COVERS 397X797X400,REFER TO POOL CONSULTANT DRAWINGS FOR LOCATIONS SUPPORTING S/STEEL POSTS SHOWN ALONG LENGTH OF GRANITE BENCH 2185 X 700 X 150. 6500 2185 810 00 - 02 REFLECTION POND PLAN DETAILS Scale: 1:25- 3 X AUSTRAL VERDE GRANITE, FLAMED FINISH BENCH SEATS 2185 X 700 X 150. AUSTRAL VERDE GRANITE, FLAMED FINISH SLABS 800 X390 X40. 03 REFLECTION POND PLAN DETAILS Scale: 1:25- 21852185 1 ISSUE FOR REVIEW 60% 21.112012 ISSUE FOR CO-ORDINATION4 ISSUE FOR CO-ORDINATION3 PRE AFC2 12.12.2012 06.12.1012 30.11.2012 4 REFERENCE MAP NORTH NOTES DATEDESCRIPTIONREV CONSULTANT PROJECT DRAWING TITLE DRAWNSCALE @ A1 CO-ORD REVIEWED APPROVED DRAWING NUMBERPROJECT NUMBER REV STATUS 1. DO NOT SCALE DRAWINGS. WRITTEN DIMENSIONS GOVERN. 2. ALL DIMENSIONS ARE IN MILLIMETRES UNLESS NOTED OTHERWISE. 3. ALL DIMENSIONS SHALL BE VERIFIED ON SITE BEFORE PROCEEDING WITH THE WORK. HASSELL SHALL BE NOTIFIED IN WRITING OF ANY DISCREPANCIES. 4. THIS DRAWING MUST BE READ IN CONJUNCTION WITH ALL RELEVANT CONTRACTS, SPECIFICATIONS AND DRAWINGS. 2012 HASSELL. LTD. THIS DRAWING IS AN UNCONTROLLED COPY. UNLESS NOTED OTHERWISE. HASSELL LIMITED ACN 007 711 435 PODIUM LEVEL CENTRAL PARK 152-158 ST GEORGES TERRACE PERTH WA 6000 AUSTRALIA PERTH@HASSELLSTUDIO.COM T 61 8 6477 6000 F 61 8 9322 2330